Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
# Makefile.in generated by automake 1.15.1 from Makefile.am.
|
|
|
|
# @configure_input@
|
|
|
|
|
2021-01-01 16:03:39 +08:00
|
|
|
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
|
|
|
|
# This Makefile.in is free software; the Free Software Foundation
|
|
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
|
|
# PARTICULAR PURPOSE.
|
|
|
|
|
|
|
|
@SET_MAKE@
|
|
|
|
|
|
|
|
#
|
|
|
|
# Copyright (C) 2020 Free Software Foundation, Inc.
|
|
|
|
#
|
|
|
|
# This file is free software; you can redistribute it and/or modify
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
|
|
# (at your option) any later version.
|
|
|
|
#
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
#
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
# along with this program; see the file COPYING3. If not see
|
|
|
|
# <http://www.gnu.org/licenses/>.
|
|
|
|
#
|
|
|
|
|
|
|
|
VPATH = @srcdir@
|
|
|
|
am__is_gnu_make = { \
|
|
|
|
if test -z '$(MAKELEVEL)'; then \
|
|
|
|
false; \
|
|
|
|
elif test -n '$(MAKE_HOST)'; then \
|
|
|
|
true; \
|
|
|
|
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
|
|
|
|
true; \
|
|
|
|
else \
|
|
|
|
false; \
|
|
|
|
fi; \
|
|
|
|
}
|
|
|
|
am__make_running_with_option = \
|
|
|
|
case $${target_option-} in \
|
|
|
|
?) ;; \
|
|
|
|
*) echo "am__make_running_with_option: internal error: invalid" \
|
|
|
|
"target option '$${target_option-}' specified" >&2; \
|
|
|
|
exit 1;; \
|
|
|
|
esac; \
|
|
|
|
has_opt=no; \
|
|
|
|
sane_makeflags=$$MAKEFLAGS; \
|
|
|
|
if $(am__is_gnu_make); then \
|
|
|
|
sane_makeflags=$$MFLAGS; \
|
|
|
|
else \
|
|
|
|
case $$MAKEFLAGS in \
|
|
|
|
*\\[\ \ ]*) \
|
|
|
|
bs=\\; \
|
|
|
|
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
|
|
|
|
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
|
|
|
|
esac; \
|
|
|
|
fi; \
|
|
|
|
skip_next=no; \
|
|
|
|
strip_trailopt () \
|
|
|
|
{ \
|
|
|
|
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
|
|
|
|
}; \
|
|
|
|
for flg in $$sane_makeflags; do \
|
|
|
|
test $$skip_next = yes && { skip_next=no; continue; }; \
|
|
|
|
case $$flg in \
|
|
|
|
*=*|--*) continue;; \
|
|
|
|
-*I) strip_trailopt 'I'; skip_next=yes;; \
|
|
|
|
-*I?*) strip_trailopt 'I';; \
|
|
|
|
-*O) strip_trailopt 'O'; skip_next=yes;; \
|
|
|
|
-*O?*) strip_trailopt 'O';; \
|
|
|
|
-*l) strip_trailopt 'l'; skip_next=yes;; \
|
|
|
|
-*l?*) strip_trailopt 'l';; \
|
|
|
|
-[dEDm]) skip_next=yes;; \
|
|
|
|
-[JT]) skip_next=yes;; \
|
|
|
|
esac; \
|
|
|
|
case $$flg in \
|
|
|
|
*$$target_option*) has_opt=yes; break;; \
|
|
|
|
esac; \
|
|
|
|
done; \
|
|
|
|
test $$has_opt = yes
|
|
|
|
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
|
|
|
|
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
|
|
|
|
pkgdatadir = $(datadir)/@PACKAGE@
|
|
|
|
pkgincludedir = $(includedir)/@PACKAGE@
|
|
|
|
pkglibdir = $(libdir)/@PACKAGE@
|
|
|
|
pkglibexecdir = $(libexecdir)/@PACKAGE@
|
|
|
|
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
|
|
|
|
install_sh_DATA = $(install_sh) -c -m 644
|
|
|
|
install_sh_PROGRAM = $(install_sh) -c
|
|
|
|
install_sh_SCRIPT = $(install_sh) -c
|
|
|
|
INSTALL_HEADER = $(INSTALL_DATA)
|
|
|
|
transform = $(program_transform_name)
|
|
|
|
NORMAL_INSTALL = :
|
|
|
|
PRE_INSTALL = :
|
|
|
|
POST_INSTALL = :
|
|
|
|
NORMAL_UNINSTALL = :
|
|
|
|
PRE_UNINSTALL = :
|
|
|
|
POST_UNINSTALL = :
|
|
|
|
build_triplet = @build@
|
|
|
|
host_triplet = @host@
|
|
|
|
target_triplet = @target@
|
|
|
|
subdir = .
