binutils-gdb/cpu/or1korbis.cpu

1254 lines
36 KiB
Plaintext
Raw Normal View History

; OpenRISC Basic Instruction Set 32-bit (ORBIS) -*- Scheme -*-
; Copyright 2000-2014 Free Software Foundation, Inc.
; Contributed for OR32 by Johan Rydberg, jrydberg@opencores.org
; Modified by Julius Baxter, juliusbaxter@gmail.com
; Modified by Peter Gavin, pgavin@gmail.com
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 3 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program; if not, see <http://www.gnu.org/licenses/>
; Instruction fields.
; Hardware for immediate operands
(dnh h-simm16 "16-bit signed immediate" ((MACH ORBIS-MACHS)) (immediate (INT 16)) () () ())
(dnh h-uimm16 "16-bit unsigned immediate" () (immediate (UINT 16)) () () ())
(dnh h-uimm6 "6-bit unsigned immediate" () (immediate (UINT 6)) () () ())
; Hardware for the (internal) atomic registers
(dsh h-atomic-reserve "atomic reserve flag" () (register BI))
(dsh h-atomic-address "atomic reserve address" () (register SI))
; Instruction classes.
(dnf f-opcode "insn opcode" ((MACH ORBIS-MACHS)) 31 6)
; Register fields.
(dnf f-r1 "r1" ((MACH ORBIS-MACHS)) 25 5)
(dnf f-r2 "r2" ((MACH ORBIS-MACHS)) 20 5)
(dnf f-r3 "r3" ((MACH ORBIS-MACHS)) 15 5)
; Sub fields
(dnf f-op-25-2 "op-25-2" ((MACH ORBIS-MACHS)) 25 2) ;; nop
(dnf f-op-25-5 "op-25-5" ((MACH ORBIS-MACHS)) 25 5) ;; sys, trap, *sync, sf*
(dnf f-op-16-1 "op-16-1" ((MACH ORBIS-MACHS)) 16 1) ;; movhi,macrc
(dnf f-op-7-4 "op-7-4" ((MACH ORBIS-MACHS)) 7 4)
(dnf f-op-3-4 "op-3-4" ((MACH ORBIS-MACHS)) 3 4)
(dnf f-op-9-2 "op-9-2" ((MACH ORBIS-MACHS)) 9 2) ;; alu ops upper opcode
(dnf f-op-9-4 "op-9-4" ((MACH ORBIS-MACHS)) 9 4) ;;
(dnf f-op-7-8 "op-7-8" ((MACH ORBIS-MACHS)) 7 8)
(dnf f-op-7-2 "op-7-2" ((MACH ORBIS-MACHS)) 7 2) ;; alu lower upper opc,shroti
; Reserved fields
(dnf f-resv-25-26 "resv-25-26" ((MACH ORBIS-MACHS) RESERVED) 25 26)
(dnf f-resv-25-10 "resv-25-10" ((MACH ORBIS-MACHS) RESERVED) 25 10)
(dnf f-resv-25-5 "resv-25-5" ((MACH ORBIS-MACHS) RESERVED) 25 5)
(dnf f-resv-23-8 "resv-23-8" ((MACH ORBIS-MACHS) RESERVED) 23 8)
(dnf f-resv-20-21 "resv-20-21" ((MACH ORBIS-MACHS) RESERVED) 20 21)
(dnf f-resv-20-5 "resv-20-5" ((MACH ORBIS-MACHS) RESERVED) 20 5)
(dnf f-resv-20-4 "resv-20-4" ((MACH ORBIS-MACHS) RESERVED) 20 4)
(dnf f-resv-15-8 "resv-15-8" ((MACH ORBIS-MACHS) RESERVED) 15 8)
(dnf f-resv-15-6 "resv-15-6" ((MACH ORBIS-MACHS) RESERVED) 15 6)
(dnf f-resv-10-11 "resv-10-11" ((MACH ORBIS-MACHS) RESERVED) 10 11)
(dnf f-resv-10-7 "resv-10-7" ((MACH ORBIS-MACHS) RESERVED) 10 7)
(dnf f-resv-10-3 "resv-10-3" ((MACH ORBIS-MACHS) RESERVED) 10 3)
(dnf f-resv-10-1 "resv-10-1" ((MACH ORBIS-MACHS) RESERVED) 10 1)
(dnf f-resv-7-4 "resv-7-4" ((MACH ORBIS-MACHS) RESERVED) 7 4)
(dnf f-resv-5-2 "resv-5-2" ((MACH ORBIS-MACHS) RESERVED) 5 2)
(dnf f-imm16-25-5 "imm16-25-5" ((MACH ORBIS-MACHS)) 25 5)
(dnf f-imm16-10-11 "imm16-10-11" ((MACH ORBIS-MACHS)) 10 11)
; PC relative, 26-bit (2 shifted to right)
(df f-disp26
"disp26"
((MACH ORBIS-MACHS) PCREL-ADDR)
25
26
INT
or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05 10:41:41 +08:00
((value pc) (sra IAI (sub IAI value pc) (const 2)))
((value pc) (add IAI (sll IAI value (const 2)) pc))
)
or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05 10:41:41 +08:00
; PC relative, 21-bit, 13 shifted to right, aligned.
; Note that the alignment means that we can't simplify relocations in the
; same way as we do for pc-relative, so we use ABS-ADDR instead of PCREL-ADDR.
