* config/mips/tm-mips.h (struct frame_info): Forward decl.

(struct type): Ditto.
	(struct value): Ditto.

	* config/mips/tm-mips.h (sigtramp_address): Move extern decl
 	from mips-tdep.c to here.
	(sigtramp_end): Ditto.
	(fixup_sigtramp): Ditto.

	* config/mips/tm-mips.h (init_extra_frame_info): Add prototype.
	(mips_frame_chain): Ditto.
	(mips_step_skips_delay): Ditto.
	(mips_frame_saved_pc): Ditto.
	(mips_find_saved_regs): Ditto.
	(mips_frame_num_args): Ditto.
	(mips_pop_frame): Ditto.
	(mips_extract_return_value): Ditto.
	(mips_store_return_value): Ditto.
	(mips_push_dummy_frame): Ditto.
	(mips_push_arguments): Ditto.
	(mips_do_registers_info): Ditto.
	(ecoff_relocate_efi): Ditto.
	(ecoff_relocate_efi): Ditto.
	* irix4-nat.c (fetch_core_registers): Add prototype.
	* mips-tdep.c (read_next_frame_reg): Add prototype
	(heuristic_proc_start): Ditto.
	(heuristic_proc_desc): Ditto.
	(mips_print_register): Ditto.
	* config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype.
	(procfs_stopped_by_watchpoint): Ditto.
	* config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype.
	(procfs_stopped_by_watchpoint): Ditto.
	* config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype.
	(struct symbol): Add forward decl for prototype.

	* breakpoint.c (internal_breakpoint_number): Only needed if
	GET_LONGJMP_TARGET or SOLIB_ADD is defined.

	* objfiles.c (ecoff_relocate_efi): Remove prototype.

gdb/ChangeLog

@@ -1,3 +1,45 @@
+Sun Jul 28 10:46:39 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/mips/tm-mips.h (struct frame_info): Forward decl.
+	(struct type): Ditto.
+	(struct value): Ditto.
+
+	* config/mips/tm-mips.h (sigtramp_address): Move extern decl
+ 	from mips-tdep.c to here.
+	(sigtramp_end): Ditto.
+	(fixup_sigtramp): Ditto.
+
+	* config/mips/tm-mips.h (init_extra_frame_info): Add prototype.
+	(mips_frame_chain): Ditto.
+	(mips_step_skips_delay): Ditto.
+	(mips_frame_saved_pc): Ditto.
+	(mips_find_saved_regs): Ditto.
+	(mips_frame_num_args): Ditto.
+	(mips_pop_frame): Ditto.
+	(mips_extract_return_value): Ditto.
+	(mips_store_return_value): Ditto.
+	(mips_push_dummy_frame): Ditto.
+	(mips_push_arguments): Ditto.
+	(mips_do_registers_info): Ditto.
+	(ecoff_relocate_efi): Ditto.
+	(ecoff_relocate_efi): Ditto.
+	* irix4-nat.c (fetch_core_registers): Add prototype.
+	* mips-tdep.c (read_next_frame_reg): Add prototype
+	(heuristic_proc_start): Ditto.
+	(heuristic_proc_desc): Ditto.
+	(mips_print_register): Ditto.
+	* config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype.
+	(procfs_stopped_by_watchpoint): Ditto.
+	* config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype.
+	(procfs_stopped_by_watchpoint): Ditto.
+	* config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype.
+	(struct symbol): Add forward decl for prototype.
+
+	* breakpoint.c (internal_breakpoint_number): Only needed if
+	GET_LONGJMP_TARGET or SOLIB_ADD is defined.
+
+	* objfiles.c (ecoff_relocate_efi): Remove prototype.
+
 Sat Jul 27 17:47:35 1996  Fred Fish  <fnf@cygnus.com>
 
 	* configure.in: Add test for "long long" support.

gdb/config/mips/nm-irix4.h

@@ -47,6 +47,7 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 #define STOPPED_BY_WATCHPOINT(W) \
   procfs_stopped_by_watchpoint(inferior_pid)
+extern int procfs_stopped_by_watchpoint PARAMS ((int));
 
