2022-01-01 22:56:03 +08:00
|
|
|
/* Copyright (C) 2018-2022 Free Software Foundation, Inc.
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
2019-05-06 10:29:24 +08:00
|
|
|
#include "gdbsupport/common-defs.h"
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
#include "riscv.h"
|
|
|
|
#include <stdlib.h>
|
2018-11-29 23:51:58 +08:00
|
|
|
#include <unordered_map>
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
|
|
|
#include "../features/riscv/32bit-cpu.c"
|
|
|
|
#include "../features/riscv/64bit-cpu.c"
|
|
|
|
#include "../features/riscv/32bit-fpu.c"
|
|
|
|
#include "../features/riscv/64bit-fpu.c"
|
gdb/riscv: rewrite target description validation, add rv32e support
This commit started as adding rv32e support to gdb. The rv32e
architecture is a cut-down rv32i, it only has 16 x-registers compared
to the usual 32, and an rv32e target should not have any floating
point registers.
In order to add this I needed to adjust the target description
validation checks that are performed from riscv_gdbarch_init, and I
finally got fed up with the current scheme of doing these checks and
rewrote this code.
Unfortunately the rv32e changes are currently mixed in with the
rewrite of the validation scheme. I could split these apart if anyone
is really interested in seeing these two ideas as separate patches.
The main idea behind this change is that where previously I tried to
have a purely data driven approach, a set of tables one for each
expected feature, and then a single generic function that would
validate a feature given a table, I have created a new class for each
feature. Each class has its own check member function which allows
the logic for how to check each feature to be different. I think the
new scheme is much easier to follow.
There are some other changes that I made to the validation code as
part of this commit.
I've relaxed some of the checks related to the floating point CSRs.
Previously the 3 CSRs fflags, frm, and fcsr all had to be present in
either the fpu feature or the csr feature. This requirement is now
relaxed, if the CSRs are not present then gdb will not reject the
target description. My thinking here is that there's no gdb
functionality that specifically requires these registers, and so, if a
target offers a description without these registers nothing else in
gdb should stop working.
And as part of the rv32e support targets now only have to provide the
first 16 x-registers and $pc. The second half of the x-registers (x16
-> x31) are now optional.
gdb/ChangeLog:
* arch/riscv.c: Include 'rv32e-xregs.c'.
(riscv_create_target_description): Update to handle rv32e.
* arch/riscv.h (struct riscv_gdbarch_features) <embedded>: New
member variable.
<operator==>: Update to account for new field.
<hash>: Likewise.
* features/Makefile (FEATURE_XMLFILES): Add riscv/rv32e-xregs.xml.
* features/riscv/rv32e-xregs.c: Generated.
* features/riscv/rv32e-xregs.xml: New file.
* riscv-tdep.c (riscv_debug_breakpoints): Move from later in the
file.
(riscv_debug_infcall): Likewise.
(riscv_debug_unwinder): Likewise.
(riscv_debug_gdbarch): Likewise.
(enum riscv_register_required_status): Delete.
(struct riscv_register_feature): Add constructor, delete default
constructor, copy, and assign constructors.
(struct riscv_register_feature::register_info) <required>: Delete.
<check>: Update comment and arguments.
(struct riscv_register_feature) <name>: Change to member function.
<prefer_first_name>: Delete.
<tdesc_feature>: New member function.
<registers>: Rename to...
<m_registers>: ...this.
<m_feature_name>: New member variable.
(riscv_register_feature::register_info::check): Update arguments.
(riscv_xreg_feature): Rewrite as class, create a single static
instance of the class.
(riscv_freg_feature): Likewise.
(riscv_virtual_feature): Likewise.
(riscv_csr_feature): Likewise.
(riscv_create_csr_aliases): Has become a member function inside
riscv_csr_feature class.
(riscv_abi_embedded): New function definition.
(riscv_register_name): Adjust to use new feature objects.
(struct riscv_call_info) <riscv_call_info>: Check for rv32e abi,
and adjust available argument registers.
(riscv_features_from_gdbarch_info): Check for EF_RISCV_RVE flag.
(riscv_check_tdesc_feature): Delete.
