diff --git a/binutils/ChangeLog b/binutils/ChangeLog
index 941a358c19b..201b4668eb7 100644
--- a/binutils/ChangeLog
+++ b/binutils/ChangeLog
@@ -1,3 +1,37 @@
+2016-06-22  Nick Clifton  <nickc@redhat.com>
+
+	* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
+	Skip bfdtest1 tests for tic30 target.
+	* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
+	target.
+	* testsuite/binutils-all/compress.exp: Expect some tests to fail
+	on the nds32.
+	* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
+	* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
+	targets.
+	* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
+	targets.
+	* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
+	if the bintest.o file was created.  Use the
+	get_standard_section_names proc to get the name of the data
+	section.
+	* testsuite/binutils-all/objdump.exp: Update regexps to allow for
+	RX section names.
+	* testsuite/binutils-all/readelf.exp: Use
+	get_standard_section_names proc to get the name of the data
+	section.
+	* testsuite/binutils-all/readelf.r: Allow for non standard text
+	section names.
+	* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
+	* testsuite/binutils-all/size.exp: Allow for non standard section
+	names.
+	* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
+	to fail on mips targets.
+	* testsuite/lib/utils-lib.exp (default_binutils_run): Use
+	get_standard_section_names proc.
+	(run_dump_test): Likewise.
+	(proc get_standard_section_names): New proc.
+
 2016-06-22  Nick Clifton  <nickc@redhat.com>
 
 	* readelf.c (dynamic_section_mips_val): Increase size of timebuf.
diff --git a/binutils/testsuite/binutils-all/ar.exp b/binutils/testsuite/binutils-all/ar.exp
index 45be9b1b594..b8e0e20a1a5 100644
--- a/binutils/testsuite/binutils-all/ar.exp
+++ b/binutils/testsuite/binutils-all/ar.exp
@@ -26,6 +26,10 @@ if ![is_remote host] {
     }
 }
 
+if {[istarget "alpha-*-*"]} then {
+  return
+}
+
 # send_user "Version [binutil_version $AR]"
 
 # Test long file name support
@@ -600,7 +604,7 @@ proc empty_archive { } {
 # programs are built but not installed, running the testsuite on an
 # installed toolchain will produce ERRORs about missing bfdtest1 and
 # bfdtest2 executables.
-if { [file exists $base_dir/bfdtest1] && [file exists $base_dir/bfdtest2] } {
+if { ![istarget "tic30-*-*"] && [file exists $base_dir/bfdtest1] && [file exists $base_dir/bfdtest2] } {
     set bfdtests [list bfdtest1 bfdtest2]
 
     long_filenames $bfdtests
diff --git a/binutils/testsuite/binutils-all/arm/objdump.exp b/binutils/testsuite/binutils-all/arm/objdump.exp
index 1bdc23e5404..4b75701f7eb 100644
--- a/binutils/testsuite/binutils-all/arm/objdump.exp
+++ b/binutils/testsuite/binutils-all/arm/objdump.exp
@@ -18,6 +18,10 @@ if {![istarget "arm*-*-*"]} then {
   return
 }
 
+if {[istarget "*-*-aout"]} then {
+  return
+}
+
 if {![is_remote host] && [which $OBJDUMP] == 0} then {
     perror "$OBJDUMP does not exist"
     return
diff --git a/binutils/testsuite/binutils-all/compress.exp b/binutils/testsuite/binutils-all/compress.exp
index b35aba42444..65bf67d42f7 100644
--- a/binutils/testsuite/binutils-all/compress.exp
+++ b/binutils/testsuite/binutils-all/compress.exp
@@ -162,6 +162,7 @@ if ![string match "" $got] then {
     }
 }
 
+setup_xfail "nds32*-*-*"
 set testname "objdump compress debug sections"
 set got [remote_exec host "$OBJDUMP -W ${compressedfile}.o" "" "/dev/null" "objdump.out"]
 if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
@@ -174,6 +175,7 @@ if { [regexp_diff objdump.out $srcdir/$subdir/dw2-1.W] } then {
     pass "$testname"
 }
 
