Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
/* Thread iterators and ranges for GDB, the GNU debugger.
|
2019-01-01 14:01:51 +08:00
|
|
|
Copyright (C) 2018-2019 Free Software Foundation, Inc.
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
#ifndef THREAD_ITER_H
|
|
|
|
#define THREAD_ITER_H
|
|
|
|
|
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
2019-05-06 10:29:24 +08:00
|
|
|
#include "gdbsupport/filtered-iterator.h"
|
|
|
|
#include "gdbsupport/next-iterator.h"
|
|
|
|
#include "gdbsupport/safe-iterator.h"
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
/* A forward iterator that iterates over a given inferior's
|
|
|
|
threads. */
|
|
|
|
|
2019-01-11 01:50:43 +08:00
|
|
|
using inf_threads_iterator = next_iterator<thread_info>;
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
/* A forward iterator that iterates over all threads of all
|
|
|
|
inferiors. */
|
|
|
|
|
|
|
|
class all_threads_iterator
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
typedef all_threads_iterator self_type;
|
|
|
|
typedef struct thread_info *value_type;
|
|
|
|
typedef struct thread_info *&reference;
|
|
|
|
typedef struct thread_info **pointer;
|
|
|
|
typedef std::forward_iterator_tag iterator_category;
|
|
|
|
typedef int difference_type;
|
|
|
|
|
|
|
|
/* Tag type. */
|
|
|
|
struct begin_t {};
|
|
|
|
|
|
|
|
/* Create an iterator that points to the first thread of the first
|
|
|
|
inferior. */
|
|
|
|
explicit all_threads_iterator (begin_t);
|
|
|
|
|
|
|
|
/* Create a one-past-end iterator. */
|
|
|
|
all_threads_iterator ()
|
|
|
|
: m_thr (nullptr)
|
|
|
|
{}
|
|
|
|
|
|
|
|
thread_info *operator* () const { return m_thr; }
|
|
|
|
|
|
|
|
all_threads_iterator &operator++ ()
|
|
|
|
{
|
|
|
|
advance ();
|
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool operator== (const all_threads_iterator &other) const
|
|
|
|
{ return m_thr == other.m_thr; }
|
|
|
|
|
|
|
|
bool operator!= (const all_threads_iterator &other) const
|
|
|
|
{ return m_thr != other.m_thr; }
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* Advance to the next thread. */
|
|
|
|
void advance ();
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* The current inferior and thread. M_THR is NULL if we reached the
|
|
|
|
end of the threads list of the last inferior. */
|
|
|
|
inferior *m_inf;
|
|
|
|
thread_info *m_thr;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Iterate over all threads that match a given PTID. */
|
|
|
|
|
|
|
|
class all_matching_threads_iterator
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
typedef all_matching_threads_iterator self_type;
|
|
|
|
typedef struct thread_info *value_type;
|
|
|
|
typedef struct thread_info *&reference;
|
|
|
|
typedef struct thread_info **pointer;
|
|
|
|
typedef std::forward_iterator_tag iterator_category;
|
|
|
|
typedef int difference_type;
|
|
|
|
|
|
|
|
/* Creates an iterator that iterates over all threads that match
|
|
|
|
FILTER_PTID. */
|
|
|
|
explicit all_matching_threads_iterator (ptid_t filter_ptid);
|
|
|
|
|
|
|
|
/* Create a one-past-end iterator. */
|
|
|
|
all_matching_threads_iterator ()
|
|
|
|
: m_inf (nullptr),
|
|
|
|
m_thr (nullptr),
|
|
|
|
m_filter_ptid (minus_one_ptid)
|
|
|
|
{}
|
|
|
|
|
|
|
|
thread_info *operator* () const { return m_thr; }
|
|
|
|
|
|
|
|
all_matching_threads_iterator &operator++ ()
|
|
|
|
{
|
|
|
|
advance ();
|
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool operator== (const all_matching_threads_iterator &other) const
|
|
|
|
{ return m_thr == other.m_thr; }
|
|
|
|
|
|
|
|
bool operator!= (const all_matching_threads_iterator &other) const
|
|
|
|
{ return m_thr != other.m_thr; }
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* Advance to next thread, skipping filtered threads. */
|
|
|
|
void advance ();
|
|
|
|
|
|
|
|
/* True if M_INF matches the process identified by
|
|
|
|
M_FILTER_PTID. */
|
|
|
|
bool m_inf_matches ();
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* The current inferior. */
|
|
|
|
inferior *m_inf;
|
|
|
|
|
|
|
|
/* The current thread. */
|
|
|
|
thread_info *m_thr;
|
|
|
|
|
|
|
|
/* The filter. */
|
|
|
|
ptid_t m_filter_ptid;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Filter for filtered_iterator. Filters out exited threads. */
