tui_check_and_display_highlight_if_needed currently checks the
window's type; but this can be replaced with a check of
"can_highlight", making it more polymorphically-correct.
gdb/ChangeLog
2019-07-17 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c
(tui_check_and_display_highlight_if_needed): Check can_highlight.
This introduces a "can_scroll" method, removing a spot that explicitly
checks a window's type.
gdb/ChangeLog
2019-07-17 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_win_info) <can_scroll>: New method.
(struct tui_cmd_window) <can_scroll>: New method.
* tui/tui-command.c (tui_dispatch_ctrl_char): Use can_scroll
method.
Non-const reference parameter should be avoided according to the GDB
coding standard:
https://sourceware.org/gdb/wiki/Internals%20GDB-C-Coding-Standards#Avoid_non-const_reference_parameters.2C_use_pointers_instead
This commit updates the gdbarch method gdbarch_stap_adjust_register,
and the one implementation i386_stap_adjust_register to avoid using a
non-const reference parameter.
I've also removed the kfail from the testsuite for bug 24541, as this
issue is now resolved.
gdb/ChangeLog:
PR breakpoints/24541
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh: Adjust return type and parameter types for
'stap_adjust_register'.
(i386_stap_adjust_register): Adjust signature and return new
register name.
* stap-probe.c (stap_parse_register_operand): Adjust use of
'gdbarch_stap_adjust_register'.
gdb/testsuite/ChangeLog:
PR breakpoints/24541
* gdb.mi/mi-catch-cpp-exceptions.exp: Remove kfail due to 24541.
This removes a use of VEC fro s390-linux-nat.c, replacing it with
std::vector.
Tested using the Fedora-s390x-m64 buildbot builder.
gdb/ChangeLog
2019-07-17 Tom Tromey <tromey@adacore.com>
* s390-linux-nat.c (s390_watch_area): Remove typedef. Don't
declare VEC.
(struct s390_debug_reg_state) <watch_areas, break_areas>: Now
std::vector.
(struct s390_process_info): Add initializers.
(s390_add_process): Use new.
(s390_linux_nat_target::low_forget_process): Use delete.
(s390_linux_nat_target::low_new_fork)
(s390_linux_nat_target::stopped_by_watchpoint)
(s390_linux_nat_target::low_prepare_to_resume)
(s390_linux_nat_target::insert_watchpoint)
(s390_linux_nat_target::insert_hw_breakpoint)
(s390_linux_nat_target::remove_watchpoint)
(s390_linux_nat_target::remove_hw_breakpoint): Update.
Once operand parsing has completed, the simpler check of Operand_Mem can
be used in places where i.types[] got passed to operand_type_check().
Note that this has shown a couple of omissions of adjusting i.flags[]
when playing with i.op[] / i.types[] / i.tm.operand_types[]. Not all of
them get added here, just all of the ones needed in process_operands().
This was supposed to also be removed by c48dadc9a8 ('x86: drop "mem"
operand type attribute'). It's odd enough that this hasn't caused
build issues, considering the careful use of OTunused (apparently to
avoid "missing initializer" warnings).
To avoid such happening again introduce compile time consistency
checks.
... instead of an operand type bit: It's an insn property, not an
operand one. There's just one actual change to be made to the
templates: Most are now required to have the (unswapped) destination go
into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly
and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this
regard, as otherwise generated code would differ from what we've been
producing so far (which I don't think is wanted).
Take the opportunity and add a missing IgnoreSize to pextrb (leading to
an error in 16-bit mode), and take the liberty to once again drop stray
IgnoreSize attributes from lines changed and neighboring related ones.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
Remove unused gdbarch argument to helper functions originally
copied from mips-fbsd-nat.c. Include regcache.h previously
included from defs.h via gdbarch.h.
gdb/ChangeLog:
* aarch64-fbsd-nat.c: Include regcache.h.
(getregs_supplies, getfpregs_supplies): Remove unused gdbarch
argument.
(aarch64_fbsd_nat_target::fetch_registers)
(aarch64_fbsd_nat_target::store_registers): Remove gdbarch
variable.
* arm-fbsd-nat.c, riscv-fbsd-nat.c: Likewise.
This removes a FIXME comment from mi_ui_out::do_field_int, by
replacing a printf with a use of plongest.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-out.c (mi_ui_out::do_field_int): Use plongest.
This adds field_unsigned and changes various places using field_fmt
with "%u" to use this instead. This also replaces an existing
equivalent helper function in record-btrace.c.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-out.h (class mi_ui_out) <do_field_unsigned>: Declare.
* mi/mi-out.c (mi_ui_out::do_field_unsigned): New method.
* cli-out.h (class cli_ui_out) <do_field_unsigned>: Declare.
* cli-out.c (cli_ui_out::do_field_int): New method.
* ui-out.c (ui_out::field_unsigned): New method.
* symfile.c (generic_load): Use field_unsigned.
(print_transfer_performance): Likewise.
* record-btrace.c (ui_out_field_uint): Remove.