+setup_xfail "nds32*-*-*"
 set testname "objdump compress debug sections 3"
 set got [remote_exec host "$OBJDUMP -W ${compressedfile3}.o" "" "/dev/null" "objdump.out"]
 if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
@@ -544,6 +546,7 @@ if ![string match "" $got] then {
     }
 }
 
+setup_xfail "nds32*-*-*"
 set testname "objcopy compress debug sections in archive with zlib-gabi"
 set got [binutils_run $OBJCOPY "--compress-debug-sections=zlib-gabi ${copyfile}gabi.a ${compressedcopyfile}gabi.a"]
 if ![string match "" $got] then {
@@ -564,6 +567,7 @@ if ![string match "" $got] then {
     }
 }
 
+setup_xfail "nds32*-*-*"
 set testname "objdump compress debug sections 3 with zlib-gabi"
 set got [remote_exec host "$OBJDUMP -W ${compressedfile3}gabi.o" "" "/dev/null" "objdump.out"]
 if { [lindex $got 0] != 0 || ![string match "" [lindex $got 1]] } then {
diff --git a/binutils/testsuite/binutils-all/copy-3.d b/binutils/testsuite/binutils-all/copy-3.d
index 655986af5e6..284aa56b459 100644
--- a/binutils/testsuite/binutils-all/copy-3.d
+++ b/binutils/testsuite/binutils-all/copy-3.d
@@ -3,7 +3,7 @@
 #objcopy: --set-section-flags .text=alloc,data
 #name: copy with setting section flags 3
 #source: bintest.s
-#not-target: *-*-*aout *-*-*pe *-*-*coff hppa*-*-hpux* *-*-cygwin* *-*-mingw* m68k-*-netbsd m68k-*-openbsd* ns32k-*-netbsd rs6000-*-*
+#not-target: *-*-*aout *-*-*coff *-*-cygwin* *-*-darwin *-*-mingw* *-*-go32 *-*-*pe hppa*-*-hpux* m68k-*-netbsd m68k-*-openbsd* ns32k-*-netbsd powerpc-*-aix* rs6000-*-* rx-*-*
 # The .text # section in PE/COFF has a fixed set of flags and these
 # cannot be changed.  We skip it for them.
 
diff --git a/binutils/testsuite/binutils-all/copy-4.d b/binutils/testsuite/binutils-all/copy-4.d
index 41fccf00406..47a217c5d02 100644
--- a/binutils/testsuite/binutils-all/copy-4.d
+++ b/binutils/testsuite/binutils-all/copy-4.d
@@ -2,6 +2,7 @@
 #source: bintest.s
 #strip: --strip-unneeded
 #nm: -n
+#not-target: *-*-aix* *-*-linuxecoff
 #name: strip --strip-unneeded on common symbol
 
 #...
diff --git a/binutils/testsuite/binutils-all/nm.exp b/binutils/testsuite/binutils-all/nm.exp
index 94f7f9cb058..69944ebe15e 100644
--- a/binutils/testsuite/binutils-all/nm.exp
+++ b/binutils/testsuite/binutils-all/nm.exp
@@ -163,6 +163,7 @@ if [regexp $want $got] then {
 # all the ELF variants, but adding the patterns here to that proc then
 # introduces a whole slew of new regressions in the GAS and LD testsuites.
 if {   [is_elf_format]
+    || [istarget *-*-beos]
     || [istarget *-*-dragonfly*]
     || [istarget *-*-*elf]
     || [istarget *-*-freebsd*]
diff --git a/binutils/testsuite/binutils-all/objcopy.exp b/binutils/testsuite/binutils-all/objcopy.exp
index af333ac542b..94075f0f570 100644
--- a/binutils/testsuite/binutils-all/objcopy.exp
+++ b/binutils/testsuite/binutils-all/objcopy.exp
@@ -46,9 +46,10 @@ proc objcopy_test {testname srcfile} {
     global tempfile
     global copyfile
 
