This patch fixes a bogus use of type punning in parse_barrier() which
was causing an assembly failure on big endian LP64 hosts when attempting
to assemble "isb sy" for AArch64.
The type of the entries in aarch64_barrier_opt_hsh is
aarch64_name_value_pair. We were incorrectly casting this to the
locally-defined asm_barrier_opt which has a wider type (on LP64) for the
second member. This happened to work on little-endian hosts but fails on
LP64 big endian.
The fix is to use the correct type in parse_barrier(). This makes the
locally-defined asm_barrier_opt redundant, so remove it.
gas/ChangeLog:
* config/tc-aarch64.c (asm_barrier_opt): Delete.
(parse_barrier): Fix bogus type punning.
* testsuite/gas/aarch64/system.d: Update disassembly.
* testsuite/gas/aarch64/system.s: Add isb sy test.
PR 26692
* config/tc-z80.c (md_begin): Ensure that xpressions are empty
before using them.
(unify_indexed): Likewise.
(z80_start_line_hook): Improve hash sign handling when SDCC
compatibility mode enabled.
(md_parse_exp_not_indexed): Improve indirect addressing
detection.
(md_pseudo_table): Accept hd64 as an alias of z810.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-aarch64.c: Update Cortex-X1 feature flags.
This is feature flags update for Cortex-X1 CPU.
For more information about this processor, see [0].
[0] : https://www.arm.com/products/cortex-x
gas/ChangeLog:
2020-10-05 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/tc-arm.c: Update Cortex-X1 feature flags.
In 64bit, assembler generates a warning for "sysret":
$ echo sysret | as --64 -o x.o -
{standard input}: Assembler messages:
{standard input}:1: Warning: no instruction mnemonic suffix given and no register operands; using default for `sysret'
Always display suffix for %LQ in 64bit to display "sysretl".
gas/
PR binutils/26704
* testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
sysret.
* testsuite/gas/i386/noreg64.d: Likewise.
* testsuite/gas/i386/x86-64-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-opcode.d: Likewise.
opcodes/
PR binutils/26704
* i386-dis.c (putop): Always display suffix for %LQ in 64bit.
The MODRM byte can be checked to display the instruction name only if the
MODRM byte needed. Clear modrm if the MODRM byte isn't needed so that
modrm field checks in putop like, modrm.mod == N with N != 0, can be done
without checking need_modrm.
gas/
PR binutils/26705
* testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
sysretq.
* testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
* testsuite/gas/i386/x86-64-suffix.d: Likewise.
opcodes/
PR binutils/26705
* i386-dis.c (print_insn): Clear modrm if not needed.
(putop): Check need_modrm for modrm.mod != 3. Don't check
need_modrm for modrm.mod == 3.
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
When the address size prefix applies to both the memory and the register
operand, we need to extract the address size prefix from the register
operand if the memory operand has no real registers, like symbol, DISP
or symbol(%rip).
NB: GCC always generates symbol(%rip) for RIP-relative addressing for
both x32 and x86-64.
Move the .code16 tests in movdir.s to movdir-16bit to show the correct
output from objdump.
PR gas/26685
* config/tc-i386.c (process_suffix): Also check the register
operand for the address size prefix if the memory operand has
no real registers.
* testsuite/gas/i386/enqcmd-16bit.d: New file.
* testsuite/gas/i386/enqcmd-16bit.s: Likewise.
* testsuite/gas/i386/movdir-16bit.d: Likewise.
* testsuite/gas/i386/movdir-16bit.s: Likewise.
* testsuite/gas/i386/enqcmd.s: Add tests with symbol and DISP.
* testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/movdir.s: Add tests with symbol and DISP.
Remove the .code16 test.
* testsuite/gas/i386/i386.exp: Run movdir-16bit and enqcmd-16bit.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/enqcmd-intel.d: Likewise.
* testsuite/gas/i386/enqcmd.d: Likewise.
* testsuite/gas/i386/movdir-intel.d: Likewise.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
If the address prefix changes the register operand, we need to check the
register operand when the memory operand is RIP-relative.
PR gas/26685
* config/tc-i386.c (process_suffix): Check the register operand
for the address size prefix if the memory operand is symbol(%rip).
* testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
addressing.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
* doc/c-aarch64.texi: Document support for Neoverse N2.
gas * testsuite/gas/aarch64/ete.d: New test.
