binutils-gdb/ld/testsuite/ld-avr/relax-elf-flags-04.d

#name: AVR, check link-relax flag is clear on partial link (both files)
#as: -mmcu=avrxmega2
#ld: -r -mavrxmega2
#source: relax-elf-flags-a.s -mno-link-relax
#source: relax-elf-flags-b.s -mno-link-relax
#readelf: -h
#target: avr-*-*

ELF Header:
#...
  Flags:                             0x66, avr:102
#...
AVR/ld: Propagate link-relax elf header flag correctly. The AVR target has an elf header flag to indicate if an object was assembler ready for linker relaxation. If a partial link is performed then it is important that the link-relax flag in the output object is set correctly, otherwise, during the final link, we might try to perform linker relaxation on code that was not assembled suitably. As the link-relax elf header covers the entire object file we must be conservative when setting the flag in the output object, so, for a partial link, any input object that does not have the link-relax flag set will cause the output object to also not have the link-relax flag set. This conservative approach could be softened in future, we only need to disable the link relax flag if an input file is not marked link-relax ready, and the input file contains a relaxable section. However, I've left this optimisation for a later day. For the final link I've overloaded the use of the link-relax elf header flag, in a final executable, the flag now indicates if the executable was built with linker relaxation on or not. ld/ChangeLog: * emultempl/avrelf.em: Add include of elf/avr.h. (avr_finish): New function. (LDEMUL_FINISH): Added. ld/testsuite/ChangeLog: * ld-avr/relax-elf-flags-01.d: New file. * ld-avr/relax-elf-flags-02.d: New file. * ld-avr/relax-elf-flags-03.d: New file. * ld-avr/relax-elf-flags-04.d: New file. * ld-avr/relax-elf-flags-05.d: New file. * ld-avr/relax-elf-flags-06.d: New file. * ld-avr/relax-elf-flags-07.d: New file. * ld-avr/relax-elf-flags-08.d: New file. * ld-avr/relax-elf-flags-a.s: New file. * ld-avr/relax-elf-flags-b.s: New file. 2014-11-23 07:25:17 +08:00			`#name: AVR, check link-relax flag is clear on partial link (both files)`
			`#as: -mmcu=avrxmega2`
			`#ld: -r -mavrxmega2`
AVR: Assembler now prepares for linker relaxation by default. Have the assembler prepare for linker relaxation by default. This means that users will be able to make use of linker relaxation without having to adjust the assembler flags, this can make life easier when compiling libraries. Having this on by default in the assembler should make no difference to the assembler code produced, however, some of the debug information will be slightly less compressed. A few tests needed to be updated as a result of this change as they relied on linker relaxation support being off by default. I've tightened up the definition of which sections can be relaxed on AVR as part of this commit, the assembler used to think that all non-debugging sections could be relaxed, when in reality only code sections can be relaxed for AVR. The previous definition was not dangerous, just over cautious. The new tighter definition allows an extra test (gas/testsuite/gas/all/forward.d) to continue to pass. gas/ChangeLog: * config/tc-avr.c (struct avr_opt_s): Change link_relax to no_link_relax, extend comment. (enum options): Add new OPTION_NO_LINK_RELAX. (md_longopts): Add entry for -mno-link-relax. (md_parse_option): Handle OPTION_NO_LINK_RELAX, and update OPTION_LINK_RELAX. (md_begin): Initialise linkrelax from no_link_relax. (md_show_usage): Include -mno-link-relax option. (relaxable_section): Only allocatable code sections can be relaxed. * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define. gas/testsuite/ChangeLog: * gas/all/gas.exp: Test will not pass on AVR due to linker relaxation support. * gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option. * gas/avr/link-relax-elf-flag-clear.d: Likewise. ld/testsuite/ChangeLog: * ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax option. * ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise. 2014-10-27 18:51:17 +08:00			`#source: relax-elf-flags-a.s -mno-link-relax`
			`#source: relax-elf-flags-b.s -mno-link-relax`
AVR/ld: Propagate link-relax elf header flag correctly. The AVR target has an elf header flag to indicate if an object was assembler ready for linker relaxation. If a partial link is performed then it is important that the link-relax flag in the output object is set correctly, otherwise, during the final link, we might try to perform linker relaxation on code that was not assembled suitably. As the link-relax elf header covers the entire object file we must be conservative when setting the flag in the output object, so, for a partial link, any input object that does not have the link-relax flag set will cause the output object to also not have the link-relax flag set. This conservative approach could be softened in future, we only need to disable the link relax flag if an input file is not marked link-relax ready, and the input file contains a relaxable section. However, I've left this optimisation for a later day. For the final link I've overloaded the use of the link-relax elf header flag, in a final executable, the flag now indicates if the executable was built with linker relaxation on or not. ld/ChangeLog: * emultempl/avrelf.em: Add include of elf/avr.h. (avr_finish): New function. (LDEMUL_FINISH): Added. ld/testsuite/ChangeLog: * ld-avr/relax-elf-flags-01.d: New file. * ld-avr/relax-elf-flags-02.d: New file. * ld-avr/relax-elf-flags-03.d: New file. * ld-avr/relax-elf-flags-04.d: New file. * ld-avr/relax-elf-flags-05.d: New file. * ld-avr/relax-elf-flags-06.d: New file. * ld-avr/relax-elf-flags-07.d: New file. * ld-avr/relax-elf-flags-08.d: New file. * ld-avr/relax-elf-flags-a.s: New file. * ld-avr/relax-elf-flags-b.s: New file. 2014-11-23 07:25:17 +08:00			`#readelf: -h`
			`#target: avr--`

			`ELF Header:`
			`#...`
			`Flags: 0x66, avr:102`
			`#...`