-    if {![binutils_assemble $srcdir/$subdir/${srcfile} tmpdir/bintest.o]} then {
+    if {![binutils_assemble $srcdir/$subdir/${srcfile} $tempfile]} then {
  	perror "unresolved $testname"
 	unresolved "objcopy ($testname)"
+	remote_file host delete $tempfile
 	return
     }
 
@@ -107,41 +108,48 @@ proc objcopy_test {testname srcfile} {
 
 objcopy_test "simple copy" bintest.s
 
-# Test reversing bytes in a section.
+if { [file exists $tempfile] } {
+    # Test reversing bytes in a section.
 
-set reversed ${tempfile}-reversed
-set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j .data --reverse-bytes=4 $tempfile $reversed"]
-
-if ![string equal "" $got] then {
-    fail "objcopy --reverse-bytes"
-} else {
-    if [is_remote host] {
-        remote_upload host ${reversed} tmpdir/copy-reversed.o
-        set reversed tmpdir/copy-reversed.o
+    set reversed ${tempfile}-reversed
+    set sect_names [get_standard_section_names]
+    if { $sect_names != "" } {
+	set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j [lindex $sect_names 1] --reverse-bytes=4 $tempfile $reversed"]
+    } else {
+	set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -j .data --reverse-bytes=4 $tempfile $reversed"]
     }
 
-    set origdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $tempfile"]
-    set revdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $reversed"]
-
-    set want "^ \[0-9\]+ (\[0-9\]+)"
-    set found_orig [regexp -lineanchor $want $origdata -> origdata]
-    set found_rev [regexp -lineanchor $want $revdata -> revdata]
-
-    if {$found_orig == 0 || $found_rev == 0} then {
-	# som doesn't have a .data section
-	setup_xfail "hppa*-*-hpux*"
-	clear_xfail "hppa*64*-*-hpux*"
-
-        fail "objcopy --reverse-bytes"
+    if ![string equal "" $got] then {
+	fail "objcopy --reverse-bytes"
     } else {
-        scan $origdata "%2x%2x%2x%2x" b1 b2 b3 b4
-        scan $revdata "%2x%2x%2x%2x" c4 c3 c2 c1
+	if [is_remote host] {
+	    remote_upload host ${reversed} tmpdir/copy-reversed.o
+	    set reversed tmpdir/copy-reversed.o
+	}
 
-        if {$b1 == $c1 && $b2 == $c2 && $b3 == $c3 && $b4 == $c4} then {
-            pass "objcopy --reverse-bytes"
-        } else {
-            fail "objcopy --reverse-bytes"
-        }
+	set origdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $tempfile"]
+	set  revdata [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s -j .data $reversed"]
+
+	set want "^ \[0-9\]+ (\[0-9\]+)"
+	set found_orig [regexp -lineanchor $want $origdata -> origdata]
+	set found_rev [regexp -lineanchor $want $revdata -> revdata]
+
+	if {$found_orig == 0 || $found_rev == 0} then {
+	    # som doesn't have a .data section
+	    setup_xfail "hppa*-*-hpux*"
+	    clear_xfail "hppa*64*-*-hpux*"
+
+	    fail "objcopy --reverse-bytes"
+	} else {
+	    scan $origdata "%2x%2x%2x%2x" b1 b2 b3 b4
+	    scan $revdata "%2x%2x%2x%2x" c4 c3 c2 c1
+
+	    if {$b1 == $c1 && $b2 == $c2 && $b3 == $c3 && $b4 == $c4} then {
+		pass "objcopy --reverse-bytes"
+	    } else {
+		fail "objcopy --reverse-bytes"
+	    }
+	}
     }
 }
 
@@ -184,66 +192,68 @@ if ![string equal "" $got] then {
 
 # Test generating S records.
 
-# We make the srec filename 8.3 compatible. Note that the header string
-# matched against depends on the name of the file. Ugh.
+if { [file exists $tempfile] } {
+    # We make the srec filename 8.3 compatible. Note that the header string
+    # matched against depends on the name of the file. Ugh.
 
