binutils-gdb/ld/testsuite/ld-x86-64/ibt-plt-3c.d

44 lines
1.6 KiB
D
Raw Normal View History

x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
#source: ibt-plt-3.s
#as: --64 -defsym __64_bit__=1
x86-64: Add -z max-page-size=0x200000 -z noseparate-code to linker tests Add -z max-page-size=0x200000 -z noseparate-code since these tests check for exact addresses. * testsuite/ld-x86-64/bnd-branch-1-now.d: Add -z max-page-size=0x200000 -z noseparate-code. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr17618.d: Likewise. * testsuite/ld-x86-64/pr19162.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise.
2018-02-17 02:02:00 +08:00
#ld: -shared -m elf_x86_64 -z ibt --hash-style=sysv -z max-page-size=0x200000 -z noseparate-code
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
#objdump: -dw
.*: +file format .*
Disassembly of section .plt:
elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-14 20:55:08 +08:00
[a-f0-9]+ <.plt>:
+[a-f0-9]+: ff 35 ([0-9a-f]{2} ){4}[ ]+push 0x[a-f0-9]+\(%rip\) # [a-f0-9]+ <_GLOBAL_OFFSET_TABLE_\+0x8>
+[a-f0-9]+: f2 ff 25 ([0-9a-f]{2} ){4}[ ]+bnd jmp \*0x[a-f0-9]+\(%rip\) # [a-f0-9]+ <_GLOBAL_OFFSET_TABLE_\+0x10>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 0f 1f 00 nopl \(%rax\)
+[a-f0-9]+: f3 0f 1e fa endbr64
+[a-f0-9]+: 68 00 00 00 00 push \$0x0
ELF: Don't generate unused section symbols For ELF targets, section symbols are required only for relocations. With -ffunction-sections -fdata-sections, there can be many unused section symbols. Sizes of libstdc++.a on Linux/x86-64 in GCC 11 are With unused section symbols : 39411698 bytes Without unused section symbols: 39227002 bytes The unused section symbols in libstdc++.a occupy more than 180 KB. Add BSF_SECTION_SYM_USED to indicate if a section symbol should be included in the symbol table. The BSF_SECTION_SYM_USED should be set if the section symbol is used for relocation or the section symbol is always included in the symbol table. Add keep_unused_section_symbols to bfd_target to indicate if unused section symbols should be kept. If TARGET_KEEP_UNUSED_SECTION_SYMBOLS is defined as FALSE, unused ection symbols will be removed. Tested on Linux/x86. Other ELF backends need to: 1. Define TARGET_KEEP_UNUSED_SECTION_SYMBOLS to FALSE. 2. Mark used section symbols in assembler backend. 3. Remove unused section symbols from expected assembler and linker outputs. bfd/ PR 27109 * aix386-core.c (core_aix386_vec): Initialize keep_unused_section_symbol to TARGET_KEEP_UNUSED_SECTION_SYMBOLS. * aout-target.h (MY (vec)): Likewise. * binary.c (binary_vec): Likewise. * cisco-core.c (core_cisco_be_vec): Likewise. (core_cisco_le_vec): Likewise. * coff-alpha.c (alpha_ecoff_le_vec): Likewise. * coff-i386.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff-ia64.c (TARGET_SYM): Likewise. * coff-mips.c (mips_ecoff_le_vec): Likewise. (mips_ecoff_be_vec): Likewise. (mips_ecoff_bele_vec): Likewise. * coff-rs6000.c (rs6000_xcoff_vec): Likewise. (powerpc_xcoff_vec): Likewise. * coff-sh.c (sh_coff_small_vec): Likewise. (sh_coff_small_le_vec): Likewise. * coff-tic30.c (tic30_coff_vec): Likewise. * coff-tic54x.c (tic54x_coff0_vec): Likewise. (tic54x_coff0_beh_vec): Likewise. (tic54x_coff1_vec): Likewise. (tic54x_coff1_beh_vec): Likewise. (tic54x_coff2_vec): Likewise. (tic54x_coff2_beh_vec): Likewise. * coff-x86_64.