(btrace_call_history_insn_range, btrace_call_history): Use
field_unsigned.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Use
field_unsigned.
* ui-out.h (class ui_out) <field_unsigned>: New method.
<do_field_unsigned>: Likewise.
This replaces uses of field_fmt with a "%s" format string to use
field_string instead. Also, one use of "%9lx" is replaced with a call
to phex_nz; the '9' is dropped as it is implicit in the field width.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-main.c (list_available_thread_groups): Use field_string.
* mi/mi-interp.c (mi_memory_changed): Use field_string.
* target.c (flash_erase_command): Use field_string.
* infrun.c (print_signal_received_reason): Use field_string.
* i386-tdep.c (i386_mpx_print_bounds): Use field_string.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Use
field_string.
* ada-tasks.c (print_ada_task_info): Use field_string.
This changes a few spots that use field_fmt to use field_core_addr
instead.
gdb/ChangeLog
2019-07-15 Tom Tromey <tromey@adacore.com>
* target.c (flash_erase_command): Use field_core_addr.
* symfile.c (generic_load): Use field_core_addr.
* sparc64-linux-tdep.c (sparc64_linux_handle_segmentation_fault):
Use field_core_addr.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Use
field_core_addr.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
> Building LLVM 6.0 on FreeBSD/powerpc (devel/llvm60 port) the assertion
> in the subject trips (displays twice) when linking libLTO.so.1. The
> issue has been filed in FreeBSD's bugzilla, at
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=237068 . It appears
> the 'llvm::hashing::detail::get_execution_seed()::seed@@JL_LLVM_6.0'
> symbol is being weakly aliased to an indirect symbol
> __bss_start@@JL_LLVM_6.0. Since __bss_start@@JL_LLVM_6.0 is an
> indirect symbol, it fails the assertion.
I haven't looked under a debugger at your testcase but I think I know
what is going on here. You have a shared library with a weakly
defined llvm::hashing::detail::get_execution_seed()::seed which
happens to be at the same location as __bss_start in that library. At
the time the linker loads symbols for that library, it sees they are
both versioned and thus introduces non-versioned indirect symbols for
them. The linker considers the symbols as possibly being aliases,
setting up h->u.alias and h->is_weakalias such that
__bss_start@@JL_LLVM_6.0 is the definition. No real problem so far,
the definition is bfd_link_hash_defined, except that the zero size, no
type __bss_start symbol possibly should not be considered an alias in
the first place.
Later, __bss_start as defined by the linker script is entered into the
linker symbol table. This is similar to __bss_start being defined by
a regular object file in that ELF symbol resolution rules say that the
value of __bss_start in the library is overridden by __bss_start in
the executable/library being produced. So to accomplish the override,
ld flips __bss_start from being an indirect symbol pointing at
__bss_start@@JL_LLVM_6.0 to __bss_start@@JL_LLVM_6.0 being an indirect
symbol pointing at __bss_start. That's how we get an unexpected
indirect symbol and hit the assert.
What should happen I think, is for the def->def_regular code above the
assert to run in this case. The symbols are no longer aliases.
* elflink.c (_bfd_elf_fix_symbol_flags): If the def for an
alias is no longer bfd_link_hash_defined, clear the alias.
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
A recent change renamed the common/ directory into gdbsupport/ in gdb.
This causes problems in the getver function in the src-release script
which doesn't find the create-version.sh script anymore. As a result,
it falls back on using the version.in file verbatim, meaning that
the "DATE" placeholder doesn't get replaced with the snapshot date,
and the "-git" suffix doesn't get stripped. More precisely, we get
snapshots called "gdb-8.3.50-DATE-git.tar" instead of (e.g.)
"gdb-8.3-20190712.tar".
This commit fixes the issue by adding support for this situation.
I left the support for $tool/common/create-version.sh, because
the sim still uses that directory structure.
ChangeLog:
* src-release (getver): If $tool/gdbsupport/create-version.sh
exists, use that to determine the version number.
It is possible to create shared libraries on PowerPC using
-ftls-model=inital-exec or -ftls-model=local-exec. The first is half
reasonable, getting you a shared library that can't be dlopen'd but
otherwise is reasonable. The second is quite bad. Not only do you
lose being able to dlopen, the library also has dynamic text
relocations. Worse, the TPREL16_LO, TPREL16_HA and other TPREL16
dynamic relocs emitted were wrong, resulting in wrong values being
applied by ld.so.
Using the first TLS section symbol in dynamic relocations for local
TLS symbols doesn't work. It's wrong because TLS symbols used by TLS
relocs have values relative to the TLS segment, whereas the TLS
section symbols are addresses. This patch instead uses a symbol index
of zero which is used elsewhere by PowerPC on dynamic TLS relocs.
It's not strictly ABI compliant to use a non-TLS symbol with TLS
relocs but symbol index zero can be interpreted as "no symbol". Not
using the first TLS section symbol means it doesn't need to be dynamic.
