Replace regexp with string match to workaround dejagnu 1.4.4 which
complains:
ERROR: bad switch "-fPIE": must be -all, -about, -indices, -inline, -expanded, -line, -linestop, -lineanchor, -nocase, -start, or --
* testsuite/ld-i386/i386.exp (undefined_weak): Replace regexp
with string match.
* testsuite/ld-x86-64/x86-64.exp (undefined_weak): Likewise.
Run pr22001-1b on x32 since R_X86_64_32S relocation can be turned into
dynamic R_X86_64_32 relocation which won't overflow on x32.
* testsuite/ld-x86-64/x86-64.exp: Run pr22001-1b on x32.
On x86-64, when -z nocopyreloc is used to build executable, relocations
may overflow at run-time or may not be resolved without PIC. This patch
checks these conditions and issues an error with suggestion for -fPIC.
bfd/
PR ld/22001
* elf64-x86-64.c (elf_x86_64_relocate_section): Check for
R_X86_64_PC32 relocation run-time overflow and unresolvable
R_X86_64_32S relocation with -z nocopyreloc.
ld/
PR ld/22001
* testsuite/ld-i386/i386.exp: Run -z nocopyreloc tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* ld/testsuite/ld-i386/pr22001-1a.c: New file.
* ld/testsuite/ld-i386/pr22001-1b.c: Likewise.
* ld/testsuite/ld-i386/pr22001-1c.S: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1c.c: Likewise.
When processing an orphan section we first call lang_place_orphans, this
function handles a few sections for which the behaviour is known COMMON
sections, or sections marked as SEC_EXCLUDE.
Any orphans that are not handled in lang_place_orphans are passed on to
ldlang_place_orphan, this is where we decide where to put the orphan,
and then call lang_add_section to perform the actual orphan placement.
We previously had a larger set of checks at the start of the function
lang_add_section to discard some sections that we _knew_ should not be
added into the output file, this was where .group sections (in a final
link) and .debug* sections (with --strip-debug) were dropped.
The problem with dropping these sections at the lang_add_section stage
is that a user might also be using --orphan-handling=error to prevent
orphans. If they are then they should not be get errors about sections
that we know will be discarded, and which are not mentioned in the
linker script.
The solution proposed in this patch is to move the "will this section be
discarded" check into a separate function, and use this in
lang_place_orphans to have the early discard phase discard sections that
we know should not be included in the output file.
ld/ChangeLog:
PR 21961
* ldlang.c (lang_discard_section_p): New function.
(lang_add_section): Checks moved out into new function, which is
now called.
(lang_place_orphans): Call lang_discard_section_p instead of
duplicating some of the checks from lang_add_section.
* testsuite/ld-elf/orphan-11.d: New file.
* testsuite/ld-elf/orphan-11.ld: New file.
* testsuite/ld-elf/orphan-11.s: New file.
* testsuite/ld-elf/orphan-12.d: New file.
* testsuite/ld-elf/orphan-12.s: New file.
git commit 46434633f9 said
Make undefined symbols in allocate_dynrelocs dynamic
..if they have dynamic relocs. An undefined symbol in a PIC object
that finds no definition ought to become dynamic in order to support
--allow-shlib-undefined, but there is nothing in the generic ELF
linker code to do this if the reference isn't via the GOT or PLT. (An
initialized function pointer is an example.) So it falls to backend
code to ensure the symbol is made dynamic.
The above isn't true. Undefined symbols are indeed made dynamic for
shared libraries. Undefined symbols are not automatically made
dynamic in executables, and it was the PIE case that triggered an
internal consistency assertion on powerpc64. I guess I could have
jumped the other way when fixing PR21988, and not created a dynamic
reloc. Either way, it doesn't matter a great deal. We're going to
get an error on strong undefined symbols in an executable anyway, and
broken binaries if you try to use --unresolved-symbols=ignore-all to
disable the error.
* testsuite/ld-undefined/fundef.s: New test.
