binutils-gdb/gdb/source-cache.c

353 lines
9.0 KiB
C
Raw Normal View History

2018-10-10 12:21:05 +08:00
/* Cache of styled source file text
Copyright (C) 2018-2020 Free Software Foundation, Inc.
2018-10-10 12:21:05 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "source-cache.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/scoped_fd.h"
2018-10-10 12:21:05 +08:00
#include "source.h"
#include "cli/cli-style.h"
Don't include gdbarch.h from defs.h I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-06-10 05:21:02 +08:00
#include "symtab.h"
#include "gdbsupport/selftest.h"
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
#include "objfiles.h"
#include "exec.h"
2018-10-10 12:21:05 +08:00
#ifdef HAVE_SOURCE_HIGHLIGHT
/* If Gnulib redirects 'open' and 'close' to its replacements
'rpl_open' and 'rpl_close' via cpp macros, including <fstream>
below with those macros in effect will cause unresolved externals
when GDB is linked. Happens, e.g., in the MinGW build. */
#undef open
#undef close
2018-10-10 12:21:05 +08:00
#include <sstream>
#include <srchilite/sourcehighlight.h>
#include <srchilite/langmap.h>
#endif
/* The number of source files we'll cache. */
#define MAX_ENTRIES 5
/* See source-cache.h. */
source_cache g_source_cache;
/* See source-cache.h. */
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
std::string
source_cache::get_plain_source_lines (struct symtab *s,
const std::string &fullname)
2018-10-10 12:21:05 +08:00
{
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
scoped_fd desc (open_source_file (s));
2018-10-10 12:21:05 +08:00
if (desc.get () < 0)
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
perror_with_name (symtab_to_filename_for_display (s));
2018-10-10 12:21:05 +08:00
struct stat st;
if (fstat (desc.get (), &st) < 0)
2018-10-10 12:21:05 +08:00
perror_with_name (symtab_to_filename_for_display (s));
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
std::string lines;
lines.resize (st.st_size);
if (myread (desc.get (), &lines[0], lines.size ()) < 0)
2018-10-10 12:21:05 +08:00
perror_with_name (symtab_to_filename_for_display (s));
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
time_t mtime = 0;
if (SYMTAB_OBJFILE (s) != NULL && SYMTAB_OBJFILE (s)->obfd != NULL)
mtime = SYMTAB_OBJFILE (s)->mtime;
else if (exec_bfd)
mtime = exec_bfd_mtime;
2018-10-10 12:21:05 +08:00
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
if (mtime && mtime < st.st_mtime)
warning (_("Source file is more recent than executable."));
2018-10-10 12:21:05 +08:00
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
std::vector<off_t> offsets;
offsets.push_back (0);
for (size_t offset = lines.find ('\n');
offset != std::string::npos;
offset = lines.find ('\n', offset))
2018-10-10 12:21:05 +08:00
{
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
++offset;
/* A newline at the end does not start a new line. It would
seem simpler to just strip the newline in this function, but
then "list" won't print the final newline. */
if (offset != lines.size ())
offsets.push_back (offset);
2018-10-10 12:21:05 +08:00
}
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
offsets.shrink_to_fit ();
m_offset_cache.emplace (fullname, std::move (offsets));
return lines;
2018-10-10 12:21:05 +08:00
}
#ifdef HAVE_SOURCE_HIGHLIGHT
2018-10-10 12:21:05 +08:00
/* Return the Source Highlight language name, given a gdb language
LANG. Returns NULL if the language is not known. */
static const char *
get_language_name (enum language lang)
{
switch (lang)
{
case language_c:
case language_objc:
return "c.lang";
case language_cplus:
return "cpp.lang";
case language_d:
return "d.lang";
case language_go:
return "go.lang";
case language_fortran:
return "fortran.lang";
case language_m2:
/* Not handled by Source Highlight. */
break;
case language_asm:
return "asm.lang";
case language_pascal:
return "pascal.lang";
case language_opencl:
/* Not handled by Source Highlight. */
break;
case language_rust:
return "rust.lang";
2018-10-10 12:21:05 +08:00
case language_ada:
return "ada.lang";
default:
break;
}
return nullptr;
}
#endif /* HAVE_SOURCE_HIGHLIGHT */
2018-10-10 12:21:05 +08:00
/* See source-cache.h. */
bool
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
source_cache::ensure (struct symtab *s)
2018-10-10 12:21:05 +08:00
{
std::string fullname = symtab_to_fullname (s);
2018-10-10 12:21:05 +08:00
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
size_t size = m_source_map.size ();
for (int i = 0; i < size; ++i)
{