(riscv_tdesc_unknown_reg): Adjust to use new feature objects.
(riscv_gdbarch_init): Delete target description checking code, and
instead call to the new feature objects to perform the checks.
Reorder handling of no abi information case, allows small code
simplification.
(_initialize_riscv_tdep): Remove call, this is now done in the
riscv_csr_feature constructor.
* riscv-tdep.h (riscv_abi_embedded): Declare.
2020-11-24 02:03:32 +08:00
|
|
|
#include "../features/riscv/rv32e-xregs.c"
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
#ifndef GDBSERVER
|
|
|
|
#define STATIC_IN_GDB static
|
|
|
|
#else
|
|
|
|
#define STATIC_IN_GDB
|
|
|
|
#endif
|
2018-11-29 23:51:58 +08:00
|
|
|
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
/* See arch/riscv.h. */
|
|
|
|
|
2020-07-20 21:18:04 +08:00
|
|
|
STATIC_IN_GDB target_desc_up
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
riscv_create_target_description (const struct riscv_gdbarch_features features)
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
{
|
2018-11-29 23:51:58 +08:00
|
|
|
/* Now we should create a new target description. */
|
2020-07-20 21:18:04 +08:00
|
|
|
target_desc_up tdesc = allocate_target_description ();
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
|
|
|
#ifndef IN_PROCESS_AGENT
|
|
|
|
std::string arch_name = "riscv";
|
|
|
|
|
|
|
|
if (features.xlen == 4)
|
gdb/riscv: rewrite target description validation, add rv32e support
This commit started as adding rv32e support to gdb. The rv32e
architecture is a cut-down rv32i, it only has 16 x-registers compared
to the usual 32, and an rv32e target should not have any floating
point registers.
In order to add this I needed to adjust the target description
validation checks that are performed from riscv_gdbarch_init, and I
finally got fed up with the current scheme of doing these checks and
rewrote this code.
Unfortunately the rv32e changes are currently mixed in with the
rewrite of the validation scheme. I could split these apart if anyone
is really interested in seeing these two ideas as separate patches.
The main idea behind this change is that where previously I tried to
have a purely data driven approach, a set of tables one for each
expected feature, and then a single generic function that would
validate a feature given a table, I have created a new class for each
feature. Each class has its own check member function which allows
the logic for how to check each feature to be different. I think the
new scheme is much easier to follow.
There are some other changes that I made to the validation code as
part of this commit.
I've relaxed some of the checks related to the floating point CSRs.
Previously the 3 CSRs fflags, frm, and fcsr all had to be present in
either the fpu feature or the csr feature. This requirement is now
relaxed, if the CSRs are not present then gdb will not reject the
target description. My thinking here is that there's no gdb
functionality that specifically requires these registers, and so, if a
target offers a description without these registers nothing else in
gdb should stop working.
And as part of the rv32e support targets now only have to provide the
first 16 x-registers and $pc. The second half of the x-registers (x16
-> x31) are now optional.
gdb/ChangeLog:
* arch/riscv.c: Include 'rv32e-xregs.c'.
(riscv_create_target_description): Update to handle rv32e.
* arch/riscv.h (struct riscv_gdbarch_features) <embedded>: New
member variable.
<operator==>: Update to account for new field.
<hash>: Likewise.
* features/Makefile (FEATURE_XMLFILES): Add riscv/rv32e-xregs.xml.
* features/riscv/rv32e-xregs.c: Generated.
* features/riscv/rv32e-xregs.xml: New file.
* riscv-tdep.c (riscv_debug_breakpoints): Move from later in the
file.
(riscv_debug_infcall): Likewise.
(riscv_debug_unwinder): Likewise.
(riscv_debug_gdbarch): Likewise.
(enum riscv_register_required_status): Delete.
(struct riscv_register_feature): Add constructor, delete default
constructor, copy, and assign constructors.
(struct riscv_register_feature::register_info) <required>: Delete.
<check>: Update comment and arguments.
(struct riscv_register_feature) <name>: Change to member function.
<prefer_first_name>: Delete.
<tdesc_feature>: New member function.
<registers>: Rename to...
<m_registers>: ...this.
<m_feature_name>: New member variable.
