binutils-gdb/gdbserver/tdesc.cc

236 lines
5.1 KiB
C++
Raw Normal View History

/* Copyright (C) 2012-2022 Free Software Foundation, Inc.
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
#include "tdesc.h"
#include "regdef.h"
#ifndef IN_PROCESS_AGENT
target_desc::~target_desc ()
{
xfree ((char *) arch);
xfree ((char *) osabi);
}
bool target_desc::operator== (const target_desc &other) const
{
if (reg_defs != other.reg_defs)
return false;
/* Compare expedite_regs. */
int i = 0;
for (; expedite_regs[i] != NULL; i++)
{
if (strcmp (expedite_regs[i], other.expedite_regs[i]) != 0)
return false;
}
if (other.expedite_regs[i] != NULL)
return false;
return true;
}
#endif
void target_desc::accept (tdesc_element_visitor &v) const
{
#ifndef IN_PROCESS_AGENT
v.visit_pre (this);
for (const tdesc_feature_up &feature : features)
feature->accept (v);
v.visit_post (this);
#endif
}
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
void
gdbserver/Windows: crash during connection establishment phase On Windows, starting a new process with GDBserver seems to work, in the sense that the program does get started, and GDBserver confirms that it is listening for GDB to connect. However, as soon as GDB establishes the connection with GDBserver, and starts discussing with it, GDBserver crashes, with a SEGV. This SEGV occurs in remote-utils.c::prepare_resume_reply... | regp = current_target_desc ()->expedite_regs; | [...] | while (*regp) ... because, in our case, REGP is NULL. This patches fixes the issues by adding a parameter to init_target_desc, in order to make sure that we always provide the list of registers when we initialize a target description. gdb/ChangeLog: PR server/23158: * regformats/regdat.sh: Adjust script, following the addition of the new expedite_regs parameter to init_target_desc. gdb/gdbserver/ChangeLog: PR server/23158: * tdesc.h (init_target_desc) <expedite_regs>: New parameter. * tdesc.c (init_target_desc) <expedite_regs>: New parameter. Use it to set the expedite_regs field in the given tdesc. * x86-tdesc.h: New file. * linux-aarch64-tdesc.c (aarch64_linux_read_description): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * linux-tic6x-low.c (tic6x_read_description): Likewise. * linux-x86-tdesc.c: #include "x86-tdesc.h". (i386_linux_read_description, amd64_linux_read_description): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * lynx-i386-low.c: #include "x86-tdesc.h". (lynx_i386_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * nto-x86-low.c: #include "x86-tdesc.h". (nto_x86_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * win32-i386-low.c: #include "x86-tdesc.h". (i386_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc.
2018-05-10 23:27:13 +08:00
init_target_desc (struct target_desc *tdesc,
const char **expedite_regs)
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
{
int offset = 0;
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
/* Go through all the features and populate reg_defs. */
for (const tdesc_feature_up &feature : tdesc->features)
for (const tdesc_reg_up &treg : feature->registers)
{
int regnum = treg->target_regnum;
/* Register number will increase (possibly with gaps) or be zero. */
gdb_assert (regnum == 0 || regnum >= tdesc->reg_defs.size ());
if (regnum != 0)
tdesc->reg_defs.resize (regnum, gdb::reg (offset));
tdesc->reg_defs.emplace_back (treg->name.c_str (), offset,
treg->bitsize);
offset += treg->bitsize;
}
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
tdesc->registers_size = offset / 8;
/* Make sure PBUFSIZ is large enough to hold a full register
packet. */
gdb_assert (2 * tdesc->registers_size + 32 <= PBUFSIZ);
gdbserver/Windows: crash during connection establishment phase On Windows, starting a new process with GDBserver seems to work, in the sense that the program does get started, and GDBserver confirms that it is listening for GDB to connect. However, as soon as GDB establishes the connection with GDBserver, and starts discussing with it, GDBserver crashes, with a SEGV. This SEGV occurs in remote-utils.c::prepare_resume_reply... | regp = current_target_desc ()->expedite_regs; | [...] | while (*regp) ... because, in our case, REGP is NULL. This patches fixes the issues by adding a parameter to init_target_desc, in order to make sure that we always provide the list of registers when we initialize a target description. gdb/ChangeLog: PR server/23158: * regformats/regdat.sh: Adjust script, following the addition of the new expedite_regs parameter to init_target_desc. gdb/gdbserver/ChangeLog: PR server/23158: * tdesc.h (init_target_desc) <expedite_regs>: New parameter. * tdesc.c (init_target_desc) <expedite_regs>: New parameter. Use it to set the expedite_regs field in the given tdesc. * x86-tdesc.h: New file. * linux-aarch64-tdesc.c (aarch64_linux_read_description): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * linux-tic6x-low.c (tic6x_read_description): Likewise. * linux-x86-tdesc.c: #include "x86-tdesc.h". (i386_linux_read_description, amd64_linux_read_description): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * lynx-i386-low.c: #include "x86-tdesc.h". (lynx_i386_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * nto-x86-low.c: #include "x86-tdesc.h". (nto_x86_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc. * win32-i386-low.c: #include "x86-tdesc.h". (i386_arch_setup): Adjust following the addition of the new expedite_regs parameter to init_target_desc.