(df f-disp21
"disp21"
((MACH ORBIS-MACHS) ABS-ADDR)
20
21
INT
((value pc)
(sub IAI (sra IAI value (const 13)) (sra IAI pc (const 13))))
((value pc)
(sll IAI (add IAI value (sra IAI pc (const 13))) (const 13)))
)
; Immediates.
(dnf f-uimm16 "uimm16" ((MACH ORBIS-MACHS)) 15 16)
(df f-simm16 "simm16" ((MACH ORBIS-MACHS) SIGN-OPT) 15 16 INT #f #f)
(dnf f-uimm6 "uimm6" ((MACH ORBIS-MACHS)) 5 6) ;; shroti
(define-multi-ifield
(name f-uimm16-split)
(comment "16-bit split unsigned immediate")
(attrs (MACH ORBIS-MACHS))
(mode UINT)
(subfields f-imm16-25-5 f-imm16-10-11)
(insert (sequence ()
(set (ifield f-imm16-25-5)
(and (srl (ifield f-uimm16-split)
(const 11))
(const #x1f)))
(set (ifield f-imm16-10-11)
(and (ifield f-uimm16-split)
(const #x7ff)))))
(extract
(set (ifield f-uimm16-split)
(trunc UHI
(or (sll (ifield f-imm16-25-5)
(const 11))
(ifield f-imm16-10-11)))))
)
(define-multi-ifield
(name f-simm16-split)
(comment "16-bit split signed immediate")
(attrs (MACH ORBIS-MACHS) SIGN-OPT)
(mode INT)
(subfields f-imm16-25-5 f-imm16-10-11)
(insert (sequence ()
(set (ifield f-imm16-25-5)
(and (sra (ifield f-simm16-split)
(const 11))
(const #x1f)))
(set (ifield f-imm16-10-11)
(and (ifield f-simm16-split)
(const #x7ff)))))
(extract
(set (ifield f-simm16-split)
(trunc HI
(or (sll (ifield f-imm16-25-5)
(const 11))
(ifield f-imm16-10-11)))))
)
; Enums.
; insn-opcode: bits 31-26
(define-normal-insn-enum
insn-opcode "insn main opcode enums" ((MACH ORBIS-MACHS)) OPC_ f-opcode
(("J" #x00)
("JAL" #x01)
or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05 10:41:41 +08:00
("ADRP" #x02)
("BNF" #x03)
("BF" #x04)
("NOP" #x05)
("MOVHIMACRC" #x06)
("SYSTRAPSYNCS" #x08)
("RFE" #x09)
("VECTOR" #x0a)
("JR" #x11)
("JALR" #x12)
("MACI" #x13)
("LWA" #x1b)
("CUST1" #x1c)
("CUST2" #x1d)
("CUST3" #x1e)
("CUST4" #x1f)
("LD" #x20)
("LWZ" #x21)
("LWS" #x22)
("LBZ" #x23)
("LBS" #x24)
("LHZ" #x25)
("LHS" #x26)
("ADDI" #x27)
("ADDIC" #x28)
("ANDI" #x29)
("ORI" #x2a)
("XORI" #x2b)
("MULI" #x2c)
("MFSPR" #x2d)
("SHROTI" #x2e)
("SFI" #x2f)
("MTSPR" #x30)
("MAC" #x31)
("FLOAT" #x32)
("SWA" #x33)
("SD" #x34)
("SW" #x35)
("SB" #x36)
("SH" #x37)
("ALU" #x38)
("SF" #x39)
("CUST5" #x3c)
("CUST6" #x3d)
("CUST7" #x3e)
("CUST8" #x3f)
)
)
(define-normal-insn-enum insn-opcode-systrapsyncs
"systrapsync insn opcode enums" ((MACH ORBIS-MACHS))
OPC_SYSTRAPSYNCS_ f-op-25-5
(("SYSCALL" #x00 )
("TRAP" #x08 )
("MSYNC" #x10 )
("PSYNC" #x14 )
("CSYNC" #x18 )
)
)
(define-normal-insn-enum insn-opcode-movehimacrc
"movhi/macrc insn opcode enums" ((MACH ORBIS-MACHS))
OPC_MOVHIMACRC_ f-op-16-1
(("MOVHI" #x0)
("MACRC" #x1)
)
)
(define-normal-insn-enum insn-opcode-mac
"multiply/accumulate insn opcode enums" ((MACH ORBIS-MACHS))
OPC_MAC_ f-op-3-4
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
(("MAC" #x1)
("MSB" #x2)
("MACU" #x3)
("MSBU" #x4)
)
)
(define-normal-insn-enum insn-opcode-shorts
"shift/rotate insn opcode enums" ((MACH ORBIS-MACHS))
OPC_SHROTS_ f-op-7-2
(("SLL" #x0 )
("SRL" #x1 )
("SRA" #x2 )
("ROR" #x3 )
)
)
(define-normal-insn-enum insn-opcode-extbhs
"extend byte/half opcode enums" ((MACH ORBIS-MACHS))
OPC_EXTBHS_ f-op-9-4
(("EXTHS" #x0)
("EXTBS" #x1)
("EXTHZ" #x2)
("EXTBZ" #x3)
)
)
(define-normal-insn-enum insn-opcode-extws
"extend word opcode enums" ((MACH ORBIS-MACHS))
OPC_EXTWS_ f-op-9-4
(("EXTWS" #x0)
("EXTWZ" #x1)
)
)
(define-normal-insn-enum insn-opcode-alu-regreg
"alu reg/reg insn opcode enums" ((MACH ORBIS-MACHS))
OPC_ALU_REGREG_ f-op-3-4
(("ADD" #x0)
("ADDC" #x1)
("SUB" #x2)
("AND" #x3)
("OR" #x4)
("XOR" #x5)
("MUL" #x6)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
("MULD" #x7)
("SHROT" #x8)
("DIV" #x9)
("DIVU" #xA)
("MULU" #xB)
("EXTBH" #xC)
("EXTW" #xD)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
("MULDU" #xD)
("CMOV" #xE)
("FFL1" #xF)
)
)
(define-normal-insn-enum insn-opcode-setflag
"setflag insn opcode enums" ((MACH ORBIS-MACHS))
OPC_SF_ f-op-25-5
(("EQ" #x00)
("NE" #x01)
("GTU" #x02)
("GEU" #x03)
("LTU" #x04)
("LEU" #x05)
("GTS" #x0A)
("GES" #x0B)
("LTS" #x0C)
("LES" #x0D)
)
)
; Instruction operands.
