The Nios II architecture has been EOL'ed by the vendor. This patch
removes all binutils, bfd, gas, binutils, and opcodes support for this
target with the exception of the readelf utility. (The ELF EM_*
number remains valid and the relocation definitions from the Nios II
ABI will never change in future, so retaining the readelf support
seems consistent with its purpose as a utility that tries to parse the
headers in any ELF file provided as an argument regardless of target.)
Both ELF and COFF have various sub-flavors, each of which would then
require its own emulation: Right now when configuring a COFF/PE
secondary target (with perhaps an ELF primary one), one gets plain COFF
emulation rather than COFF/PE one.
As such a multitude of emulations would be unwieldy (and likely fragile)
drop gas emulations altogether instead.
This patch supports Zcmp instruction 'cm.mva01s' and 'cm.mvsa01'.
All disassemble instructions use the sreg format.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
gas/ChangeLog:
PR 32036
* NEWS: Updated.
* config/tc-riscv.c (validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/zcmp-mv.d: New test.
* testsuite/gas/riscv/zcmp-mv.s: New test.
include/ChangeLog:
PR 32036
* opcode/riscv-opc.h (MATCH_CM_MVA01S): New opcode.
(MASK_CM_MVA01S): New mask.
(MATCH_CM_MVSA01): New opcode.
(MASK_CM_MVSA01): New mask.
(DECLARE_INSN): New declarations.
* opcode/riscv.h (OP_MASK_SREG1): New mask.
(OP_SH_SREG1): New operand code.
(OP_MASK_SREG2): New mask.
(OP_SH_SREG2): New operand code.
(X_A0): New reg number.
(X_A1): Ditto.
(X_S7): Ditto.
(RISCV_SREG_0_7): New macro function.
opcodes/ChangeLog:
PR 32036
* riscv-dis.c (riscv_zcmp_get_sregno): New function.
(print_insn_args): New operators.
* riscv-opc.c (match_sreg1_not_eq_sreg2): New match function.
According to the description of the state machine, the expectation
appears to be that (leaving aside labels) any insn mnemonic or
directive would be followed by a comma separated list of operands. That
may have been true very long ago, but the latest with the advent of more
elaborate macros this isn't rhe case anymore. Neither macro parameters
in macro definitions nor macro arguments in macro invocations are
required to be separated by commas. Hence whitespace serves a crucial
role there. Plus even without "real" macros issues exist, in e.g.
.irp n, ...
insn\n\(suffix) operand1, operand2
.endr
Whitespace following the closing parenthesis would have been removed
(ahead of even processing the .irp), as the "opcode" was deemed to have
ended earlier already.
Therefore, squash the distinction between "opcode" and operands, i.e.
fold state 10 back into state 3. Also drop most of the distinction
between "symbol chars" and "relatively normal" ones. Not entirely
unexpectedly this results in the need to skip whitespace in a few more
places in arch-specific code (and quite likely more changes are needed
for insn forms not covered by the testsuite).
As a result the D10V special case is no longer necessary.
In config/tc-sparc.c also move a comment to be next to the code being
commented.
In opcodes/cgen-asm.in some further cleanup is done, following the local
var adjustments.
We have an ISA check for the '--trap' command-line option that reports
its incompatibility with the MIPS I architecture. It doesn't prevent
trap instructions from being enabled though, so when attempt is made to
emit one in an expansion of one of the division or multiplication macros
an assertion failure triggers:
.../gas/testsuite/gas/mips/brtr-opt.s: Assembler messages:
.../gas/testsuite/gas/mips/brtr-opt.s:3: Error: trap exception not supported at ISA 1
.../gas/testsuite/gas/mips/brtr-opt.s:9: Warning: divide by zero
.../gas/testsuite/gas/mips/brtr-opt.s:9: Internal error in macro_build at .../gas/config/tc-mips.c:9064.
Please report this bug.
The same assertion failure triggers without an earlier error message
when the initial ISA is compatible with the '--trap', however at the
time an attempt is made to emit a trap instruction from a division or
multiplication macro the ISA has been changed by a '.set' pseudo-op to
an incompatible one.
With the way the situations are mishandled it seems unlikely that anyone
relies on the current semantics and a sane approach is to decide on the
fly according to the currently selected ISA as to whether to emit trap
or breakpoint instructions in the case where '--trap' has been used.
