binutils-gdb/ld/ChangeLog

942 lines
32 KiB
Plaintext
Raw Normal View History

2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
* configure.tgt: Add mips*-img-elf* target triple.
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
2014-08-22 Andreas Tobler <andreast@fgznet.ch>
* emulparams/armelf_fbsd.sh (TEXT_START_ADDR): Increase alignment to
64kB boundary like in armelf_linux.sh.
Index PowerPC64 linker generated .eh_frame in .eh_frame_hdr I noticed recently that .eh_frame FDEs generated by the linker for call stubs and .glink weren't being indexed in .eh_frame_hdr, due to bfd_elf_discard_info being run before the linker generated .eh_frame sections were available for parsing. This patch moves code around in elf64-ppc.c and ppc64elf.em to avoid that problem. Another problem fixed here is that --gc-sections parses .eh_frame early, and the existing machinery allows only one go at parsing the .eh_frame sections. That resulted in the linker generated .eh_frame CIEs not being merged and no .eh_frame_hdr index entries for those FDEs. It turns out that all the info from parsing .eh_frame is attached to the section, so order of parsing isn't important, and after parsing sec_info_type being set will prevent a section being parsed again. At least, when parsing doesn't hit an error. So there isn't really any need for "parsed_eh_frame". "merge_cies" is also redundant, which means _bfd_elf_{begin,end}_eh_frame_parsing can also disappear. bfd/ * elf-bfd.h (struct eh_frame_hdr_info): Delete merge_cies and parsed_eh_frames. (_bfd_elf_begin_eh_frame_parsing): Delete. (_bfd_elf_end_eh_frame_parsing): Delete. * elf-eh-frame.c (_bfd_elf_begin_eh_frame_parsing): Delete. (_bfd_elf_end_eh_frame_parsing): Delete. (_bfd_elf_parse_eh_frame): Don't test parsed_eh_frame. Test !info->relocatable in place of merge_cies. * elflink.c (bfd_elf_gc_sections, bfd_elf_discard_info): Adjust. * elf64-ppc.c (glink_eh_frame_cie): Pad to multiple of 8. (ppc64_elf_size_stubs): Likewise pad stub FDE. (ppc64_elf_build_stubs): Move code setting glink .eh_frame to.. (ppc64_elf_size_stubs): ..here and.. (ppc64_elf_finish_dynamic_sections): ..here. ld/ * emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call bfd_elf_discard_info after generating glink .eh_frame. Delete redundant test on ppc64_elf_setup_section_lists status.
2014-08-22 07:37:35 +08:00
2014-08-22 Alan Modra <amodra@gmail.com>
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call
bfd_elf_discard_info after generating glink .eh_frame. Delete
redundant test on ppc64_elf_setup_section_lists status.
2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
* emultempl/armelf.em (OPTION_STUBGROUP_SIZE): Fix formatting.
(OPTION_NO_MERGE_EXIDX_ENTRIES, OPTION_LONG_PLT): Likewise.
2014-08-20 Will Newton <will.newton@linaro.org>
* configure.tgt: Default armeb-*-eabi* to big endian.
2014-08-20 Daniel Micay <danielmicay@gmail.com>
* emultempl/pep.em: Add --high-entropy-va switch.
* ld.texinfo: Document the --high-entropy-va switch.
2014-08-20 Nick Clifton <nickc@redhat.com>
* scripttempl/DWARF.sc: Add copyright notice.
* scripttempl/aix.sc: Likewise.
* scripttempl/alpha.sc: Likewise.
* scripttempl/alphavms.sc: Likewise.
* scripttempl/aout.sc: Likewise.
* scripttempl/armaout.sc: Likewise.
* scripttempl/armbpabi.sc: Likewise.
* scripttempl/armcoff.sc: Likewise.
* scripttempl/avr.sc: Likewise.
* scripttempl/avrtiny.sc: Likewise.
* scripttempl/crisaout.sc: Likewise.
* scripttempl/delta68.sc: Likewise.
* scripttempl/dlx.sc: Likewise.
* scripttempl/elf.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32cr16c.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf32xc16x.sc: Likewise.
* scripttempl/elf32xc16xl.sc: Likewise.
* scripttempl/elf32xc16xs.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfmicroblaze.sc: Likewise.
* scripttempl/elfxgate.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/epiphany_4x4.sc: Likewise.
* scripttempl/epocpe.sc: Likewise.
* scripttempl/h8300.sc: Likewise.
* scripttempl/h8300h.sc: Likewise.
* scripttempl/h8300hn.sc: Likewise.
* scripttempl/h8300s.sc: Likewise.
* scripttempl/h8300sn.sc: Likewise.
* scripttempl/h8300sx.sc: Likewise.
* scripttempl/h8300sxn.sc: Likewise.
* scripttempl/h8500.sc: Likewise.
* scripttempl/h8500b.sc: Likewise.
* scripttempl/h8500c.sc: Likewise.
* scripttempl/h8500m.sc: Likewise.
* scripttempl/h8500s.sc: Likewise.
* scripttempl/hppaelf.sc: Likewise.
* scripttempl/i386beos.sc: Likewise.
* scripttempl/i386coff.sc: Likewise.
* scripttempl/i386go32.sc: Likewise.
* scripttempl/i386msdos.sc: Likewise.
* scripttempl/i860coff.sc: Likewise.
* scripttempl/i960.sc: Likewise.
* scripttempl/ia64vms.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/m68kaux.sc: Likewise.
* scripttempl/m68kcoff.sc: Likewise.
* scripttempl/m88kbcs.sc: Likewise.
* scripttempl/mcorepe.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mips.sc: Likewise.
* scripttempl/mipsbsd.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/moxie.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/nw.sc: Likewise.
* scripttempl/pe.sc: Likewise.
* scripttempl/pep.sc: Likewise.
* scripttempl/pj.sc: Likewise.
* scripttempl/ppcpe.sc: Likewise.
* scripttempl/psos.sc: Likewise.
* scripttempl/riscix.sc: Likewise.
* scripttempl/sh.sc: Likewise.
* scripttempl/sparccoff.sc: Likewise.
* scripttempl/st2000.sc: Likewise.
* scripttempl/tic30aout.sc: Likewise.
* scripttempl/tic30coff.sc: Likewise.
* scripttempl/tic4xcoff.sc: Likewise.
* scripttempl/tic54xcoff.sc: Likewise.
* scripttempl/tic80coff.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/v850_rh850.sc: Likewise.
* scripttempl/vanilla.sc: Likewise.
* scripttempl/w65.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* scripttempl/z80.sc: Likewise.
* scripttempl/z8000.sc: Likewise.
2014-08-19 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
2014-08-18 Alan Modra <amodra@gmail.com>
* ld.texinfo (--as-needed): Clarify that references from libraries
must be from needed libraries.
2014-08-18 Alan Modra <amodra@gmail.com>
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_after_allocation):
Handle error status from bfd_elf_discard_info.
* emultempl/armelf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/nios2elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/tic6xdsbt.em: Likewise.
* emultempl/vms.em: Likewise.
2014-08-14 Alan Modra <amodra@gmail.com>
PR 16563
* ldlang.c (map_head_is_link_order): Rename from
stripped_excluded_sections.
(lang_clear_os_map): New function, extracted from..
(strip_excluded_output_sections): ..here.
* ldlang.h (lang_clear_os_map): Declare.
* ldwrite.c (ldwrite): Call lang_clear_os_map.
* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
Likewise.
2014-08-14 Alan Modra <amodra@gmail.com>
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
2014-08-14 Alan Modra <amodra@gmail.com>
* plugin.c (is_ir_dummy_bfd): Test BFD_PLUGIN flag rather than
flags.claimed.
2014-08-13 Yaakov Selkowitz <yselkowi@redhat.com>
* pe-dll.c (autofilter_entry_type autofilter_symbollist_i386): Add
__dso_handle.
2014-08-13 Alan Modra <amodra@gmail.com>
* ldlang.c (open_input_bfds): Don't use bfd_elf_get_dyn_lib_class.
2014-08-12 Alan Modra <amodra@gmail.com>
* ldlang.h (struct lang_input_statement_flags): Don't make "reload"
field conditional on ENABLE_PLUGINS.
* ldlang.c (open_input_bfds): Expand plugin_should_reload.
* plugin.h (plugin_should_reload): Delete.
* plugin.c (plugin_should_reload): Delete.
2014-08-12 Alan Modra <amodra@gmail.com>
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
2014-08-12 09:38:26 +08:00
2014-08-12 Alan Modra <amodra@gmail.com>
* plugin.c (plugin_load_plugins): Set link_info.lto_plugin_active.
2014-08-08 Ulrich Drepper <drepper@gmail.com>
* ldlang.h (struct lang_input_statement_flags): Add pushed
member.
* ldlex.h (enum option_values): Add OPTION_PUSH_STATE and
OPTION_POP_STATE.
* lexsup.c (ld_options): Add entries for --push-state and
--pop-state.
(parse_args): Handle OPTION_PUSH_STATE and OPTION_POP_STATE.
* ld.texinfo: Document --push-state and --pop-state.
2014-08-06 H.J. Lu <hongjiu.lu@intel.com>
PR14918
* plugin.c (plugin_opt_plugin_arg): Drop --pass-through.
2014-08-05 Alan Modra <amodra@gmail.com>
* Makefile.in: Regenerate.