(riscv_register_feature::register_info::check): Update arguments.
(riscv_xreg_feature): Rewrite as class, create a single static
instance of the class.
(riscv_freg_feature): Likewise.
(riscv_virtual_feature): Likewise.
(riscv_csr_feature): Likewise.
(riscv_create_csr_aliases): Has become a member function inside
riscv_csr_feature class.
(riscv_abi_embedded): New function definition.
(riscv_register_name): Adjust to use new feature objects.
(struct riscv_call_info) <riscv_call_info>: Check for rv32e abi,
and adjust available argument registers.
(riscv_features_from_gdbarch_info): Check for EF_RISCV_RVE flag.
(riscv_check_tdesc_feature): Delete.
(riscv_tdesc_unknown_reg): Adjust to use new feature objects.
(riscv_gdbarch_init): Delete target description checking code, and
instead call to the new feature objects to perform the checks.
Reorder handling of no abi information case, allows small code
simplification.
(_initialize_riscv_tdep): Remove call, this is now done in the
riscv_csr_feature constructor.
* riscv-tdep.h (riscv_abi_embedded): Declare.
2020-11-24 02:03:32 +08:00
|
|
|
{
|
|
|
|
if (features.embedded)
|
|
|
|
arch_name.append (":rv32e");
|
|
|
|
else
|
|
|
|
arch_name.append (":rv32i");
|
|
|
|
}
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
else if (features.xlen == 8)
|
|
|
|
arch_name.append (":rv64i");
|
|
|
|
else if (features.xlen == 16)
|
|
|
|
arch_name.append (":rv128i");
|
|
|
|
|
|
|
|
if (features.flen == 4)
|
|
|
|
arch_name.append ("f");
|
|
|
|
else if (features.flen == 8)
|
|
|
|
arch_name.append ("d");
|
|
|
|
else if (features.flen == 16)
|
|
|
|
arch_name.append ("q");
|
|
|
|
|
2020-07-20 21:18:04 +08:00
|
|
|
set_tdesc_architecture (tdesc.get (), arch_name.c_str ());
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
long regnum = 0;
|
|
|
|
|
|
|
|
/* For now we only support creating 32-bit or 64-bit x-registers. */
|
|
|
|
if (features.xlen == 4)
|
gdb/riscv: rewrite target description validation, add rv32e support
This commit started as adding rv32e support to gdb. The rv32e
architecture is a cut-down rv32i, it only has 16 x-registers compared
to the usual 32, and an rv32e target should not have any floating
point registers.
In order to add this I needed to adjust the target description
validation checks that are performed from riscv_gdbarch_init, and I
finally got fed up with the current scheme of doing these checks and
rewrote this code.
Unfortunately the rv32e changes are currently mixed in with the
rewrite of the validation scheme. I could split these apart if anyone
is really interested in seeing these two ideas as separate patches.
The main idea behind this change is that where previously I tried to
have a purely data driven approach, a set of tables one for each
expected feature, and then a single generic function that would
validate a feature given a table, I have created a new class for each
feature. Each class has its own check member function which allows
the logic for how to check each feature to be different. I think the
new scheme is much easier to follow.
There are some other changes that I made to the validation code as
part of this commit.
I've relaxed some of the checks related to the floating point CSRs.
Previously the 3 CSRs fflags, frm, and fcsr all had to be present in
either the fpu feature or the csr feature. This requirement is now
relaxed, if the CSRs are not present then gdb will not reject the
target description. My thinking here is that there's no gdb
functionality that specifically requires these registers, and so, if a
target offers a description without these registers nothing else in
gdb should stop working.
And as part of the rv32e support targets now only have to provide the
first 16 x-registers and $pc. The second half of the x-registers (x16
-> x31) are now optional.
gdb/ChangeLog:
* arch/riscv.c: Include 'rv32e-xregs.c'.
(riscv_create_target_description): Update to handle rv32e.
* arch/riscv.h (struct riscv_gdbarch_features) <embedded>: New
member variable.
<operator==>: Update to account for new field.
<hash>: Likewise.
* features/Makefile (FEATURE_XMLFILES): Add riscv/rv32e-xregs.xml.
* features/riscv/rv32e-xregs.c: Generated.