* testsuite/ld-undefined/undefined.exp: Test that undefined
symbols in shared libraries are made dynamic.
Add '\' before -- to workaround dejagnu 1.4.4 which complains:
ERROR: bad switch "--no-define-common may not be used without -shared":...
* testsuite/ld-elf/pr21903c.d: Add '\' before --.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
-fPIC may be needed to compile PIE or PDE objects, not just shared
object.
bfd/
* elf64-x86-64.c (elf_x86_64_need_pic): Add an argument for
bfd_link_info. Report shared, PIE or PDE object based on
bfd_link_info.
(elf_x86_64_check_relocs): Update elf_x86_64_need_pic call.
(elf_x86_64_relocate_section): Likewise.
ld/
* testsuite/ld-x86-64/pie2.d: Updated.
* testsuite/ld-x86-64/pr19719.d: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19969.d: Likewise.
When GNU_PROPERTY_NO_COPY_ON_PROTECTED is set, it indicates that there
are no copy relocations against protected data symbols. When linker
sees GNU_PROPERTY_NO_COPY_ON_PROTECTED on any input relocatable file,
it sets extern_protected_data to FALSE.
bfd/
* elf32-i386.c (elf_i386_link_setup_gnu_properties): Set
extern_protected_data to FALSE if GNU_PROPERTY_NO_COPY_ON_PROTECTED
is set on any input relocatable file.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run protected7.
* testsuite/ld-i386/protected7.d: New file.
* testsuite/ld-i386/protected7.s: Likewise.
* testsuite/ld-x86-64/protected8.d: Likewise.
* testsuite/ld-x86-64/protected8.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run protected8.
Until all .eh_frame sections have been edited we don't know their
sizes. So it isn't possible to properly decide whether a non-empty
.eh_frame section follows a given section until editing is complete.
bfd/
PR 21441
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Don't add
alignment padding here.
* elflink.c (bfd_elf_discard_info): Add .eh_frame padding here
in a reverse pass over sections.
ld/
PR 21441
* testsuite/ld-x86-64/pr21038a.d: Adjust.
* testsuite/ld-x86-64/pr21038a-now.d: Adjust.
OUTPUT_FORMAT in linker script of PR ld/21884 tests is needed to trigger
PR ld/21884. Restore linker scripts and add nacl versions of the same
tests.
* testsuite/ld-i386/i386.exp: Run pr21884-nacl.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21884.d: Don't run on nacl targets.
* testsuite/ld-x86-64/pr21884.d: Likewise.
* testsuite/ld-i386/pr21884.t: Revert the last change.
* testsuite/ld-x86-64/pr21884.t: Likewise.
* testsuite/ld-i386/pr21884-nacl.d: New file.
* testsuite/ld-i386/pr21884-nacl.t: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.d: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.t: Likewise.
OUTPUT_FORMAT in the script results in "./ld-new: target elf32-i386
not found" and similarly for the x86_64 test.
* testsuite/ld-i386/pr21884.t: Remove unneeded format, arch and entry.
* testsuite/ld-x86-64/pr21884.t: Likewise.
* emultempl/elf32.em (handle_option): Accept the -z globalaudit
command line option.
* lexsup.c (elf_static_list_options): Add -z globalaudit.
* ld.texinfo: Document the support for the new command line
option.
* NEWS: Mention the new feature.
* testsuite/ld-elf/audit.exp: Add a test of the -z globalaudit
command line option.
* testsuite/ld-elf/globalaudit.rd: New file: Expected output from
readelf.
When --enable-shared is used, ./ld-new may be a shell script and the
real linker is .libs/ld-new. We should check .libs/ld-new first.
* testsuite/config/default.exp (LD_CLASS): Check .libs/ld-new
for linker first.
PR ld/17618 test requires 64-bit linker to run. Set LD_CLASS to "64bit"
for 64-bit ELF linker and run PR ld/17618 test only if $LD_CLASS is
"64bit". More checks can be added to support 64-bit linkers in non-ELF
format.
