binutils-gdb/gdb/mipsread.c

458 lines
14 KiB
C
Raw Normal View History

1991-03-29 00:26:26 +08:00
/* Read a symbol table in MIPS' format (Third-Eye).
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994
Free Software Foundation, Inc.
Contributed by Alessandro Forin (af@cs.cmu.edu) at CMU. Major work
by Per Bothner, John Gilmore and Ian Lance Taylor at Cygnus Support.
1991-03-29 00:26:26 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
1991-03-29 00:26:26 +08:00
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1991-03-29 00:26:26 +08:00
This program is distributed in the hope that it will be useful,
1991-03-29 00:26:26 +08:00
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Read symbols from an ECOFF file. Most of the work is done in
mdebugread.c. */
1991-03-29 00:26:26 +08:00
#include "defs.h"
* configure.in: Check for working mmap, ansi headers, string.h, strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-08-02 04:14:27 +08:00
#include "gdb_string.h"
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
#include "bfd.h"
1991-03-29 00:26:26 +08:00
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
#include "gdb-stabs.h"
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
#include "coff/sym.h"
#include "coff/internal.h"
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
#include "coff/ecoff.h"
#include "libcoff.h" /* Private BFD COFF information. */
#include "libecoff.h" /* Private BFD ECOFF information. */
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
#include "elf/common.h"
#include "elf/mips.h"
static void
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
mipscoff_new_init PARAMS ((struct objfile *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
static void
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
mipscoff_symfile_init PARAMS ((struct objfile *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
static void
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
mipscoff_symfile_read PARAMS ((struct objfile *, struct section_offsets *,
int));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
static void
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
mipscoff_symfile_finish PARAMS ((struct objfile *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
static struct section_offsets *
mipscoff_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
static void
read_alphacoff_dynamic_symtab PARAMS ((struct section_offsets *,
struct objfile *objfile));
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Initialize anything that needs initializing when a completely new
symbol file is specified (not just adding some symbols from another
file, e.g. a shared library). */
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
extern CORE_ADDR sigtramp_address;
1991-03-29 00:26:26 +08:00
static void
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-30 07:17:36 +08:00
mipscoff_new_init (ignore)
struct objfile *ignore;
1991-03-29 00:26:26 +08:00
{
sigtramp_address = 0;
stabsread_new_init ();
buildsym_new_init ();
1991-03-29 00:26:26 +08:00
}
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Initialize to read a symbol file (nothing to do). */
static void
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-20 05:57:15 +08:00
mipscoff_symfile_init (objfile)
struct objfile *objfile;
1991-03-29 00:26:26 +08:00
{
}
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Read a symbol file from a file. */
static void
mipscoff_symfile_read (objfile, section_offsets, mainline)
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-20 05:57:15 +08:00
struct objfile *objfile;
struct section_offsets *section_offsets;
1991-03-29 00:26:26 +08:00
int mainline;
{
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
bfd *abfd = objfile->obfd;
struct cleanup * back_to;
init_minimal_symbol_collection ();
back_to = make_cleanup (discard_minimal_symbols, 0);
1991-03-29 00:26:26 +08:00
/* Now that the executable file is positioned at symbol table,
process it and define symbols accordingly. */
* configure.in: Check for working mmap, ansi headers, string.h, strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-08-02 04:14:27 +08:00
if (!((*ecoff_backend (abfd)->debug_swap.read_debug_info)
(abfd, (asection *) NULL, &ecoff_data (abfd)->debug_info)))
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
error ("Error reading symbol table: %s", bfd_errmsg (bfd_get_error ()));
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
mdebug_build_psymtabs (objfile, &ecoff_backend (abfd)->debug_swap,
&ecoff_data (abfd)->debug_info, section_offsets);
1991-03-29 00:26:26 +08:00
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
/* Add the dynamic symbols if we are reading the main symbol table. */
if (mainline)
read_alphacoff_dynamic_symtab (section_offsets, objfile);
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
1991-03-29 00:26:26 +08:00
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-20 05:57:15 +08:00
install_minimal_symbols (objfile);
do_cleanups (back_to);
1991-03-29 00:26:26 +08:00
}
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Perform any local cleanups required when we are done with a
particular objfile. */
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-20 05:57:15 +08:00
static void
mipscoff_symfile_finish (objfile)
struct objfile *objfile;
{
1991-03-29 00:26:26 +08:00
}
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Fake up identical offsets for all sections. */
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
static struct section_offsets *
mipscoff_symfile_offsets (objfile, addr)
struct objfile *objfile;
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
CORE_ADDR addr;
1991-03-29 00:26:26 +08:00
{
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
struct section_offsets *section_offsets;
int i;
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
objfile->num_sections = SECT_OFF_MAX;
section_offsets = ((struct section_offsets *)
obstack_alloc (&objfile->psymbol_obstack,
(sizeof (struct section_offsets)
+ (sizeof (section_offsets->offsets)
* (SECT_OFF_MAX - 1)))));
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
for (i = 0; i < SECT_OFF_MAX; i++)
ANOFFSET (section_offsets, i) = addr;
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
return section_offsets;
1991-03-29 00:26:26 +08:00
}
* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.