* features/riscv/rv32e-xregs.xml: New file.
* riscv-tdep.c (riscv_debug_breakpoints): Move from later in the
file.
(riscv_debug_infcall): Likewise.
(riscv_debug_unwinder): Likewise.
(riscv_debug_gdbarch): Likewise.
(enum riscv_register_required_status): Delete.
(struct riscv_register_feature): Add constructor, delete default
constructor, copy, and assign constructors.
(struct riscv_register_feature::register_info) <required>: Delete.
<check>: Update comment and arguments.
(struct riscv_register_feature) <name>: Change to member function.
<prefer_first_name>: Delete.
<tdesc_feature>: New member function.
<registers>: Rename to...
<m_registers>: ...this.
<m_feature_name>: New member variable.
(riscv_register_feature::register_info::check): Update arguments.
(riscv_xreg_feature): Rewrite as class, create a single static
instance of the class.
(riscv_freg_feature): Likewise.
(riscv_virtual_feature): Likewise.
(riscv_csr_feature): Likewise.
(riscv_create_csr_aliases): Has become a member function inside
riscv_csr_feature class.
(riscv_abi_embedded): New function definition.
(riscv_register_name): Adjust to use new feature objects.
(struct riscv_call_info) <riscv_call_info>: Check for rv32e abi,
and adjust available argument registers.
(riscv_features_from_gdbarch_info): Check for EF_RISCV_RVE flag.
(riscv_check_tdesc_feature): Delete.
(riscv_tdesc_unknown_reg): Adjust to use new feature objects.
(riscv_gdbarch_init): Delete target description checking code, and
instead call to the new feature objects to perform the checks.
Reorder handling of no abi information case, allows small code
simplification.
(_initialize_riscv_tdep): Remove call, this is now done in the
riscv_csr_feature constructor.
* riscv-tdep.h (riscv_abi_embedded): Declare.
2020-11-24 02:03:32 +08:00
|
|
|
{
|
|
|
|
if (features.embedded)
|
|
|
|
regnum = create_feature_riscv_rv32e_xregs (tdesc.get (), regnum);
|
|
|
|
else
|
|
|
|
regnum = create_feature_riscv_32bit_cpu (tdesc.get (), regnum);
|
|
|
|
}
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
else if (features.xlen == 8)
|
2020-07-20 21:18:04 +08:00
|
|
|
regnum = create_feature_riscv_64bit_cpu (tdesc.get (), regnum);
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
|
|
|
/* For now we only support creating 32-bit or 64-bit f-registers. */
|
|
|
|
if (features.flen == 4)
|
2020-07-20 21:18:04 +08:00
|
|
|
regnum = create_feature_riscv_32bit_fpu (tdesc.get (), regnum);
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
else if (features.flen == 8)
|
2020-07-20 21:18:04 +08:00
|
|
|
regnum = create_feature_riscv_64bit_fpu (tdesc.get (), regnum);
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
|
gdb/riscv: add support for vector registers in target descriptions
This commit adds support to RISC-V GDB for vector registers in the
incoming target description.
The vector registers should be described in a feature called
"org.gnu.gdb.riscv.vector", and should contain the register v0 to
v31. There's no restriction on the size or type of these registers,
so the target description can set these up as it requires.
However, if the target feature is present then all of the registers
must be present, and they must all be the same size, these
requirements are, I believe, inline with the RISC-V vector extension.
The DWARF register numbers for the vector registers have been added,
and the code to map between GDB's internal numbering and the DWARF
numbering has been updated.
I have not yet added a feature/riscv/*.xml file for the vector
extension, the consequence of this is that we can't, right now, detect
vector registers on a native target, this patch is all about
supporting vectors on a remote target.
It is worth noting that I don't actually have access to a RISC-V
target with vectors, so the only testing that this patch has had has
been done using 'set tdesc filename ....' to load a target description
to which I have manually added the vector feature. This has shown
that the vector register feature can be successfully parsed, and that
the registers show up in the expected register groups.
