x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
#source: ibt-plt-3.s
|
|
|
|
#as: --64 -defsym __64_bit__=1
|
2022-01-05 23:12:03 +08:00
|
|
|
#ld: -shared -m elf_x86_64 -z ibtplt --hash-style=sysv -z max-page-size=0x200000 -z noseparate-code $NO_DT_RELR_LDFLAGS
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
#objdump: -dw
|
|
|
|
|
|
|
|
.*: +file format .*
|
|
|
|
|
|
|
|
|
|
|
|
Disassembly of section .plt:
|
|
|
|
|
Define various symbols conditionally in shared libraries
The values of symbols in shared libraries like _end, _edata, and
__bss_start are generally not that useful outside of the shared
library. This patch defines them conditionally with PROVIDE, since a
shared library might need the local value. An example is glibc ld.so
local access to "_begin", "_etext" and "_end". (ld.so gains access to
the local values by making the references using hidden visibility.
That makes the definitions hidden too.)
We can't use PROVIDE_HIDDEN in the linker scripts because the shared
library might need the value of the symbol in the executable. An
example is freebsd libc dynamic access to "_end".
PR ld/23161
* emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__,
and __end__ in shared libraries.
* emulparams/aarch64fbsd.sh: Likewise.
* emulparams/aarch64linux.sh: Likewise.
* emulparams/aarch64linux32.sh: Likewise.
* emulparams/armelf_fuchsia.sh: Likewise.
* emulparams/armelf_linux.sh: Likewise.
* emulparams/armelf_phoenix.sh: Likewise.
* emulparams/aarch64elf.sh: Likewise, and __data_start
* emulparams/aarch64elf32.sh: Likewise.
* emulparams/armelf.sh: Likewise.
* emulparams/armnto.sh: Likewise.
* emulparams/elf32bmip.sh: Remove duplicate ". = ." from
OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs.
* emulparams/elf32lriscv-defs.sh: Tidy.
* emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in
shared libs
* emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs.
* emulparams/elf32rl78.sh: Tidy.
* emulparams/i386nto.sh: PROVIDE _btext in shared libs.
* emulparams/shelf_nto.sh: Likewise.
* emulparams/shlelf_nto.sh: Likewise.
* emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__,
__bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in
shared libs.
* scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared
libraries. PROVIDE _edata, edata, __bss_start, and _end in shared
libraries.
* testsuite/ld-elf/pr23161.map,
* testsuite/ld-elf/pr23161a.c,
* testsuite/ld-elf/pr23161b.c,
* testsuite/ld-elf/pr23161c.c,
* testsuite/ld-elf/pr23161a.rd,
* testsuite/ld-elf/pr23161b.rd,
* testsuite/ld-elf/pr23161c.rd,
* testsuite/ld-elf/pr23161d.rd: New tests.
* testsuite/ld-elf/shared.exp: Run ld/23161 tests.
* testsuite/ld-elf/pr23162.rd,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-alpha/tlsbin.rd,
* testsuite/ld-alpha/tlsbin.sd,
* testsuite/ld-alpha/tlsbinr.rd,
* testsuite/ld-alpha/tlspic.rd,
* testsuite/ld-alpha/tlspic.sd,
* testsuite/ld-cris/dso-pltdis1.d,
* testsuite/ld-cris/dso-pltdis2.d,
* testsuite/ld-cris/dso12-pltdis.d,
* testsuite/ld-cris/gotplt1.d,
* testsuite/ld-cris/gotplt2.d,
* testsuite/ld-cris/gotplt3.d,
* testsuite/ld-cris/hiddef1.d,
* testsuite/ld-cris/libdso-1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-12.d,
* testsuite/ld-cris/libdso-12b.d,
* testsuite/ld-cris/libdso-12c.d,
* testsuite/ld-cris/libdso-13.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/libdso-15b.d,
* testsuite/ld-cris/libdso-1c.d,
* testsuite/ld-cris/libdso-1d.d,
* testsuite/ld-cris/libdso-2.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/pr16044.d,
* testsuite/ld-cris/pv32-1.d,
* testsuite/ld-cris/tls-dso-dtpoffd2.d,
* testsuite/ld-cris/tls-dso-dtpoffd4.d,
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-cris/tls-gd-1.d,
* testsuite/ld-cris/tls-gd-1h.d,
* testsuite/ld-cris/tls-gd-2.d,
* testsuite/ld-cris/tls-gd-2h.d,
* testsuite/ld-cris/tls-ie-10.d,
* testsuite/ld-cris/tls-ie-11.d,
* testsuite/ld-cris/tls-ie-78.d,
* testsuite/ld-cris/tls-ie-8.d,
* testsuite/ld-cris/tls-ie-9.d,
* testsuite/ld-cris/tls-js1.d,
* testsuite/ld-cris/tls-ld-4.d,
* testsuite/ld-cris/tls-ld-5.d,
* testsuite/ld-cris/tls-ld-6.d,
* testsuite/ld-cris/tls-ld-7.d,
* testsuite/ld-cris/tls-ldgd-14.d,
* testsuite/ld-cris/tls-ldgd-15.d,
* testsuite/ld-cris/tls-ldgdex-14.d,
* testsuite/ld-cris/tls-ldgdex-15.d,
* testsuite/ld-cris/tls-ldgdx-14.d,
* testsuite/ld-cris/tls-ldgdx-15.d,
* testsuite/ld-cris/tls-legdx-16.d,
* testsuite/ld-cris/tls-legdx-17.d,
* testsuite/ld-cris/tls-local-54.d,
* testsuite/ld-cris/tls-local-60.d,
* testsuite/ld-cris/tls-local-61.d,
* testsuite/ld-cris/tls-local-63.d,
* testsuite/ld-cris/tls-local-64.d,
* testsuite/ld-cris/tls-ok-30.d,
* testsuite/ld-cris/tls-ok-32.d,
* testsuite/ld-cris/tls-ok-34.d,
* testsuite/ld-cris/tls-und-38.d,
* testsuite/ld-cris/tls-und-42.d,
* testsuite/ld-cris/tls-und-46.d,
* testsuite/ld-cris/tls-und-50.d,
* testsuite/ld-cris/weakhiddso.d,
* testsuite/ld-cris/weakref2.d,
* testsuite/ld-frv/fdpic-shared-1.d,
* testsuite/ld-frv/fdpic-shared-2.d,
* testsuite/ld-frv/fdpic-shared-3.d,
* testsuite/ld-frv/fdpic-shared-4.d,
* testsuite/ld-frv/fdpic-shared-5.d,
* testsuite/ld-frv/fdpic-shared-7.d,
* testsuite/ld-frv/fdpic-shared-8.d,
* testsuite/ld-frv/tls-dynamic-2.d,
* testsuite/ld-i386/ibt-plt-1.d,
* testsuite/ld-i386/ibt-plt-2a.d,
* testsuite/ld-i386/ibt-plt-2b.d,
* testsuite/ld-i386/ibt-plt-2c.d,
* testsuite/ld-i386/ibt-plt-2d.d,
* testsuite/ld-i386/ibt-plt-3a.d,
* testsuite/ld-i386/ibt-plt-3b.d,
* testsuite/ld-i386/ibt-plt-3c.d,
* testsuite/ld-i386/ibt-plt-3d.d,
* testsuite/ld-i386/plt2.dd,
* testsuite/ld-i386/pr20830.d,
* testsuite/ld-i386/tlsbin-nacl.rd,
* testsuite/ld-i386/tlsbin.rd,
* testsuite/ld-i386/tlsbin2-nacl.rd,
* testsuite/ld-i386/tlsbin2.rd,
* testsuite/ld-i386/tlsbindesc-nacl.rd,
* testsuite/ld-i386/tlsbindesc.rd,
* testsuite/ld-i386/tlsdesc-nacl.rd,
* testsuite/ld-i386/tlsdesc.rd,
* testsuite/ld-i386/tlsgdesc-nacl.rd,
* testsuite/ld-i386/tlsgdesc.rd,
* testsuite/ld-i386/tlsnopic-nacl.rd,
* testsuite/ld-i386/tlsnopic.dd,
* testsuite/ld-i386/tlsnopic.rd,
* testsuite/ld-i386/tlsnopic.sd,
* testsuite/ld-i386/tlspic-nacl.rd,
* testsuite/ld-i386/tlspic.rd,
* testsuite/ld-i386/tlspic2-nacl.rd,
* testsuite/ld-i386/tlspic2.rd,
* testsuite/ld-ia64/merge1.d,
* testsuite/ld-ia64/merge2.d,
* testsuite/ld-ia64/merge3.d,
* testsuite/ld-ia64/merge4.d,
* testsuite/ld-ia64/merge5.d,
* testsuite/ld-ia64/tlsbin.rd,
* testsuite/ld-ia64/tlspic.rd,
* testsuite/ld-ifunc/ifunc-2-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64.d,
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-x86-64.d,
* testsuite/ld-ifunc/pr17154-i386-now.d,
