Since the linker created .TOC. symbol is placed at roughly .got+32k,
.toc input sections must be placed in or after .got if .toc entries
are accessed using 16-bit signed offset relocs. crt1.o contains such
a relocation.
PR gold/20717
* testsuite/pr20717.t: Add .got output section containing .toc.
2016-12-01 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* script-sections.cc (Script_sections): Set *keep to false when
no match.
2016-12-11 Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* testsuite/Makefile.am (pr20717): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20717.c: New test source file.
* testsuite/pr20717.sh: New test script.
* testsuite/pr20717.t: New test linker script.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
A branch in a non-exec section that needs a stub can lead to this
assertion.
* powerpc.cc (Powerpc_relobj::stub_table): Return NULL rather
then asserting.
Adds a new option, defaulting to off, that allows a group of stubs to
serve multiple output sections. Prior to this patch powerpc gold
allowed this unconditionally, which is a little unsafe with clever
code that discards/reuses sections at runtime.
* options.h (--stub-group-multi): New PowerPC option.
* powerpc.cc (Stub_control): Add multi_os_ var and param
to constructor. Sort start_ var later. Comment State.
(Stub_control::can_add_to_stub_group): Heed multi_os_.
(Target_powerpc::group_sections): Update.
Gold attaches stubs to an existing section in contrast to ld.bfd which
inserts a new section for stubs. If we want stubs before branches,
then the stubs must be added to the previous section. Adding to the
previous section is a disaster if there is a large gap between the
previous section and the group.
PR gold/20878
* powerpc.cc (Stub_control): Replace stubs_always_before_branch_
with stubs_always_after_branch_, group_end_addr_ with
group_start_addr_.
(Stub_control::can_add_to_stub_group): Rewrite to suit scanning
sections by increasing address.
(Target_powerpc::group_sections): Scan that way. Delete corner
case.
* options.h (--stub-group-size): Update help string.
Some more debug output, and a little hardening.
* powerpc.cc (Stub_table_owner): Provide constructor.
(Powerpc_relobj::set_stub_table): Resize fill with -1.
(Target_powerpc::Branch_info::make_stub): Provide target debug
output on returning false.
If the default starting address is less than the new ABI page size,
we end up misaligning the file header, causing an internal error.
gold/
PR gold/20834
* target.h (Target::default_text_segment_address): Bump default
start address up to ABI page size.
gold/
PR gold/18989
* options.cc (General_options::object_format_to_string): New function.
(General_options::copy_from_posdep_options): New function.
(General_options::parse_push_state): New function.
(General_options::parse_pop_state): New function.
* options.h (--push-state, --pop-state): New options.
(General_options::object_format_to_string): New method.
(General_options::set_incremental_disposition): New method.
(General_options::copy_from_posdep_options): New method.
(General_options::options_stack_): New data member.
gold/
PR gold/20346
* options.cc (One_option::print): Print "(default)" when appropriate.
* options.h: Clean up and re-sort options.
(One_option::is_default): New data member.
(One_option::One_option): Add is_default parameter; adjust all calls.
(DEFINE_var): Add is_default__ parameter; adjust all calls.
(DEFINE_bool): Set is_default based on default_value__.
(DEFINE_bool_ignore): New macro.
(--no-eh-frame-hdr): New option.
(--enable-new-dtags): Remove mention of DT_FLAGS.
2016-11-21 Igor Kudrin <ikudrin@accesssoftek.com>
gold/
* layout.cc: Include windows.h and rpcdce.h (for MinGW32).
(Layout::create_build_id): Generate uuid using UuidCreate().
This fix keeps the section with the highest alignment when folding sections with ICF.
PR gold/17704
* icf.cc (match_sections): Add new parameter section_addraligns.
Check section alignment and keep the section with the strictest
alignment.
(find_identical_sections): New local variable section_addraligns.
Store each section's alignment.
* testsuite/pr17704a_test.s: New file.
* testsuite/Makefile.am (pr17704a_test): New test.
* testsuite/Makefile.in: Regenerate.
When we see an unversioned symbol reference in a shared library, followed
by a default definition of the symbol in another shared library, we were
treating them as separate symbols. That should only happen when both are
definitions.
gold/
PR gold/20238
* symtab.cc (Symbol_table::define_default_version): Check that
unversioned symbol is defined.