(dnop sys-sr "supervision register" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr f-nil)
(dnop sys-esr0 "exception supervision register 0" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-esr0 f-nil)
(dnop sys-epcr0 "exception PC register 0" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-epcr0 f-nil)
(dnop sys-sr-lee "SR little endian enable bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr-lee f-nil)
(dnop sys-sr-f "SR flag bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr-f f-nil)
(dnop sys-sr-cy "SR carry bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr-cy f-nil)
(dnop sys-sr-ov "SR overflow bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr-ov f-nil)
(dnop sys-sr-ove "SR overflow exception enable bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-sr-ove f-nil)
(dnop sys-cpucfgr-ob64s "CPUCFGR ORBIS64 supported bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-cpucfgr-ob64s f-nil)
(dnop sys-cpucfgr-nd "CPUCFGR no delay bit" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-cpucfgr-nd f-nil)
(dnop sys-fpcsr-rm "floating point round mode" ((MACH ORBIS-MACHS) SEM-ONLY) h-sys-fpcsr-rm f-nil)
(dnop mac-machi "MAC HI result register" ((MACH ORBIS-MACHS) SEM-ONLY) h-mac-machi f-nil)
(dnop mac-maclo "MAC LO result register" ((MACH ORBIS-MACHS) SEM-ONLY) h-mac-maclo f-nil)
(dnop atomic-reserve "atomic reserve flag" ((MACH ORBIS-MACHS) SEM-ONLY) h-atomic-reserve f-nil)
(dnop atomic-address "atomic address" ((MACH ORBIS-MACHS) SEM-ONLY) h-atomic-address f-nil)
(dnop uimm6 "uimm6" ((MACH ORBIS-MACHS)) h-uimm6 f-uimm6)
(dnop rD "destination register" ((MACH ORBIS-MACHS)) h-gpr f-r1)
(dnop rA "source register A" ((MACH ORBIS-MACHS)) h-gpr f-r2)
(dnop rB "source register B" ((MACH ORBIS-MACHS)) h-gpr f-r3)
(define-operand
(name disp26)
(comment "pc-rel 26 bit")
(attrs (MACH ORBIS-MACHS))
(type h-iaddr)
(index f-disp26)
(handlers (parse "disp26"))
)
or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05 10:41:41 +08:00
(define-operand
(name disp21)
(comment "pc-rel 21 bit")
(attrs (MACH ORBIS-MACHS))
(type h-iaddr)
(index f-disp21)
(handlers (parse "disp21"))
)
(define-operand
(name simm16)
(comment "16-bit signed immediate")
(attrs (MACH ORBIS-MACHS) SIGN-OPT)
(type h-simm16)
(index f-simm16)
(handlers (parse "simm16"))
)
(define-operand
(name uimm16)
(comment "16-bit unsigned immediate")
(attrs (MACH ORBIS-MACHS))
(type h-uimm16)
(index f-uimm16)
(handlers (parse "uimm16"))
)
(define-operand
(name simm16-split)
(comment "split 16-bit signed immediate")
(attrs (MACH ORBIS-MACHS) SIGN-OPT)
(type h-simm16)
(index f-simm16-split)
or1k: Add relocations for high-signed and low-stores This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.
2018-10-05 10:41:40 +08:00
(handlers (parse "simm16_split"))
)
(define-operand
(name uimm16-split)
(comment "split 16-bit unsigned immediate")
(attrs (MACH ORBIS-MACHS))
(type h-uimm16)
(index f-uimm16-split)
or1k: Add relocations for high-signed and low-stores This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.
2018-10-05 10:41:40 +08:00
(handlers (parse "uimm16_split"))
)
; Instructions.