* testsuite/ld-ifunc/pr17154-i386.d,
* testsuite/ld-ifunc/pr17154-x86-64-now.d,
* testsuite/ld-ifunc/pr17154-x86-64.d,
* testsuite/ld-m68k/tls-def-1.d,
* testsuite/ld-m68k/tls-gd-1.d2,
* testsuite/ld-metag/shared.d,
* testsuite/ld-metag/stub_pic_app.d,
* testsuite/ld-mips-elf/rel32-n32.d,
* testsuite/ld-mips-elf/rel32-o32.d,
* testsuite/ld-mips-elf/rel64.d,
* testsuite/ld-powerpc/ambiguousv1.d,
* testsuite/ld-powerpc/ambiguousv1b.d,
* testsuite/ld-powerpc/ambiguousv2.d,
* testsuite/ld-powerpc/ambiguousv2b.d,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlsso.r,
* testsuite/ld-powerpc/tlsso32.g,
* testsuite/ld-powerpc/tlsso32.r,
* testsuite/ld-powerpc/tlstocso.d,
* testsuite/ld-powerpc/tlstocso.g,
* testsuite/ld-powerpc/tlstocso.r,
* testsuite/ld-s390/gotreloc_31-1.dd,
* testsuite/ld-s390/tlsbin.dd,
* testsuite/ld-s390/tlsbin.rd,
* testsuite/ld-s390/tlsbin_64.dd,
* testsuite/ld-s390/tlsbin_64.rd,
* testsuite/ld-s390/tlspic.rd,
* testsuite/ld-s390/tlspic_64.rd,
* testsuite/ld-sh/tlsbin-2.d,
* testsuite/ld-sh/tlspic-2.d,
* testsuite/ld-sparc/gotop32.rd,
* testsuite/ld-sparc/gotop64.rd,
* testsuite/ld-sparc/tlssunbin32.rd,
* testsuite/ld-sparc/tlssunbin64.rd,
* testsuite/ld-sparc/tlssunnopic32.rd,
* testsuite/ld-sparc/tlssunnopic64.rd,
* testsuite/ld-sparc/tlssunpic32.rd,
* testsuite/ld-sparc/tlssunpic64.rd,
* testsuite/ld-x86-64/bnd-branch-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2.d,
* testsuite/ld-x86-64/bnd-plt-1-now.d,
* testsuite/ld-x86-64/bnd-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-1-x32.d,
* testsuite/ld-x86-64/ibt-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-2a-x32.d,
* testsuite/ld-x86-64/ibt-plt-2a.d,
* testsuite/ld-x86-64/ibt-plt-2b-x32.d,
* testsuite/ld-x86-64/ibt-plt-2b.d,
* testsuite/ld-x86-64/ibt-plt-2c-x32.d,
* testsuite/ld-x86-64/ibt-plt-2c.d,
* testsuite/ld-x86-64/ibt-plt-2d-x32.d,
* testsuite/ld-x86-64/ibt-plt-2d.d,
* testsuite/ld-x86-64/ibt-plt-3a-x32.d,
* testsuite/ld-x86-64/ibt-plt-3a.d,
* testsuite/ld-x86-64/ibt-plt-3b-x32.d,
* testsuite/ld-x86-64/ibt-plt-3b.d,
* testsuite/ld-x86-64/ibt-plt-3c-x32.d,
* testsuite/ld-x86-64/ibt-plt-3c.d,
* testsuite/ld-x86-64/ibt-plt-3d-x32.d,
* testsuite/ld-x86-64/ibt-plt-3d.d,
* testsuite/ld-x86-64/ilp32-4-nacl.d,
* testsuite/ld-x86-64/ilp32-4.d,
* testsuite/ld-x86-64/load1c-nacl.d,
* testsuite/ld-x86-64/load1c.d,
* testsuite/ld-x86-64/load1d-nacl.d,
* testsuite/ld-x86-64/load1d.d,
* testsuite/ld-x86-64/mpx3n.dd,
* testsuite/ld-x86-64/mpx4.dd,
* testsuite/ld-x86-64/mpx4n.dd,
* testsuite/ld-x86-64/plt2.dd,
* testsuite/ld-x86-64/pr14207.d,
* testsuite/ld-x86-64/pr19162.d,
* testsuite/ld-x86-64/pr20253-1f.d,
* testsuite/ld-x86-64/pr20253-1l.d,
* testsuite/ld-x86-64/pr20830a-now.d,
* testsuite/ld-x86-64/pr20830a.d,
* testsuite/ld-x86-64/pr20830b-now.d,
* testsuite/ld-x86-64/pr20830b.d,
* testsuite/ld-x86-64/pr21038a-now.d,
* testsuite/ld-x86-64/pr21038a.d,
* testsuite/ld-x86-64/pr21038b-now.d,
* testsuite/ld-x86-64/pr21038b.d,
* testsuite/ld-x86-64/pr21038c-now.d,
* testsuite/ld-x86-64/pr21038c.d,
* testsuite/ld-x86-64/tlsbin-nacl.rd,
* testsuite/ld-x86-64/tlsbin.rd,
* testsuite/ld-x86-64/tlsbin2-nacl.rd,
* testsuite/ld-x86-64/tlsbin2.rd,
* testsuite/ld-x86-64/tlsbindesc-nacl.rd,
* testsuite/ld-x86-64/tlsbindesc.rd,
* testsuite/ld-x86-64/tlsdesc-nacl.rd,
* testsuite/ld-x86-64/tlsdesc.rd,
* testsuite/ld-x86-64/tlsgdesc-nacl.rd,
* testsuite/ld-x86-64/tlsgdesc.rd,
* testsuite/ld-x86-64/tlspic-nacl.rd,
* testsuite/ld-x86-64/tlspic.rd,
* testsuite/ld-x86-64/tlspic2-nacl.rd,
* testsuite/ld-x86-64/tlspic2.rd: Update.
2018-06-08 18:47:34 +08:00
|
|
|
0+1f0 <.plt>:
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: ff 35 ca 01 20 00 push 0x2001ca\(%rip\) # 2003c0 <_GLOBAL_OFFSET_TABLE_\+0x8>
|
|
|
|
+[a-f0-9]+: f2 ff 25 cb 01 20 00 bnd jmp \*0x2001cb\(%rip\) # 2003c8 <_GLOBAL_OFFSET_TABLE_\+0x10>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 0f 1f 00 nopl \(%rax\)
|
opcodes/i386: remove trailing whitespace from insns with zero operands
While working on another patch[1] I had need to touch this code in
i386-dis.c:
ins->obufp = ins->mnemonicendp;
for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
oappend (ins, " ");
oappend (ins, " ");
(*ins->info->fprintf_styled_func)
(ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
What this code does is add whitespace after the instruction mnemonic
and before the instruction operands.
The problem I ran into when working on this code can be seen by
assembling this input file:
.text
nop
retq
Now, when I disassemble, here's the output. I've replaced trailing
whitespace with '_' so that the issue is clearer:
Disassembly of section .text:
0000000000000000 <.text>:
0: 90 nop
1: c3 retq___
Notice that there's no trailing whitespace after 'nop', but there are
three spaces after 'retq'!
What happens is that instruction mnemonics are emitted into a buffer
instr_info::obuf, then instr_info::mnemonicendp is setup to point to
the '\0' character at the end of the mnemonic.
When we emit the whitespace, this is then added starting at the
mnemonicendp position. Lets consider 'retq', first the buffer is
setup like this:
'r' 'e' 't' 'q' '\0'
Then we add whitespace characters at the '\0', converting the buffer
to this:
'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
initially, the buffer is setup like this:
'x' 'c' 'h' 'g' '\0'
Then in NOP_Fixup we spot that we have an instruction that is an alias
for 'nop', and adjust the buffer to this:
'n' 'o' 'p' '\0' '\0'
The second '\0' is left over from the original buffer contents.
However, when we rewrite the buffer, we don't afjust mnemonicendp,
which still points at the second '\0' character.
Now, when we insert whitespace we get:
'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
Notice the whitespace is inserted after the first '\0', so, when we
print the buffer, the whitespace is not printed.
The fix for this is pretty easy, I can change NOP_Fixup to adjust
mnemonicendp, but now a bunch of tests start failing, we now produce
whitespace after the 'nop', which the tests don't expect.
So, I could update the tests to expect the whitespace....
...except I'm not a fan of trailing whitespace, so I'd really rather
not.
Turns out, I can pretty easily update the whitespace emitting code to
spot instructions that have zero operands and just not emit any
whitespace in this case. So this is what I've done.
I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
probably a good thing, though this is not really required any more.
I've then updated all the tests that I saw failing to adjust the
expected patterns to account for the change in whitespace.