Additionally, the RISC-V vector extension is currently at v0.10, which
is also the v1.0 draft release. However, this extension is not yet
finalised. It is possible (but unlikely I think) that the register
set could change between now and the final release of the vector
extension. If this were to happen then we would potentially end up
changing the requirements for the new org.gnu.gdb.riscv.vector
feature. I really don't think it is likely that the register set will
change this late in the process, and even if it did, changing the
feature requirements will not be a problem as far as I am
concerned (when the alternative is GDB just continues without this
feature for now).
gdb/ChangeLog:
* NEWS: Mention new target feature name.
* arch/riscv.c (riscv_create_target_description): GDB doesn't
currently create target descriptions containing vector registers.
* arch/riscv.h (struct riscv_gdbarch_features) <vlen>: New member
variable.
<operator==>: Also compare vlen.
<hash>: Also include vlen.
* riscv-tdep.c (riscv_feature_name_vector): New static global.
(struct riscv_vector_feature): New struct.
(riscv_vector_feature): New static global.
(riscv_register_reggroup_p): Ensure vector registers are part of
the 'all' group, and part of the 'vector' group.
(riscv_dwarf_reg_to_regnum): Handle vector registers.
(riscv_gdbarch_init): Check vector register feature.
* riscv-tdep.h: Add vector registers to GDB's internal register
numbers, and to the DWARF register numbers.
gdb/doc/ChangeLog:
* gdb.texinfo (RISC-V Features): Mention vector register feature.
2021-05-04 18:41:09 +08:00
|
|
|
/* Currently GDB only supports vector features coming from remote
|
|
|
|
targets. We don't support creating vector features on native targets
|
|
|
|
(yet). */
|
|
|
|
if (features.vlen != 0)
|
|
|
|
error (_("unable to create vector feature"));
|
|
|
|
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
return tdesc;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef GDBSERVER
|
|
|
|
|
|
|
|
/* Wrapper used by std::unordered_map to generate hash for feature set. */
|
|
|
|
struct riscv_gdbarch_features_hasher
|
|
|
|
{
|
|
|
|
std::size_t
|
|
|
|
operator() (const riscv_gdbarch_features &features) const noexcept
|
|
|
|
{
|
|
|
|
return features.hash ();
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Cache of previously seen target descriptions, indexed by the feature set
|
|
|
|
that created them. */
|
|
|
|
static std::unordered_map<riscv_gdbarch_features,
|
gdb/riscv: delete target descriptions when gdb exits
It was pointed out on IRC that the RISC-V target allocates target
descriptions and stores them in a global map, and doesn't delete these
target descriptions when GDB shuts down.
This isn't a particular problem, the total number of target
descriptions we can create is very limited so creating these on demand
and holding them for the entire run on GDB seems reasonable.
However, not deleting these objects on GDB exit means extra warnings
are printed from tools like valgrind, and the address sanitiser,
making it harder to spot real issues. As it's reasonably easy to have
GDB correctly delete these objects on exit, lets just do that.
I started by noticing that we already have a target_desc_up type, a
wrapper around unique_ptr that calls a function that will correctly
delete target descriptions, so I want to use that, but....
...that type is declared in gdb/target-descriptions.h. If I try to
include that file in gdb/arch/riscv.c I run into a problem, that file
is compiled into both GDB and GDBServer.
OK, I could guard the include with #ifdef, but surely we can do
better.
So then I decided to move the target_desc_up type into
gdbsupport/tdesc.h, this is the interface file for generic code shared
between GDB and GDBserver (relating to target descriptions). The
actual implementation for the delete function still lives in
gdb/target-description.c, but now gdb/arch/riscv.c can see the
declaration. Problem solved....
... but, though RISC-V doesn't use it I've now exposed the
target_desc_up type to gdbserver, so in future someone _might_ start
using it, which is fine, except right now there's no definition of the
delete function - remember the delete I used is only defined in GDB
code.
No problem, I add an implementation of the delete operator into
gdbserver/tdesc.cc, and all is good..... except....
I start getting this error from GCC:
tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor]
Which is caused because gdbserver's target_desc type inherits from
tdesc_element which has a virtual method, and so GCC worries that
target_desc might be used as a base class.
The solution is to declare gdbserver's target_desc class as final.