Change our code to do so then and clarify that in the manual, which is
not explicit about how '--trap' is handled with a changing ISA. Mention
the change in NEWS too since it's a applies to a user option.
The new -march=armv9.5-a flag enables access to the
mandatory cpa, lut and faminmax extensions.
Existing test cases for features are extended to verify they
work without additional flags.
Introduces instructions for the SME2 lutv2 extension for AArch64. They
are documented in the following document:
* ARM DDI0602
For both luti4 instructions, we introduced an operand called
SME_Znx2_BIT_INDEX. We use the existing function parse_vector_reg_list
for parsing but modified that function so that it can accept operands
without qualifiers and rejects instructions that have operands with
qualifiers but are not supposed to have operands with qualifiers.
For disassembly, we modified print_register_list so that it could
accept register lists without qualifiers.
For one luti4 instruction, we introduced a SME_Zdnx4_STRIDED. It is
similar to SME_Ztx4_STRIDED and we could use existing code for parsing,
encoding, and disassembly.
For movt instruction, we introduced an operand called SME_ZT0_INDEX2_12.
This is a ZT0 register with a bit index encoded in [13:12]. It is
similar to SME_ZT0_INDEX.
We also introduced an iclass named sme_size_12_b so that we can encode
size bits [13:12] correctly when only 'b' is allowed as qualifier.
PR gas/31752
While not quite as macro-like as .irp / .irpc, this perhaps benefits from
supporting \+ even more than those: It allows, where desired, to get away
without maintaining an explicit count variable in source code.
Keep .rep (and custom per-arch uses of s_rept() / do_repeat()) behavior
unaltered.
This implements the Zvfbfwma extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zvfbfwma---vector-bf16-widening-mul-add>
1 In spec: "Zvfbfwma requires the Zvfbfmin extension and the Zfbfmin extension."
1.1 In Embedded Processor: Zvfbfwma -> Zvfbfmin -> Zve32f
1.2 In Application Processor: Zvfbfwma -> Zvfbfmin -> V
1.3 In both scenarios, there are: Zvfbfwma -> Zfbfmin
2 Depending on different usage scenarios, the Zvfbfwma extension may
depend on 'V' or 'Zve32f'. This patch only implements dependencies in
scenario of Embedded Processor. This is consistent with the processing
strategy in Zvfbfmin. In scenario of Application Processor, it is
necessary to explicitly indicate the dependent 'V' extension.
For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=38dd4e26e07c6be7cf4d169141ee4f3a03f3a09d>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zvfbfwma.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zvfbfwma.d: New test.
* testsuite/gas/riscv/zvfbfwma.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VFWMACCBF16_VF): Define.
(MASK_VFWMACCBF16_VF): Ditto.
(MATCH_VFWMACCBF16_VV): Ditto.
(MASK_VFWMACCBF16_VV): Ditto.
(DECLARE_INSN): New declarations for Zvfbfwma.
* opcode/riscv.h (enum riscv_insn_class): Add
INSN_CLASS_ZVFBFWMA
opcodes/ChangeLog:
* riscv-opc.c: Add Zvfbfwma instructions.
This implements the Zvfbfmin extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zvfbfmin---vector-bf16-converts>
Depending on different usage scenarios, the Zvfbfmin extension may
depend on 'V' or 'Zve32f'. This patch only implements dependencies
in scenario of Embedded Processor. In scenario of Application
Processor, it is necessary to explicitly indicate the dependent
'V' extension.
For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=1ddf65c5fc6ba7cf5826e1c02c569c923a541c09>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zvfbfmin.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zvfbfmin.d: New test.
* testsuite/gas/riscv/zvfbfmin.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VFNCVTBF16_F_F_W): Define.
(MASK_VFNCVTBF16_F_F_W): Ditto.
(MATCH_VFWCVTBF16_F_F_V): Ditto.
(MASK_VFWCVTBF16_F_F_V): Ditto.
(DECLARE_INSN): New declarations for Zvfbfmin.
* opcode/riscv.h (enum riscv_insn_class): Add
INSN_CLASS_ZVFBFMIN
opcodes/ChangeLog:
* riscv-opc.c: Add Zvfbfmin instructions.
This implements the Zfbfmin extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zfbfmin---scalar-bf16-converts>
1 The Zfbfmin extension depend on 'F', and the FLH, FSH, FMV.X.H, and
FMV.H.X instructions as defined in the Zfh extension.
