Some of these tests were excluded for ns32k-netbsd, exclude for all
ns32k instead.
binutils/
* testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
* testsuite/binutils-all/copy-3.d: Likewise.
gas/
* testsuite/gas/all/gas.exp: Remove ns32k xfails.
* testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*.
ld/
* testsuite/ld-scripts/pr20302.d: Don't run for ns32k-*-*.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-undefined/require-defined.exp: Likewise.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
This fixes the testcases that are failing due to my recent patch.
It turns out that the start address across baremetal and linux builds
isn't entirely predictable without a linker script. Since the address
themselves are not the important thing I am ignoring them now.
Secondly I was encoding data using .word using non 0 values, however
because .word is subjected to endiannes these non-zero values under
big-endian happen to fall into the encoding space of instructions which
changes the disassembly. Using 0 fixes this problem and the purpose of
the test still holds, though objdump will dump ... for data only sections,
which is ok as the data/insn mixed sections will test the patch.
The ARM Attributes sections is not important and is ignored.
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
* testsuite/binutils-all/arm/in-order-all.d: Likewise.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.s: Likewise.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The documentation for -D says that on Arm platforms -D should disassemble
data as instructions.
"If the target is an ARM architecture this switch also has the effect of
forcing the disassembler to decode pieces of data found in code sections
as if they were instructions. "
This makes it do as it says on the tincan so it's more consistent with
aarch32. The usecase here is for baremetal developers who have created
their instructions using .word directives instead if .insn.
Though for Linux users I do find this behavior somewhat non-optimal.
Perhaps there should be a new flag that just disassembles the values
following the actual mapping symbol?
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d:
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64):
Implement override.
My previous patch for AArch64 was not enough to catch all the cases where
disassembling an out-of-order section could go wrong. It had missed the case
DATA sections could be incorrectly disassembled as TEXT.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for AArch64 [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix this
we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section than
we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
well.
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search
order.
The AArch64 disassembler has an optimization that it uses to reduce the amount
it has to search for mapping symbols during disassembly. This optimization
assumes that sections are listed in the section header in monotonic increasing
VMAs. However this is not a requirement for the ELF specification.
Because of this when such "out of order" sections occur the disassembler would
pick the wrong mapping symbol to disassemble the section with.
This fixes it by explicitly passing along the stop offset for the current
disassembly glob and when this changes compared to the previous one we've seen
the optimization won't be performed. In effect this restarts the search from
a well defined starting point. Usually the symbol's address.
The existing stop_vma can't be used for this as it is allowed to be unset and
setting this unconditionally would change the semantics of this field.
binutils/ChangeLog:
* objdump.c (disassemble_bytes): Pass stop_offset.
* testsuite/binutils-all/aarch64/out-of-order.T: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.s: New test.
include/ChangeLog:
* dis-asm.h (struct disassemble_info): Add stop_offset.
opcodes/ChangeLog:
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds new definitions of PAC enabled PLTs
and both BTI and PAC enabled PLTs.
2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT
for the PAC enabled PLTs.
3) This patch adds a new ld command line option: --pac-plt.
In the presence of this option, the linker uses the PAC
enabled PLTs and marks with DT_AARCH64_PAC_PLT.
4) In case both BTI and PAC are enabled the linker should
pick PLTs enabled with both and also use dynamic tags for both.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New.
(PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New.
(setup_plt_values): Account for PAC or PAC and BTI enabled PLTs.
(elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC
and PLT_PAC_PLT.
(elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC.
(get_plt_type): Add case for DT_AARCH64_PAC_PLT.
(elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (get_aarch64_dynamic_type): Add case for
DT_AARCH64_PAC_PLT.
(dynamic_section_aarch64_val): Likewise.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/aarch64.h (DT_AARCH64_PAC_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document --pac-plt.
* emultempl/aarch64elf.em (OPTION_PAC_PLT): New.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT.
* testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests.
* testsuite/ld-aarch64/bti-pac-plt-1.d: New test.
* testsuite/ld-aarch64/bti-pac-plt-2.d: New test.
* testsuite/ld-aarch64/pac-plt-1.d: New test.
* testsuite/ld-aarch64/pac-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds a new ld command line option: --force-bti.