* testsuite/config/default.exp (LD_CLASS): New. Set to "64bit"
for 64-bit ELF linker.
* testsuite/ld-x86-64/pr17618.d (#notarget): Removed.
* testsuite/ld-x86-64/x86-64.exp: Run pr17618 only for 64-bit
linker.
Require GCC 5 or above for 3 x86 tests which fail with GCC 4.9.3.
PR ld/21924
* testsuite/ld-i386/i386.exp: Require GCC 5 or above for
"weakundef1 with PIE" test.
* testsuite/ld-x86-64/tls.exp: Require GCC 5 or above for
"tlsdesc1" and "tlsdesc1 with PIE" tests.
These were discovered when running --hash-style=gnu as default, the
previous batch being --hash-style=both.
* testsuite/ld-aarch64/ifunc-1-local.d: Run ld with --hash-style=sysv.
* testsuite/ld-aarch64/ifunc-2-local.d: Likewise.
* testsuite/ld-aarch64/ifunc-3a.d: Likewise.
* testsuite/ld-frv/fdpic-pie-1.d: Likewise.
* testsuite/ld-frv/fdpic-pie-2.d: Likewise.
* testsuite/ld-frv/fdpic-pie-7.d: Likewise.
* testsuite/ld-frv/fdpic-pie-8.d: Likewise.
* testsuite/ld-arm/arm-elf.exp: Add --hash-style=sysv to "Using
Thumb lib by another lib" test's ld options.
* testsuite/ld-elf/note-3.l: Match .gnu.hash.
* testsuite/ld-elf/note-3.t: Add .gnu.hash output section.
When --no-define-common is used to build shared library, treat common
symbol as undefined so that common symbols that are referenced from a
shared library to be assigned addresses only in the main program. This
eliminates the unused duplicate space in the shared library, and also
prevents any possible confusion over resolving to the wrong duplicate
when there are many dynamic modules with specialized search paths for
runtime symbol resolution.
--no-define-common is only allowed when building a shared library.
bfd/
PR ld/21903:
* elflink.c (elf_link_add_object_symbols): Treat common symbol
as undefined for --no-define-common.
include/
PR ld/21903:
* bfdlink.h (bfd_link_info): Add inhibit_common_definition.
ld/
PR ld/21903:
* ld.h (command_line): Remove inhibit_common_definition.
* ldgram.y: Replace command_line.inhibit_common_definition with
link_info.inhibit_common_definition.
* ldlang.c (lang_common): Likewise.
* lexsup.c (parse_args): Likewise.
* ldmain.c (main): Only allow --no-define-common with -shared.
* testsuite/ld-elf/pr21903.s: New file.
* testsuite/ld-elf/pr21903a.d: Likewise.
* testsuite/ld-elf/pr21903b.d: Likewise.
* testsuite/ld-elf/pr21903c.d: Likewise.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
The base bfd_link_hash_table works fine here, the only thing to watch
out for is to only set elf_gp if the output is ELF.
bfd/
* elf32-hppa.c (elf32_hppa_set_gp): Don't require an
hppa_link_hash_table.
ld/
* testsuite/ld-unique/pr21529.d: Don't xfail hppa.
"ld -d" assigns space to common symbols even if a relocatable output
file is specified (with '-r').
PR ld/21904
* testsuite/ld-elf/pr21904.d: New file.
* testsuite/ld-elf/pr21904.s: Likewise.
PR ld/21884
* testsuite/ld-elf/pr21884.d: Add AVR, HPPA, IA64, M68HC1x and
SCORE to list of targets not supporting file format changes during
linking.
* testsuite/ld-unique/pr21529.d: Likewise.
* emultempl/avrelf.em (_before_allocation): Skip for non-ELF
output formats.
(avr_elf_create_output_section_statements): Fail if the output
format is not ELF.
(avr_finish): Do not access the ELF header in non-ELF format
output bfds.