|
|
|
|
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
|
|
|
am__aclocal_m4_deps = $(top_srcdir)/../config/codeset.m4 \
|
|
|
|
$(top_srcdir)/../config/depstand.m4 \
|
|
|
|
$(top_srcdir)/../config/gettext-sister.m4 \
|
|
|
|
$(top_srcdir)/../config/largefile.m4 \
|
|
|
|
$(top_srcdir)/../config/lead-dot.m4 \
|
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
2019-12-20 07:40:15 +08:00
|
|
|
$(top_srcdir)/../config/lib-ld.m4 \
|
|
|
|
$(top_srcdir)/../config/lib-link.m4 \
|
|
|
|
$(top_srcdir)/../config/lib-prefix.m4 \
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
$(top_srcdir)/../config/override.m4 \
|
|
|
|
$(top_srcdir)/../config/plugins.m4 $(top_srcdir)/acinclude.m4 \
|
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
2019-12-20 07:40:15 +08:00
|
|
|
$(top_srcdir)/../bfd/bfd.m4 $(top_srcdir)/common.m4 \
|
|
|
|
$(top_srcdir)/../config/ax_pthread.m4 \
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
$(top_srcdir)/../gdb/ax_cxx_compile_stdcxx.m4 \
|
2020-03-13 02:19:38 +08:00
|
|
|
$(top_srcdir)/../gdb/libiberty.m4 $(top_srcdir)/selftest.m4 \
|
2020-10-26 09:08:49 +08:00
|
|
|
$(top_srcdir)/ptrace.m4 $(top_srcdir)/warning.m4 \
|
2020-02-11 23:46:23 +08:00
|
|
|
$(top_srcdir)/configure.ac
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
|
|
|
|
$(ACLOCAL_M4)
|
|
|
|
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
|
|
|
|
$(am__configure_deps)
|
|
|
|
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
|
|
|
|
configure.lineno config.status.lineno
|
|
|
|
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
|
2020-01-17 23:14:56 +08:00
|
|
|
CONFIG_HEADER = config.h
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
CONFIG_CLEAN_FILES =
|
|
|
|
CONFIG_CLEAN_VPATH_FILES =
|
|
|
|
LIBRARIES = $(noinst_LIBRARIES)
|
|
|
|
AR = ar
|
|
|
|
ARFLAGS = cru
|
|
|
|
AM_V_AR = $(am__v_AR_@AM_V@)
|
|
|
|
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
|
|
|
|
am__v_AR_0 = @echo " AR " $@;
|
|
|
|
am__v_AR_1 =
|
|
|
|
libgdbsupport_a_AR = $(AR) $(ARFLAGS)
|
|
|
|
libgdbsupport_a_LIBADD =
|
|
|
|
@SELFTEST_TRUE@am__objects_1 = selftest.$(OBJEXT)
|
|
|
|
am_libgdbsupport_a_OBJECTS = agent.$(OBJEXT) btrace-common.$(OBJEXT) \
|
|
|
|
buffer.$(OBJEXT) cleanups.$(OBJEXT) common-debug.$(OBJEXT) \
|
|
|
|
common-exceptions.$(OBJEXT) common-inferior.$(OBJEXT) \
|
|
|
|
common-regcache.$(OBJEXT) common-utils.$(OBJEXT) \
|
2020-04-14 02:42:59 +08:00
|
|
|
environ.$(OBJEXT) errors.$(OBJEXT) event-loop.$(OBJEXT) \
|
|
|
|
fileio.$(OBJEXT) filestuff.$(OBJEXT) format.$(OBJEXT) \
|
|
|
|
gdb-dlfcn.$(OBJEXT) gdb_tilde_expand.$(OBJEXT) \
|
|
|
|
gdb_wait.$(OBJEXT) gdb_vecs.$(OBJEXT) job-control.$(OBJEXT) \
|
|
|
|
netstuff.$(OBJEXT) new-op.$(OBJEXT) pathstuff.$(OBJEXT) \
|
|
|
|
print-utils.$(OBJEXT) ptid.$(OBJEXT) rsp-low.$(OBJEXT) \
|
|
|
|
run-time-clock.$(OBJEXT) safe-strerror.$(OBJEXT) \
|
2020-10-08 02:07:55 +08:00
|
|
|
scoped_mmap.$(OBJEXT) search.$(OBJEXT) signals.$(OBJEXT) \
|
2020-04-14 02:42:59 +08:00
|
|
|
signals-state-save-restore.$(OBJEXT) tdesc.$(OBJEXT) \
|
|
|
|
thread-pool.$(OBJEXT) xml-utils.$(OBJEXT) $(am__objects_1)
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
libgdbsupport_a_OBJECTS = $(am_libgdbsupport_a_OBJECTS)
|
|
|
|
AM_V_P = $(am__v_P_@AM_V@)
|
|
|
|
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
|
|
|
|
am__v_P_0 = false
|
|
|
|
am__v_P_1 = :
|
|
|
|
AM_V_GEN = $(am__v_GEN_@AM_V@)
|
|
|
|
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
|
|
|
|
am__v_GEN_0 = @echo " GEN " $@;
|
|
|
|
am__v_GEN_1 =
|
|
|
|
AM_V_at = $(am__v_at_@AM_V@)
|
|
|
|
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
|
|
|
|
am__v_at_0 = @
|
|
|
|