; Branch releated instructions
(define-pmacro (cti-link-return)
(set IAI (reg h-gpr 9) (add pc (if sys-cpucfgr-nd 4 8)))
)
(define-pmacro (cti-transfer-control condition target)
;; this mess is necessary because we're
;; skipping the delay slot, but it's
;; actually the start of the next basic
;; block
(sequence ()
(if condition
(delay 1 (set IAI pc target))
(if sys-cpucfgr-nd
(delay 1 (set IAI pc (add pc 4))))
)
(if sys-cpucfgr-nd
(skip 1)
)
)
)
(define-pmacro
(define-cti
cti-name
cti-comment
cti-attrs
cti-syntax
cti-format
cti-semantics)
(begin
(dni
cti-name
cti-comment
(.splice (MACH ORBIS-MACHS) DELAYED-CTI NOT-IN-DELAY-SLOT (.unsplice cti-attrs))
cti-syntax
cti-format
(cti-semantics)
()
)
)
)
(define-cti
l-j
"jump (pc-relative iaddr)"
(!COND-CTI UNCOND-CTI)
"l.j ${disp26}"
(+ OPC_J disp26)
(.pmacro ()
(cti-transfer-control 1 disp26)
)
)
or1k: Add the l.adrp insn and supporting relocations This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05 10:41:41 +08:00
(dni l-adrp "adrp reg/disp21"
((MACH ORBIS-MACHS))
"l.adrp $rD,${disp21}"
(+ OPC_ADRP rD disp21)
(set UWI rD disp21)
()
)
(define-cti
l-jal
"jump and link (pc-relative iaddr)"
(!COND-CTI UNCOND-CTI)
"l.jal ${disp26}"
(+ OPC_JAL disp26)
(.pmacro ()
(sequence ()
(cti-link-return)
(cti-transfer-control 1 disp26)
)
)
)
(define-cti
l-jr
"jump register (absolute iaddr)"
(!COND-CTI UNCOND-CTI)
"l.jr $rB"
(+ OPC_JR (f-resv-25-10 0) rB (f-resv-10-11 0))
(.pmacro ()
(cti-transfer-control 1 rB)
)
)
(define-cti
l-jalr
"jump register and link (absolute iaddr)"
(!COND-CTI UNCOND-CTI)
"l.jalr $rB"
(+ OPC_JALR (f-resv-25-10 0) rB (f-resv-10-11 0) )
(.pmacro ()
(sequence ()
(cti-link-return)
(cti-transfer-control 1 rB)
)
)
)
(define-cti
l-bnf
"branch if condition bit not set (pc relative iaddr)"
(COND-CTI !UNCOND-CTI)
"l.bnf ${disp26}"
(+ OPC_BNF disp26)
(.pmacro ()
(cti-transfer-control (not sys-sr-f) disp26)
)
)
(define-cti
l-bf
"branch if condition bit set (pc relative iaddr)"
(COND-CTI !UNCOND-CTI)
"l.bf ${disp26}"
(+ OPC_BF disp26)
(.pmacro ()
(cti-transfer-control sys-sr-f disp26)
)
)
(dni l-trap "trap (exception)"
((MACH ORBIS-MACHS) NOT-IN-DELAY-SLOT)
"l.trap ${uimm16}"
(+ OPC_SYSTRAPSYNCS OPC_SYSTRAPSYNCS_TRAP (f-resv-20-5 0) uimm16)
; Do exception entry handling in C function, PC set based on SR state
(raise-exception EXCEPT-TRAP)
()
)
(dni l-sys "syscall (exception)"
; This function may not be in delay slot
((MACH ORBIS-MACHS) NOT-IN-DELAY-SLOT)
"l.sys ${uimm16}"
(+ OPC_SYSTRAPSYNCS OPC_SYSTRAPSYNCS_SYSCALL (f-resv-20-5 0) uimm16)
; Do exception entry handling in C function, PC set based on SR state
(raise-exception EXCEPT-SYSCALL)
()
)
(dni l-msync "memory sync"
((MACH ORBIS-MACHS))
"l.msync"
(+ OPC_SYSTRAPSYNCS OPC_SYSTRAPSYNCS_MSYNC (f-resv-20-21 0))
(nop)
()
)
(dni l-psync "pipeline sync"
((MACH ORBIS-MACHS))
"l.psync"
(+ OPC_SYSTRAPSYNCS OPC_SYSTRAPSYNCS_PSYNC (f-resv-20-21 0))
(nop)
()
)
(dni l-csync "context sync"
((MACH ORBIS-MACHS))
"l.csync"
(+ OPC_SYSTRAPSYNCS OPC_SYSTRAPSYNCS_CSYNC (f-resv-20-21 0))
(nop)
()
)
(dni l-rfe "return from exception"
; This function may not be in delay slot
((MACH ORBIS-MACHS) NOT-IN-DELAY-SLOT FORCED-CTI)
"l.rfe"
(+ OPC_RFE (f-resv-25-26 0))
(c-call VOID "@cpu@_rfe")
()
)
; Misc instructions
; l.nop with immediate must be first so it handles all l.nops in sim
(dni l-nop-imm "nop uimm16"
((MACH ORBIS-MACHS))
"l.nop ${uimm16}"
(+ OPC_NOP (f-op-25-2 #x1) (f-resv-23-8 0) uimm16)
(c-call VOID "@cpu@_nop" (zext UWI uimm16))
()
)
(if (application-is? SIMULATOR)
(begin)
(begin
(dni l-nop "nop"
((MACH ORBIS-MACHS))
"l.nop"
(+ OPC_NOP (f-op-25-2 #x1) (f-resv-23-8 0) uimm16)
(nop)
()
)
)
)
(dni l-movhi "movhi reg/uimm16"
((MACH ORBIS-MACHS))
"l.movhi $rD,$uimm16"
(+ OPC_MOVHIMACRC rD (f-resv-20-4 0) OPC_MOVHIMACRC_MOVHI uimm16)
(set UWI rD (sll UWI (zext UWI uimm16) (const 16)))
()
)
