Exit status 77 is common (including the autotools world) to indicate
"skip this test". Add support for mapping that to "unsupported" as
that's the closest in the dejagnu world.
If the port hasn't been enabled, don't try to run its tests. Making
this dynamic simplifies the test harnesses and avoids duplicating a
bunch of target tuple checks.
Provide a simple example simulator for people porting to new targets
to use as a reference. This one has the advantage of being used by
people and having a fun program available for it.
It doesn't require a special target -- the example simulators can be
built for any existing port.
Now that we have the common automake build with support for build-time
programs working, we can integrate the common tests into the default
`make check` flow.
This is needed to move to automake & its dejagnu-provided logic,
and eventually by the unified sim logic. The $arch is used only
to figure out which `run` program to use when running tests, and
as we move to a single top-level build, we can delete this and
use sim/run directly.
This is a hand-written implementation that should have fairly complete
coverage for the base integer instruction set ("i"), and for the atomic
("a") and integer multiplication+division ("m") extensions. It also
covers 32-bit & 64-bit targets.
The unittest coverage is a bit weak atm, but should get better.
This wasn't supposed to be in here when it was first merged as we
had specifically disabled it for all the tests (and ADI has papers
in place w/the FSF). Clean up this one.
Now that all port tests live under testsuite/sim/*/, and none live
in testsuite/ directly, flatten the structure by moving all of the
dirs under testsuite/sim/ to testsuite/ directly.
We need to stop passing --tool to dejagnu so that it searches all
dirs and not just ones that start with "sim". Since we have no
other dirs in this tree, and no plans to add any, should be fine.
Now that we've moved all ports to dejagnu & testsuite/sim/, the only
thing the testsuite/configure script has been doing is filling in the
sim_arch field in the testsuite/Makefile. We can simply let the top
sim/configure script do that for us now. This simplifies & speeds up
the build a bit by killing an entire configure script.
This is the only target using a dir directly under testsuite/. All
others use sim/<arch>/ instead. Relocate it so all targets look the
same, and so we can leverage the common test harness.
We drop loop.s in the process because it was never referenced and
was just 2 lines of code.
All other test files are moved & have directives added to the top so
that the test harness can invoke them correctly.
No tests were ever added in here in the ~22 years since it was first
created. Seems unlikely any tests will be added at this rate, and
the sim/mips/ testdir already has some (light) coverage for this
target. So punt the tree.
The frv-elf subdir contained five tests:
* cache: A cache test of some sort.
* exit47: A program to test exit status of 47 from sim.
* grloop: Some basic limited loop test program.
* hello: Standard "hello world" output program.
* loop: An infinite loop program.
The loop.s test is never referenced anywhere, and is all of 2 lines.
Anyone who really needs a while(1); test case and re-implement it
themselves locally.
The cache.s code isn't referenced anywhere because it requires some
custom args to the run program, and when this testcase was added, we
didn't have any support for that. We do now, so we can add a header
to enable that. Turns out the code crashes even with those, so turn
around and mark it xfail. Maybe someone someday will care.
That leaves the small exit47, grloop, and hello tests. Now that the
sim test harness supports testing for custom exit status, we can move
them all to sim/frv/ to maintain test coverage.
The remaining differences between frv-elf & sim/frv are:
* frv-elf/ runs for frv-*-elf while sim/frv/ runs for frv*-*-*.
* frv-elf/ runs "*.s" files while sim/frv/ only has .cgs and such.
On closer inspection, these are also meaningless distinctions:
* There is nothing specific to the tests that require an *-elf
target. Normally that would mean newlib+libgloss type stuff,
but there's no such requirement in frv-elf/.
* The ".s" suffix is the standard "this is an assembly file" suffix.
Since FRV is a CGEN target, we can reuse the existing convention of
".ms" to mean "miscellaneous .s" as in "this is an assembly file,
and run/bucket its test results in the miscellaneous category".
So moving frv-elf/{cache,exit47,grloop,hello}.s to sim/frv/*.ms makes
sense and simplifies things quite a bit for the target while also
slightly increasing the coverage for some tuples.
The m32r-elf subdir contained three tests:
* exit47: A program to test exit status of 47 from sim.
