binutils-gdb/gdb/doc/Makefile.in

366 lines
11 KiB
Makefile
Raw Normal View History

##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
# Makefile for GDB documentation.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
srcdir = @srcdir@
VPATH = @srcdir@
prefix = @prefix@
infodir = @infodir@
1999-06-29 00:06:02 +08:00
htmldir = $(prefix)/html
SHELL = @SHELL@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# main GDB source directory
gdbdir = $(srcdir)/..
# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
1999-06-29 00:06:02 +08:00
MAKEHTML = texi2html
MAKEHTMLFLAGS = -glossary -menu -split_chapter
# where to find texi2roff, ditto
TEXI2ROFF=texi2roff
# Where is the source dir for the READLINE library doc?
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc
SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
# There may be alternate predefined collections of switches to configure
# the GDB manual. Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all
# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
# - Computer Modern (CM) fonts
# - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
# a4rc.sed use A4 paper (297 x 210 mm)
# psrc.sed use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
# for A4, CM fonts: REFEDITS = a4rc.sed
# for US, PS fonts: REFEDITS = psrc.sed
# for default:
REFEDITS =
# Don Knuth's TeX formatter
TEX = tex
# auxiliary program for sorting Texinfo indices
TEXINDEX = texindex
# Program to generate Postscript files from DVI files.
DVIPS = dvips
# Main GDB manual's source files
1999-08-31 09:14:27 +08:00
SFILES_INCLUDED = gdb-cfg.texi
SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
SFILES_DOC = $(SFILES_LOCAL) \
1999-08-17 03:57:19 +08:00
$(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texinfo
#### Host, target, and site specific Makefile fragments come in here.
###
all install:
info: gdb.info gdbint.info stabs.info
dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
ps: gdb.ps gdbint.ps stabs.ps refcard.ps
1999-06-29 00:06:02 +08:00
html: gdb_toc.html gdbint_toc.html stabs_toc.html
all-doc: info dvi ps
install-info: info
for i in *.info* ; do \
$(INSTALL_DATA) $$i $(infodir)/$$i ; \
done
1999-06-29 00:06:02 +08:00
install-html: html
for i in *.html ; do \
$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
done
STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
# Copy the object files from a particular stage into a subdirectory.
stage1: force
-mkdir stage1
-mv $(STAGESTUFF) stage1
stage2: force
-mkdir stage2
-mv $(STAGESTUFF) stage2
stage3: force
-mkdir stage3
-mv $(STAGESTUFF) stage3
against=stage2
comparison: force
for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
de-stage1: force
-(cd stage1 ; mv -f * ..)
-rmdir stage1
de-stage2: force
-(cd stage2 ; mv -f * ..)
-rmdir stage2
de-stage3: force
-(cd stage3 ; mv -f * ..)
-rmdir stage3
# The "least clean" level of cleaning. Get rid of files which are
# automatically generated files that are just intermediate files,
#
mostlyclean:
rm -f gdb.mm gdb.ms gdb.me links2roff
rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
rm -f sedref.dvi sedref.tex tmp.sed
clean: mostlyclean
1999-08-17 03:57:19 +08:00
rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
distclean: clean
rm -f Makefile config.status
# GDBvn.texi, the dvi files, the info files, and the postscript files,
# are all part of the distribution, so it should not be removed by
# "clean" or "distclean". Use maintainer-clean to remove them.
maintainer-clean realclean: distclean
1999-06-29 00:06:02 +08:00
rm -f GDBvn.texi *.info* *.dvi *.ps *.html
# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
if [ -z "$(REFEDITS)" ]; then \
cp $(srcdir)/refcard.tex sedref.tex ; \
else \
echo > tmp.sed ; \
for f in "$(REFEDITS)" ; do \
cat $(srcdir)/$$f >>tmp.sed ; done ; \
sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
fi
$(SET_TEXINPUTS) $(TEX) sedref.tex
mv sedref.dvi refcard.dvi
rm -f sedref.log sedref.tex tmp.sed
refcard.ps : refcard.dvi
$(DVIPS) -t landscape -o $@ $?
# File to record current GDB version number (copied from main dir Makefile.in)
GDBvn.texi : ${gdbdir}/Makefile.in
echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
mv GDBvn.new GDBvn.texi
# Updated atomically
.PRECIOUS: GDBvn.texi
# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
# Note that we can *generate* GDBvn.texi, but since we distribute one in the
# source directory for the benefit of people who *don't* use this makefile,
# VPATH will often tell make not to bother building it, because the one
# in the srcdir is up to date. (if not, then make should build one here).
# GDB MANUAL: TeX dvi file
gdb.dvi: ${SFILES_DOC}
if [ ! -f ./GDBvn.texi ]; then \
ln -s $(srcdir)/GDBvn.texi . || \
ln $(srcdir)/GDBvn.texi . || \
cp $(srcdir)/GDBvn.texi . ; else true; fi
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
$(TEXINDEX) gdb.??
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
gdb.tp* gdb.vr*
gdb.ps: gdb.dvi
$(DVIPS) -o $@ $?
# GDB MANUAL: info file
# We're using texinfo2, and older makeinfo's may not be able to
# cope with all the markup.
gdb.info: ${SFILES_DOC}
$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
# GDB MANUAL: roff translations
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
# corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
# texi2roff doesn't have a notion of include dirs, so we have to fake
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(SFILES_INCLUDED)
if [ ! -f gdb.texinfo ]; then \
ln -s $(SFILES_INCLUDED) . || \
ln $(SFILES_INCLUDED) . || \
cp $(SFILES_INCLUDED) . ; \
fi
touch links2roff
# "Readline" appendices. Get them also due to lack of includes,
# regardless of whether or not configuring in main sourcedir.
# @ftable removed due to bug in texi2roff-2; if your texi2roff
# is newer, try just ln or cp
rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
sed -e 's/^@ftable/@table/g' \
-e 's/^@end ftable/@end table/g' \
${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
1999-08-17 03:57:19 +08:00
inc-hist.texinfo: ${READLINE_DIR}/inc-hist.texinfo
ln -s ${READLINE_DIR}/inc-hist.texinfo . || \
ln ${READLINE_DIR}/inc-hist.texinfo . || \
cp ${READLINE_DIR}/inc-hist.texinfo .
# gdb manual suitable for [gtn]roff -me
1999-08-17 03:57:19 +08:00
gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -me | \
sed -e 's/---/\\(em/g' \
>gdb.me
# gdb manual suitable for [gtn]roff -ms
1999-08-17 03:57:19 +08:00
gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -ms | \
sed -e 's/---/\\(em/g' \
>gdb.ms
# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
# try leaving them in
1999-08-17 03:57:19 +08:00
gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
>gdb.mm
1999-06-29 00:06:02 +08:00
# GDB MANUAL: HTML file
gdb_toc.html: ${SFILES_DOC}
$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
$(TEXINDEX) gdbint.??
$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
gdbint.ps : gdbint.dvi
$(DVIPS) -o $@ $?
# GDB INTERNALS MANUAL: info file
gdbint.info: gdbint.texinfo
$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
1999-06-29 00:06:02 +08:00
# GDB INTERNALS MANUAL: HTML file
gdbint_toc.html: gdbint.texinfo
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
stabs.info: stabs.texinfo
$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
1999-06-29 00:06:02 +08:00
# STABS DOCUMENTATION: HTML file
stabs_toc.html: stabs.texinfo
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : stabs.texinfo
$(SET_TEXINPUTS) $(TEX) stabs.texinfo
$(TEXINDEX) stabs.??
$(SET_TEXINPUTS) $(TEX) stabs.texinfo
rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
stabs.ps: stabs.dvi
$(DVIPS) -o $@ $?
force:
Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
$(SHELL) ./config.status