[1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
2022-05-26 20:11:11 +08:00
|
|
|
+[a-f0-9]+: f3 0f 1e fa endbr64
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: 68 00 00 00 00 push \$0x0
|
2021-01-07 22:42:00 +08:00
|
|
|
+[a-f0-9]+: f2 e9 e1 ff ff ff bnd jmp 1f0 <.*>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 90 nop
|
opcodes/i386: remove trailing whitespace from insns with zero operands
While working on another patch[1] I had need to touch this code in
i386-dis.c:
ins->obufp = ins->mnemonicendp;
for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
oappend (ins, " ");
oappend (ins, " ");
(*ins->info->fprintf_styled_func)
(ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
What this code does is add whitespace after the instruction mnemonic
and before the instruction operands.
The problem I ran into when working on this code can be seen by
assembling this input file:
.text
nop
retq
Now, when I disassemble, here's the output. I've replaced trailing
whitespace with '_' so that the issue is clearer:
Disassembly of section .text:
0000000000000000 <.text>:
0: 90 nop
1: c3 retq___
Notice that there's no trailing whitespace after 'nop', but there are
three spaces after 'retq'!
What happens is that instruction mnemonics are emitted into a buffer
instr_info::obuf, then instr_info::mnemonicendp is setup to point to
the '\0' character at the end of the mnemonic.
When we emit the whitespace, this is then added starting at the
mnemonicendp position. Lets consider 'retq', first the buffer is
setup like this:
'r' 'e' 't' 'q' '\0'
Then we add whitespace characters at the '\0', converting the buffer
to this:
'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
initially, the buffer is setup like this:
'x' 'c' 'h' 'g' '\0'
Then in NOP_Fixup we spot that we have an instruction that is an alias
for 'nop', and adjust the buffer to this:
'n' 'o' 'p' '\0' '\0'
The second '\0' is left over from the original buffer contents.
However, when we rewrite the buffer, we don't afjust mnemonicendp,
which still points at the second '\0' character.
Now, when we insert whitespace we get:
'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
Notice the whitespace is inserted after the first '\0', so, when we
print the buffer, the whitespace is not printed.
The fix for this is pretty easy, I can change NOP_Fixup to adjust
mnemonicendp, but now a bunch of tests start failing, we now produce
whitespace after the 'nop', which the tests don't expect.
So, I could update the tests to expect the whitespace....
...except I'm not a fan of trailing whitespace, so I'd really rather
not.
Turns out, I can pretty easily update the whitespace emitting code to
spot instructions that have zero operands and just not emit any
whitespace in this case. So this is what I've done.
I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
probably a good thing, though this is not really required any more.
I've then updated all the tests that I saw failing to adjust the
expected patterns to account for the change in whitespace.
[1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
2022-05-26 20:11:11 +08:00
|
|
|
+[a-f0-9]+: f3 0f 1e fa endbr64
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: 68 01 00 00 00 push \$0x1
|
2021-01-07 22:42:00 +08:00
|
|
|
+[a-f0-9]+: f2 e9 d1 ff ff ff bnd jmp 1f0 <.*>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 90 nop
|
|
|
|
|
|
|
|
Disassembly of section .plt.sec:
|
|
|
|
|
Define various symbols conditionally in shared libraries
The values of symbols in shared libraries like _end, _edata, and
__bss_start are generally not that useful outside of the shared
library. This patch defines them conditionally with PROVIDE, since a
shared library might need the local value. An example is glibc ld.so
local access to "_begin", "_etext" and "_end". (ld.so gains access to
the local values by making the references using hidden visibility.
That makes the definitions hidden too.)
We can't use PROVIDE_HIDDEN in the linker scripts because the shared
library might need the value of the symbol in the executable. An
example is freebsd libc dynamic access to "_end".
PR ld/23161
* emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__,
and __end__ in shared libraries.
* emulparams/aarch64fbsd.sh: Likewise.
* emulparams/aarch64linux.sh: Likewise.
* emulparams/aarch64linux32.sh: Likewise.
* emulparams/armelf_fuchsia.sh: Likewise.
* emulparams/armelf_linux.sh: Likewise.
* emulparams/armelf_phoenix.sh: Likewise.
* emulparams/aarch64elf.sh: Likewise, and __data_start
* emulparams/aarch64elf32.sh: Likewise.
* emulparams/armelf.sh: Likewise.
* emulparams/armnto.sh: Likewise.
* emulparams/elf32bmip.sh: Remove duplicate ". = ." from
OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs.
* emulparams/elf32lriscv-defs.sh: Tidy.
* emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in
shared libs
* emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs.
* emulparams/elf32rl78.sh: Tidy.
* emulparams/i386nto.sh: PROVIDE _btext in shared libs.
* emulparams/shelf_nto.sh: Likewise.
* emulparams/shlelf_nto.sh: Likewise.
* emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__,
__bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in
shared libs.
* scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared
libraries. PROVIDE _edata, edata, __bss_start, and _end in shared
libraries.
* testsuite/ld-elf/pr23161.map,
* testsuite/ld-elf/pr23161a.c,
* testsuite/ld-elf/pr23161b.c,
* testsuite/ld-elf/pr23161c.c,
* testsuite/ld-elf/pr23161a.rd,
* testsuite/ld-elf/pr23161b.rd,
* testsuite/ld-elf/pr23161c.rd,
* testsuite/ld-elf/pr23161d.rd: New tests.
* testsuite/ld-elf/shared.exp: Run ld/23161 tests.
* testsuite/ld-elf/pr23162.rd,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-alpha/tlsbin.rd,
* testsuite/ld-alpha/tlsbin.sd,
* testsuite/ld-alpha/tlsbinr.rd,
* testsuite/ld-alpha/tlspic.rd,
* testsuite/ld-alpha/tlspic.sd,
* testsuite/ld-cris/dso-pltdis1.d,
* testsuite/ld-cris/dso-pltdis2.d,
* testsuite/ld-cris/dso12-pltdis.d,
* testsuite/ld-cris/gotplt1.d,
* testsuite/ld-cris/gotplt2.d,
* testsuite/ld-cris/gotplt3.d,
* testsuite/ld-cris/hiddef1.d,
* testsuite/ld-cris/libdso-1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-12.d,
* testsuite/ld-cris/libdso-12b.d,
* testsuite/ld-cris/libdso-12c.d,
* testsuite/ld-cris/libdso-13.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/libdso-15b.d,
* testsuite/ld-cris/libdso-1c.d,
* testsuite/ld-cris/libdso-1d.d,
* testsuite/ld-cris/libdso-2.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/pr16044.d,
* testsuite/ld-cris/pv32-1.d,