2 The Zfhmin extension includes the following instructions from the Zfh
extension: FLH, FSH, FMV.X.H, FMV.H.X... View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/zfh.adoc>
3 Zfhmin extension depend on 'F'.
4 Simply put, just make Zfbfmin dependent on Zfhmin.
Perhaps in the future, we could propose making the FLH, FSH, FMV.X.H, and
FMV.H.X instructions an independent extension to achieve precise dependency
relationships for the Zfbfmin.
5 For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=35224ead63732a3550ba4b1332c06e9dc7999c31>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zfbfmin.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zfbfmin.d: New test.
* testsuite/gas/riscv/zfbfmin.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_FCVT_BF16_S): Define.
(MASK_FCVT_BF16_S): Ditto.
(MATCH_FCVT_S_BF16): Ditto.
(MASK_FCVT_S_BF16): Ditto.
(DECLARE_INSN): New declarations for Zfbfmin.
* opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_ZFBFMIN.
opcodes/ChangeLog:
* riscv-opc.c: Add Zfbfmin instructions.
Except for very few insns mnemonic suffixes aren't permitted in Intel
syntax. Warn about such for now, indicating that they will be outright
refused down the road.
While fiddling with testcases to address fallout, drop a few things
which should never have been tested as valid Intel syntax.
Also add a previously missing line to simd-suffix.d.
Introduces instructions for the Advanced SIMD lut extension for AArch64. They are documented in the following links:
* luti2: https://developer.arm.com/documentation/ddi0602/2024-03/SIMD-FP-Instructions/LUTI2--Lookup-table-read-with-2-bit-indices-?lang=en
* luti4: https://developer.arm.com/documentation/ddi0602/2024-03/SIMD-FP-Instructions/LUTI4--Lookup-table-read-with-4-bit-indices-?lang=en
These instructions needed definition of some new operands. We will first
discuss operands for the third operand of the instructions and then
discuss a vector register list operand needed for the second operand.
The third operands are vectors with bit indices and without type
qualifiers. They are called Em_INDEX1_14, Em_INDEX2_13, and Em_INDEX3_12
and they have 1 bit, 2 bit, and 3 bit indices respectively. For these
new operands, we defined new parsing case branch. The lsb and width of
these operands are the same as many existing but the convention is to
give different names to fields that serve different purpose so we
introduced new fields in aarch64-opc.c and aarch64-opc.h for these new
operands.
For the second operand of these instructions, we introduced a new
operand called LVn_LUT. This represents a vector register list with
stride 1. We defined new inserter and extractor for this new operand and
it is encoded in FLD_Rn. We are enforcing the number of registers in the
reglist using opcode flag rather than operand flag as this is what other
SIMD vector register list operands are doing. The disassembly also uses
opcode flag to print the correct number of registers.
PR gas/31752
These are effectively macro-like, without any separate macro definition.
They already support \@, so they would better also support \+. This
allows, where desired, to get away without maintaining an explicit count
variable in source code.
With this the recently introduced testcase doesn't need any xfails
anymore.
Support zcmp extension push/pop/popret and popret zero instructions.
The `reg_list' is a list containing 1 to 13 registers, we can use:
"{ra}, {ra, s0}, {ra, s0-s1}, {ra, s0-s2} ... {ra, s0-sN}"
to present this feature.
Passed gcc/binutils regressions of riscv-gnu-toolchain.
Most of work was finished by Sinan Lin.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subset): Imply zca for zcmp.
(riscv_supported_std_z_ext): Added zcmp with version 1.0.
(riscv_parse_check_conflicts): Zcmp conflicts with d/zcd.
(riscv_multi_subset_supports): Handle zcmp.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* config/tc-riscv.c (regno_to_reg_list): New function, used to map
register to reg_list number.
(reglist_lookup): Called reglist_lookup_internal. Return false if
reg_list number is zero, which is an invalid value.
(reglist_lookup_internal): Parse register list, and return the last
register by regno_to_reg_list.
(validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/march-help.l: Updated.
* testsuite/gas/riscv/zcmp-push-pop-fail.d: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.l: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.s: New test.
* testsuite/gas/riscv/zcmp-push-pop.d: New test.
* testsuite/gas/riscv/zcmp-push-pop.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH/MASK_CM_PUSH): New macros for zcmp.