[MIPS] Implement O32 FPXX, FP64 and FP64A ABI extensions Specification: https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking include/ * elf/mips.h (PT_MIPS_ABIFLAGS, SHT_MIPS_ABIFLAGS): Define. (Val_GNU_MIPS_ABI_FP_OLD_64): Rename from Val_GNU_MIPS_ABI_FP_64. (Val_GNU_MIPS_ABI_FP_64): Redefine. (Val_GNU_MIPS_ABI_FP_XX): Define. (Elf_External_ABIFlags_v0, Elf_Internal_ABIFlags_v0): New structures. (AFL_REG_NONE, AFL_REG_32, AFL_REG_64, AFL_REG_128): Define. (AFL_ASE_DSP, AFL_ASE_DSPR2, AFL_ASE_EVA, AFL_ASE_MCU): Likewise. (AFL_ASE_MDMX, AFL_ASE_MIPS3D, AFL_ASE_MT, AFL_ASE_SMARTMIPS): Likewise. (AFL_ASE_VIRT, AFL_ASE_MSA, AFL_ASE_MIPS16): Likewise. (AFL_ASE_MICROMIPS, AFL_ASE_XPA): Likewise. (AFL_EXT_XLR, AFL_EXT_OCTEON2, AFL_EXT_OCTEONP): Likewise. (AFL_EXT_LOONGSON_3A, AFL_EXT_OCTEON, AFL_EXT_5900): Likewise. (AFL_EXT_4650, AFL_EXT_4010, AFL_EXT_4100, AFL_EXT_3900): Likewise. (AFL_EXT_10000, AFL_EXT_SB1, AFL_EXT_4111, AFL_EXT_4120): Likewise. (AFL_EXT_5400, AFL_EXT_5500, AFL_EXT_LOONGSON_2E): Likewise. (AFL_EXT_LOONGSON_2F): Likewise. (bfd_mips_elf_swap_abiflags_v0_in): Prototype. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (bfd_mips_isa_ext): Likewise. bfd/ * elfxx-mips.c (ABI_O32_P, MIPS_ELF_ABIFLAGS_SECTION_NAME_P): New macro. (mips_elf_obj_tdata): Add abiflags and abiflags_valid fields. (bfd_mips_elf_swap_abiflags_v0_in): New function. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (_bfd_mips_elf_section_from_shdr): Handle SHT_MIPS_ABIFLAGS. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_always_size_sections): Handle .MIPS.abiflags. (_bfd_mips_elf_additional_program_headers): Account for new PT_MIPS_ABIFLAGS program header. (_bfd_mips_elf_modify_segment_map): Create PT_MIPS_ABIFLAGS segment and associate with .MIPS.abiflags. (_bfd_mips_elf_gc_mark_extra_sections): New function. (bfd_mips_isa_ext, update_mips_abiflags_isa): New static function. (infer_mips_abiflags): Likewise. (_bfd_mips_elf_final_link): Handle .MIPS.abiflags. (mips_32bit_flags_p): Moved higher. (mips_elf_merge_obj_attributes, _bfd_mips_fp_abi_string): Error checking for FP ABIs. (_bfd_mips_elf_merge_private_bfd_data): Restructure and add abiflags checks. Check EF_MIPS_FP64 flag consistency. (print_mips_ases, print_mips_isa_ext): New static function. (print_mips_fp_abi_value, get_mips_reg_size): Likewise. (_bfd_mips_elf_print_private_bfd_data): Display abiflags data. (_bfd_mips_post_process_headers): Set EI_ABIVERSION = 3 for Val_GNU_MIPS_ABI_FP_64 or Val_GNU_MIPS_ABI_FP_64A. * elfxx-mips.h (_bfd_mips_elf_gc_mark_extra_sections): New prototype. * elf32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elfn32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elf64-mips.c (elf_backend_gc_mark_extra_sections): Implement. binutils/ * readelf.c (get_mips_segment_type): Display name for PT_MIPS_ABIFLAGS. (get_mips_section_type_name): Display name for SHT_MIPS_ABIFLAGS. (display_mips_gnu_attribute): Abstracted fp abi printing to... (print_mips_fp_abi_value): New static function. Handle new FP ABIs. (print_mips_ases, print_mips_isa_ext): New static functions. (get_mips_reg_size): Likewise. (process_mips_specific): Display abiflags data. elfcpp/ * elfcpp.h (PT_MIPS_ABIFLAGS): New program header type. gas/ * config/tc-mips.c (mips_flags_frag): New static global. (struct mips_set_options): Add oddspreg field. (file_mips_opts, mips_opts): Initialize oddspreg. (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and Loongson-3a. (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg and -mno-odd-spreg options. (md_begin): Create .MIPS.abiflags section. (fpabi_incompatible_with, fpabi_requires): New static function. (check_fpabi): Likewise. (mips_check_options): Handle fp=xx and oddspreg restrictions. (file_mips_check_options): Set oddspreg by default for fp=xx. (mips_oddfpreg_ok): Re-write function. (check_regno): Check odd numbered registers regardless of FPR size. For fp != 32 use as_bad instead of as_warn. (match_float_constant): Rewrite check regarding FP register width. Add support for generating constants when MXHC1 is present. Handle fp=xx to comply with the ABI. (macro): Update M_LI_DD similarly to match_float_constant. Generate MTHC1 when available. Check that correct code can be generated for fp=xx and fp=64 ABIs. (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg options. (mips_convert_ase_flags): New static function. (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 to determine when to add the EF_MIPS_FP64 flag. Populate the .MIPS.abiflags section. (md_mips_end): Update .gnu_attribute based on command line and .module as applicable. Use check_fpabi to ensure .gnu.attribute and command line/.module options are consistent. * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new -mfpxx, -modd-spreg and -mno-odd-spreg options. * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, gnu_attribute values and FP ABIs. ld/ * emulparams/elf32bmip.sh: Add .MIPS.abiflags. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf64bmip-defs.sh: Likewise. opcodes/ * micromips-opc.c (COD, LCD) New macros. (cfc1, ctc1): Remove FP_S attribute. (dmfc1, mfc1, mfhc1): Add LCD attribute. (dmtc1, mtc1, mthc1): Add COD attribute. * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. binutils/testsuite/ * binutils-all/readelf.s: Account for .MIPS.abiflags and .gnu.attributes. * binutils-all/readelf.ss-tmips: Likewise. * binutils-all/strip-3.d: Likewise. gas/testsuite/ * gas/mips/attr-gnu-4-0.d: New. * gas/mips/attr-gnu-4-0.s: Likewise. * gas/mips/attr-gnu-4-1-mfp32.l: Likewise. * gas/mips/attr-gnu-4-1-mfp32.s: Likewise. * gas/mips/attr-gnu-4-1-mfp64.l: Likewise. * gas/mips/attr-gnu-4-1-mfp64.s: Likewise. * gas/mips/attr-gnu-4-1-mfpxx.s: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-1.d: Likewise. * gas/mips/attr-gnu-4-1.s: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.l: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.s: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-2.d: Likewise. * gas/mips/attr-gnu-4-2.s: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.l: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.s: Likewise. * gas/mips/attr-gnu-4-3.d: Likewise. * gas/mips/attr-gnu-4-3.s: Likewise. * gas/mips/attr-gnu-4-4.l: Likewise. * gas/mips/attr-gnu-4-4.s: Likewise. * gas/mips/attr-gnu-4-5-64.l: Likewise. * gas/mips/attr-gnu-4-5-64.s: Likewise. * gas/mips/attr-gnu-4-5.d: Likewise. * gas/mips/attr-gnu-4-5.l: Likewise. * gas/mips/attr-gnu-4-5.s: Likewise. * gas/mips/attr-gnu-4-6-64.l: Likewise. * gas/mips/attr-gnu-4-6-64.s: Likewise. * gas/mips/attr-gnu-4-6.d: Likewise. * gas/mips/attr-gnu-4-6.l: Likewise. * gas/mips/attr-gnu-4-6.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-noodd.l: Likewise. * gas/mips/attr-gnu-4-6-noodd.s: Likewise. * gas/mips/attr-gnu-4-7-64.l: Likewise. * gas/mips/attr-gnu-4-7-64.s: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-7-odd.l: Likewise. * gas/mips/attr-gnu-4-7-odd.s: Likewise. * gas/mips/attr-gnu-4-7.d: Likewise. * gas/mips/attr-gnu-4-7.l: Likewise. * gas/mips/attr-gnu-4-7.s: Likewise. * gas/mips/attr-none-double.d: Likewise. * gas/mips/attr-none-o32-fp64.d: Likewise. * gas/mips/attr-none-o32-fp64-nooddspreg.d * gas/mips/attr-none-o32-fpxx.d: Likewise. * gas/mips/attr-none-single-float.d: Likewise. * gas/mips/attr-none-soft-float.d: Likewise. * gas/mips/elf_arch_mips32r3.d: Likewise. * gas/mips/elf_arch_mips32r5.d: Likewise. * gas/mips/elf_arch_mips64r3.d: Likewise. * gas/mips/elf_arch_mips64r5.d: Likewise. * gas/mips/li-d.d: Likewise. * gas/mips/li-d.s: Likewise. * gas/mips/module-check-warn.l: Likewise. * gas/mips/module-check-warn.s: Likewise. * gas/mips/module-check.d: Likewise. * gas/mips/module-check.s: Likewise. * gas/mips/module-mfp32.d: Likewise. * gas/mips/module-mfp32.s: Likewise. * gas/mips/module-mfp64.d: Likewise. * gas/mips/module-mfp64.s: Likewise. * gas/mips/module-mfp64-noodd.d: Likewise. * gas/mips/module-mfp64-noodd.s: Likewise. * gas/mips/module-mfpxx.d: Likewise. * gas/mips/module-mfpxx.s: Likewise. * gas/mips/module-msingle-float.d: Likewise. * gas/mips/module-msingle-float.s: Likewise. * gas/mips/module-msoft-float.d: Likewise. * gas/mips/module-msoft-float.s: Likewise. * gas/mips/module-set-mfpxx.d: Likewise. * gas/mips/module-set-mfpxx.s: Likewise. * gas/mips/fpxx-oddfpreg.d: Likewise. * gas/mips/fpxx-oddfpreg.l: Likewise. * gas/mips/fpxx-oddfpreg.s: Likewise. * gas/mips/no-odd-spreg.d: Likewise. * gas/mips/odd-spreg.d: Likewise. * gas/elf/section2.e-mips: Adjust expected output. * gas/mips/attr-gnu-abi-fp-1.d: Likewise. * gas/mips/attr-gnu-abi-msa-1.d: Likewise. * gas/mips/call-nonpic-1.d: Likewise. * gas/mips/elf_arch_mips1.d: Likewise. * gas/mips/elf_arch_mips2.d: Likewise. * gas/mips/elf_arch_mips3.d: Likewise. * gas/mips/elf_arch_mips32.d: Likewise. * gas/mips/elf_arch_mips32r2.d: Likewise. * gas/mips/elf_arch_mips4.d: Likewise. * gas/mips/elf_arch_mips5.d: Likewise. * gas/mips/elf_arch_mips64.d: Likewise. * gas/mips/elf_arch_mips64r2.d: Likewise. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/elf_ase_micromips.d: Likewise. * gas/mips/elf_ase_mips16-2.d: Likewise. * gas/mips/elf_ase_mips16.d: Likewise. * gas/mips/module-defer-warn1.d: Likewise. * gas/mips/module-override.d: Likewise. * gas/mips/n32-consec.d: Likewise. * gas/mips/nan-2008-1.d: Likewise. * gas/mips/nan-2008-2.d: Likewise. * gas/mips/nan-2008-3.d: Likewise. * gas/mips/nan-2008-4.d: Likewise. * gas/mips/nan-legacy-1.d: Likewise. * gas/mips/nan-legacy-2.d: Likewise. * gas/mips/nan-legacy-3.d: Likewise. * gas/mips/nan-legacy-4.d: Likewise. * gas/mips/nan-legacy-5.d: Likewise. * gas/mips/tmips16-e.d: Likewise. * gas/mips/tmips16-f.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/tmipsel16-f.d: Likewise. * gas/testsuite/gas/mips/mips.exp: Add new tests. ld/testsuite/ * ld-mips-elf/abiflags-strip1-ph.d: New. * ld-mips-elf/abiflags-strip2-ph.d: Likewise. * ld-mips-elf/abiflags-strip3-ph.d: Likewise. * ld-mips-elf/abiflags-strip4-ph.d: Likewise. * ld-mips-elf/abiflags-strip5-ph.d: Likewise. * ld-mips-elf/abiflags-strip6-ph.d: Likewise. * ld-mips-elf/abiflags-strip7-ph.d: Likewise. * ld-mips-elf/abiflags-strip8-ph.d: Likewise. * ld-mips-elf/abiflags-strip9-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-06.d: Likewise. * ld-mips-elf/attr-gnu-4-07.d: Likewise. * ld-mips-elf/attr-gnu-4-08.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-16.d: Likewise. * ld-mips-elf/attr-gnu-4-17.d: Likewise. * ld-mips-elf/attr-gnu-4-18.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-26.d: Likewise. * ld-mips-elf/attr-gnu-4-27.d: Likewise. * ld-mips-elf/attr-gnu-4-28.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-36.d: Likewise. * ld-mips-elf/attr-gnu-4-37.d: Likewise. * ld-mips-elf/attr-gnu-4-38.d: Likewise. * ld-mips-elf/attr-gnu-4-4-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-46.d: Likewise. * ld-mips-elf/attr-gnu-4-47.d: Likewise. * ld-mips-elf/attr-gnu-4-48.d: Likewise. * ld-mips-elf/attr-gnu-4-5-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-50.d: Likewise. * ld-mips-elf/attr-gnu-4-52.d: Likewise. * ld-mips-elf/attr-gnu-4-53.d: Likewise. * ld-mips-elf/attr-gnu-4-54.d: Likewise. * ld-mips-elf/attr-gnu-4-55.d: Likewise. * ld-mips-elf/attr-gnu-4-56.d: Likewise. * ld-mips-elf/attr-gnu-4-57.d: Likewise. * ld-mips-elf/attr-gnu-4-58.d: Likewise. * ld-mips-elf/attr-gnu-4-6-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-6.s: Likewise. * ld-mips-elf/attr-gnu-4-60.d: Likewise. * ld-mips-elf/attr-gnu-4-61.d: Likewise. * ld-mips-elf/attr-gnu-4-62.d: Likewise. * ld-mips-elf/attr-gnu-4-63.d: Likewise. * ld-mips-elf/attr-gnu-4-64.d: Likewise. * ld-mips-elf/attr-gnu-4-65.d: Likewise. * ld-mips-elf/attr-gnu-4-66.d: Likewise. * ld-mips-elf/attr-gnu-4-67.d: Likewise. * ld-mips-elf/attr-gnu-4-68.d: Likewise. * ld-mips-elf/attr-gnu-4-7-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-7.s: Likewise. * ld-mips-elf/attr-gnu-4-70.d: Likewise. * ld-mips-elf/attr-gnu-4-71.d: Likewise. * ld-mips-elf/attr-gnu-4-72.d: Likewise. * ld-mips-elf/attr-gnu-4-73.d: Likewise. * ld-mips-elf/attr-gnu-4-74.d: Likewise. * ld-mips-elf/attr-gnu-4-75.d: Likewise. * ld-mips-elf/attr-gnu-4-76.d: Likewise. * ld-mips-elf/attr-gnu-4-77.d: Likewise. * ld-mips-elf/attr-gnu-4-78.d: Likewise. * ld-mips-elf/attr-gnu-4-8.s: Likewise. * ld-mips-elf/attr-gnu-4-81.d: Likewise. * ld-mips-elf/empty.s: Likewise. * ld-mips-elf/attr-gnu-4-00.d: Adjust expected output. * ld-mips-elf/attr-gnu-4-01.d: Likewise. * ld-mips-elf/attr-gnu-4-02.d: Likewise. * ld-mips-elf/attr-gnu-4-03.d: Likewise. * ld-mips-elf/attr-gnu-4-04.d: Likewise. * ld-mips-elf/attr-gnu-4-05.d: Likewise. * ld-mips-elf/attr-gnu-4-10.d: Likewise. * ld-mips-elf/attr-gnu-4-11.d: Likewise. * ld-mips-elf/attr-gnu-4-14.d: Likewise. * ld-mips-elf/attr-gnu-4-15.d: Likewise. * ld-mips-elf/attr-gnu-4-2.s: Likewise. * ld-mips-elf/attr-gnu-4-20.d: Likewise. * ld-mips-elf/attr-gnu-4-22.d: Likewise. * ld-mips-elf/attr-gnu-4-24.d: Likewise. * ld-mips-elf/attr-gnu-4-25.d: Likewise. * ld-mips-elf/attr-gnu-4-3.s: Likewise. * ld-mips-elf/attr-gnu-4-30.d: Likewise. * ld-mips-elf/attr-gnu-4-33.d: Likewise. * ld-mips-elf/attr-gnu-4-34.d: Likewise. * ld-mips-elf/attr-gnu-4-35.d: Likewise. * ld-mips-elf/attr-gnu-4-40.d: Likewise. * ld-mips-elf/attr-gnu-4-41.d: Likewise. * ld-mips-elf/attr-gnu-4-42.d: Likewise. * ld-mips-elf/attr-gnu-4-43.d: Likewise. * ld-mips-elf/attr-gnu-4-44.d: Likewise. * ld-mips-elf/attr-gnu-4-45.d: Likewise. * ld-mips-elf/attr-gnu-4-5.s: Likewise. * ld-mips-elf/attr-gnu-4-51.d: Likewise. * ld-mips-elf/attr-gnu-8-00.d: Likewise. * ld-mips-elf/attr-gnu-8-01.d: Likewise. * ld-mips-elf/attr-gnu-8-02.d: Likewise. * ld-mips-elf/attr-gnu-8-10.d: Likewise. * ld-mips-elf/attr-gnu-8-11.d: Likewise. * ld-mips-elf/attr-gnu-8-20.d: Likewise. * ld-mips-elf/attr-gnu-8-22.d: Likewise. * ld-mips-elf/jalx-2.dd: Likewise. * ld-mips-elf/mips16-pic-1.gd: Likewise. * ld-mips-elf/mips16-pic-2.gd: Likewise. * ld-mips-elf/mips16-pic-3.gd: Likewise. * ld-mips-elf/mips16-pic-4a.gd: Likewise. * ld-mips-elf/multi-got-no-shared.d: Likewise. * ld-mips-elf/nan-2008.d: Likewise. * ld-mips-elf/nan-legacy.d: Rework test. * ld-mips-elf/pic-and-nonpic-3a.gd: Likewise. * ld-mips-elf/pic-and-nonpic-3b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-5b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-6.ld: Likewise. * ld-mips-elf/rel32-n32.d: Likewise. * ld-mips-elf/rel32-o32.d: Likewise. * ld-mips-elf/rel64.d: Likewise. * ld-mips-elf/tls-multi-got-1.r: Likewise. * ld-elf/group.ld: Discard .MIPS.abiflags and .gnu.attributes. * ld-elf/orphan-region.ld: Likewise. * ld-elf/orphan.ld: Likewise. * ld-mips-elf/compressed-plt-1.ld: Likewise. * ld-mips-elf/dyn-sec64.ld: Likewise. * ld-mips-elf/got-dump-1.ld: Likewise. * ld-mips-elf/got-dump-2.ld: Likewise. * ld-mips-elf/got-page-1.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3a.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-4b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ld: Likewise. * ld-mips-elf/region1.t: Likewise. * ld-mips-elf/stub-dynsym-1.ld: Likewise. * ld-mips-elf/tls-hidden3.ld: Likewise. * ld-mips-elf/vxworks1.ld: Likewise. * ld-scripts/overlay-size.t: Likewise. * ld-mips-elf/elf-rel-got-n32-embed.d: Remove .MIPS.abiflags from objects. * ld-mips-elf/elf-rel-got-n32.d: Likewise. * ld-mips-elf/elf-rel-got-n64-embed.d: Likewise. * ld-mips-elf/elf-rel-got-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-got-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2014-07-29 18:27:59 +08:00
2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
* emulparams/elf32bmip.sh: Add .MIPS.abiflags.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf64bmip-defs.sh: Likewise.