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
if (m_source_map[i].fullname == fullname)
2018-10-10 12:21:05 +08:00
{
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
/* This should always hold, because we create the file
offsets when reading the file, and never free them
without also clearing the contents cache. */
gdb_assert (m_offset_cache.find (fullname)
!= m_offset_cache.end ());
/* Not strictly LRU, but at least ensure that the most
recently used entry is always the last candidate for
deletion. Note that this property is relied upon by at
least one caller. */
if (i != size - 1)
std::swap (m_source_map[i], m_source_map[size - 1]);
return true;
2018-10-10 12:21:05 +08:00
}
}
2018-10-10 12:21:05 +08:00
gdb: Catch exceptions if the source file is not found The source_cache::ensure method may throw an exception through the invocation of source_cache::get_plain_source_lines. This happens when the source file is not found. The expected behaviour of "ensure" is only returning "true" or "false" according to the documentation in the header file. So far, if gdb is in source layout and a file is missing, you see some outputs like below: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) [pressing arrow-down key] | | (gdb) terminate called after throwing an | | instance of 'gdb_exception_error' | `---------------------------------------------' Other issues have been encountered as well [1]. The patch from Pedro [2] which is about preventing exceptions from crossing the "readline" mitigates the situation by not causing gdb crash, but still there are lots of errors printed: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-up key] | | /path/to/crt0.S: No such file or directory. | `---------------------------------------------' With the changes of this patch, the behavior is like: ,---------------------------------------------. | initially, source window is empty because | | crt0.S is not found and according to the | | program counter that is the piece of code | | being executed. | | | | later, when we break at main (see commands | | below), this window will be filled with the | | the contents of test.c file. | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) b main | | Breakpoint 1 at 0x334: file test.c, line 8. | | (gdb) cont | | Continuing. | | Breakpoint 1, main () at hello.c:8 | | (gdb) n | | (gdb) | `---------------------------------------------' There is no crash and the error message is completely gone. Maybe it is good practice that the error is shown inside the source window. I tested this change against gdb.base/list-missing-source.exp and there was no regression. [1] It has also been observed in the past that the register values are not transferred from qemu's gdb stub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226 [2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2 gdb/ChangeLog: * source-cache.c (source_cache::ensure): Surround get_plain_source_lines with a try/catch. (source_cache::get_line_charpos): Get rid of try/catch and only check for the return value of "ensure". * tui/tui-source.c (tui_source_window::set_contents): Simplify "nlines" calculation. gdb/testsuite/ChangeLog: * gdb.tui/tui-missing-src.exp: Add the "missing source file" test for the TUI.
2020-02-06 23:20:37 +08:00
std::string contents;
try
{
contents = get_plain_source_lines (s, fullname);
}
catch (const gdb_exception_error &e)
{
/* If 's' is not found, an exception is thrown. */
return false;
}
if (source_styling && gdb_stdout->can_emit_style_escape ())
{
#ifdef HAVE_SOURCE_HIGHLIGHT
bool already_styled = false;
2018-10-10 12:21:05 +08:00
const char *lang_name = get_language_name (SYMTAB_LANGUAGE (s));
if (lang_name != nullptr)
{
/* The global source highlight object, or null if one was
never constructed. This is stored here rather than in
the class so that we don't need to include anything or do
conditional compilation in source-cache.h. */
static srchilite::SourceHighlight *highlighter;
try
{
if (highlighter == nullptr)
{
highlighter = new srchilite::SourceHighlight ("esc.outlang");
highlighter->setStyleFile ("esc.style");
}
std::istringstream input (contents);
std::ostringstream output;
highlighter->highlight (input, output, lang_name, fullname);
contents = output.str ();
already_styled = true;
}
catch (...)
{
/* Source Highlight will throw an exception if
highlighting fails. One possible reason it can fail
is if the language is unknown -- which matters to gdb
because Rust support wasn't added until after 3.1.8.