* testsuite/gas/aarch64/ete.s: New test.
opcodes * aarch64-opc.c: Add ETE system registers TRCEXTINSELR<0-3> and TRCRSR.
gas * testsuite/gas/aarch64/trbe-invalid.d: New test.
* testsuite/gas/aarch64/trbe-invalid.l: New test.
* testsuite/gas/aarch64/trbe-invalid.s: New test.
* testsuite/gas/aarch64/trbe.d: New test.
* testsuite/gas/aarch64/trbe.s: New test.
opcodes * aarch64-opc.c: Add TRBE system registers TRBIDR_EL1 , TRBBASER_EL1 ,
TRBLIMITR_EL1 , TRBMAR_EL1 , TRBPTR_EL1, TRBSR_EL1 and TRBTRG_EL1.
This simple follow-on patch adds a feature bit (FP16) that was missing
from the initial Neoverse V1 support.
gas/ChangeLog:
* config/tc-arm.c (arm_cpus): Add FP16 to Neoverse V1.
This simple follow-on patch groups the Neoverse cores together and adds
a missing feature bit (F16) to the entry for Neoverse V1.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Group Neoverse cores
together, add missing F16 bit to Neoverse V1.
Emit an error instead of crashing in frag_new, handling this same as the
i386 port.
gas/
PR 26400
* config/tc-riscv.c (append_insn): If in absolute section, emit
error before add_relaxed_insn call.
* testsuite/gas/riscv/absolute-sec.d: New.
* testsuite/gas/riscv/absolute-sec.l: New.
* testsuite/gas/riscv/absolute-sec.s: New.
This patch adds support for Arm's Neoverse V1 CPU to AArch32 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse V1.
* doc/c-arm.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse V1 CPU to AArch64 binutils.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1.
* doc/c-aarch64.texi: Document Neoverse V1 support.
This adds support for Arm's Neoverse N2 CPU to AArch32 binutils. The
Neoverse N2 CPU builds AArch32 at EL0 and therefore needs support in the
AArch32 assembler.
gas/ChangeLog:
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/tc-arm.c (arm_cpus): Add Neoverse N2.
* doc/c-arm.texi: Document -mcpu=neoverse-n2.
Add option parser for disassembler, and refine the codes of
parse register operand and disassemble register operand.
While strengthen the operands legality check of some instructions.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (parse_type_ctrlreg): Use function
csky_get_control_regno to operand.
(csky_get_reg_val): Likewise.
(is_reg_sp_with_bracket): Use function csky_get_reg_val
to parse operand.
(is_reg_sp): Refine.
(is_oimm_within_range): Fix, report error when operand
is not constant.
(parse_type_cpreg): Refine.
(parse_type_cpcreg): Refine.
(get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
(md_assemble): Fix no error reporting somtimes when
operands number are not fit.
(csky_addc64): Refine.
(csky_subc64): Refine.
(csky_or64): Refine.
(v1_work_fpu_fo): Refine.
(v1_work_fpu_read): Refine.
(v1_work_fpu_writed): Refine.
(v1_work_fpu_readd): Refine.
(v2_work_addc): New function, strengthen the operands legality
check of addc.
* gas/testsuite/gas/csky/all.d : Use register number format when
disassemble register name by default.
* gas/testsuite/gas/csky/cskyv2_all.d : Likewise.
* gas/testsuite/gas/csky/trust.d: Likewise.
* gas/testsuite/gas/csky/cskyv2_ck860.d : Fix.
* gas/testsuite/gas/csky/trust.s : Fix.
opcodes/
* csky-dis.c (using_abi): New.
(parse_csky_dis_options): New function.
(get_gr_name): New function.
(get_cr_name): New function.
(csky_output_operand): Use get_gr_name and get_cr_name to
disassemble and add handle of OPRND_TYPE_IMM5b_LS.
(print_insn_csky): Parse disassembler options.
* opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum.
(GENARAL_REG_BANK): Define.
(REG_SUPPORT_ALL): Define.
(REG_SUPPORT_ALL): New.
(ASH): Define.
(REG_SUPPORT_A): Define.
(REG_SUPPORT_B): Define.
(REG_SUPPORT_C): Define.
(REG_SUPPORT_D): Define.
(REG_SUPPORT_E): Define.
(csky_abiv1_general_regs): New.
(csky_abiv1_control_regs): New.
(csky_abiv2_general_regs): New.
(csky_abiv2_control_regs): New.
(get_register_name): New function.
(get_register_number): New function.
(csky_get_general_reg_name): New function.
(csky_get_general_regno): New function.