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Likewise. (rs6000_xcoff64_aix_vec): Likewise. * coffcode.h (CREATE_BIG_COFF_TARGET_VEC): Likewise. (CREATE_BIGHDR_COFF_TARGET_VEC): Likewise. (CREATE_LITTLE_COFF_TARGET_VEC): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Likewise. (TARGET_LITTLE_SYM): Likewise. * hppabsd-core.c (core_hppabsd_vec): Likewise. * hpux-core.c (core_hpux_vec): Likewise. * i386msdos.c (i386_msdos_vec): Likewise. * ihex.c (ihex_vec): Likewise. * irix-core.c (core_irix_vec): Likewise. * mach-o-target.c (TARGET_NAME): Likewise. * mmo.c (mmix_mmo_vec): Likewise. * netbsd-core.c (core_netbsd_vec): Likewise. * osf-core.c (core_osf_vec): Likewise. * pdp11.c (MY (vec)): Likewise. * pef.c (pef_vec): Likewise. (pef_xlib_vec): Likewise. * plugin.c (plugin_vec): Likewise. * ppcboot.c (powerpc_boot_vec): Likewise. * ptrace-core.c (core_ptrace_vec): Likewise. * sco5-core.c (core_sco5_vec): Likewise. * som.c (hppa_som_vec): Likewise. * srec.c (srec_vec): Likewise. (symbolsrec_vec): Likewise. * tekhex.c (tekhex_vec): Likewise. * trad-core.c (core_trad_vec): Likewise. * verilog.c (verilog_vec): Likewise. * vms-alpha.c (alpha_vms_vec): Likewise. * vms-lib.c (alpha_vms_lib_txt_vec): Likewise. * wasm-module.c (wasm_vec): Likewise. * xsym.c (sym_vec): Likewise. * elf.c (ignore_section_sym): Return TRUE if BSF_SECTION_SYM_USED isn't set. (elf_map_symbols): Don't include ignored section symbols. * elfcode.h (elf_slurp_symbol_table): Also set BSF_SECTION_SYM_USED on STT_SECTION symbols. * elflink.c (bfd_elf_final_link): Generated section symbols only when emitting relocations or reqired. * elfxx-x86.h (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. * syms.c (BSF_SECTION_SYM_USED): New. * targets.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. (bfd_target): Add keep_unused_section_symbols. (bfd_keep_unused_section_symbols): New. * bfd-in2.h: Regenerated. binutils/ PR 27109 * objcopy.c (copy_object): Handle section symbols for non-relocatable inputs. * testsuite/binutils-all/readelf.exp (readelf_test): Check is_elf_unused_section_symbols. * testsuite/binutils-all/readelf.s-64: Updated. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: New file. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. * testsuite/lib/binutils-common.exp (is_elf_unused_section_symbols): New proc. gas/ChangeLog: PR 27109 * read.c (s_reloc): Call symbol_mark_used_in_reloc on the section symbol. * subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed. * write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc on the section symbol. (set_symtab): Don't generate unused section symbols. (maybe_generate_build_notes): Call symbol_mark_used_in_reloc on the section symbol. * config/obj-elf.c (elf_adjust_symtab): Call symbol_mark_used_in_reloc on the group signature symbol. * testsuite/gas/cfi/cfi-label.d: Remove unused section symbols from expected output. * testsuite/gas/elf/elf.exp (run_elf_list_test): Check is_elf_unused_section_symbols. * testsuite/gas/elf/section2.e: Updated. * testsuite/gas/elf/section2.e-unused: New file. * testsuite/gas/elf/symver.d: Remove unused section symbols. * testsuite/gas/i386/ilp32/elf/symver.