(dni l-macrc "macrc reg"
((MACH ORBIS-MACHS))
"l.macrc $rD"
(+ OPC_MOVHIMACRC rD (f-resv-20-4 0) OPC_MOVHIMACRC_MACRC (f-uimm16 0))
(sequence ()
(set UWI rD mac-maclo)
(set UWI mac-maclo 0)
(set UWI mac-machi 0)
)
()
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
)
; System releated instructions
(dni l-mfspr "mfspr"
((MACH ORBIS-MACHS))
"l.mfspr $rD,$rA,${uimm16}"
(+ OPC_MFSPR rD rA uimm16)
(set UWI rD (c-call UWI "@cpu@_mfspr" (or rA (zext UWI uimm16))))
()
)
(dni l-mtspr "mtspr"
((MACH ORBIS-MACHS))
"l.mtspr $rA,$rB,${uimm16-split}"
(+ OPC_MTSPR rA rB uimm16-split )
(c-call VOID "@cpu@_mtspr" (or rA (zext WI uimm16-split)) rB)
()
)
; Load instructions
(define-pmacro (load-store-addr base offset size)
(c-call AI "@cpu@_make_load_store_addr" base (ext SI offset) size))
(dni l-lwz "l.lwz reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lwz $rD,${simm16}($rA)"
(+ OPC_LWZ rD rA simm16)
(set UWI rD (zext UWI (mem USI (load-store-addr rA simm16 4))))
()
)
(dni l-lws "l.lws reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lws $rD,${simm16}($rA)"
(+ OPC_LWS rD rA simm16)
(set WI rD (ext WI (mem SI (load-store-addr rA simm16 4))))
()
)
(dni l-lwa "l.lwa reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lwa $rD,${simm16}($rA)"
(+ OPC_LWA rD rA simm16)
(sequence ()
(set UWI rD (zext UWI (mem USI (load-store-addr rA simm16 4))))
(set atomic-reserve (const 1))
(set atomic-address (load-store-addr rA simm16 4))
)
()
)
(dni l-lbz "l.lbz reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lbz $rD,${simm16}($rA)"
(+ OPC_LBZ rD rA simm16)
(set UWI rD (zext UWI (mem UQI (load-store-addr rA simm16 1))))
()
)
(dni l-lbs "l.lbs reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lbs $rD,${simm16}($rA)"
(+ OPC_LBS rD rA simm16)
(set WI rD (ext WI (mem QI (load-store-addr rA simm16 1))))
()
)
(dni l-lhz "l.lhz reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lhz $rD,${simm16}($rA)"
(+ OPC_LHZ rD simm16 rA)
(set UWI rD (zext UWI (mem UHI (load-store-addr rA simm16 2))))
()
)
(dni l-lhs "l.lhs reg/simm16(reg)"
((MACH ORBIS-MACHS))
"l.lhs $rD,${simm16}($rA)"
(+ OPC_LHS rD rA simm16)
(set WI rD (ext WI (mem HI (load-store-addr rA simm16 2))))
()
)
; Store instructions
(define-pmacro (store-insn mnemonic opc-op mode size)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " simm16(reg)/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " ${simm16-split}($rA),$rB")
(+ opc-op rA rB simm16-split)
(sequence ((SI addr))
(set addr (load-store-addr rA simm16-split size))
(set mode (mem mode addr) (trunc mode rB))
(if (eq (and addr #xffffffc) atomic-address)
(set atomic-reserve (const 0))
)
)
()
)
)
)
(store-insn sw OPC_SW USI 4)
(store-insn sb OPC_SB UQI 1)
(store-insn sh OPC_SH UHI 2)
(dni l-swa "l.swa simm16(reg)/reg"
((MACH ORBIS-MACHS))
"l.swa ${simm16-split}($rA),$rB"
(+ OPC_SWA rA rB simm16)
(sequence ((SI addr) (BI flag))
(set addr (load-store-addr rA simm16-split 4))
(set sys-sr-f (and atomic-reserve (eq addr atomic-address)))
(if sys-sr-f
(set USI (mem USI addr) (trunc USI rB))
)
(set atomic-reserve (const 0))
)
()
)
; Shift and rotate instructions
(define-pmacro (shift-insn mnemonic)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " reg/reg/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-3 0) (.sym OPC_SHROTS_ (.upcase mnemonic)) (f-resv-5-2 0)
OPC_ALU_REGREG_SHROT )
(set UWI rD (mnemonic rA rB))
()
)
(dni (.sym l- mnemonic "i")
(.str "l." mnemonic " reg/reg/uimm6")
((MACH ORBIS-MACHS))
(.str "l." mnemonic "i $rD,$rA,${uimm6}")
(+ OPC_SHROTI rD rA (f-resv-15-8 0) (.sym OPC_SHROTS_ (.upcase mnemonic)) uimm6)
(set rD (mnemonic rA uimm6))
()
)
)
)
(shift-insn sll)
(shift-insn srl)
(shift-insn sra)
(shift-insn ror)
; Arithmetic insns
; ALU op macro
(define-pmacro (alu-insn mnemonic)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " reg/reg/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-7 0) (.sym OPC_ALU_REGREG_ (.upcase mnemonic)))
