gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
/* Definitions for inline frame support.
|
|
|
|
|
|
2020-01-01 14:20:01 +08:00
|
|
|
Copyright (C) 2008-2020 Free Software Foundation, Inc.
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
|
|
#if !defined (INLINE_FRAME_H)
|
|
|
|
|
#define INLINE_FRAME_H 1
|
|
|
|
|
|
|
|
|
|
struct frame_info;
|
|
|
|
|
struct frame_unwind;
|
Don't elide all inlined frames
This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective. This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.
Using the test case from breakpoints/17534,
3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5 volatile int y;
6 y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11 __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16 x= 42;
17
18 if (x)
19 NVIC_EnableIRQ(16);
20 else
21 NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534
Breakpoint 1, main () at 17534.c:19
19 NVIC_EnableIRQ(16);
Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller. This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain. The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint). If we have, we do not elide the frame.
With this patch, GDB now reports that the inferior has stopped inside the
inlined function:
(gdb) r
Starting program: 17534
Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6 y = IRQn;
Many thanks to Jan and Pedro for guidance on this.
gdb/ChangeLog:
* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.
gdb/testsuite/ChangeLog:
* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3. Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.
2018-05-18 03:15:11 +08:00
|
|
|
struct bpstats;
|
Multi-target support
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
2020-01-11 04:06:08 +08:00
|
|
|
struct process_stratum_target;
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* The inline frame unwinder. */
|
|
|
|
|
|
2010-08-11 21:24:32 +08:00
|
|
|
extern const struct frame_unwind inline_frame_unwind;
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* Skip all inlined functions whose call sites are at the current PC.
|
|
|
|
|
|
Don't elide all inlined frames
This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective. This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.
Using the test case from breakpoints/17534,
3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5 volatile int y;
6 y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11 __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16 x= 42;
17
18 if (x)
19 NVIC_EnableIRQ(16);
20 else
21 NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534
Breakpoint 1, main () at 17534.c:19
19 NVIC_EnableIRQ(16);
Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller. This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain. The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint). If we have, we do not elide the frame.
With this patch, GDB now reports that the inferior has stopped inside the
inlined function:
(gdb) r
Starting program: 17534
Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6 y = IRQn;
Many thanks to Jan and Pedro for guidance on this.
gdb/ChangeLog:
* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.
gdb/testsuite/ChangeLog:
* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3. Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.
2018-05-18 03:15:11 +08:00
|
|
|
If non-NULL, STOP_CHAIN is used to determine whether a stop was caused by
|
|
|
|
|
a user breakpoint. In that case, do not skip that inlined frame. This
|
|
|
|
|
allows the inlined frame to be treated as if it were non-inlined from the
|
|
|
|
|
user's perspective. GDB will stop "in" the inlined frame instead of
|
|
|
|
|
the caller. */
|
|
|
|
|
|
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
2018-06-22 00:09:31 +08:00
|
|
|
void skip_inline_frames (thread_info *thread, struct bpstats *stop_chain);
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* Forget about any hidden inlined functions in PTID, which is new or
|
Multi-target support
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
2020-01-11 04:06:08 +08:00
|
|
|
about to be resumed. PTID may be minus_one_ptid (all processes of
|
|
|
|
|
TARGET) or a PID (all threads in this process of TARGET). */
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
Multi-target support
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
2020-01-11 04:06:08 +08:00
|
|
|
void clear_inline_frame_state (process_stratum_target *target, ptid_t ptid);
|
|
|
|
|
|
|
|
|
|
/* Forget about any hidden inlined functions in THREAD, which is new
|
|
|
|
|
or about to be resumed. */
|
|
|
|
|
|
|
|
|
|
void clear_inline_frame_state (thread_info *thread);
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* Step into an inlined function by unhiding it. */
|
|
|
|
|
|
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
2018-06-22 00:09:31 +08:00
|
|
|
void step_into_inline_frame (thread_info *thread);
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* Return the number of hidden functions inlined into the current
|
|
|
|
|
frame. */
|
|
|
|
|
|
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
2018-06-22 00:09:31 +08:00
|
|
|
int inline_skipped_frames (thread_info *thread);
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* If one or more inlined functions are hidden, return the symbol for
|
|
|
|
|
the function inlined into the current frame. */
|
|
|
|
|
|
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
2018-06-22 00:09:31 +08:00
|
|
|
struct symbol *inline_skipped_symbol (thread_info *thread);
|
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 08:20:24 +08:00
|
|
|
|
|
|
|
|
/* Return the number of functions inlined into THIS_FRAME. Some of
|
|
|
|
|
the callees may not have associated frames (see
|
|
|
|
|
skip_inline_frames). */
|
|
|
|
|
|
|
|
|
|
int frame_inlined_callees (struct frame_info *this_frame);
|
|
|
|
|
|
|
|
|
|
#endif /* !defined (INLINE_FRAME_H) */
|
