Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
/* A safe iterator for GDB, the GNU debugger.
|
2024-01-12 23:30:44 +08:00
|
|
|
Copyright (C) 2018-2024 Free Software Foundation, Inc.
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
2019-01-28 03:51:36 +08:00
|
|
|
#ifndef COMMON_SAFE_ITERATOR_H
|
|
|
|
#define COMMON_SAFE_ITERATOR_H
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
2023-10-13 20:39:55 +08:00
|
|
|
#include <type_traits>
|
2023-05-09 02:49:33 +08:00
|
|
|
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
/* A forward iterator that wraps Iterator, such that when iterating
|
|
|
|
with iterator IT, it is possible to delete *IT without invalidating
|
|
|
|
IT. Suitably wrapped in a range type and used with range-for, this
|
|
|
|
allow convenient patterns like this:
|
|
|
|
|
|
|
|
// range_safe() returns a range type whose begin()/end() methods
|
|
|
|
// return safe iterators.
|
|
|
|
for (foo *f : range_safe ())
|
|
|
|
{
|
|
|
|
if (f->should_delete ())
|
|
|
|
{
|
|
|
|
// The ++it operation implicitly done by the range-for is
|
|
|
|
// still OK after this.
|
|
|
|
delete f;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
*/
|
|
|
|
|
|
|
|
template<typename Iterator>
|
|
|
|
class basic_safe_iterator
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
typedef basic_safe_iterator self_type;
|
|
|
|
typedef typename Iterator::value_type value_type;
|
|
|
|
typedef typename Iterator::reference reference;
|
|
|
|
typedef typename Iterator::pointer pointer;
|
|
|
|
typedef typename Iterator::iterator_category iterator_category;
|
|
|
|
typedef typename Iterator::difference_type difference_type;
|
|
|
|
|
gdb: make all_inferiors_safe actually work
The test gdb.threads/fork-plus-threads.exp fails since 08bdefb58b78
("gdb: make inferior_list use intrusive_list"):
FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
Looking at the log, we see that we are left with a bunch of inferiors in
the detach-on-fork=off case:
info inferiors^M
Num Description Connection Executable ^M
* 1 <null> <snip>/fork-plus-threads ^M
2 <null> <snip>/fork-plus-threads ^M
3 <null> <snip>/fork-plus-threads ^M
4 <null> <snip>/fork-plus-threads ^M
5 <null> <snip>/fork-plus-threads ^M
6 <null> <snip>/fork-plus-threads ^M
7 <null> <snip>/fork-plus-threads ^M
8 <null> <snip>/fork-plus-threads ^M
9 <null> <snip>/fork-plus-threads ^M
10 <null> <snip>/fork-plus-threads ^M
11 <null> <snip>/fork-plus-threads ^M
(gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
when we expect to have just one. The problem is prune_inferiors not
pruning inferiors. And this is caused by all_inferiors_safe not
actually iterating on inferiors. The current implementation:
inline all_inferiors_safe_range
all_inferiors_safe ()
{
return {};
}
default-constructs an all_inferiors_safe_range, which default-constructs
an all_inferiors_safe_iterator as its m_begin field, which
default-constructs a all_inferiors_iterator. A default-constructed
all_inferiors_iterator is an end iterator, which means we have
constructed an (end,end) all_inferiors_safe_range.
We actually need to pass down the list on which we want to iterator
(that is the inferior_list global), so that all_inferiors_iterator's
first constructor is chosen. We also pass nullptr as the proc_target
filter. In this case, we don't do any filtering, but if in the future
all_inferiors_safe needed to allow filtering on process target (like
all_inferiors does), we could pass down a process target pointer.
basic_safe_iterator's constructor needs to be changed to allow
constructing the wrapped iterator with multiple arguments, not just one.
With this, gdb.threads/fork-plus-threads.exp is passing once again for
me.
Change-Id: I650552ede596e3590c4b7606ce403690a0278a01
2021-07-15 00:31:36 +08:00
|
|
|
/* Construct the begin iterator using the given arguments; the end iterator is
|
|
|
|
default constructed. */
|
|
|
|
template<typename... Args>
|
|
|
|
explicit basic_safe_iterator (Args &&...args)
|
|
|
|
: m_it (std::forward<Args> (args)...),
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
m_next (m_it)
|
|
|
|
{
|
|
|
|
if (m_it != m_end)
|
|
|
|
++m_next;
|
|
|
|
}
|
|
|
|
|
2019-11-04 01:38:36 +08:00
|
|
|
/* Construct the iterator using the first argument, and construct
|
|
|
|
the end iterator using the second argument. */
|
|
|
|
template<typename Arg>
|
|
|
|
explicit basic_safe_iterator (Arg &&arg, Arg &&arg2)
|
|
|
|
: m_it (std::forward<Arg> (arg)),
|
|
|
|
m_next (m_it),
|
|
|
|
m_end (std::forward<Arg> (arg2))
|
|
|
|
{
|
|
|
|
if (m_it != m_end)
|
|
|
|
++m_next;
|
|
|
|
}
|
|
|
|
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
/* Create a one-past-end iterator. */
|
|
|
|
basic_safe_iterator ()
|
|
|
|
{}
|
|
|
|
|
2023-10-13 20:39:55 +08:00
|
|
|
typename std::invoke_result<decltype(&Iterator::operator*), Iterator>::type
|
2023-05-09 02:49:33 +08:00
|
|
|
operator* () const
|
|
|
|
{ return *m_it; }
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
self_type &operator++ ()
|
|
|
|
{
|
|
|
|
m_it = m_next;
|
|
|
|
if (m_it != m_end)
|
|
|
|
++m_next;
|
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool operator== (const self_type &other) const
|
|
|
|
{ return m_it == other.m_it; }
|
|
|
|
|
|
|
|
bool operator!= (const self_type &other) const
|
|
|
|
{ return m_it != other.m_it; }
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* The current element. */
|
|
|
|
Iterator m_it {};
|
|
|
|
|
|
|
|
/* The next element. Always one element ahead of M_IT. */
|
|
|
|
Iterator m_next {};
|
|
|
|
|
|
|
|
/* A one-past-end iterator. */
|
|
|
|
Iterator m_end {};
|
|
|
|
};
|
|
|
|
|
2019-11-04 01:38:36 +08:00
|
|
|
/* A range adapter that wraps another range, and then returns safe
|
|
|
|
iterators wrapping the original range's iterators. */
|
|
|
|
|
|
|
|
template<typename Range>
|
|
|
|
class basic_safe_range
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
|
|
|
|
typedef basic_safe_iterator<typename Range::iterator> iterator;
|
|
|
|
|
|
|
|
explicit basic_safe_range (Range range)
|
|
|
|
: m_range (range)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2019-12-13 23:48:44 +08:00
|
|
|
iterator begin ()
|
2019-11-04 01:38:36 +08:00
|
|
|
{
|
|
|
|
return iterator (m_range.begin (), m_range.end ());
|
|
|
|
}
|
|
|
|
|
2019-12-13 23:48:44 +08:00
|
|
|
iterator end ()
|
2019-11-04 01:38:36 +08:00
|
|
|
{
|
|
|
|
return iterator (m_range.end (), m_range.end ());
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
|
|
|
|
Range m_range;
|
|
|
|
};
|
|
|
|
|
2019-01-28 03:51:36 +08:00
|
|
|
#endif /* COMMON_SAFE_ITERATOR_H */
|