(set rD (mnemonic rA rB))
()
)
)
)
(alu-insn and)
(alu-insn or)
(alu-insn xor)
(define-pmacro (alu-carry-insn mnemonic)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " reg/reg/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-7 #x00) (.sym OPC_ALU_REGREG_ (.upcase mnemonic)))
(sequence ()
(sequence ()
(set BI sys-sr-cy ((.sym mnemonic "c-cflag") WI rA rB 0))
(set BI sys-sr-ov ((.sym mnemonic "c-oflag") WI rA rB 0))
(set rD (mnemonic WI rA rB))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
)
)
(alu-carry-insn add)
(alu-carry-insn sub)
(dni (l-addc) "l.addc reg/reg/reg"
((MACH ORBIS-MACHS))
("l.addc $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-7 #x00) OPC_ALU_REGREG_ADDC)
(sequence ()
(sequence ((BI tmp-sys-sr-cy))
(set BI tmp-sys-sr-cy sys-sr-cy)
(set BI sys-sr-cy (addc-cflag WI rA rB tmp-sys-sr-cy))
(set BI sys-sr-ov (addc-oflag WI rA rB tmp-sys-sr-cy))
(set rD (addc WI rA rB tmp-sys-sr-cy))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
(dni (l-mul) "l.mul reg/reg/reg"
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
((MACH ORBIS-MACHS))
("l.mul $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_MUL)
(sequence ()
(sequence ()
(set BI sys-sr-ov (mul-o2flag WI rA rB))
(set rD (mul WI rA rB))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
(dni (l-muld) "l.muld reg/reg"
((MACH ORBIS-MACHS))
("l.muld $rA,$rB")
(+ OPC_ALU (f-resv-25-5 0) rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_MULD)
(sequence ((DI result))
(set DI result (mul DI (ext DI rA) (ext DI rB)))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
)
()
)
(dni (l-mulu) "l.mulu reg/reg/reg"
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
((MACH ORBIS-MACHS))
("l.mulu $rD,$rA,$rB")
(+ OPC_ALU rD rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_MULU)
(sequence ()
(sequence ()
(set BI sys-sr-cy (mul-o1flag UWI rA rB))
(set rD (mul UWI rA rB))
)
(if (andif sys-sr-cy sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
(dni (l-muldu) "l.muld reg/reg"
((MACH ORBIS-MACHS))
("l.muldu $rA,$rB")
(+ OPC_ALU (f-resv-25-5 0) rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_MULDU)
(sequence ((DI result))
(set DI result (mul DI (zext DI rA) (zext DI rB)))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
)
()
)
(dni l-div "divide (signed)"
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
((MACH ORBIS-MACHS))
"l.div $rD,$rA,$rB"
(+ OPC_ALU rD rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_DIV)
(if (ne rB 0)
(sequence ()
(set BI sys-sr-ov 0)
(set WI rD (div WI rA rB))
)
(sequence ()
(set BI sys-sr-ov 1)
(if sys-sr-ove
(raise-exception EXCEPT-RANGE))
)
)
()
)
(dni l-divu "divide (unsigned)"
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
((MACH ORBIS-MACHS))
"l.divu $rD,$rA,$rB"
(+ OPC_ALU rD rA rB (f-resv-10-7 #x30) OPC_ALU_REGREG_DIVU)
(if (ne rB 0)
(sequence ()
(set BI sys-sr-cy 0)
(set rD (udiv UWI rA rB))
)
(sequence ()
(set BI sys-sr-cy 1)
(if sys-sr-ove
(raise-exception EXCEPT-RANGE))
)
)
()
)
(dni l-ff1 "find first '1'"
((MACH ORBIS-MACHS))
"l.ff1 $rD,$rA"
(+ OPC_ALU rD rA rB (f-resv-10-7 #x00) OPC_ALU_REGREG_FFL1)
(set rD (c-call UWI "@cpu@_ff1" rA))
()
)
(dni l-fl1 "find last '1'"
((MACH ORBIS-MACHS))
"l.fl1 $rD,$rA"
(+ OPC_ALU rD rA rB (f-resv-10-7 #x10) OPC_ALU_REGREG_FFL1)
(set rD (c-call UWI "@cpu@_fl1" rA))
()
)
(define-pmacro (alu-insn-simm mnemonic)
(begin
(dni (.sym l- mnemonic "i")
(.str "l." mnemonic " reg/reg/simm16")
((MACH ORBIS-MACHS))
(.str "l." mnemonic "i $rD,$rA,$simm16")
(+ (.sym OPC_ (.upcase mnemonic) "I") rD rA simm16)
(set rD (mnemonic rA (ext WI simm16)))
()
)
)
)
(define-pmacro (alu-insn-uimm mnemonic)
(begin
(dni (.sym l- mnemonic "i")
(.str "l." mnemonic " reg/reg/uimm16")
((MACH ORBIS-MACHS))