-if [is_remote host] {
-    set srecfile copy.sre
-    set header_string S00B0000636F70792E737265C1
-} else {
-    set srecfile ${copyfile}.srec
-    set header_string S0130000746D706469722F636F70792E7372656397
-}
-
-set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${srecfile}"]
-
-if ![string equal "" $got] then {
-    fail "objcopy -O srec"
-} else {
     if [is_remote host] {
-	remote_upload host ${srecfile} tmpdir/copy.srec
-	set srecfile tmpdir/copy.srec
+	set srecfile copy.sre
+	set header_string S00B0000636F70792E737265C1
+    } else {
+	set srecfile ${copyfile}.srec
+	set header_string S0130000746D706469722F636F70792E7372656397
     }
-    set file [open ${srecfile} r]
 
-    # The first S record is fixed by the file name we are using.
-    gets $file line
-    send_log "$line\n"
-    verbose $line
-    if ![regexp "$header_string.*" $line] {
-	send_log "bad header\n"
+    set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${srecfile}"]
+
+    if ![string equal "" $got] then {
 	fail "objcopy -O srec"
     } else {
-	while {[gets $file line] != -1 \
-	       && [regexp "^S\[123\]\[0-9a-fA-F\]+\[\r\n\]*$" $line]} {
-	    send_log "$line\n"
-	    verbose $line
-	    set line "**EOF**"
+	if [is_remote host] {
+	    remote_upload host ${srecfile} tmpdir/copy.srec
+	    set srecfile tmpdir/copy.srec
 	}
+	set file [open ${srecfile} r]
+
+	# The first S record is fixed by the file name we are using.
+	gets $file line
 	send_log "$line\n"
 	verbose $line
-	if ![regexp "^S\[789\]\[0-9a-fA-F\]+\[\r\n\]*$" $line] then {
-	    send_log "bad trailer\n"
+	if ![regexp "$header_string.*" $line] {
+	    send_log "bad header\n"
 	    fail "objcopy -O srec"
 	} else {
-	    if {[gets $file line] != -1} then {
-		send_log "garbage at end\n"
+	    while {[gets $file line] != -1 \
+		       && [regexp "^S\[123\]\[0-9a-fA-F\]+\[\r\n\]*$" $line]} {
 		send_log "$line\n"
 		verbose $line
+		set line "**EOF**"
+	    }
+	    send_log "$line\n"
+	    verbose $line
+	    if ![regexp "^S\[789\]\[0-9a-fA-F\]+\[\r\n\]*$" $line] then {
+		send_log "bad trailer\n"
 		fail "objcopy -O srec"
 	    } else {
-		set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -f ${srecfile}"]
-		if ![regexp "file format srec" $got] then {
-		    send_log "objdump failed\n"
+		if {[gets $file line] != -1} then {
+		    send_log "garbage at end\n"
+		    send_log "$line\n"
+		    verbose $line
 		    fail "objcopy -O srec"
 		} else {
-		    pass "objcopy -O srec"
+		    set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -f ${srecfile}"]
+		    if ![regexp "file format srec" $got] then {
+			send_log "objdump failed\n"
+			fail "objcopy -O srec"
+		    } else {
+			pass "objcopy -O srec"
+		    }
 		}
 	    }
 	}
-    }
 
-    close $file
+	close $file
+    }
 }
 
 # Test setting and adjusting the start address.  We only test this
@@ -644,7 +654,7 @@ proc copy_executable { prog flags test1 test2 } {
 
 	# This also fails for mips*-*-elf targets.  See elf32-mips.c
 	# mips_elf_sym_is_global.
-	setup_xfail "mips*-*-elf"
+	setup_xfail "mips*-*-elf" "tx39-*-*"
 
 	setup_xfail "arm*-*-coff"
 	setup_xfail "arm*-*-pe"
diff --git a/binutils/testsuite/binutils-all/objdump.exp b/binutils/testsuite/binutils-all/objdump.exp
index 3573037b270..f097a7e0719 100644
--- a/binutils/testsuite/binutils-all/objdump.exp
+++ b/binutils/testsuite/binutils-all/objdump.exp
@@ -86,7 +86,7 @@ if ![regexp $want $got] then {
 
 set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -h $testfile"]
 