am__v_at_1 =
|
|
|
|
DEFAULT_INCLUDES = -I.@am__isrc@
|
|
|
|
depcomp = $(SHELL) $(top_srcdir)/../depcomp
|
|
|
|
am__depfiles_maybe = depfiles
|
|
|
|
am__mv = mv -f
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
|
|
|
|
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
|
|
|
|
AM_V_CXX = $(am__v_CXX_@AM_V@)
|
|
|
|
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
|
|
|
|
am__v_CXX_0 = @echo " CXX " $@;
|
|
|
|
am__v_CXX_1 =
|
|
|
|
CXXLD = $(CXX)
|
|
|
|
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
|
|
|
|
-o $@
|
|
|
|
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
|
|
|
|
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
|
|
|
|
am__v_CXXLD_0 = @echo " CXXLD " $@;
|
|
|
|
am__v_CXXLD_1 =
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
SOURCES = $(libgdbsupport_a_SOURCES)
|
|
|
|
am__can_run_installinfo = \
|
|
|
|
case $$AM_UPDATE_INFO_DIR in \
|
|
|
|
n|no|NO) false;; \
|
|
|
|
*) (install-info --version) >/dev/null 2>&1;; \
|
|
|
|
esac
|
|
|
|
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
|
|
|
|
$(LISP)config.in
|
|
|
|
# Read a list of newline-separated strings from the standard input,
|
|
|
|
# and print each of them once, without duplicates. Input order is
|
|
|
|
# *not* preserved.
|
|
|
|
am__uniquify_input = $(AWK) '\
|
|
|
|
BEGIN { nonempty = 0; } \
|
|
|
|
{ items[$$0] = 1; nonempty = 1; } \
|
|
|
|
END { if (nonempty) { for (i in items) print i; }; } \
|
|
|
|
'
|
|
|
|
# Make sure the list of sources is unique. This is necessary because,
|
|
|
|
# e.g., the same source file might be shared among _SOURCES variables
|
|
|
|
# for different programs/libraries.
|
|
|
|
am__define_uniq_tagged_files = \
|
|
|
|
list='$(am__tagged_files)'; \
|
|
|
|
unique=`for i in $$list; do \
|
|
|
|
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
|
|
|
|
done | $(am__uniquify_input)`
|
|
|
|
ETAGS = etags
|
|
|
|
CTAGS = ctags
|
|
|
|
CSCOPE = cscope
|
|
|
|
AM_RECURSIVE_TARGETS = cscope
|
|
|
|
ACLOCAL = @ACLOCAL@
|
|
|
|
ALLOCA = @ALLOCA@
|
|
|
|
AMTAR = @AMTAR@
|
|
|
|
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
|
|
|
|
AUTOCONF = @AUTOCONF@
|
|
|
|
AUTOHEADER = @AUTOHEADER@
|
|
|
|
AUTOMAKE = @AUTOMAKE@
|
|
|
|
AWK = @AWK@
|
|
|
|
CATALOGS = @CATALOGS@
|
|
|
|
CATOBJEXT = @CATOBJEXT@
|
|
|
|
CC = @CC@
|
|
|
|
CCDEPMODE = @CCDEPMODE@
|
|
|
|
CFLAGS = @CFLAGS@
|
|
|
|
CPP = @CPP@
|
|
|
|
CPPFLAGS = @CPPFLAGS@
|
|
|
|
CXX = @CXX@
|
|
|
|
CXXDEPMODE = @CXXDEPMODE@
|
|
|
|
CXXFLAGS = @CXXFLAGS@
|
|
|
|
CXX_DIALECT = @CXX_DIALECT@
|
|
|
|
CYGPATH_W = @CYGPATH_W@
|
|
|
|
DATADIRNAME = @DATADIRNAME@
|
|
|
|
DEFS = @DEFS@
|
|
|
|
DEPDIR = @DEPDIR@
|
|
|
|
ECHO_C = @ECHO_C@
|
|
|
|
ECHO_N = @ECHO_N@
|
|
|
|
ECHO_T = @ECHO_T@
|
|
|
|
EGREP = @EGREP@
|
|
|
|
EXEEXT = @EXEEXT@
|
|
|
|
GENCAT = @GENCAT@
|
|
|
|
GMSGFMT = @GMSGFMT@
|
|
|
|
GREP = @GREP@
|
|
|
|
HAVE_CXX11 = @HAVE_CXX11@
|
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
2019-12-20 07:40:15 +08:00
|
|
|
HAVE_LIBIPT = @HAVE_LIBIPT@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
INCINTL = @INCINTL@
|
|
|
|
INSTALL = @INSTALL@
|
|
|
|
INSTALL_DATA = @INSTALL_DATA@
|
|
|
|
INSTALL_PROGRAM = @INSTALL_PROGRAM@
|
|
|
|
INSTALL_SCRIPT = @INSTALL_SCRIPT@
|
|
|
|
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
|
|
|
|
INSTOBJEXT = @INSTOBJEXT@
|
Unify Solaris procfs and largefile handling
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
2020-07-30 21:41:50 +08:00
|
|
|
LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
LDFLAGS = @LDFLAGS@
|
|
|
|
LIBINTL = @LIBINTL@
|
|
|
|
LIBINTL_DEP = @LIBINTL_DEP@
|
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