Ignore exceptions here and fall back to
un-highlighted text. */
}
2018-10-10 12:21:05 +08:00
}
if (!already_styled)
2018-10-10 12:21:05 +08:00
#endif /* HAVE_SOURCE_HIGHLIGHT */
{
gdb::optional<std::string> ext_contents;
ext_contents = ext_lang_colorize (fullname, contents);
if (ext_contents.has_value ())
contents = std::move (*ext_contents);
}
}
2018-10-10 12:21:05 +08:00
source_text result = { std::move (fullname), std::move (contents) };
m_source_map.push_back (std::move (result));
if (m_source_map.size () > MAX_ENTRIES)
m_source_map.erase (m_source_map.begin ());
return true;
2018-10-10 12:21:05 +08:00
}
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
/* See source-cache.h. */
bool
source_cache::get_line_charpos (struct symtab *s,
const std::vector<off_t> **offsets)
{
gdb: Catch exceptions if the source file is not found The source_cache::ensure method may throw an exception through the invocation of source_cache::get_plain_source_lines. This happens when the source file is not found. The expected behaviour of "ensure" is only returning "true" or "false" according to the documentation in the header file. So far, if gdb is in source layout and a file is missing, you see some outputs like below: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) [pressing arrow-down key] | | (gdb) terminate called after throwing an | | instance of 'gdb_exception_error' | `---------------------------------------------' Other issues have been encountered as well [1]. The patch from Pedro [2] which is about preventing exceptions from crossing the "readline" mitigates the situation by not causing gdb crash, but still there are lots of errors printed: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-up key] | | /path/to/crt0.S: No such file or directory. | `---------------------------------------------' With the changes of this patch, the behavior is like: ,---------------------------------------------. | initially, source window is empty because | | crt0.S is not found and according to the | | program counter that is the piece of code | | being executed. | | | | later, when we break at main (see commands | | below), this window will be filled with the | | the contents of test.c file. | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) b main | | Breakpoint 1 at 0x334: file test.c, line 8. | | (gdb) cont | | Continuing. | | Breakpoint 1, main () at hello.c:8 | | (gdb) n | | (gdb) | `---------------------------------------------' There is no crash and the error message is completely gone. Maybe it is good practice that the error is shown inside the source window. I tested this change against gdb.base/list-missing-source.exp and there was no regression. [1] It has also been observed in the past that the register values are not transferred from qemu's gdb stub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226 [2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2 gdb/ChangeLog: * source-cache.c (source_cache::ensure): Surround get_plain_source_lines with a try/catch. (source_cache::get_line_charpos): Get rid of try/catch and only check for the return value of "ensure". * tui/tui-source.c (tui_source_window::set_contents): Simplify "nlines" calculation. gdb/testsuite/ChangeLog: * gdb.tui/tui-missing-src.exp: Add the "missing source file" test for the TUI.
2020-02-06 23:20:37 +08:00
std::string fullname = symtab_to_fullname (s);
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
gdb: Catch exceptions if the source file is not found The source_cache::ensure method may throw an exception through the invocation of source_cache::get_plain_source_lines. This happens when the source file is not found. The expected behaviour of "ensure" is only returning "true" or "false" according to the documentation in the header file. So far, if gdb is in source layout and a file is missing, you see some outputs like below: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) [pressing arrow-down key] | | (gdb) terminate called after throwing an | | instance of 'gdb_exception_error' | `---------------------------------------------' Other issues have been encountered as well [1]. The patch from Pedro [2] which is about preventing exceptions from crossing the "readline" mitigates the situation by not causing gdb crash, but still there are lots of errors printed: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-up key] | | /path/to/crt0.S: No such file or directory. | `---------------------------------------------' With the changes of this patch, the behavior is like: ,---------------------------------------------. | initially, source window is empty because | | crt0.S is not found and according to the | | program counter that is the piece of code | | being executed. | | | | later, when we break at main (see commands | | below), this window will be filled with the | | the contents of test.c file. | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) b main | | Breakpoint 1 at 0x334: file test.c, line 8. | | (gdb) cont | | Continuing. | | Breakpoint 1, main () at hello.c:8 | | (gdb) n | | (gdb) | `---------------------------------------------' There is no crash and the error message is completely gone. Maybe it is good practice that the error is shown inside the source window. I tested this change against gdb.base/list-missing-source.exp and there was no regression. [1] It has also been observed in the past that the register values are not transferred from qemu's gdb stub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226 [2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2 gdb/ChangeLog: * source-cache.c (source_cache::ensure): Surround get_plain_source_lines with a try/catch. (source_cache::get_line_charpos): Get rid of try/catch and only check for the return value of "ensure". * tui/tui-source.c (tui_source_window::set_contents): Simplify "nlines" calculation. gdb/testsuite/ChangeLog: * gdb.tui/tui-missing-src.exp: Add the "missing source file" test for the TUI.