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. * testsuite/gas/i386/size-1.d: Likewise. * testsuite/gas/i386/size-3.d: Likewise. * testsuite/gas/i386/svr4.d: Likewise. * testsuite/gas/i386/x86-64-size-1.d: Likewise. * testsuite/gas/i386/x86-64-size-3.d: Likewise. * testsuite/gas/i386/x86-64-size-5.d: Likewise. * testsuite/gas/i386/x86-64-unwind.d: Likewise. ld/ PR 27109 * testsuite/ld-elf/export-class.sd: Adjust the expected output. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/pr19609-4e.d: Likewise. * testsuite/ld-x86-64/pr19609-6a.d: Likewise. * testsuite/ld-x86-64/pr19609-6b.d: Likewise. * testsuite/ld-x86-64/pr19609-7b.d: Likewise. * testsuite/ld-x86-64/pr19609-7d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. * testsuite/ld-x86-64/pr23854.d: Likewise. * testsuite/ld-x86-64/pr25416-3.d: Likewise. * testsuite/ld-x86-64/pr25416-4.d: Likewise. * testsuite/ld-i386/plt-pic.pd: Likewise. * testsuite/ld-i386/plt-pic2.dd: Likewise. * testsuite/ld-i386/plt.pd: Likewise. * testsuite/ld-i386/plt2.dd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbin2.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-i386/tlspic2.rd: Likewise. * testsuite/ld-x86-64/mpx3.dd: Likewise. * testsuite/ld-x86-64/mpx3n.dd: Likewise. * testsuite/ld-x86-64/mpx4.dd: Likewise. * testsuite/ld-x86-64/mpx4n.dd: Likewise. * testsuite/ld-x86-64/pe-x86-64-1.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/plt.pd: Likewise. * testsuite/ld-x86-64/plt2.dd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbin2.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-x86-64/tlspic2.rd: Likewise. * testsuite/ld-elf/sec64k.exp: Check is_elf_unused_section_symbols.
2021-01-07 22:42:00 +08:00
+[a-f0-9]+: f2 e9 e1 ff ff ff bnd jmp [a-f0-9]+ <.*>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 90 nop
+[a-f0-9]+: f3 0f 1e fa endbr64
+[a-f0-9]+: 68 01 00 00 00 push \$0x1
ELF: Don't generate unused section symbols For ELF targets, section symbols are required only for relocations. With -ffunction-sections -fdata-sections, there can be many unused section symbols. Sizes of libstdc++.a on Linux/x86-64 in GCC 11 are With unused section symbols : 39411698 bytes Without unused section symbols: 39227002 bytes The unused section symbols in libstdc++.a occupy more than 180 KB. Add BSF_SECTION_SYM_USED to indicate if a section symbol should be included in the symbol table. The BSF_SECTION_SYM_USED should be set if the section symbol is used for relocation or the section symbol is always included in the symbol table. Add keep_unused_section_symbols to bfd_target to indicate if unused section symbols should be kept. If TARGET_KEEP_UNUSED_SECTION_SYMBOLS is defined as FALSE, unused ection symbols will be removed. Tested on Linux/x86. Other ELF backends need to: 1. Define TARGET_KEEP_UNUSED_SECTION_SYMBOLS to FALSE. 2. Mark used section symbols in assembler backend. 3. Remove unused section symbols from expected assembler and linker outputs. bfd/ PR 27109 * aix386-core.c (core_aix386_vec): Initialize keep_unused_section_symbol to TARGET_KEEP_UNUSED_SECTION_SYMBOLS. * aout-target.h (MY (vec)): Likewise. * binary.c (binary_vec): Likewise. * cisco-core.c (core_cisco_be_vec): Likewise. (core_cisco_le_vec): Likewise. * coff-alpha.c (alpha_ecoff_le_vec): Likewise. * coff-i386.