bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
#source: tlsdesc.s
|
|
|
|
|
#source: tlspic2.s
|
|
|
|
|
#as: --64
|
|
|
|
|
#ld: -shared -melf_x86_64_nacl --no-ld-generated-unwind-info
|
|
|
|
|
#objdump: -drj.plt
|
|
|
|
|
#target: x86_64-*-nacl*
|
|
|
|
|
|
|
|
|
|
.*: +file format elf64-x86-64-nacl
|
|
|
|
|
|
|
|
|
|
Disassembly of section .plt:
|
|
|
|
|
|
2014-07-16 23:16:24 +08:00
|
|
|
[0-9a-f]+ <.plt>:
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: ff 35 .. .. .. .. pushq 0x[0-9a-f]+\(%rip\) +# [0-9a-f]+ <_GLOBAL_OFFSET_TABLE_\+0x8>
|
|
|
|
|
+[0-9a-f]+: 4c 8b 1d .. .. .. .. mov 0x[0-9a-f]+\(%rip\),%r11 +# [0-9a-f]+ <_GLOBAL_OFFSET_TABLE_\+0x10>
|
|
|
|
|
+[0-9a-f]+: 41 83 e3 e0 and \$0xffffffe0,%r11d
|
|
|
|
|
+[0-9a-f]+: 4d 01 fb add %r15,%r11
|
|
|
|
|
+[0-9a-f]+: 41 ff e3 jmpq \*%r11
|
2013-11-02 05:54:40 +08:00
|
|
|
+[0-9a-f]+: 66 0f 1f 84 00 00 00 nopw 0x0\(%rax,%rax,1\)
|
2012-04-25 01:24:20 +08:00
|
|
|
+[0-9a-f]+: 00 00 *
|
2014-05-10 01:58:00 +08:00
|
|
|
+[0-9a-f]+: 66 66 66 66 66 66 2e data16 data16 data16 data16 data16 nopw %cs:0x0\(%rax,%rax,1\)
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: 0f 1f 84 00 00 00 00 *
|
|
|
|
|
+[0-9a-f]+: 00 *
|
2014-05-10 01:58:00 +08:00
|
|
|
+[0-9a-f]+: 66 66 66 66 66 66 2e data16 data16 data16 data16 data16 nopw %cs:0x0\(%rax,%rax,1\)
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: 0f 1f 84 00 00 00 00 *
|
|
|
|
|
+[0-9a-f]+: 00 *
|
2012-04-25 01:24:20 +08:00
|
|
|
+[0-9a-f]+: 66 90 xchg %ax,%ax
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: ff 35 .. .. .. .. pushq 0x[0-9a-f]+\(%rip\) +# [0-9a-f]+ <_GLOBAL_OFFSET_TABLE_\+0x8>
|
Enhance objdump so that it will use .got, .plt and .plt.got section symbols when disassembling, and it will use dynamic relocs to interpret entries in the PLT and GOT.
binutils * objdump.c (is_significant_symbol_name): New function.
(remove_useless_symbols): Do not remove significanr symbols.
(find_symbol_for_address): If an exact match for the specified
address has not been found, try scanning the dynamic relocs to see
if one of these matches the address. If so, use the symbol
associated with the reloc.
(objdump_print_addr_with_symbol): Do not print offsets to symbols
with no value.
(disassemble_section): Only use dynamic relocs if the user
requested this.
(disassemble_data): Always load dynamic relocs if they are
available.
ld * ld-aarch64/emit-relocs-515-be.d: Adjust output to match change
in objdump.
* ld-aarch64/emit-relocs-515.d: Likewise.
* ld-aarch64/emit-relocs-516-be.d: Likewise.
* ld-aarch64/emit-relocs-516.d: Likewise.
* ld-aarch64/farcall-b-plt.d: Likewise.
* ld-aarch64/farcall-bl-plt.d: Likewise.
* ld-aarch64/gc-plt-relocs.d: Likewise.
* ld-aarch64/tls-desc-ie.d: Likewise.
* ld-aarch64/tls-tiny-desc.d: Likewise.
* ld-aarch64/tls-tiny-gd.d: Likewise.
* ld-aarch64/tls-tiny-ie.d: Likewise.
* ld-arm/arm-app-abs32.d: Likewise.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-fix-b-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bcc-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Likewise.
* ld-arm/cortex-a8-fix-blx-plt.d: Likewise.
* ld-arm/farcall-mixed-app-v5.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-app2.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/ifunc-10.dd: Likewise.
* ld-arm/ifunc-14.dd: Likewise.
* ld-arm/ifunc-15.dd: Likewise.