In the presence of this option, the linker enables BTI with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning
in case of missing gnu notes for BTI in inputs.
2) It also defines a new set of BTI enabled PLTs. These are used either
when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI
or when the new --force-bti option is used. This required adding new
fields in elf_aarch64_link_hash_table so that we could make the PLT
related information more generic.
3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses
this whenever it picks BTI enabled PLTs.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New.
(aarch64_bti_pac_info): New.
(bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument.
(bfd_elf32_aarch64_set_options): Likewise.
* bfd-in2.h: Regenerate
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New.
(elfNN_aarch64_small_plt0_bti_entry): New.
(elfNN_aarch64_small_plt_bti_entry): New.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): New.
(elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields.
(elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and
tlsdesc_plt_entry_size fields.
(elfNN_aarch64_link_hash_table_create): Initialise the new fields.
(setup_plt_values): New helper function.
(bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and
bti enable type.
(elfNN_aarch64_allocate_dynrelocs): Use new size members instead of
fixed macros.
(elfNN_aarch64_size_dynamic_sections): Likewise and add checks.
(elfNN_aarch64_create_small_pltn_entry): Use new generic pointers
to plt stubs instead of fixed ones and update filling them according
to the need for bti.
(elfNN_aarch64_init_small_plt0_entry): Likewise.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(get_plt_type, elfNN_aarch64_get_synthetic_symtab): New.
(elfNN_aarch64_plt_sym_val): Update size accordingly.
(elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE
is set.
(bfd_elfNN_get_synthetic_symtab): Define.
(elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti
and mising BTI NOTE SECTION.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* readelf.c (get_aarch64_dynamic_type): New.
(get_dynamic_type): Use above for EM_AARCH64.
(dynamic_section_aarch64_val): New.
(process_dynamic_section): Use above for EM_AARCH64.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf/aarch64.h (DT_AARCH64_BTI_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* NEWS: Document --force-bti.
* emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New.
(PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI.
* testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below.
* testsuite/ld-aarch64/bti-plt-1.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: New test.
* testsuite/ld-aarch64/bti-plt-2.s: New test.
* testsuite/ld-aarch64/bti-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-3.d: New test.
* testsuite/ld-aarch64/bti-plt-4.d: New test.
* testsuite/ld-aarch64/bti-plt-5.d: New test.
* testsuite/ld-aarch64/bti-plt-6.d: New test.
* testsuite/ld-aarch64/bti-plt-7.d: New test.
* testsuite/ld-aarch64/bti-plt-so.s: New test.
* testsuite/ld-aarch64/bti-plt.ld: New test.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
This patch implements the following:
1) This extends in the gnu property support in the linker for
AArch64 by defining backend hooks for elf_backend_setup_gnu_properties,
elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties.
2) It defines AArch64 specific GNU property
GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it.
3) It also adds support in readelf.c to read and print these new
GNU properties in AArch64.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude
linker created inputs from merge.
* elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for
GNU_PROPERTY_AARCH64_FEATURE_1_AND properties.
(elfNN_aarch64_link_setup_gnu_properties): New.
(elfNN_aarch64_merge_gnu_properties): New.
(elf_backend_setup_gnu_properties): Define for AArch64.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define.
(_bfd_aarch64_elf_parse_gnu_properties): Define.
(_bfd_aarch64_elf_merge_gnu_properties): Define.
* elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare.
(_bfd_aarch64_elf_parse_gnu_properties): Declare.
(_bfd_aarch64_elf_merge_gnu_properties): Declare.
(elf_backend_parse_gnu_properties): Define for AArch64.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (decode_aarch64_feature_1_and): New.
(print_gnu_property_note): Add case for AArch64 gnu notes.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC.
* testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests.
* testsuite/ld-aarch64/property-bti-pac1.d: New test.
* testsuite/ld-aarch64/property-bti-pac1.s: New test.
* testsuite/ld-aarch64/property-bti-pac2.d: New test.
* testsuite/ld-aarch64/property-bti-pac2.s: New test.
* testsuite/ld-aarch64/property-bti-pac3.d: New test.