* emultempl/m68hc1xelf.em (_before_allocation): Skip for non-ELF
output formats.
(m68hc11elf_create_output_section_statements): Fail if the putput
format is not ELF.
(m68hc11elf_after_allocation): Skip for non-ELF output formats.
* ldgram.y (ldgram_had_keep): Make static.
(ldgram_vers_current_lang): Likewise.
(filename_spec): New rule.
(input_section_spec_no_keep): Use filename_spec.
(wildcard_maybe_exclude): New rule.
(wildcard_spec): Rename to...
(section_name_spec): ...this.
(section_NAME_list): Rename to...
(section_name_list): ...this.
(section_name_spec): Simplifiy and use wildcard_maybe_exclude.
* ldlang.c (placed_commons): Delete.
(lang_add_wild): No longer set placed_commons.
(print_wild_statement): Use full names for SORT specifiers.
* testsuite/ld-scripts/align.exp: Run new tests.
* testsuite/ld-scripts/align3.d: New file.
* testsuite/ld-scripts/align3.t: New file.
* testsuite/ld-scripts/align4.d: New file.
* testsuite/ld-scripts/align4.t: New file.
* testsuite/ld-scripts/align5.d: New file.
* testsuite/ld-scripts/align5.t: New file.
* testsuite/ld-scripts/exclude-file-5.d: New file.
* testsuite/ld-scripts/exclude-file-5.map: New file.
* testsuite/ld-scripts/exclude-file-5.t: New file.
* testsuite/ld-scripts/exclude-file-6.d: New file.
* testsuite/ld-scripts/exclude-file-6.map: New file.
* testsuite/ld-scripts/exclude-file-6.t: New file.
* NEWS: Mention the changes.
Since the __tls_get_addr_opt stub saves LR and makes a call, eh_frame
info should be generated to describe how to unwind through the stub.
The patch also changes the way the backend iterates over stubs, from
looking at all sections in stub_bfd to which all dynamic sections are
attached as well, to iterating over the group list, which gets just
the stub sections. Most binaries will have just one or two stub
groups, so this is a little faster.
bfd/
* elf64-ppc.c (struct map_stub): Add tls_get_addr_opt_bctrl.
(stub_eh_frame_size): New function.
(ppc_size_one_stub): Set group tls_get_addr_opt_bctrl.
(group_sections): Init group tls_get_addr_opt_bctrl.
(ppc64_elf_size_stubs): Update sizing and initialization of
.eh_frame. Iteration over stubs via group list.
(ppc64_elf_build_stubs): Iterate over stubs via group list.
(ppc64_elf_finish_dynamic_sections): Update finalization of
.eh_frame.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Add cfi.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt5.wf: New file.
* testsuite/ld-powerpc/powerpc.exp: Perform new tlsopt5 test.
A set of small patches that are fixing big-endian observed errors.
ld/
2017-07-24 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/jli-overflow.d: Force testing for little
endian.
* testsuite/ld-arc/tls_gd-01.d: Fix string to match bigendian
systems.
* testsuite/ld-arc/tls_ie-01.d: Fix test for bigendian systems.
Complement commit ffe54b3798 ("Pad sections according to current
script FILL.") and add a FILL script statement test for targets that
impose the minimum alignment of more than 2**2 for the `.text' section.
These targets include IA-64 targets, MIPS targets other than bare-metal
ELF and VxWorks, TILE-Gx targets, TILEPro targets and X86-64 PE targets.