-set want "$testfile:\[ 	\]*file format.*Sections.*\[0-9\]+\[ 	\]+\[^ 	\]*(text|TEXT|\\\$CODE\\\$)\[^ 	\]*\[ 	\]*(\[0-9a-fA-F\]+).*\[0-9\]+\[ 	\]+\[^ 	\]*(\\.data|DATA)\[^ 	\]*\[ 	\]*(\[0-9a-fA-F\]+)"
+set want "$testfile:\[ 	\]*file format.*Sections.*\[0-9\]+\[ 	\]+\[^ 	\]*(text|TEXT|P|\\\$CODE\\\$)\[^ 	\]*\[ 	\]*(\[0-9a-fA-F\]+).*\[0-9\]+\[ 	\]+\[^ 	\]*(\\.data|DATA|D_1)\[^ 	\]*\[ 	\]*(\[0-9a-fA-F\]+)"
 
 if ![regexp $want $got all text_name text_size data_name data_size] then {
     fail "objdump -h"
@@ -136,7 +136,7 @@ if {![info exists vars(text_symbol)] \
 
 set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -r $testfile"]
 
-set want "$testfile:\[ 	\]*file format.*RELOCATION RECORDS FOR \\\[\[^\]\]*(text|TEXT|\\\$CODE\\\$)\[^\]\]*\\\].*external_symbol"
+set want "$testfile:\[ 	\]*file format.*RELOCATION RECORDS FOR \\\[\[^\]\]*(text|TEXT|P|\\\$CODE\\\$)\[^\]\]*\\\].*external_symbol"
 
 if [regexp $want $got] then {
     pass "objdump -r"
@@ -148,7 +148,7 @@ if [regexp $want $got] then {
 
 set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -s $testfile"]
 
-set want "$testfile:\[ 	\]*file format.*Contents.*(text|TEXT|\\\$CODE\\\$)\[^0-9\]*\[ 	\]*\[0-9a-fA-F\]*\[ 	\]*(00000001|01000000|00000100).*Contents.*(data|DATA)\[^0-9\]*\[ 	\]*\[0-9a-fA-F\]*\[ 	\]*(00000002|02000000|00000200)"
+set want "$testfile:\[ 	\]*file format.*Contents.*(text|TEXT|P|\\\$CODE\\\$)\[^0-9\]*\[ 	\]*\[0-9a-fA-F\]*\[ 	\]*(00000001|01000000|00000100).*Contents.*(data|DATA|D_1)\[^0-9\]*\[ 	\]*\[0-9a-fA-F\]*\[ 	\]*(00000002|02000000|00000200)"
 
 if [regexp $want $got] then {
     pass "objdump -s"
@@ -265,6 +265,7 @@ if { ![is_elf_format] } then {
 	send_log "\n"
     }
 
+    setup_xfail "msp430-*-*" "nds32*-*-*"
     if { [regexp_diff objdump.out $srcdir/$subdir/dw2-ranges.W] } then {
 	fail "objdump -W for debug_ranges"
     } else {
diff --git a/binutils/testsuite/binutils-all/readelf.exp b/binutils/testsuite/binutils-all/readelf.exp
index 500bf6b1bcf..91d816c36bc 100644
--- a/binutils/testsuite/binutils-all/readelf.exp
+++ b/binutils/testsuite/binutils-all/readelf.exp
@@ -100,7 +100,7 @@ proc readelf_test { options binary_file regexp_file xfails } {
 
     set target_machine ""
     if [istarget "mips*-*-*"] then {
-	if { [istarget "mips*-*-*linux*"]
+	if {    [istarget "mips*-*-*linux*"]
 	     || [istarget "mips*-sde-elf*"]
 	     || [istarget "mips*-mti-elf*"]
 	     || [istarget "mips*-img-elf*"]
@@ -269,7 +269,12 @@ proc readelf_dump_test {} {
     set tempfile [remote_download host tmpdir/dumptest.o]
 
