binutils-gdb/sim/bpf/ChangeLog

159 lines
3.8 KiB
Plaintext
Raw Normal View History

2021-05-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (struct sim_state): Delete.
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* bpf-helpers.c, bpf.c, sim-if.c, traps.c: Include defs.h.
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-05-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-05-01 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-04-26 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
Do not check for sys/time.h or sys/times.h This updates the sim so that it unconditionally uses sys/time.h. This is in agreement with existing code, and a recent change to BFD. I also think that sys/times.h is never needed by the sim, so this patch removes the check and the one spot that was conditionally including it. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h or sys/times.h. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-utils.c: Update includes. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * simops.c: Update includes. * configure, config.in: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rvdummy.c: Update includes. * dv-rv.c: Update includes. * configure, config.in: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * mon.c: Update includes. * emul_unix.c: Update includes. (do_unix_gettimeofday): Update condition. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * interp.c: Update includes. * configure, config.in: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild.
2021-04-23 09:51:54 +08:00
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
Remove and modernize dependencies in sim Some spots in the sim build used manual dependencies, and some spots did a compilation by hand but did not use the automatic dependency tracking code. This patch fixes these spots. I didn't touch ppc, because it doesn't use the common Makefile code. I also didn't touch objects that are for the build machine, because automatic dependencies don't work for those. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and POSTCOMPILE. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove. (mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o) (sim-be.o): Use COMPILE and POSTCOMPILE. (SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o) (devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o) (modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o) (modelv32.o): Remove. (SIM_EXTRA_DEPS): Add engv10.h. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o) (interrupts.o, memory.o, cache.o, options.o, reset.o) (registers.o, profile.o, profile-fr400.o, profile-fr450.o) (profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o) (decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o): Remove. (arch.o): Use COMPILE and POSTCOMPILE. (devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o) (cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o) (devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o) (m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o) (m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove. (SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o): Remove. (SIM_EXTRA_DEPS): New variable. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. (idecode.o op_utils.o semantics.o): Remove. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o) (sem-switch.o, model.o): Remove. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (reg.o, rl78.o): Remove. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (interp.o): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, simops.o, semantics.o): Remove.
2021-04-23 09:51:54 +08:00
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove.
(mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o)
(sim-be.o): Use COMPILE and POSTCOMPILE.
(SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h.
2021-04-21 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: Regenerate.
2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
* configure: Regenerate.
2021-04-18 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-04-12 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
Do not use old-style definitions in sim This changes all the non-generated (hand-written) code in sim to use "new" (post-K&R) style function definitions. 2021-04-08 Tom Tromey <tom@tromey.com> * bpf.c (bpf_def_model_init): Use new-style declaration. sim/common/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * cgen-utils.c (RORQI, ROLQI, RORHI, ROLHI, RORSI, ROLSI): Use new-style declaration. sim/erc32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sis.c (run_sim, main): Use new-style declaration. * interf.c (run_sim, sim_open, sim_close, sim_load) (sim_create_inferior, sim_store_register, sim_fetch_register) (sim_info, sim_stop_reason, flush_windows, sim_do_command): Use new-style declaration. * help.c (usage, gen_help): Use new-style declaration. * func.c (batch, set_regi, set_rega, disp_reg, limcalc) (reset_stat, show_stat, init_bpt, int_handler, init_signals) (disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event) (init_event, set_int, advance_time, now, wait_for_irq, check_bpt) (reset_all, sys_reset, sys_halt): Use new-style declaration. * float.c (get_accex, clear_accex, set_fsr): Use new-style declaration. * exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec) (chk_asi, execute_trap, check_interrupts, init_regs): Use new-style declaration. * erc32.c (init_sim, reset, decode_ersr, mecparerror) (error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt) (close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq) (set_sfsr, mec_read, mec_write, init_stdio, restore_stdio) (port_init, read_uart, write_uart, flush_uart, uarta_tx) (uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr) (wdog_start, rtc_intr, rtc_start, rtc_counter_read) (rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start) (gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl) (memory_read, memory_write, get_mem_ptr, sis_memory_write) (sis_memory_read): Use new-style declaration. sim/frv/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, frv_sim_close, sim_create_inferior): Use new-style declaration. sim/h8300/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * compile.c (cmdline_location): Use new-style declaration. sim/iq2000/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. * iq2000.c (fetch_str): Use new-style declaration. sim/lm32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. sim/m32r/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration.
2021-04-08 20:41:25 +08:00
2021-04-08 Tom Tromey <tom@tromey.com>
* bpf.c (bpf_def_model_init): Use new-style declaration.
2021-04-02 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
2021-02-28 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-02-21 Mike Frysinger <vapier@gentoo.org>
* configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
* aclocal.m4, configure: Regenerate.
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
* aclocal.m4, configure: Regenerate.
2021-02-06 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-01-31 Mike Frysinger <vapier@gentoo.org>
* mloop.in (xextract-scache): Call SEM_ARGBUF.
2021-01-31 Mike Frysinger <vapier@gentoo.org>
* decode-be.c (bpfbf_ebpfbe_decode): Change TRACE_EXTRACT to
CGEN_TRACE_EXTRACT.
* decode-le.c (bpfbf_ebpfle_decode): Likewise.
2021-01-11 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Call SIM_AC_OPTION_WARNINGS.
* configure: Regenerate.
2021-01-11 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-01-09 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-01-08 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2020-11-01 Simon Marchi <simon.marchi@polymtl.ca>
* configure: Re-generate.
2020-09-08 David Faust <david.faust@oracle.com>
* sem-be.c: Regenerate.
* sem-le.c: Likewise.
2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.c: Include bpf-helpers.h.
* bpf-helpers.h: Provide a prototype for bpf_trace_printk.
* configure.ac: Set simulator bitsize to 64.
* configure (includedir): Regenerate.
* sim-if.c: Include stdlib.h.
* traps.c: Likewise.
2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* arch.c: Likewise.
* arch.h: Likewise.
* cpu.c: Likewise.
* cpu.h: Likewise.
* cpuall.h: Likewise.
* decode-be.c: Likewise.
* decode-be.h: Likewise.
* decode-le.c: Likewise.
* decode-le.h: Likewise.
* defs-be.h: Likewise.
* defs-le.h: Likewise.
* sem-be.c: Likewise.
* sem-le.c: Likewise.
2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* Makefile.in: New file.
* bpf-helpers.c: Likewise.
* bpf-helpers.def: Likewise.
* bpf-helpers.h: Likewise.
* bpf-sim.h: Likewise.
* bpf.c: Likewise.
* config.in: Likewise.
* configure.ac: Likewise.
* decode.h: Likewise.
* eng.h: Likewise.
* mloop.in: Likewise.
* sim-if.c: Likewise.
* sim-main.h: Likewise.
* traps.c: Likewise.
* configure: Generate.
* aclocal.m4: Likewise.