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff-ia64.c (TARGET_SYM): Likewise. * coff-mips.c (mips_ecoff_le_vec): Likewise. (mips_ecoff_be_vec): Likewise. (mips_ecoff_bele_vec): Likewise. * coff-rs6000.c (rs6000_xcoff_vec): Likewise. (powerpc_xcoff_vec): Likewise. * coff-sh.c (sh_coff_small_vec): Likewise. (sh_coff_small_le_vec): Likewise. * coff-tic30.c (tic30_coff_vec): Likewise. * coff-tic54x.c (tic54x_coff0_vec): Likewise. (tic54x_coff0_beh_vec): Likewise. (tic54x_coff1_vec): Likewise. (tic54x_coff1_beh_vec): Likewise. (tic54x_coff2_vec): Likewise. (tic54x_coff2_beh_vec): Likewise. * coff-x86_64.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Likewise. (rs6000_xcoff64_aix_vec): Likewise. * coffcode.h (CREATE_BIG_COFF_TARGET_VEC): Likewise. (CREATE_BIGHDR_COFF_TARGET_VEC): Likewise. (CREATE_LITTLE_COFF_TARGET_VEC): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Likewise. (TARGET_LITTLE_SYM): Likewise. * hppabsd-core.c (core_hppabsd_vec): Likewise. * hpux-core.c (core_hpux_vec): Likewise. * i386msdos.c (i386_msdos_vec): Likewise. * ihex.c (ihex_vec): Likewise. * irix-core.c (core_irix_vec): Likewise. * mach-o-target.c (TARGET_NAME): Likewise. * mmo.c (mmix_mmo_vec): Likewise. * netbsd-core.c (core_netbsd_vec): Likewise. * osf-core.c (core_osf_vec): Likewise. * pdp11.c (MY (vec)): Likewise. * pef.c (pef_vec): Likewise. (pef_xlib_vec): Likewise. * plugin.c (plugin_vec): Likewise. * ppcboot.c (powerpc_boot_vec): Likewise. * ptrace-core.c (core_ptrace_vec): Likewise. * sco5-core.c (core_sco5_vec): Likewise. * som.c (hppa_som_vec): Likewise. * srec.c (srec_vec): Likewise. (symbolsrec_vec): Likewise. * tekhex.c (tekhex_vec): Likewise. * trad-core.c (core_trad_vec): Likewise. * verilog.c (verilog_vec): Likewise. * vms-alpha.c (alpha_vms_vec): Likewise. * vms-lib.c (alpha_vms_lib_txt_vec): Likewise. * wasm-module.c (wasm_vec): Likewise. * xsym.c (sym_vec): Likewise. * elf.c (ignore_section_sym): Return TRUE if BSF_SECTION_SYM_USED isn't set. (elf_map_symbols): Don't include ignored section symbols. * elfcode.h (elf_slurp_symbol_table): Also set BSF_SECTION_SYM_USED on STT_SECTION symbols. * elflink.c (bfd_elf_final_link): Generated section symbols only when emitting relocations or reqired. * elfxx-x86.h (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. * syms.c (BSF_SECTION_SYM_USED): New. * targets.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. (bfd_target): Add keep_unused_section_symbols. (bfd_keep_unused_section_symbols): New. * bfd-in2.h: Regenerated. binutils/ PR 27109 * objcopy.c (copy_object): Handle section symbols for non-relocatable inputs. * testsuite/binutils-all/readelf.exp (readelf_test): Check is_elf_unused_section_symbols. * testsuite/binutils-all/readelf.s-64: Updated. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: New file. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. * testsuite/lib/binutils-common.exp (is_elf_unused_section_symbols): New proc. gas/ChangeLog: PR 27109 * read.c (s_reloc): Call symbol_mark_used_in_reloc on the section symbol. * subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed. * write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc on the section symbol. (set_symtab): Don't generate unused section symbols. (maybe_generate_build_notes): Call symbol_mark_used_in_reloc on the section symbol. * config/obj-elf.c (elf_adjust_symtab): Call symbol_mark_used_in_reloc on the group signature symbol. * testsuite/gas/cfi/cfi-label.d: Remove unused section symbols from expected output. * testsuite/gas/elf/elf.exp (run_elf_list_test): Check is_elf_unused_section_symbols. * testsuite/gas/elf/section2.e: Updated. * testsuite/gas/elf/section2.e-unused: New file. * testsuite/gas/elf/symver.d: Remove unused section symbols. * testsuite/gas/i386/ilp32/elf/symver.