T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds permutation instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
permutation instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMVXS): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds mask instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
mask instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VMPOPCM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds reductions instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension
are documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
reductions instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds floating-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
floating-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VFSQRTV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds fixed-point arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
fixed-point arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAADDVV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds integer arithmetic instructions for the
"XTheadVector" extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
integer arithmetic instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VADCVVM): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds the sub-extension "XTheadZvamo" for the
"XTheadVector" extension, and it provides AMO instructions
for T-Head VECTOR vendor extension. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add support
for "XTheadZvamo" extension.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-zvamo.d: New test.
* testsuite/gas/riscv/x-thead-vector-zvamo.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VAMOADDWV): New.
* opcode/riscv.h (enum riscv_insn_class): Add insn class.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore it
makes sense to group them into smaller chunks in form of vendor
extensions.
This patch adds provides load/store segment instructions for T-Head VECTOR
vendor extension, which same as the "Zvlsseg" extension in RVI 0.71 vector
extension, but belongs to the "XTheadVector" extension. The 'th' prefix
and the "XTheadVector" extension are documented in a PR for the
RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add test.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLSEG2BV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions. Therefore
it makes sense to group them into smaller chunks in form of
vendor extensions.
This patch adds load/store instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: Add tests for
load/store instructions.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_TH_VLBV): New.
opcodes/ChangeLog:
* riscv-opc.c: Likewise.
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds configuration-setting instructions for the "XTheadVector"
extension. The 'th' prefix and the "XTheadVector" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* testsuite/gas/riscv/x-thead-vector.d: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
opcodes/ChangeLog:
* riscv-opc.c: Likewise..
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the CSRs for XTheadVector. Because of the
conflict between encoding and teh 'V' extension, it is implemented
by alias. The 'th' prefix and the "XTheadVector" extension are
documented in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (enum riscv_csr_class): Add the class for
the CSRs of the "XTheadVector" extension.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/x-thead-vector-csr-warn.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr-warn.l: New test.
* testsuite/gas/riscv/x-thead-vector-csr.d: New test.
* testsuite/gas/riscv/x-thead-vector-csr.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (DECLARE_CSR_ALIAS): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Prefix the CSRs disassembly with 'th'.
T-Head has a range of vendor-specific instructions ([2]).
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the "XTheadVector" extension, a collection of
T-Head-specific vector instructions. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the RISC-V
toolchain conventions ([1]).
Here are some things that need to be explained:
The "XTheadVector" extension is not a custom-extension, but
a non-standard non-conforming extension. The encoding space
of the "TheadVector" instructions overlaps with those of
the 'V' extension. This encoding space conflict is not on
purpose, but the result of issues in the past that have
been resolved since. Therefore, the "XTheadVector" extension
and the 'V' extension are in conflict.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
[2] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): The
"XTheadVector" extension and the 'V' extension are in conflict.
(riscv_multi_subset_supports): Likewise..
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-fail.d: New test.
* testsuite/gas/riscv/x-thead-vector-fail.l: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class):
This changes parse_bpf_register to detect possible symbols that start with valid
register name, however due some following characters are not.
Also changed the regs-for-symbols-pseudo.s, adding some entries that
should not error if parser is properly detecting the symbol.
2023-11-18 Jose E. Marchesi <jemarch@gnu.org>
* config/tc-bpf.c (parse_bpf_register): Move before
bpf_parse_name.
(bpf_parse_name): Do not allow using symbols that are also
register names as operands in pseudo-c syntax.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.d: New file.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.s: Likewise.
* testsuite/gas/bpf/regs-for-symbols-pseudoc.l: Likewise.
* doc/c-bpf.texi (BPF Registers): Document that it is not possible
to refer to register names as symbols in instruction operands.
To support the "pseudo-C" asm dialect in BPF, the BPF parser must often
attempt multiple different templates for a single instruction. In some
cases this can cause the parser to incorrectly parse part of the
instruction opcode as an expression, which leads to the creation of a
new undefined symbol.