* testsuite/ld-cris/tls-dso-dtpoffd2.d,
* testsuite/ld-cris/tls-dso-dtpoffd4.d,
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-cris/tls-gd-1.d,
* testsuite/ld-cris/tls-gd-1h.d,
* testsuite/ld-cris/tls-gd-2.d,
* testsuite/ld-cris/tls-gd-2h.d,
* testsuite/ld-cris/tls-ie-10.d,
* testsuite/ld-cris/tls-ie-11.d,
* testsuite/ld-cris/tls-ie-78.d,
* testsuite/ld-cris/tls-ie-8.d,
* testsuite/ld-cris/tls-ie-9.d,
* testsuite/ld-cris/tls-js1.d,
* testsuite/ld-cris/tls-ld-4.d,
* testsuite/ld-cris/tls-ld-5.d,
* testsuite/ld-cris/tls-ld-6.d,
* testsuite/ld-cris/tls-ld-7.d,
* testsuite/ld-cris/tls-ldgd-14.d,
* testsuite/ld-cris/tls-ldgd-15.d,
* testsuite/ld-cris/tls-ldgdex-14.d,
* testsuite/ld-cris/tls-ldgdex-15.d,
* testsuite/ld-cris/tls-ldgdx-14.d,
* testsuite/ld-cris/tls-ldgdx-15.d,
* testsuite/ld-cris/tls-legdx-16.d,
* testsuite/ld-cris/tls-legdx-17.d,
* testsuite/ld-cris/tls-local-54.d,
* testsuite/ld-cris/tls-local-60.d,
* testsuite/ld-cris/tls-local-61.d,
* testsuite/ld-cris/tls-local-63.d,
* testsuite/ld-cris/tls-local-64.d,
* testsuite/ld-cris/tls-ok-30.d,
* testsuite/ld-cris/tls-ok-32.d,
* testsuite/ld-cris/tls-ok-34.d,
* testsuite/ld-cris/tls-und-38.d,
* testsuite/ld-cris/tls-und-42.d,
* testsuite/ld-cris/tls-und-46.d,
* testsuite/ld-cris/tls-und-50.d,
* testsuite/ld-cris/weakhiddso.d,
* testsuite/ld-cris/weakref2.d,
* testsuite/ld-frv/fdpic-shared-1.d,
* testsuite/ld-frv/fdpic-shared-2.d,
* testsuite/ld-frv/fdpic-shared-3.d,
* testsuite/ld-frv/fdpic-shared-4.d,
* testsuite/ld-frv/fdpic-shared-5.d,
* testsuite/ld-frv/fdpic-shared-7.d,
* testsuite/ld-frv/fdpic-shared-8.d,
* testsuite/ld-frv/tls-dynamic-2.d,
* testsuite/ld-i386/ibt-plt-1.d,
* testsuite/ld-i386/ibt-plt-2a.d,
* testsuite/ld-i386/ibt-plt-2b.d,
* testsuite/ld-i386/ibt-plt-2c.d,
* testsuite/ld-i386/ibt-plt-2d.d,
* testsuite/ld-i386/ibt-plt-3a.d,
* testsuite/ld-i386/ibt-plt-3b.d,
* testsuite/ld-i386/ibt-plt-3c.d,
* testsuite/ld-i386/ibt-plt-3d.d,
* testsuite/ld-i386/plt2.dd,
* testsuite/ld-i386/pr20830.d,
* testsuite/ld-i386/tlsbin-nacl.rd,
* testsuite/ld-i386/tlsbin.rd,
* testsuite/ld-i386/tlsbin2-nacl.rd,
* testsuite/ld-i386/tlsbin2.rd,
* testsuite/ld-i386/tlsbindesc-nacl.rd,
* testsuite/ld-i386/tlsbindesc.rd,
* testsuite/ld-i386/tlsdesc-nacl.rd,
* testsuite/ld-i386/tlsdesc.rd,
* testsuite/ld-i386/tlsgdesc-nacl.rd,
* testsuite/ld-i386/tlsgdesc.rd,
* testsuite/ld-i386/tlsnopic-nacl.rd,
* testsuite/ld-i386/tlsnopic.dd,
* testsuite/ld-i386/tlsnopic.rd,
* testsuite/ld-i386/tlsnopic.sd,
* testsuite/ld-i386/tlspic-nacl.rd,
* testsuite/ld-i386/tlspic.rd,
* testsuite/ld-i386/tlspic2-nacl.rd,
* testsuite/ld-i386/tlspic2.rd,
* testsuite/ld-ia64/merge1.d,
* testsuite/ld-ia64/merge2.d,
* testsuite/ld-ia64/merge3.d,
* testsuite/ld-ia64/merge4.d,
* testsuite/ld-ia64/merge5.d,
* testsuite/ld-ia64/tlsbin.rd,
* testsuite/ld-ia64/tlspic.rd,
* testsuite/ld-ifunc/ifunc-2-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64.d,
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-x86-64.d,
* testsuite/ld-ifunc/pr17154-i386-now.d,
* testsuite/ld-ifunc/pr17154-i386.d,
* testsuite/ld-ifunc/pr17154-x86-64-now.d,
* testsuite/ld-ifunc/pr17154-x86-64.d,
* testsuite/ld-m68k/tls-def-1.d,
* testsuite/ld-m68k/tls-gd-1.d2,
* testsuite/ld-metag/shared.d,
* testsuite/ld-metag/stub_pic_app.d,
* testsuite/ld-mips-elf/rel32-n32.d,
* testsuite/ld-mips-elf/rel32-o32.d,
* testsuite/ld-mips-elf/rel64.d,
* testsuite/ld-powerpc/ambiguousv1.d,
* testsuite/ld-powerpc/ambiguousv1b.d,
* testsuite/ld-powerpc/ambiguousv2.d,
* testsuite/ld-powerpc/ambiguousv2b.d,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlsso.r,
* testsuite/ld-powerpc/tlsso32.g,
* testsuite/ld-powerpc/tlsso32.r,
* testsuite/ld-powerpc/tlstocso.d,
* testsuite/ld-powerpc/tlstocso.g,
* testsuite/ld-powerpc/tlstocso.r,
* testsuite/ld-s390/gotreloc_31-1.dd,
* testsuite/ld-s390/tlsbin.dd,
* testsuite/ld-s390/tlsbin.rd,
* testsuite/ld-s390/tlsbin_64.dd,
* testsuite/ld-s390/tlsbin_64.rd,
* testsuite/ld-s390/tlspic.rd,
* testsuite/ld-s390/tlspic_64.rd,
* testsuite/ld-sh/tlsbin-2.d,
* testsuite/ld-sh/tlspic-2.d,
* testsuite/ld-sparc/gotop32.rd,
* testsuite/ld-sparc/gotop64.rd,
* testsuite/ld-sparc/tlssunbin32.rd,
* testsuite/ld-sparc/tlssunbin64.rd,
* testsuite/ld-sparc/tlssunnopic32.rd,
* testsuite/ld-sparc/tlssunnopic64.rd,
* testsuite/ld-sparc/tlssunpic32.rd,
* testsuite/ld-sparc/tlssunpic64.rd,
* testsuite/ld-x86-64/bnd-branch-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2.d,
* testsuite/ld-x86-64/bnd-plt-1-now.d,
* testsuite/ld-x86-64/bnd-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-1-x32.d,
* testsuite/ld-x86-64/ibt-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-2a-x32.d,
* testsuite/ld-x86-64/ibt-plt-2a.d,
* testsuite/ld-x86-64/ibt-plt-2b-x32.d,
* testsuite/ld-x86-64/ibt-plt-2b.d,
* testsuite/ld-x86-64/ibt-plt-2c-x32.d,
* testsuite/ld-x86-64/ibt-plt-2c.d,
* testsuite/ld-x86-64/ibt-plt-2d-x32.d,
* testsuite/ld-x86-64/ibt-plt-2d.d,
* testsuite/ld-x86-64/ibt-plt-3a-x32.d,
* testsuite/ld-x86-64/ibt-plt-3a.d,
* testsuite/ld-x86-64/ibt-plt-3b-x32.d,
* testsuite/ld-x86-64/ibt-plt-3b.d,
* testsuite/ld-x86-64/ibt-plt-3c-x32.d,
* testsuite/ld-x86-64/ibt-plt-3c.d,
* testsuite/ld-x86-64/ibt-plt-3d-x32.d,
* testsuite/ld-x86-64/ibt-plt-3d.d,
* testsuite/ld-x86-64/ilp32-4-nacl.d,
* testsuite/ld-x86-64/ilp32-4.d,
* testsuite/ld-x86-64/load1c-nacl.d,
* testsuite/ld-x86-64/load1c.d,
* testsuite/ld-x86-64/load1d-nacl.d,
* testsuite/ld-x86-64/load1d.d,
* testsuite/ld-x86-64/mpx3n.dd,
* testsuite/ld-x86-64/mpx4.dd,
* testsuite/ld-x86-64/mpx4n.dd,
* testsuite/ld-x86-64/plt2.dd,
* testsuite/ld-x86-64/pr14207.d,
* testsuite/ld-x86-64/pr19162.d,
* testsuite/ld-x86-64/pr20253-1f.d,
* testsuite/ld-x86-64/pr20253-1l.d,
* testsuite/ld-x86-64/pr20830a-now.d,
* testsuite/ld-x86-64/pr20830a.d,
* testsuite/ld-x86-64/pr20830b-now.d,
* testsuite/ld-x86-64/pr20830b.d,
* testsuite/ld-x86-64/pr21038a-now.d,
* testsuite/ld-x86-64/pr21038a.d,
* testsuite/ld-x86-64/pr21038b-now.d,
* testsuite/ld-x86-64/pr21038b.d,
* testsuite/ld-x86-64/pr21038c-now.d,
* testsuite/ld-x86-64/pr21038c.d,
* testsuite/ld-x86-64/tlsbin-nacl.rd,
* testsuite/ld-x86-64/tlsbin.rd,
* testsuite/ld-x86-64/tlsbin2-nacl.rd,
* testsuite/ld-x86-64/tlsbin2.rd,
* testsuite/ld-x86-64/tlsbindesc-nacl.rd,
* testsuite/ld-x86-64/tlsbindesc.rd,
* testsuite/ld-x86-64/tlsdesc-nacl.rd,
* testsuite/ld-x86-64/tlsdesc.rd,
* testsuite/ld-x86-64/tlsgdesc-nacl.rd,
* testsuite/ld-x86-64/tlsgdesc.rd,
* testsuite/ld-x86-64/tlspic-nacl.rd,
* testsuite/ld-x86-64/tlspic.rd,
* testsuite/ld-x86-64/tlspic2-nacl.rd,
* testsuite/ld-x86-64/tlspic2.rd: Update.