2020-02-06 23:20:37 +08:00
auto iter = m_offset_cache.find (fullname);
if (iter == m_offset_cache.end ())
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
{
gdb: Catch exceptions if the source file is not found The source_cache::ensure method may throw an exception through the invocation of source_cache::get_plain_source_lines. This happens when the source file is not found. The expected behaviour of "ensure" is only returning "true" or "false" according to the documentation in the header file. So far, if gdb is in source layout and a file is missing, you see some outputs like below: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) [pressing arrow-down key] | | (gdb) terminate called after throwing an | | instance of 'gdb_exception_error' | `---------------------------------------------' Other issues have been encountered as well [1]. The patch from Pedro [2] which is about preventing exceptions from crossing the "readline" mitigates the situation by not causing gdb crash, but still there are lots of errors printed: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-up key] | | /path/to/crt0.S: No such file or directory. | `---------------------------------------------' With the changes of this patch, the behavior is like: ,---------------------------------------------. | initially, source window is empty because | | crt0.S is not found and according to the | | program counter that is the piece of code | | being executed. | | | | later, when we break at main (see commands | | below), this window will be filled with the | | the contents of test.c file. | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) b main | | Breakpoint 1 at 0x334: file test.c, line 8. | | (gdb) cont | | Continuing. | | Breakpoint 1, main () at hello.c:8 | | (gdb) n | | (gdb) | `---------------------------------------------' There is no crash and the error message is completely gone. Maybe it is good practice that the error is shown inside the source window. I tested this change against gdb.base/list-missing-source.exp and there was no regression. [1] It has also been observed in the past that the register values are not transferred from qemu's gdb stub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226 [2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2 gdb/ChangeLog: * source-cache.c (source_cache::ensure): Surround get_plain_source_lines with a try/catch. (source_cache::get_line_charpos): Get rid of try/catch and only check for the return value of "ensure". * tui/tui-source.c (tui_source_window::set_contents): Simplify "nlines" calculation. gdb/testsuite/ChangeLog: * gdb.tui/tui-missing-src.exp: Add the "missing source file" test for the TUI.
2020-02-06 23:20:37 +08:00
if (!ensure (s))
return false;
iter = m_offset_cache.find (fullname);
/* cache_source_text ensured this was entered. */
gdb_assert (iter != m_offset_cache.end ());
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
}
gdb: Catch exceptions if the source file is not found The source_cache::ensure method may throw an exception through the invocation of source_cache::get_plain_source_lines. This happens when the source file is not found. The expected behaviour of "ensure" is only returning "true" or "false" according to the documentation in the header file. So far, if gdb is in source layout and a file is missing, you see some outputs like below: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | /path/to/crt0.S: No such file or directory. | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) [pressing arrow-down key] | | (gdb) terminate called after throwing an | | instance of 'gdb_exception_error' | `---------------------------------------------' Other issues have been encountered as well [1]. The patch from Pedro [2] which is about preventing exceptions from crossing the "readline" mitigates the situation by not causing gdb crash, but still there are lots of errors printed: ,---------------------------------------------. | test.c file is loaded in the source window. | | | | int main() | | ... | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-down key] | | /path/to/crt0.S: No such file or directory. | | (gdb) [pressing arrow-up key] | | /path/to/crt0.S: No such file or directory. | `---------------------------------------------' With the changes of this patch, the behavior is like: ,---------------------------------------------. | initially, source window is empty because | | crt0.S is not found and according to the | | program counter that is the piece of code | | being executed. | | | | later, when we break at main (see commands | | below), this window will be filled with the | | the contents of test.c file. | |---------------------------------------------| | Remote debugging using :1234 | | __start () at /path/to/crt0.S:141 | | (gdb) p/x $pc | | $1 = 0x124 | | (gdb) n | | (gdb) p/x $pc | | $2 = 0x128 | | (gdb) b main | | Breakpoint 1 at 0x334: file test.c, line 8. | | (gdb) cont | | Continuing. | | Breakpoint 1, main () at hello.c:8 | | (gdb) n | | (gdb) | `---------------------------------------------' There is no crash and the error message is completely gone. Maybe it is good practice that the error is shown inside the source window. I tested this change against gdb.base/list-missing-source.exp and there was no regression. [1] It has also been observed in the past that the register values are not transferred from qemu's gdb stub, see: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226 [2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2 gdb/ChangeLog: * source-cache.c (source_cache::ensure): Surround get_plain_source_lines with a try/catch. (source_cache::get_line_charpos): Get rid of try/catch and only check for the return value of "ensure". * tui/tui-source.c (tui_source_window::set_contents): Simplify "nlines" calculation. gdb/testsuite/ChangeLog: * gdb.tui/tui-missing-src.exp: Add the "missing source file" test for the TUI.