* hello: Standard "hello world" output program.
* loop: An infinite loop program.
There's already a sim/m32r/hello.ms test that does exactly the same
thing as m32r-elf/hello.s, so we can delete that.
The loop.s test is never referenced anywhere, and is all of 2 lines.
Anyone who really needs a while(1); test case and re-implement it
themselves locally.
That leaves the single exit47 test. Now that the sim test harness
supports testing for custom exit status, we can easily move that to
sim/m32r/exit47.ms to maintain test coverage.
The remaining differences between m32r-elf & sim/m32r are:
* m32r-elf/ runs for m32r-*-elf while sim/m32r/ runs for m32r*-*-*.
* m32r-elf/ runs "*.s" files while sim/m32r/ runs "*.ms" files.
On closer inspection, these are also meaningless distinctions:
* There is nothing specific to the tests that require an *-elf
target. Normally that would mean newlib+libgloss type stuff,
but there's no such requirement in m32r-elf/.
* The ".s" suffix is the standard "this is an assembly file"
suffix. Turns out ".ms" is just how sim/m32r/ (and a few other
CGEN based targets) categorize/bucket test cases. It simply
means "miscellaneous .s" as in "this is an assembly file, and
run/bucket its test results in the miscellaneous category".
So moving m32r-elf/exit47.s to sim/m32r/exit47.ms makes sense and
simplifies things quite a bit for the target while also slightly
increasing the coverage for some tuples.
Some tests want to verify they can control the exit status, and
allowing any non-zero value would allow tests to silently fail:
if it crashed & exited 1, or forced all non-zero to 1, then we
wouldn't be able to differentiate with a test exiting with a
status like 47.
Extend the test harness to allow tests to declare their expected
exit status that would be defined as a "pass". This requires a
small tweak to the sim_run API to return the status directly, but
that shouldn't be a big deal as it's only used by sim code.
These were written with 32-bit host assumptions baked into it.
Simplify the printf formats to use ll length modifier as it's
in C11 rather than trying to manually break it up into two,
and cleanup some of the casts to stop assuming sizeof(long) is
the same as sizeof(int).
We also have to add a few more includes for the various funcs
used in here.
The tests aren't compiled automatically still. We can figure
that out later with more work.
We don't want arch-specific entries in the common ChangeLog files.
Most arches do this already, so clean up the recent additions, and
move some older entries down to help avoid confusing newcomers.
PR ld/13900
Linking this test crashes the linker, so disable it. The crash
was reported about 9 years ago but haven't made progress, so lets
avoid the failures in test runs.
Building the C tests with a cris-elf toolchain (gcc-10.2 &
newlib-4.1.0) currently fail due to warnings it emits:
cris-elf-ld: libc.a(lib_a-closer.o): in function `_close_r':
newlib/libc/reent/closer.c:47: warning: _close is not implemented and will always fail
This is because the default target for cris-elf is bare metal, not
the simulator. For that, we need -sim. So add it for elf targets.
We don't add it for all targets as the simulator (and testsuite)
run both libgloss programs as well as Linux userspace programs.
Make sure we include unistd.h for getpid prototypes to fix build
warnings/errors with newer compilers & C libraries.
Doing that for close in openpf highlights these were using the
wrong function -- need to use fclose on FILE*, not close.
These tests pass again with a cris-elf toolchain.
Looking through the history, it doesn't seem like the fr30 port was
ever merged. There used to be a testsuite/fr30-elf/ dir, but that
was punted back in 2005 as being dead too. Since there's no refs
and the dir hasn't been touched since 1999, lets assume no one will
ever notice or care.
These tests all fail to assemble when targeting the h8300 or h8300h
cpu variants with errors like:
rotl.s:242: Warning: Opcode `rotl.b' with these operand types not available in H8/300H mode
rotl.s:242: Error: invalid operands
It's been this way for years and no one seems to care, so disable
them for those targets since the assembler thinks it's impossible.
We don't need to manually enumerate every test. Use a glob function
like every other port and rely on the (already existing) #mach headers
in each file to filter out targets we don't care about.
Make sure the files using abs() include stdlib.h for its prototype.