 #define HAVE_NONSTEPPABLE_WATCHPOINT
 
@@ -54,3 +55,4 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 /* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
 #define target_insert_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, len, 2)
 #define target_remove_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, 0, 0)
+extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int));

gdb/config/mips/tm-mips.h

@@ -20,6 +20,13 @@ You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
+#ifdef __STDC__
+struct frame_info;
+struct symbol;
+struct type;
+struct value;
+#endif
+
 #include <bfd.h>
 #include "coff/sym.h"		/* Needed for PDR below.  */
 #include "coff/symconst.h"
@@ -72,6 +79,7 @@ extern CORE_ADDR mips_skip_prologue PARAMS ((CORE_ADDR addr, int lenient));
 /* Return non-zero if PC points to an instruction which will cause a step
    to execute both the instruction at PC and an instruction at PC+4.  */
 #define STEP_SKIPS_DELAY(pc) (mips_step_skips_delay (pc))
+extern int mips_step_skips_delay PARAMS ((CORE_ADDR));
 
 /* Immediately after a function call, return the saved pc.
    Can't always go through the frames for this because on some machines
@@ -173,6 +181,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
    of register dumps. */
 
 #define DO_REGISTERS_INFO(_regnum, fp) mips_do_registers_info(_regnum, fp)
+extern void mips_do_registers_info PARAMS ((int, int));
 
 /* Total amount of space needed to store our copies of the machine's
    register state, the array `registers'.  */
@@ -245,12 +254,15 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
 
 #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
   mips_extract_return_value(TYPE, REGBUF, VALBUF)
+extern void
+mips_extract_return_value PARAMS ((struct type *, char [], char *));
 
 /* Write into appropriate registers a function return value
    of type TYPE, given in virtual format.  */
 
 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
   mips_store_return_value(TYPE, VALBUF)
+extern void mips_store_return_value PARAMS ((struct type *, char *));
 
 /* Extract from an array REGBUF containing the (raw) register state
    the address in which a function should return its structure value,
@@ -275,6 +287,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
    and produces the frame's chain-pointer. */
 
 #define FRAME_CHAIN(thisframe) (CORE_ADDR) mips_frame_chain (thisframe)
+extern CORE_ADDR mips_frame_chain PARAMS ((struct frame_info *));
 
 /* Define other aspects of the stack frame.  */
 
@@ -289,6 +302,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
 /* Saved Pc.  */
 
 #define FRAME_SAVED_PC(FRAME)	(mips_frame_saved_pc(FRAME))
+extern int mips_frame_saved_pc PARAMS ((struct frame_info *));
 
 #define FRAME_ARGS_ADDRESS(fi)	(fi)->frame
 
@@ -298,6 +312,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
    Can return -1, meaning no way to tell.  */
 
 #define FRAME_NUM_ARGS(num, fi)	(num = mips_frame_num_args(fi))
+extern int mips_frame_num_args PARAMS ((struct frame_info *));
 
 /* Return number of bytes at start of arglist that are not really args.  */
 
@@ -316,6 +331,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
     (frame_saved_regs) = *(frame_info)->saved_regs; \
     (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame; \
   } while (0)
+extern void mips_find_saved_regs PARAMS ((struct frame_info *));
 
 
 /* Things needed for making the inferior call functions.  */
@@ -326,14 +342,18 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
 
 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
     sp = mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
+extern CORE_ADDR
+mips_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
 
 /* Push an empty stack frame, to record the current PC, etc.  */
 
 #define PUSH_DUMMY_FRAME 	mips_push_dummy_frame()
+extern void mips_push_dummy_frame PARAMS ((void));
 
 /* Discard from the stack the innermost frame, restoring all registers.  */
 
 #define POP_FRAME		mips_pop_frame()
+extern void mips_pop_frame PARAMS ((void));
 
 #define MK_OP(op,rs,rt,offset) (((op)<<26)|((rs)<<21)|((rt)<<16)|(offset))
 #ifndef OP_LDFPR
@@ -448,6 +468,7 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
    mips_extra_func_info_t's off of this.  */
 
 #define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
 
 /* Specific information about a procedure.
    This overlays the MIPS's PDR records, 
@@ -464,6 +485,7 @@ typedef struct mips_extra_func_info {
   struct frame_saved_regs *saved_regs;
 
 #define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci)
+extern void init_extra_frame_info PARAMS ((struct frame_info *));
 
 #define	PRINT_EXTRA_FRAME_INFO(fi) \
   { \
@@ -510,3 +532,8 @@ extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *));
    probably much more common.  (FIXME). */
 
 #define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c)
+
+/* These are defined in mdebugread.c and are used in mips-tdep.c  */
+extern CORE_ADDR sigtramp_address, sigtramp_end;
+extern void fixup_sigtramp PARAMS ((void));
+

gdb/irix4-nat.c

@@ -35,6 +35,9 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 typedef unsigned int greg_t;	/* why isn't this defined? */
 