2020-02-06 23:20:37 +08:00
*offsets = &iter->second;
return true;
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
}
/* A helper function that extracts the desired source lines from TEXT,
putting them into LINES_OUT. The arguments are as for
get_source_lines. Returns true on success, false if the line
numbers are invalid. */
static bool
extract_lines (const std::string &text, int first_line, int last_line,
std::string *lines_out)
{
int lineno = 1;
std::string::size_type pos = 0;
std::string::size_type first_pos = std::string::npos;
while (pos != std::string::npos && lineno <= last_line)
{
std::string::size_type new_pos = text.find ('\n', pos);
if (lineno == first_line)
first_pos = pos;
pos = new_pos;
if (lineno == last_line || pos == std::string::npos)
{
/* A newline at the end does not start a new line. */
if (first_pos == std::string::npos
|| first_pos == text.size ())
return false;
if (pos == std::string::npos)
pos = text.size ();
else
++pos;
*lines_out = text.substr (first_pos, pos - first_pos);
return true;
}
++lineno;
++pos;
}
return false;
}
/* See source-cache.h. */
bool
source_cache::get_source_lines (struct symtab *s, int first_line,
int last_line, std::string *lines)
{
if (first_line < 1 || last_line < 1 || first_line > last_line)
return false;
if (!ensure (s))
return false;
return extract_lines (m_source_map.back ().contents,
first_line, last_line, lines);
}
#if GDB_SELF_TEST
namespace selftests
{
static void extract_lines_test ()
{
std::string input_text = "abc\ndef\nghi\njkl\n";
Add file offsets to the source cache Currently, gdb stores the number of lines and an array of file offsets for the start of each line in struct symtab. This patch moves this information to the source cache. This has two benefits. First, it allows gdb to read a source file less frequently. Currently, a source file may be read multiple times: once when computing the file offsets, once when highlighting, and then pieces may be read again while printing source lines. With this change, the file is read once for its source text and file offsets; and then perhaps read again if it is evicted from the cache. Second, if multiple symtabs cover the same source file, then this will share the file offsets between them. I'm not sure whether this happens in practice. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * annotate.c (annotate_source_line): Use g_source_cache. * source-cache.c (source_cache::get_plain_source_lines): Change parameters. Populate m_offset_cache. (source_cache::ensure): New method. (source_cache::get_line_charpos): New method. (extract_lines): Move lower. Change parameters. (source_cache::get_source_lines): Move lower. * source-cache.h (class source_cache): Update comment. <get_line_charpos>: New method. <get_source_lines>: Update comment. <clear>: Clear m_offset_cache. <get_plain_source_lines>: Change parameters. <ensure>: New method <m_offset_cache>: New member. * source.c (forget_cached_source_info_for_objfile): Update. (info_source_command): Use g_source_cache. (find_source_lines, open_source_file_with_line_charpos): Remove. (print_source_lines_base, search_command_helper): Use g_source_cache. * source.h (open_source_file_with_line_charpos): Don't declare. * symtab.h (struct symtab) <nlines, line_charpos>: Remove. * tui/tui-source.c (tui_source_window::do_scroll_vertical): Use g_source_cache.
2019-07-23 04:31:43 +08:00
std::string result;
SELF_CHECK (extract_lines (input_text, 1, 1, &result)
&& result == "abc\n");
SELF_CHECK (!extract_lines (input_text, 2, 1, &result));
SELF_CHECK (extract_lines (input_text, 1, 2, &result)
&& result == "abc\ndef\n");
SELF_CHECK (extract_lines ("abc", 1, 1, &result)
&& result == "abc");
}
}
#endif
gdb: add back declarations for _initialize functions I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9 Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
2020-01-14 03:01:38 +08:00
void _initialize_source_cache ();
void
_initialize_source_cache ()
{
#if GDB_SELF_TEST
selftests::register_test ("source-cache", selftests::extract_lines_test);
#endif
}