Use the `notarget' tag for configuration triplets that are incompatible
with the new test, but are supported by the existing FILL test, and
`xfail' for ones that have issues due to section alignment or padding
with both tests. Make a complementary change to the existing FILL test,
removing the following test issues:
arm-epoc-pe -FAIL: ld-scripts/fill
mips-elf -XPASS: ld-scripts/fill
mips-img-elf -XPASS: ld-scripts/fill
mips-mti-elf -XPASS: ld-scripts/fill
mips-sde-elf -XPASS: ld-scripts/fill
mips-vxworks -XPASS: ld-scripts/fill
mipsel-elf -XPASS: ld-scripts/fill
mipsel-img-elf -XPASS: ld-scripts/fill
mipsel-mti-elf -XPASS: ld-scripts/fill
mipsel-vxworks -XPASS: ld-scripts/fill
mipsisa32-elf -XPASS: ld-scripts/fill
mipsisa32el-elf -XPASS: ld-scripts/fill
mipsisa64-elf -XPASS: ld-scripts/fill
mipsisa64el-elf -XPASS: ld-scripts/fill
tilegx-linux -FAIL: ld-scripts/fill
tilepro-elf -FAIL: ld-scripts/fill
tx39-elf -XPASS: ld-scripts/fill
ld/
* testsuite/ld-scripts/fill.d: Adjust `xfail' entries. Add
`notarget' entries. Update comments.
* testsuite/ld-scripts/fill16.d: New test.
* testsuite/ld-scripts/fill16_0.s: New test source.
* testsuite/ld-scripts/fill16_1.s: New test source.
* testsuite/ld-scripts/fill16_2.s: New test source.
* testsuite/ld-scripts/data.exp: Run the new test.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
Complement commit d345186d05 ("Check if GNU_RELRO segment is is
generated") and exclude the presence of a `.got' section from implying
the creation of a GNU_RELRO segment for targets which place the section
along with small data, and therefore as it stands cannot have the
section assigned to GNU_RELRO. This is because we currently only
support a single GNU_RELRO segment and we place it at the beginning of
regular data which is then separated from small data by read-write data.
Currently the list of such targets consists of Alpha, Linux HPPA, NetBSD
HPPA, OpenBSD HPPA, Meta, MIPS, Nios II, OpenRISC 1000, RISC-V, SH and
X86-64, as determined by examining default linker scripts produced in a
`--enable-targets=all' build for those that have DATA_SEGMENT_RELRO_END
set and `.got' placed beyond. These targets do not set NO_SMALL_DATA or
DATA_GOT in their respective files in ld/emulparams/*, hovever checking
for the absence of these settings on its own is not very feasible due to
the structure of these files and the lack of support for GNU_RELRO by
some targets in the first place.
Add a separate control for `.got.plt' which does get placed in GNU_RELRO
on MIPS targets even though `.got' does not.
ld/
* testsuite/ld-elf/binutils.exp (binutils_test): Make the
expectation for `.got' in GNU_RELRO segment target-specific.
Handle `.got.plt' separately.
Complement commit d345186d05 ("Check if GNU_RELRO segment is is
generated") and exclude the presence of a `.dynamic' section from
implying the creation of a GNU_RELRO segment for targets which place the
section in the (read-only) text segment, and therefore cannot have the
section assigned to GNU_RELRO and neither it would make sense.
Currently the list of such targets consists of 64-bit HPPA and
non-VxWorks MIPS targets, as determined by looking for TEXT_DYNAMIC
being set across ld/emulparams/* and then verified by examining default
linker scripts produced in a `--enable-targets=all' build.
ld/
* testsuite/ld-elf/binutils.exp (binutils_test): Make the
expectation for `.dynamic' in GNU_RELRO segment target-specific.
When building an executable, undefined symbols are error and undefined
weak symbols are resolved to zero. We only need to check PIC for
building a shared library.
bfd/
PR ld/21782
* elf64-x86-64.c (elf_x86_64_relocate_section): Limit PIC check
to shared library.
ld/
PR ld/21782
* testsuite/ld-x86-64/pie3-nacl.d: New file.
* testsuite/ld-x86-64/pie3.d: Likewise.
* testsuite/ld-x86-64/pie3.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pie3 and pie3-nacl.
These all were odd in that they used r13 as the GOT pointer. That
didn't matter for the purpose of testing, but would never occur in
practice. Also, the tlsopt5 tests could have their global dynamic
sequences optimized to initial exec, so link with -shared.