2014-07-27 20:51:20 +08:00
2014-07-27 Anthony Green <green@moxielogic.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add moxiebox support.
(emoxiebox.c): Build.
* configure.tgt (targ_extra_ofiles): Add moxie-*-moxiebox*.
* emulparams/moxiebox.sh (TEXT_START_ADDR): New file.
* Makefile.in: Rebuilt.
2014-07-17 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
* emulparams/elf32or1k_linux.sh (TEXT_START_ADDR): Increase from
0x0 to first page boundary at 0x2000.
2014-07-10 Max Filippov <jcmvbkbc@gmail.com>
* emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
correctly handle missing dot in section name after
".gnu.linkonce.prop.".
2014-07-08 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
* scripttempl/avr.sc: Remove KEEP for .data and
force .bss VMA to end of .data VMA.
2014-07-08 Will Newton <will.newton@linaro.org>
* emulparams/armelf_linux.sh (TEXT_START_ADDR): Increase
alignment to 64kB boundary.
2014-07-04 Alan Modra <amodra@gmail.com>
* configure.ac: Update "configure.in" comments.
* configure: Regenerate.
2014-07-04 Alan Modra <amodra@gmail.com>
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
Use modern AC_INIT in configure.in This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all binutils configure.in files. The BFD version is now in bfd/version.m4 rather than bfd/configure.in, which allows automake to automatically track this dependency. bfd/ * version.m4: New file. * configure.in: Include version.m4. (AC_INIT): Update. * Makefile.am (RELEASE): Delete. (bfdver.h): Depend on development.sh, use instead of RELEASE. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. binutils/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * configure.com: Get bfd version from bfd/version.m4. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. ld/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate.
2014-07-04 10:05:16 +08:00
2014-07-04 Alan Modra <amodra@gmail.com>
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
2014-07-03 Alan Modra <amodra@gmail.com>
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
2014-07-01 Alan Modra <amodra@gmail.com>
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
2014-07-01 Alan Modra <amodra@gmail.com>
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
Add support for the AVR Tiny series of microcontrollers. * archures.c: add avrtiny architecture for avr target. * bfd-in2.h: Regenerate. * cpu-avr.c (arch_info_struct): add avrtiny arch info. * elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16 added for 16 bit LDS/STS instruction of avrtiny arch. (avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to BFD_RELOC_AVR_LDS_STS_16. (bfd_elf_avr_final_write_processing): select machine number avrtiny arch. (elf32_avr_object_p): set machine number for avrtiny arch. * libbfd.h: Regenerate. * reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc. * config/tc-avr.c (mcu_types): Add avrtiny arch. Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20 and attiny40. (md_show_usage): Add avrtiny arch in usage message. (avr_operand): validate and issue error for invalid register for avrtiny. add new reloc exp for 16 bit lds/sts instruction. (md_apply_fix): check 16 bit lds/sts operand for out of range and encode. (md_assemble): check ISA for arch and issue diagnostic. * include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number. (R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number. * include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA. (AVR_ISA_2xxxa): define ISA without LPM. (AVR_ISA_AVRTINY): define avrtiny arch ISA. Add doc for contraint used in 16 bit lds/sts. Adjust ISA group for icall, ijmp, pop and push. Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints. * opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts. (print_insn_avr): do not select opcode if insn ISA is avrtiny and machine is not avrtiny. * Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source. (eavrtiny.c): add rules for avrtiny emulation source. * Makefile.in: Regenerate. * configure.tgt: Add avrtiny to avr target emulations. * scripttempl/avrtiny.sc: New file. linker script template for avrtiny arch. * emulparams/avrtiny.sh: New file. emulation parameters for avrtiny arch.
2014-07-01 17:20:17 +08:00
2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
Pitchumani Sivanupandi <pitchumani.s@atmel.com>
Soundararajan <Sounderarajan.D@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add avrtiny emulation source.
(eavrtiny.c): Add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file. Linker script template for
avrtiny arch.
* emulparams/avrtiny.sh: New file. Emulation parameters for
avrtiny arch.
2014-06-30 Ulrich Drepper <drepper@gmail.com>
* lexsup.c (parse_args): Check whether provided SONAME is empty
string. If yes, warn and ignore it. Don't overwrite valid SONAME
with empty string.
2014-06-26 Linda Zhang <lindasc@qq.com>
* emultempl/pe.em: Initialise insert_timestamp to true.
Add a --no-insert-timestamp command line option.
* emultempl/pep.em: Likewise.
* ld.texinfo: Document that --insert-timestamp is enabled by
default and that it now has an inverse command line option.
* NEWS: Mention the new behaviour.
2014-06-25 Nick Clifton <nickc@redhat.com>
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
2014-06-18 Andreas Tobler <andreast@fgznet.ch>
* configure.tgt (arm*-*-freebsd*): Update targ_extra_emuls.
(arm*b-*-freebsd*): Add target.
* emulparams/armelfb_fbsd.sh: Added.
* emulparams/armelf_fbsd.sh: Updated.
* Makefile.am (ALL_EMULATION_SOURCES): Add earmelfb_fbsd.c.
* Makefile.in: Regenerate.
2014-06-16 Alan Modra <amodra@gmail.com>
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c) Depend on nds32elf.sc.
* Makefile.in: Regenerate.
Don't call bfd_link_hash_table_free Freeing the linker hash table is a royal pain. It can't be freed before the _bfd_write_contents call in bfd_close, because some target bfd_write_contents functions access the hash table. It can't be freed after bfd_close either, since bfd_alloc memory holding side data structures disappears (PR17047). Clearly the only place it can be freed is actually in bfd_close. This patch doesn't do that, but kills off the existing means of freeing the hash table via a bfd target xvec call. bfd/ PR 17047 * targets.c (BFD_JUMP_TABLE): Delete NAME##_bfd_link_hash_table_free. (struct bfd_target <_bfd_link_hash_table_free>): Delete. * bfd.c (bfd_link_hash_table_free): Don't define. * aout-adobe.c, * aout-target.h, * aout-tic30.c, * binary.c, * bout.c, * coff64-rs6000.c, * coffcode.h, * elf-m10300.c, * elf32-arm.c, * elf32-avr.c, * elf32-hppa.c, * elf32-i386.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-metag.c, * elf32-nios2.c, * elf32-sparc.c, * elf32-xgate.c, * elf64-ia64-vms.c, * elf64-ppc.c, * elf64-sparc.c, * elf64-x86-64.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-target.h, * i386msdos.c, * i386os9k.c, * ieee.c, * ihex.c, * libbfd-in.h, * libecoff.h, * mach-o-target.c, * mmo.c, * nlm-target.h, * oasys.c, * pef.c, * plugin.c, * ppcboot.c, * som.c, * srec.c, * tekhex.c, * verilog.c, * versados.c, * vms-alpha.c, * xsym.c: Don't define various link_hash_table_free defines, and remove from bfd_target vars. Temporarily reference some of the target link_hash_table_free functions to avoid warnings. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ PR 17047 * ldlang.c (output_bfd_hash_table_free_fn): Delete. (open_output): Don't set it.. * ldmain.c (ld_cleanup): ..or call it.
2014-06-13 17:41:29 +08:00
2014-06-13 Alan Modra <amodra@gmail.com>
PR 17047
* ldlang.c (output_bfd_hash_table_free_fn): Delete.
(open_output): Don't set it..
* ldmain.c (ld_cleanup): ..or call it.
2014-06-13 Alan Modra <amodra@gmail.com>
* emultempl/cr16elf.em, * emultempl/elf32.em, * emultempl/genelf.em,
* emultempl/m68kcoff.em, * emultempl/m68kelf.em,
* emultempl/nds32elf.em, * emultempl/pe.em, * emultempl/pep.em,
* ldlang.c, * ldmain.c, * pe-dll.c: Update for bfd.link_next change.
2014-06-13 Alan Modra <amodra@gmail.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add enios2elf.c, enios2linux.c.
* Makefile.in: Regenerate.
2014-06-07 Alan Modra <amodra@gmail.com>
* ldexp.c (exp_fold_tree_1 <etree_provide>): Make PROVIDEd
linker script symbol value override a built-in linker symbol.
Make it easy to make --disable-werror the default for both binutils and gdb The goal of this patch is to provide an easy way to make --disable-werror the default when building binutils, or the parts of binutils that need to get built when building GDB. In development mode, we want to continue making -Werror the default with GCC. But, when making releases, I think we want to make it as easy as possible for regular users to successfully build from sources. GDB already has this kind of feature to turn -Werror as well as the use of the libmcheck library. As GDB Release Manager, I take advantage of it to turn those off after having cut the branch. I'd like to be able to do the same for the binutils bits. And perhaps Tristan will want to do the same for his releases too (not sure, binutils builders might be a little savvier than GDB builders). This patch introduces a new file, called development.sh, which just sets a variable called $development. In our development branches (Eg. "master"), it's set to true. But setting it to false would allow us to change the default behavior of various development-related features to be turned off; in this case, it turns off the use of -Werror by default (use --enable-werror to turn it back on). bfd/ChangeLog: * development.sh: New file. * warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh. Make -Werror the default with GCC only if DEVELOPMENT is true. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add $(srcdir)/development.sh. * Makefile.in, configure: Regenerate. binutils/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gas/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gold/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): New. * Makefile.in, configure: Regenerate. gprof/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. ld/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. opcodes/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gdb/ChangeLog: * development.sh: Delete. * Makefile.in (config.status): Adjust dependency on development.sh. * configure.ac: Adjust development.sh source call. * configure: Regenerate. gdb/gdbserver/ChangeLog: * configure.ac: Adjust development.sh source call. * Makefile.in (config.status): Adjust dependency on development.sh. * configure: Regenerate. Tested on x86_64-linux by building two ways: One with DEVELOPMENT set to true, and one with DEVELOPMENT set to false. In the first case, I could see the use of -Werror, while it disappeared in the second case.