* ld-arm/ifunc-3.dd: Likewise.
* ld-arm/ifunc-4.dd: Likewise.
* ld-arm/ifunc-9.dd: Likewise.
* ld-arm/long-plt-format.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-cris/dso-pltdis1.d: Likewise.
* ld-cris/dso-pltdis2.d: Likewise.
* ld-cris/dso12-pltdis.d: Likewise.
* ld-elf/symbolic-func.r: Likewise.
* ld-frv/fdpic-pie-1.d: Likewise.
* ld-frv/fdpic-pie-2.d: Likewise.
* ld-frv/fdpic-pie-6.d: Likewise.
* ld-frv/fdpic-pie-7.d: Likewise.
* ld-frv/fdpic-pie-8.d: Likewise.
* ld-frv/fdpic-shared-1.d: Likewise.
* ld-frv/fdpic-shared-2.d: Likewise.
* ld-frv/fdpic-shared-3.d: Likewise.
* ld-frv/fdpic-shared-4.d: Likewise.
* ld-frv/fdpic-shared-5.d: Likewise.
* ld-frv/fdpic-shared-6.d: Likewise.
* ld-frv/fdpic-shared-7.d: Likewise.
* ld-frv/fdpic-shared-8.d: Likewise.
* ld-frv/fdpic-shared-local-2.d: Likewise.
* ld-frv/fdpic-shared-local-8.d: Likewise.
* ld-frv/fdpic-static-1.d: Likewise.
* ld-frv/fdpic-static-2.d: Likewise.
* ld-frv/fdpic-static-6.d: Likewise.
* ld-frv/fdpic-static-7.d: Likewise.
* ld-frv/fdpic-static-8.d: Likewise.
* ld-frv/tls-dynamic-2.d: Likewise.
* ld-frv/tls-initial-shared-2.d: Likewise.
* ld-frv/tls-relax-shared-2.d: Likewise.
* ld-frv/tls-shared-2.d: Likewise.
* ld-i386/plt-nacl.pd: Likewise.
* ld-i386/plt-pic-nacl.pd: Likewise.
* ld-i386/plt-pic.pd: Likewise.
* ld-i386/plt.pd: Likewise.
* ld-i386/pr19636-1d-nacl.d: Likewise.
* ld-i386/pr19636-1d.d: Likewise.
* ld-i386/pr19636-2c-nacl.d: Likewise.
* ld-i386/pr19636-2c.d: Likewise.
* ld-ifunc/ifunc-21-x86-64.d: Likewise.
* ld-ifunc/ifunc-22-x86-64.d: Likewise.
* ld-ifunc/pr17154-i386.d: Likewise.
* ld-ifunc/pr17154-x86-64.d: Likewise.
* ld-m68k/plt1-68020.d: Likewise.
* ld-m68k/plt1-cpu32.d: Likewise.
* ld-m68k/plt1-isab.d: Likewise.
* ld-m68k/plt1-isac.d: Likewise.
* ld-metag/shared.d: Likewise.
* ld-metag/stub_pic_app.d: Likewise.
* ld-metag/stub_pic_shared.d: Likewise.
* ld-metag/stub_shared.d: Likewise.
* ld-s390/tlsbin_64.dd: Likewise.
* ld-s390/tlspic_64.dd: Likewise.
* ld-tic6x/shlib-1.dd: Likewise.
* ld-tic6x/shlib-1b.dd: Likewise.
* ld-tic6x/shlib-1rb.dd: Likewise.
* ld-tic6x/shlib-app-1.dd: Likewise.
* ld-tic6x/shlib-app-1b.dd: Likewise.
* ld-tic6x/shlib-app-1r.dd: Likewise.
* ld-tic6x/shlib-app-1rb.dd: Likewise.
* ld-tic6x/shlib-noindex.dd: Likewise.
* ld-vax-elf/export-class-data.dd: Likewise.
* ld-vax-elf/plt-local-lib.dd: Likewise.
* ld-vax-elf/plt-local.dd: Likewise.
* ld-x86-64/bnd-ifunc-2.d: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
* ld-x86-64/gotpcrel1.dd: Likewise.
* ld-x86-64/libno-plt-1b.dd: Likewise.
* ld-x86-64/load1c-nacl.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d-nacl.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/mpx3.dd: Likewise.
* ld-x86-64/mpx4.dd: Likewise.
* ld-x86-64/no-plt-1a.dd: Likewise.
* ld-x86-64/no-plt-1b.dd: Likewise.
* ld-x86-64/no-plt-1c.dd: Likewise.
* ld-x86-64/no-plt-1e.dd: Likewise.
* ld-x86-64/no-plt-1f.dd: Likewise.
* ld-x86-64/no-plt-1g.dd: Likewise.
* ld-x86-64/plt-main-bnd.dd: Likewise.
* ld-x86-64/plt-nacl.pd: Likewise.
* ld-x86-64/plt.pd: Likewise.
* ld-x86-64/pr18591.d: Likewise.
* ld-x86-64/pr19609-1c.d: Likewise.
* ld-x86-64/pr19609-1e.d: Likewise.
* ld-x86-64/pr19609-1j.d: Likewise.
* ld-x86-64/pr19609-1l.d: Likewise.
* ld-x86-64/pr19609-1m.d: Likewise.
* ld-x86-64/pr19609-5b.d: Likewise.
* ld-x86-64/pr19609-5c.d: Likewise.
* ld-x86-64/pr19609-5e.d: Likewise.
* ld-x86-64/pr19609-6b.d: Likewise.
* ld-x86-64/pr19609-7b.d: Likewise.
* ld-x86-64/pr19609-7d.d: Likewise.
* ld-x86-64/pr19636-2d.d: Likewise.
* ld-x86-64/pr20093-1.d: Likewise.
* ld-x86-64/pr20093-2.d: Likewise.
* ld-x86-64/pr20253-1b.d: Likewise.
* ld-x86-64/pr20253-1d.d: Likewise.
* ld-x86-64/pr20253-1f.d: Likewise.
* ld-x86-64/pr20253-1h.d: Likewise.
* ld-x86-64/pr20253-1j.d: Likewise.
* ld-x86-64/pr20253-1l.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin2.dd: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsdesc-nacl.pd: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.pd: Likewise.
* ld-x86-64/tlsgd10.dd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgd8.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic2.dd: Likewise.
2016-10-11 Nick Clifton <nickc@redhat.com>
PR ld/20535
* emultempl/elf32.em (_search_needed): Add support for pseudo
environment variables supported by ld.so. Namely $ORIGIN, $LIB
and $PLATFORM.
* configure.ac: Add getauxval to list AC_CHECK_FUNCS list.
* config.in: Regenerate.
* configure: Regenerate.
2016-10-11 Alan Modra <amodra@gmail.com>
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Move binary start to 16M.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-10-07 Alan Modra <amodra@gmail.com>
* ldexp.c (MAX): Define.
(exp_unop, exp_binop, exp_trinop): Alloc at least enough for
etree_type.value.
2016-10-07 Alan Modra <amodra@gmail.com>
* testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from..
* testsuite/ld-elf/elf.exp: ..here.
2016-10-06 Ludovic Court?s <ludo@gnu.org>
* emulparams/elf32bmipn32-defs.sh: Shift quote of
"x$EMULATION_NAME" to the left to work around
<http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>.
2016-10-06 Alan Modra <amodra@gmail.com>
* lexsup.c: Spell fall through comments consistently and add
missing fall through comments.
2016-10-06 Alan Modra <amodra@gmail.com>
* plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning
by adding return.
2016-10-04 Alan Modra <amodra@gmail.com>
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
2016-10-04 Alan Modra <amodra@gmail.com>
* ldexp.c (exp_value_fold): New function.
(exp_unop, exp_binop, exp_trinop): Use it.
2016-09-30 Alan Modra <amodra@gmail.com>
* scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when
not relocating.
* scripttempl/v850_rh850.sc: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
PR ld/20528
* testsuite/ld-elf/pr20528a.d: xfail generic elf targets. Allow
multiple .text sections for hppa-linux.
* testsuite/ld-elf/pr20528b.d: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldmain.c (default_bfd_error_handler): New function pointer.
(ld_bfd_error_handler): New function.
(main): Arrange to call it on bfd errors/warnings.
(ld_bfd_assert_handler): Enable tail call.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldlang.c (ignore_bfd_errors): Update params.
2016-09-29 H.J. Lu <hongjiu.lu@intel.com>
PR ld/20528
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't
merge 2 sections with different SHF_EXCLUDE.
* testsuite/ld-elf/pr20528a.d: New file.
* testsuite/ld-elf/pr20528a.s: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr20528b.s: Likewise.
2016-09-28 Christophe Lyon <christophe.lyon@linaro.org>
PR ld/20608
* testsuite/ld-arm/arm-elf.exp: Handle new testcase.
* testsuite/ld-arm/farcall-mixed-app2.d: New file.
* testsuite/ld-arm/farcall-mixed-app2.r: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.s: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
2016-09-26 Vlad Zakharov <vzakhar@synopsys.com>
* Makefile.in: Regenerate.
* configure: Likewise.
2016-09-26 Alan Modra <amodra@gmail.com>
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
2016-09-23 Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
PR ld/20595
* testsuite/ld-arm/unwind-4.d: Add -q option to linker command
line and -r option to objdump command line. Match emitted relocs
to make sure that superflous relocs are not generated.
2016-09-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-09-22 Nick Clifton <nickc@redhat.com>
* emultempl/elf32.em (_try_needed): In verbose mode, report failed
attempts to find a needed library.
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
* testsuite/ld-aarch64/emit-relocs-28.d: Expect spaces after ","
in addresses.
* testsuite/ld-aarch64/emit-relocs-301-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-301.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-313.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-531.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-532.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-533.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-534.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-535.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-536.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-537.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-538.d: Likewise.
* testsuite/ld-aarch64/erratum835769.d: Likewise.
* testsuite/ld-aarch64/erratum843419.d: Likewise.
* testsuite/ld-aarch64/farcall-b-plt.d: Likewise.
* testsuite/ld-aarch64/farcall-bl-plt.d: Likewise.
* testsuite/ld-aarch64/gc-plt-relocs.d: Likewise.
* testsuite/ld-aarch64/ifunc-21.d: Likewise.
* testsuite/ld-aarch64/ifunc-7c.d: Likewise.
* testsuite/ld-aarch64/tls-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-all.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gd-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie-2.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-desc.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-gd.d: Likewise.
gas * gas/arm/tls.d: Adjust output to match change in objdump.
2016-10-11 20:50:10 +08:00
|
|
|
+[0-9a-f]+: 4c 8b 1d .. .. .. .. mov 0x[0-9a-f]+\(%rip\),%r11 +# [0-9a-f]+ <.*>
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: 41 83 e3 e0 and \$0xffffffe0,%r11d
|
|
|
|
|
+[0-9a-f]+: 4d 01 fb add %r15,%r11
|
|
|
|
|
+[0-9a-f]+: 41 ff e3 jmpq \*%r11
|
2013-11-02 05:54:40 +08:00
|
|
|
+[0-9a-f]+: 66 0f 1f 84 00 00 00 nopw 0x0\(%rax,%rax,1\)
|
2012-04-25 01:24:20 +08:00
|
|
|
+[0-9a-f]+: 00 00 *
|
2014-05-10 01:58:00 +08:00
|
|
|
+[0-9a-f]+: 66 66 66 66 66 66 2e data16 data16 data16 data16 data16 nopw %cs:0x0\(%rax,%rax,1\)
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: 0f 1f 84 00 00 00 00 *
|
|
|
|
|
+[0-9a-f]+: 00 *
|
2014-05-10 01:58:00 +08:00
|
|
|
+[0-9a-f]+: 66 66 66 66 66 66 2e data16 data16 data16 data16 data16 nopw %cs:0x0\(%rax,%rax,1\)
|
bfd/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* elf-nacl.c: New file.
* elf-nacl.h: New file.
* elf32-i386.c (elf_backend_modify_segment_map): Define for
bfd_elf32_i386_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
(elf_backend_modify_program_headers): Likewise.
* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
* Makefile.in: Regenerated.
* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
(bfd_elf32_x86_64_nacl_vec): Likewise.
(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
(bfd_elf32_i386_nacl_vec): Likewise.
(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
* configure: Regenerated.
binutils/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
be ELF too.
* binutils-all/elfedit-4.d: Add "#as: --64" option.
* binutils-all/i386/i386.exp: Accept nacl targets too.
* binutils-all/x86-64/x86-64.exp: Likewise.
gas/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
* gas/i386/l1om.d: Likewise.
ld/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
* emulparams/elf_nacl.sh: New file.
* emulparams/elf_i386_nacl.sh: New file.
* emulparams/elf32_x86_64_nacl.sh: New file.
* emulparams/elf_x86_64_nacl.sh: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
eelf_x86_64_nacl.c here.
(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
New targets.
* Makefile.in: Regenerated.
* scripttempl/elf.sc: Handle SEPARATE_CODE cases.
ld/testsuite/
2012-04-03 Roland McGrath <mcgrathr@google.com>
* ld-x86-64/ilp32-4-nacl.d: New file.
* ld-x86-64/x86-64.exp: Run it.
* ld-discard/discard.exp: Accept nacl targets too.
* ld-elf/binutils.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/tls_common.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-elfweak/elfweak.exp: Likewise.
* ld-gc/gc.exp: Likewise.
* ld-ifunc/binutils.exp: Likewise.
* ld-ifunc/ifunc.exp: Likewise.
* ld-linkonce/linkonce.exp:Likewise.
* ld-pie/pie.exp: Likewise.
* ld-shared/shared.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-unique/unique.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/line.exp: Likewise.
* lib/ld-lib.exp (slurp_options): Support global array
options_regsub to apply substitutions to the contents
of options lines read from the file.
* ld-i386/emit-relocs.d: Renamed to ...
* ld-i386/emit-relocs.rd: ... this.
* ld-i386/i386.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_i386 with
elf_i386_nacl in run_dump_test cases; apply the same
substitution in $i386tests; replace foo.rd expectations
files with foo-nacl.rd in $i386tests.
(i386tests): Change emit-relocs.d to emit-relocs.rd here.
* ld-i386/emit-relocs-nacl.rd: New file.
* ld-i386/plt-nacl.pd: New file.
* ld-i386/plt-pic-nacl.pd: New file.
* ld-i386/tlsbin-nacl.rd: New file.
* ld-i386/tlsbindesc-nacl.rd: New file.
* ld-i386/tlsdesc-nacl.rd: New file.
* ld-i386/tlsgdesc-nacl.rd: New file.
* ld-i386/tlsnopic-nacl.rd: New file.
* ld-i386/tlspic-nacl.rd: New file.
* ld-x86-64/x86-64.exp: Accept nacl targets too.
For them, use options_regsub to replace elf_x86_64 with
elf_x86_64_nacl in run_dump_test cases; apply the same
substitution in $x86_64tests; replace foo.rd expectations
files with foo-nacl.rd in $x86_64tests.
Add explicit -melf_x86_64 to ld options in tests that need it,
in case the default emulation is x32 (as it is for x86_64-nacl).
* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.
* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
and not to depend on exact addresses, displacements, etc. where
they are irrelevant.
* ld-i386/pcrel16.d: Likewise.
* ld-i386/pcrel16abs.d: Likewise.
* ld-i386/pr12718.d: Likewise.
* ld-i386/pr12921.d: Likewise.
* ld-i386/reloc.d: Likewise.
* ld-i386/tlsbin.dd: Likewise.
* ld-i386/tlsbin.sd: Likewise.
* ld-i386/tlsbin.td: Likewise.
* ld-i386/tlsbindesc.dd: Likewise.
* ld-i386/tlsbindesc.sd: Likewise.
* ld-i386/tlsbindesc.td: Likewise.
* ld-i386/tlsdesc.dd: Likewise.
* ld-i386/tlsdesc.sd: Likewise.
* ld-i386/tlsdesc.td: Likewise.
* ld-i386/tlsg.sd: Likewise.
* ld-i386/tlsgdesc.dd: Likewise.
* ld-i386/tlsindntpoff.dd: Likewise.
* ld-i386/tlsnopic.dd: Likewise.
* ld-i386/tlsnopic.sd: Likewise.
* ld-i386/tlspic.dd: Likewise.
* ld-i386/tlspic.sd: Likewise.
* ld-i386/tlspic.td: Likewise.
* ld-i386/tlspie2.d: Likewise.
* ld-x86-64/hidden2.d: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
* ld-x86-64/pr12718.d: Likewise.
* ld-x86-64/pr12921.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.sd: Likewise.
* ld-x86-64/tlsdesc.td: Likewise.
* ld-x86-64/tlsg.sd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic.sd: Likewise.
* ld-x86-64/tlspic.td: Likewise.
* ld-x86-64/ilp32-8.d: Match any file format variant.
Use a -Ttext and adjust expected results, to handle variant layouts.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
* ld-i386/pr12627.t: Likewise.
* ld-x86-64/abs-l1om.d: Add target: constraint.
* ld-x86-64/protected2-l1om.d: Likewise.
* ld-x86-64/protected3-l1om.d: Likewise.
* ld-x86-64/ilp32-4.d: Likewise.
* ld-x86-64/plt.s: New file.
* ld-x86-64/pltlib.s: New file.
* ld-x86-64/plt.pd: New file.
* ld-x86-64/x86-64.exp (x86_64tests): Add them.
* ld-i386/plt.s: New file.
* ld-i386/pltlib.s: New file.
* ld-i386/plt.pd: New file.
* ld-i386/plt-pic.s: New file.
* ld-i386/plt-pic.pd: New file.
* ld-i386/i386.exp (i386tests): Add them.
2012-04-04 00:01:38 +08:00
|
|
|
+[0-9a-f]+: 0f 1f 84 00 00 00 00 *
|
|
|
|
|
+[0-9a-f]+: 00 *
|
2012-04-25 01:24:20 +08:00
|
|
|
+[0-9a-f]+: 66 90 xchg %ax,%ax
|