2019-12-20 07:40:15 +08:00
|
|
|
LIBIPT = @LIBIPT@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
LIBOBJS = @LIBOBJS@
|
|
|
|
LIBS = @LIBS@
|
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
2019-12-20 07:40:15 +08:00
|
|
|
LTLIBIPT = @LTLIBIPT@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
LTLIBOBJS = @LTLIBOBJS@
|
|
|
|
MAINT = @MAINT@
|
|
|
|
MAKEINFO = @MAKEINFO@
|
|
|
|
MKDIR_P = @MKDIR_P@
|
|
|
|
OBJEXT = @OBJEXT@
|
|
|
|
PACKAGE = @PACKAGE@
|
|
|
|
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
|
|
|
|
PACKAGE_NAME = @PACKAGE_NAME@
|
|
|
|
PACKAGE_STRING = @PACKAGE_STRING@
|
|
|
|
PACKAGE_TARNAME = @PACKAGE_TARNAME@
|
|
|
|
PACKAGE_URL = @PACKAGE_URL@
|
|
|
|
PACKAGE_VERSION = @PACKAGE_VERSION@
|
|
|
|
PATH_SEPARATOR = @PATH_SEPARATOR@
|
|
|
|
POSUB = @POSUB@
|
|
|
|
PTHREAD_CC = @PTHREAD_CC@
|
|
|
|
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
|
|
|
|
PTHREAD_LIBS = @PTHREAD_LIBS@
|
|
|
|
RANLIB = @RANLIB@
|
|
|
|
SED = @SED@
|
|
|
|
SET_MAKE = @SET_MAKE@
|
|
|
|
SHELL = @SHELL@
|
|
|
|
STRIP = @STRIP@
|
|
|
|
USE_NLS = @USE_NLS@
|
|
|
|
VERSION = @VERSION@
|
2020-02-11 23:46:23 +08:00
|
|
|
WARN_CFLAGS = @WARN_CFLAGS@
|
|
|
|
WERROR_CFLAGS = @WERROR_CFLAGS@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
XGETTEXT = @XGETTEXT@
|
|
|
|
abs_builddir = @abs_builddir@
|
|
|
|
abs_srcdir = @abs_srcdir@
|
|
|
|
abs_top_builddir = @abs_top_builddir@
|
|
|
|
abs_top_srcdir = @abs_top_srcdir@
|
|
|
|
ac_ct_CC = @ac_ct_CC@
|
|
|
|
ac_ct_CXX = @ac_ct_CXX@
|
|
|
|
am__include = @am__include@
|
|
|
|
am__leading_dot = @am__leading_dot@
|
|
|
|
am__quote = @am__quote@
|
|
|
|
am__tar = @am__tar@
|
|
|
|
am__untar = @am__untar@
|
|
|
|
ax_pthread_config = @ax_pthread_config@
|
|
|
|
bindir = @bindir@
|
|
|
|
build = @build@
|
|
|
|
build_alias = @build_alias@
|
|
|
|
build_cpu = @build_cpu@
|
|
|
|
build_os = @build_os@
|
|
|
|
build_vendor = @build_vendor@
|
|
|
|
builddir = @builddir@
|
|
|
|
datadir = @datadir@
|
|
|
|
datarootdir = @datarootdir@
|
|
|
|
docdir = @docdir@
|
|
|
|
dvidir = @dvidir@
|
|
|
|
exec_prefix = @exec_prefix@
|
|
|
|
host = @host@
|
|
|
|
host_alias = @host_alias@
|
|
|
|
host_cpu = @host_cpu@
|
|
|
|
host_os = @host_os@
|
|
|
|
host_vendor = @host_vendor@
|
|
|
|
htmldir = @htmldir@
|
|
|
|
includedir = @includedir@
|
|
|
|
infodir = @infodir@
|
|
|
|
install_sh = @install_sh@
|
|
|
|
libdir = @libdir@
|
|
|
|
libexecdir = @libexecdir@
|
|
|
|
localedir = @localedir@
|
|
|
|
localstatedir = @localstatedir@
|
|
|
|
mandir = @mandir@
|
|
|
|
mkdir_p = @mkdir_p@
|
|
|
|
oldincludedir = @oldincludedir@
|
|
|
|
pdfdir = @pdfdir@
|
|
|
|
prefix = @prefix@
|
|
|
|
program_transform_name = @program_transform_name@
|
|
|
|
psdir = @psdir@
|
|
|
|
sbindir = @sbindir@
|
|
|
|
sharedstatedir = @sharedstatedir@
|
|
|
|
srcdir = @srcdir@
|
|
|
|
sysconfdir = @sysconfdir@
|
|
|
|
target = @target@
|
|
|
|
target_alias = @target_alias@
|
|
|
|
target_cpu = @target_cpu@
|
|
|
|
target_os = @target_os@
|
|
|
|
target_vendor = @target_vendor@
|
|
|
|
top_build_prefix = @top_build_prefix@
|
|
|
|
top_builddir = @top_builddir@
|
|
|
|
top_srcdir = @top_srcdir@
|
|
|
|
AUTOMAKE_OPTIONS = no-dist foreign
|
|
|
|
ACLOCAL_AMFLAGS = -I . -I ../config
|
|
|
|
AM_CPPFLAGS = -I$(srcdir)/../include -I$(srcdir)/../gdb \
|
|
|
|
-I../gnulib/import -I$(srcdir)/../gnulib/import \
|
Unify Solaris procfs and largefile handling
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
2020-07-30 21:41:50 +08:00
|
|
|
-I.. -I$(srcdir)/.. $(INCINTL) -I../bfd -I$(srcdir)/../bfd \
|
|
|
|
@LARGEFILE_CPPFLAGS@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
|
2020-03-04 06:11:12 +08:00
|