(MATCH/MASK_CM_POP): Ditto.
(MATCH/MASK_CM_POPRET): Ditto.
(MATCH/MASK_CM_POPRETZ): Ditto.
(DECLARE_INSN): New declarations for zcmp.
* opcode/riscv.h (EXTRACT/ENCODE/VALID_ZCMP_SPIMM): Handle spimm
operand for zcmp.
(OP_MASK_REG_LIST): Handle operand for zcmp register list.
(OP_SH_REG_LIST): Ditto.
(ZCMP_SP_ALIGNMENT): New argument, used in riscv_get_sp_base.
(X_S0, X_S1, X_S2, X_S10, X_S11): New register numbers.
(enum riscv_insn_class): Added INSN_CLASS_ZCMP.
(extern riscv_get_sp_base): Added.
opcodes/ChangeLog:
* riscv-dis.c (print_reg_list): New function, used to get zcmp
reg_list field.
(riscv_get_spimm): New function, used to get zcmp sp adjustment
immediate.
(print_insn_args): Handle new operands for zcmp.
* riscv-opc.c (riscv_get_sp_base): New function, used by gas and
objdump. Get sp base adjustment.
(riscv_opcodes): Added zcmp instructions.
For the case when NDD and NF are both 0 in evex-promoted format,
we will fully support and test it in another patch.
gas/ChangeLog:
* NEWS: Support Intel APX NF.
* config/tc-i386.c (enum i386_error): Add unsupported_nf.
(struct _i386_insn): Add has_nf.
(is_apx_evex_encoding): Ditto.
(build_apx_evex_prefix): Encode the NF bit.
(md_assemble): Handle unsupported_nf.
(parse_insn): Handle Prefix_NF and report bad for illegal combination.
(can_convert_NDD_to_legacy): Replace i.tm.opcode_modifier.nf with i.has_nf.
(match_template): Support D for APX_F insns and check NF support.
* testsuite/gas/i386/x86-64-apx-evex-promoted-bad.d: Add bad test for NF bit.
* testsuite/gas/i386/x86-64-apx-evex-promoted-bad.s: Ditto.
* testsuite/gas/i386/x86-64-apx-inval.l: Ditto.
* testsuite/gas/i386/x86-64-apx-inval.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Add apx nf tests.
* testsuite/gas/i386/x86-64-apx-nf-intel.d: New test.
* testsuite/gas/i386/x86-64-apx-nf.d: Ditto.
* testsuite/gas/i386/x86-64-apx-nf.s: Ditto.
opcodes/ChangeLog:
* i386-dis-evex.h: Add %NF to the instructions that support APX NF and
add new instruction imul, popcnt, tzcnt and lzcnt to EVEX table.
* i386-dis-evex-reg.h: Ditto.
* i386-dis.c (struct instr_info): Add nf.
(struct dis386): Add "NF" for EVEX.NF.
(get_valid_dis386): Set ins->vex.nf and report bad-nf for illegal case.
(print_insn): Handle ins.vex.nf.
(putop): Handle "%NF".
* i386-opc.h (Prefix_NF): New.
* i386-opc.tbl: Added new entries to support full APX NF instructions.
* i386-mnem.h: Regenerated.
* i386-tbl.h: Regenerated.
I don't view it as sensible to be more lax when it comes to references
to (uses of) such labels compared to their definition: The latter has
been limited to decimal numerics, while the former permitted any radix.
Beyond that leading zeroes on such labels aren't helpful either. Imo
labels and their use sites would better match literally, to avoid
confusion.
As it turns out, one z80 testcase actually had such an odd use of labels
where definition and use don't match in spelling. That testcase is being
adjusted accordingly.
While there also adjust a comment on a local variable in
integer_constant().
The base register operand B may be omitted in D(B) by coding D and in
D(L,B) by coding D(L). The index register operand X may be omitted in
D(X,B) by coding D(B) or explicitly omitted by coding D(,B). In both
cases the omitted base register operand value defaults to zero.
Allow to explicitly omit the base register operand B in D(X,B) and
D(L,B) by coding D(X,) and D(L,). Default the omitted base register
operand value to zero.
gas/
* config/tc-s390.c: Allow to explicitly omit the base register
operand in assembly.
* NEWS: Mention that the base register now may be omitted on
s390.