2018-05-10 23:27:13 +08:00
#ifndef IN_PROCESS_AGENT
tdesc->expedite_regs = expedite_regs;
#endif
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
}
gdb/riscv: delete target descriptions when gdb exits It was pointed out on IRC that the RISC-V target allocates target descriptions and stores them in a global map, and doesn't delete these target descriptions when GDB shuts down. This isn't a particular problem, the total number of target descriptions we can create is very limited so creating these on demand and holding them for the entire run on GDB seems reasonable. However, not deleting these objects on GDB exit means extra warnings are printed from tools like valgrind, and the address sanitiser, making it harder to spot real issues. As it's reasonably easy to have GDB correctly delete these objects on exit, lets just do that. I started by noticing that we already have a target_desc_up type, a wrapper around unique_ptr that calls a function that will correctly delete target descriptions, so I want to use that, but.... ...that type is declared in gdb/target-descriptions.h. If I try to include that file in gdb/arch/riscv.c I run into a problem, that file is compiled into both GDB and GDBServer. OK, I could guard the include with #ifdef, but surely we can do better. So then I decided to move the target_desc_up type into gdbsupport/tdesc.h, this is the interface file for generic code shared between GDB and GDBserver (relating to target descriptions). The actual implementation for the delete function still lives in gdb/target-description.c, but now gdb/arch/riscv.c can see the declaration. Problem solved.... ... but, though RISC-V doesn't use it I've now exposed the target_desc_up type to gdbserver, so in future someone _might_ start using it, which is fine, except right now there's no definition of the delete function - remember the delete I used is only defined in GDB code. No problem, I add an implementation of the delete operator into gdbserver/tdesc.cc, and all is good..... except.... I start getting this error from GCC: tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor] Which is caused because gdbserver's target_desc type inherits from tdesc_element which has a virtual method, and so GCC worries that target_desc might be used as a base class. The solution is to declare gdbserver's target_desc class as final. This is fine so long as we never intent to inherit from target_desc (in gdbserver). But if we did then we'd want to make target_desc's destructor virtual anyway, so the error above would be resolved, and there wouldn't be an issue. gdb/ChangeLog: * arch/riscv.c (riscv_tdesc_cache): Change map type. (riscv_lookup_target_description): Return pointer out of unique_ptr. * target-descriptions.c (allocate_target_description): Add comment. (target_desc_deleter::operator()): Likewise. * target-descriptions.h (struct target_desc_deleter): Moved to gdbsupport/tdesc.h. (target_desc_up): Likewise. gdbserver/ChangeLog: * tdesc.cc (allocate_target_description): Add header comment. (target_desc_deleter::operator()): New function. * tdesc.h (struct target_desc): Declare as final. gdbsupport/ChangeLog: * tdesc.h (struct target_desc_deleter): Moved here from gdb/target-descriptions.h, extend comment. (target_desc_up): Likewise.
2020-07-17 00:48:12 +08:00
/* See gdbsupport/tdesc.h. */
gdb: Have allocate_target_description return a unique_ptr Update allocate_target_description to return a target_desc_up, a specialisation of unique_ptr. This commit does not attempt to make use of the unique_ptr in the best possible way, in almost all cases we immediately release the pointer from within the unique_ptr and then continue as before. There are a few places where it was easy to handle the unique_ptr, and in these cases I've done that. Everything under gdb/features/* is auto-regenerated. There should be no user visible changes after this commit. gdb/ChangeLog: * arch/aarch32.c (aarch32_create_target_description): Release unique_ptr returned from allocate_target_description. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/amd64.c (amd64_create_target_description): Likewise. * arch/arc.c (arc_create_target_description): Likewise. * arch/arm.c (arm_create_target_description): Likewise. * arch/i386.c (i386_create_target_description): Likewise. * arch/riscv.c (riscv_create_target_description): Update return type. Handle allocate_target_description returning a unique_ptr. (riscv_lookup_target_description): Update to handle unique_ptr. * arch/tic6x.c (tic6x_create_target_description): Release unique_ptr returned from allocate_target_description. * features/microblaze-with-stack-protect.c: Regenerate. * features/microblaze.c: Regenerate. * features/mips-dsp-linux.c: Regenerate. * features/mips-linux.c: Regenerate. * features/mips64-dsp-linux.c: Regenerate. * features/mips64-linux.c: Regenerate. * features/nds32.c: Regenerate. * features/nios2.c: Regenerate. * features/or1k.c: Regenerate. * features/rs6000/powerpc-32.c: Regenerate. * features/rs6000/powerpc-32l.c: Regenerate. * features/rs6000/powerpc-403.c: Regenerate. * features/rs6000/powerpc-403gc.c: Regenerate. * features/rs6000/powerpc-405.c: Regenerate. * features/rs6000/powerpc-505.c: Regenerate. * features/rs6000/powerpc-601.c: Regenerate. * features/rs6000/powerpc-602.c: Regenerate. * features/rs6000/powerpc-603.c: Regenerate. * features/rs6000/powerpc-604.c: Regenerate. * features/rs6000/powerpc-64.c: Regenerate. * features/rs6000/powerpc-64l.c: Regenerate. * features/rs6000/powerpc-7400.c: Regenerate. * features/rs6000/powerpc-750.c: Regenerate. * features/rs6000/powerpc-860.c: Regenerate. * features/rs6000/powerpc-altivec32.c: Regenerate. * features/rs6000/powerpc-altivec32l.c: Regenerate. * features/rs6000/powerpc-altivec64.c: Regenerate. * features/rs6000/powerpc-altivec64l.c: Regenerate. * features/rs6000/powerpc-e500.c: Regenerate. * features/rs6000/powerpc-e500l.c: Regenerate. * features/rs6000/powerpc-isa205-32l.c: Regenerate. * features/rs6000/powerpc-isa205-64l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx64l.c: Regenerate. * features/rs6000/powerpc-vsx32.c: Regenerate. * features/rs6000/powerpc-vsx32l.c: Regenerate. * features/rs6000/powerpc-vsx64.c: Regenerate. * features/rs6000/powerpc-vsx64l.c: Regenerate. * features/rs6000/rs6000.c: Regenerate. * features/rx.c: Regenerate. * features/s390-gs-linux64.c: Regenerate. * features/s390-linux32.c: Regenerate. * features/s390-linux32v1.c: Regenerate. * features/s390-linux32v2.c: Regenerate. * features/s390-linux64.c: Regenerate. * features/s390-linux64v1.c: Regenerate. * features/s390-linux64v2.c: Regenerate. * features/s390-te-linux64.c: Regenerate. * features/s390-tevx-linux64.c: Regenerate. * features/s390-vx-linux64.c: Regenerate. * features/s390x-gs-linux64.c: Regenerate. * features/s390x-linux64.c: Regenerate. * features/s390x-linux64v1.c: Regenerate. * features/s390x-linux64v2.c: Regenerate. * features/s390x-te-linux64.c: Regenerate. * features/s390x-tevx-linux64.c: Regenerate. * features/s390x-vx-linux64.c: Regenerate. * mips-tdep.c (_initialize_mips_tdep): Release unique_ptr returned from allocate_target_description. * target-descriptions.c (allocate_target_description): Update return type. (print_c_tdesc::visit_pre): Release unique_ptr returned from allocate_target_description. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::handle_extended_wait): Release the unique_ptr returned from allocate_target_description. * linux-riscv-low.cc (riscv_target::low_arch_setup): Likewise. * linux-x86-low.cc (tdesc_amd64_linux_no_xml): Change type. (tdesc_i386_linux_no_xml): Change type. (x86_linux_read_description): Borrow pointer from unique_ptr object. (x86_target::get_ipa_tdesc_idx): Likewise. (initialize_low_arch): Likewise. * tdesc.cc (allocate_target_description): Update return type. gdbsupport/ChangeLog: * tdesc.h (allocate_target_description): Update return type.
2020-07-20 21:18:04 +08:00
target_desc_up
2017-09-05 16:54:53 +08:00
allocate_target_description (void)
{
gdb: Have allocate_target_description return a unique_ptr Update allocate_target_description to return a target_desc_up, a specialisation of unique_ptr. This commit does not attempt to make use of the unique_ptr in the best possible way, in almost all cases we immediately release the pointer from within the unique_ptr and then continue as before. There are a few places where it was easy to handle the unique_ptr, and in these cases I've done that. Everything under gdb/features/* is auto-regenerated. There should be no user visible changes after this commit. gdb/ChangeLog: * arch/aarch32.c (aarch32_create_target_description): Release unique_ptr returned from allocate_target_description. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/amd64.c (amd64_create_target_description): Likewise. * arch/arc.c (arc_create_target_description): Likewise. * arch/arm.c (arm_create_target_description): Likewise. * arch/i386.c (i386_create_target_description): Likewise. * arch/riscv.c (riscv_create_target_description): Update return type. Handle allocate_target_description returning a unique_ptr. (riscv_lookup_target_description): Update to handle unique_ptr. * arch/tic6x.c (tic6x_create_target_description): Release unique_ptr returned from allocate_target_description. * features/microblaze-with-stack-protect.c: Regenerate. * features/microblaze.c: Regenerate. * features/mips-dsp-linux.c: Regenerate. * features/mips-linux.c: Regenerate. * features/mips64-dsp-linux.c: Regenerate. * features/mips64-linux.c: Regenerate. * features/nds32.c: Regenerate. * features/nios2.c: Regenerate. * features/or1k.c: Regenerate. * features/rs6000/powerpc-32.c: Regenerate. * features/rs6000/powerpc-32l.c: Regenerate. * features/rs6000/powerpc-403.c: Regenerate. * features/rs6000/powerpc-403gc.c: Regenerate. * features/rs6000/powerpc-405.c: Regenerate. * features/rs6000/powerpc-505.c: Regenerate. * features/rs6000/powerpc-601.c: Regenerate. * features/rs6000/powerpc-602.c: Regenerate. * features/rs6000/powerpc-603.c: Regenerate. * features/rs6000/powerpc-604.c: Regenerate. * features/rs6000/powerpc-64.c: Regenerate. * features/rs6000/powerpc-64l.c: Regenerate. * features/rs6000/powerpc-7400.c: Regenerate. * features/rs6000/powerpc-750.c: Regenerate. * features/rs6000/powerpc-860.c: Regenerate. * features/rs6000/powerpc-altivec32.c: Regenerate. * features/rs6000/powerpc-altivec32l.c: Regenerate. * features/rs6000/powerpc-altivec64.c: Regenerate. * features/rs6000/powerpc-altivec64l.c: Regenerate. * features/rs6000/powerpc-e500.c: Regenerate. * features/rs6000/powerpc-e500l.c: Regenerate. * features/rs6000/powerpc-isa205-32l.c: Regenerate. * features/rs6000/powerpc-isa205-64l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate. * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-htm-vsx64l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx32l.c: Regenerate. * features/rs6000/powerpc-isa207-vsx64l.c: Regenerate. * features/rs6000/powerpc-vsx32.c: Regenerate. * features/rs6000/powerpc-vsx32l.c: Regenerate. * features/rs6000/powerpc-vsx64.c: Regenerate. * features/rs6000/powerpc-vsx64l.c: Regenerate. * features/rs6000/rs6000.c: Regenerate. * features/rx.c: Regenerate. * features/s390-gs-linux64.c: Regenerate. * features/s390-linux32.c: Regenerate. * features/s390-linux32v1.c: Regenerate. * features/s390-linux32v2.c: Regenerate. * features/s390-linux64.c: Regenerate. * features/s390-linux64v1.c: Regenerate. * features/s390-linux64v2.c: Regenerate. * features/s390-te-linux64.c: Regenerate. * features/s390-tevx-linux64.c: Regenerate. * features/s390-vx-linux64.c: Regenerate. * features/s390x-gs-linux64.c: Regenerate. * features/s390x-linux64.c: Regenerate. * features/s390x-linux64v1.c: Regenerate. * features/s390x-linux64v2.c: Regenerate. * features/s390x-te-linux64.c: Regenerate. * features/s390x-tevx-linux64.c: Regenerate. * features/s390x-vx-linux64.c: Regenerate. * mips-tdep.c (_initialize_mips_tdep): Release unique_ptr returned from allocate_target_description. * target-descriptions.c (allocate_target_description): Update return type. (print_c_tdesc::visit_pre): Release unique_ptr returned from allocate_target_description. gdbserver/ChangeLog: * linux-low.cc (linux_process_target::handle_extended_wait): Release the unique_ptr returned from allocate_target_description. * linux-riscv-low.cc (riscv_target::low_arch_setup): Likewise. * linux-x86-low.cc (tdesc_amd64_linux_no_xml): Change type. (tdesc_i386_linux_no_xml): Change type. (x86_linux_read_description): Borrow pointer from unique_ptr object. (x86_target::get_ipa_tdesc_idx): Likewise. (initialize_low_arch): Likewise. * tdesc.cc (allocate_target_description): Update return type. gdbsupport/ChangeLog: * tdesc.h (allocate_target_description): Update return type.
2020-07-20 21:18:04 +08:00
return target_desc_up (new target_desc ());
2017-09-05 16:54:53 +08:00
}
gdb/riscv: delete target descriptions when gdb exits It was pointed out on IRC that the RISC-V target allocates target descriptions and stores them in a global map, and doesn't delete these target descriptions when GDB shuts down. This isn't a particular problem, the total number of target descriptions we can create is very limited so creating these on demand and holding them for the entire run on GDB seems reasonable. However, not deleting these objects on GDB exit means extra warnings are printed from tools like valgrind, and the address sanitiser, making it harder to spot real issues. As it's reasonably easy to have GDB correctly delete these objects on exit, lets just do that. I started by noticing that we already have a target_desc_up type, a wrapper around unique_ptr that calls a function that will correctly delete target descriptions, so I want to use that, but.... ...that type is declared in gdb/target-descriptions.h. If I try to include that file in gdb/arch/riscv.c I run into a problem, that file is compiled into both GDB and GDBServer. OK, I could guard the include with #ifdef, but surely we can do better. So then I decided to move the target_desc_up type into gdbsupport/tdesc.h, this is the interface file for generic code shared between GDB and GDBserver (relating to target descriptions). The actual implementation for the delete function still lives in gdb/target-description.c, but now gdb/arch/riscv.c can see the declaration. Problem solved.... ... but, though RISC-V doesn't use it I've now exposed the target_desc_up type to gdbserver, so in future someone _might_ start using it, which is fine, except right now there's no definition of the delete function - remember the delete I used is only defined in GDB code. No problem, I add an implementation of the delete operator into gdbserver/tdesc.cc, and all is good..... except.... I start getting this error from GCC: tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor] Which is caused because gdbserver's target_desc type inherits from tdesc_element which has a virtual method, and so GCC worries that target_desc might be used as a base class. The solution is to declare gdbserver's target_desc class as final. This is fine so long as we never intent to inherit from target_desc (in gdbserver). But if we did then we'd want to make target_desc's destructor virtual anyway, so the error above would be resolved, and there wouldn't be an issue. gdb/ChangeLog: * arch/riscv.c (riscv_tdesc_cache): Change map type. (riscv_lookup_target_description): Return pointer out of unique_ptr. * target-descriptions.c (allocate_target_description): Add comment. (target_desc_deleter::operator()): Likewise. * target-descriptions.h (struct target_desc_deleter): Moved to gdbsupport/tdesc.h. (target_desc_up): Likewise. gdbserver/ChangeLog: * tdesc.cc (allocate_target_description): Add header comment. (target_desc_deleter::operator()): New function. * tdesc.h (struct target_desc): Declare as final. gdbsupport/ChangeLog: * tdesc.h (struct target_desc_deleter): Moved here from gdb/target-descriptions.h, extend comment. (target_desc_up): Likewise.