Compressed debug sections can have uncompressed sizes that exceed the
original file size, so we can't use bfd_get_file_size. objdump also
used bfd_get_file_size to limit reloc section size, but I believe the
underlying bug causing the PR22508 out of bounds buffer access was
that we had an integer overflow when calculating the reloc buffer
size. I've fixed that instead in most of the backends, som and
vms-alpha being the exceptions. SOM and vmd-alpha have rather more
serious bugs in their slurp_relocs routines that would need fixing
first if we want to fuss about making them safe against fuzzed object
files.
The patch also fixes a number of other potential overflows by using
the bfd_alloc2/malloc2/zalloc2 memory allocation functions.
bfd/
* coffcode.h (buy_and_read): Delete unnecessary forward decl. Add
nmemb parameter. Use bfd_alloc2.
(coff_slurp_line_table): Use bfd_alloc2. Update buy_and_read calls.
Delete assertion.
(coff_slurp_symbol_table): Use bfd_alloc2 and bfd_zalloc2.
(coff_slurp_reloc_table): Use bfd_alloc2. Update buy_and_read calls.
* coffgen.c (coff_get_reloc_upper_bound): Ensure size calculation
doesn't overflow.
* elf.c (bfd_section_from_shdr): Use bfd_zalloc2. Style fix.
(assign_section_numbers): Style fix.
(swap_out_syms): Use bfd_malloc2.
(_bfd_elf_get_reloc_upper_bound): Ensure size calculation doesn't
overflow.
(_bfd_elf_make_empty_symbol): Style fix.
(elfobj_grok_stapsdt_note_1): Formatting.
* elfcode.h (elf_object_p): Use bfd_alloc2.
(elf_write_relocs, elf_write_shdrs_and_ehdr): Likewise.
(elf_slurp_symbol_table): Use bfd_zalloc2.
(elf_slurp_reloc_table): Use bfd_alloc2.
(_bfd_elf_bfd_from_remote_memory): Use bfd_malloc2.
* elf64-sparc (elf64_sparc_get_reloc_upper_bound): Ensure
size calculation doesn't overflow.
(elf64_sparc_get_dynamic_reloc_upper_bound): Likewise.
* mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
* pdp11.c (get_reloc_upper_bound): Copy aoutx.h version.
binutils/
* objdump.c (load_specific_debug_section): Don't compare section
size against file size.
(dump_relocs_in_section): Don't compare reloc size against file size.
Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
Committed on behalf of Matthew Malcomson.
This allows checking the command line parsing more easily than before by
allowing many command line invokations from the same .d file.
Each line is used as a set of flags, and the tests are ran against the output
of the assembler with each set.
Each line of assembler is treated as another set of tests (as if the test file
were copied to another with a different #as: line).
This patch includes some example uses where multiple testcases can be merged
into one file using this new functionality.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
gas/ChangeLog:
* testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines.
* testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove.
* testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove.
* testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as"
lines.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove.
* testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
* objdump.c (sym_ok): New function.
(find_symbol_for_address): Use new function.
(disassemble_section): Compare sections by name, not pointer.
(dump_dwarf): Move code to initialise byte_get pointer and iterate
over separate debug files from here to ...
(dump_bfd): ... here. Add parameter indicating that a separate
debug info file is being dumped. For main file, pull in the
symbol tables from all separate debug info files.
(display_object): Update call to dump_bfd.
* doc/binutils.texi: Document extened behaviour of the
--dwarf=follow-links option.
* NEWS: Mention this new feature.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
options and dump file parameters.
Add extra test.
* testsuite/binutils-all/objdump.WK3: New file.
* testsuite/binutils-all/readelf.exp: Change expected output for
readelf -wKis test.
* testsuite/binutils-all/readelf.wKis: New file.
PR 23843
* dwarf.h (struct separate_info): New structure for containing
information on separate debug info files.
* dwarf.c (struct dwo_info): New structure for containing dwo
links.
(first_dwo_info): Chain of dwo_info structures.
(first_separate_file): Chain of separate_info structures.
(separate_debug_file, separate_debug_filename): Delete.
(fetch_alt_indirect_string): Scan all separate debug info files
for the requested string.
(add_dwo_info): New function.