|
|
AM_CXXFLAGS = $(WARN_CFLAGS) $(WERROR_CFLAGS)
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
noinst_LIBRARIES = libgdbsupport.a
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
@SELFTEST_TRUE@selftest = selftest.cc
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
libgdbsupport_a_SOURCES = \
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
agent.cc \
|
|
|
|
btrace-common.cc \
|
|
|
|
buffer.cc \
|
|
|
|
cleanups.cc \
|
|
|
|
common-debug.cc \
|
|
|
|
common-exceptions.cc \
|
|
|
|
common-inferior.cc \
|
|
|
|
common-regcache.cc \
|
|
|
|
common-utils.cc \
|
|
|
|
environ.cc \
|
|
|
|
errors.cc \
|
2020-04-14 02:42:59 +08:00
|
|
|
event-loop.cc \
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
fileio.cc \
|
|
|
|
filestuff.cc \
|
|
|
|
format.cc \
|
|
|
|
gdb-dlfcn.cc \
|
|
|
|
gdb_tilde_expand.cc \
|
|
|
|
gdb_wait.cc \
|
|
|
|
gdb_vecs.cc \
|
|
|
|
job-control.cc \
|
|
|
|
netstuff.cc \
|
|
|
|
new-op.cc \
|
|
|
|
pathstuff.cc \
|
|
|
|
print-utils.cc \
|
|
|
|
ptid.cc \
|
|
|
|
rsp-low.cc \
|
|
|
|
run-time-clock.cc \
|
|
|
|
safe-strerror.cc \
|
|
|
|
scoped_mmap.cc \
|
2020-10-08 02:07:55 +08:00
|
|
|
search.cc \
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
signals.cc \
|
|
|
|
signals-state-save-restore.cc \
|
|
|
|
tdesc.cc \
|
|
|
|
thread-pool.cc \
|
|
|
|
xml-utils.cc \
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
$(selftest)
|
|
|
|
|
2020-01-17 23:14:56 +08:00
|
|
|
all: config.h
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
$(MAKE) $(AM_MAKEFLAGS) all-am
|
|
|
|
|
|
|
|
.SUFFIXES:
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
.SUFFIXES: .cc .o .obj
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
am--refresh: Makefile
|
|
|
|
@:
|
|
|
|
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
|
|
|
|
@for dep in $?; do \
|
|
|
|
case '$(am__configure_deps)' in \
|
|
|
|
*$$dep*) \
|
|
|
|
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
|
|
|
|
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
|
|
|
|
&& exit 0; \
|
|
|
|
exit 1;; \
|
|
|
|
esac; \
|
|
|
|
done; \
|
|
|
|
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
|
|
|
|
$(am__cd) $(top_srcdir) && \
|
|
|
|
$(AUTOMAKE) --foreign Makefile
|
|
|
|
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
|
|
|
|
@case '$?' in \
|
|
|
|
*config.status*) \
|
|
|
|
echo ' $(SHELL) ./config.status'; \
|
|
|
|
$(SHELL) ./config.status;; \
|
|
|
|
*) \
|
|
|
|
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
|
|
|
|
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
|
|
|
|
esac;
|
|
|
|
|
|
|
|
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
|
|
|
|
$(SHELL) ./config.status --recheck
|
|
|
|
|
|
|
|
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
|
|
|
$(am__cd) $(srcdir) && $(AUTOCONF)
|
|
|
|
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
|
|
|
|
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
|
|
|
|
$(am__aclocal_m4_deps):
|
|
|
|
|
2020-01-17 23:14:56 +08:00
|
|
|
config.h: stamp-h1
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
@test -f $@ || rm -f stamp-h1
|
|
|
|
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
|
|
|
|
|
|
|
|
stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
|
|
|
|
@rm -f stamp-h1
|
2020-01-17 23:14:56 +08:00
|
|
|
cd $(top_builddir) && $(SHELL) ./config.status config.h
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
|
|
|
|
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
|
|
|
|
rm -f stamp-h1
|
|
|
|
touch $@
|
|
|
|
|
|
|
|
distclean-hdr:
|
2020-01-17 23:14:56 +08:00
|
|
|
-rm -f config.h stamp-h1
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
|
|
|
|