2014-05-20 05:46:01 +08:00
2014-06-05 Joel Brobecker <brobecker@adacore.com>
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
2014-06-02 Alan Modra <amodra@gmail.com>
* emulparams/elf32bfin.sh: Rename from bfin.sh.
* emulparams/elf32bfinfd.sh: Update to suit.
* emulparams/msp430.sh: Rename from msp430all.sh. Remove
MSP430_NAME and msp430X vars.
* emulparams/msp430X.sh: New.
* emulparams/score3_elf.sh: Rename from scoreelf.sh. Remove
SCORE_NAME and score7_elf ARCH setting.
* emulparams/score7_elf.sh: New.
* Makefile.am (eelf32bfin.c, eelf32bfinfd.c): Update dependencies.
(emsp430.c, emsp430X.c, escore3_elf.c, escore7_elf.c): Likewise.
* Makefile.in: Regenerate.
* genscripts.sh: Delete customizer_script param.
2014-05-28 Hans-Peter Nilsson <hp@axis.com>
* Makefile.am: Change all rules with ${GENSCRIPTS}
invocations to be just dependencies.
($(ALL_EMULATION_SOURCES) $(ALL_64_EMULATION_SOURCES))
(run-genscripts): New rules.
* Makefile.in: Regenerate.
2014-05-27 DJ Delorie <dj@redhat.com>
* ld/ldemul.h (extra_map_file_text): New field.
(ldemul_extra_map_file_text): Declare.
* ld/ldemul.c (ldemul_extra_map_file_text): Define.
* ld/ldlang.c (lang_map): Call it.
* ld/emultempl/rxelf.em: Add extra_map_file_text hook.
* ld/emultempl/aix.em: Add NULL extra_map_file_text hook.
* ld/emultempl/armcoff.em: Likewise.
* ld/emultempl/beos.em: Likewise.
* ld/emultempl/elf32.em: Likewise.
* ld/emultempl/generic.em: Likewise.
* ld/emultempl/gld960.em: Likewise.
* ld/emultempl/gld960c.em: Likewise.
* ld/emultempl/linux.em: Likewise.
* ld/emultempl/lnk960.em: Likewise.
* ld/emultempl/m68kcoff.em: Likewise.
* ld/emultempl/pe.em: Likewise.
* ld/emultempl/pep.em: Likewise.
* ld/emultempl/sunos.em: Likewise.
* ld/emultempl/ticoff.em: Likewise.
* ld/emultempl/vanilla.em: Likewise.
2014-05-24 Alan Modra <amodra@gmail.com>
* ldlang.c (base): Move variable to..
* mri.c: ..here, and make static.
* ldlang.h (base): Delete declaration.
2014-05-20 Hans-Peter Nilsson <hp@axis.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add missing eelf32mbel_linux.c.
* Makefile.in: Regenerate.
Rewrite ppc32 backend .sdata and .sdata2 handling 1) _SDA_BASE_ and _SDA2_BASE_ and defined automatically, in a similar manner to the way _GLOBAL_OFFSET_TABLE_ is handled. It's a little more complicated to remove the symbols because _SDA_BASE_ needs to be there if either .sdata or .sbss is present, and similarly for _SDA2_BASE. 2) The linker created .sdata and .sdata2 sections used for R_PPC_EMB_SDAI16 and R_PPC_EMB_SDA2I16 pointers are created early. Nowadays we strip unneeded sections from the output, so it isn't necessary to delay creating the sections. 3) The output section for targets of various SDA relocs is now checked as per the ABI(s). We previously allowed .sdata.foo and similar, most likely because at some stage we were checking input sections. Also, the patch fixes a long-standing bug in size_input_sections that affects the values of symbols defined in stripped input sections. PR 16952 bfd/ * elf32-ppc.c (ppc_elf_create_linker_section): Move earlier. Remove redundant setting of htab->elf.dynobj. Don't align. Define .sdata symbols using _bfd_elf_define_linkage_sym. (ppc_elf_create_glink): Call ppc_elf_create_linker_section. (create_sdata_sym): Delete. (elf_allocate_pointer_linker_section): Rename from elf_create_pointer_linker_section. Align section. (ppc_elf_check_relocs): Don't call ppc_elf_creat_linker_section directly here, or create_sdata_sym. Set ref_regular on _SDA_BASE_ and _SDA2_BASE_. (ppc_elf_size_dynamic_sections): Remove ATTRIBUTE_UNUSED on param. Remove unnecessary tests on _SDA_BASE_ sym. (maybe_strip_sdasym, ppc_elf_maybe_strip_sdata_syms): New functions. (ppc_elf_relocate_section): Tighten SDA reloc symbol section checks. * elf32-ppc.h (ppc_elf_set_sdata_syms): Delete. (ppc_elf_maybe_strip_sdata_syms): Declare. ld/ * emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete. * emultempl/ppc32elf.em (ppc_before_allocation): Call ppc_elf_maybe_strip_sdata_syms. * ldlang.c (size_input_section): Correct output_offset value for excluded input sections.
2014-05-20 10:12:42 +08:00
2014-05-20 Alan Modra <amodra@gmail.com>
PR 16952
* emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete.
* emultempl/ppc32elf.em (ppc_before_allocation): Call
ppc_elf_maybe_strip_sdata_syms.
* ldlang.c (size_input_section): Correct output_offset value
for excluded input sections.
2014-05-16 John Marino <binutils@marino.st>
* configure.tgt: Add /lib to dragonfly NATIVE_LIB_DIRS.
2014-05-11 Chung-Lin Tang <cltang@codesourcery.com>
* emulparams/nios2linux.sh (OTHER_GOT_SYMBOLS): Wrap _gp in HIDDEN(),
and gp in PROVIDE_HIDDEN.
2014-05-10 Hans-Peter Nilsson <hp@bitrange.com>
* ldlang.c (lang_finish): Don't call bfd_link_hash_table_free here.
(output_bfd_hash_table_free_fn): New variable.
(open_output): Save the _bfd_link_hash_table_free function for the
output_bfd into output_bfd_hash_table_free_fn.
* ldmain.c (ld_cleanup): If set, call output_bfd_hash_table_free_fn
on link_info.hash.
* ldlang.h (output_bfd_hash_table_free_fn): Declare.
bfd target vector rationalisation This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec. So for example, bfd_elf32_ntradlittlemips_vec becomes mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec. bfd/ * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c, * aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c, * cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c, * coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c, * coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * config.bfd, * configure.com, * configure.in, * demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c, * i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c, * irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c, * makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c, * nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c, * ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c, * pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c, * pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c, * sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c, * sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c, * vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c, * vms-alpha.c, * vms-lib.c: Rename bfd targets to <cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros on aout targets. * configure: Regenerate. binutils/ * emul_aix.c: Update bfd target vector naming. * testsuite/binutils-all/objcopy.exp: Likewise. ld/ * emultempl/metagelf.em: Update bfd target vector naming. * emultempl/nios2elf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise.
2014-05-02 18:39:40 +08:00
2014-05-02 Alan Modra <amodra@gmail.com>
* emultempl/metagelf.em: Update bfd target vector naming.
* emultempl/nios2elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/tic6xdsbt.em: Likewise.
2014-04-22 Christian Svensson <blue@cmd.nu>
* Makefile.am: Remove openrisc and or32 support. Add support for or1k.
* configure.tgt: Likewise.
* emulparams/elf32or1k.sh: New file.
* emulparams/elf32or1k_linux.sh: New file.
* emulparams/elf32openrisc.sh: Delete.
* emulparams/or32.sh: Delete.
* emulparams/or32elf.sh: Delete.
* scripttempl/or32.sc: Delete.
* Makefile.in: Regenerate.
2014-04-21 Richard Henderson <rth@redhat.com>
* emultempl/alphaelf.em (alpha_after_parse): Enable 2 relax passes.
2014-04-16 Steve Ellcey <sellcey@mips.com>
* emultempl/elf32.em: Include safe-ctype.h.
2014-04-16 Steve Ellcey <sellcey@mips.com>
* ldbuildid.c (generate_build_id): Add ATTRIBUTE_UNUSED to size arg.
2014-04-09 Nick Clifton <nickc@redhat.com>
* Makefile.am (default-manifest.o): Remove rule.
(EMUL_EXTRA_BINARIES): Delete.
(ALL_EMUL_EXTRA_BINARIES): Delete.
(ld_new_DEPENDENCIES): Remove EMUL_EXTRA_BINARIES.
(install-data-local): Remove EMUL_EXTRA_BINARIES.
* Makefile.in: Regenerate.
* configure.in (all_emul_extra_binaries): Delete.
(EMUL_EXTRA_BINARIES): Remove.
* configure: Regenerate.
* configure.tgt (target_extra_binaries): Delete.
* emultempl/default-manifest.rc: Delete.
* ld.texinfo: Remove discussion of default manifest.
* emulparams/i386pe.sh (DEFAULT_MANIFEST): Delete.
* emulparams/i386pep.sh (DEFAULT_MANIFEST): Delete.
2014-04-09 Alan Modra <amodra@gmail.com>
* emultempl/spuelf.em: Include safe-ctype.h, remove duplicate errno.h.
* emultempl/nds32elf.em: Include bfd_stdint.h.
* po/POTFILES.in: Regenerate.
2014-04-09 Alan Modra <amodra@gmail.com>
* emultempl/ppc32elf.em (no_zero_padding, ppc_finish): New functions.
(LDEMUL_FINISH): Define.