Once the parser recognizes the error, the expression is discarded and it
tries again with a new instruction template. However, symbols created
during the process are added to the symbol table and are not removed
even if the expression is discarded.
This is a problem for BPF: generally the assembled object will be loaded
directly to the Linux kernel, without being linked. These erroneous
parser-created symbols are rejected by the kernel BPF loader, and the
entire object is refused.
This patch remedies the issue by tentatively creating symbols while
parsing instruction operands, and storing them in a temporary list
rather than immediately inserting them into the symbol table. Later,
after the parser is sure that it has correctly parsed the instruction,
those symbols are committed to the real symbol table.
This approach is modeled directly after Jan Beulich's patch for RISC-V:
commit 7a29ee290307087e1749ce610207e93a15d0b78d
RISC-V: adjust logic to avoid register name symbols
Many thanks to Jan for recognizing the problem as similar, and pointing
me to that patch.
gas/
* config/tc-bpf.c (parsing_insn_operands): New.
(parse_expression): Set it here.
(deferred_sym_rootP, deferred_sym_lastP): New.
(orphan_sym_rootP, orphan_sym_lastP): New.
(bpf_parse_name): New.
(parse_error): Clear deferred symbol list on error.
(md_assemble): Clear parsing_insn_operands. Commit deferred
symbols to symbol table on successful parse.
* config/tc-bpf.h (md_parse_name): Define to...
(bpf_parse_name): ...this. New prototype.
* testsuite/gas/bpf/asm-extra-sym-1.s: New test source.
* testsuite/gas/bpf/asm-extra-sym-1.d: New test.
* testsuite/gas/bpf/bpf.exp: Run new test.
PR gas/31043
"unsupported instruction ..." can mean about anything, and can also be
mistaken to mean something that isn't meant. Replace most of its uses by
more specific diagnostics,
While there also take the opportunity and purge the no longer used
invalid_register_operand enumerator.
{disp16} is invalid to use in 64-bit mode, while {disp32} is invalid to
use on pre-386 CPUs. The latter, also affecting other (real) prefixes,
further requires that like for insns we fully check the CPU flags; till
now only Cpu64/CpuNo64 were taken into consideration.
ELF-only functions don't need to be built when dealing with a non-ELF
target. md_section_align() also doesn't need to be a function when
dealing with non-AOUT targets. Similarly tc_fix_adjustable() can be a
simple macro when building non-ELF targets.
Furthermore x86_elf_abi is already used in ELF-only code sections, with
one exception. By adjusting that, the otherwise bogusly named variable
can also be confined to just ELF builds.
Simplify the code follow ing what check_{,q}word_reg() already do. This
the also eliminates a stale comment talking about a warning when an
error is raised. While there, correct a similarly stale comment in
check_qword_reg() while there.
Due to a missing check "crc32q %al, %rax" was wrongly translated to the
encoding of "crc32q %rax, %rax", rather than being rejected as invalid.
(The mnemonic suffix describes the source operand, not the destination
one.)
Note that check_{word,long}_reg() do not (currently) appear to require
similar amending, as there are no insn templates permitting an L or W
suffix and having an operand which allows for Reg8 and Reg64, but
neither Reg16 nor Reg32.
This patch adds the permission model enhancement and memory
attribute index enhancement features and their corresponding
system registers in AArch64 assembler.
Permission Indirection Extension (FEAT_S1PIE, FEAT_S2PIE)
Permission Overlay Extension (FEAT_S1POE, FEAT_S2POE)
Memory Attribute Index Enhancement (FEAT_AIE)
Extension to Translation Control Registers (FEAT_TCR2)
These features are available by default from Armv9.4-A architecture.
This patch also adds support for:
1. FEAT_RASv2 feature and "ERXGSR_EL1" system register.
RASv2 feature is enabled by passing +rasv2 to -march
(eg: -march=armv8-a+rasv2).
2. FEAT_SCTLR2 and following system registers.
SCTLR2_EL1, SCTLR2_EL12, SCTLR2_EL2 and SCTLR2_EL3.