     # Run "readelf -p.data" on it.
-    set got [remote_exec host "$READELF $READELFFLAGS -p.data $tempfile" "" "/dev/null" "readelf.out"]
+    set sect_names [get_standard_section_names]
+    if { $sect_names != "" } {
+	set got [remote_exec host "$READELF $READELFFLAGS -p[lindex $sect_names 1] $tempfile" "" "/dev/null" "readelf.out"]
+    } else {
+	set got [remote_exec host "$READELF $READELFFLAGS -p.data $tempfile" "" "/dev/null" "readelf.out"]
+    }
     set got [lindex $got 1]
 
     # Upload the results.
@@ -334,6 +339,7 @@ readelf_find_size $tempfile
 # Run the tests.
 readelf_test -h $tempfile readelf.h  {}
 readelf_test -S $tempfile readelf.s  {}
+setup_xfail "mips-*-*irix*"
 readelf_test -s $tempfile readelf.ss {}
 readelf_test -r $tempfile readelf.r  {}
 
diff --git a/binutils/testsuite/binutils-all/readelf.r b/binutils/testsuite/binutils-all/readelf.r
index 065fccf50ac..db23dcd842d 100644
--- a/binutils/testsuite/binutils-all/readelf.r
+++ b/binutils/testsuite/binutils-all/readelf.r
@@ -1,5 +1,5 @@
 
-Relocation section '.rel.*text' at offset 0x.* contains . entries:
+Relocation section '.rel.*' at offset 0x.* contains . entries:
  Offset     Info    Type            Sym.Value  Sym. Name.*
 # NDS32 targets puts R_NDS32_RELAX_ENT here
 #...
diff --git a/binutils/testsuite/binutils-all/readelf.s b/binutils/testsuite/binutils-all/readelf.s
index 22b38435b5f..fd62fdab649 100644
--- a/binutils/testsuite/binutils-all/readelf.s
+++ b/binutils/testsuite/binutils-all/readelf.s
@@ -5,12 +5,12 @@ Section Headers:
  +\[ 0\] +NULL +00000000 000000 000000 00 +0 +0 +0
 # On the normal MIPS systems, sections must be aligned to 16 byte
 # boundaries. On IA64, text sections are aligned to 16 byte boundaries.
- +\[ 1\] .text +PROGBITS +00000000 0000(34|40) 0000(08|10) 00 +AX +0 +0 +(.|..)
- +\[ 2\] .rel.+text +REL. +0+ 0+.* 0000.. 0. +I +.+ +1 +4
+ +\[ 1\] .* +PROGBITS +00000000 0000(34|38|40) 0000(08|10) 00 +AX +0 +0 +(.|..)
+ +\[ 2\] .rel.* +REL. +0+ 0+.* 0000.. 0. +I +.+ +1 +4
 # MIPS targets put .rela.text here.
 #...
- +\[ .\] .data +PROGBITS +00000000 0000(3c|48|50) 0000(04|10) 00 +WA +0 +0 +(.|..)
- +\[ .\] .bss +NOBITS +00000000 0000(40|4c|60) 000000 00 +WA +0 +0 +(.|..)
+ +\[ .\] .* +PROGBITS +00000000 0000(3c|40|48|50) 0000(04|10) 00 +WA +0 +0 +(.|..)
+ +\[ .\] .* +NOBITS +00000000 0000(40|44|4c|60) 000000 00 +WA +0 +0 +(.|..)
 # MIPS targets put .reginfo, .mdebug, .MIPS.abiflags and .gnu.attributes here.
 # v850 targets put .call_table_data and .call_table_text here.
 #...
diff --git a/binutils/testsuite/binutils-all/size.exp b/binutils/testsuite/binutils-all/size.exp
index fb2539336df..54484a2bed9 100644
--- a/binutils/testsuite/binutils-all/size.exp
+++ b/binutils/testsuite/binutils-all/size.exp
@@ -66,7 +66,7 @@ if ![regexp $want $got all text data bss dtot hextot] then {
 
 set got [binutils_run $SIZE "$SIZEFLAGS -A ${testfile}"]
 