(csky_get_control_reg_name): New function.
(csky_get_control_regno): New function.
(csky_v2_opcodes): Prefer two oprerans format for bclri and
bseti, strengthen the operands legality check of addc, zext
and sext.
This patch corrects "size" and "bitsize" in R_RISCV_RVC_* reloc howtos
so that elfnn-riscv.c:perform_relocation doesn't access past the end
of a section. I've also corrected "size" in the R_RISCV_CALL* reloc
howtos since these relocs apply to two consecutive instructions. That
caused fallout in the assembler with complaints about "fixup not
contained within frag" due to tc-riscv.c:append_insn finishing off a
frag after the auipc insn making up a "call" macro. Which is a little
rude since the CALL reloc also relocates the following jalr. Fixed by
changing the frag handling a little.
I've also changed R_RISCV_ALIGN and R_RISCV_TPREL_ADD marker reloc
howtos to look like R_RISCV_NONE, and corrected dst_mask for numerous
relocs, not that it matters very much.
bfd/
PR 26569
* elfxx-riscv.c (howto_table): Correct size and bitsize of
R_RISCV_RVC_BRANCH, R_RISCV_RVC_JUMP, and R_RISCV_RVC_LUI.
Correct size for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPREL32,
R_RISCV_CALL, and R_RISCV_CALL_PLT. Make R_RISCV_TPREL_ADD and
R_RISCV_ALIGN like R_RISCV_NONE. Correct dst_mask many relocs.
gas/
* config/tc-riscv.c (append_insn): Don't tie off frags at CALL
relocs.
(riscv_call): Tie them off after the jalr.
(md_apply_fix): Zero fx_size of RELAX fixup.
Add gas and opcodes support for two xBPF-exclusive ALU operations:
SDIV (signed division) and SMOD (signed modulo), and add tests for
them in gas.
cpu/
* bpf.cpu (insn-op-code-alu): Add SDIV and SMOD.
(define-alu-insn-bin, daib): Take ISAs as an argument.
(define-alu-instructions): Update calls to daib pmacro with
ISAs; add sdiv and smod.
gas/
* testsuite/gas/bpf/alu-xbpf.d: New file.
* testsuite/gas/bpf/alu-xbpf.s: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testuiste/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
I removed a few too many parentheses in git commit 7af677524e. This
patch fixes that problem, rewriting the expression so it won't happen
again. The patch also avoids more UB with shifts of signed values.
PR 26610
* config/tc-arm.c (move_or_literal_pool): Correct extraction of
bignum. Use unsigned "v"
(is_double_a_single): Make "v" and "mantissa" unsigned. Formatting.
(double_to_single): Likewise.
* read.c (s_nop): New function. Handles the .nop directive.
(potable): Add entry for "nop".
(s_nops): Code tidy.
* read.h (s_nop): Add prototype.
* config/tc-bpf.h (md_single_noop_insn): Define.
* config/tc-mmix.h (md_single_noop_insn): Define.
* config/tc-or1k.h (md_single_noop_insn): Define.
* config/tc-s12z.c (md_assemble): Preserve the input line pointer,
rather than corrupting it.
* write.c (relax_segment): Update error message regarding
non-absolute values passed to .fill and .nops.
* NEWS: Mention the new directive.
* doc/as.texi: Document the new directive.
* doc/internals.texi: Document the new internal macros used to
implement the new directive.
* testsuite/gas/all/nop.s: New test.
* testsuite/gas/all/nop.d: New test control file.
* testsuite/gas/all/gas.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
control file.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/space1.l: Adjust expected output.
When -g was used to generate DWARF gas would error out when a .debug_line
already exists. But when a .debug_info section already exists it would
simply skip generating one without warning or error. Do the same for
.debug_line. It is only an error when the user explicitly uses .loc
directives and also generates the .debug_line table itself.
The tests are unfortunately arch specific because the line table is only
generated when actual instructions have been emitted. Use i386 because
that is probably the most used architecture. Before this patch the new
dwarf-line-2 testcase would fail, with this patch it succeeds (and doesn't
try to add its own line table).
gas/ChangeLog:
* as.texi (-g): Explicitly mention when .debug_info and .debug_line
are generated for the DWARF format.
(Loc): Add that it is an error to both use a .loc directive and
generate a .debug_line yourself.
* dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable.
(dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE.
(dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting
an error. Only create .debug_line if it is empty (or doesn't exist).
* testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing
an elf target.
* testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