3. FEAT_FGT2 and following system registers.
HDFGRTR2_EL2, HDFGWTR2_EL2, HFGRTR2_EL2, HFGWTR2_EL2
4. FEAT_PFAR and following system registers.
PFAR_EL1, PFAR_EL2 and PFAR_EL12.
FEAT_RASv2, FEAT_SCTLR2, FEAT_FGT2 and FEAT_PFAR features are by default
enabled from Armv9.4-A architecture.
This patch also adds support for two read only system registers
id_aa64mmfr3_el1 and id_aa64mmfr4_el1, which are available from
Armv8-A Architecture.
This patch adds features to the Statistical Profiling Extension,
identified as FEAT_SPEv1p4, FEAT_SPE_FDS, and FEAT_SPE_CRR, which
are enabled by default from Armv9.4-A.
Also adds support for system register "pmsdsfr_el1".
* testsuite/gas/elf/elf.exp (section2): Add -mpdr option to assembler command line for mips-irix targets.
* testsuite/gas/mips/elf-rel26.d: Add -mpdr command line option.
* testsuite/gas/mips/mips16-e.d: Likewise.
* testsuite/gas/mips/mips16-f.d: Likewise.
* testsuite/gas/mips/mips16-hilo-match.d: Likewise.
* testsuite/gas/mips/mips16-e-irix.d: Likewise.
* testsuite/gas/mips/call-nonpic-1.d: Adjust regexp to allow for mips-irix targets.
* testsuite/gas/mips/irix-no-pdr.d: New test file.
* testsuite/gas/mips/mips.exp: Run new test for mips-irix targets.
commit d173146d9 "MIPS: Change all E_MIPS_* to EF_MIPS_*"
changed gas/config.in to rename USE_E_MIPS_ABI_O32 to USE_EF_MIPS_ABI_O32
this new name sorts differently when regenerating gas/config.in
commit e922d1eaa "Add ability to change linker warning messages into
errors when reporting executable stacks and/or executable segments."
Introduced two new help strings for --enable-error-execstack and
--enable-error-rwx-segments in configure.ac which weren't included
in ld/configure when regenerated.
* gas/config.in: Regenerate.
* ld/configure: Likewise.
The erroneous omission of a "reg_value == " in the THE system register
encoding check added in [1] led to an error which was not picked up in
GCC but which was flagged in Clang due to its use of
[-Werror,-Wconstant-logical-operand] check. Together with this fix we
add a new test for the THE registers to pick up their illegal use,
adding an extra and important layer of validation.
Furthermore, in separating system register from instruction
implementation (with which only the former was of concern in the cited
patch), additions made to `aarch64-tbl.h' are rolled back so
that these can be added later when adding THE instructions to the
codebase, a more natural place for these changes.
[1] https://sourceware.org/pipermail/binutils/2023-November/130314.html
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_sys_ins_reg_supported_p): Fix typo.
* aarch64-tbl.h (THE): Remove.
(aarch64_feature_set aarch64_feature_the): Likewise.
gas/ChangeLog:
* testsuite/gas/aarch64/illegal-sysreg-8.l: Add tests for THE
system registers.
* testsuite/gas/aarch64/illegal-sysreg-8.s: Likewise.
As we have grown more uses of it, it becomes increasingly more desirable
to replace it by a simpler check. Have i386-gen do at build time what so
far was done at runtime: Deal with templates indicating EVEX-encoding by
other than the EVex attribute, and set that to "dynamic" in such cases.
This then allows simplifying a number of other conditionals as well.
Right now the opcode table has entries with ISA restrictions of the form
FEAT1|FEAT2, the meaning of which depends on context and requires
special treatment in tc-i386.c: Sometimes this means "both features
requires", whereas originally it was intended to solely mean "all of
these features required". Split the field, with the original one
regaining its original meaning. The new field now truly means "any of
these". The combination of both fields is still and &&-type check, i.e.
(all of these) && (any of these). In the opcode table more involved
combinations of features then also need expressing this way: "all"
entities first, follow by "any" entities enclosed in parentheses, e.g.
x64&(AVX|AVX512F). If the "all" part is empty, parentheses may not be
added around the "any" part (unless parsing logic was further relaxed).