The patch also fixes a further problem with PowerPC32 dynamic TPREL16*
relocs, which shouldn't have the symbol value in the addend as we do
for non-TLS symbols.
bfd/
* elflink.c (_bfd_elf_omit_section_dynsym_default): Don't keep
tls_sec.
(_bfd_elf_init_1_index_section): Prefer not using TLS sections.
(_bfd_elf_init_2_index_sections): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): When emitting dynamic
relocations for local TLS symbols, use STN_UNDEF as the relocation
symbol.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise, and don't
leave TLS symbol value in the addend.
ld/
* testsuite/ld-powerpc/tlsso.r: Update.
* testsuite/ld-powerpc/tlsso32.g: Update.
* testsuite/ld-powerpc/tlsso32.r: Update.
* testsuite/ld-powerpc/tlstocso.r: Update.
* testsuite/ld-cris/tls-dso-dtpoffd2.d: Update.
* testsuite/ld-cris/tls-dso-dtpoffd4.d: Update.
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d: Update.
* testsuite/ld-cris/tls-gd-1.d: Update.
* testsuite/ld-cris/tls-gd-1h.d: Update.
* testsuite/ld-cris/tls-gd-2.d: Update.
* testsuite/ld-cris/tls-gd-2h.d: Update.
* testsuite/ld-cris/tls-ie-10.d: Update.
* testsuite/ld-cris/tls-ie-11.d: Update.
* testsuite/ld-cris/tls-ie-8.d: Update.
* testsuite/ld-cris/tls-ie-9.d: Update.
* testsuite/ld-cris/tls-js1.d: Update.
* testsuite/ld-cris/tls-ld-4.d: Update.
* testsuite/ld-cris/tls-ld-5.d: Update.
* testsuite/ld-cris/tls-ld-6.d: Update.
* testsuite/ld-cris/tls-ld-7.d: Update.
* testsuite/ld-cris/tls-ldgd-14.d: Update.
* testsuite/ld-cris/tls-ldgd-15.d: Update.
* testsuite/ld-cris/tls-ldgdx-14.d: Update.
* testsuite/ld-cris/tls-ldgdx-15.d: Update.
* testsuite/ld-cris/tls-local-54.d: Update.
* testsuite/ld-cris/tls-local-60.d: Update.
* testsuite/ld-cris/tls-local-61.d: Update.
* testsuite/ld-cris/tls-local-63.d: Update.
* testsuite/ld-cris/tls-local-64.d: Update.
* testsuite/ld-cris/tls-ok-30.d: Update.
* testsuite/ld-cris/tls-ok-32.d: Update.
* testsuite/ld-cris/tls-ok-34.d: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Update.
* testsuite/ld-mips-elf/tlslib-o32.got: Update.
* testsuite/ld-s390/tlspic.rd: Update.
* testsuite/ld-s390/tlspic_64.rd: Update.
* testsuite/ld-sparc/tlssunnopic32.rd: Update.
* testsuite/ld-sparc/tlssunnopic64.rd: Update.
* testsuite/ld-sparc/tlssunpic32.rd: Update.
* testsuite/ld-sparc/tlssunpic64.rd: Update.
This stops the first overlay section being ignored when empty,
losing its LMA assignment
PR 24786
* ldlang.h (enum section_type): Add first_overlay_section.
* ldlang.c (lang_add_section): Adjust switch statement.
(map_input_to_output_sections): Likewise.
(lang_size_sections_1): Always set last_os for first overlay section.
(lang_leave_overlay): Set sectype to first_overlay_section.
Note that gold won't remove unused GOT entries, in contrast to ld.bfd
which will.
* powerpc.cc (Powerpc_relobj::make_got_relative): New function.
(relative_value_is_known): New functions.
(Target_powerpc::Relocate::relocate): Edit code using
GOT16_HA, GOT16_LO_DS, and GOT_PCREL34 relocs.
When generating notoc call and branch stubs without the benefit of
pc-relative insns, the stubs need to use LR to access the run time PC.
All LR changes must be described in .eh_frame if we're to support
unwinding through asynchronous exceptions. That's what this patch
does.
The patch has gone through way too many iterations. At first I
attempted to add multiple FDEs, one for each stub. That ran into
difficulties with do_plt_fde_location which is only capable of setting
the address of a single FDE per Output_data section, and with removing
any FDEs added on a previous do_relax pass. Removing FDEs (git commit
be897fb774) went overboard in matching the FDE contents. That means
either stashing the contents created for add_eh_frame_for_plt to use
when calling remove_eh_frame_for_plt, or recreating contents on the
fly (*) just to remove FDEs. In fact, FDE content matching is quite
unnecesary. FDEs added by a previous do_relax pass are those with
u_.from_linker.post_map set. So they can easily be recognised just by
looking at that flag. This patch keeps that part of the multiple FDE
changes.
In the end I went for just one FDE per stub group to describe the call
stubs. That's reasonably efficient for the common case of only
needing to describe the __tls_get_addr_opt call stub. We don't expect
to be making many calls using notoc stubs without pc-relative insns.