2014-04-08 Nick Clifton <nickc@redhat.com>
* scripttempl/pe.sc (R_RSRC): Remove default manifest.
* scripttempl/pep.sc (R_RSRC): Remove default manifest.
Add support for generating and inserting build IDs into COFF binaries. * peXXigen.c (pe_print_debugdata): New function: Displays the contents of the debug directory and decodes codeview entries. (_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out) (_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record): Add functions for reading and writing debugdir and codeview records. * libpei.h (_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out) (_bfd_XXi_write_codeview_record): Add prototypes and macros. * libcoff-in.h (pe_tdata): Add build-id data. * libcoff.h: Regenerate. * coffcode.h (coff_write_object_contents): Run build_id after_write_object_contents hook. * pe.h (external_IMAGE_DEBUG_DIRECTORY, _CV_INFO_PDB70) (_CV_INFO_PDB20): Add structures and constants for debug directory and codeview records. * internal.h (internal_IMAGE_DEBUG_DIRECTORY, CODEVIEW_INFO): Add structures and constants for internal representation of debug directory and codeview records. * emultempl/elf32.em (id_note_section_size, read_hex, write_build_id): Move code for parsing build-id option and calculating the build-id to... * ldbuildid.c: New file. * ldbuildid.h: New file. * Makefile.am (CFILES, HFILES, OFILES, ld_new_SOURCES): Add new files. * Makefile.in: Regenerate. * ld.texinfo: Update --build-id description to mention COFF support. * NEWS: Mention support for COFF build ids. * emultempl/pe.em (gld${EMULATION_NAME}_handle_option): (pecoff_checksum_contents, write_build_id, setup_build_id) (gld_${EMULATION_NAME}_after_open): Handle and implement build-id option. * emultempl/pep.em: Likewise.
2014-04-08 17:59:43 +08:00
2014-04-08 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/elf32.em (id_note_section_size, read_hex, write_build_id):
Move code for parsing build-id option and calculating the build-id to...
* ldbuildid.c: New file.
* ldbuildid.h: New file.
* Makefile.am (CFILES, HFILES, OFILES, ld_new_SOURCES): Add new
files.
* Makefile.in: Regenerate.
* ld.texinfo: Update --build-id description to mention COFF
support.
* NEWS: Mention support for COFF build ids.
* emultempl/pe.em (gld${EMULATION_NAME}_handle_option):
(pecoff_checksum_contents, write_build_id, setup_build_id)
(gld_${EMULATION_NAME}_after_open): Handle and implement
build-id option.
* emultempl/pep.em: Likewise.
2014-04-04 Cary Coutant <ccoutant@google.com>
PR gold/16804
* ld.texinfo: Document optional comma following output section
command and overlay command.
2014-04-04 Alan Modra <amodra@gmail.com>
* ldlang.c (lang_size_sections_1 <lang_input_section_enum>): Use
current "fill", not "output_section_statement->fill".
2014-03-31 Nick Clifton <nickc@redhat.com>
PR ld/16744
* emultempl/elf32.em (_after_open): Create a .note.GNU-stack
section when performing a relocatable link with -z [no]execstack
specified.
2014-03-27 H.J. Lu <hongjiu.lu@intel.com>
PR ld/16756
* ldmain.c (symbol_warning): New function.
(warning_callback): Use it. Scan all input files for a reference
to SYMBOL.
2014-03-21 Christopher Faylor <me.cygwin2013@cgf.cx>
* ld.texinfo: Document change in handling of --enable-auto-image-base.
* emultempl/pe.em (pe_auto_image_base): Set to default base.
(gld_${EMULATION_NAME}_list_options): Change usage message to reflect
optional --enable-auto-image-base argument.
(gld${EMULATION_NAME}_handle_option): Handle optional
--enable-auto-image-base argument.
(compute_dll_image_base): Eliminate constant. Use pe_auto_image_base.
2014-03-19 Nick Clifton <nickc@redhat.com>
* Makefile.am (default-manifest.o): Use WINDRES_FOR_TARGET.
* Makefile.in: Regenerate.
* emultempl/default-manifest.rc: Fix typo.
* scripttempl/pe.sc (R_RSRC): Fix default-manifest exclusion.
(.rsrc): Add SUBALIGN(4). Remove SORT.
* scripttempl/pep.sc: Likewise.
2014-03-17 Christopher Faylor <me.cygwin2014@cgf.cx>
* Makefile.am: Use host version of windres.
* Makefile.in: Regenerate.
2014-03-14 Romain Geissler <romain.geissler@amadeus.com>
Alan Modra <amodra@gmail.com>
* ldlang.h (full_name_provided): New input flag.
* ldlang.c (new_afile): Don't use lang_input_file_is_search_file_enum
for -l:namespec. Instead use lang_input_file_is_l_enum with
full_name_provided flag.
* ldlfile.c (ldfile_open_file_search): Don't complete lib name if
full_name_provided flag is set.
* emultempl/elf32.em (gld${EMULATION_NAME}_open_dynamic_archive):
Handle full_name_provided libraries. Tidy EXTRA_SHLIB_EXTENSION
support. Set DT_NEEDED for -l:namespec as namespec.
* emultempl/aix.em (ppc_after_open_output): Handle full_name_provided.
* emultempl/linux.em (gld${EMULATION_NAME}_open_dynamic_archive):
Don't handle full_name_provided libraries.
* emultempl/pe.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
* emultempl/pep.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
* emultempl/vms.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
2014-03-12 Alan Modra <amodra@gmail.com>
* Makefile.in: Regenerate.
2014-03-05 19:46:15 +08:00
2014-03-05 Alan Modra <amodra@gmail.com>
Update copyright years.
2014-03-04 Nick Clifton <nickc@redhat.com>
* Makefile.am (ALL_EMUL_EXTRA_BINARIES): Remove default-manifest.
* Makefile.in: Regenerate.
2014-02-27 Yuri Gribov <y.gribov@samsung.com>
* emultempl/armelf.em (OPTION_LONG_PLT): Define.
(PARSE_AND_LIST_LONGOPTS): Add long-plt.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Handle long-plt.
* ld.texinfo: Document --long-plt.
2014-02-27 Alan Modra <amodra@gmail.com>
* emulparams/elf32ppcvxworks.sh: Source plt_unwind.sh and
use ppc32elf.em.
* emultempl/ppc32elf.em (ppc_after_open): Don't compile for
vxworks.
(LDEMUL_AFTER_OPEN): Don't set for vxworks.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Exclude
-secure-plt, -bss-plt and -sdata-got when vxworks.
2014-02-27 Nick Clifton <nickc@redhat.com>
* configure.in (all_emul_extra_binaries): New variable. Populated
by invoking configure.tgt.
(EMUL_EXTRA_BINARIES): New substitution.
* configure: Regenerate.
* configure.tgt (target_extra_binaries): New variable. Set to
default-manifest.o for Cygwin and MinGW targets.
* Makefile.am (EMUL_EXTRA_BINARIES): New variable. Initialised
by the configure script.
(ALL_EMUL_EXTRA_BINARIES): New variable.
(default-manifest.o): New rule to build the default manifest.
(ld_new_DEPENDENCIES): Add EMUL_EXTRA_BINARIES.
(install-data-local): Add EMUL_EXTRA_BINARIES.
* Makefile.in: Regenerate.
* ld.texinfo: Document default manifest support.
* emulparams/i386pe.sh (DEFAULT_MANIFEST): Define.
* emulparams/i386pep.sh (DEFAULT_MANIFEST): Define.
* emultempl/default-manifest.rc: New file.
* scripttempl/pe.sc (R_RSRC): Include DEFAULT_MANIFEST, if defined.
* scripttempl/pep.sc (R_RSRC): Likewise.
2014-02-26 Dan Mick <dan.mick@inktank.com>
PR ld/16569
* ldcref.c (cref_sort_array): Compare unmangled names unless
demanglng has been requiested.
(output_one_cref): Output unmangled name unless demangling has
been requested.