(.str "l." mnemonic "i $rD,$rA,$uimm16")
(+ (.sym OPC_ (.upcase mnemonic) "I") rD rA uimm16)
(set rD (mnemonic rA (zext UWI uimm16)))
()
)
)
)
(alu-insn-uimm and)
(alu-insn-uimm or)
(alu-insn-simm xor)
(define-pmacro (alu-carry-insn-simm mnemonic)
(begin
(dni (.sym l- mnemonic "i")
(.str "l." mnemonic "i reg/reg/simm16")
((MACH ORBIS-MACHS))
(.str "l." mnemonic "i $rD,$rA,$simm16")
(+ (.sym OPC_ (.upcase mnemonic) "I") rD rA simm16)
(sequence ()
(sequence ()
(set BI sys-sr-cy ((.sym mnemonic "c-cflag") WI rA (ext WI simm16) 0))
(set BI sys-sr-ov ((.sym mnemonic "c-oflag") WI rA (ext WI simm16) 0))
(set rD (mnemonic WI rA (ext WI simm16)))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
)
)
(alu-carry-insn-simm add)
(dni (l-addic)
("l.addic reg/reg/simm16")
((MACH ORBIS-MACHS))
("l.addic $rD,$rA,$simm16")
(+ OPC_ADDIC rD rA simm16)
(sequence ()
(sequence ((BI tmp-sys-sr-cy))
(set BI tmp-sys-sr-cy sys-sr-cy)
(set BI sys-sr-cy (addc-cflag WI rA (ext WI simm16) tmp-sys-sr-cy))
(set BI sys-sr-ov (addc-oflag WI rA (ext WI simm16) tmp-sys-sr-cy))
(set WI rD (addc WI rA (ext WI simm16) tmp-sys-sr-cy))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
(dni (l-muli)
"l.muli reg/reg/simm16"
((MACH ORBIS-MACHS))
("l.muli $rD,$rA,$simm16")
(+ OPC_MULI rD rA simm16)
(sequence ()
(sequence ()
(set sys-sr-ov (mul-o2flag WI rA (ext WI simm16)))
(set rD (mul WI rA (ext WI simm16)))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
)
(define-pmacro (extbh-insn mnemonic extop extmode truncmode)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " reg/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " $rD,$rA")
(+ OPC_ALU rD rA (f-resv-15-6 0) (.sym OPC_EXTBHS_ (.upcase mnemonic)) (f-resv-5-2 0) OPC_ALU_REGREG_EXTBH)
(set rD (extop extmode (trunc truncmode rA)))
()
)
)
)
(extbh-insn exths ext WI HI)
(extbh-insn extbs ext WI QI)
(extbh-insn exthz zext UWI UHI)
(extbh-insn extbz zext UWI UQI)
(define-pmacro (extw-insn mnemonic extop extmode truncmode)
(begin
(dni (.sym l- mnemonic)
(.str "l." mnemonic " reg/reg")
((MACH ORBIS-MACHS))
(.str "l." mnemonic " $rD,$rA")
(+ OPC_ALU rD rA (f-resv-15-6 0) (.sym OPC_EXTWS_ (.upcase mnemonic)) (f-resv-5-2 0) OPC_ALU_REGREG_EXTW)
(set rD (extop extmode (trunc truncmode rA)))
()
)
)
)
(extw-insn extws ext WI SI)
(extw-insn extwz zext USI USI)
(dni l-cmov
"l.cmov reg/reg/reg"
((MACH ORBIS-MACHS))
"l.cmov $rD,$rA,$rB"
(+ OPC_ALU rD rA rB (f-resv-10-1 0) (f-op-9-2 0) (f-resv-7-4 0) OPC_ALU_REGREG_CMOV)
(if sys-sr-f
(set UWI rD rA)
(set UWI rD rB)
)
()
)
; Compare instructions
; Ordering compare
(define-pmacro (sf-insn op)
(begin
(dni (.sym l- "sf" op "s") ; l-sfgts
(.str "l.sf" op "s reg/reg") ; "l.sfgts reg/reg"
((MACH ORBIS-MACHS))
(.str "l.sf" op "s $rA,$rB") ; "l.sfgts $rA,$rB"
(+ OPC_SF (.sym "OPC_SF_" (.upcase op) "S") rA rB (f-resv-10-11 0)) ; (+ OPC_SF OPC_SF_GTS rA rB (f-resv-10-11 0))
(set sys-sr-f (op WI rA rB)) ; (set sys-sr-f (gt WI rA rB))
()
)
(dni (.sym l- "sf" op "si") ; l-sfgtsi
(.str "l.sf" op "si reg/simm16") ; "l.sfgtsi reg/simm16"
((MACH ORBIS-MACHS))
(.str "l.sf" op "si $rA,$simm16") ; "l.sfgtsi $rA,$simm16"
(+ OPC_SFI (.sym "OPC_SF_" (.upcase op) "S") rA simm16) ; (+ OPC_SFI OPC_SF_GTS rA simm16)
(set sys-sr-f (op WI rA (ext WI simm16))) ; (set sys-sr-f (gt WI rA (ext WI simm16)))
()
)
(dni (.sym l- "sf" op "u") ; l-sfgtu
(.str "l.sf" op "u reg/reg") ; "l.sfgtu reg/reg"
((MACH ORBIS-MACHS))
(.str "l.sf" op "u $rA,$rB") ; "l.sfgtu $rA,$rB"
(+ OPC_SF (.sym "OPC_SF_" (.upcase op) "U") rA rB (f-resv-10-11 0)) ; (+ OPC_SF OPC_SF_GTU rA rB (f-resv-10-11 0))
(set sys-sr-f ((.sym op "u") WI rA rB)) ; (set sys-sr-f (gtu WI rA rB))
()
)
; immediate is sign extended even for unsigned compare
(dni (.sym l- "sf" op "ui") ; l-sfgtui
(.str "l.sf" op "ui reg/simm16") ; "l.sfgtui reg/uimm16"
((MACH ORBIS-MACHS))
(.str "l.sf" op "ui $rA,$simm16") ; "l.sfgtui $rA,$simm16"