Note that this way AVX512VL no longer needs as much special treatment,
and hence templates previously using AVX512F|AVX512VL are switched to
just AVX512VL.
Note further that this requires FMA handling as resulting from
da0784f961d8 ("x86: fold FMA VEX and EVEX templates") to be slightly
re-done: FMA now becomes more similar to AVX and AVX2.
First of all we want to also accumulate its reverse dependencies, such
that we can use them in cpu_flags_match(). This is in particular in
preparation of APX additions, such that e.g. BMI VEX-encoding templates
can become combined VEX/EVEX ones.
Once we have the reverse dependencies, we can further leverage them to
omit explicit "&x64" from any insn templates dealing with 64-bit-mode-
only ISA extensions. Besides helping readability for several insn
templates we already have, this will also help with what is going to be
added for APX (as all of the new templates would otherwise need to have
"&x64").
Note that rather than leaving a meaningless CPU_64_FLAGS (which is
unused anyway), its emitting is now also suppressed.
Enable the `+lse128' feature modifier which, together with new
internal feature flags, enables LSE128 instructions, which are
represented via the new `_LSE128_INSN' macro.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_features): Add new "lse128"
entry.
include/ChangeLog:
* include/opcode/aarch64.h (enum aarch64_feature_bit): New
AARCH64_FEATURE_LSE128 feature bit.
(enum aarch64_insn_class): New lse128_atomic instruction class.
opcodes/ChangeLog:
* opcodes/aarch64-tbl.h (aarch64_feature_lse128): New.
(LSE128): Likewise.
(_LSE128_INSN): Likewise.
Given the particular encoding of the LSE128 instructions, create the
necessary shared input+output operand register description and
handling in the code to allow for the encoding of the LSE128 128-bit
atomic operations.
gas/ChangeLog:
* config/tc-aarch64.c (parse_operands):
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd):
opcodes/ChangeLog:
* aarch64-opc.c (fields):
(aarch64_print_operand):
* aarch64-opc.h (enum aarch64_field_kind):
* aarch64-tbl.h (AARCH64_OPERANDS):
Add Binutils support for system registers associated with the
Translation Hardening Extension (THE).
In doing so, we also add core feature support for THE, enabling its
associated feature flag and implementing the necessary
feature-checking machinery.
Regression tested on aarch64-linux-gnu, no regressions.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_features): Add "+the" feature modifier.
* doc/c-aarch64.texi (AArch64 Extensions): Update
documentation for `the' option.
* testsuite/gas/aarch64/sysreg-8.s: Add tests for `the'
associated system registers.
* testsuite/gas/aarch64/sysreg-8.d: Likewise.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_feature_bit): Add
AARCH64_FEATURE_THE.
opcode/ChangeLog:
* aarch64-opc.c (aarch64_sys_ins_reg_supported_p): Add `the'
system register check support.
* aarch64-sys-regs.def: Add `rcwmask_el1' and `rcwsmask_el1'
* aarch64-tbl.h: Define `THE' preprocessor macro.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added `xcvalu`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Added the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Noted XCValu as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-alu-boundaries.d: New test.
* testsuite/gas/riscv/cv-alu-boundaries.l: New test.
* testsuite/gas/riscv/cv-alu-boundaries.s: New test.
* testsuite/gas/riscv/cv-alu-fail-march.d: New test.
* testsuite/gas/riscv/cv-alu-fail-march.l: New test.
* testsuite/gas/riscv/cv-alu-fail-march.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-01.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-02.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-03.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-04.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-05.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-06.s: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.d: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.l: New test.
* testsuite/gas/riscv/cv-alu-fail-operand-07.s: New test.
* testsuite/gas/riscv/cv-alu-insns.d: New test.
* testsuite/gas/riscv/cv-alu-insns.s: New test.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Disassemble xcb operand.
* riscv-opc.c: Defined the MASK and added XCValu instructions.
include/ChangeLog:
* opcode/riscv-opc.h: Added corresponding MATCH and MASK macros
for XCValu.
* opcode/riscv.h: Added corresponding EXTRACT and ENCODE macros
for XCValu.
(enum riscv_insn_class): Added the XCValu instruction class.