This is fine so long as we never intent to inherit from
target_desc (in gdbserver). But if we did then we'd want to make
target_desc's destructor virtual anyway, so the error above would be
resolved, and there wouldn't be an issue.
gdb/ChangeLog:
* arch/riscv.c (riscv_tdesc_cache): Change map type.
(riscv_lookup_target_description): Return pointer out of
unique_ptr.
* target-descriptions.c (allocate_target_description): Add
comment.
(target_desc_deleter::operator()): Likewise.
* target-descriptions.h (struct target_desc_deleter): Moved to
gdbsupport/tdesc.h.
(target_desc_up): Likewise.
gdbserver/ChangeLog:
* tdesc.cc (allocate_target_description): Add header comment.
(target_desc_deleter::operator()): New function.
* tdesc.h (struct target_desc): Declare as final.
gdbsupport/ChangeLog:
* tdesc.h (struct target_desc_deleter): Moved here
from gdb/target-descriptions.h, extend comment.
(target_desc_up): Likewise.
2020-07-17 00:48:12 +08:00
|
|
|
const target_desc_up,
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
riscv_gdbarch_features_hasher> riscv_tdesc_cache;
|
|
|
|
|
|
|
|
/* See arch/riscv.h. */
|
|
|
|
|
|
|
|
const target_desc *
|
|
|
|
riscv_lookup_target_description (const struct riscv_gdbarch_features features)
|
|
|
|
{
|
gdb/riscv: delete target descriptions when gdb exits
It was pointed out on IRC that the RISC-V target allocates target
descriptions and stores them in a global map, and doesn't delete these
target descriptions when GDB shuts down.
This isn't a particular problem, the total number of target
descriptions we can create is very limited so creating these on demand
and holding them for the entire run on GDB seems reasonable.
However, not deleting these objects on GDB exit means extra warnings
are printed from tools like valgrind, and the address sanitiser,
making it harder to spot real issues. As it's reasonably easy to have
GDB correctly delete these objects on exit, lets just do that.
I started by noticing that we already have a target_desc_up type, a
wrapper around unique_ptr that calls a function that will correctly
delete target descriptions, so I want to use that, but....
...that type is declared in gdb/target-descriptions.h. If I try to
include that file in gdb/arch/riscv.c I run into a problem, that file
is compiled into both GDB and GDBServer.
OK, I could guard the include with #ifdef, but surely we can do
better.
So then I decided to move the target_desc_up type into
gdbsupport/tdesc.h, this is the interface file for generic code shared
between GDB and GDBserver (relating to target descriptions). The
actual implementation for the delete function still lives in
gdb/target-description.c, but now gdb/arch/riscv.c can see the
declaration. Problem solved....
... but, though RISC-V doesn't use it I've now exposed the
target_desc_up type to gdbserver, so in future someone _might_ start
using it, which is fine, except right now there's no definition of the
delete function - remember the delete I used is only defined in GDB
code.
No problem, I add an implementation of the delete operator into
gdbserver/tdesc.cc, and all is good..... except....
I start getting this error from GCC:
tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor]
Which is caused because gdbserver's target_desc type inherits from
tdesc_element which has a virtual method, and so GCC worries that
target_desc might be used as a base class.
The solution is to declare gdbserver's target_desc class as final.
This is fine so long as we never intent to inherit from
target_desc (in gdbserver). But if we did then we'd want to make
target_desc's destructor virtual anyway, so the error above would be
resolved, and there wouldn't be an issue.
gdb/ChangeLog:
* arch/riscv.c (riscv_tdesc_cache): Change map type.
(riscv_lookup_target_description): Return pointer out of
unique_ptr.
* target-descriptions.c (allocate_target_description): Add
comment.
(target_desc_deleter::operator()): Likewise.
* target-descriptions.h (struct target_desc_deleter): Moved to
gdbsupport/tdesc.h.
(target_desc_up): Likewise.
gdbserver/ChangeLog:
* tdesc.cc (allocate_target_description): Add header comment.
(target_desc_deleter::operator()): New function.
* tdesc.h (struct target_desc): Declare as final.
gdbsupport/ChangeLog:
* tdesc.h (struct target_desc_deleter): Moved here
from gdb/target-descriptions.h, extend comment.