This patch adds a little more debug output, and replaces two variables
with one, tracking current max group size by group_size_ rather than
by has14_.
* powerpc.cc (class Stub_control): Delete stub14_group_size_
and has14_. Add group_size_.
(Stub_control::can_add_to_stub_group): Adjust to suit. Print
debug info when switching to adding sections before stubs.
This patch rewrites the rather obscure can_add_to_stub_group, fixing
a problem with the handling of sections containing conditional
external branches. When a section group contains any such section,
the group size needs to be limited to a much smaller size than groups
with only non-conditional external branches.
PR 20523
* powerpc.cc (class Stub_control): Add has14_. Comment owner_.
(Stub_control::can_add_to_stub_group): Correct grouping of
sections containing 14-bit external branches. When returning
false, set state_ to reflect the fact that we have one section
for the next group. Rewrite most of function for clarity.
Add and expand comments.
(Target_powerpc::do_relax): Print stub group size retry in hex.
gold/ChangeLog
2016-08-26 Han Shen <shenhan@google.com>
* powerpc.cc (Stub_table::min_size_threshold_): New member to
limit size.
(Stub_table::set_min_size_threshold): New member function.
(Stub_table::set_address_and_size): Add code to only allow size
increase.
(Target_powerpc::do_relax): Add code to record last size.
Build the test objects with the in-tree assembler. Also fix some cascading
error messages caused by not resetting the skip_call_tls_get_addr_ flag
after printing the error.
gold/
* i386.cc (Target_i386): Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216a): Add missing dependencies.
(pr20308a): Add -Bgcctestdir/ to compile rules.
* testsuite/Makefile.in: Regenerate.
With some versions of gas, the call to tls_get_addr uses a GOTPCREL
relocation instead of a GOTPCRELX relocation. We should allow for that
when skip_call_tls_get_addr_ is true. We should also build the test
objects with the in-tree assembler.
This patch also fixes some cascading error messages caused by not
resetting the skip_call_tls_get_addr_ flag after printing the error.
gold/
PR gold/20216
* x86_64.cc (Target_x86_64::Relocate::relocate): Add check for
R_X86_64_GOTPCREL. Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216_gd.o): Add -Bgcctestdir/.
(pr20216_ld.o): Likewise.
* testsuite/Makefile.in: Regenerate.
2016-08-10 James Clarke <jrtc27@jrtc27.com>
gold/
PR gold/20443
* symtab.cc (Symbol_table::add_from_relobj): Handle NULL symbols,
which will be present for STT_SPARC_REGISTER.
(Symbol_table::add_from_pluginobj): Likewise.
(Symbol_table::add_from_dynobj): Likewise.
(Symbol_table::add_from_incrobj): Removed dead code.
The fall-through in Target_sparc::Relocate::relocate for
R_SPARC_GOTDATA_OP_LOX10 is currently R_SPARC_GOT13, but should
clearly be R_SPARC_GOT10. GCC has been seen to emit a sethi/xor
rather than a sethi/or sequence to load a 32-bit immediate, but
if R_SPARC_GOT13 is used then bits 10-12 get zeroed out as both
the sethi and xor immediates contain them.
gold/
PR gold/20442
* sparc.cc (Target_sparc::Relocate::relocate): R_SPARC_GOTDATA_OP_LOX10
should fall back on R_SPARC_GOT10, not R_SPARC_GOT13.
This CL implemented the following relocs for AArch64 target.
- R_AARCH64_MOVW_UABS_G*
- R_AARCH64_MOVW_SABS_G* relocations
gold/ChangeLog
2016-07-26 Igor Kudrin <ikudrin@accesssoftek.com>
* aarch64-reloc-property.cc (Rvalue_bit_select_impl): New class.
(rvalue_bit_select): Use Rvalue_bit_select_impl.
* aarch64-reloc.def (MOVW_UABS_G0, MOVW_UABS_G0_NC,
MOVW_UABS_G1,
MOVW_UABS_G1_NC, MOVW_UABS_G2, MOVW_UABS_G2_NC, MOVW_UABS_G3,
MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2): New relocations.
* aarch64.cc (Target_aarch64::Scan::local): Add cases for new
MOVW_UABS_* and MOVW_SABS_* relocations.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Add cases and handlings
for new MOVW_UABS_* and MOVW_SABS_* relocations.
* testsuite/Makefile.am (aarch64_relocs): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_globals.s: New test source file.