Create the second PLT for BND relocations Intel MPX introduces 4 bound registers, which will be used for parameter passing in x86-64. Bound registers are cleared by branch instructions. Branch instructions with BND prefix will keep bound register contents. This leads to 2 requirements to 64-bit MPX run-time: 1. Dynamic linker (ld.so) should save and restore bound registers during symbol lookup. 2. Change the current 16-byte PLT0: ff 35 08 00 00 00 pushq GOT+8(%rip) ff 25 00 10 00 jmpq *GOT+16(%rip) 0f 1f 40 00 nopl 0x0(%rax) and 16-byte PLT1: ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip) 68 00 00 00 00 pushq $index e9 00 00 00 00 jmpq PLT0 which clear bound registers, to preserve bound registers. We use 2 new relocations: to mark branch instructions with BND prefix. When linker sees any R_X86_64_PC32_BND or R_X86_64_PLT32_BND relocations, it switches to a different PLT0: ff 35 08 00 00 00 pushq GOT+8(%rip) f2 ff 25 00 10 00 bnd jmpq *GOT+16(%rip) 0f 1f 00 nopl (%rax) to preserve bound registers for symbol lookup and it also creates an external PLT section, .pl.bnd. Linker will create a BND PLT1 entry in .plt: 68 00 00 00 00 pushq $index f2 e9 00 00 00 00 bnd jmpq PLT0 0f 1f 44 00 00 nopl 0(%rax,%rax,1) and a 8-byte BND PLT entry in .plt.bnd: f2 ff 25 00 00 00 00 bnd jmpq *name@GOTPCREL(%rip) 90 nop Otherwise, linker will create a legacy PLT1 entry in .plt: 68 00 00 00 00 pushq $index e9 00 00 00 00 jmpq PLT0 66 0f 1f 44 00 00 nopw 0(%rax,%rax,1) and a 8-byte legacy PLT in .plt.bnd: ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip) 66 90 xchg %ax,%ax The initial value of the GOT entry for "name" will be set to the the "pushq" instruction in the corresponding entry in .plt. Linker will resolve reference of symbol "name" to the entry in the second PLT, .plt.bnd. Prelink stores the offset of pushq of PLT1 (plt_base + 0x10) in GOT[1] and GOT[1] is stored in GOT[3]. We can undo prelink in GOT by computing the corresponding the pushq offset with GOT[1] + (GOT offset - &GOT[3]) * 2 Since for each entry in .plt except for PLT0 we create a 8-byte entry in .plt.bnd, there is extra 8-byte per PLT symbol. We also investigated the 16-byte entry for .plt.bnd. We compared the 8-byte entry vs the the 16-byte entry for .plt.bnd on Sandy Bridge. There are no performance differences in SPEC CPU 2000/2006 as well as micro benchmarks. Pros: No change to undo prelink in dynamic linker. Only 8-byte memory overhead for each PLT symbol. Cons: Extra .plt.bnd section is needed. Extra 8 byte for legacy branches to PLT. GDB is unware of the new layout of .plt and .plt.bnd. bfd/ * elf64-x86-64.c (elf_x86_64_bnd_plt0_entry): New. (elf_x86_64_legacy_plt_entry): Likewise. (elf_x86_64_bnd_plt_entry): Likewise. (elf_x86_64_legacy_plt2_entry): Likewise. (elf_x86_64_bnd_plt2_entry): Likewise. (elf_x86_64_bnd_arch_bed): Likewise. (elf_x86_64_link_hash_entry): Add has_bnd_reloc and plt_bnd. (elf_x86_64_link_hash_table): Add plt_bnd. (elf_x86_64_link_hash_newfunc): Initialize has_bnd_reloc and plt_bnd. (elf_x86_64_copy_indirect_symbol): Also copy has_bnd_reloc. (elf_x86_64_check_relocs): Create the second PLT for Intel MPX in 64-bit mode. (elf_x86_64_allocate_dynrelocs): Handle the second PLT for IFUNC symbols. Resolve call to the second PLT if it is created. (elf_x86_64_size_dynamic_sections): Keep the second PLT section. (elf_x86_64_relocate_section): Resolve PLT references to the second PLT if it is created. (elf_x86_64_finish_dynamic_symbol): Use BND PLT0 and fill the second PLT entry for BND relocation. (elf_x86_64_finish_dynamic_sections): Use MPX backend data if the second PLT is created. (elf_x86_64_get_synthetic_symtab): New. (bfd_elf64_get_synthetic_symtab): Likewise. Undefine for NaCl. ld/ * emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): New. ld/testsuite/ * ld-x86-64/mpx.exp: Run bnd-ifunc-1 and bnd-plt-1. * ld-x86-64/bnd-ifunc-1.d: New file. * ld-x86-64/bnd-ifunc-1.s: Likewise. * ld-x86-64/bnd-plt-1.d: Likewise.
2013-11-21 01:01:04 +08:00
2014-02-19 Igor Zamyatin <igor.zamyatin@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): New.
2014-02-19 Alan Modra <amodra@gmail.com>
* emultempl/ppc64elf.em (params): Init new field.
(ppc_create_output_section_statements): Set params.save_restore_funcs
default.
(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
--no-save-restore-funcs.
2014-02-17 Alan Modra <amodra@gmail.com>
* emultemps/ppc64elf.em (params): New static struct replacing
various other static vars. Adjust code throughout file.
2014-02-17 Alan Modra <amodra@gmail.com>
* emultempl/ppc32elf.em (ppc_after_open_output): Really enable
ppc476 workaround for ld -r.
2014-02-12 Alan Modra <amodra@gmail.com>
* emultempl/ppc32elf.em (pagesize): New static var.
(ppc_after_open_output): Set params.pagesize_p2 from pagesize.
(PARSE_AND_LIST_ARGS_CASES): Adjust to use pagesize.
2014-02-11 Andrew Pinski <apinski@cavium.com>
* emulparams/aarch64linux32.sh (LIBPATH_SUFFIX): Change to ilp32.
(ELF_INTERPRETER_NAME): Define.
* emulparams/aarch64linux32b.sh (ELF_INTERPRETER_NAME): Define.
2014-02-10 Alan Modra <amodra@gmail.com>
* po/ld.pot: Regenerate.
ppc476 icache bug workaround This implements a work-around for an icache bug on 476 that can cause execution of stale instructions when control falls through from one page to the next. The idea is to prevent such fall-through by replacing the last instruction on a page with a branch to a patch area containing the instruction, then branch to the next page. The patch also fixes a number of bugs in the existing support for long branch trampolines. bfd/ * elf32-ppc.c (struct ppc_elf_link_hash_table): Add params. Delete emit_stub_syms, no_tls_get_addr_opt. Update all uses. (ppc_elf_link_params): New function. (ppc_elf_create_glink): Align .glink to 64 bytes for ppc476 workaround. (ppc_elf_select_plt_layout): Remove plt_style and emit_stub_syms parameters. Use htab->params instead. (ppc_elf_tls_setup): Remove no_tls_get_addr_opt parameter. (ppc_elf_size_dynamic_sections): Align __glink_PLTresolve to 64 bytes for ppc476 workaround. (struct ppc_elf_relax_info): New. (ppc_elf_relax_section): Exclude linker created sections and those too small to hold one instruction. Don't add another branch around trampolines on later relax passes. Don't generate trampolines for undefined symbols when !relocatable, nor for plugin symbols. Allocate space for ppc476 workaround patch area. Free fixups on error return path. (ppc_elf_relocate_section): Handle ppc476 workaround patching. * elf32-ppc.h (struct ppc_elf_params): New. (ppc_elf_select_plt_layout, ppc_elf_tls_setup): Update prototype. (ppc_elf_link_params): Declare. * section.c (SEC_INFO_TYPE_TARGET): Define. * bfd-in2.h: Regenerate. ld/ * emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms) plt_style): Delete. Adjust all refs to instead use.. (params): ..this. New variable. (ppc_after_open_output): New function. Tweak params and pass to ppc_elf_link_params. (ppc_after_open): Adjust ppc_elf_select_plt_layout call. (ppc_before_allocation): Adjust ppc_elf_tls_setup call. Enable relaxation for ppc476 workaround. (PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support. (LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
2014-01-30 05:56:02 +08:00
2014-02-03 Alan Modra <amodra@gmail.com>
* emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms)
plt_style): Delete. Adjust all refs to instead use..
(params): ..this. New variable.
(ppc_after_open_output): New function. Tweak params and pass to
ppc_elf_link_params.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(ppc_before_allocation): Adjust ppc_elf_tls_setup call. Enable
relaxation for ppc476 workaround.
(PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
2014-02-02 Sebastian Huber <sebastian.huber@embedded-brains.de>
* ld/ld.texinfo: Change ALIGN_WITH_INPUT documentation.
* ld/ldlang.c (lang_size_sections_1): Add dotdelta
variable which reflects the VMA change due to alignment
requirements. Use dotdelta do change the LMA if
ALIGN_WITH_INPUT is requested.
2014-02-01 Hans-Peter Nilsson <hp@bitrange.com>
* emultempl/mmix-elfnmmo.em (mmix_after_allocation): Fix typo in
call to bfd_set_section_vma exposed by recent bfd_set_section_vma
change.
Nios II CALL26 linker relaxation 2014-01-30 Sandra Loosemore <sandra@codesourcery.com> bfd/ * bfd-in2.h: Update from reloc.c. * elf32-nios2.c: Include elf32-nios2.h. (elf_nios2_howto_table_rel): Add entry for R_NIOS2_CALL26_NOAT. (nios2_reloc_map): Likewise. (enum elf32_nios2_stub_type): Declare. (struct elf32_nios2_stub_hash_entry): Declare. (nios2_stub_hash_entry, nios2_stub_hash_lookup): New macros. (struct elf32_nios2_link_hash_entry): Add hsh_cache field. (struct elf32_nios2_link_hash_table): Add new fields bstab, stub_bfd, add_stub_section, layout_sections_again, stub_group, bfd_count, top_index, input_list, all_local_syms. (nios2_call26_stub_entry): New. (nios2_elf32_install_imm16): Move up in file. (nios2_elf32_install_data): Move up in file. (hiadj): Move up in file. (stub_hash_newfunc): New. (link_hash_newfunc): Initialize hsh_cache field. (STUB_SUFFIX): New. (nios2_stub_name): New. (nios2_get_stub_entry): New. (nios2_add_stub): New. (nios2_elf32_setup_section_lists): New. (nios2_elf32_next_input_section): New. (CALL26_SEGMENT): New. (MAX_STUB_SECTION_SIZE): New. (group_sections): New. (nios2_type_of_stub): New. (nios2_build_one_stub): New. (nios2_size_one_stub): New. (get_local_syms): New. (nios2_elf32_size_stubs): New. (nios2_elf32_build_stubs): New. (nios2_elf32_do_call26_relocate): Correct CALL26 overflow test. (nios2_elf32_relocate_section): Handle R_NIOS2_CALL26_NOAT. Add trampolines for R_NIOS2_CALL26 stubs. (nios2_elf32_check_relocs): Handle R_NIOS2_CALL26_NOAT. (nios2_elf32_gc_sweep_hook): Likewise. (nios2_elf32_link_hash_table_create): Initialize the stub hash table. (nios2_elf32_link_hash_table_free): New. (bfd_elf32_bfd_link_hash_table_free): Define. * elf32-nios2.h: New file. * libbfd.h: Update from reloc.c. * reloc.c (BFD_RELOC_NIOS2_CALL26_NOAT): New. gas/ * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT. (nios2_assemble_args_m): Likewise. (md_assemble): Likewise. gas/testsuite/ * gas/nios2/call26_noat.d: New. * gas/nios2/call26_noat.s: New. * gas/nios2/call_noat.d: New. * gas/nios2/call_noat.s: New. include/elf/ * nios2.h (elf_nios2_reloc_type): Add R_NIOS2_CALL26_NOAT. ld/ * Makefile.am (enios2elf.c, enios2linux.c): Update dependencies. * Makefile.in: Regenerated. * emulparams/nios2elf.sh (EXTRA_EM_FILE): Set. * emulparams/nios2linux.sh (EXTRA_EM_FILE): Set. * emultempl/nios2elf.em: New file. * gen-doc.texi (NIOSII): Set. * ld.texinfo (NIOSII): Set. ld/testsuite/ * ld-nios2/relax_call26.s: New. * ld-nios2/relax_call26_boundary.ld: New. * ld-nios2/relax_call26_boundary.s: New. * ld-nios2/relax_call26_boundary_c8.d: New. * ld-nios2/relax_call26_boundary_cc.d: New. * ld-nios2/relax_call26_boundary_d0.d: New. * ld-nios2/relax_call26_boundary_d4.d: New. * ld-nios2/relax_call26_boundary_d8.d: New. * ld-nios2/relax_call26_boundary_dc.d: New. * ld-nios2/relax_call26_boundary_f0.d: New. * ld-nios2/relax_call26_boundary_f4.d: New. * ld-nios2/relax_call26_boundary_f8.d: New. * ld-nios2/relax_call26_boundary_fc.d: New. * ld-nios2/relax_call26_cache.d: New. * ld-nios2/relax_call26_cache.ld: New. * ld-nios2/relax_call26_cache.s: New. * ld-nios2/relax_call26_multi.d: New. * ld-nios2/relax_call26_multi.ld: New. * ld-nios2/relax_call26_norelax.d: New. * ld-nios2/relax_call26_shared.d: New. * ld-nios2/relax_call26_shared.ld: New.