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. * testsuite/gas/i386/size-1.d: Likewise. * testsuite/gas/i386/size-3.d: Likewise. * testsuite/gas/i386/svr4.d: Likewise. * testsuite/gas/i386/x86-64-size-1.d: Likewise. * testsuite/gas/i386/x86-64-size-3.d: Likewise. * testsuite/gas/i386/x86-64-size-5.d: Likewise. * testsuite/gas/i386/x86-64-unwind.d: Likewise. ld/ PR 27109 * testsuite/ld-elf/export-class.sd: Adjust the expected output. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/pr19609-4e.d: Likewise. * testsuite/ld-x86-64/pr19609-6a.d: Likewise. * testsuite/ld-x86-64/pr19609-6b.d: Likewise. * testsuite/ld-x86-64/pr19609-7b.d: Likewise. * testsuite/ld-x86-64/pr19609-7d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. * testsuite/ld-x86-64/pr23854.d: Likewise. * testsuite/ld-x86-64/pr25416-3.d: Likewise. * testsuite/ld-x86-64/pr25416-4.d: Likewise. * testsuite/ld-i386/plt-pic.pd: Likewise. * testsuite/ld-i386/plt-pic2.dd: Likewise. * testsuite/ld-i386/plt.pd: Likewise. * testsuite/ld-i386/plt2.dd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbin2.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-i386/tlspic2.rd: Likewise. * testsuite/ld-x86-64/mpx3.dd: Likewise. * testsuite/ld-x86-64/mpx3n.dd: Likewise. * testsuite/ld-x86-64/mpx4.dd: Likewise. * testsuite/ld-x86-64/mpx4n.dd: Likewise. * testsuite/ld-x86-64/pe-x86-64-1.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/plt.pd: Likewise. * testsuite/ld-x86-64/plt2.dd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbin2.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-x86-64/tlspic2.rd: Likewise. * testsuite/ld-elf/sec64k.exp: Check is_elf_unused_section_symbols.
2021-01-07 22:42:00 +08:00
+[a-f0-9]+: f2 e9 d1 ff ff ff bnd jmp [a-f0-9]+ <.*>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 90 nop
Disassembly of section .plt.sec:
elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-14 20:55:08 +08:00
[a-f0-9]+ <bar1@plt>:
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: f3 0f 1e fa endbr64
+[a-f0-9]+: f2 ff 25 ([0-9a-f]{2} ){4}[ ]+bnd jmp \*0x[a-f0-9]+\(%rip\) # [a-f0-9]+ <bar1>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 0f 1f 44 00 00 nopl 0x0\(%rax,%rax,1\)
elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-14 20:55:08 +08:00
[a-f0-9]+ <bar2@plt>:
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: f3 0f 1e fa endbr64
+[a-f0-9]+: f2 ff 25 ([0-9a-f]{2} ){4}[ ]+bnd jmp \*0x[a-f0-9]+\(%rip\) # [a-f0-9]+ <bar2>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 0f 1f 44 00 00 nopl 0x0\(%rax,%rax,1\)
Disassembly of section .text:
elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-14 20:55:08 +08:00
[a-f0-9]+ <foo>:
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 48 83 ec 08 sub \$0x8,%rsp
+[a-f0-9]+: e8 e7 ff ff ff call [a-f0-9]+ <bar2@plt>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
+[a-f0-9]+: 48 83 c4 08 add \$0x8,%rsp
+[a-f0-9]+: e9 ce ff ff ff jmp [a-f0-9]+ <bar1@plt>
x86: Support Intel IBT with IBT property and IBT-enable PLT To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22 20:44:37 +08:00
#pass