* testsuite/aarch64_relocs.s: Likewise.
* testsuite/aarch64_relocs.sh: New test script.
With GCC 6 when not using -static-libstdc++, the operator delete(void*)
function is defined in the shared C++ support library, rather than in
the main program. The test script is too aggressive in checking for
this symbol's presence among the exported symbols. This patch removes
the check for that symbol.
gold/
PR gold/20310
* testsuite/dynamic_list.sh: Remove check for _ZdlPv.
There are extensions to 386 psABI:
https://groups.google.com/forum/#!topic/ia32-abi/awsRSvJOJfs
to call tls_get_addr via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call
instruction is replaced by 6-byte one to make room for indirect call.
For local dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition,
we generate a 6-byte lea instruction as nop, instead of a 1-byte nop
plus a 4-byte lea instruction.
PR gold/20308
* i386.cc (Target_i386::Relocate::relocate): Allow
R_386_GOT32X relocation against ___tls_get_addr.
(Target_i386::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_i386::Relocate::tls_gd_to_le): Likewise.
(Target_i386::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20308a_test,
pr20308b_test, pr20308c_test, pr20308d_test, pr20308e_test.
(pr20308a_test_SOURCES): New.
(pr20308a_test_DEPENDENCIES): Likewise.
(pr20308a_test_CFLAGS): Likewise.
(pr20308a_test_LDFLAGS): Likewise.
(pr20308a_test_LDADD): Likewise.
(pr20308b_test_SOURCES): Likewise.
(pr20308b_test_DEPENDENCIES): Likewise.
(pr20308b_test_CFLAGS): Likewise.
(pr20308b_test_LDFLAGS): Likewise.
(pr20308b_test_LDADD): Likewise.
(pr20308c_test_SOURCES): Likewise.
(pr20308c_test_DEPENDENCIES): Likewise.
(pr20308c_test_CFLAGS): Likewise.
(pr20308c_test_LDFLAGS): Likewise.
(pr20308c_test_LDADD): Likewise.
(pr20308d_test_SOURCES): Likewise.
(pr20308d_test_DEPENDENCIES): Likewise.
(pr20308d_test_CFLAGS): Likewise.
(pr20308d_test_LDFLAGS): Likewise.
(pr20308d_test_LDADD): Likewise.
(pr20308e_test_SOURCES): Likewise.
(pr20308e_test_DEPENDENCIES): Likewise.
(pr20308e_test_CFLAGS): Likewise.
(pr20308e_test_LDFLAGS): Likewise.
(pr20308e_test_LDADD): Likewise.
(pr20308a.so): Likewise.
(pr20308b.so): Likewise.
(pr20308_gd.o): Likewise.
(pr20308_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20308a.so pr20308b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20308_def.c: New file.
* testsuite/pr20308_gd.S: Likewise.
* testsuite/pr20308_ld.S: Likewise.
* testsuite/pr20308_main.c: Likewise.
There are extensions to x86-64 psABI:
https://groups.google.com/forum/#!topic/x86-64-abi/de5_KnLHxtI
to call tls_get_addr via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition, we
generate 4 0x66 prefixes, instead of 3, before mov instruction in 64-bit
and generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit.
PR gold/20216
* configure.ac (DEFAULT_TARGET_X86_64_OR_X32): New
AM_CONDITIONAL.
* configure: Regenerated.
* x86_64.cc (Target_x86_64<size>::Relocate::relocate): Allow
R_X86_64_GOTPCRELX relocation against __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_le): Likewise.
(Target_x86_64<size>::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20216a_test,
pr20216b_test, pr20216c_test, pr20216d_test, pr20216e_test.
(pr20216a_test_SOURCES): New.
(pr20216a_test_DEPENDENCIES): Likewise.
(pr20216a_test_CFLAGS): Likewise.
(pr20216a_test_LDFLAGS): Likewise.
(pr20216a_test_LDADD): Likewise.
(pr20216b_test_SOURCES): Likewise.
(pr20216b_test_DEPENDENCIES): Likewise.
(pr20216b_test_CFLAGS): Likewise.
(pr20216b_test_LDFLAGS): Likewise.
(pr20216b_test_LDADD): Likewise.
(pr20216c_test_SOURCES): Likewise.
(pr20216c_test_DEPENDENCIES): Likewise.
(pr20216c_test_CFLAGS): Likewise.
(pr20216c_test_LDFLAGS): Likewise.
(pr20216c_test_LDADD): Likewise.
(pr20216d_test_SOURCES): Likewise.
(pr20216d_test_DEPENDENCIES): Likewise.
(pr20216d_test_CFLAGS): Likewise.
(pr20216d_test_LDFLAGS): Likewise.
(pr20216d_test_LDADD): Likewise.
(pr20216e_test_SOURCES): Likewise.
(pr20216e_test_DEPENDENCIES): Likewise.
(pr20216e_test_CFLAGS): Likewise.
(pr20216e_test_LDFLAGS): Likewise.
(pr20216e_test_LDADD): Likewise.
(pr20216a.so): Likewise.
(pr20216b.so): Likewise.
(pr20216_gd.o): Likewise.
(pr20216_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20216a.so pr20216b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20216_def.c: New file.
* testsuite/pr20216_gd.S: Likewise.
* testsuite/pr20216_ld.S: Likewise.
* testsuite/pr20216_main.c: Likewise.
PowerPC gcc aligns char arrays to a word which results in the test
failing since it expects a char alignment. As the test already uses
gcc attributes to assign variables to sections, we may as well use an
attribute to align too.
* testsuite/plugin_layout_with_alignment.c: Explicitly align all
variables.
A target like powerpc64 that is PIC by default doesn't need copy relocs.
* testsuite/Makefile.am (copy_test_protected): Disable for powerpc.
* testsuite/Makefile.in: Regenerate.
According to "ELF for the ARM(r) 64-bit Architecture (AArch64)",
this relocation can be used "to prevent removal of sections that
might otherwise appear to be unused."
gold/
* aarch64-reloc.def (NONE): New relocation.
* aarch64.cc (Target_aarch64::Scan::local): Handle R_AARCH64_NONE.
(Target_aarch64::Scan::global): Likewise.
* testsuite/Makefile.am (aarch64_reloc_none): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_reloc_none.s: New test source file.
* testsuite/aarch64_reloc_none.sh: New test script.
Please see patch discussion:
https://www.sourceware.org/ml/binutils/2016-05/msg00322.html
2016-06-28 Sriraman Tallam <tmsriram@google.com>
* x86_64.cc (Lazy_view): New class.
(can_convert_mov_to_lea): Templatize function. Make the function
check for appropriate relocation types and use the view parameter
to get section contents.
(can_convert_callq_to_direct): New function.
(Target_x86_64<size>::Scan::global): Refactor.
(Target_x86_64<size>::Relocate::relocate): Refactor. Change any indirect
call via GOT that can be converted.
* testsuite/Makefile.am (x86_64_indirect_call_to_direct.sh): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/x86_64_indirect_call_to_direct1.s: New file.
* testsuite/x86_64_indirect_jump_to_direct1.s: New file.
bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.
ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.
The fix for PR 15370 did not correctly check all patterns in a group,
but instead threw all unassigned sections into the group. This patch
fixes that.
2016-06-23 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
gold/
PR gold/15370
* script-sections.cc
(Output_section_element_input::set_section_addresses): Keep bin_count
separate from input_pattern_count.
* testsuite/script_test_12.t: Add another section .x4.
* testsuite/script_test_12i.t: Likewise.
* testsuite/script_test_12a.c: Likewise.
* testsuite/script_test_12b.c: Likewise.
Add a configure option --enable-relro to decide whether -z relro should
be enabled by default. Default to yes.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro and default
to 1.
* config.in: Regenerated.
* configure: Likewise.
* options.h (General_options::relro): Default to
DEFAULT_LD_Z_RELRO.
If there is no PLT in output, return 0 for first_plt_entry_offset and
plt_entry_size.
PR gold/20245
* i386.cc (Target_i386::first_plt_entry_offset): Return 0 if
plt_ is NULL.
(Target_i386::plt_entry_size): Likewise.
(Target_x86_64<size>::first_plt_entry_offset): Likewise.
(Target_x86_64<size>::plt_entry_size): Likewise.
Includes DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags and
__RLD_MAP symbol.
2016-06-20 Vladimir Radosavljevic <Vladimir.Radosavljevic@imgtec.com>
elfcpp/
* elfcpp.h (DT_MIPS_RLD_MAP_REL): New enum constant.
gold/
* mips.cc (Target_mips::Target_mips): Initialize rld_map_.
