Fix problems with bss handling in linker scripts.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
2016-12-12 09:31:25 +08:00
|
|
|
#!/bin/sh
|
|
|
|
|
|
|
|
|
|
# script_test_15b.sh -- test for .bss placement.
|
|
|
|
|
|
2021-01-01 06:58:58 +08:00
|
|
|
# Copyright (C) 2016-2021 Free Software Foundation, Inc.
|
Fix problems with bss handling in linker scripts.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
2016-12-12 09:31:25 +08:00
|
|
|
# Written by Cary Coutant <ccoutant@gmail.com>.
|
|
|
|
|
|
|
|
|
|
# This file is part of gold.
|
|
|
|
|
|
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
# (at your option) any later version.
|
|
|
|
|
|
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
|
# along with this program; if not, write to the Free Software
|
|
|
|
|
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
|
|
|
|
|
# MA 02110-1301, USA.
|
|
|
|
|
|
|
|
|
|
# Check that a .bss section placed in the middle of a segment
|
|
|
|
|
# is allocated in the file image.
|
|
|
|
|
|
|
|
|
|
check()
|
|
|
|
|
{
|
|
|
|
|
if ! grep -q "$2" "$1"
|
|
|
|
|
then
|
|
|
|
|
echo "Did not find expected section in $1:"
|
|
|
|
|
echo " $2"
|
|
|
|
|
echo ""
|
|
|
|
|
echo "Actual output below:"
|
|
|
|
|
cat "$1"
|
|
|
|
|
exit 1
|
|
|
|
|
fi
|
|
|
|
|
}
|
|
|
|
|
|
2017-01-12 03:26:26 +08:00
|
|
|
check script_test_15b.stdout "LOAD.*0x0\+1... 0x0\+1... RW"
|
|
|
|
|
check script_test_15b.stdout "01.*\.bss .*\.data .*\.data.extra"
|