2018-06-08 18:47:34 +08:00
|
|
|
0+220 <bar1@plt>:
|
opcodes/i386: remove trailing whitespace from insns with zero operands
While working on another patch[1] I had need to touch this code in
i386-dis.c:
ins->obufp = ins->mnemonicendp;
for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
oappend (ins, " ");
oappend (ins, " ");
(*ins->info->fprintf_styled_func)
(ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
What this code does is add whitespace after the instruction mnemonic
and before the instruction operands.
The problem I ran into when working on this code can be seen by
assembling this input file:
.text
nop
retq
Now, when I disassemble, here's the output. I've replaced trailing
whitespace with '_' so that the issue is clearer:
Disassembly of section .text:
0000000000000000 <.text>:
0: 90 nop
1: c3 retq___
Notice that there's no trailing whitespace after 'nop', but there are
three spaces after 'retq'!
What happens is that instruction mnemonics are emitted into a buffer
instr_info::obuf, then instr_info::mnemonicendp is setup to point to
the '\0' character at the end of the mnemonic.
When we emit the whitespace, this is then added starting at the
mnemonicendp position. Lets consider 'retq', first the buffer is
setup like this:
'r' 'e' 't' 'q' '\0'
Then we add whitespace characters at the '\0', converting the buffer
to this:
'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
initially, the buffer is setup like this:
'x' 'c' 'h' 'g' '\0'
Then in NOP_Fixup we spot that we have an instruction that is an alias
for 'nop', and adjust the buffer to this:
'n' 'o' 'p' '\0' '\0'
The second '\0' is left over from the original buffer contents.
However, when we rewrite the buffer, we don't afjust mnemonicendp,
which still points at the second '\0' character.
Now, when we insert whitespace we get:
'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
Notice the whitespace is inserted after the first '\0', so, when we
print the buffer, the whitespace is not printed.
The fix for this is pretty easy, I can change NOP_Fixup to adjust
mnemonicendp, but now a bunch of tests start failing, we now produce
whitespace after the 'nop', which the tests don't expect.
So, I could update the tests to expect the whitespace....
...except I'm not a fan of trailing whitespace, so I'd really rather
not.
Turns out, I can pretty easily update the whitespace emitting code to
spot instructions that have zero operands and just not emit any
whitespace in this case. So this is what I've done.
I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
probably a good thing, though this is not really required any more.
I've then updated all the tests that I saw failing to adjust the
expected patterns to account for the change in whitespace.
[1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
2022-05-26 20:11:11 +08:00
|
|
|
+[a-f0-9]+: f3 0f 1e fa endbr64
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: f2 ff 25 a5 01 20 00 bnd jmp \*0x2001a5\(%rip\) # 2003d0 <bar1>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 0f 1f 44 00 00 nopl 0x0\(%rax,%rax,1\)
|
|
|
|
|
Define various symbols conditionally in shared libraries
The values of symbols in shared libraries like _end, _edata, and
__bss_start are generally not that useful outside of the shared
library. This patch defines them conditionally with PROVIDE, since a
shared library might need the local value. An example is glibc ld.so
local access to "_begin", "_etext" and "_end". (ld.so gains access to
the local values by making the references using hidden visibility.
That makes the definitions hidden too.)
We can't use PROVIDE_HIDDEN in the linker scripts because the shared
library might need the value of the symbol in the executable. An
example is freebsd libc dynamic access to "_end".
PR ld/23161
* emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__,
and __end__ in shared libraries.
* emulparams/aarch64fbsd.sh: Likewise.
* emulparams/aarch64linux.sh: Likewise.
* emulparams/aarch64linux32.sh: Likewise.
* emulparams/armelf_fuchsia.sh: Likewise.
* emulparams/armelf_linux.sh: Likewise.
* emulparams/armelf_phoenix.sh: Likewise.
* emulparams/aarch64elf.sh: Likewise, and __data_start
* emulparams/aarch64elf32.sh: Likewise.
* emulparams/armelf.sh: Likewise.
* emulparams/armnto.sh: Likewise.
* emulparams/elf32bmip.sh: Remove duplicate ". = ." from
OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs.
* emulparams/elf32lriscv-defs.sh: Tidy.
* emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in
shared libs
* emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs.
* emulparams/elf32rl78.sh: Tidy.
* emulparams/i386nto.sh: PROVIDE _btext in shared libs.
* emulparams/shelf_nto.sh: Likewise.
* emulparams/shlelf_nto.sh: Likewise.
* emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__,
__bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in
shared libs.
* scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared
libraries. PROVIDE _edata, edata, __bss_start, and _end in shared
libraries.
* testsuite/ld-elf/pr23161.map,
* testsuite/ld-elf/pr23161a.c,
* testsuite/ld-elf/pr23161b.c,
* testsuite/ld-elf/pr23161c.c,
* testsuite/ld-elf/pr23161a.rd,
* testsuite/ld-elf/pr23161b.rd,
* testsuite/ld-elf/pr23161c.rd,
* testsuite/ld-elf/pr23161d.rd: New tests.
* testsuite/ld-elf/shared.exp: Run ld/23161 tests.
* testsuite/ld-elf/pr23162.rd,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-alpha/tlsbin.rd,
* testsuite/ld-alpha/tlsbin.sd,
* testsuite/ld-alpha/tlsbinr.rd,
* testsuite/ld-alpha/tlspic.rd,
* testsuite/ld-alpha/tlspic.sd,
* testsuite/ld-cris/dso-pltdis1.d,
* testsuite/ld-cris/dso-pltdis2.d,
* testsuite/ld-cris/dso12-pltdis.d,
* testsuite/ld-cris/gotplt1.d,
* testsuite/ld-cris/gotplt2.d,
* testsuite/ld-cris/gotplt3.d,
* testsuite/ld-cris/hiddef1.d,
* testsuite/ld-cris/libdso-1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-12.d,
* testsuite/ld-cris/libdso-12b.d,
* testsuite/ld-cris/libdso-12c.d,
* testsuite/ld-cris/libdso-13.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/libdso-15b.d,
* testsuite/ld-cris/libdso-1c.d,
* testsuite/ld-cris/libdso-1d.d,
* testsuite/ld-cris/libdso-2.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/pr16044.d,
* testsuite/ld-cris/pv32-1.d,
* testsuite/ld-cris/tls-dso-dtpoffd2.d,
* testsuite/ld-cris/tls-dso-dtpoffd4.d,
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-cris/tls-gd-1.d,
* testsuite/ld-cris/tls-gd-1h.d,
* testsuite/ld-cris/tls-gd-2.d,
* testsuite/ld-cris/tls-gd-2h.d,
* testsuite/ld-cris/tls-ie-10.d,
* testsuite/ld-cris/tls-ie-11.d,
* testsuite/ld-cris/tls-ie-78.d,
* testsuite/ld-cris/tls-ie-8.d,
* testsuite/ld-cris/tls-ie-9.d,
* testsuite/ld-cris/tls-js1.d,
* testsuite/ld-cris/tls-ld-4.d,
* testsuite/ld-cris/tls-ld-5.d,
* testsuite/ld-cris/tls-ld-6.d,
* testsuite/ld-cris/tls-ld-7.d,
* testsuite/ld-cris/tls-ldgd-14.d,
* testsuite/ld-cris/tls-ldgd-15.d,
* testsuite/ld-cris/tls-ldgdex-14.d,
* testsuite/ld-cris/tls-ldgdex-15.d,
* testsuite/ld-cris/tls-ldgdx-14.d,
* testsuite/ld-cris/tls-ldgdx-15.d,
* testsuite/ld-cris/tls-legdx-16.d,
* testsuite/ld-cris/tls-legdx-17.d,
* testsuite/ld-cris/tls-local-54.d,
* testsuite/ld-cris/tls-local-60.d,
* testsuite/ld-cris/tls-local-61.d,
* testsuite/ld-cris/tls-local-63.d,
* testsuite/ld-cris/tls-local-64.d,
* testsuite/ld-cris/tls-ok-30.d,
* testsuite/ld-cris/tls-ok-32.d,
* testsuite/ld-cris/tls-ok-34.d,
* testsuite/ld-cris/tls-und-38.d,
* testsuite/ld-cris/tls-und-42.d,
* testsuite/ld-cris/tls-und-46.d,
* testsuite/ld-cris/tls-und-50.d,
* testsuite/ld-cris/weakhiddso.d,
* testsuite/ld-cris/weakref2.d,
* testsuite/ld-frv/fdpic-shared-1.d,
* testsuite/ld-frv/fdpic-shared-2.d,
* testsuite/ld-frv/fdpic-shared-3.d,
* testsuite/ld-frv/fdpic-shared-4.d,
* testsuite/ld-frv/fdpic-shared-5.d,
* testsuite/ld-frv/fdpic-shared-7.d,
* testsuite/ld-frv/fdpic-shared-8.d,
* testsuite/ld-frv/tls-dynamic-2.d,
* testsuite/ld-i386/ibt-plt-1.d,
* testsuite/ld-i386/ibt-plt-2a.d,
* testsuite/ld-i386/ibt-plt-2b.d,
* testsuite/ld-i386/ibt-plt-2c.d,
* testsuite/ld-i386/ibt-plt-2d.d,
* testsuite/ld-i386/ibt-plt-3a.d,
* testsuite/ld-i386/ibt-plt-3b.d,
* testsuite/ld-i386/ibt-plt-3c.d,
* testsuite/ld-i386/ibt-plt-3d.d,
* testsuite/ld-i386/plt2.dd,
* testsuite/ld-i386/pr20830.d,
* testsuite/ld-i386/tlsbin-nacl.rd,
* testsuite/ld-i386/tlsbin.rd,
* testsuite/ld-i386/tlsbin2-nacl.rd,
* testsuite/ld-i386/tlsbin2.rd,
* testsuite/ld-i386/tlsbindesc-nacl.rd,
* testsuite/ld-i386/tlsbindesc.rd,
* testsuite/ld-i386/tlsdesc-nacl.rd,
* testsuite/ld-i386/tlsdesc.rd,
* testsuite/ld-i386/tlsgdesc-nacl.rd,
* testsuite/ld-i386/tlsgdesc.rd,
* testsuite/ld-i386/tlsnopic-nacl.rd,
* testsuite/ld-i386/tlsnopic.dd,
* testsuite/ld-i386/tlsnopic.rd,
* testsuite/ld-i386/tlsnopic.sd,
* testsuite/ld-i386/tlspic-nacl.rd,
* testsuite/ld-i386/tlspic.rd,
* testsuite/ld-i386/tlspic2-nacl.rd,
* testsuite/ld-i386/tlspic2.rd,
* testsuite/ld-ia64/merge1.d,
* testsuite/ld-ia64/merge2.d,
* testsuite/ld-ia64/merge3.d,
* testsuite/ld-ia64/merge4.d,
* testsuite/ld-ia64/merge5.d,
* testsuite/ld-ia64/tlsbin.rd,
* testsuite/ld-ia64/tlspic.rd,
* testsuite/ld-ifunc/ifunc-2-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64.d,
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-x86-64.d,
* testsuite/ld-ifunc/pr17154-i386-now.d,
* testsuite/ld-ifunc/pr17154-i386.d,
* testsuite/ld-ifunc/pr17154-x86-64-now.d,
* testsuite/ld-ifunc/pr17154-x86-64.d,
* testsuite/ld-m68k/tls-def-1.d,
* testsuite/ld-m68k/tls-gd-1.d2,
* testsuite/ld-metag/shared.d,
* testsuite/ld-metag/stub_pic_app.d,
* testsuite/ld-mips-elf/rel32-n32.d,
* testsuite/ld-mips-elf/rel32-o32.d,
* testsuite/ld-mips-elf/rel64.d,
* testsuite/ld-powerpc/ambiguousv1.d,
* testsuite/ld-powerpc/ambiguousv1b.d,
* testsuite/ld-powerpc/ambiguousv2.d,
* testsuite/ld-powerpc/ambiguousv2b.d,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlsso.r,
* testsuite/ld-powerpc/tlsso32.g,
* testsuite/ld-powerpc/tlsso32.r,
* testsuite/ld-powerpc/tlstocso.d,
* testsuite/ld-powerpc/tlstocso.g,
* testsuite/ld-powerpc/tlstocso.r,
* testsuite/ld-s390/gotreloc_31-1.dd,
* testsuite/ld-s390/tlsbin.dd,
* testsuite/ld-s390/tlsbin.rd,
* testsuite/ld-s390/tlsbin_64.dd,
* testsuite/ld-s390/tlsbin_64.rd,
* testsuite/ld-s390/tlspic.rd,
* testsuite/ld-s390/tlspic_64.rd,
* testsuite/ld-sh/tlsbin-2.d,
* testsuite/ld-sh/tlspic-2.d,
* testsuite/ld-sparc/gotop32.rd,
* testsuite/ld-sparc/gotop64.rd,
* testsuite/ld-sparc/tlssunbin32.rd,
* testsuite/ld-sparc/tlssunbin64.rd,
* testsuite/ld-sparc/tlssunnopic32.rd,
* testsuite/ld-sparc/tlssunnopic64.rd,
* testsuite/ld-sparc/tlssunpic32.rd,
* testsuite/ld-sparc/tlssunpic64.rd,
* testsuite/ld-x86-64/bnd-branch-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2.d,
* testsuite/ld-x86-64/bnd-plt-1-now.d,
* testsuite/ld-x86-64/bnd-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-1-x32.d,
* testsuite/ld-x86-64/ibt-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-2a-x32.d,
* testsuite/ld-x86-64/ibt-plt-2a.d,
* testsuite/ld-x86-64/ibt-plt-2b-x32.d,
* testsuite/ld-x86-64/ibt-plt-2b.d,
* testsuite/ld-x86-64/ibt-plt-2c-x32.d,
* testsuite/ld-x86-64/ibt-plt-2c.d,
* testsuite/ld-x86-64/ibt-plt-2d-x32.d,
* testsuite/ld-x86-64/ibt-plt-2d.d,
* testsuite/ld-x86-64/ibt-plt-3a-x32.d,
* testsuite/ld-x86-64/ibt-plt-3a.d,
* testsuite/ld-x86-64/ibt-plt-3b-x32.d,
* testsuite/ld-x86-64/ibt-plt-3b.d,
* testsuite/ld-x86-64/ibt-plt-3c-x32.d,
* testsuite/ld-x86-64/ibt-plt-3c.d,
* testsuite/ld-x86-64/ibt-plt-3d-x32.d,
* testsuite/ld-x86-64/ibt-plt-3d.d,
* testsuite/ld-x86-64/ilp32-4-nacl.d,
* testsuite/ld-x86-64/ilp32-4.d,
* testsuite/ld-x86-64/load1c-nacl.d,
* testsuite/ld-x86-64/load1c.d,
* testsuite/ld-x86-64/load1d-nacl.d,
* testsuite/ld-x86-64/load1d.d,
* testsuite/ld-x86-64/mpx3n.dd,
* testsuite/ld-x86-64/mpx4.dd,
* testsuite/ld-x86-64/mpx4n.dd,
* testsuite/ld-x86-64/plt2.dd,
* testsuite/ld-x86-64/pr14207.d,
* testsuite/ld-x86-64/pr19162.d,
* testsuite/ld-x86-64/pr20253-1f.d,
* testsuite/ld-x86-64/pr20253-1l.d,
* testsuite/ld-x86-64/pr20830a-now.d,
* testsuite/ld-x86-64/pr20830a.d,
* testsuite/ld-x86-64/pr20830b-now.d,
* testsuite/ld-x86-64/pr20830b.d,
* testsuite/ld-x86-64/pr21038a-now.d,
* testsuite/ld-x86-64/pr21038a.d,
* testsuite/ld-x86-64/pr21038b-now.d,
* testsuite/ld-x86-64/pr21038b.d,
* testsuite/ld-x86-64/pr21038c-now.d,
* testsuite/ld-x86-64/pr21038c.d,
* testsuite/ld-x86-64/tlsbin-nacl.rd,
* testsuite/ld-x86-64/tlsbin.rd,
* testsuite/ld-x86-64/tlsbin2-nacl.rd,
* testsuite/ld-x86-64/tlsbin2.rd,
* testsuite/ld-x86-64/tlsbindesc-nacl.rd,
* testsuite/ld-x86-64/tlsbindesc.rd,
* testsuite/ld-x86-64/tlsdesc-nacl.rd,
* testsuite/ld-x86-64/tlsdesc.rd,
* testsuite/ld-x86-64/tlsgdesc-nacl.rd,
* testsuite/ld-x86-64/tlsgdesc.rd,
* testsuite/ld-x86-64/tlspic-nacl.rd,
* testsuite/ld-x86-64/tlspic.rd,
* testsuite/ld-x86-64/tlspic2-nacl.rd,
* testsuite/ld-x86-64/tlspic2.rd: Update.
2018-06-08 18:47:34 +08:00
|
|
|
0+230 <bar2@plt>:
|
opcodes/i386: remove trailing whitespace from insns with zero operands
While working on another patch[1] I had need to touch this code in
i386-dis.c:
ins->obufp = ins->mnemonicendp;
for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
oappend (ins, " ");
oappend (ins, " ");
(*ins->info->fprintf_styled_func)
(ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
What this code does is add whitespace after the instruction mnemonic
and before the instruction operands.
The problem I ran into when working on this code can be seen by
assembling this input file:
.text
nop
retq
Now, when I disassemble, here's the output. I've replaced trailing
whitespace with '_' so that the issue is clearer:
Disassembly of section .text:
0000000000000000 <.text>:
0: 90 nop
1: c3 retq___
Notice that there's no trailing whitespace after 'nop', but there are
three spaces after 'retq'!
What happens is that instruction mnemonics are emitted into a buffer
instr_info::obuf, then instr_info::mnemonicendp is setup to point to
the '\0' character at the end of the mnemonic.
When we emit the whitespace, this is then added starting at the
mnemonicendp position. Lets consider 'retq', first the buffer is
setup like this:
'r' 'e' 't' 'q' '\0'
Then we add whitespace characters at the '\0', converting the buffer
to this:
'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
initially, the buffer is setup like this:
'x' 'c' 'h' 'g' '\0'
Then in NOP_Fixup we spot that we have an instruction that is an alias
for 'nop', and adjust the buffer to this:
'n' 'o' 'p' '\0' '\0'
The second '\0' is left over from the original buffer contents.
However, when we rewrite the buffer, we don't afjust mnemonicendp,
which still points at the second '\0' character.
Now, when we insert whitespace we get:
'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
Notice the whitespace is inserted after the first '\0', so, when we
print the buffer, the whitespace is not printed.
The fix for this is pretty easy, I can change NOP_Fixup to adjust
mnemonicendp, but now a bunch of tests start failing, we now produce
whitespace after the 'nop', which the tests don't expect.
So, I could update the tests to expect the whitespace....
...except I'm not a fan of trailing whitespace, so I'd really rather
not.
Turns out, I can pretty easily update the whitespace emitting code to
spot instructions that have zero operands and just not emit any
whitespace in this case. So this is what I've done.
I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
probably a good thing, though this is not really required any more.
I've then updated all the tests that I saw failing to adjust the
expected patterns to account for the change in whitespace.
[1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
2022-05-26 20:11:11 +08:00
|
|
|
+[a-f0-9]+: f3 0f 1e fa endbr64
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: f2 ff 25 9d 01 20 00 bnd jmp \*0x20019d\(%rip\) # 2003d8 <bar2>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 0f 1f 44 00 00 nopl 0x0\(%rax,%rax,1\)
|
|
|
|
|
|
|
|
Disassembly of section .text:
|
|
|
|
|
Define various symbols conditionally in shared libraries
The values of symbols in shared libraries like _end, _edata, and
__bss_start are generally not that useful outside of the shared
library. This patch defines them conditionally with PROVIDE, since a
shared library might need the local value. An example is glibc ld.so
local access to "_begin", "_etext" and "_end". (ld.so gains access to
the local values by making the references using hidden visibility.
That makes the definitions hidden too.)
We can't use PROVIDE_HIDDEN in the linker scripts because the shared
library might need the value of the symbol in the executable. An
example is freebsd libc dynamic access to "_end".
PR ld/23161
* emulparams/aarch64cloudabi.sh: PROVIDE __bss_start__, _bss_end__,
and __end__ in shared libraries.
* emulparams/aarch64fbsd.sh: Likewise.
* emulparams/aarch64linux.sh: Likewise.
* emulparams/aarch64linux32.sh: Likewise.
* emulparams/armelf_fuchsia.sh: Likewise.
* emulparams/armelf_linux.sh: Likewise.
* emulparams/armelf_phoenix.sh: Likewise.
* emulparams/aarch64elf.sh: Likewise, and __data_start
* emulparams/aarch64elf32.sh: Likewise.
* emulparams/armelf.sh: Likewise.
* emulparams/armnto.sh: Likewise.
* emulparams/elf32bmip.sh: Remove duplicate ". = ." from
OTHER_GOT_SYMBOLS. PROVIDE _ftext, _fdata, and _fbss in shared libs.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32frv.sh: PROVIDE __end and __data_start in shared libs.
* emulparams/elf32lriscv-defs.sh: Tidy.
* emulparams/elf32mcore.sh: PROVIDE __bss_start and _bss_end in
shared libs
* emulparams/elf32ppccommon.sh: PROVIDE __end in shared libs.
* emulparams/elf32rl78.sh: Tidy.
* emulparams/i386nto.sh: PROVIDE _btext in shared libs.
* emulparams/shelf_nto.sh: Likewise.
* emulparams/shlelf_nto.sh: Likewise.
* emulparams/score3_elf.sh: PROVIDE _gp, _bss_start__, _bss_end__,
__bss_end__, __end__, _fdata, _sdata_begin, and _bss_start in
shared libs.
* scripttempl/elf.sc: Don't use EXECUTABLE_SYMBOLS for shared
libraries. PROVIDE _edata, edata, __bss_start, and _end in shared
libraries.
* testsuite/ld-elf/pr23161.map,
* testsuite/ld-elf/pr23161a.c,
* testsuite/ld-elf/pr23161b.c,
* testsuite/ld-elf/pr23161c.c,
* testsuite/ld-elf/pr23161a.rd,
* testsuite/ld-elf/pr23161b.rd,
* testsuite/ld-elf/pr23161c.rd,
* testsuite/ld-elf/pr23161d.rd: New tests.
* testsuite/ld-elf/shared.exp: Run ld/23161 tests.
* testsuite/ld-elf/pr23162.rd,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-alpha/tlsbin.rd,
* testsuite/ld-alpha/tlsbin.sd,
* testsuite/ld-alpha/tlsbinr.rd,
* testsuite/ld-alpha/tlspic.rd,
* testsuite/ld-alpha/tlspic.sd,
* testsuite/ld-cris/dso-pltdis1.d,
* testsuite/ld-cris/dso-pltdis2.d,
* testsuite/ld-cris/dso12-pltdis.d,
* testsuite/ld-cris/gotplt1.d,
* testsuite/ld-cris/gotplt2.d,
* testsuite/ld-cris/gotplt3.d,
* testsuite/ld-cris/hiddef1.d,
* testsuite/ld-cris/libdso-1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-12.d,
* testsuite/ld-cris/libdso-12b.d,
* testsuite/ld-cris/libdso-12c.d,
* testsuite/ld-cris/libdso-13.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/libdso-15b.d,
* testsuite/ld-cris/libdso-1c.d,
* testsuite/ld-cris/libdso-1d.d,
* testsuite/ld-cris/libdso-2.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/pr16044.d,
* testsuite/ld-cris/pv32-1.d,
* testsuite/ld-cris/tls-dso-dtpoffd2.d,
* testsuite/ld-cris/tls-dso-dtpoffd4.d,
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-cris/tls-gd-1.d,
* testsuite/ld-cris/tls-gd-1h.d,
* testsuite/ld-cris/tls-gd-2.d,
* testsuite/ld-cris/tls-gd-2h.d,
* testsuite/ld-cris/tls-ie-10.d,
* testsuite/ld-cris/tls-ie-11.d,
* testsuite/ld-cris/tls-ie-78.d,
* testsuite/ld-cris/tls-ie-8.d,
* testsuite/ld-cris/tls-ie-9.d,
* testsuite/ld-cris/tls-js1.d,
* testsuite/ld-cris/tls-ld-4.d,
* testsuite/ld-cris/tls-ld-5.d,
* testsuite/ld-cris/tls-ld-6.d,
* testsuite/ld-cris/tls-ld-7.d,
* testsuite/ld-cris/tls-ldgd-14.d,
* testsuite/ld-cris/tls-ldgd-15.d,
* testsuite/ld-cris/tls-ldgdex-14.d,
* testsuite/ld-cris/tls-ldgdex-15.d,
* testsuite/ld-cris/tls-ldgdx-14.d,
* testsuite/ld-cris/tls-ldgdx-15.d,
* testsuite/ld-cris/tls-legdx-16.d,