(Target_mips::rld_map_): New data member.
(Target_mips::do_finalize_sections): Add support for
DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags,
.rld_map section, and __RLD_MAP symbol.
(Target_mips::do_dynamic_tag_custom_value): Add support for
DT_MIPS_RLD_MAP_REL dynamic tag.
* output.cc (Output_data_dynamic::get_entry_offset): New method
definition.
* output.h (Output_data_dynamic::get_entry_offset): New method
declaration.
elfcpp/
* mips.h (R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16, R_MIPS_PCLO16): New enums for
Mips32r6 and Mips64r6 relocations.
(r6_isa): New function.
gold/
* mips.cc (relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(hi16_reloc): Add support for R_MIPS_PCHI16 relocation.
(is_matching_lo16_reloc): Likewise.
(lo16_reloc): Add support for R_MIPS_PCLO16 relocation.
(Mips_output_data_plt::plt_entry_r6): New static data member for
R6 PLT entry.
(Target_mips::is_output_r6): New method.
(Target_mips::Mips_mach): Add new enum constants.
(Mips_relocate_functions::Status): Likewise.
(Mips_relocate_functions::pchi16_relocs): New static data member.
(Mips_relocate_functions::relpc21): New method.
(Mips_relocate_functions::relpc26): Likewise.
(Mips_relocate_functions::relpc18): Likewise.
(Mips_relocate_functions::relpc19): Likewise.
(Mips_relocate_functions::relpchi16): Likewise.
(Mips_relocate_functions::do_relpchi16): Likewise.
(Mips_relocate_functions::relpclo16): Likewise.
(Mips_output_data_plt::do_write): Add support for Mips r6 plt
entry.
(Target_mips::mips_32bit_flags): Add E_MIPS_ARCH_32R6 support.
(Target_mips::elf_mips_mach): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
(Target_mips::update_abiflags_isa): Likewise.
(mips_get_size_for_reloc): Add support for relocs: R_MIPS_PCHI16,
R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3 and
R_MIPS_PC19_S2.
(Target_mips::Scan::local): Add support for relocs: R_MIPS_PCHI16
and R_MIPS_PCLO16.
(Target_mips::Scan::global): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(Target_mips::Relocate::relocate): Call functions for resolving
Mips32r6 and Mips64r6 relocations, and print error message for
STATUS_PCREL_UNALIGNED.
(Target_mips::Scan::get_reference_flags): Add support for relocs:
R_MIPS_PCHI16, R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2,
R_MIPS_PC18_S3 and R_MIPS_PC19_S2.
(Target_mips::elf_mips_mach_name): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
The .got.plt section must be placed right after the .got section.
Otherwise, GOT offset will be wrong.
PR gold/20246
* testsuite/script_test_2.t: Add .got.plt after .got.
gold/
* mips.cc (Mips_relobj::Mips_relobj): Initialize
has_reginfo_section_.
(Mips_relobj::has_reginfo_section_): New data member.
(Mips_relobj::has_reginfo_section): New method.
(class Mips_output_section_reginfo): Change base class to
Output_section_data, and set masks of the output .reginfo section
in constructor.
(Mips_output_section_reginfo::as_mips_output_section_reginfo):
Remove.
(Mips_output_section_reginfo::set_masks): Likewise.
(Mips_output_section_reginfo::set_final_data_size): Likewise.
(Mips_output_section_reginfo::do_print_to_mapfile): New method.
(Target_mips::do_make_output_section): Remove.
(Mips_relobj::do_read_symbols): Set has_reginfo_section_ to true
if the object contains a .reginfo section.
(Target_mips::do_finalize_sections): Create a .reginfo output
section if needed.
* mips.cc (Mips_got_entry::Mips_got_entry): Remove object argument
for global got symbols, and set addend to 0.
(Mips_got_entry::hash): Change hash algorithm.
(Mips_got_entry::equals): Refactor.
(Mips_got_entry::object): Return input object for local got symbols
from union d.
(Mips_got_entry::addend): Change return of the relocation addend.
(Mips_got_entry::addend_): Move from union d.
(Mips_got_entry::object_): Move into union d.
(class Mips_symbol_hash): New class.
(Mips_got_info::Global_got_entry_set): New type.
(Mips_got_info::global_got_symbols): Change return type to
Global_got_entry_set.
(Mips_got_info::global_got_symbols_): Change type to
Global_got_entry_set.
(Mips_symbol::hash): New method.
(Mips_output_data_la25_stub::symbols_): Change type to std::vector.
(Mips_output_data_mips_stubs::Mips_stubs_entry_set): New type.
(Mips_output_data_mips_stubs::symbols_): Change type to
Mips_stubs_entry_set.
(Mips_got_info::record_global_got_symbol): Don't pass object
argument when creating global got symbol.
(Mips_got_info::record_got_entry): Remove find before inserting
got entries.
(Mips_got_info::add_reloc_only_entries): Change type of iterator
to Global_got_entry_set.
(Mips_got_info::count_got_symbols): Likewise.
(Mips_output_data_la25_stub::create_la25_stub): Use push_back
for adding entries to symbols_.
(Mips_output_data_la25_stub::do_write): Change type of iterator
to std::vector.
(Mips_output_data_mips_stubs::set_lazy_stub_offsets): Change type
of iterator to Mips_stubs_entry_set.
(Mips_output_data_mips_stubs::set_needs_dynsym_value): Likewise.
(Mips_output_data_mips_stubs::do_write): Likewise.
In PR 16979, a reference to malloc is being resolved to an unversioned
reference in libmalloc.so. When linked with --as-needed, however, the
dynamic table does not list libmalloc.so as a DT_NEEDED library.
If we have a reference to an unversioned symbol in a shared object,
and we later see a versioned definition in another shared object, we
were overriding the first definition with the second in the process of
defining the default version. As a result, we no longer think that the
first shared object was actually needed to resolve any symbols, and we
don't list it as a DT_NEEDED library.
This patch fixes the problem by treating the two definitions as separate
symbols, so the second definition does not override the first.
2016-03-30 Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/16979
* symtab.cc (Symbol_table::define_default_version): Check for case
where symbols are both in different shared objects.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
During LTO, if (1) an IR file contains a COMDAT group that is kept,
(2) a later non-claimed file contains the same group, which we discard,
and (3) the plugin fails to provide a definition of the symbols in that
COMDAT group, gold silently resolves any references to those symbols
to 0.
This patch adds a check for a placeholder symbol when deciding
whether to issue an undefined symbol error. It also adds an extra
note after any undefined placeholder symbol error that explains
that a definition was expected from the plugin.
gold/
PR gold/19842
* errors.cc (Errors::undefined_symbol): Add info message when
symbol should have been provided by a plugin.
* target-reloc.h (issue_undefined_symbol_error): Check for
placeholder symbols defined in discarded sections.
* testsuite/Makefile.am (plugin_test_9b): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_9b_elf.cc: New test source file.
* testsuite/plugin_test_9b_ir.cc: New test source file.
When running ld -r on objects that have comdat groups, when gold
deduplicates a function in a comdat group, it removes the relocations
from the EH information that referred to the dropped copy of the function.
When running a final link using the result of the -r link, the missing
relocation cause it to fail to recognize the FDE for the dropped
function.
This patch improves gold's FDE scanning to take into account the
possibility that an FDE corresponds to a dropped function, and drops
that FDE as well.
Gnu ld, on the other hand, leaves the relocations in the ld -r output,
but makes them R_NONE with an r_sym field of 0. This was sufficient to
let both linkers recognize the FDE properly.
With this fix, if you do an ld -r with gold, then do the final link with
Gnu ld, the .eh_frame_hdr section will not be generated. To make it work
with Gnu ld, we would have to leave the R_NONE relocations in, but I
think it's better to drop the relocations entirely. I'd hope that if
you're doing a -r link with gold, you'll also do the final link with
gold.
gold/
PR gold/19002
* ehframe.cc (Eh_frame::read_fde): Check for dropped functions.
* testsuite/Makefile.am (eh_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/eh_test_2.sh: New test script.
* testsuite/eh_test_a.cc (bar): Make it comdat.
* testsuite/eh_test_b.cc (bar): Add a duplicate copy.
gold/
* mips.cc (enum Special_relocation_symbol): New enum type.
(is_readonly_section): New function.
(eh_reloc): Likewise.
(Mips_got_entry::is_section_symbol_): New member.
(Mips_got_entry::is_section_symbol): New method.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol
argument.
(Mips_relobj::mips_elf_options_section_name): New method.