* gas/testsuite/gas/s390/zarch-base-index-0.s: Update test cases
for change to allow to explicitly omit the base register
operand in assembly.
* gas/testsuite/gas/s390/zarch-base-index-0.d: Likewise.
* gas/testsuite/gas/s390/zarch-base-index-0-err.s: Likewise.
* gas/testsuite/gas/s390/zarch-base-index-0-err.l: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index.s: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index.d: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.l:
Likewise.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Print a warning message when the register type of a specified register
name does not match with the operand's register type:
operand {#}: expected {access|control|floating-point|general|vector}
register name [as {base|index} register]
Introduce a s390-specific assembler option "warn-regtype-mismatch"
with the values "strict", "relaxed", and "no" as well as an option
"no-warn-regtype-mismatch" which control whether the assembler
performs register name type checks and generates above warning messages.
warn-regtype-mismatch=strict:
Perform strict register name type checks.
warn-regtype-mismatch=relaxed:
Perform relaxed register name type checks, which allow floating-point
register (FPR) names %f0 to %f15 to be specified as argument to vector
register (VR) operands and vector register (VR) names %v0 to %v15 to
be specified as argument to floating-point register (FPR) operands.
This is acceptable as the FPRs are embedded into the lower halves of
the VRs. Make "relaxed" the default, as GCC generates assembler code
using FPR and VR interchangeably, which would cause assembler warnings
to be generated with "strict".
warn-regtype-mismatch=no:
no-warn-regtype-mismatch:
Disable any register name type checks.
Tag .insn pseudo mnemonics as such, to skip register name type checks
on those. They need to be skipped, as there do not exist .insn pseudo
mnemonics for every possible operand register type combination. Keep
track of the currently parsed operand number to provide it as reference
in warning messages.
To verify that the introduction of this change does not unnecessarily
affect the compilation of existing code the GNU Binutils, GNU C Library,
and Linux Kernel have been build with the new assembler, verifying that
the assembler did not generate any of the new warning messages.
gas/
* config/tc-s390.c: Handle new assembler options
"[no]warn-regtype-mismatch[=strict|relaxed|no". Annotate
parsed register expressions with register type. Keep track of
operand number being parsed. Print warning message in case of
register type mismatch between instruction operand and parsed
register expression.
* doc/as.texi: Document new s390-specific assembler options
"[no-]warn-regtype-mismatch[=strict|relaxed|no]".
* NEWS: Mention new s390-specific register name type checks and
related assembler option "warn-regtype-mismatch=strict|
relaxed|no".
* testsuite/gas/s390/s390.exp: Add test cases for new assembler
option "warn-regtype-mismatch={strict|relaxed}".
* testsuite/gas/s390/esa-g5.s: Fix register types in tests for
didbr, diebr, tbdr, and tbedr.
* testsuite/gas/s390/zarch-z13.s: Fix register types in tests
for vgef, vgeg, vscef, and vsceg.
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.s:
Tests for assembler option "warn-regtype-mismatch=strict".
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.l:
Likewise.
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.s:
Tests for assembler option "warn-regtype-mismatch=relaxed".
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.l:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s: Update
test cases for assembler option "warn-regtype-mismatch"
defaulting to "relaxed".
* testsuite/gas/s390/zarch-omitted-base-index-err.l: Likewise.
include/
* opcode/s390.h (S390_INSTR_FLAG_PSEUDO_MNEMONIC): Add
instruction flag to tag .insn pseudo-mnemonics.
opcodes/
* s390-opc.c (s390_opformats): Tag .insn pseudo-mnemonics as
such.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
... plus the SME part of B16B16. As per
https://sourceware.org/pipermail/binutils/2024-February/132408.html
SVE2.1 support is both incomplete and buggy. SME2.1 "support" goes as
far as a single instruction (a subset of movaz forms) only. The SME part
of B16B16 is entirely missing.
Hi,
This patch add support for FEAT_SVE2p1 (SVE2.1 Extension) feature
along with +sve2p1 optional flag to enabe this feature.
Also support for following SVE2p1 instructions is added
addqv, andqv, smaxqv, sminqv, umaxqv, uminqv and uminqv.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SME2p1 and "movaz" instructions
along with the optional flag +sme2p1.
Following "movaz" instructions are add:
Move and zero two ZA tile slices to vector registers.
Move and zero four ZA tile slices to vector registers.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