-set want "${testfile}.*(text|TEXT)\[^\n\r\]*\[ 	\]($dec)\[ 	\]+$dec.*(\\.data|DATA)\[^\n\r\]*\[ 	\]($dec)\[ 	\]+$dec"
+set want "${testfile}.*(text|TEXT|P)\[^\n\r\]*\[ 	\]($dec)\[ 	\]+$dec.*(\\.data|DATA|D_1)\[^\n\r\]*\[ 	\]($dec)\[ 	\]+$dec"
 
 if ![regexp $want $got all textname textsize dataname datasize] then {
     fail "size -A"
diff --git a/binutils/testsuite/binutils-all/update-section.exp b/binutils/testsuite/binutils-all/update-section.exp
index 01fe713c8ab..74772fa6aaa 100644
--- a/binutils/testsuite/binutils-all/update-section.exp
+++ b/binutils/testsuite/binutils-all/update-section.exp
@@ -99,6 +99,7 @@ if { ![do_objcopy update-1.o \
 # Check that the updated object files are as expected.
 do_compare update-1.o update-2.o
 do_compare update-1.o update-3.o
+setup_xfail "mips*-*-*" "tx39-*-*"
 do_compare update-1.o update-4.o
 
 # Check that --update-section on an unknown section will fail.
diff --git a/binutils/testsuite/lib/utils-lib.exp b/binutils/testsuite/lib/utils-lib.exp
index 790708a9ba5..6d2de5daef0 100644
--- a/binutils/testsuite/lib/utils-lib.exp
+++ b/binutils/testsuite/lib/utils-lib.exp
@@ -66,6 +66,15 @@ proc default_binutils_run { prog progargs } {
 	}
     }
 
+    # For objdump, automatically translate standard section
+    # names to the targets one, if they are different.
+    set sect_names [get_standard_section_names]
+    if { $sect_names != "" && [string match "*objdump" $prog] } {
+        regsub -- "-j \\.text" $progargs "-j [lindex $sect_names 0]" progargs
+        regsub -- "-j \\.data" $progargs "-j [lindex $sect_names 1]" progargs
+        regsub -- "-j \\.bss"  $progargs "-j [lindex $sect_names 2]" progargs
+    }
+
     send_log "$prog $progargs\n"
     verbose "$prog $progargs"
 
@@ -487,6 +496,15 @@ proc run_dump_test { name {extra_options {}} } {
 	return
     }
 
+    # For objdump, automatically translate standard section names to the targets one,
+    # if they are different.
+    set sect_names [get_standard_section_names]
+    if { $sect_names != "" && $dumpprogram == "objdump"} {
+        regsub -- "-j \\.text" $progopts1 "-j [lindex $sect_names 0]" progopts1
+        regsub -- "-j \\.data" $progopts1 "-j [lindex $sect_names 1]" progopts1
+        regsub -- "-j \\.bss"  $progopts1 "-j [lindex $sect_names 2]" progopts1
+    }
+
     verbose "running $binary $progopts $progopts1" 3
 
     set cmd "$binary $progopts $progopts1 ${copyfile}.o"
@@ -563,3 +581,16 @@ proc verbose_eval { expr { level 1 } } {
     global verbose
     if $verbose>$level then { eval verbose "$expr" $level }
 }
+
+# Internal procedure: return the names of the standard sections
+#
+proc get_standard_section_names {} {
+    if [istarget "rx-*-*"] {
+        return { "P" "D_1" "B_1" }
+    }
+    if [istarget "alpha*-*-*vms*"] {
+        # Double quote: for TCL and for sh.
+        return { "\\\$CODE\\\$" "\\\$DATA\\\$" "\\\$BSS\\\$" }
+    }
+    return
+}