(target_desc_up): Likewise.
2020-07-17 00:48:12 +08:00
|
|
|
/* Lookup in the cache. If we find it then return the pointer out of
|
|
|
|
the target_desc_up (which is a unique_ptr). This is safe as the
|
|
|
|
riscv_tdesc_cache will exist until GDB exits. */
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
const auto it = riscv_tdesc_cache.find (features);
|
|
|
|
if (it != riscv_tdesc_cache.end ())
|
gdb/riscv: delete target descriptions when gdb exits
It was pointed out on IRC that the RISC-V target allocates target
descriptions and stores them in a global map, and doesn't delete these
target descriptions when GDB shuts down.
This isn't a particular problem, the total number of target
descriptions we can create is very limited so creating these on demand
and holding them for the entire run on GDB seems reasonable.
However, not deleting these objects on GDB exit means extra warnings
are printed from tools like valgrind, and the address sanitiser,
making it harder to spot real issues. As it's reasonably easy to have
GDB correctly delete these objects on exit, lets just do that.
I started by noticing that we already have a target_desc_up type, a
wrapper around unique_ptr that calls a function that will correctly
delete target descriptions, so I want to use that, but....
...that type is declared in gdb/target-descriptions.h. If I try to
include that file in gdb/arch/riscv.c I run into a problem, that file
is compiled into both GDB and GDBServer.
OK, I could guard the include with #ifdef, but surely we can do
better.
So then I decided to move the target_desc_up type into
gdbsupport/tdesc.h, this is the interface file for generic code shared
between GDB and GDBserver (relating to target descriptions). The
actual implementation for the delete function still lives in
gdb/target-description.c, but now gdb/arch/riscv.c can see the
declaration. Problem solved....
... but, though RISC-V doesn't use it I've now exposed the
target_desc_up type to gdbserver, so in future someone _might_ start
using it, which is fine, except right now there's no definition of the
delete function - remember the delete I used is only defined in GDB
code.
No problem, I add an implementation of the delete operator into
gdbserver/tdesc.cc, and all is good..... except....
I start getting this error from GCC:
tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor]
Which is caused because gdbserver's target_desc type inherits from
tdesc_element which has a virtual method, and so GCC worries that
target_desc might be used as a base class.
The solution is to declare gdbserver's target_desc class as final.
This is fine so long as we never intent to inherit from
target_desc (in gdbserver). But if we did then we'd want to make
target_desc's destructor virtual anyway, so the error above would be
resolved, and there wouldn't be an issue.
gdb/ChangeLog:
* arch/riscv.c (riscv_tdesc_cache): Change map type.
(riscv_lookup_target_description): Return pointer out of
unique_ptr.
* target-descriptions.c (allocate_target_description): Add
comment.
(target_desc_deleter::operator()): Likewise.
* target-descriptions.h (struct target_desc_deleter): Moved to
gdbsupport/tdesc.h.
(target_desc_up): Likewise.
gdbserver/ChangeLog:
* tdesc.cc (allocate_target_description): Add header comment.
(target_desc_deleter::operator()): New function.
* tdesc.h (struct target_desc): Declare as final.
gdbsupport/ChangeLog:
* tdesc.h (struct target_desc_deleter): Moved here
from gdb/target-descriptions.h, extend comment.
(target_desc_up): Likewise.
2020-07-17 00:48:12 +08:00
|
|
|
return it->second.get ();
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
|
2020-07-20 21:18:04 +08:00
|
|
|
target_desc_up tdesc (riscv_create_target_description (features));
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
|
2020-07-20 21:18:04 +08:00
|
|
|
/* Add to the cache, and return a pointer borrowed from the
|
|
|
|
target_desc_up. This is safe as the cache (and the pointers
|
|
|
|
contained within it) are not deleted until GDB exits. */
|
|
|
|
target_desc *ptr = tdesc.get ();
|
|
|
|
riscv_tdesc_cache.emplace (features, std::move (tdesc));
|
|
|
|
return ptr;
|
gdb/riscv: Add target description support
This commit adds target description support for riscv.
I've used the split feature approach for specifying the architectural
features, and the CSR feature is auto-generated from the riscv-opc.h
header file.