* testsuite/ld-powerpc/powerpc.exp: Add -shared to tlsop5 tests.
* testsuite/ld-powerpc/tlsopt5.d: Adjust.
* testsuite/ld-powerpc/tlsopt1_32.s: Use r30 as GOT pointer.
* testsuite/ld-powerpc/tlsopt2_32.s: Likewise.
* testsuite/ld-powerpc/tlsopt3_32.s: Likewise.
* testsuite/ld-powerpc/tlsopt4_32.s: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.s: Rewrite.
* testsuite/ld-powerpc/tlsopt1_32.d: Adjust.
* testsuite/ld-powerpc/tlsopt2_32.d: Adjust.
* testsuite/ld-powerpc/tlsopt3_32.d: Adjust.
* testsuite/ld-powerpc/tlsopt5_32.d: Adjust.
Complement commit d940949881 ("Add a testcase for PR ld/21529") and
use a linker script to prevent an inter-segment gap arranged by the
default linker script associated with some targets such as `rx-elf':
$ ld -e main -o tmpdir/dump-elf tmpdir/pr21529.o
$ readelf -l tmpdir/dump-elf
Elf file type is EXEC (Executable file)
Entry point 0x10000004
There are 2 program headers, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x001000 0x10000000 0x10000000 0x00008 0x00008 R E 0x1000
LOAD 0x001ffc 0xbffffffc 0xbffffffc 0x00004 0x00004 RW 0x1000
Section to Segment mapping:
Segment Sections...
00 .text
01 .stack
$
and converted to padding with the use of the binary BFD for output from
producing unreasonably large files.
ld/
* testsuite/ld-unique/pr21529.ld: New test linker script.
* testsuite/ld-unique/pr21529.d: Use it.
On Fedora 26, "g++ -dumpversion" displays "7", instead of "7.1.1".
Update selective.exp to support single digit GCC version. Also
remove duplicated [4-9] version check.
* testsuite/ld-selective/selective.exp: Support single digit
GCC version.
Fix a commit 861fb55ab5 ("Defer allocation of R_MIPS_REL32 GOT
slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
regression and a more recent:
FAIL: ld-unique/pr21529
new LD test case failure, observed with all the relevant MIPS targets
whenever the linker is invoked with one or more ELF inputs and the
output format set to `binary'.
The culprit is a segmentation fault caused in `mips_before_allocation'
by a null pointer dereference, where an attempt is made to access the
ELF file header's `e_flags' member, for the purpose of determining
whether to produce a PLT and copy relocations, without first checking
that the output BFD is ELF. The `e_flags' member is stored in BFD's
private data pointed to by `tdep', which in the case of the `binary' BFD
is null, causing the segmentation fault. With other non-ELF BFDs such
as SREC `tdep' is not null and consequently no crash may happen and in
that case random data will be interpreted as it was `e_flags'.
Disable the access to `e_flags' then and all the associated checks and
consequently never produce a PLT and copy relocations if output is not a
MIPS ELF BFD, matching `_bfd_mips_elf_merge_private_bfd_data' that does
not process `e_flags' in that case either and therefore does not let us
decide here anyway if all the input objects included in the link are
suitable for use with a PLT and copy relocations.
ld/
* emultempl/mipself.em (mips_before_allocation): Avoid ELF
processing if not MIPS ELF.
* testsuite/ld-mips-elf/binary.d: New test.
* testsuite/ld-mips-elf/binary.ld: New test linker script.
* testsuite/ld-mips-elf/binary.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
Use frag symbols with a non-zero offset directly in `fix_new_exp' calls
made in PIC branch relaxation. There is no need here to make a helper
symbol to hold the result of a `symbol+offset' calculation requested as
only branches to local symbols are relaxed and in this case the LO16
part of the PIC address load sequence will have the offset accounted for
in calculation against the local GOT entry retrieved as the GOT16 high
part. Consequently actual code produed is identical whether a helper
symbol is used or the original `symbol+offset' expression used directly.