2014-01-31 09:47:07 +08:00
2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
* Makefile.am (enios2elf.c, enios2linux.c): Update dependencies.
* Makefile.in: Regenerated.
* emulparams/nios2elf.sh (EXTRA_EM_FILE): Set.
* emulparams/nios2linux.sh (EXTRA_EM_FILE): Set.
* emultempl/nios2elf.em: New file.
* gen-doc.texi (NIOSII): Set.
* ld.texinfo (NIOSII): Set.
2014-01-28 Nick Clifton <nickc@redhat.com>
* Makefile.am: Remove obsolete MSP430 emulations.
* configure.tgt: Likewise.
* emulparams/msp430all.sh: Likewise.
* Makefile.in: Regenerate.
2014-01-24 H.J. Lu <hongjiu.lu@intel.com>
PR ld/16498
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Improve
orphaned TLS section handling.
2014-01-24 Alan Modra <amodra@gmail.com>
* ldlang.c (lang_output_section_find_by_flags): Be careful to
test look->bfd_section->flags if available rather than
look->flags. Separate SEC_THREAD_LOCAL handling from
SEC_READONLY loop, and rewrite.
2014-01-22 Alan Modra <amodra@gmail.com>
* ldlang.c (asneeded_list_head, asneeded_list_tail): New vars.
(lang_init): Initialise them.
(lang_print_asneeded): New function.
(lang_process): Call lang_print_asneeded.
* ldlang.h (struct asneeded_minfo): New.
(asneeded_list_tail): Declare.
* ldmain.c (add_archive_element): Improve archive map heading.
* ldmisc.c (minfo): Stash --as-needed info.
2014-01-22 Alan Modra <amodra@gmail.com>
* ld.h (struct map_symbol_def): Move to..
* ldlang.h: ..here.
* ldlang.c (print_assignment): Don't set expld.assign_name to dot.
Make assignments to dot keep an empty output section. An assignment to dot in an output section that allocates space of course keeps the output section. Here, I'm changing the behaviour for assignments that don't allocate space. The idea is not so much to allow people to force output of an empty section with ". = .", but to fix cases where an otherwise empty section has padding added by an alignment expression that changes with relaxation or .eh_frame editing. Such a section might have zero size before relaxation and so be stripped incorrectly. ld/ * ld.texinfo (Output Section Discarding): Mention assigning to dot as a way of keeping otherwise empty sections. * ldexp.c (is_dot, is_value, is_sym_value, is_dot_ne_0, is_dot_plus_0, is_align_conditional): New predicates. (exp_fold_tree_1): Set SEC_KEEP when assigning to dot inside an output section, except for some special cases. * scripttempl/elfmicroblaze.sc: Use canonical form to align at end of .heap and .stack. ld/testsuite/ * ld-shared/elf-offset.ld: Align end of .bss with canonical form of ALIGN that allows an empty .bss to be removed. * ld-arm/arm-dyn.ld: Likewise. * ld-arm/arm-lib.ld: Likewise. * ld-elfvsb/elf-offset.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-arm/arm-no-rel-plt.ld: Remove duplicate ALIGN. * ld-powerpc/vle-multiseg-1.ld: Remove ALIGN at start of section. ALIGN address of section instead. * ld-powerpc/vle-multiseg-2.ld: Likewise. * ld-powerpc/vle-multiseg-3.ld: Likewise. * ld-powerpc/vle-multiseg-4.ld: Likewise. * ld-powerpc/vle-multiseg-6.ld: Likewise. * ld-scripts/empty-aligned.d: Check section headers not program headers. Remove xfail and notarget. * ld-scripts/empty-aligned.t: Use canonical ALIGN for end of .text2.
2014-01-22 09:13:03 +08:00
2014-01-22 Alan Modra <amodra@gmail.com>
* ld.texinfo (Output Section Discarding): Mention assigning to dot
as a way of keeping otherwise empty sections.
* ldexp.c (is_dot, is_value, is_sym_value, is_dot_ne_0,
is_dot_plus_0, is_align_conditional): New predicates.
(exp_fold_tree_1): Set SEC_KEEP when assigning to dot inside an
output section, except for some special cases.
* scripttempl/elfmicroblaze.sc: Use canonical form to align at
end of .heap and .stack.
2014-01-21 02:20:04 +08:00
2014-01-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* emulparams/aarch64linuxb.sh (ELF_INTERPRETER_NAME): Define.
2014-01-21 02:18:52 +08:00
2014-01-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* emulparams/aarch64linux.sh (ELF_INTERPRETER_NAME): Define.
2014-01-20 Alan Modra <amodra@gmail.com>
* ldlang.h (struct lang_definedness_hash_entry): Add by_object and
by_script. Make iteration a single bit field.
(lang_track_definedness, lang_symbol_definition_iteration): Delete.
(lang_symbol_defined): Declare.
* ldlang.c (lang_statement_iteration): Expand comment a little.
(lang_init <lang_definedness_table>): Make it bigger.
(lang_track_definedness, lang_symbol_definition): Delete.
(lang_definedness_newfunc): Update.
(lang_symbol_defined): New function.
(lang_update_definedness): Create entries here. Do track whether
script definition of symbol is valid, even when also defined in
an object file.
* ldexp.c (fold_name <DEFINED>): Update.
(fold_name <NAME>): Allow self-assignment for absolute symbols
defined in a linker script.
2014-01-20 Guy Martin <gmsoft@tuxicoman.be>
Alan Modra <amodra@gmail.com>
* ldlang.h (lang_output_section_get): Define.
* ldlang.c (lang_output_section_get): Likewise.
(init_os): Set the output_section userdata to the output
section statement.
* emultempl/hppaelf.em: Use lang_output_section_get instead of
lang_output_section_find where applicable.
* emultempl/aarch64elf.em: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/m68hc1xelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/mipself.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
2014-01-17 Alan Modra <amodra@gmail.com>
* genscripts.sh (COMPILE_IN): Don't set if already set.
* emulparams/nds32elf.sh: Don't clear EMULATION_LIBPATH, set
COMPILE_IN=no.
* emulparams/nds32elf16m.sh: Likewise.
* emulparams/nds32elf_linux.sh: Likewise.
* emultempl/aix.em: Test COMPILE_IN value is "yes".
* emultempl/armcoff.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/generic.em: Likewise.
* emultempl/gld960.em: Likewise.
* emultempl/gld960c.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/lnk960.em: Likewise.
* emultempl/m68kcoff.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/ticoff.em: Likewise.
2014-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/16456
* genscripts.sh: Don't search directory with LIBPATH_SUFFIX_SKIP
suffix.
* emulparams/elf32_x86_64.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf32_x86_64 emulation.
* emulparams/elf_i386.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf_i386 emulation.
2014-01-16 Alan Modra <amodra@gmail.com>
* ld.h (fat_section_userdata_type, get_userdata): Move to..
* ldlang.h (input_section_userdata_type, get_userdata): ..here.
* ldlang.c (init_map_userdata): Delete. Fold into..
(sort_def_symbol): ..here. Don't attach input section userdata
to output sections or global bfd sections.
(lang_map): Don't pre-allocate input section userdata.
(init_os): Don't allocate userdata for output sections.
(print_all_symbols): Update.
2014-01-15 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Silence uninitialized warning on ehdr_start_save with older
GCC.
2014-01-15 Alan Modra <amodra@gmail.com>
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Define
__ehdr_start before size_dynamic_sections and restore afterwards.
2014-01-10 Alan Modra <amodra@gmail.com>
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Remove unneeded RELRO base
adjust. Tidy comments.
* ld.texinfo (DATA_SEGMENT_RELRO_END): Correct description.
2014-01-10 Hans-Peter Nilsson <hp@axis.com>
* emulparams/crislinux.sh (COMMONPAGESIZE): Define.
2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2014.
2014-01-08 21:32:12 +08:00
For older changes see ChangeLog-2013
1999-05-03 15:29:11 +08:00
2014-01-08 21:32:12 +08:00
Copyright (C) 2014 Free Software Foundation, Inc.
2012-12-10 20:48:03 +08:00
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
1999-05-03 15:29:11 +08:00
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: