binutils-gdb/ld/scripttempl/elfxtensa.sc

479 lines
19 KiB
Python
Raw Normal View History

2003-04-01 23:50:31 +08:00
#
# Unusual variables checked by this code:
# NOP - four byte opcode for no-op (defaults to 0)
# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
# empty.
# SMALL_DATA_CTOR - .ctors contains small data.
# SMALL_DATA_DTOR - .dtors contains small data.
2003-04-01 23:50:31 +08:00
# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
# INITIAL_READONLY_SECTIONS - at start of text segment
# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
# (e.g., .PARISC.milli)
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
# (e.g. PPC32 .fixup, .got[12])
2003-04-01 23:50:31 +08:00
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
# TEXT_START_ADDR - the first byte of the text segment, after any
# headers.
# TEXT_BASE_ADDRESS - the first byte of the text segment.
2003-04-01 23:50:31 +08:00
# TEXT_START_SYMBOLS - symbols that appear at the start of the
# .text section.
# DATA_START_SYMBOLS - symbols that appear at the start of the
# .data section.
# DATA_END_SYMBOLS - symbols that appear at the end of the
# writeable data sections.
2003-04-01 23:50:31 +08:00
# OTHER_GOT_SYMBOLS - symbols defined just before .got.
# OTHER_GOT_SECTIONS - sections just after .got.
# OTHER_SDATA_SECTIONS - sections just after .sdata.
# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
# .bss section besides __bss_start.
# DATA_PLT - .plt should be in data segment, not text segment.
# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
# BSS_PLT - .plt should be in bss segment
2003-04-01 23:50:31 +08:00
# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
# EMBEDDED - whether this is for an embedded system.
# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
# start address of shared library.
# INPUT_FILES - INPUT command of files to always include
# WRITABLE_RODATA - if set, the .rodata section should be writable
# INIT_START, INIT_END - statements just before and just after
# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
# combination of .fini sections.
# STACK_ADDR - start of a .stack section.
# OTHER_SYMBOLS - symbols to place right at the end of the script.
# ETEXT_NAME - name of a symbol for the end of the text section,
# normally etext.
# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
# so that .got can be in the RELRO area. It should be set to
# the number of bytes in the beginning of .got.plt which can be
# in the RELRO area as well.
2003-04-01 23:50:31 +08:00
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#
# Many sections come in three flavours. There is the 'real' section,
# like ".data". Then there are the per-procedure or per-variable
# sections, generated by -ffunction-sections and -fdata-sections in GCC,
# and useful for --gc-sections, which for a variable "foo" might be
# ".data.foo". Then there are the linkonce sections, for which the linker
# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
# The exact correspondences are:
#
# Section Linkonce section
# .text .gnu.linkonce.t.foo
# .rodata .gnu.linkonce.r.foo
# .data .gnu.linkonce.d.foo
# .bss .gnu.linkonce.b.foo
# .sdata .gnu.linkonce.s.foo
# .sbss .gnu.linkonce.sb.foo
# .sdata2 .gnu.linkonce.s2.foo
# .sbss2 .gnu.linkonce.sb2.foo
# .debug_info .gnu.linkonce.wi.foo
# .tdata .gnu.linkonce.td.foo
# .tbss .gnu.linkonce.tb.foo
#
# Each of these can also have corresponding .rel.* and .rela.* sections.
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
2003-04-01 23:50:31 +08:00
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
2003-04-01 23:50:31 +08:00
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
DATA_SEGMENT_RELRO_END=""
2003-04-01 23:50:31 +08:00
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
2003-04-01 23:50:31 +08:00
fi
INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
if test -z "$PLT"; then
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
fi
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
else
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
GOT=".got ${RELOCATING-0} : { *(.got) }"
GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }"
fi
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
fi
2003-04-01 23:50:31 +08:00
DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
2003-04-01 23:50:31 +08:00
INIT_LIT=".init.literal 0 : { *(.init.literal) }"
INIT=".init 0 : { *(.init) }"
FINI_LIT=".fini.literal 0 : { *(.fini.literal) }"
FINI=".fini 0 : { *(.fini) }"
if test -z "${NO_SMALL_DATA}"; then
SBSS=".sbss ${RELOCATING-0} :
{
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
2003-04-01 23:50:31 +08:00
*(.dynsbss)
*(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
*(.scommon)
}"
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
2003-04-01 23:50:31 +08:00
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
.rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
.rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
.rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
.rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
else
NO_SMALL_DATA=" "
2003-04-01 23:50:31 +08:00
fi
if test -z "${DATA_GOT}"; then
if test -n "${NO_SMALL_DATA}"; then
DATA_GOT=" "
fi
fi
if test -z "${SDATA_GOT}"; then
if test -z "${NO_SMALL_DATA}"; then
SDATA_GOT=" "
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
2003-04-01 23:50:31 +08:00
CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
KEEP (*crtbegin?.o(.ctors))
2003-04-01 23:50:31 +08:00
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
2003-04-01 23:50:31 +08:00
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
2003-04-01 23:50:31 +08:00
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*crtbegin?.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
2003-04-01 23:50:31 +08:00
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
}"
# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi
cat <<EOF
ENTRY(${ENTRY})
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
if gld -r is used and the intermediate file has sections starting
at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
bug. But for now assigning the zero vmas works. */}
SECTIONS
{
/* Read-only sections, merged into text segment: */
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
2003-04-01 23:50:31 +08:00
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
2003-04-01 23:50:31 +08:00
${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
.hash ${RELOCATING-0} : { *(.hash) }
.dynsym ${RELOCATING-0} : { *(.dynsym) }
.dynstr ${RELOCATING-0} : { *(.dynstr) }
.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
.gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
.gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT=cat
else
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
.rel.init ${RELOCATING-0} : { *(.rel.init) }
.rela.init ${RELOCATING-0} : { *(.rela.init) }
.rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
.rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
.rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
.rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
.rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
.rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
2003-04-01 23:50:31 +08:00
.rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
.rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
.rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
.rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
.rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
.rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
.rel.got ${RELOCATING-0} : { *(.rel.got) }
.rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
.rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
.rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
.rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
.rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
cat <<EOF
}
EOF
fi
cat <<EOF
.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
${RELOCATING-$INIT_LIT}
${RELOCATING-$INIT}
${DATA_PLT-${BSS_PLT-${PLT}}}
2003-04-01 23:50:31 +08:00
.text ${RELOCATING-0} :
{
*(.got.plt* .plt*)
${RELOCATING+${INIT_START}}
${RELOCATING+KEEP (*(.init.literal))}
${RELOCATING+KEEP (*(.init))}
${RELOCATING+${INIT_END}}
${RELOCATING+${TEXT_START_SYMBOLS}}
bfd/ * elf32-xtensa.c (xtensa_get_property_section_name): Delete. (xtensa_get_property_section): New. (xtensa_read_table_entries): Use xtensa_get_property_section. (relax_property_section, xtensa_get_property_predef_flags): Handle group name suffixes in property section names. (match_section_group): New. gas/ * config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete. (INIT_LITERAL_SECTION_NAME): Delete. (lit_state struct): Remove segment names, init_lit_seg, and fini_lit_seg. Add lit_prefix and current_text_seg. (init_literal_head_h, init_literal_head): Delete. (fini_literal_head_h, fini_literal_head): Delete. (xtensa_begin_directive): Move argument parsing to xtensa_literal_prefix function. (xtensa_end_directive): Deallocate lit_prefix field of lit_state. (xtensa_literal_prefix): Parse the directive argument here and record it in the lit_prefix field. Remove code to derive literal section names. (linkonce_len): New. (get_is_linkonce_section): Use linkonce_len. Check for any ".gnu.linkonce.*" section, not just text sections. (md_begin): Remove initialization of deleted lit_state fields. (xtensa_reorder_segments, xtensa_post_relax_hook): Remove references to init_literal_head and fini_literal_head. (xtensa_move_literals): Likewise. Skip literals for .init and .fini when traversing literal_head list. (match_section_group): New. (cache_literal_section): Rewrite to determine the literal section name on the fly, create the section and return it. (xtensa_switch_to_literal_fragment): Adjust for cache_literal_section. (xtensa_switch_to_non_abs_literal_fragment): Likewise. (xtensa_create_property_segments, xtensa_create_xproperty_segments): Use xtensa_get_property_section from bfd. (retrieve_xtensa_section): Delete. * doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals description to refer to plural literal sections and add xref to the Literal Directive section. (Literal Directive): Describe new rules for deriving literal section names. Add footnote for special case of .init/.fini with --text-section-literals. (Literal Prefix Directive): Replace old naming rules with xref to the Literal Directive section. ld/ * emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*. * scripttempl/elfxtensa.sc (.text): Add .literal.*.
2006-08-25 08:08:55 +08:00
*(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
KEEP (*(.text.*personality*))
2003-04-01 23:50:31 +08:00
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
${RELOCATING+${FINI_START}}
${RELOCATING+KEEP (*(.fini.literal))}
${RELOCATING+KEEP (*(.fini))}
${RELOCATING+${FINI_END}}
} =${NOP-0}
${RELOCATING-$FINI_LIT}
${RELOCATING-$FINI}
${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
2003-04-01 23:50:31 +08:00
${WRITABLE_RODATA-${RODATA}}
.rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
.gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
2003-04-01 23:50:31 +08:00
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
2003-04-01 23:50:31 +08:00
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
/* Exception handling */
.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
.gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Thread Local Storage sections */
.tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
.tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
2003-04-01 23:50:31 +08:00
.preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
}
.init_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
}
.fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
KEEP (*(.fini_array))
KEEP (*(SORT(.fini_array.*)))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
}
2003-04-01 23:50:31 +08:00
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${TEXT_DYNAMIC-${DYNAMIC}}
${DATA_GOT+${RELRO_NOW+${GOT}}}
${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${RELOCATING+${DATA_SEGMENT_RELRO_END}}
${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
2003-04-01 23:50:31 +08:00
.data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
KEEP (*(.gnu.linkonce.d.*personality*))
2003-04-01 23:50:31 +08:00
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
${SDATA_GOT+${GOT}}
${SDATA_GOT+${OTHER_GOT_SECTIONS}}
2003-04-01 23:50:31 +08:00
${SDATA}
${OTHER_SDATA_SECTIONS}
${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}}
2003-04-01 23:50:31 +08:00
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
2003-04-01 23:50:31 +08:00
.bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
${RELOCATING+. = ALIGN(${ALIGNMENT});}
}
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
2003-04-01 23:50:31 +08:00
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+${OTHER_END_SYMBOLS}}
${RELOCATING+_end = .;}
2003-04-01 23:50:31 +08:00
${RELOCATING+PROVIDE (end = .);}
${RELOCATING+${DATA_SEGMENT_END}}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
${STACK_ADDR+${STACK}}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_SYMBOLS}}
bfd ChangeLog * elf32-xtensa.c (elf32xtensa_size_opt): New global variable. (xtensa_default_isa): Global variable moved here from xtensa-isa.c. (elf32xtensa_no_literal_movement): New global variable. (elf_howto_table): Add entries for new relocations. (elf_xtensa_reloc_type_lookup): Handle new relocations. (property_table_compare): When addresses are equal, compare sizes and various property flags. (property_table_matches): New. (xtensa_read_table_entries): Extend to read new property tables. Add output_addr parameter to indicate that output addresses should be used. Use bfd_get_section_limit. (elf_xtensa_find_property_entry): New. (elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry. (elf_xtensa_check_relocs): Handle new relocations. (elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new relocations. Use new xtensa-isa.h functions. (build_encoding_error_message): Remove encode_result parameter. Add new target_address parameter used to detect alignment errors. (elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up error handling. Use new is_operand_relocation function. (elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data): Use underbar macro for error messages. Formatting. (get_const16_opcode): New. (get_l32r_opcode): Add a separate flag for initialization. (get_relocation_opnd): Operand number is no longer explicit in the relocation. Change to decode the opcode and analyze its operands. (get_relocation_slot): New. (get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit. Use new xtensa-isa.h functions to handle multislot instructions. (is_l32r_relocation): Add bfd parameter. Use is_operand_relocation. (get_asm_simplify_size, is_alt_relocation, is_operand_relocation, insn_decode_len, insn_decode_opcode, check_branch_target_aligned, check_loop_aligned, check_branch_target_aligned_address, narrowable, widenable, narrow_instruction, widen_instruction, op_single_fmt_table, get_single_format, init_op_single_format_table): New. (elf_xtensa_do_asm_simplify): Add error_message parameter and use it instead of calling _bfd_error_handler. Use new xtensa-isa.h functions. (contract_asm_expansion): Add error_message parameter and pass it to elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation with R_XTENSA_SLOT0_OP. (get_expanded_call_opcode): Extend to handle either L32R or CONST16 instructions. Use new xtensa-isa.h functions. (r_reloc struct): Add new virtual_offset field. (r_reloc_init): Add contents and content_length parameters. Set virtual_offset field to zero. Add contents to target_offset field for partial_inplace relocations. (r_reloc_is_defined): Check for null. (print_r_reloc): New debug function. (source_reloc struct): Replace xtensa_operand field with pair of the opcode and the operand position. Add is_abs_literal field. (init_source_reloc): Specify operand by opcode/position pair. Set is_abs_literal field. (source_reloc_compare): When target_offsets are equal, compare other fields to make sorting predictable. (literal_value struct): Add is_abs_literal field. (value_map_hash_table struct): Add has_last_loc and last_loc fields. (init_literal_value): New. (is_same_value): Replace with ... (literal_value_equal): ... this function. Add comparisons of virtual_offset and is_abs_literal fields. (value_map_hash_table_init): Use bfd_zmalloc. Check for allocation failure. Initialize has_last_loc field. (value_map_hash_table_delete): New. (hash_literal_value): Rename to ... (literal_value_hash): ... this. Include is_abs_literal flag and virtual_offset field in the hash value. (get_cached_value): Rename to ... (value_map_get_cached_value): ... this. Update calls to literal_value_hash and literal_value_equal. (add_value_map): Check for allocation failure. Update calls to value_map_get_cached_value and literal_value_hash. (text_action, text_action_list, text_action_t): New types. (find_fill_action, compute_removed_action_diff, adjust_fill_action, text_action_add, text_action_add_literal, offset_with_removed_text, offset_with_removed_text_before_fill, find_insn_action, print_action_list, print_removed_literals): New. (offset_with_removed_literals): Delete. (xtensa_relax_info struct): Add is_relaxable_asm_section, action_list, fix_array, fix_array_count, allocated_relocs, relocs_count, and allocated_relocs_count fields. (init_xtensa_relax_info): Initialize new fields. (reloc_bfd_fix struct): Add new translated field. (reloc_bfd_fix_init): Add translated parameter and use it to set the translated field. (fix_compare, cache_fix_array): New. (get_bfd_fix): Remove fix_list parameter and get all relax_info for the section via get_xtensa_relax_info. Use cache_fix_array to set up sorted fix_array and use bsearch instead of linear search. (section_cache_t): New struct. (init_section_cache, section_cache_section, clear_section_cache): New. (ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types. (init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds, extend_ebb_bounds_forward, extend_ebb_bounds_backward, insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action): New. (retrieve_contents): Use bfd_get_section_limit. (elf_xtensa_relax_section): Add relocations_analyzed flag. Update call to compute_removed_literals. Free value_map_hash_table when no longer needed. (analyze_relocations): Check is_relaxable_asm_section flag. Call compute_text_actions for all sections. (find_relaxable_sections): Mark sections as relaxable if they contain ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init call. Increment relax_info src_count field only for appropriate relocation types. Remove is_literal_section check. (collect_source_relocs): Use bfd_get_section_limit. Adjust calls to r_reloc_init and find_associated_l32r_irel. Check is_relaxable_asm_section flag. Handle L32R instructions with absolute literals. Pass is_abs_literal flag to init_source_reloc. (is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for CONST16 instructions. Adjust calls to r_reloc_init and pcrel_reloc_fits. Handle weak symbols conservatively. (find_associated_l32r_irel): Add bfd parameter and pass it to is_l32r_relocation. (compute_text_actions, compute_ebb_proposed_actions, compute_ebb_actions, check_section_ebb_pcrels_fit, check_section_ebb_reduces, text_action_add_proposed, compute_fill_extra_space): New. (remove_literals): Replace with ... (compute_removed_literals): ... this function. Call init_section_cache. Use bfd_get_section_limit. Sort internal_relocs. Call xtensa_read_table_entries to get the property table. Skip relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new is_removable_literal, remove_dead_literal, and identify_literal_placement functions. (get_irel_at_offset): Rewrite to use bsearch on sorted relocations instead of linear search. (is_removable_literal, remove_dead_literal, identify_literal_placement): New. (relocations_reach): Update check for literal not referenced by any PC-relative relocations. Adjust call to pcrel_reloc_fits. (coalesce_shared_literal, move_shared_literal): New. (relax_section): Use bfd_get_section_limit. Call translate_section_fixes. Update calls to r_reloc_init and offset_with_removed_text. Check new is_relaxable_asm_section flag. Add call to pin_internal_relocs. Add special handling for R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset info to calculate new addend_displacement variable. Replace code for deleting literals with more general code to perform the actions determined by the action_list for the section. (translate_section_fixes, translate_reloc_bfd_fix): New. (translate_reloc): Check new is_relaxable_asm_section flag. Call find_removed_literal only if is_operand_relocation. Update call to offset_with_removed_text. Use new target_offset and removed_bytes variables. (move_literal): New. (relax_property_section): Use bfd_get_section_limit. Set new is_full_prop_section flag and handle new property tables. Update calls to r_reloc_init and offset_with_removed_text. Check is_relaxable_asm_section flag. Handle expansion of zero-sized unreachable entries, with use of offset_with_removed_text_before_fill. For relocatable links, combine entries only for literal tables. (relax_section_symbols): Check is_relaxable_asm_section flag. Update calls to offset_with_removed_text. Translate st_size field for function symbols. (do_fix_for_relocatable_link): Change to return bfd_boolean to indicate failure. Add contents parameter. Update call to get_bfd_fix. Update call to r_reloc_init. Call _bfd_error_handler and return FALSE for R_XTENSA_ASM_EXPAND relocs. (do_fix_for_final_link): Add input_bfd and contents parameters. Update call to get_bfd_fix. Include offset from contents for partial_inplace relocations. (is_reloc_sym_weak): New. (pcrel_reloc_fits): Use new xtensa-isa.h functions. (prop_sec_len): New. (xtensa_is_property_section): Handle new property sections. (is_literal_section): Delete. (internal_reloc_compare): When r_offset matches, compare r_info and r_addend to make sorting predictable. (internal_reloc_matches): New. (xtensa_get_property_section_name): Handle new property sections. (xtensa_get_property_predef_flags): New. (xtensa_callback_required_dependence): Use bfd_get_section_limit. Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init. * xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c. (xtisa_errno, xtisa_error_msg): New variables. (xtensa_isa_errno, xtensa_isa_error_msg): New. (xtensa_insnbuf_alloc): Add error handling. (xtensa_insnbuf_to_chars): Add num_chars parameter. Update to use xtensa_format_decode. Add error handling. (xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the instruction length to find the number of bytes to copy. (xtensa_isa_init): Add error handling. Replace calls to xtensa_load_isa and xtensa_extend_isa with code to initialize lookup tables in the xtensa_modules structure. (xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa, xtensa_extend_isa): Delete. (xtensa_isa_free): Change to only free lookup tables. (opname_lookup_compare): Replace with ... (xtensa_isa_name_compare): ... this function. Use strcasecmp. (xtensa_insn_maxlength): Rename to ... (xtensa_isa_maxlength): ... this. (xtensa_insn_length): Delete. (xtensa_insn_length_from_first_byte): Replace with ... (xtensa_isa_length_from_chars): ... this function. (xtensa_num_opcodes): Rename to ... (xtensa_isa_num_opcodes): ... this. (xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_regfiles, xtensa_isa_num_stages, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot): New functions. (xtensa_opcode_lookup): Add error handling. (xtensa_decode_insn): Replace with ... (xtensa_opcode_decode): ... this function, with new format and slot parameters. Add error handling. (xtensa_encode_insn): Replace with ... (xtensa_opcode_encode): ... this function, which does the encoding via one of the entries in the "encode_fns" array. Add error handling. (xtensa_opcode_name): Add error handling. (xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call): New. (xtensa_num_operands): Replace with ... (xtensa_opcode_num_operands): ... this function. Add error handling. (xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible): New. (xtensa_get_operand, xtensa_operand_kind): Delete. (xtensa_operand_inout): Add error handling and special-case for "sout" operands. (xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to operate on one slot of an instruction. Added error handling. (xtensa_operand_encode): Handle default operands with no encoding functions. Check for success by comparing against decoded value. Add error handling. (xtensa_operand_decode): Handle default operands. Return decoded value through argument pointer. Add error handling. (xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg): New. (xtensa_operand_isPCRelative): Rename to ... (xtensa_operand_is_PCrelative): ... this. Add error handling. (xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value through argument pointer. Add error handling. (xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New. * xtensa-modules.c: Rewrite to use new data structures. * reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16, BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP, BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP, BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP, BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP, BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP, BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP, BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP, BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP, BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT, BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT, BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT, BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT, BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT, BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT, BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT, BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations. * Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * libbfd.h: Likewise. gas ChangeLog * config/tc-xtensa.c (absolute_literals_supported): New global flag. (UNREACHABLE_MAX_WIDTH): Define. (XTENSA_FETCH_WIDTH): Delete. (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end, prefer_const16, prefer_l32r): New global variables. (LIT4_SECTION_NAME): Define. (lit4_state struct): Add lit4_seg_name and lit4_seg fields. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. (frag_flags struct): New. (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field. (subseg_map struct): Add cur_total_freq and cur_target_freq fields. (bitfield, bit_is_set, set_bit, clear_bit): Define. (MAX_FORMATS): Define. (op_placement_info struct, op_placement_table): New. (O_pltrel, O_hi16, O_lo16): Define. (directiveE enum): Rename directive_generics to directive_transform. Delete directive_relax. Add directive_schedule, directive_absolute_literals, and directive_last_directive. (directive_info): Rename "generics" to "transform". Delete "relax". Add "schedule" and "absolute-literals". (directive_state): Adjust entries to match changes in directive_info. (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h. (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode, xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New. (xtensa_j_opcode, xtensa_rsr_opcode): Delete. (align_only_targets, software_a0_b_retw_interlock, software_avoid_b_j_loop_end, maybe_has_b_j_loop_end, software_avoid_short_loop, software_avoid_close_loop_end, software_avoid_all_short_loops, specific_opcode): Delete. (warn_unaligned_branch_targets): New. (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop, workaround_close_loop_end, workaround_all_short_loops): Default FALSE. (option_[no_]link_relax, option_[no_]transform, option_[no_]absolute_literals, option_warn_unaligned_targets, option_prefer_l32r, option_prefer_const16, option_target_hardware): New enum values. (option_[no_]align_only_targets, option_literal_section_name, option_text_section_name, option_data_section_name, option_bss_section_name, option_eb, option_el): Delete. (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals, warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax, and target-hardware. Delete entries for [no-]target-align-only, literal-section-name, text-section-name, data-section-name, and bss-section-name. (md_parse_option): Handle new options and remove old ones. Accept but ignore [no-]density options. Warn for [no-]generics and [no-]relax and treat them as [no-]transform. (md_show_usage): Add new options and remove old ones. (xtensa_setup_hw_workarounds): New. (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add "long", "short", "loc" and "frequency" entries. (use_generics): Rename to ... (use_transform): ... this function. Add past_xtensa_end check. (use_longcalls): Add past_xtensa_end check. (code_density_available, can_relax): Delete. (do_align_targets): New. (get_directive): Accept dashes in directive names. Warn about [no-]generics and [no-]relax directives and treat them as [no-]transform. (xtensa_begin_directive): Call md_flush_pending_output only for some directives. Check for directives inside instruction bundles. Warn about deprecated ".begin literal" usage. Warn and ignore [no-]density directives. Handle new directives. Check generating_literals flag for literal_prefix. (xtensa_end_directive): Check for directives inside instruction bundles. Warn and ignore [no-]density directives. Handle new directives. Call xtensa_set_frag_assembly_state. (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): New. (xtensa_literal_position): Call md_flush_pending_output. Do not check use_literal_section flag. (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute literals. Use xtensa_elf_cons to parse the expression. (xtensa_literal_prefix): Do not check use_literal_section. Support ".lit4" sections for absolute literals. Change prefix convention to replace ".text" (or ".t" in a linkonce section). No need to call subseg_set. (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New. (expression_end): Handle closing braces and colons. (PLT_SUFFIX, plt_suffix): Delete. (expression_maybe_register): Use new xtensa-isa.h functions. Use xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16 and O_hi16 expressions as well. (tokenize_arguments): Handle closing braces and colons. (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible" operands and paired register syntax. (get_invisible_operands): New. (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use new xtensa-isa.h functions. (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New. (xg_translate_idioms): Check if inside bundle. Use use_transform. Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density instructions. Use xtensa_translate_zero_immed. (operand_is_immed, operand_is_pcrel_label): Delete. (get_relaxable_immed): Use new xtensa-isa.h functions. (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h functions. (xtensa_print_insn_table, print_vliw_insn): New. (is_direct_call_opcode): Use new xtensa-isa.h functions. (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode, is_branch_or_jump_opcode): Delete. (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New. (opnum_to_reloc, reloc_to_opnum): Delete. (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new xtensa-isa.h functions. Operate on one slot of an instruction. (xtensa_insnbuf_set_immediate_field, is_negatable_branch, xg_get_insn_size): Delete. (xg_get_build_instr_size): Use xg_get_single_size. (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_get_max_narrow_insn_size): Delete. (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size, xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and OP_OPERAND_LOW16U. Check xg_valid_literal_expression. (xg_expand_to_stack, xg_expand_narrow): Update calls to xg_build_widen_table. Use xg_get_single_size. (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to xg_check_operand. (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and treat weak symbols conservatively. (xg_check_operand): Use new xtensa-isa.h functions. (is_dnrange): Delete. (xg_assembly_relax): Inline previous calls to tinsn_copy. (xg_finish_frag): Specify separate relax states for the frag and slot0. (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new xtensa-isa.h functions. (xg_instruction_matches_option_term, xg_instruction_matches_or_options, xg_instruction_matches_options): New. (xg_instruction_matches_rule): Handle O_register expressions. Call xg_instruction_matches_options. (transition_rule_cmp): New. (xg_instruction_match): Update call to xg_build_simplify_table. (xg_build_token_insn): Record loc fields. (xg_simplify_insn): Check is_specific_opcode field and density_supported flag. (xg_expand_assembly_insn): Skip checking code_density_available. Use new xtensa-isa.h functions. Call use_transform instead of can_relax. (xg_assemble_literal): Add error handling for O_big. Call record_alignment. Handle O_pltrel. (xg_valid_literal_expression): New. (xg_assemble_literal_space): Add slot parameter. Remove call to set_expr_symbol_offset. Add call to record_alignment. Update call to xg_finish_frag. (xg_emit_insn): Delete. (xg_emit_insn_to_buf): Add format parameter. Update calls to xg_add_opcode_fix and xtensa_insnbuf_to_chars. (xg_add_opcode_fix): Change opcode parameter to tinsn and add format and slot parameters. Handle new "alternate" relocations for absolute literals and CONST16 instructions. Check for bad uses of O_lo16 and O_hi16. Use new xtensa-isa.h functions. (xg_assemble_tokens): Delete. (is_register_writer): Use new xtensa-isa.h functions. (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of old-style RSR from LCOUNT. (next_frag_opcode): Delete. (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size, update_next_frag_state): New. (update_next_frag_nop_state): Delete. (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop. (xtensa_mark_literal_pool_location): Check use_literal_section flag and the state of the absolute-literals directive. Add calls to record_alignment and xtensa_set_frag_assembly_state. Call xtensa_switch_to_non_abs_literal_fragment instead of xtensa_switch_to_literal_fragment. (build_nop): New. (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars. (get_expanded_loop_offset): Change check for undefined opcode to an assertion. (xtensa_set_frag_assembly_state, relaxable_section, xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets, xtensa_find_unaligned_loops, xg_apply_tentative_value): New. (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1. Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes. Call init_op_placement_info_table and xtensa_set_frag_assembly_state. (xtensa_init_fix_data): New. (xtensa_frob_label): Reset label symbol to the current frag. Check do_align_targets and generating_literals flag. Propagate frequency info to new alignment frag. Call xtensa_set_frag_assembly_state. (xtensa_unrecognized_line): New. (xtensa_flush_pending_output): Check if inside a bundle. Add a call to xtensa_set_frag_assembly_state. (error_reset_cur_vinsn): New. (md_assemble): Remove check for literal frag. Remove call to istack_init. Call use_transform instead of use_generics. Parse explicit instruction format specifiers. Move code for a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call error_reset_cur_vinsn on errors. Add call to get_invisible_operands. Add dwarf2_where call. Remote automatic alignment for ENTRY instructions. Move call to xtensa_clear_insn_labels to the end. Rearrange to handle bundles. (xtensa_cons_fix_new): Delete. (xtensa_handle_align): New. (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove assignment to is_no_density field. (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc instead of reloc_to_opnum. Handle "alternate" relocations. (xtensa_force_relocation, xtensa_check_inside_bundle, xtensa_elf_section_change_hook): New. (xtensa_symbol_new_hook): Delete. (xtensa_fix_adjustable): Check for difference of symbols with an offset. Check for external and weak symbols. (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs. (md_estimate_size_before_relax): Return expansion for the first slot. (tc_gen_reloc): Handle difference of symbols by producing XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference into the output. Handle new XTENSA_SLOT*_OP relocs by storing the tentative values into the output when linkrelax is set. (XTENSA_PROP_SEC_NAME): Define. (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags. Create literal tables only if using literal sections. Create new property tables instead of old instruction tables. Check for unaligned branch targets and loops. (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes, new_resource_table, clear_resource_table, resize_resource_table, resources_available, reserve_resources, release_resources, opcode_funcUnit_use_unit, opcode_funcUnit_use_stage, resources_conflict, xg_find_narrowest_format, relaxation_requirements, bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New. (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end flag. Update checks for workaround options. Call xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns. (xtensa_cleanup_align_frags): Add special case for branch targets. Check for and mark unreachable frags. (xtensa_fix_target_frags): Remove use of align_only_targets flag. Use RELAX_LOOP_END_BYTES in special case for negatable branch at the end of a zero-overhead loop body. (frag_can_negate_branch): Handle instructions with multiple slots. Use new xtensa-isa.h functions (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range, xtensa_mark_zcl_first_insns): New. (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if transformations are disabled. (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle multislot instructions. (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags): Likewise. Also error if transformations are disabled. (unrelaxed_frag_max_size): New. (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new xtensa-isa.h functions. (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use xtensa_opcode_is_loop instead of is_loop_opcode. (get_text_align_power): Replace as_fatal with assertion. (get_text_align_fill_size): Iterate instead of using modulus when use_nops is false. (get_noop_aligned_address): Assert that this is for a machine-dependent RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop, xg_get_single_size, and frag_format_size. (get_widen_aligned_address): Rename to ... (get_aligned_diff): ... this function. Add max_diff parameter. Remove handling of rs_align/rs_align_code frags. Use next_frag_format_size, get_text_align_power, get_text_align_fill_size, next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff and pass it back to caller. (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen. (relax_frag_text_align): Rename to ... (relax_frag_loop_align): ... this function. Assume loops can only be in the first slot of an instruction. (relax_frag_add_nop): Use assemble_nop instead of constructing an OR instruction. Remove call to frag_wane. (relax_frag_narrow): Rename to ... (relax_frag_for_align): ... this function. Extend to handle RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with RELAX_NARROW for the first slot. (find_address_of_next_align_frag, bytes_to_stretch): New. (future_alignment_required): Use find_address_of_next_align_frag and bytes_to_stretch. Look ahead to subsequent frags to make smarter alignment decisions. (relax_frag_immed): Add format, slot, and estimate_only parameters. Check if transformations are enabled for b_j_loop_end workaround. Use new xtensa-isa.h functions and handle multislot instructions. Update call to xg_assembly_relax. (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP frag types. (convert_frag_narrow): Add segP, format and slot parameters. Call convert_frag_immed for branch instructions. Adjust calls to tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use xg_get_single_size and xg_get_single_format. (convert_frag_fill_nop): New. (convert_frag_immed): Add format and slot parameters. Handle multislot instructions and use new xtensa-isa.h functions. Update calls to tinsn_immed_from_frag and xg_assembly_relax. Check if transformations enabled for b_j_loop_end workaround. Use build_nop instead of assemble_nop. Check is_specific_opcode flag. Check for unreachable frags. Use xg_get_single_size. Handle O_pltrel. (fix_new_exp_in_seg): Remove check for old plt flag. (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check for loop opcode to an assertion. Mark all frags up to the end of the loop as not transformable. (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info. (get_subseg_info): New. (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null check for dest_seg. (xtensa_switch_to_literal_fragment): Rewrite to handle absolute literals and use xtensa_switch_to_non_abs_literal_fragment otherwise. (xtensa_switch_to_non_abs_literal_fragment): New. (cache_literal_section): Add is_code parameter and pass it through to retrieve_literal_seg. (retrieve_literal_seg): Add is_code parameter and use it to set the flags on the literal section. Handle case where head parameter is 0. (get_frag_is_no_transform, set_frag_is_specific_opcode, set_frag_is_no_transform): New. (xtensa_create_property_segments): Add end_property_function parameter and pass it through to add_xt_block_frags. Call bfd_get_section_flags and skip SEC_DEBUGGING and !SEC_ALLOC sections. (xtensa_create_xproperty_segments, section_has_xproperty): New. (add_xt_block_frags): Add end_property_function parameter and call it if it is non-zero. Call xtensa_frag_flags_init. (xtensa_frag_flags_is_empty, xtensa_frag_flags_init, get_frag_property_flags, frag_flags_to_number, xtensa_frag_flags_combinable, xt_block_aligned_size, xtensa_xt_block_combine, add_xt_prop_frags, init_op_placement_info_table, opcode_fits_format_slot, xg_get_single_size, xg_get_single_format): New. (istack_push): Inline call to tinsn_copy. (tinsn_copy): Delete. (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and CONST16 opcodes. Handle O_big, O_illegal, and O_absent. (tinsn_has_complex_operands): Handle O_hi16 and O_lo16. (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h functions. Handle invisible operands. (tinsn_to_slotbuf): New. (tinsn_check_arguments): Use new xtensa-isa.h functions. (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn, vinsn_from_chars, and xg_free_vinsn. (tinsn_from_insnbuf): New. (tinsn_immed_from_frag): Add slot parameter and handle multislot instructions. Handle symbol differences. (get_num_stack_text_bytes): Use xg_get_single_size. (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes, xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register, get_expr_register, set_expr_symbol_offset_diff): New. * config/tc-xtensa.h (MAX_SLOTS): Define. (xtensa_relax_statesE): Move from tc-xtensa.c. Add RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS, RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and RELAX_NONE types. (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c. (xtensa_frag_type struct): Add is_assembly_state_set, use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode, is_align, is_text_align, alignment, and is_first_loop_insn fields. Replace is_generics and is_relax fields by is_no_transform field. Delete is_text and is_longcalls fields. Change text_expansion and literal_expansion to arrays of MAX_SLOTS entries. Add arrays of per-slot information: literal_frags, slot_subtypes, slot_symbols, slot_sub_symbols, and slot_offsets. Add fr_prev field. (xtensa_fix_data struct): New. (xtensa_symfield_type struct): Delete plt field. (xtensa_block_info struct): Move definition to tc-xtensa.h. Add forward declaration here. (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec. (XTENSA_SECTION_RENAME): Undefine. (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT, tc_unrecognized_line, md_do_align, md_elf_section_change_hook, HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define. (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete. (unit_num_copies_func, opcode_num_units_func, opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New. (resource_table struct): New. * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10. (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype, literal_space, symbol, sub_symbol, offset, and literal_frag fields. (tinsn_copy): Delete prototype. (vliw_insn struct): New. * config/xtensa-relax.c (insn_pattern_struct): Add options field. (widen_spec_list): Add option conditions for density and boolean instructions. Add expansions using CONST16 and conditions for using CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for predicted branches. (simplify_spec_list): Add option conditions for density instructions. Add entry for NOP instruction. (append_transition): Add cmp function pointer parameter and use it to insert the new entry in order. (operand_function_LOW16U, operand_function_HI16U): New. (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (enter_opname, split_string): Use xstrdup instead of strdup. (init_insn_pattern): Initialize new options field. (clear_req_or_option_list, clear_req_option_list, clone_req_or_option_list, clone_req_option_list, parse_option_cond): New. (parse_insn_pattern): Parse option conditions. (transition_applies): New. (build_transition): Use new xtensa-isa.h functions. Fix incorrectly swapped last arguments in calls to append_constant_value_condition. Call clone_req_option_list. Add warning about invalid opcode. Handle LOW16U and HI16U function names. (build_transition_table): Add cmp parameter and use it in calls to append_transition. Use new xtensa-isa.h functions. Check transition_applies before adding entries. (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and pass it through to build_transition_table. * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList, ReqOption, transition_cmp_fn): New types. (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U. (transition_rule struct): Add options field. * doc/as.texinfo (Overview): Update Xtensa options. * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density, --[no-]relax, and --[no-]generics options. Update descriptions of --text-section-literals and --[no-]longcalls. Add --[no-]absolute-literals and --[no-]transform. (Xtensa Syntax): Add description of syntax for FLIX instructions. Remove use of "generic" and "specific" terminology for opcodes. (Xtensa Registers): Generalize the syntax description to include user-defined register files. (Xtensa Automatic Alignment): Update. (Xtensa Branch Relaxation): Mention limitation of unconditional jumps. (Xtensa Call Relaxation): Linker can now remove most of the overhead. (Xtensa Directives): Remove confusing rules about precedence. (Density Directive, Relax Directive): Delete. (Schedule Directive): New. (Generics Directive): Rename to ... (Transform Directive): ... this node. (Literal Directive): Update for absolute literals. Missing literal_position directive is now an error. (Literal Position Directive): Update for absolute literals. (Freeregs Directive): Delete. (Absolute Literals Directive): New. (Frame Directive): Minor editing. * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf): Update dependencies. * Makefile.in: Regenerate. gas/testsuite ChangeLog * gas/xtensa/all.exp: Adjust expected error message for j_too_far. Change entry_align test to expect an error. * gas/xtensa/entry_misalign2.s: Use no-transform instead of no-generics directives. include ChangeLog * xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS, XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New. (XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete. * xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete. (config_sturct struct): Delete. (XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE, XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN, XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP, XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL, XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define. (xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New. (xtensa_insn_decode_fn): Rename to ... (xtensa_opcode_decode_fn): ... this. (xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn, xtensa_undo_reloc_fn): Update. (xtensa_encoding_template_fn): Delete. (xtensa_opcode_encode_fn, xtensa_format_decode_fn, xtensa_length_decode_fn): New. (xtensa_format_internal, xtensa_slot_internal): New types. (xtensa_operand_internal): Delete operand_kind, inout, isPCRelative, get_field, and set_field fields. Add name, field_id, regfile, num_regs, and flags fields. (xtensa_arg_internal): New type. (xtensa_iclass_internal): Change operands field to array of xtensa_arg_internal. Add num_stateOperands, stateOperands, num_interfaceOperands, and interfaceOperands fields. (xtensa_opcode_internal): Delete length, template, and iclass fields. Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses. (opname_lookup_entry): Delete. (xtensa_regfile_internal, xtensa_interface_internal, xtensa_funcUnit_internal, xtensa_state_internal, xtensa_sysreg_internal, xtensa_lookup_entry): New. (xtensa_isa_internal): Replace opcode_table field with opcodes field. Change type of opname_lookup_table. Delete num_modules, module_opcode_base, module_decode_fn, config, and has_density fields. Add num_formats, formats, format_decode_fn, length_decode_fn, num_slots, slots, num_fields, num_operands, operands, num_iclasses, iclasses, num_regfiles, regfiles, num_states, states, state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table, max_sysreg_num, sysreg_table, num_interfaces, interfaces, interface_lookup_table, num_funcUnits, funcUnits and funcUnit_lookup_table fields. (xtensa_isa_module, xtensa_isa_modules): Delete. (xtensa_isa_name_compare): New prototype. (xtisa_errno, xtisa_error_msg): New. * xtensa-isa.h (XTENSA_ISA_VERSION): Define. (xtensa_isa): Change type. (xtensa_operand): Delete. (xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg, xtensa_interface, xtensa_funcUnit, xtensa_isa_status, xtensa_funcUnit_use): New types. (libisa_module_specifier): Delete. (xtensa_isa_errno, xtensa_isa_error_msg): New prototypes. (xtensa_insnbuf_free, xtensa_insnbuf_to_chars, xtensa_insnbuf_from_chars): Update prototypes. (xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa, xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn, xtensa_encode_insn, xtensa_insn_length, xtensa_insn_length_from_first_byte, xtensa_num_operands, xtensa_operand_kind, xtensa_encode_result, xtensa_operand_isPCRelative): Delete. (xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field, xtensa_operand_set_field, xtensa_operand_encode, xtensa_operand_decode, xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Update prototypes. (xtensa_isa_maxlength, xtensa_isa_length_from_chars, xtensa_isa_num_pipe_stages, xtensa_isa_num_formats, xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states, xtensa_isa_num_sysregs, xtensa_isa_num_interfaces, xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup, xtensa_format_decode, xtensa_format_encode, xtensa_format_length, xtensa_format_num_slots, xtensa_format_slot_nop_opcode, xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode, xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop, xtensa_opcode_is_call, xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands, xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses, xtensa_opcode_funcUnit_use, xtensa_operand_name, xtensa_operand_is_visible, xtensa_operand_is_register, xtensa_operand_regfile, xtensa_operand_num_regs, xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative, xtensa_stateOperand_state, xtensa_stateOperand_inout, xtensa_interfaceOperand_interface, xtensa_regfile_lookup, xtensa_regfile_lookup_shortname, xtensa_regfile_name, xtensa_regfile_shortname, xtensa_regfile_view_parent, xtensa_regfile_num_bits, xtensa_regfile_num_entries, xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits, xtensa_state_is_exported, xtensa_sysreg_lookup, xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number, xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name, xtensa_interface_num_bits, xtensa_interface_inout, xtensa_interface_has_side_effect, xtensa_funcUnit_lookup, xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes. * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32, R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations. (XTENSA_PROP_SEC_NAME): Define. (property_table_entry): Add flags field. (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define. ld ChangeLog * ld.texinfo (Xtensa): Describe new linker relaxation to optimize assembler-generated longcall sequences. Describe new --size-opt option. * emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section. * emultempl/xtensaelf.em (remove_section, replace_insn_sec_with_prop_sec, replace_instruction_table_sections, elf_xtensa_after_open): New. (OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, OPTION_NO_LITERAL_MOVEMENT): Define. (elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals. (PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement. (PARSE_AND_LIST_OPTIONS): Add --size-opt. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT. (LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open. * scripttempl/elfxtensa.sc: Update with changes from elf.sc. * Makefile.am (eelf32xtensa.c): Update dependencies. * Makefile.in: Regenerate. ld/testsuite ChangeLog * ld-xtensa/lcall1.s: Use .literal directive. * ld-xtensa/lcall2.s: Align function entry. * ld-xtensa/coalesce2.s: Likewise. opcodes ChangeLog * xtensa-dis.c (state_names): Delete. (fetch_data): Use xtensa_isa_maxlength. (print_xtensa_operand): Replace operand parameter with opcode/operand pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot instruction bundles. Use xmalloc instead of malloc.
2004-10-08 08:22:15 +08:00
${RELOCATING+${STACKNOTE}}
2003-04-01 23:50:31 +08:00
}
EOF