Verify that this is indeed the case with GAS and LD tests.
gas/
* config/tc-mips.c (md_convert_frag): Don't make a helper
expression symbol for `fix_new_exp' called with a non-zero
offset.
* testsuite/gas/mips/relax-offset.d: New test.
* testsuite/gas/mips/mips1@relax-offset.d: New test.
* testsuite/gas/mips/r3000@relax-offset.d: New test.
* testsuite/gas/mips/r3900@relax-offset.d: New test.
* testsuite/gas/mips/micromips@relax-offset.d: New test.
* testsuite/gas/mips/relax-offset.l: New stderr output.
* testsuite/gas/mips/relax-offset.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/relax-offset.dd: New test.
* testsuite/ld-mips-elf/relax-offset.gd: New test.
* testsuite/ld-mips-elf/relax-offset-umips.dd: New test.
* testsuite/ld-mips-elf/relax-offset-umips.gd: New test.
* testsuite/ld-mips-elf/relax-offset.ld: New test linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
(prune_warnings): New temporary procedure.
Add GAS tests to verify Imagination interAptiv MR2 instruction assembly,
disassembly and ELF object file flags.
Add LD tests to verify Imagination interAptiv MR2 ELF object file
link-time compatibility and flag merging/propagation. Use the framework
enhancement added with commit 7575e6a752 ("MIPS/LD/testsuite:
mips-elf-flags: Add MIPS ABI Flags handling").
gas/
* testsuite/gas/mips/elf_mach_interaptiv-mr2.d: New test.
* testsuite/gas/mips/save-err.d: New test.
* testsuite/gas/mips/save-sub.d: New test.
* testsuite/gas/mips/interaptiv-mr2@save.d: New test.
* testsuite/gas/mips/mips1@save-sub.d: New test.
* testsuite/gas/mips/mips2@save-sub.d: New test.
* testsuite/gas/mips/mips3@save-sub.d: New test.
* testsuite/gas/mips/mips4@save-sub.d: New test.
* testsuite/gas/mips/mips5@save-sub.d: New test.
* testsuite/gas/mips/mips32@save-sub.d: New test.
* testsuite/gas/mips/mips64@save-sub.d: New test.
* testsuite/gas/mips/mips16@save-sub.d: New test.
* testsuite/gas/mips/mips16e@save-sub.d: New test.
* testsuite/gas/mips/r3000@save-sub.d: New test.
* testsuite/gas/mips/r3900@save-sub.d: New test.
* testsuite/gas/mips/r4000@save-sub.d: New test.
* testsuite/gas/mips/vr5400@save-sub.d: New test.
* testsuite/gas/mips/interaptiv-mr2@save-sub.d: New test.
* testsuite/gas/mips/sb1@save-sub.d: New test.
* testsuite/gas/mips/octeon2@save-sub.d: New test.
* testsuite/gas/mips/octeon3@save-sub.d: New test.
* testsuite/gas/mips/xlr@save-sub.d: New test.
* testsuite/gas/mips/r5900@save-sub.d: New test.
* testsuite/gas/mips/mips16e2-copy.d: New test.
* testsuite/gas/mips/mips16e2-copy-err.d: New test.
* testsuite/gas/mips/save.d: Remove `MIPS16e' from the `name'
option. Adjust for trailing padding change.
* testsuite/gas/mips/mips16e2-copy-err.l: New stderr output.
* testsuite/gas/mips/save-sub.s: New test source.
* testsuite/gas/mips/mips16e2-copy.s: New test source.
* testsuite/gas/mips/mips16e2-copy-err.s: New test source.
* testsuite/gas/mips/save.s: Update description, change trailing
padding and remove trailing white space.
* testsuite/gas/mips/mips.exp: Expand `save' and `save-err'
tests across the regular MIPS interAptiv MR2 architecture. Run
the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Add interAptiv MR2
tests.