(Mips_output_data_got::record_local_got_symbol): Add
is_section_symbol argument, and pass it to
Mips_got_info::record_local_got_symbol.
(Mips_output_data_got::got_offset): Add addend argument, and pass
it to Relobj::local_got_offset.
(struct Mips_output_reloc_writer): New type.
(class Mips_output_data_reloc): New class.
(Mips_output_data_plt::Reloc_section): Change type to
Mips_output_data_reloc.
(Target_mips::Reloc_section): Likewise.
(Mips_reloc_types::get_r_addend): Remove unsigned from return type.
(Mips_classify_reloc::get_r_type2): New method.
(Mips_classify_reloc::get_r_type3): Likewise.
(Mips_classify_reloc::get_r_ssym): Likewise.
(Target_mips::Reloca_section): Remove.
(Relocate::should_apply_static_reloc): Rename from
should_apply_r_mips_32_reloc.
(Target_mips::copy_reloc): Replace Reltype parameter with r_type
and r_offset.
(Mips_relocate_functions::Valtype): New type.
(Mips_relocate_functions::Valtype64): New type.
(Mips_relocate_functions::check_overflow): New method.
(Mips_relocate_functions::mips_reloc_unshuffle): Move to public
interface.
(Mips_relocate_functions::mips_reloc_shuffle): Likewise.
(Mips_relocate_functions::rel16): Add support for resolving
relocations for Mips64.
(Mips_relocate_functions::rel32): Likewise.
(Mips_relocate_functions::reljalr): Likewise.
(Mips_relocate_functions::relpc32): Likewise.
(Mips_relocate_functions::rel26): Likewise.
(Mips_relocate_functions::relpc16): Likewise.
(Mips_relocate_functions::relmicromips_pc7_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc10_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc16_s1): Likewise.
(Mips_relocate_functions::do_relhi16): Likewise.
(Mips_relocate_functions::do_relgot16_local): Likewise.
(Mips_relocate_functions::rello16): Likewise.
(Mips_relocate_functions::relgot): Likewise.
(Mips_relocate_functions::relgotpage): Likewise.
(Mips_relocate_functions::relgotofst): Likewise.
(Mips_relocate_functions::relgot_hi16): Likewise.
(Mips_relocate_functions::relgot_lo16): Likewise.
(Mips_relocate_functions::relgprel): Likewise.
(Mips_relocate_functions::relgprel32): Likewise.
(Mips_relocate_functions::tlsrelhi16): Likewise.
(Mips_relocate_functions::tlsrello16): Likewise.
(Mips_relocate_functions::tlsrel32): Likewise.
(Mips_relocate_functions::relsub): Likewise.
(Mips_relocate_functions::releh): New method.
(Mips_relocate_functions::rel64): Likewise.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol and
pass it to Mips_got_entry.
(Mips_got_info::add_local_entries): Pass addend argument
to code functions, and for STT_SECTION symbols call
add_symbolless_local_addend.
(Mips_got_info::add_tls_entries): Pass addend argument to code
functions.
(Mips_relobj::do_read_symbols): Read gp value that was used to
create object.
(Mips_output_data_plt::plt_entry): Remove opcode from l[wd]
instruction. Opcode for instruction will be selected later.
(Target_mips::gc_process_relocs): Add case for SHT_RELA.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::emit_relocs_scan): Likewise.
(Target_mips::relocate_relocs): Likewise.
(Target_mips::do_finalize_sections): Skip objects for merging
processor specific flags in which all input sections will be
discarded.
(mips_get_size_for_reloc): Add case for R_MIPS_EH.
(Target_mips::Scan::get_reference_flags): Likewise.
(Target_mips::relocate_special_relocatable): Call rel26 method with
calculate_only and calculated_value arguments.
(Target_mips::Scan::local): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass
is_section_symbol to Mips_got_info::record_local_got_symbol.
(Target_mips::Scan::global): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass r_type
and r_offset to Target_mips::copy_reloc.
(Target_mips::Relocate::relocate): Add support for resolving
relocations for Mips64.
(Target_mips::mips_info): Add case for Mips64 default dynamic
linker name.
(Target_selector_mips): Correct emulation names.
G++ in GCC 4.2 silently ignores
---
__attribute__ ((section(".rodata.v1_a2")))
const short rodata_item1 = 101;
---
which leads to plugin_layout_with_alignment test failure with
Expected 12 sections, found 8 sections
since 4 .rodata sections are missing. As a workaround, this patch
changes plugin_layout_with_alignment test from C++ to C.