These files were relying on it being included implicitly by others
which isn't guaranteed, and newer toolchains produce warnings.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Binutils support for LMBD instruction was merged [1]. So add it also
to simulator.
LMBD instruction does left-most-bit-detection. It returns 32 if
the given bit value is not found in the provided word value.
[1] https://sourceware.org/pipermail/binutils/2020-October/113901.html
sim/pru/ChangeLog:
* pru.h (RS1SEL): New macro.
(RS1_WIDTH): New macro.
* pru.isa: Describe the LMBD instruction.
sim/testsuite/sim/pru/ChangeLog:
* lmbd.s: New test.
Run autoreconf in sim/ directory and you'll see some errors. The
problem is that autoreconf (a perl script) does not evaluate the value
passed as an argument to AC_CONFIG_AUX_DIR, so something like:
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
does not do the right thing inside autoreconf, my understanding is
that changing to something like this is fine:
AC_CONFIG_AUX_DIR(../..)
the generated configure seems to check the value passed, and the value
passed relative to the source directory, so I think we get basically
the same behaviour as before.
sim/testsuite/ChangeLog:
* configure: Regnerate.
* configure.ac (AC_CONFIG_AUX_DIR): Update.
sim/testsuite/d10v-elf/ChangeLog:
* configure: Regnerate.
* configure.ac (AC_CONFIG_AUX_DIR): Update.
sim/testsuite/frv-elf/ChangeLog:
* configure: Regnerate.
* configure.ac (AC_CONFIG_AUX_DIR): Update.
sim/testsuite/m32r-elf/ChangeLog:
* configure: Regnerate.
* configure.ac (AC_CONFIG_AUX_DIR): Update.
sim/testsuite/mips64el-elf/ChangeLog:
* configure: Regnerate.
* configure.ac (AC_CONFIG_AUX_DIR): Update.
The div and mod eBPF instructions are unsigned, but the semantic
specification for the simulator incorrectly used signed operators.
Correct them to unsigned versions, and correct the ALU tests in
the simulator (which incorrectly assumed signed semantics).
Tested in bpf-unknown-none.
cpu/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* bpf.cpu (define-alu-instructions): Correct semantic operators
for div, mod to unsigned versions.
sim/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* bpf/sem-be.c: Regenerate.
* bpf/sem-le.c: Likewise.
sim/testsuite/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* sim/bpf/alu.s: Correct div and mod tests.
* sim/bpf/alu32.s: Likewise.
Operand sizes used for simulation of MSP430 hardware multiply
operations are not aligned with the sizes used on the target, resulting
in the simulator storing signed operands with too much precision.
Additionally, simulation of unsigned multiplication is missing explicit
casts to prevent any implicit sign extension.
gcc.c-torture/execute/pr91450-1.c uses unsigned widening multiplication
of 32-bit operands -4 and 2, to produce a 64-bit result:
0xffff fffc * 0x2 = 0x1 ffff fff8
If -4 is stored in 64-bit precision, then the multiplication is
essentially signed and the result is -8 in 64-bit precision
(0xffff ffff ffff fffc), which is not correct.
sim/msp430/ChangeLog:
* msp430-sim.c (put_op): For unsigned multiplication, explicitly cast
operands to the unsigned type before multiplying.
* msp430-sim.h (struct msp430_cpu_state): Fix types used to store hwmult
operands.
sim/testsuite/sim/msp430/ChangeLog:
* mpyull_hwmult.s: New test.
I ran
for i in $(find . -name configure.ac); do pushd $(dirname $i); autoreconf -vf; popd; done
to re-generate all automake/autoconf files throughout the repo (with
upstream autoconf 2.69 and automake 1.15.1). These were the changes
that came out. I am pushing this as obvious.
libdecnumber/ChangeLog:
* aclocal.m4, configure: Re-generate.
sim/bfin/ChangeLog:
* aclocal.m4, configure: Re-generate.
sim/erc32/ChangeLog:
* configure: Re-generate.
sim/mips/ChangeLog:
* configure: Re-generate.
sim/testsuite/ChangeLog:
* configure: Re-generate.