*) Which has it's own set of problems. The contents must be recreated
using the old stub layout, but .eh_frame size can affect stub
requirements so you need to temporarily keep the old .eh_frame size
when creating new stubs, then reset .eh_frame size before adding new
FDEs.
* ehframe.cc (Fde::operator==): Delete.
(Cie::remove_fde): Delete.
(Eh_frame::remove_ehframe_for_plt): Delete fde_data and fde_length
parameters. Remove all post-map plt FDEs.
* ehframe.h (Fde:post_map): Make const, add variant to compare plt.
(Fde::operator==): Delete.
(Cie::remove_fde): Implement here.
(Cie::last_fde): New accessor.
(Eh_frame::remove_ehframe_for_plt): Update prototype.
* layout.cc (Layout::remove_eh_frame_for_plt): Delete fde_data and
fde_length parameters.
* layout.h (Layout::remove_eh_frame_for_plt): Update prototype.
* powerpc.cc (Stub_table::tls_get_addr_opt_bctrl_): Delete.
(Stub_table::plt_fde_len_, plt_fde_, init_plt_fde): Delete.
(Stub_table::add_plt_call_entry): Don't set tls_get_addr_opt_bctrl_.
(eh_advance): New function.
(stub_sort): New function.
(Stub_table::add_eh_frame): Emit eh_frame for notoc plt calls and
branches as well as __tls_get_addr_opt plt call stub.
(Stub_table::remove_eh_frame): Update to suit.
Calls from notoc functions via the PLT need different stubs. Even
calls to local functions requiring a valid toc pointer must go via a
stub. This patch provides the support in gold.
elfcpp/
* powerpc.h (R_PPC64_PLTSEQ_NOTOC, R_PPC64_PLTCALL_NOTOC): Define.
gold/
* powerpc.cc (Target_powerpc::maybe_skip_tls_get_addr_call): Handle
notoc calls.
(is_branch_reloc): Template on size. Return true for REL24_NOTOC.
Update all callers.
(max_branch_delta): Likewise.
(Target_powerpc::Branch_info::make_stub): Add a stub for notoc
calls to functions needing a valid toc pointer.
(Target_powerpc::do_relax): Layout stubs again if any need resize.
(add_12_11_12, addi_12_11, addis_12_11, ldx_12_11_12, ori_12_12_0),
(oris_12_12_0, sldi_12_12_32): Define.
(Stub_table::Plt_stub_ent): Add notoc_ and iter_ fields.
(Stub_table::Branch_stub_key, Branch_stub_key_hash): Rename from
Branch_stub_ent and Branch_stub_ent hash. Remove save_res_ from key.
(Stub_table::Branch_stub_ent): New struct.
(class Stub_table): Add need_resize and resizing vars.
(Stub_table::need_resize, branch_size): New accessors.
(Stub_table::set_resizing): New function.
(Stub_table::add_plt_call_entry): Handle notoc calls and resizing
on seeing such or a tocsave stubs after a normal stub using the
same sym.
(Stub_table::add_long_branch_entry): Similarly.
(Stub_table::find_long_branch_entry): Return a Branch_stub_ent*.
(Stub_table::define_stub_syms): Adjust
(Stub_table::build_tls_opt_head, build_tls_opt_tail): New functions.
(build_notoc_offset): New function.
(Stub_table::plt_call_size): Move out of line. Handle notoc calls.
(Stub_table::branch_stub_size): Similarly.
(Stub_table::do_write): Separate loop for ELFv2 stubs, handling
notoc calls. Simplify ELFv1 loop. Output notoc branch stubs.
Use build_tls_opt_head and build_tls_opt_tail.
(Target_powerpc::Scan::get_reference_flags): Handle REL24_NOTOC.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise,
and PLTSEQ_NOTOC and PLTCALL_NOTOC.
(Target_powerpc::Scan::local, global, relocate): Likewise.
When the type of a property is smaller than the CORE_ADDR in which the
property value has been placed, and if the property is signed, then
sign extend the property value from its actual type up to the size of
CORE_ADDR.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_property): Sign extend property
value if its desired type is smaller than a CORE_ADDR and signed.
gdb/testsuite/ChangeLog:
* gdb.fortran/vla-ptype.exp: Print array with negative bounds.
* gdb.fortran/vla-sizeof.exp: Print the size of an array with
negative bounds.
* gdb.fortran/vla-value.exp: Print elements of an array with
negative bounds.
* gdb.fortran/vla.f90: Setup an array with negative bounds for
testing.
This commit is preparation for the next one, with the aim of better
supporting signed dynamic properties on targets where the address size
specified in the DWARF headers is smaller than a CORE_ADDR, for
example debugging an i386 application on x86-64.