clean-noinstLIBRARIES:
|
|
|
|
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
|
|
|
|
|
|
|
|
libgdbsupport.a: $(libgdbsupport_a_OBJECTS) $(libgdbsupport_a_DEPENDENCIES) $(EXTRA_libgdbsupport_a_DEPENDENCIES)
|
|
|
|
$(AM_V_at)-rm -f libgdbsupport.a
|
|
|
|
$(AM_V_AR)$(libgdbsupport_a_AR) libgdbsupport.a $(libgdbsupport_a_OBJECTS) $(libgdbsupport_a_LIBADD)
|
|
|
|
$(AM_V_at)$(RANLIB) libgdbsupport.a
|
|
|
|
|
|
|
|
mostlyclean-compile:
|
|
|
|
-rm -f *.$(OBJEXT)
|
|
|
|
|
|
|
|
distclean-compile:
|
|
|
|
-rm -f *.tab.c
|
|
|
|
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/agent.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/btrace-common.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cleanups.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common-debug.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common-exceptions.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common-inferior.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common-regcache.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common-utils.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/environ.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/errors.Po@am__quote@
|
2020-04-14 02:42:59 +08:00
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/event-loop.Po@am__quote@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileio.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filestuff.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/format.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb-dlfcn.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb_tilde_expand.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb_vecs.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb_wait.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/job-control.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/netstuff.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new-op.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pathstuff.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/print-utils.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptid.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rsp-low.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/run-time-clock.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/safe-strerror.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scoped_mmap.Po@am__quote@
|
2020-10-08 02:07:55 +08:00
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search.Po@am__quote@
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/selftest.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signals-state-save-restore.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signals.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tdesc.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread-pool.Po@am__quote@
|
|
|
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xml-utils.Po@am__quote@
|
|
|
|
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
.cc.o:
|
|
|
|
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
|
|
|
|
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
|
|
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
|
|
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
|
|
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
|
gdbsupport: rename source files to .cc
This patch renames the .c source files in gdbsupport to .cc.
In the gdb directory, there is an argument against renaming the source
files, which is that it makes using some git commands more difficult to
do archeology. Some commands have some kind of "follow" option that
makes git try to follow renames, but it doesn't work in all situations.