2020-07-17 00:48:12 +08:00
/* See gdbsupport/tdesc.h. */
void
target_desc_deleter::operator() (struct target_desc *target_desc) const
{
delete target_desc;
}
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
#ifndef IN_PROCESS_AGENT
[GDBserver] Centralize tdesc for i386-linux tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this patch adds a new function i386_linux_read_description to return the right tdesc according to xcr0. i386_linux_read_description is quite similar to the counterpart in GDB, and the following patch will share the duplicated code, so this patch adds arch/tdesc.h includes the declarations of various tdesc apis which are used by the shared code. The generated c feature files can include arch/tdesc.h only. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_tgtobj): Append linux-x86-tdesc.o. (ipa_obj): Likewise. * linux-i386-ipa.c: Include common/x86-xstate.h (get_ipa_tdesc): Call i386_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_XXX functions, call initialize_low_tdesc instead. * linux-x86-low.c (x86_linux_read_description): Call i386_linux_read_description. (initialize_low_arch): Don't call init_registers_i386_XXX functions, call initialize_low_tdesc. * linux-x86-tdesc.c: New file. * linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST. (i386_get_ipa_tdesc_idx): Declare. (i386_get_ipa_tdesc): Declare. (initialize_low_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h: New file. * regformats/regdat.sh: Generate code using tdesc_create_reg. * target-descriptions.c: Update comments. * target-descriptions.h: Include "arch/tdesc.h". Remove the declarations. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated.
2017-09-05 16:54:53 +08:00
static const struct target_desc default_description {};
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
void
copy_target_description (struct target_desc *dest,
const struct target_desc *src)
{
dest->reg_defs = src->reg_defs;
dest->expedite_regs = src->expedite_regs;
dest->registers_size = src->registers_size;
dest->xmltarget = src->xmltarget;
}
const struct target_desc *
current_target_desc (void)
{
Rename current_inferior as current_thread in gdbserver GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise.
2014-09-10 17:37:11 +08:00
if (current_thread == NULL)
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
return &default_description;
return current_process ()->tdesc;
}
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
gdb: Print compatible information within print_xml_feature The gdbsupport directory contains a helper class print_xml_feature that is shared between gdb and gdbserver. This class is used for printing an XML representation of a target_desc object. Currently this class doesn't have the ability to print the <compatible> entities that can appear within a target description, I guess no targets have needed that functionality yet. The print_xml_feature classes API is based around operating on the target_desc class, however, the sharing between gdb and gdbserver is purely textural, we rely on their being a class called target_desc in both gdb and gdbserver, but there is no shared implementation. We then have a set of functions declared that operate on an object of type target_desc, and again these functions have completely separate implementations. Currently then the gdb version of target_desc contains a vector of bfd_arch_info pointers which represents the compatible entries from a target description. The gdbserver version of target_desc has no such information. Further, the gdbserver code doesn't seem to include the bfd headers, and so doesn't know about the bfd types. I was reluctant to include the bfd headers into gdbserver just so I can reference the compatible information, which isn't (currently) even needed in gdbserver. So, the approach I take in this patch is to wrap the compatible information into a new helper class. This class is declared in the gdbsupport library, but implemented separately in both gdb and gdbserver. In gdbserver the class is empty. The compatible information within the gdbserver is an empty list, of empty classes. In gdb the class contains a pointer to the bfd_arch_info object. With this in place we can now add support to print_xml_feature for printing the compatible information if it is present. In the gdbserver code this will never happen, as the gdbserver never has any compatible information. But in gdb, this code will trigger when appropriate. gdb/ChangeLog: * target-descriptions.c (class tdesc_compatible_info): New class. (struct target_desc): Change type of compatible vector. (tdesc_compatible_p): Update for change in type of target_desc::compatible. (tdesc_compatible_info_list): New function. (tdesc_compatible_info_arch_name): New function. (tdesc_add_compatible): Update for change in type of target_desc::compatible. (print_c_tdesc::visit_pre): Likewise. gdbserver/ChangeLog: * tdesc.cc (struct tdesc_compatible_info): New struct. (tdesc_compatible_info_list): New function. (tdesc_compatible_info_arch_name): New function. gdbsupport/ChangeLog: * tdesc.cc (print_xml_feature::visit_pre): Print compatible information. * tdesc.h (struct tdesc_compatible_info): Declare new struct. (tdesc_compatible_info_up): New typedef. (tdesc_compatible_info_list): Declare new function. (tdesc_compatible_info_arch_name): Declare new function.
2020-06-12 05:36:29 +08:00
/* An empty structure. */
struct tdesc_compatible_info { };
/* See gdbsupport/tdesc.h. */
const std::vector<tdesc_compatible_info_up> &
tdesc_compatible_info_list (const target_desc *target_desc)
{
static std::vector<tdesc_compatible_info_up> empty;
return empty;
}
/* See gdbsupport/tdesc.h. */
const char *
tdesc_compatible_info_arch_name (const tdesc_compatible_info_up &c_info)
{
return nullptr;
}
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
2017-09-05 16:54:53 +08:00
const char *
tdesc_architecture_name (const struct target_desc *target_desc)
{
return target_desc->arch;
}
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
void
set_tdesc_architecture (struct target_desc *target_desc,
const char *name)
{
target_desc->arch = xstrdup (name);
}
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
2017-09-05 16:54:53 +08:00
const char *
tdesc_osabi_name (const struct target_desc *target_desc)
{
return target_desc->osabi;
}
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
void
set_tdesc_osabi (struct target_desc *target_desc, const char *name)
{
target_desc->osabi = xstrdup (name);
}
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
const char *
tdesc_get_features_xml (const target_desc *tdesc)
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
{
/* Either .xmltarget or .features is not NULL. */
gdb_assert (tdesc->xmltarget != NULL
|| (!tdesc->features.empty ()
&& tdesc->arch != NULL));
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
if (tdesc->xmltarget == NULL)
{
std::string buffer ("@");
print_xml_feature v (&buffer);
tdesc->accept (v);
Dynamically composite xml in reply to GDB GDBserver still uses pre-generated target descriptions in order to reply to GDB's query on target description (see xml-builtin-generated.c in GDBserver build directory). This patch teaches GDBserver to create XML contents according to the target descriptions rather than using pre-generated ones. First, change target feature c files to pass the feature xml file name to tdesc_create_feature, so that target description in GDBserver can record them, and create XML contents from these features in buffer, like ... <xi:include href="$FEATURE1_XML_NAME"/> <xi:include href="$FEATURE2_XML_NAME"/> ... and send this buffer back to GDB. Note that this patch reuses target_desc.xmltarget a little bit, which is to hold the XML contents dynamically generated in tdesc_get_features_xml. However, it is not xfree'ed in ~target_desc, because we can't tell it is from xstrdup or a literal string. Since we don't delete target_desc, there is no memory leak yet. After we change all target descriptions to the new style, target_desc.xmltarget is from xstrdup, then, we can safely xfree it in ~target_desc. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h (tdesc_create_feature): Add an argument xml. * target-descriptions.c (tdesc_create_feature): Likewise, and adjust code. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * linux-x86-tdesc.c: Don't include <inttypes.h>. (i386_linux_read_description) [!IN_PROCESS_AGENT]: Call set_tdesc_architecture and set_tdesc_osabi. Remove code setting .xmltarget. * server.c (get_features_xml): Call tdesc_get_features_xml. * tdesc.c (set_tdesc_architecture): New function. (set_tdesc_osabi): New function. (tdesc_get_features_xml): New function. (tdesc_create_feature): Add an argument. * tdesc.h (struct target_desc) <features>: New field. <arch, osabi>: New field. (~target_desc): xfree features, arch, and osabi. (target_desc::oerator==): Don't compare .xmltarget. [!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare. (set_tdesc_osabi): Likewise. (tdesc_get_features_xml): Likewise.