Consider this small Fortran program 'bounds.f90':
program test
integer, allocatable :: array (:)
allocate (array (-5:5))
array(3) = 1
end program test
Compiled with 'gfortran -m32 -g3 -O0 -o bounds bounds.f90'. The DWARF
for 'array' looks like this:
<2><97>: Abbrev Number: 10 (DW_TAG_variable)
<98> DW_AT_name : (indirect string, offset: 0x0): array
<9c> DW_AT_decl_file : 1
<9d> DW_AT_decl_line : 2
<9e> DW_AT_type : <0xaf>
<a2> DW_AT_location : 2 byte block: 91 58 (DW_OP_fbreg: -40)
<2><a5>: Abbrev Number: 11 (DW_TAG_lexical_block)
<a6> DW_AT_low_pc : 0x80485c3
<aa> DW_AT_high_pc : 0x8b
<2><ae>: Abbrev Number: 0
<1><af>: Abbrev Number: 12 (DW_TAG_array_type)
<b0> DW_AT_data_location: 2 byte block: 97 6 (DW_OP_push_object_address; DW_OP_deref)
<b3> DW_AT_allocated : 4 byte block: 97 6 30 2e (DW_OP_push_object_address; DW_OP_deref; DW_OP_lit0; DW_OP_ne)
<b8> DW_AT_type : <0x2a>
<2><bc>: Abbrev Number: 13 (DW_TAG_subrange_type)
<bd> DW_AT_lower_bound : 4 byte block: 97 23 10 6 (DW_OP_push_object_address; DW_OP_plus_uconst: 16; DW_OP_deref)
<c2> DW_AT_upper_bound : 4 byte block: 97 23 14 6 (DW_OP_push_object_address; DW_OP_plus_uconst: 20; DW_OP_deref)
<c7> DW_AT_byte_stride : 6 byte block: 97 23 c 6 34 1e (DW_OP_push_object_address; DW_OP_plus_uconst: 12; DW_OP_deref; DW_OP_lit4; DW_OP_mul)
<2><ce>: Abbrev Number: 0
If we look at the DW_AT_lower_bound attribute, which will become a
dynamic property that GDB evaluates when needed by calling
dwarf2_evaluate_property.
The process of evaluating a dynamic property requires GDB to execute
each DW_OP_* operation, the results of these operations is held on a
stack of 'struct value *'s.
When the entire expression is evaluated the result is on top of the
stack.
If we look at DW_AT_lower_bound then the last operation is
DW_OP_deref, this loads a signed address the size of which matches the
DWARF address size, and so in our i386 on x86-64 situation, the top of
the stack will be a signed 4-byte value.
The problem is how these values are fetched from the stack. Currently
they are always fetched by a call to dwarf_expr_context::fetch_address,
which converts the value to an unsigned value with a length matching
the values current length, before converting to a CORE_ADDR. This
means we loose the signed nature of the property.
I wonder if the best solution for dealing with signed properties will
be to move away from an over reliance on fetch_address, and instead
come up with a new solution that considers the current type of the
value on the stack, and the type that the value needs to become;
basically a solution built around casting rather than assuming we
always want an address.
However, before we can start to even think about moving away from
fetch_address, there is a more urgent issue to fix, which is we don't
currently know what type each property should be. We just hold the
value of the property in a CORE_ADDR as returned by fetch_address, and
rely on higher level code (outside of the DWARF expression evaluation
code) to fix things up for us. This is what this patch aims to
address.
When creating a dynamic property (see attr_to_dynamic_prop in
dwarf2read.c) we can sometimes figure out the type of a property; if
the property is a reference to another DIE then it will have a
DW_AT_type attribute.
However, the DW_AT_lower_bound case above isn't a reference to another
DIE, it's just a DWARF expression. We don't have any indication for
what type the property should have.
Luckily, the DWARF spec helps us out, for the lower and upper bounds
5.13 of the DWARFv5 spec tells us that without any other type
information the bounds are signed integers the same size as a DWARF
address.
It is my belief that we can find a suitable default type for every
dynamic property, either specified explicitly in the DWARF spec, or we
can infer an obvious choice if the spec doesn't help us.
This commit extends the creation of all dynamic properties to include
suggesting a suitable default type, all dynamic properties now always
carry their type around with them.
In later commits we can use this property type to ensure that the
value we extract from the DWARF stack is handled in a suitable manor
to correctly maintain its sign extension.
There should be no user visible changes from this commit. The actual
fix to correctly support negative array bounds will come later.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_property): Update to take account
of changes to field names, and use new is_reference field to
decide if a property is a reference or not.
* dwarf2loc.h (struct dwarf2_locexpr_baton): Add 'is_reference'
field.
(struct dwarf2_property_baton): Update header comment, rename
'referenced_type' to 'property_type' and update comments.
* dwarf2read.c (attr_to_dynamic_prop): Add extra parameter to hold
default property type, store in property baton, update to take
accound of renamed field.
(read_func_scope): Update call to attr_to_dynamic_prop.
(read_array_type): Likewise.
(dwarf2_per_cu_addr_sized_int_type): New function.
(read_subrange_index_type): Move type finding code to
dwarf2_per_cu_addr_sized_int_type.