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, unsigned int));
+
 /*
  * See the comment in m68k-tdep.c regarding the utility of these functions.
  */

gdb/mips-tdep.c

@@ -44,6 +44,15 @@ extern struct obstack frame_cache_obstack;
 static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
 #endif
 
+static void mips_print_register PARAMS ((int, int));
+
+static mips_extra_func_info_t
+heuristic_proc_desc PARAMS ((CORE_ADDR, CORE_ADDR, struct frame_info *));
+
+static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+
+static int read_next_frame_reg PARAMS ((struct frame_info *, int));
+
 static void mips_set_fpu_command PARAMS ((char *, int,
 					  struct cmd_list_element *));
 
@@ -59,6 +68,12 @@ static void mips_show_processor_type_command PARAMS ((char *, int));
 static void reinit_frame_cache_sfunc PARAMS ((char *, int,
 					      struct cmd_list_element *));
 
+static mips_extra_func_info_t
+  find_proc_desc PARAMS ((CORE_ADDR pc, struct frame_info *next_frame));
+
+static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
+					 mips_extra_func_info_t proc_desc));
+
 /* This value is the model of MIPS in use.  It is derived from the value
    of the PrID register.  */
 
@@ -186,6 +201,44 @@ struct linked_proc_info
 } *linked_proc_desc_table = NULL;
 
 
+
+/* This returns the PC of the first inst after the prologue.  If we can't
+   find the prologue, then return 0.  */
+
+static CORE_ADDR
+after_prologue (pc, proc_desc)
+     CORE_ADDR pc;
+     mips_extra_func_info_t proc_desc;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR func_addr, func_end;
+
+  if (!proc_desc)
+    proc_desc = find_proc_desc (pc, NULL);
+
+  if (proc_desc)
+    {
+      /* If function is frameless, then we need to do it the hard way.  I
+	 strongly suspect that frameless always means prologueless... */
+      if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+	  && PROC_FRAME_OFFSET (proc_desc) == 0)
+	return 0;
+    }
+
+  if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    return 0;			/* Unknown */
+
+  sal = find_pc_line (func_addr, 0);
+
+  if (sal.end < func_end)
+    return sal.end;
+
+  /* The line after the prologue is after the end of the function.  In this
+     case, tell the caller to find the prologue the hard way.  */
+
+  return 0;
+}
+
 /* Guaranteed to set fci->saved_regs to some values (it never leaves it
    NULL).  */
 
@@ -258,6 +311,11 @@ mips_find_saved_regs (fci)
       /* In a dummy frame we know exactly where things are saved.  */
       && !PROC_DESC_IS_DUMMY (proc_desc)
 
+      /* Don't bother unless we are inside a function prologue.  Outside the
+	 prologue, we know where everything is. */
+
+      && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+
       /* Not sure exactly what kernel_trap means, but if it means
 	 the kernel saves the registers without a prologue doing it,
 	 we better not examine the prologue to see whether registers
@@ -1129,6 +1187,19 @@ mips_skip_prologue (pc, lenient)
     int offset;
     int seen_sp_adjust = 0;
     int load_immediate_bytes = 0;
+    CORE_ADDR post_prologue_pc;
+
+    /* See if we can determine the end of the prologue via the symbol table.
+       If so, then return either PC, or the PC after the prologue, whichever
+       is greater.  */
+
+    post_prologue_pc = after_prologue (pc, NULL);
+
+    if (post_prologue_pc != 0)
+      return max (pc, post_prologue_pc);
+
+    /* Can't determine prologue from the symbol table, need to examine
+       instructions.  */
 
     /* Skip the typical prologue instructions. These are the stack adjustment
        instruction and the instructions that save registers on the stack
@@ -1284,10 +1355,6 @@ mips_store_return_value (valtype, valbuf)
   write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
 }
 
-/* These exist in mdebugread.c.  */
-extern CORE_ADDR sigtramp_address, sigtramp_end;
-extern void fixup_sigtramp PARAMS ((void));
-
 /* Exported procedure: Is PC in the signal trampoline code */
 
 int

gdb/objfiles.c

@@ -35,10 +35,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 #include "obstack.h"
 #include "gdb_string.h"
 
-/* FIXME: imported from mdebugread.c */
-
-extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
-
 /* Prototypes for local functions */
 
 #if !defined(NO_MMALLOC) && defined(HAVE_MMAP)