binutils-gdb/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp

# Copyright 2013-2016 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

load_lib trace-support.exp

standard_testfile actions.c

if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} {debug}] } {
    return -1
}

if ![runto_main] {
    fail "Can't run to main to check for trace support"
    return -1
}

if ![gdb_target_supports_trace] {
    unsupported "Current target does not support trace"
    return -1
}

gdb_exit

load_lib mi-support.exp
set MIFLAGS "-i=mi"

if [mi_gdb_start] {
    return
}
mi_run_to_main

mi_gdb_test "-break-insert end" \
    "\\^done,bkpt=\{number=\"${decimal}\",type=\"breakpoint\".*\"\}" \
    "insert tracepoint on end"
mi_gdb_test "-break-insert -a gdb_recursion_test" \
    "\\^done,bkpt=\{number=\"${decimal}\",type=\"tracepoint\".*\"\}" \
    "insert tracepoint on gdb_recursion_test"

mi_gdb_test "-trace-define-variable \$tsv 1" {.*\^done} \
    "-trace-define-variable"

mi_gdb_test "-break-commands 3 \"collect gdb_char_test\" \"collect gdb_union1_test\" \"collect gdb_struct1_test.l\" \"collect gdb_arr_test\[0\]\" \"collect $${pcreg}\" \"teval \$tsv += 1\" \"collect \$tsv\" \"end\" " \
    {\^done} "set action"

mi_gdb_test "-break-insert -a gdb_c_test" \
    "\\^done,bkpt=\{number=\"${decimal}\",type=\"tracepoint\".*\"\}" \
    "insert tracepoint on gdb_c_test"

# Define an action.
# Collect a global variable to be sure no registers are collected
# except PC.
mi_gdb_test "-break-commands 4 \"collect gdb_char_test\" \"end\" " \
    {\^done} "set action on tracepoint 4"

mi_gdb_test "-trace-start" {.*\^done} "trace start"
mi_send_resuming_command "exec-continue" "continuing to end"
mi_expect_stop \
    "breakpoint-hit" "end" ".*" ".*" ".*" {"" "disp=\"keep\""} \
    "stop at end"
mi_gdb_test "-trace-stop" {.*\^done,stop-reason=.*} "trace stop"

# Save trace frames to tfile.
set tracefile [standard_output_file ${testfile}]
mi_gdb_test "-trace-save ${tracefile}.tf" ".*\\^done" \
    "save tfile trace file"
# Save trace frames to ctf.
mi_gdb_test "-trace-save -ctf ${tracefile}.ctf" ".*\\^done" \
    "save ctf trace file"

# Test the MI command '-trace-frame-collected' with DATA_SOURCE as
# trace data source.

proc test_trace_frame_collected { data_source } {
    global decimal hex
    global mi_gdb_prompt

    with_test_prefix "$data_source" {
	mi_gdb_test "-trace-find frame-number 0" \
	    ".*\\^done,found=\"1\",tracepoint=\"${decimal}\",traceframe=\"0\",frame=\{.*" \
	    "-trace-find frame-number 0"

	set reg_pattern "\{number=\"$decimal\",value=\"$hex\"\}"

	# Test MI command '-trace-frame-collected' dumps only
	# collected registers.

	# While the tracepoint has no explicit action that causes
	# collection of registers other than the PC, some
	# architectures manage to collect or guess more than that.
	if { [istarget "s390*-*-*"] } {
	    # On s390 PC is a pseudo-register - collecting it also
	    # collects the underlying PSWA register.
	    if { "$data_source" != "tfile" } {
		set reg_pattern "$reg_pattern,$reg_pattern"
	    } else {
		# For tfile, PSWM and CC are also guessed.
		set reg_pattern "$reg_pattern,$reg_pattern,$reg_pattern,$reg_pattern"
	    }
	} elseif {[is_amd64_regs_target] && [is_ilp32_target]} {
	    # x32.  While on the 64-bit ABI gdb only exposes 64-bit
	    # $pc/$rip, on x32, GDB exposes 32-bit $eip as well, as a
	    # pseudo-register.  Thus, collecting $pc/$rip
	    # automatically always collects $eip as well.
	    set reg_pattern "$reg_pattern,$reg_pattern"
	}

	mi_gdb_test "-trace-frame-collected" \
	    "\\^done,explicit-variables=\\\[\{name=\"gdb_char_test\",value=\".*\"\}\\\],computed-expressions=\\\[\\\],registers=\\\[$reg_pattern\\\],tvars=\\\[\\\],memory=\\\[\{address=\"$hex\",length=\"1\"\}\\\]"\
	    "-trace-frame-collected (register)"

	mi_gdb_test "-trace-find frame-number 1" \
	    ".*\\^done,found=\"1\",tracepoint=\"${decimal}\",traceframe=\"1\",frame=\{.*" \
	    "-trace-find frame-number 1"

	# Test MI command '-trace-frame-collected'
	mi_gdb_test "-trace-frame-collected" \
	    "\\^done,explicit-variables=\\\[\{name=\"gdb_char_test\",value=\".*\"\},\{name=\"gdb_union1_test\",value=\".*\"\}\\\],computed-expressions=\\\[\{name=\"gdb_struct1_test\.l\",.*\},\{name=\"gdb_arr_test\\\[0\\\]\",.*\}\\\],registers=\\\[.*\\\],tvars=\\\[\{name=\"\\\$tsv\",current=\"2\"\}\\\],memory=\\\[\{address=\"$hex\",length=\"1\"\},.*\\\]"\
	    "-trace-frame-collected"
	mi_gdb_test "-trace-frame-collected --var-print-values 2 --comp-print-values --simple-values --registers-format x --memory-contents" \
	    "\\^done,explicit-variables=\\\[\{name=\"gdb_char_test\",type=\"char\",value=\".*\"\},\{name=\"gdb_union1_test\",type=\"union GDB_UNION_TEST\"\}\\\],computed-expressions=\\\[.*\\\],registers=\\\[.*\\\],tvars=\\\[\{name=\"\\\$tsv\",current=\"2\"\}\\\],memory=\\\[\{address=\"$hex\",length=\"1\",contents=\".*\"\},.*\\\]" \
	    "-trace-frame-collected --var-print-values 2 --comp-print-values --simple-values --registers-format x --memory-contents"

	mi_gdb_test "-trace-find none" ".*\\^done,found=\"0\".*" \
	    "-trace-find none"
    }
}

test_trace_frame_collected "live"

# Change target to ctf if GDB supports it.
set msg "-target-select ctf"
send_gdb "-target-select ctf ${tracefile}.ctf\n"
gdb_expect {
    -re ".*\\^connected.*${mi_gdb_prompt}$" {
	# GDB supports ctf, do the test.
	test_trace_frame_collected "ctf"
    }
    -re ".*\\^error,msg=\"Undefined target command.*${mi_gdb_prompt}$" {
	# GDB doesn't support ctf, skip the test.
	unsupported "gdb does not support ctf target"
    }
    -re ".*$mi_gdb_prompt$" {
	fail "$msg"
    }
    timeout {
	fail "$msg (timeout)"
    }
}

# Change target to tfile.
mi_gdb_test "-target-select tfile ${tracefile}.tf" ".*\\^connected.*" \
    "-target-select tfile"
test_trace_frame_collected "tfile"

mi_gdb_exit