If the target doesn't provide a suitable target description then GDB
will build one by looking at the bfd headers.
This commit does not implement target description creation for the
Linux or FreeBSD native targets, both of these will need to add
read_description methods into their respective target classes, which
probe the target features, and then call
riscv_create_target_description to build a suitable target
description. Until this is done Linux and FreeBSD will get the same
default target description based on the bfd that bare-metal targets
get.
I've only added feature descriptions for 32 and 64 bit registers, 128
bit registers (for RISC-V) are not supported in the reset of GDB yet.
This commit removes the special reading of the MISA register in order
to establish the target features, this was only used for figuring out
the f-register size, and even that wasn't done consistently. We now
rely on the target to tell us what size of registers it has (or look
in the BFD as a last resort). The result of this is that we should
now support RV64 targets with 32-bit float, though I have not
extensively tested this combination yet.
* Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
(HFILES_NO_SRCDIR): Add arch/riscv.h.
* arch/riscv.c: New file.
* arch/riscv.h: New file.
* configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
this list, and add arch/riscv.o.
* features/Makefile: Add riscv features.
* features/riscv/32bit-cpu.c: New file.
* features/riscv/32bit-cpu.xml: New file.
* features/riscv/32bit-csr.c: New file.
* features/riscv/32bit-csr.xml: New file.
* features/riscv/32bit-fpu.c: New file.
* features/riscv/32bit-fpu.xml: New file.
* features/riscv/64bit-cpu.c: New file.
* features/riscv/64bit-cpu.xml: New file.
* features/riscv/64bit-csr.c: New file.
* features/riscv/64bit-csr.xml: New file.
* features/riscv/64bit-fpu.c: New file.
* features/riscv/64bit-fpu.xml: New file.
* features/riscv/rebuild-csr-xml.sh: New file.
* riscv-tdep.c: Add 'arch/riscv.h' include.
(riscv_gdb_reg_names): Delete.
(csr_reggroup): New global.
(struct riscv_register_alias): Delete.
(struct riscv_register_feature): New structure.
(riscv_register_aliases): Delete.
(riscv_xreg_feature): New global.
(riscv_freg_feature): New global.
(riscv_virtual_feature): New global.
(riscv_csr_feature): New global.
(riscv_create_csr_aliases): New function.
(riscv_read_misa_reg): Delete.
(riscv_has_feature): Delete.
(riscv_isa_xlen): Simplify, just return cached xlen.
(riscv_isa_flen): Simplify, just return cached flen.
(riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
(riscv_register_name): Update to make use of tdesc_register_name.
Look up xreg and freg names in the new globals riscv_xreg_feature
and riscv_freg_feature. Don't supply csr aliases here.
(riscv_fpreg_q_type): Delete.
(riscv_register_type): Use tdesc_register_type in almost all
cases, override the returned type in a few specific cases only.
(riscv_print_one_register_info): Handle errors reading registers.
(riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
registers that are otherwise unknown to GDB. Also check the
csr_reggroup.
(riscv_print_registers_info): Remove assert about upper register
number, and use gdbarch_register_reggroup_p instead of
short-cutting.
(riscv_find_default_target_description): New function.
(riscv_check_tdesc_feature): New function.
(riscv_add_reggroups): New function.
(riscv_setup_register_aliases): New function.
(riscv_init_reggroups): New function.
(_initialize_riscv_tdep): Add calls to setup CSR aliases, and
setup register groups. Register new riscv debug variable.
* riscv-tdep.h: Add 'arch/riscv.h' include.
(struct gdbarch_tdep): Remove abi union, and add
riscv_gdbarch_features field. Remove cached quad floating point
type, and provide initialisation for double type field.
* target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
the list of targets using the feature based target descriptions.
* NEWS: Mention target description support.
gdb/doc/ChangeLog:
* gdb.texinfo (Standard Target Features): Add RISC-V Features
sub-section.
2018-10-29 23:10:52 +08:00
|
|
|
}
|
gdb/riscv: Update API for looking up target descriptions
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
2020-02-19 09:24:37 +08:00
|
|
|
|
|
|
|
#endif /* !GDBSERVER */
|