2017-09-05 16:54:53 +08:00
tdesc->xmltarget = xstrdup (buffer.c_str ());
}
return tdesc->xmltarget;
}
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 18:46:59 +08:00
#endif
[GDBserver] Centralize tdesc for i386-linux tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this patch adds a new function i386_linux_read_description to return the right tdesc according to xcr0. i386_linux_read_description is quite similar to the counterpart in GDB, and the following patch will share the duplicated code, so this patch adds arch/tdesc.h includes the declarations of various tdesc apis which are used by the shared code. The generated c feature files can include arch/tdesc.h only. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_tgtobj): Append linux-x86-tdesc.o. (ipa_obj): Likewise. * linux-i386-ipa.c: Include common/x86-xstate.h (get_ipa_tdesc): Call i386_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_XXX functions, call initialize_low_tdesc instead. * linux-x86-low.c (x86_linux_read_description): Call i386_linux_read_description. (initialize_low_arch): Don't call init_registers_i386_XXX functions, call initialize_low_tdesc. * linux-x86-tdesc.c: New file. * linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST. (i386_get_ipa_tdesc_idx): Declare. (i386_get_ipa_tdesc): Declare. (initialize_low_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h: New file. * regformats/regdat.sh: Generate code using tdesc_create_reg. * target-descriptions.c: Update comments. * target-descriptions.h: Include "arch/tdesc.h". Remove the declarations. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated.
2017-09-05 16:54:53 +08:00
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
/* See gdbsupport/tdesc.h. */
[GDBserver] Centralize tdesc for i386-linux tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this patch adds a new function i386_linux_read_description to return the right tdesc according to xcr0. i386_linux_read_description is quite similar to the counterpart in GDB, and the following patch will share the duplicated code, so this patch adds arch/tdesc.h includes the declarations of various tdesc apis which are used by the shared code. The generated c feature files can include arch/tdesc.h only. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_tgtobj): Append linux-x86-tdesc.o. (ipa_obj): Likewise. * linux-i386-ipa.c: Include common/x86-xstate.h (get_ipa_tdesc): Call i386_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_XXX functions, call initialize_low_tdesc instead. * linux-x86-low.c (x86_linux_read_description): Call i386_linux_read_description. (initialize_low_arch): Don't call init_registers_i386_XXX functions, call initialize_low_tdesc. * linux-x86-tdesc.c: New file. * linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST. (i386_get_ipa_tdesc_idx): Declare. (i386_get_ipa_tdesc): Declare. (initialize_low_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h: New file. * regformats/regdat.sh: Generate code using tdesc_create_reg. * target-descriptions.c: Update comments. * target-descriptions.h: Include "arch/tdesc.h". Remove the declarations. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated.
2017-09-05 16:54:53 +08:00
struct tdesc_feature *
Remove xml file references from target descriptions gdb/ * common/tdesc.h (tdesc_create_feature): Remove xml filename parameter. * features/aarch64-core.c (create_feature_aarch64_core): Regenerate. * features/aarch64-fpu.c (create_feature_aarch64_fpu): Likewise. * features/i386/32bit-avx.c (create_feature_i386_32bit_avx): Likewise. * features/i386/32bit-avx512.c (create_feature_i386_32bit_avx512): Likewise. * features/i386/32bit-core.c (create_feature_i386_32bit_core): Likewise. * features/i386/32bit-linux.c (create_feature_i386_32bit_linux): Likewise. * features/i386/32bit-mpx.c (create_feature_i386_32bit_mpx): Likewise. * features/i386/32bit-pkeys.c (create_feature_i386_32bit_pkeys): Likewise. * features/i386/32bit-sse.c (create_feature_i386_32bit_sse): Likewise. * features/i386/64bit-avx.c (create_feature_i386_64bit_avx): Likewise. * features/i386/64bit-avx512.c (create_feature_i386_64bit_avx512): Likewise. * features/i386/64bit-core.c (create_feature_i386_64bit_core): Likewise. * features/i386/64bit-linux.c (create_feature_i386_64bit_linux): Likewise. * features/i386/64bit-mpx.c (create_feature_i386_64bit_mpx): Likewise. * features/i386/64bit-pkeys.c (create_feature_i386_64bit_pkeys): Likewise. * features/i386/64bit-segments.c (create_feature_i386_64bit_segments): Likewise. * features/i386/64bit-sse.c (create_feature_i386_64bit_sse): Likewise. * features/i386/x32-core.c (create_feature_i386_x32_core): Likewise. * features/tic6x-c6xp.c (create_feature_tic6x_c6xp): Likewise. * features/tic6x-core.c (create_feature_tic6x_core): Likewise. * features/tic6x-gp.c (create_feature_tic6x_gp): Likewise. * target-descriptions.c: In generated code, don't pass xml filename. gdbserver/ * tdesc.c: Remove xml parameter.
2018-04-19 03:49:37 +08:00
tdesc_create_feature (struct target_desc *tdesc, const char *name)
[GDBserver] Centralize tdesc for i386-linux tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this patch adds a new function i386_linux_read_description to return the right tdesc according to xcr0. i386_linux_read_description is quite similar to the counterpart in GDB, and the following patch will share the duplicated code, so this patch adds arch/tdesc.h includes the declarations of various tdesc apis which are used by the shared code. The generated c feature files can include arch/tdesc.h only. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_tgtobj): Append linux-x86-tdesc.o. (ipa_obj): Likewise. * linux-i386-ipa.c: Include common/x86-xstate.h (get_ipa_tdesc): Call i386_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_XXX functions, call initialize_low_tdesc instead. * linux-x86-low.c (x86_linux_read_description): Call i386_linux_read_description. (initialize_low_arch): Don't call init_registers_i386_XXX functions, call initialize_low_tdesc. * linux-x86-tdesc.c: New file. * linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST. (i386_get_ipa_tdesc_idx): Declare. (i386_get_ipa_tdesc): Declare. (initialize_low_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h: New file. * regformats/regdat.sh: Generate code using tdesc_create_reg. * target-descriptions.c: Update comments. * target-descriptions.h: Include "arch/tdesc.h". Remove the declarations. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated.