Given that we have just moved the gdbsupport directory, that argument
doesn't hold for source files in that directory. I therefore suggest
renaming them to .cc, so that they are automatically recognized as C++
by various tools and editors.
The original motivation behind this is that when building gdbsupport
with clang, I get:
CC agent.o
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated]
In the gdb/ directory, we make clang happy by passing "-x c++". We
could do this in gdbsupport too, but I think that renaming the files is
a better long-term solution.
gdbserver still does its own build of gdbsupport, so a few changes in
its Makefile are necessary.
gdbsupport/ChangeLog:
* Makefile.am: Rename source files from .c to .cc.
(CC, CFLAGS): Don't override.
(AM_CFLAGS): Rename to ...
(AM_CXXFLAGS): ... this.
* Makefile.in: Re-generate.
* %.c: Rename to %.cc.
gdbserver/ChangeLog:
* Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-14 05:27:02 +08:00
|
|
|
.cc.obj:
|
|
|
|
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
|
|
|
|
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
|
|
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
|
|
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
|
|
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
|
|
|
|
ID: $(am__tagged_files)
|
|
|
|
$(am__define_uniq_tagged_files); mkid -fID $$unique
|
|
|
|
tags: tags-am
|
|
|
|
TAGS: tags
|
|
|
|
|
|
|
|
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
|
|
|
|
set x; \
|
|
|
|
here=`pwd`; \
|
|
|
|
$(am__define_uniq_tagged_files); \
|
|
|
|
shift; \
|
|
|
|
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
|
|
|
|
test -n "$$unique" || unique=$$empty_fix; \
|
|
|
|
if test $$# -gt 0; then \
|
|
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
|
|
"$$@" $$unique; \
|
|
|
|
else \
|
|
|
|
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
|
|
|
|
$$unique; \
|
|
|
|
fi; \
|
|
|
|
fi
|
|
|
|
ctags: ctags-am
|
|
|
|
|
|
|
|
CTAGS: ctags
|
|
|
|
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
|
|
|
|
$(am__define_uniq_tagged_files); \
|
|
|
|
test -z "$(CTAGS_ARGS)$$unique" \
|
|
|
|
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
|
|
|
|
$$unique
|
|
|
|
|
|
|
|
GTAGS:
|
|
|
|
here=`$(am__cd) $(top_builddir) && pwd` \
|
|
|
|
&& $(am__cd) $(top_srcdir) \
|
|
|
|
&& gtags -i $(GTAGS_ARGS) "$$here"
|
|
|
|
cscope: cscope.files
|
|
|
|
test ! -s cscope.files \
|
|
|
|
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
|
|
|
|
clean-cscope:
|
|
|
|
-rm -f cscope.files
|
|
|
|
cscope.files: clean-cscope cscopelist
|
|
|
|
cscopelist: cscopelist-am
|
|
|
|
|
|
|
|
cscopelist-am: $(am__tagged_files)
|
|
|
|
list='$(am__tagged_files)'; \
|
|
|
|
case "$(srcdir)" in \
|
|
|
|
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
|
|
|
|
*) sdir=$(subdir)/$(srcdir) ;; \
|
|
|
|
esac; \
|
|
|
|
for i in $$list; do \
|
|
|
|
if test -f "$$i"; then \
|
|
|
|
echo "$(subdir)/$$i"; \
|
|
|
|
else \
|
|
|
|
echo "$$sdir/$$i"; \
|
|
|
|
fi; \
|
|
|
|
done >> $(top_builddir)/cscope.files
|
|
|
|
|
|
|
|
distclean-tags:
|
|
|
|
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
|
|
|
|
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
|
|
|
|
check-am: all-am
|
|
|
|
check: check-am
|
2020-01-17 23:14:56 +08:00
|
|
|
all-am: Makefile $(LIBRARIES) config.h
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
installdirs:
|
|
|
|
install: install-am
|
|
|
|
install-exec: install-exec-am
|
|
|
|
install-data: install-data-am
|
|
|
|
uninstall: uninstall-am
|
|
|
|
|
|
|
|
install-am: all-am
|
|
|
|
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
|
|
|
|
|
|
|
|
installcheck: installcheck-am
|
|
|
|
install-strip:
|
|
|
|
if test -z '$(STRIP)'; then \
|
|
|
|
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
|
|
|
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
|
|
|
install; \
|
|
|
|
else \
|
|
|
|
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
|
|
|
|
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
|
|
|
|
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
|
|
|
|
fi
|
|
|
|
mostlyclean-generic:
|
|
|
|
|
|
|
|
clean-generic:
|
|
|
|
|
|
|
|
distclean-generic:
|
|
|
|
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
|
|
|
|
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
|
|
|
|
|
|
|
|
maintainer-clean-generic:
|
|
|
|
@echo "This command is intended for maintainers to use"
|
|
|
|
@echo "it deletes files that may require special tools to rebuild."