(read_subrange_type): Update calls to attr_to_dynamic_prop.
(dwarf2_per_cu_addr_type): New function.
(set_die_type): Update calls to attr_to_dynamic_prop.
If a DW_TAG_subrange_type DWARF entry has no DW_AT_type then a default
type based on the size of an address on the current target is assumed.
We store this type as the target type for GDB's range types.
Currently GDB can create ranges for which the target type is VOID,
this is incorrect but seems to cause no problems. I believe the reason
this doesn't cause any issues is because the languages (for example
Ada) that actually make use of a ranges target type also have
compilers that generate DWARF that includes a DW_AT_type attribute.
However, gfortran does not include a DW_AT_type, its DWARF instead
relies on the default target type. This isn't currently a problem for
GDB as gfortran doesn't make use of the target type when printing
subranges, but it shouldn't hurt to fix this issue now.
I've added an assert into create_range_type that will catch this issue
if it comes up again.
This was tested on an x86-64/GNU-Linux machine with both the Ada and
gfortran compilers available with both '--target_board=unix' and
'--target_board=unix/-m32'. There are no user visible changes after
this commit.
gdb/ChangeLog:
* dwarf2read.c (read_subrange_index_type): New function.
(read_subrange_type): Move code into new function and call it.
* gdbtypes.c (create_range_type): Add some asserts.
Convert dwarf2_evaluate_property to return a bool, there should be no
user visible change after this commit.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_evaluate_property): Change return type, and
update return statements.
* dwarf2loc.h (dwarf2_evaluate_property): Update return type on
declaration, and update comment to match.
* gdbtypes.c (resolve_dynamic_array): Update call to
dwarf2_evaluate_property to match new return type.
The dynamic lower (and upper) bounds of ranges are stored as type
LONGEST (see union dynamic_prop_data in gdbtypes.h). In most places
that range bounds are handled they are held in a LONGEST, however in
value_subscripted_rvalue the bound is placed into an int.
This commit changes value_subscripted_rvalue to use LONGEST, there
should be no user visible changes after this commit.
gdb/ChangeLog:
* valarith.c (value_subscripted_rvalue): Change lowerbound
parameter type from int to LONGEST.
* value.h (value_subscripted_rvalue): Likewise in declaration.
When:
- building trunk gdb with '-fsanitize=address -lasan',
- running gdb tests with "export ASAN_OPTIONS=detect_leaks=0",
I run into a heap-buffer-overflow failure for
gdb.base/utf8-identifiers.exp.
In more detail, the libasan error report looks like this:
...
=================================================================
==22340==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x619000054a80 at pc 0x7fcd0306b4c9 bp 0x7fffb1a8d880 sp 0x7fffb1a8d030
READ of size 32766 at 0x619000054a80 thread T0
#0 0x7fcd0306b4c8 (/usr/lib64/libasan.so.4+0xae4c8)
#1 0x15f12a1 in update_line
/data/gdb_versions/devel/src/readline/display.c:1377
#2 0x15f03cb in rl_redisplay
/data/gdb_versions/devel/src/readline/display.c:1204
#3 0x15bf932 in readline_internal_setup
/data/gdb_versions/devel/src/readline/readline.c:394
#4 0x15fe723 in _rl_callback_newline
/data/gdb_versions/devel/src/readline/callback.c:89
#5 0x15fe7ef in rl_callback_handler_install
/data/gdb_versions/devel/src/readline/callback.c:102
#6 0xd7bce6 in gdb_rl_callback_handler_install(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:319
#7 0xd7c0c6 in display_gdb_prompt(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:409
#8 0xd7d6c1 in command_line_handler(std::unique_ptr<char,
gdb::xfree_deleter<char> >&&)
/data/gdb_versions/devel/src/gdb/event-top.c:776
#9 0xd7b92a in gdb_rl_callback_handler
/data/gdb_versions/devel/src/gdb/event-top.c:217
#10 0x15ff479 in rl_callback_read_char
/data/gdb_versions/devel/src/readline/callback.c:220
#11 0xd7b4d5 in gdb_rl_callback_read_char_wrapper_noexcept
/data/gdb_versions/devel/src/gdb/event-top.c:175
#12 0xd7b6b5 in gdb_rl_callback_read_char_wrapper
/data/gdb_versions/devel/src/gdb/event-top.c:192
#13 0xd7c8aa in stdin_event_handler(int, void*)
/data/gdb_versions/devel/src/gdb/event-top.c:514
#14 0xd76ca7 in handle_file_event
/data/gdb_versions/devel/src/gdb/event-loop.c:731
#15 0xd7751f in gdb_wait_for_event
/data/gdb_versions/devel/src/gdb/event-loop.c:857
#16 0xd7547e in gdb_do_one_event()
/data/gdb_versions/devel/src/gdb/event-loop.c:321
#17 0xd75526 in start_event_loop()
/data/gdb_versions/devel/src/gdb/event-loop.c:370