(add_dwo_name): New function.
(add_dwo_dir): New function.
(add_dwo_id: New function.
(free_dwo_info): New function.
(read_and_display_attr_value): Store DWO data using the new
functions.
(load_debug_section_with_follow): If necessary, scan the list of
separate debug info files for the requested section.
(add_separate_debug_file): New function.
(load_separate_debug_info): Call add_separate_debug_file to store
the information on the newly loaded file.
(load_dwo_file): Likewise.
(load_separate_debif_file): Rename to load_separate_debug_files.
Change return type to boolean. If following links then attempt to
load all separate debug info files, not just the first one.
(free_debug_memory): Release memory in dwo_info and separate_info
chains.
* objdump.c (dump_dwarf): Iterate over all loaded debg info files.
* readelf.c (process_object): Likewise.
* doc/debug.options.texi: Update descriptions of links and
follow-links options.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/readelf.k2: Likewise.
* NEWS: Announce the new feature.
PR 24244
* unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
prevent walking off the end of the buffer.
(unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
(unw_decode_x2): Likewise.
(unw_decode_x3): Likewise.
(unw_decode_x4): Likewise.
(unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
(unw_decode_r3): Likewise.
(unw_decode_p7_p10): Likewise.
(unw_decode_b2): Likewise.
(unw_decode_b3_x4): Likewise.
PR 24132
PR 24138
* readelf.c (get_data): Avoid possibility of overflow when
checking for a read that may extend past end of file.
(process_program_headers): Likewise.
The size tool currently defaults to berkeley format output. However,
this output format has a weird quirk, read-only data is counted
against the text sections, not the data sections.
The code offers no real explanation for why this is, but I'm reluctant
to change it for two reasons, first, I'm assuming it probably makes
sense in some case that I'm not thinking of (maybe a target where
sections are not marked executable, and so there's no distinction
between read-only data and code), and second, the code has been this
way for at least 20 years, I worry that changing things now might
cause more confusion than it solves.
This commit then introduces a new output format for the size tool,
this new format displays the results in a similar manor to the
berkeley format, but counts read-only data in the data column, and
only executable sections are counted in the text column.
Given that this is a brand new output format I've gone ahead and
simplified things a little, while the berkeley format displays the
total twice, once in decimal and once in hex, the new display format
just displays the total in decimal. Of course, there's still the
'--radix' option which can be used to display all the results in
hexadecimal or octal.
I've called the new format 'gnu', so '--format=gnu' or '-G' are used
to access it.
binutils/ChangeLog:
* size.c (berkeley_format): Delete.
(enum output_format): New enum.
(selected_output_format): New variable.
(usage): Update to mention GNU format.
(main): Update to extract options, and select format as needed.
Handle GNU format where needed.
(berkeley_sum): Renamed to...
(berkeley_or_gnu_sum): ...this, and updated to handle both formats.
(berkeley_format): Renamed to...
(berkeley_or_gnu_format): ...this, and updated to handle both
formats.
(print_sizes): Handle GNU format.
* doc/binutils.texi (size): Document new GNU format.
* testsuite/binutils-all/size.exp: Add test of extended
functionality.
* NEWS: Mention new functionality.
The example output from size in Berkeley format is out of date. The
columns are now displayed right aligned. This patch updates the
documentation to reflect reality.
binutils/ChangeLog:
* doc/binutils.texi (size): Update example output for Berkeley
format output.
bfd * config.bfd: Move the powerpc-lynxos and powerpc-windiss targets
into the definitely obsolete list.
binutils * README-how-to-make-a-release: Add a note about updating the
obsolete targets in the bfd/config.bfd file.
PR 24131
* readelf.c (process_notes_at): Prevent an illegal memory access
when the note's namesize is zero.
(decode_tic6x_unwind_bytecode): Add code to handle the case where
no registers are specified in a frame pop instruction.
* objdump.c (disassemble_section): When disassembling from a
symbol only stop at the next symbol if the original symbol was not
a function symbol. Otherwise continue disassembling until a new
function is reached.
* testsuite/binutils-all/objdump.exp: Add tests of extended
functionality.
* testsuite/binutils-all/disasm.s: New test source file.