* testsuite/ld-cris/tls-legdx-17.d,
* testsuite/ld-cris/tls-local-54.d,
* testsuite/ld-cris/tls-local-60.d,
* testsuite/ld-cris/tls-local-61.d,
* testsuite/ld-cris/tls-local-63.d,
* testsuite/ld-cris/tls-local-64.d,
* testsuite/ld-cris/tls-ok-30.d,
* testsuite/ld-cris/tls-ok-32.d,
* testsuite/ld-cris/tls-ok-34.d,
* testsuite/ld-cris/tls-und-38.d,
* testsuite/ld-cris/tls-und-42.d,
* testsuite/ld-cris/tls-und-46.d,
* testsuite/ld-cris/tls-und-50.d,
* testsuite/ld-cris/weakhiddso.d,
* testsuite/ld-cris/weakref2.d,
* testsuite/ld-frv/fdpic-shared-1.d,
* testsuite/ld-frv/fdpic-shared-2.d,
* testsuite/ld-frv/fdpic-shared-3.d,
* testsuite/ld-frv/fdpic-shared-4.d,
* testsuite/ld-frv/fdpic-shared-5.d,
* testsuite/ld-frv/fdpic-shared-7.d,
* testsuite/ld-frv/fdpic-shared-8.d,
* testsuite/ld-frv/tls-dynamic-2.d,
* testsuite/ld-i386/ibt-plt-1.d,
* testsuite/ld-i386/ibt-plt-2a.d,
* testsuite/ld-i386/ibt-plt-2b.d,
* testsuite/ld-i386/ibt-plt-2c.d,
* testsuite/ld-i386/ibt-plt-2d.d,
* testsuite/ld-i386/ibt-plt-3a.d,
* testsuite/ld-i386/ibt-plt-3b.d,
* testsuite/ld-i386/ibt-plt-3c.d,
* testsuite/ld-i386/ibt-plt-3d.d,
* testsuite/ld-i386/plt2.dd,
* testsuite/ld-i386/pr20830.d,
* testsuite/ld-i386/tlsbin-nacl.rd,
* testsuite/ld-i386/tlsbin.rd,
* testsuite/ld-i386/tlsbin2-nacl.rd,
* testsuite/ld-i386/tlsbin2.rd,
* testsuite/ld-i386/tlsbindesc-nacl.rd,
* testsuite/ld-i386/tlsbindesc.rd,
* testsuite/ld-i386/tlsdesc-nacl.rd,
* testsuite/ld-i386/tlsdesc.rd,
* testsuite/ld-i386/tlsgdesc-nacl.rd,
* testsuite/ld-i386/tlsgdesc.rd,
* testsuite/ld-i386/tlsnopic-nacl.rd,
* testsuite/ld-i386/tlsnopic.dd,
* testsuite/ld-i386/tlsnopic.rd,
* testsuite/ld-i386/tlsnopic.sd,
* testsuite/ld-i386/tlspic-nacl.rd,
* testsuite/ld-i386/tlspic.rd,
* testsuite/ld-i386/tlspic2-nacl.rd,
* testsuite/ld-i386/tlspic2.rd,
* testsuite/ld-ia64/merge1.d,
* testsuite/ld-ia64/merge2.d,
* testsuite/ld-ia64/merge3.d,
* testsuite/ld-ia64/merge4.d,
* testsuite/ld-ia64/merge5.d,
* testsuite/ld-ia64/tlsbin.rd,
* testsuite/ld-ia64/tlspic.rd,
* testsuite/ld-ifunc/ifunc-2-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-local-x86-64.d,
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d,
* testsuite/ld-ifunc/ifunc-2-x86-64.d,
* testsuite/ld-ifunc/pr17154-i386-now.d,
* testsuite/ld-ifunc/pr17154-i386.d,
* testsuite/ld-ifunc/pr17154-x86-64-now.d,
* testsuite/ld-ifunc/pr17154-x86-64.d,
* testsuite/ld-m68k/tls-def-1.d,
* testsuite/ld-m68k/tls-gd-1.d2,
* testsuite/ld-metag/shared.d,
* testsuite/ld-metag/stub_pic_app.d,
* testsuite/ld-mips-elf/rel32-n32.d,
* testsuite/ld-mips-elf/rel32-o32.d,
* testsuite/ld-mips-elf/rel64.d,
* testsuite/ld-powerpc/ambiguousv1.d,
* testsuite/ld-powerpc/ambiguousv1b.d,
* testsuite/ld-powerpc/ambiguousv2.d,
* testsuite/ld-powerpc/ambiguousv2b.d,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlsso.r,
* testsuite/ld-powerpc/tlsso32.g,
* testsuite/ld-powerpc/tlsso32.r,
* testsuite/ld-powerpc/tlstocso.d,
* testsuite/ld-powerpc/tlstocso.g,
* testsuite/ld-powerpc/tlstocso.r,
* testsuite/ld-s390/gotreloc_31-1.dd,
* testsuite/ld-s390/tlsbin.dd,
* testsuite/ld-s390/tlsbin.rd,
* testsuite/ld-s390/tlsbin_64.dd,
* testsuite/ld-s390/tlsbin_64.rd,
* testsuite/ld-s390/tlspic.rd,
* testsuite/ld-s390/tlspic_64.rd,
* testsuite/ld-sh/tlsbin-2.d,
* testsuite/ld-sh/tlspic-2.d,
* testsuite/ld-sparc/gotop32.rd,
* testsuite/ld-sparc/gotop64.rd,
* testsuite/ld-sparc/tlssunbin32.rd,
* testsuite/ld-sparc/tlssunbin64.rd,
* testsuite/ld-sparc/tlssunnopic32.rd,
* testsuite/ld-sparc/tlssunnopic64.rd,
* testsuite/ld-sparc/tlssunpic32.rd,
* testsuite/ld-sparc/tlssunpic64.rd,
* testsuite/ld-x86-64/bnd-branch-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-1-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2-now.d,
* testsuite/ld-x86-64/bnd-ifunc-2.d,
* testsuite/ld-x86-64/bnd-plt-1-now.d,
* testsuite/ld-x86-64/bnd-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-1-x32.d,
* testsuite/ld-x86-64/ibt-plt-1.d,
* testsuite/ld-x86-64/ibt-plt-2a-x32.d,
* testsuite/ld-x86-64/ibt-plt-2a.d,
* testsuite/ld-x86-64/ibt-plt-2b-x32.d,
* testsuite/ld-x86-64/ibt-plt-2b.d,
* testsuite/ld-x86-64/ibt-plt-2c-x32.d,
* testsuite/ld-x86-64/ibt-plt-2c.d,
* testsuite/ld-x86-64/ibt-plt-2d-x32.d,
* testsuite/ld-x86-64/ibt-plt-2d.d,
* testsuite/ld-x86-64/ibt-plt-3a-x32.d,
* testsuite/ld-x86-64/ibt-plt-3a.d,
* testsuite/ld-x86-64/ibt-plt-3b-x32.d,
* testsuite/ld-x86-64/ibt-plt-3b.d,
* testsuite/ld-x86-64/ibt-plt-3c-x32.d,
* testsuite/ld-x86-64/ibt-plt-3c.d,
* testsuite/ld-x86-64/ibt-plt-3d-x32.d,
* testsuite/ld-x86-64/ibt-plt-3d.d,
* testsuite/ld-x86-64/ilp32-4-nacl.d,
* testsuite/ld-x86-64/ilp32-4.d,
* testsuite/ld-x86-64/load1c-nacl.d,
* testsuite/ld-x86-64/load1c.d,
* testsuite/ld-x86-64/load1d-nacl.d,
* testsuite/ld-x86-64/load1d.d,
* testsuite/ld-x86-64/mpx3n.dd,
* testsuite/ld-x86-64/mpx4.dd,
* testsuite/ld-x86-64/mpx4n.dd,
* testsuite/ld-x86-64/plt2.dd,
* testsuite/ld-x86-64/pr14207.d,
* testsuite/ld-x86-64/pr19162.d,
* testsuite/ld-x86-64/pr20253-1f.d,
* testsuite/ld-x86-64/pr20253-1l.d,
* testsuite/ld-x86-64/pr20830a-now.d,
* testsuite/ld-x86-64/pr20830a.d,
* testsuite/ld-x86-64/pr20830b-now.d,
* testsuite/ld-x86-64/pr20830b.d,
* testsuite/ld-x86-64/pr21038a-now.d,
* testsuite/ld-x86-64/pr21038a.d,
* testsuite/ld-x86-64/pr21038b-now.d,
* testsuite/ld-x86-64/pr21038b.d,
* testsuite/ld-x86-64/pr21038c-now.d,
* testsuite/ld-x86-64/pr21038c.d,
* testsuite/ld-x86-64/tlsbin-nacl.rd,
* testsuite/ld-x86-64/tlsbin.rd,
* testsuite/ld-x86-64/tlsbin2-nacl.rd,
* testsuite/ld-x86-64/tlsbin2.rd,
* testsuite/ld-x86-64/tlsbindesc-nacl.rd,
* testsuite/ld-x86-64/tlsbindesc.rd,
* testsuite/ld-x86-64/tlsdesc-nacl.rd,
* testsuite/ld-x86-64/tlsdesc.rd,
* testsuite/ld-x86-64/tlsgdesc-nacl.rd,
* testsuite/ld-x86-64/tlsgdesc.rd,
* testsuite/ld-x86-64/tlspic-nacl.rd,
* testsuite/ld-x86-64/tlspic.rd,
* testsuite/ld-x86-64/tlspic2-nacl.rd,
* testsuite/ld-x86-64/tlspic2.rd: Update.
2018-06-08 18:47:34 +08:00
|
|
|
0+240 <foo>:
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 48 83 ec 08 sub \$0x8,%rsp
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: e8 e7 ff ff ff call 230 <bar2@plt>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
+[a-f0-9]+: 48 83 c4 08 add \$0x8,%rsp
|
2020-07-15 14:53:55 +08:00
|
|
|
+[a-f0-9]+: e9 ce ff ff ff jmp 220 <bar1@plt>
|
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
|
|
|
#pass
|