* testsuite/plugin_layout_with_alignment.cc: Renamed to ..
* testsuite/plugin_layout_with_alignment.c: This.
* testsuite/Makefile.am (plugin_layout_with_alignment.o): Updated.
(plugin_layout_with_alignment): Likewise.
* testsuite/Makefile.in: Regenerated.
GCC 6 does not generate constructors for two of gold's test cases.
This patch simply removes the checks for them.
gold/
PR 19751
* testsuite/Makefile.am (retain_symbols_file_test): Remove check
for constructor.
* testsuite/Makefile.in: Regenerate.
* testsuite/dynamic_list.sh: Likewise.
* testsuite/retain_symbols_file_test.sh: Likewise.
This patch is a simple refactoring that will allow the MIPS backend to
replace the Output_data_reloc_base::do_write() method without copying
its entire implementation. I've moved the implementation of do_write()
into a function template, which can be instantiated with a custom
class to write the MIPS-specific relocation format. The custom class
for MIPS needs access to the symbol index and address from
Output_reloc, so I've included the part of Vlad's MIPS-64 patch that
makes those accessor methods public.
2016-03-08 Cary Coutant <ccoutant@gmail.com>
Vladimir Radosavljevic <vladimir.radosavljevic@imgtec.com>
gold/
* output.cc (Output_reloc_writer): New type.
(Output_data_reloc_base::do_write): Move implementation to template
in output.h and replace with invocation of template.
* output.h (Output_file): Move to top of file.
(Output_reloc::get_symbol_index): Move to public interface.
(Output_reloc::get_address): Likewise.
(Output_data_reloc_base::do_write_generic): New function template.
gold/
PR gold/19019
* layout.h (Layout::add_target_specific_dynamic_tag): New function.
* layout.cc (Layout::add_target_specific_dynamic_tag): New function.
* mips.cc (Target_mips::make_symbol): Adjust function signature.
* sparc.cc (Target_sparc::Target_sparc): Initialize register_syms_.
(Target_sparc::do_is_defined_by_abi): Remove test for
STT_SPARC_REGISTER.
(Target_sparc::Register_symbol): New struct type.
(Target_sparc::register_syms_): New data member.
(Target_sparc<64, true>::sparc_info): Set has_make_symbol to true.
(Target_sparc::make_symbol): New function.
(Target_sparc::do_finalize_sections): Add register symbols and new
dynamic table entries.
* symtab.h (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::add_target_global_symbol): New function.
(Symbol_table::target_symbols_): New data member.
* symtab.cc (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::Symbol_table): Initialize target_symbols_.
(Symbol_table::add_from_object): Pass additional parameters to
Target::make_symbol.
(Symbol_table::define_special_symbol): Likewise.
(Symbol_table::add_undefined_symbol_from_command_line): Pass 0 for
undefined symbol value.
(Symbol_table::set_dynsym_indexes): Process target-specific symbols.
(Symbol_table::sized_finalize): Likewise.
(Symbol_table::sized_write_globals): Likewise.
* target.h (Sized_target::make_symbol): Add name, st_type, object,
st_shndx, and value parameters.
include/
2016-03-03 Than McIntosh <thanm@google.com>
* plugin-api.h: Add new hooks to the plugin transfer vector to
to support querying section alignment and section size.
(ld_plugin_get_input_section_alignment): New hook.
(ld_plugin_get_input_section_size): New hook.
(ld_plugin_tag): Add LDPT_GET_INPUT_SECTION_ALIGNMENT
and LDPT_GET_INPUT_SECTION_SIZE.
(ld_plugin_tv): Add tv_get_input_section_alignment and
tv_get_input_section_size.
gold/
2016-03-03 Than McIntosh <thanm@google.com>
* plugin.cc (Plugin::load): Include hooks for get_input_section_size
and get_input_section_alignment in transfer vector.
(get_input_section_alignment): New function.
(get_input_section_size): New function.
* testsuite/Makefile.am: Add plugin_layout_with_alignment.sh test.
* testsuite/Makefile.in: [Regenerate.]
* testsuite/plugin_section_alignment.cc: New test file.
* testsuite/plugin_layout_with_alignment.cc: New test file.
* testsuite/plugin_layout_with_alignment.sh: New test file.