|
|
|
|
clean: clean-am
|
|
|
|
|
|
|
|
clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
|
|
|
|
|
|
|
|
distclean: distclean-am
|
|
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
|
|
-rm -rf ./$(DEPDIR)
|
|
|
|
-rm -f Makefile
|
|
|
|
distclean-am: clean-am distclean-compile distclean-generic \
|
|
|
|
distclean-hdr distclean-tags
|
|
|
|
|
|
|
|
dvi: dvi-am
|
|
|
|
|
|
|
|
dvi-am:
|
|
|
|
|
|
|
|
html: html-am
|
|
|
|
|
|
|
|
html-am:
|
|
|
|
|
|
|
|
info: info-am
|
|
|
|
|
|
|
|
info-am:
|
|
|
|
|
|
|
|
install-data-am:
|
|
|
|
|
|
|
|
install-dvi: install-dvi-am
|
|
|
|
|
|
|
|
install-dvi-am:
|
|
|
|
|
|
|
|
install-exec-am:
|
|
|
|
|
|
|
|
install-html: install-html-am
|
|
|
|
|
|
|
|
install-html-am:
|
|
|
|
|
|
|
|
install-info: install-info-am
|
|
|
|
|
|
|
|
install-info-am:
|
|
|
|
|
|
|
|
install-man:
|
|
|
|
|
|
|
|
install-pdf: install-pdf-am
|
|
|
|
|
|
|
|
install-pdf-am:
|
|
|
|
|
|
|
|
install-ps: install-ps-am
|
|
|
|
|
|
|
|
install-ps-am:
|
|
|
|
|
|
|
|
installcheck-am:
|
|
|
|
|
|
|
|
maintainer-clean: maintainer-clean-am
|
|
|
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
|
|
|
|
-rm -rf $(top_srcdir)/autom4te.cache
|
|
|
|
-rm -rf ./$(DEPDIR)
|
|
|
|
-rm -f Makefile
|
|
|
|
maintainer-clean-am: distclean-am maintainer-clean-generic
|
|
|
|
|
|
|
|
mostlyclean: mostlyclean-am
|
|
|
|
|
|
|
|
mostlyclean-am: mostlyclean-compile mostlyclean-generic
|
|
|
|
|
|
|
|
pdf: pdf-am
|
|
|
|
|
|
|
|
pdf-am:
|
|
|
|
|
|
|
|
ps: ps-am
|
|
|
|
|
|
|
|
ps-am:
|
|
|
|
|
|
|
|
uninstall-am:
|
|
|
|
|
|
|
|
.MAKE: all install-am install-strip
|
|
|
|
|
|
|
|
.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
|
|
|
|
clean-cscope clean-generic clean-noinstLIBRARIES cscope \
|
|
|
|
cscopelist-am ctags ctags-am distclean distclean-compile \
|
|
|
|
distclean-generic distclean-hdr distclean-tags dvi dvi-am html \
|
|
|
|
html-am info info-am install install-am install-data \
|
|
|
|
install-data-am install-dvi install-dvi-am install-exec \
|
|
|
|
install-exec-am install-html install-html-am install-info \
|
|
|
|
install-info-am install-man install-pdf install-pdf-am \
|
|
|
|
install-ps install-ps-am install-strip installcheck \
|
|
|
|
installcheck-am installdirs maintainer-clean \
|
|
|
|
maintainer-clean-generic mostlyclean mostlyclean-compile \
|
|
|
|
mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
|
|
|
|
uninstall-am
|
|
|
|
|
|
|
|
.PRECIOUS: Makefile
|
|
|
|
|
|
|
|
|
2020-03-04 06:11:12 +08:00
|
|
|
override CXX += $(CXX_DIALECT)
|
|
|
|
|
2019-12-20 08:51:40 +08:00
|
|
|
# Double-check that no defines are missing from our configury.
|
|
|
|
check-defines:
|
|
|
|
cd $(srcdir) && emacs --script check-defines.el
|
|
|
|
|
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-07-09 22:06:39 +08:00
|
|
|
# Tell versions [3.59,3.63) of GNU make to not export all variables.
|
|
|
|
# Otherwise a system limit (for SysV at least) may be exceeded.
|
|
|
|
.NOEXPORT:
|