Many x86 instructions have more than one encodings. Assembler picks
the default one, usually the shortest one. Although the ".s", ".d8"
and ".d32" suffixes can be used to swap register operands or specify
displacement size, they aren't very flexible. This patch adds pseudo
prefixes, {xxx}, to control instruction encoding. The available
pseudo prefixes are {disp8}, {disp32}, {load}, {store}, {vex2}, {vex3}
and {evex}. Pseudo prefixes are preferred over the ".s", ".d8" and
".d32" suffixes, which are deprecated.
gas/
* config/tc-i386.c (_i386_insn): Add dir_encoding and
vec_encoding. Remove swap_operand and need_vrex.
(extra_symbol_chars): Add '}'.
(md_begin): Mark '}' with LEX_BEGIN_NAME. Allow '}' in
mnemonic.
(build_vex_prefix): Don't use 2-byte VEX encoding with
{vex3}. Check dir_encoding and load.
(parse_insn): Check pseudo prefixes. Set dir_encoding.
(VEX_check_operands): Likewise.
(match_template): Check dir_encoding and load.
(parse_real_register): Set vec_encoding instead of need_vrex.
(parse_register): Likewise.
* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
{vex2}, {vex3} and {evex}. Remove ".s", ".d8" and ".d32"
* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
* testsuite/gas/i386/pseudos.d: New file.
* testsuite/gas/i386/pseudos.s: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.s: Likewise.
opcodes/
* i386-gen.c (opcode_modifiers): Replace S with Load.
* i386-opc.h (S): Removed.
(Load): New.
(i386_opcode_modifier): Replace s with load.
* i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3}
and {evex}. Replace S with Load.
* i386-tbl.h: Regenerated.
Originally only Pentium integer instructions are allowed for IAMCU.
This patch removes such a restriction. For example, 387 and SSE2
instructions can be enabled by passing "-march=iamcu+sse2+387" to
assembler.
gas/
* config/tc-i386.c (valid_iamcu_cpu_flags): Removed.
(set_cpu_arch): Updated.
(md_parse_option): Likewise.
* testsuite/gas/i386/i386.exp: Run iamcu-4 and iamcu-5. Remove
iamcu-inval-2 and iamcu-inval-3.
* testsuite/gas/i386/iamcu-4.d: New file.
* testsuite/gas/i386/iamcu-4.s: Likewise.
* testsuite/gas/i386/iamcu-5.d: Likewise.
* testsuite/gas/i386/iamcu-5.s: Likewise.
* testsuite/gas/i386/iamcu-inval-2.l: Removed.
* testsuite/gas/i386/iamcu-inval-2.s: Likewise.
* testsuite/gas/i386/iamcu-inval-3.l: Likewise.
* testsuite/gas/i386/iamcu-inval-3.s: Likewise.
opcodes/
* i386-gen.c (cpu_flag_init): Remove CPU_IAMCU_COMPAT_FLAGS.
* i386-init.h: Regenerated.
AMD64 vs CpuIntel64 ISA should be handled similar as AT&T vs Intel
syntax. Since cpu_flags isn't sorted by position, we need to check
the whole cpu_flags array for the maximum position when verifying
CpuMax.
gas/
PR gas/20154
* config/tc-i386.c (cpu_flags_match): Don't set cpuamd64 nor
cpuintel64.
(match_template): Check Intel64/AMD64 ISA.
opcodes/
PR gas/20154
* i386-gen.c (cpu_flags): Remove CpuAMD64 and CpuIntel64.
(opcode_modifiers): Add AMD64 and Intel64.
(main): Properly verify CpuMax.
* i386-opc.h (CpuAMD64): Removed.
(CpuIntel64): Likewise.
(CpuMax): Set to CpuNo64.
(i386_cpu_flags): Remove cpuamd64 and cpuintel64.
(AMD64): New.
(Intel64): Likewise.
(i386_opcode_modifier): Add amd64 and intel64.
(i386-opc.tbl): Replace CpuAMD64/CpuIntel64 with AMD64/Intel64
on call and jmp.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
CpuMax should be CpuIntel64, not CpuNo64. i386-gen.c is updated to
verify that CpuMax is correct. X86 assembler is updated to properly
set cpuamd64 and cpuintel64.
gas/
PR gas/20154
* config/tc-i386.c (intel64): New.
(cpu_flags_match): Set cpuamd64 and cpuintel64.
(md_parse_option): Set intel64 instead of cpuamd64 and
cpuintel64.
opcodes/
PR gas/20154
* i386-gen.c (main): Fail if CpuMax is incorrect.
* i386-opc.h (CpuMax): Set to CpuIntel64.
* i386-tbl.h: Regenerated.
Add all AVX512 bits to CPU_ANY_AVX_FLAGS.
* i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512DQ_FLAGS,
CPU_AVX512BW_FLAGS, CPU_AVX512VL_FLAGS, CPU_AVX512IFMA_FLAGS
and CPU_AVX512VBMI_FLAGS. Add CpuAVX512DQ, CpuAVX512BW,
CpuAVX512VL, CpuAVX512IFMA and CpuAVX512VBMI to
CPU_ANY_AVX_FLAGS.
* i386-init.h: Regenerated.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