#18 0x101b04c in captured_command_loop
/data/gdb_versions/devel/src/gdb/main.c:331
#19 0x101de73 in captured_main
/data/gdb_versions/devel/src/gdb/main.c:1173
#20 0x101df03 in gdb_main(captured_main_args*)
/data/gdb_versions/devel/src/gdb/main.c:1188
#21 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32
#22 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
#23 0x872bc9 in _start (/data/gdb_versions/devel/build/gdb/gdb+0x872bc9)
0x619000054a80 is located 0 bytes to the right of 1024-byte region
[0x619000054680,0x619000054a80)
allocated by thread T0 here:
#0 0x7fcd03099510 in malloc (/usr/lib64/libasan.so.4+0xdc510)
#1 0xae0078 in xmalloc
/data/gdb_versions/devel/src/gdb/common/common-utils.c:44
#2 0x15eaccb in init_line_structures
/data/gdb_versions/devel/src/readline/display.c:458
#3 0x15eb4d8 in rl_redisplay
/data/gdb_versions/devel/src/readline/display.c:526
#4 0x15bf932 in readline_internal_setup
/data/gdb_versions/devel/src/readline/readline.c:394
#5 0x15fe723 in _rl_callback_newline
/data/gdb_versions/devel/src/readline/callback.c:89
#6 0x15fe7ef in rl_callback_handler_install
/data/gdb_versions/devel/src/readline/callback.c:102
#7 0xd7bce6 in gdb_rl_callback_handler_install(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:319
#8 0xd7c0c6 in display_gdb_prompt(char const*)
/data/gdb_versions/devel/src/gdb/event-top.c:409
#9 0xaa041b in cli_interp_base::pre_command_loop()
/data/gdb_versions/devel/src/gdb/cli/cli-interp.c:286
#10 0xf5342a in interp_pre_command_loop(interp*)
/data/gdb_versions/devel/src/gdb/interps.c:320
#11 0x101b047 in captured_command_loop
/data/gdb_versions/devel/src/gdb/main.c:328
#12 0x101de73 in captured_main
/data/gdb_versions/devel/src/gdb/main.c:1173
#13 0x101df03 in gdb_main(captured_main_args*)
/data/gdb_versions/devel/src/gdb/main.c:1188
#14 0x872dba in main /data/gdb_versions/devel/src/gdb/gdb.c:32
#15 0x7fcd00f2ff49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
SUMMARY: AddressSanitizer: heap-buffer-overflow
(/usr/lib64/libasan.so.4+0xae4c8)
Shadow bytes around the buggy address:
0x0c3280002900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3280002950:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280002960: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280002970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280002990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c32800029a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==22340==ABORTING
...
I've written an assert in rl_redisplay that formulates the error condition:
...
@@ -1387,6 +1389,10 @@ rl_redisplay (void)
cpos_adjusted = 0;
+ assert (last_lmargin + (_rl_screenwidth + visible_wrap_offset)
+ <= line_size);
+ assert (lmargin + (_rl_screenwidth + (lmargin ? 0 : wrap_offset))
+ <= line_size);
update_line (&visible_line[last_lmargin],
&invisible_line[lmargin],
0,
_rl_screenwidth + visible_wrap_offset,
_rl_screenwidth + (lmargin ? 0 : wrap_offset),
0);
...
which triggers without needing the address sanitizer (or even an executable),
like this:
...
$ TERM=dumb gdb -q -ex "set width 0"
gdb: src/display.c:1393: rl_redisplay: Assertion
`last_lmargin + (_rl_screenwidth + visible_wrap_offset) <= line_size'
failed.
Aborted (core dumped)
...
The basic problem is this: visible_line and invisible_line have length
line_size, but the update_line call assumes that line_size is at least
_rl_screenwidth + 1. Executing "set width 0" sets _rl_screenwidth to 32766 but
doesn't affect line_size, which is initialized to 1024.
Fix this by ensuring in init_line_structures and rl_redisplay that line_size
is at least _rl_screenwidth + 1.
Tested on x86_64-linux.
Reviewed by readline maintainer (
https://sourceware.org/ml/gdb-patches/2019-05/msg00566.html ).
readline/ChangeLog.gdb:
2019-07-12 Tom de Vries <tdevries@suse.de>
Chet Ramey <chet.ramey@case.edu>
PR cli/24514
* readline/display.c (init_line_structures, rl_redisplay): Ensure
line_size is at least _rl_screenwidth + 1.
Add command completion for info variables, functions, args, and
locals. This completer only completes the command line options as
these commands all take a regexp which GDB can't really offer
completions for.
gdb/ChangeLog:
* cli/cli-utils.c (info_print_command_completer): New function.
* cli/cli-utils.h: Add 'completer.h' include, and forward
declaration for 'struct cmd_list_element'.
(info_print_command_completer): Declare.
* stack.c (_initialize_stack): Add completer for 'info locals' and
'info args'.
* symtab.c (_initialize_symtab): Add completer for 'info
variables' and 'info functions'.
* NEWS: Mention completion for additional info commands.