Change-Id: I97335c09972d25cc5f6fd8da4db4ffe4a0348787
The MSP430X RRUX instruction (unsigned right shift) is synthesized as
the RRC (rotate right through carry) instruction, but with the ZC
(zero carry) bit of the opcode extention word set.
Ensure the carry flag is ignored when the ZC bit is set.
sim/msp430/ChangeLog:
2020-01-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* msp430-sim.c (msp430_step_once): Ignore the carry flag when executing
an RRC instruction, if the ZC bit of the extension word is set.
sim/testsuite/sim/msp430/ChangeLog:
2020-01-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* rrux.s: New test.
PR build/24572 notes that "make install-strip" fails. For me, it
works in every directory except "sim", so this patch adds
install-strip targets to the Makefiles that appear there.
sim/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/common/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/igen/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/ppc/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
sim/testsuite/ChangeLog
2019-12-19 Tom Tromey <tromey@adacore.com>
PR build/24572:
* Makefile.in (install-strip): New target.
Change-Id: I76613bc5c7e7812284f33826f8a5d914477fcdc5
sim/testsuite/ChangeLog:
* configure: Regenerate.
sim/testsuite/sim/pru/ChangeLog:
* add.s: New test.
* allinsn.exp: New file.
* dmem-zero-pass.s: New test.
* dmem-zero-trap.s: New test.
* dram.s: New test.
* jmp.s: New test.
* loop-imm.s: New test.
* loop-reg.s: New test.
* mul.s: New test.
* subreg.s: New test.
* testutils.inc: New file.
This is a simple test to ensure that the l.adrp instruction can be assembled and
simulated correctly.
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* adrp.S: New file.
This is a very basic test but it ensure the machine is wired up
correctly and that the assembler works.
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* fpu64a32.S: New file.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Also fix the incorrect definitions of multiply and divide carry and
overflow float.
Changes to the instructions are made in the .cpu file, then we
regenerate the binutils and sim files.
The changes also required a few fixups for tests and additional sim helpers.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU.
(insn-opcode-alu-regreg): Add opcodes for MULD and MULDU.
(l-mul): Fix overflow support and indentation.
(l-mulu): Fix overflow support and indentation.
(l-muld, l-muldu, l-msbu, l-macu): New instructions.
(l-div); Remove incorrect carry behavior.
(l-divu): Fix carry and overflow behavior.
(l-mac): Add overflow support.
(l-msb, l-msbu): Add carry and overflow support.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
sim/common/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* cgen-ops.h (ADDCFDI): New function, add carry flag DI variant.
(ADDOFDI): New function, add overflow flag DI variant.
(SUBCFDI): New function, subtract carry flag DI variant.
(SUBOFDI): New function, subtract overflow flag DI variant.
sim/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* or1k/cpu.h: Regenerate.
* or1k/decode.c: Regenerate.
* or1k/decode.h: Regenerate.
* or1k/model.c: Regenerate.
* or1k/sem-switch.c: Regenerate.
* or1k/sem.c: Regenerate:
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* div.S: Fix tests to match correct overflow/carry semantics.
* mul.S: Likewise.
gas/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* testsuite/gas/or1k/allinsn.s: Add instruction tests for
l.muld, l.muldu, l.macu, l.msb, l.msbu.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
This is the testsuite for the or1k sim, it tests running many of the
basic architecture instructions on the openrisc sim.
sim/testsuite/sim/or1k/ChangeLog:
2017-12-12 Peter Gavin <pgavin@gmail.com>
Stafford Horne <shorne@gmail.com>
* add.S: New file.
* alltests.exp: New file.
* and.S: New file.
* basic.S: New file.
* div.S: New file.
* ext.S: New file.
* find.S: New file.
* flag.S: New file.
* fpu.S: New file.
* jump.S: New file.
* load.S: New file.
* mac.S: New file.
* mfspr.S: New file.
* mul.S: New file.
* or.S: New file.
* or1k-asm-test-env.h: New file.
* or1k-asm-test-helpers.h: New file.
* or1k-asm-test.h: New file.
* or1k-asm.h: New file.
* or1k-test.ld: New file.
* ror.S: New file.
* shift.S: New file.
* spr-defs.h: New file.
* sub.S: New file.
* xor.S: New file.
sim/testsuite/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