1994-04-08 08:35:15 +08:00
/* Alpha OSF/1 encapsulates the dynamic symbols in ELF format in a
standard coff section. The ELF format for the symbols differs from
the format defined in elf/external.h. It seems that a normal ELF 32 bit
format is used, and the representation only changes because longs are
64 bit on the alpha. In addition, the handling of text/data section
indices for symbols is different from the ELF ABI.
As the BFD linker currently does not support dynamic linking on the alpha,
there seems to be no reason to pollute BFD with another mixture of object
file formats for now. */
/* Format of an alpha external ELF symbol. */
typedef struct {
unsigned char st_name[4]; /* Symbol name, index in string tbl */
unsigned char st_pad[4]; /* Pad to long word boundary */
unsigned char st_value[8]; /* Value of the symbol */
unsigned char st_size[4]; /* Associated symbol size */
unsigned char st_info[1]; /* Type and binding attributes */
unsigned char st_other[1]; /* No defined meaning, 0 */
unsigned char st_shndx[2]; /* Associated section index */
} Elfalpha_External_Sym;
/* Format of an alpha external ELF dynamic info structure. */
typedef struct {
unsigned char d_tag[4]; /* Tag */
unsigned char d_pad[4]; /* Pad to long word boundary */
union {
unsigned char d_ptr[8]; /* Pointer value */
unsigned char d_val[4]; /* Integer value */
} d_un;
} Elfalpha_External_Dyn;
/* Struct to obtain the section pointers for alpha dynamic symbol info. */
struct alphacoff_dynsecinfo {
asection *sym_sect; /* Section pointer for .dynsym section */
asection *str_sect; /* Section pointer for .dynstr section */
asection *dyninfo_sect; /* Section pointer for .dynamic section */
asection *got_sect; /* Section pointer for .got section */
};
static void
alphacoff_locate_sections PARAMS ((bfd *, asection *, void *));
/* We are called once per section from read_alphacoff_dynamic_symtab.
We need to examine each section we are passed, check to see
if it is something we are interested in processing, and
if so, stash away some access information for the section. */
static void
alphacoff_locate_sections (ignore_abfd, sectp, sip)
bfd *ignore_abfd;
asection *sectp;
PTR sip;
{
register struct alphacoff_dynsecinfo *si;
si = (struct alphacoff_dynsecinfo *) sip;
if (STREQ (sectp->name, ".dynsym"))
{
si->sym_sect = sectp;
}
else if (STREQ (sectp->name, ".dynstr"))
{
si->str_sect = sectp;
}
else if (STREQ (sectp->name, ".dynamic"))
{
si->dyninfo_sect = sectp;
}
else if (STREQ (sectp->name, ".got"))
{
si->got_sect = sectp;
}
}
/* Scan an alpha dynamic symbol table for symbols of interest and
add them to the minimal symbol table. */
static void
read_alphacoff_dynamic_symtab (section_offsets, objfile)
struct section_offsets *section_offsets;
struct objfile *objfile;
{
bfd *abfd = objfile->obfd;
struct alphacoff_dynsecinfo si;
char *sym_secptr;
char *str_secptr;
char *dyninfo_secptr;
char *got_secptr;
bfd_size_type sym_secsize;
bfd_size_type str_secsize;
bfd_size_type dyninfo_secsize;
bfd_size_type got_secsize;
int sym_count;
int i;
int stripped;
Elfalpha_External_Sym *x_symp;
char *dyninfo_p;
char *dyninfo_end;
int got_entry_size = 8;
int dt_mips_local_gotno = -1;
int dt_mips_gotsym = -1;
/* We currently only know how to handle alpha dynamic symbols. */
if (bfd_get_arch (abfd) != bfd_arch_alpha)
return;
/* Locate the dynamic symbols sections and read them in. */
memset ((char *) &si, 0, sizeof (si));
bfd_map_over_sections (abfd, alphacoff_locate_sections, (PTR) &si);
if (si.sym_sect == NULL
|| si.str_sect == NULL
|| si.dyninfo_sect == NULL
|| si.got_sect == NULL)
return;
sym_secsize = bfd_get_section_size_before_reloc (si.sym_sect);
str_secsize = bfd_get_section_size_before_reloc (si.str_sect);
dyninfo_secsize = bfd_get_section_size_before_reloc (si.dyninfo_sect);
got_secsize = bfd_get_section_size_before_reloc (si.got_sect);
sym_secptr = alloca (sym_secsize);
str_secptr = alloca (str_secsize);
dyninfo_secptr = alloca (dyninfo_secsize);
got_secptr = alloca (got_secsize);
if (!bfd_get_section_contents (abfd, si.sym_sect, sym_secptr,
(file_ptr)0, sym_secsize))
return;
if (!bfd_get_section_contents (abfd, si.str_sect, str_secptr,
(file_ptr)0, str_secsize))
return;
if (!bfd_get_section_contents (abfd, si.dyninfo_sect, dyninfo_secptr,
(file_ptr)0, dyninfo_secsize))
return;
if (!bfd_get_section_contents (abfd, si.got_sect, got_secptr,
(file_ptr)0, got_secsize))
return;
/* Find the number of local GOT entries and the index for the
the first dynamic symbol in the GOT. */
for (dyninfo_p = dyninfo_secptr, dyninfo_end = dyninfo_p + dyninfo_secsize;
dyninfo_p < dyninfo_end;
dyninfo_p += sizeof (Elfalpha_External_Dyn))
{
Elfalpha_External_Dyn *x_dynp = (Elfalpha_External_Dyn *)dyninfo_p;
long dyn_tag;
dyn_tag = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp->d_tag);
if (dyn_tag == DT_NULL)
break;
else if (dyn_tag == DT_MIPS_LOCAL_GOTNO)
{
dt_mips_local_gotno = bfd_h_get_32 (abfd,
(bfd_byte *) x_dynp->d_un.d_val);
}
else if (dyn_tag == DT_MIPS_GOTSYM)
{
dt_mips_gotsym = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp->d_un.d_val);
}
}
if (dt_mips_local_gotno < 0 || dt_mips_gotsym < 0)
return;
/* Scan all dynamic symbols and enter them into the minimal symbol table
if appropriate. */
sym_count = sym_secsize / sizeof (Elfalpha_External_Sym);
stripped = (bfd_get_symcount (abfd) == 0);
/* Skip first symbol, which is a null dummy. */
for (i = 1, x_symp = (Elfalpha_External_Sym *) sym_secptr + 1;
i < sym_count;
i++, x_symp++)
{
unsigned long strx;
char *name;
bfd_vma sym_value;
unsigned char sym_info;
unsigned int sym_shndx;
int isglobal;
enum minimal_symbol_type ms_type;
strx = bfd_h_get_32 (abfd, (bfd_byte *) x_symp->st_name);
if (strx >= str_secsize)
continue;
name = str_secptr + strx;
if (*name == '\0' || *name == '.')
continue;
sym_value = bfd_h_get_64 (abfd, (bfd_byte *) x_symp->st_value);
sym_info = bfd_h_get_8 (abfd, (bfd_byte *) x_symp->st_info);
sym_shndx = bfd_h_get_16 (abfd, (bfd_byte *) x_symp->st_shndx);
isglobal = (ELF_ST_BIND (sym_info) == STB_GLOBAL);
if (sym_shndx == SHN_UNDEF)
{
/* Handle undefined functions which are defined in a shared
library. */
if (ELF_ST_TYPE (sym_info) != STT_FUNC
|| ELF_ST_BIND (sym_info) != STB_GLOBAL)
continue;
ms_type = mst_solib_trampoline;
/* If sym_value is nonzero, it points to the shared library
trampoline entry, which is what we are looking for.
If sym_value is zero, then we have to get the GOT entry
for the symbol.
If the GOT entry is nonzero, it represents the quickstart
address of the function and we use that as the symbol value.
If the GOT entry is zero, the function address has to be resolved
by the runtime loader before the executable is started.
We are unable to find any meaningful address for these
functions in the executable file, so we skip them. */
if (sym_value == 0)
{
int got_entry_offset =
(i - dt_mips_gotsym + dt_mips_local_gotno) * got_entry_size;
if (got_entry_offset < 0 || got_entry_offset >= got_secsize)
continue;
sym_value =
bfd_h_get_64 (abfd,
(bfd_byte *) (got_secptr + got_entry_offset));
if (sym_value == 0)
continue;
}
}
else
{
/* Symbols defined in the executable itself. We only care about
them if this is a stripped executable, otherwise they have
been retrieved from the normal symbol table already. */
if (!stripped)
continue;
if (sym_shndx == SHN_MIPS_TEXT)
{
if (isglobal)
ms_type = mst_text;
else
ms_type = mst_file_text;
sym_value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
}
else if (sym_shndx == SHN_MIPS_DATA)
{
if (isglobal)
ms_type = mst_data;
else
ms_type = mst_file_data;
sym_value += ANOFFSET (section_offsets, SECT_OFF_DATA);
}
else if (sym_shndx == SHN_MIPS_ACOMMON)
{
if (isglobal)
ms_type = mst_bss;
else
ms_type = mst_file_bss;
sym_value += ANOFFSET (section_offsets, SECT_OFF_BSS);
}
else if (sym_shndx == SHN_ABS)
{
ms_type = mst_abs;
}
else
{
continue;
}
}
prim_record_minimal_symbol (obsavestring (name,
strlen (name),
&objfile -> symbol_obstack),
sym_value,
ms_type,
objfile);
}
}
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
/* Initialization */
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
static struct sym_fns ecoff_sym_fns =
{
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
bfd_target_ecoff_flavour,
mipscoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
mipscoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
mipscoff_symfile_read, /* sym_read: read a symbol file into symtab */
mipscoff_symfile_finish, /* sym_finish: finished with file, cleanup */
mipscoff_symfile_offsets, /* sym_offsets: dummy FIXME til implem sym reloc */
NULL /* next: pointer to next struct sym_fns */
};
1991-03-29 00:26:26 +08:00
Added Irix 5 support. * configure.in (mips-sgi-irix5*): New host and target. Use irix5 for both. * config/mips/irix5.mh, config/mips/irix5.mt, config/mips/xm-irix5.h, config/mips/nm-irix5.h, config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. * mdebugread.c: New file, split out of mipsread.c. Added elfmdebug_build_psymtabs routine. Added some checks on external symbols. Changed code to keep ecoff_debug_info and ecoff_debug_swap structs in the psymtab and in global pointers rather than retrieving them from the bfd. Also changed to keep the pending list with the psymtab rather than the objfile (each psymtab for a single objfile points to the same pending list). * mipsread.c: Bulk of file moved into mdebugread.c, leaving just the sym_fns. * Makefile.in (SFILES): Added mdebugread.c. (OBS): Added mdebugread.o. (mdebugread.o): New target. * symfile.h: Declare mdebug_build_psymtabs and elfmdebug_build_psymtabs. * elfread.c (struct elfinfo): Added mdebugsect field. (elf_locate_sections): Remember location of .mdebug section. (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug section. * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see if PC is at the start of a function. * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and give it a default definition. (mips_skip_prologue): Skip instructions which initialize $gp register. (in_sigtramp): New procedure, moved in from mipsread.c. * config/mips/tm-mips.h: Declare in_sigtramp.
1993-12-07 01:31:05 +08:00
void
_initialize_mipsread ()
1991-03-29 00:26:26 +08:00
{
add_symtab_fns (&ecoff_sym_fns);
1991-03-29 00:26:26 +08:00
}