Update the 'info variables', 'info functions', 'info locals', and
'info args' commands to make use of the gdb::options framework.
There should be no user visible changes after this commit as I have
left the help text generation using the existing mechanism, which
already tries to customise the text for each of the commands.
gdb/ChangeLog:
* cli/cli-utils.c (extract_info_print_args): Delete.
(extract_arg_maybe_quoted): Delete.
(info_print_options_defs): New variable.
(make_info_print_options_def_group): New function.
(extract_info_print_options): Define new function.
* cli/cli-utils.h (extract_info_print_args): Delete.
(struct info_print_options): New structure.
(extract_info_print_options): Declare new function.
* stack.c (info_locals_command): Update to use new
extract_info_print_options, also add a header comment.
(info_args_command): Likewise.
* symtab.c (info_variables_command): Likewise.
(info_functions_command): Likewise.
Currently string options must be a single string with no whitespace,
this limitation prevents the gdb::option framework being used in some
places.
After this commit, string options can be quoted in single or double
quotes, and quote characters can be escaped with a backslash if needed
to either place them within quotes, or to avoid starting a quoted
argument.
This test adds a new function extract_string_maybe_quoted which is
basically a copy of extract_arg_maybe_quoted from cli/cli-utils.c,
however, the cli-utils.c function will be deleted in the next commit.
There are tests to exercise the new quoting mechanism.
gdb/ChangeLog:
* cli/cli-option.c (parse_option): Use extract_string_maybe_quoted
to extract string arguments.
* common/common-utils.c (extract_string_maybe_quoted): New function.
* common/common-utils.h (extract_string_maybe_quoted): Declare.
gdb/testsuite/ChangeLog:
* gdb.base/options.exp (expect_string): Dequote strings in
results.
(test-string): Test strings with different quoting and reindent.
I noticed that init_cli_cmds only installs a command, and so doesn't
need to be handled specially. This patch merges it into
_initialize_cli_cmds.
The help text is constructed dynamically, which is sometimes an
indication that special treatment is needed; but in this case it is
just to insert the value of "gdbinit", which is created at
compile-time and not modified; so this doesn't affect the result.
This version also removes the "gdbinit" global. There's no need for
it, as GDBINIT can be used instead. Note, though, that the help text
in question must still be dynamically constructed, in order to be
i18n-friendly.
gdb/ChangeLog
2019-07-11 Tom Tromey <tromey@adacore.com>
* main.c (get_init_files): Use GDBINIT, not gdbinit.
* auto-load.c (file_is_auto_load_safe): Use GDBINIT, not gdbinit.
* top.h (gdbinit): Don't declare.
* cli/cli-cmds.c (init_cli_cmds): Remove, merging contents
into...
(_initialize_cli_cmds): ...here. Use GDBINIT, not gdbinit.
* top.c (gdb_init): Don't call init_cli_cmds.
(gdbinit): Remove.
* cli/cli-cmds.h (init_cli_cmds): Don't declare.
commit 05b08ac160 ("Reduce manual reference counting in
py-inferior.c") introduced a use-after-move bug in add_thread_object,
causing a test suite failure. This patch fixes the bug.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-07-11 Tom Tromey <tromey@adacore.com>
* python/py-inferior.c (add_thread_object): Don't use thread_obj
after it has been moved.
... and move comment to header file.
gdb/ChangeLog:
* valops.c (value_must_coerce_to_target): Change return type to
bool.
* value.h (value_must_coerce_to_target): Likewise.
This includes changing the FILTER parameters of two functions
accordingly. I also tried to normalize the function comments to our
current standards.
gdb/ChangeLog:
* breakpoint.c (is_hardware_watchpoint): Remove
forward-declaration.
(is_masked_watchpoint): Change return type to bool.
(is_tracepoint): Likewise.
(is_breakpoint): Likewise.
(is_hardware_watchpoint): Likewise.
(is_watchpoint): Likewise.
(is_no_memory_software_watchpoint): Likewise.
(is_catchpoint): Likewise.
(breakpoint_1): Make FILTER parameter's return type bool.
is_masked_watchpoint): Change return type to bool.
(save_breakpoints): Make FILTER parameter's return type bool.
* breakpoint.h (is_breakpoint): Change return type to bool.
(is_watchpoint): Likewise.
(is_catchpoint): Likewise.
(is_tracepoint): Likewise.
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
This changes arm-tdep.c to use the type-safe registry, removing a use
of VEC in the process.
2019-07-10 Tom Tromey <tromey@adacore.com>
* arm-tdep.c (arm_exidx_entry_s): Remove typedef. Don't define
VEC.
(struct arm_exidx_entry): New method operator<.
(struct arm_exidx_data) <section_maps>: Change type.
(arm_exidx_data_free): Remove.
(arm_exidx_data_key): Change type. Move lower.
(arm_exidx_new_objfile): Update.
(arm_compare_exidx_entries): Remove.
(arm_find_exidx_entry, _initialize_arm_tdep)