(+ OPC_SFI (.sym "OPC_SF_" (.upcase op) "U") rA simm16) ; (+ OPC_SFI OPC_SF_GTU rA simm16)
(set sys-sr-f ((.sym op "u") WI rA (ext WI simm16))) ; (set sys-sr-f (gtu WI rA (ext WI simm16)))
()
)
)
)
(sf-insn gt)
(sf-insn ge)
(sf-insn lt)
(sf-insn le)
; Equality compare
(define-pmacro (sf-insn-eq op)
(begin
(dni (.sym l- "sf" op)
(.str "l." op " reg/reg")
((MACH ORBIS-MACHS))
(.str "l.sf" op " $rA,$rB")
(+ OPC_SF (.sym "OPC_SF_" (.upcase op)) rA rB (f-resv-10-11 0))
(set sys-sr-f (op WI rA rB))
()
)
(dni (.sym l- "sf" op "i")
(.str "l.sf" op "i reg/simm16")
((MACH ORBIS-MACHS))
(.str "l.sf" op "i $rA,$simm16")
(+ OPC_SFI (.sym "OPC_SF_" (.upcase op)) rA simm16)
(set sys-sr-f (op WI rA (ext WI simm16)))
()
)
)
)
(sf-insn-eq eq)
(sf-insn-eq ne)
(dni l-mac
"l.mac reg/reg"
((MACH ORBIS-MACHS))
"l.mac $rA,$rB"
(+ OPC_MAC (f-op-25-5 0) rA rB (f-resv-10-7 0) OPC_MAC_MAC)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
(sequence ()
(sequence ((DI prod) (DI mac) (DI result))
(set DI prod (mul DI (ext DI rA) (ext DI rB)))
(set DI mac (join DI SI mac-machi mac-maclo))
(set DI result (add prod mac))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
(set BI sys-sr-ov (addc-oflag prod mac 0))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
)
(dni l-maci
"l.maci reg/simm16"
((MACH ORBIS-MACHS))
"l.maci $rA,${simm16}"
(+ OPC_MACI (f-resv-25-5 0) rA simm16)
(sequence ()
(sequence ((DI prod) (DI mac) (DI result))
(set DI prod (mul DI (ext DI rA) (ext DI simm16)))
(set DI mac (join DI SI mac-machi mac-maclo))
(set DI result (add mac prod))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
(set BI sys-sr-ov (addc-oflag prod mac 0))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
()
)
(dni l-macu
"l.macu reg/reg"
((MACH ORBIS-MACHS))
"l.macu $rA,$rB"
(+ OPC_MAC (f-op-25-5 0) rA rB (f-resv-10-7 0) OPC_MAC_MACU)
(sequence ()
(sequence ((DI prod) (DI mac) (DI result))
(set DI prod (mul DI (zext DI rA) (zext DI rB)))
(set DI mac (join DI SI mac-machi mac-maclo))
(set DI result (add prod mac))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
(set BI sys-sr-cy (addc-cflag prod mac 0))
)
(if (andif sys-sr-cy sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
()
)
(dni l-msb
"l.msb reg/reg"
((MACH ORBIS-MACHS))
"l.msb $rA,$rB"
(+ OPC_MAC (f-op-25-5 0) rA rB (f-resv-10-7 0) OPC_MAC_MSB)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
(sequence ()
(sequence ((DI prod) (DI mac) (DI result))
(set DI prod (mul DI (ext DI rA) (ext DI rB)))
(set DI mac (join DI SI mac-machi mac-maclo))
(set DI result (sub mac prod))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
(set BI sys-sr-ov (subc-oflag mac result 0))
)
(if (andif sys-sr-ov sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
()
)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
(dni l-msbu
"l.msbu reg/reg"
((MACH ORBIS-MACHS))
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
"l.msbu $rA,$rB"
(+ OPC_MAC (f-op-25-5 0) rA rB (f-resv-10-7 0) OPC_MAC_MSBU)
(sequence ()
(sequence ((DI prod) (DI mac) (DI result))
(set DI prod (mul DI (zext DI rA) (zext DI rB)))
(set DI mac (join DI SI mac-machi mac-maclo))
(set DI result (sub mac prod))
(set SI mac-machi (subword SI result 0))
(set SI mac-maclo (subword SI result 1))
(set BI sys-sr-cy (subc-cflag mac result 0))
)
(if (andif sys-sr-cy sys-sr-ove)
(raise-exception EXCEPT-RANGE))
)
or1k: Add the l.muld, l.muldu, l.macu, l.msbu insns Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
2018-10-05 10:41:41 +08:00
()
)
(define-pmacro (cust-insn cust-num)
(begin
(dni (.sym l- "cust" cust-num)
(.str "l.cust" cust-num)
((MACH ORBIS-MACHS))
(.str "l.cust" cust-num)
(+ (.sym OPC_CUST cust-num) (f-resv-25-26 0))
(nop)
()
)
)
)
(cust-insn "1")
(cust-insn "2")
(cust-insn "3")
(cust-insn "4")
(cust-insn "5")
(cust-insn "6")
(cust-insn "7")
(cust-insn "8")