2017-09-05 16:54:53 +08:00
{
Remove xml file references from target descriptions gdb/ * common/tdesc.h (tdesc_create_feature): Remove xml filename parameter. * features/aarch64-core.c (create_feature_aarch64_core): Regenerate. * features/aarch64-fpu.c (create_feature_aarch64_fpu): Likewise. * features/i386/32bit-avx.c (create_feature_i386_32bit_avx): Likewise. * features/i386/32bit-avx512.c (create_feature_i386_32bit_avx512): Likewise. * features/i386/32bit-core.c (create_feature_i386_32bit_core): Likewise. * features/i386/32bit-linux.c (create_feature_i386_32bit_linux): Likewise. * features/i386/32bit-mpx.c (create_feature_i386_32bit_mpx): Likewise. * features/i386/32bit-pkeys.c (create_feature_i386_32bit_pkeys): Likewise. * features/i386/32bit-sse.c (create_feature_i386_32bit_sse): Likewise. * features/i386/64bit-avx.c (create_feature_i386_64bit_avx): Likewise. * features/i386/64bit-avx512.c (create_feature_i386_64bit_avx512): Likewise. * features/i386/64bit-core.c (create_feature_i386_64bit_core): Likewise. * features/i386/64bit-linux.c (create_feature_i386_64bit_linux): Likewise. * features/i386/64bit-mpx.c (create_feature_i386_64bit_mpx): Likewise. * features/i386/64bit-pkeys.c (create_feature_i386_64bit_pkeys): Likewise. * features/i386/64bit-segments.c (create_feature_i386_64bit_segments): Likewise. * features/i386/64bit-sse.c (create_feature_i386_64bit_sse): Likewise. * features/i386/x32-core.c (create_feature_i386_x32_core): Likewise. * features/tic6x-c6xp.c (create_feature_tic6x_c6xp): Likewise. * features/tic6x-core.c (create_feature_tic6x_core): Likewise. * features/tic6x-gp.c (create_feature_tic6x_gp): Likewise. * target-descriptions.c: In generated code, don't pass xml filename. gdbserver/ * tdesc.c: Remove xml parameter.
2018-04-19 03:49:37 +08:00
struct tdesc_feature *new_feature = new tdesc_feature (name);
tdesc->features.emplace_back (new_feature);
return new_feature;
[GDBserver] Centralize tdesc for i386-linux tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this patch adds a new function i386_linux_read_description to return the right tdesc according to xcr0. i386_linux_read_description is quite similar to the counterpart in GDB, and the following patch will share the duplicated code, so this patch adds arch/tdesc.h includes the declarations of various tdesc apis which are used by the shared code. The generated c feature files can include arch/tdesc.h only. gdb/gdbserver: 2017-09-05 Yao Qi <yao.qi@linaro.org> * configure.srv (srv_tgtobj): Append linux-x86-tdesc.o. (ipa_obj): Likewise. * linux-i386-ipa.c: Include common/x86-xstate.h (get_ipa_tdesc): Call i386_linux_read_description. (initialize_low_tracepoint): Don't call init_registers_XXX functions, call initialize_low_tdesc instead. * linux-x86-low.c (x86_linux_read_description): Call i386_linux_read_description. (initialize_low_arch): Don't call init_registers_i386_XXX functions, call initialize_low_tdesc. * linux-x86-tdesc.c: New file. * linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST. (i386_get_ipa_tdesc_idx): Declare. (i386_get_ipa_tdesc): Declare. (initialize_low_tdesc): Declare. gdb: 2017-09-05 Yao Qi <yao.qi@linaro.org> * arch/tdesc.h: New file. * regformats/regdat.sh: Generate code using tdesc_create_reg. * target-descriptions.c: Update comments. * target-descriptions.h: Include "arch/tdesc.h". Remove the declarations. * features/i386/32bit-avx.c: Re-generated. * features/i386/32bit-avx512.c: Re-generated. * features/i386/32bit-core.c: Re-generated. * features/i386/32bit-linux.c: Re-generated. * features/i386/32bit-mpx.c: Re-generated. * features/i386/32bit-pkeys.c: Re-generated. * features/i386/32bit-sse.c: Re-generated.
2017-09-05 16:54:53 +08:00
}
/* See gdbsupport/tdesc.h. */
bool
tdesc_contains_feature (const target_desc *tdesc, const std::string &feature)
{
gdb_assert (tdesc != nullptr);
for (const tdesc_feature_up &f : tdesc->features)
{
if (f->name == feature)
return true;
}
return false;
}