|
|
|
|
|
|
|
|
struct non_exited_thread_filter
|
|
|
|
{
|
|
|
|
bool operator() (struct thread_info *thr) const
|
|
|
|
{
|
|
|
|
return thr->state != THREAD_EXITED;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Iterate over all non-exited threads that match a given PTID. */
|
|
|
|
|
|
|
|
using all_non_exited_threads_iterator
|
|
|
|
= filtered_iterator<all_matching_threads_iterator, non_exited_thread_filter>;
|
|
|
|
|
|
|
|
/* Iterate over all non-exited threads of an inferior. */
|
|
|
|
|
|
|
|
using inf_non_exited_threads_iterator
|
|
|
|
= filtered_iterator<inf_threads_iterator, non_exited_thread_filter>;
|
|
|
|
|
|
|
|
/* Iterate over all threads of all inferiors, safely. */
|
|
|
|
|
|
|
|
using all_threads_safe_iterator
|
|
|
|
= basic_safe_iterator<all_threads_iterator>;
|
|
|
|
|
|
|
|
/* Iterate over all threads of an inferior, safely. */
|
|
|
|
|
|
|
|
using safe_inf_threads_iterator
|
|
|
|
= basic_safe_iterator<inf_threads_iterator>;
|
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all threads
|
|
|
|
of an inferior with range-for. */
|
|
|
|
|
|
|
|
using inf_threads_range
|
2019-01-11 01:50:43 +08:00
|
|
|
= next_adapter<thread_info, inf_threads_iterator>;
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all
|
|
|
|
non-exited threads of an inferior with range-for. */
|
|
|
|
|
|
|
|
using inf_non_exited_threads_range
|
2019-01-11 01:50:43 +08:00
|
|
|
= next_adapter<thread_info, inf_non_exited_threads_iterator>;
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all threads
|
|
|
|
of an inferior with range-for, safely. */
|
|
|
|
|
|
|
|
using safe_inf_threads_range
|
2019-01-11 01:50:43 +08:00
|
|
|
= next_adapter<thread_info, safe_inf_threads_iterator>;
|
Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
2018-11-23 00:09:14 +08:00
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all threads
|
|
|
|
of all inferiors with range-for. */
|
|
|
|
|
|
|
|
struct all_threads_range
|
|
|
|
{
|
|
|
|
all_threads_iterator begin () const
|
|
|
|
{ return all_threads_iterator (all_threads_iterator::begin_t {}); }
|
|
|
|
all_threads_iterator end () const
|
|
|
|
{ return all_threads_iterator (); }
|
|
|
|
};
|
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all threads
|
|
|
|
with range-for "safely". I.e., it is safe to delete the
|
|
|
|
currently-iterated thread. */
|
|
|
|
|
|
|
|
struct all_threads_safe_range
|
|
|
|
{
|
|
|
|
all_threads_safe_iterator begin () const
|
|
|
|
{ return all_threads_safe_iterator (all_threads_iterator::begin_t {}); }
|
|
|
|
all_threads_safe_iterator end () const
|
|
|
|
{ return all_threads_safe_iterator (); }
|
|
|
|
};
|
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all threads
|
|
|
|
that match a PTID filter with range-for. */
|
|
|
|
|
|
|
|
struct all_matching_threads_range
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
explicit all_matching_threads_range (ptid_t filter_ptid)
|
|
|
|
: m_filter_ptid (filter_ptid)
|
|
|
|
{}
|
|
|
|
all_matching_threads_range ()
|
|
|
|
: m_filter_ptid (minus_one_ptid)
|
|
|
|
{}
|
|
|
|
|
|
|
|
all_matching_threads_iterator begin () const
|
|
|
|
{ return all_matching_threads_iterator (m_filter_ptid); }
|
|
|
|
all_matching_threads_iterator end () const
|
|
|
|
{ return all_matching_threads_iterator (); }
|
|
|
|
|
|
|
|
private:
|
|
|
|
/* The filter. */
|
|
|
|
ptid_t m_filter_ptid;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* A range adapter that makes it possible to iterate over all
|
|
|
|
non-exited threads of all inferiors, with range-for.
|
|
|
|
Threads/inferiors that do not match FILTER_PTID are filtered
|
|
|
|
out. */
|
|
|
|
|
|
|
|
class all_non_exited_threads_range
|
|
|
|
{
|
|
|
|
public:
|
|
|
|
explicit all_non_exited_threads_range (ptid_t filter_ptid)
|
|
|
|
: m_filter_ptid (filter_ptid)
|
|
|
|
{}
|
|
|
|
|
|
|
|
all_non_exited_threads_range ()
|
|
|
|
: m_filter_ptid (minus_one_ptid)
|
|
|
|
{}
|
|
|
|
|
|
|
|
all_non_exited_threads_iterator begin () const
|
|
|
|
{ return all_non_exited_threads_iterator (m_filter_ptid); }
|
|
|
|
all_non_exited_threads_iterator end () const
|
|
|
|
{ return all_non_exited_threads_iterator (); }
|
|
|
|
|
|
|
|
private:
|
|
|
|
ptid_t m_filter_ptid;
|
|
|
|
};
|
|
|
|
|
|
|
|
#endif /* THREAD_ITER_H */
|