binutils-gdb/bfd/ChangeLog

2848 lines
114 KiB
Plaintext
Raw Normal View History

Fri Mar 25 11:44:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* hosts/sysv4.h (HAVE_PROCFS): Add comments about ptx4.
* config/sysv4.mh: Add comment.
* config/symmetry.mh: Change comment.
* configure.host: Use sysv4, not symmetry, for i[34]86-sequent-sysv4*.
Fri Mar 25 17:10:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1994-03-26 06:37:55 +08:00
Changes to support linker relaxing of embedded MIPS PIC code to
use a five instruction sequence for function calls which are out of
1994-03-26 06:37:55 +08:00
range of the bal instruction.
* libecoff.h (struct ecoff_section_tdata): Define.
(ecoff_section_data): Define.
(ecoff_bfd_relax_section): Don't define.
* ecoff.c (ecoff_final_link_debug_accumulate): Don't read or free
the debugging information if it has already been read.
(ecoff_indirect_link_order): Handle _cooked_size being different
from _raw_size. Don't reread the contents or the relocs if they
have already been read in.
* coff-mips.c (mips_howto_table): Change bitsize of PCREL16 from
18 to 16.
(PCREL16_EXPANSION_ADJUSTMENT): Define.
(mips_relocate_refhi): Take adjust argument.
(mips_relocate_section): Handle reloc offsets stored in section
used_by_bfd field. Call mips_relax_pcrel16 to handle details of
expanding an out of range PCREL16. Keep trace of adjustments
required by expansions. Set s and unset h when converting a reloc
from undefined to section. Change handling of PC relative relocs:
if against a section, they are correct in the object file, if
against an external symbol they are pcrel_offset.
(mips_relax_section): New function.
(mips_relax_pcrel16): New function.
(ecoff_bfd_relax_section): Define.
* coff-alpha.c (ecoff_bfd_relax_section): Define.
* ecofflink.c (bfd_ecoff_debug_accumulate): Handle adjustments
built by mips_relax_section when writing out addresses.
* elf32-mips.c (mips_elf_read_ecoff_info): Clear adjust field.
* aoutx.h (NAME(aout,find_nearest_line)): The caller expects
functionname_ptr to be set to a symbol name, so prepend
symbol_leading_char.
Thu Mar 24 11:33:46 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* coff-h8300.c (h8300_reloc16_extra_cases): Add relaxing info
for 16bit relative branches.
* coff-h8500.c (r_high8, r_low16, r_high16): Don't complain on
overflow.
Thu Mar 24 09:21:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_bfd_prep_for_ar_write): Ignore non-SOM objects.
(som_bfd_ar_write_symbol_stuff, som_write_armap): Likewise.
Wed Mar 23 14:29:31 1994 David J. Mackenzie (djm@rtl.cygnus.com)
* netbsd386.c (N_SET_FLAGS): Delete the old definition.
Clean up the relaxing code for the new linker. * targets.c (_bfd_relax_section): Take boolean *again argument rather than asymbol list. * bfd.c (bfd_relax_section): Change name of fourth argument from symbols to again. * reloc.c (bfd_generic_relax_section): Take boolean *again argument rather than asymbol list. Always return true. * bout.c: Include genlink.h. (aligncode, perform_slip): Declare. (perform_slip): Take BFD argument rather than asymbol list. Changed all callers. Get the symbols from the BFD. Change the hash table entry value as well as the symbol value. (abs32code): Take BFD argument rather than asymbol list. Changed all callers. (aligncode): Likewise. (b_out_relax_section): Take boolean *again argument rather than asymbol list. Only return false if an error occurred. Set *again to false. Get symbols from BFD. * reloc16.c: Include genlink.h. (bfd_perform_slip): Take BFD argument rather than asymbol list. Get the symbols from the BFD. Change the hash table entry value as well as the symbol value. (bfd_coff_reloc16_relax_section): Take boolean *again argument rather than asymbol list. Only return false if an error occurred. Set *again to false. Get symbols from BFD. * coffcode.h (bfd_coff_backend_data): Change _bfd_coff_reloc16_estimate to take BFD argument rather than asymbol list. (bfd_coff_reloc16_estimate): Corresponding change. (dummy_reloc16_estimate): Corresponding change. * libcoff-in.h (bfd_coff_reloc16_relax_section): Change declaration to take boolean * rather than asymbol list. (bfd_perform_slip): Change declaration to take BFD rather than asymbol list. * coff-h8300.c (h300_reloc16_estimate): Take BFD argument rather than asymbol list. Changed calls to bfd_perform_slip. * bfd-in2.h: Rebuilt. * libbfd.h: Rebuilt. * libcoff.h: Rebuilt. * Makefile.in: Rebuilt dependencies.
1994-03-24 04:21:06 +08:00
Wed Mar 23 14:58:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Clean up the relaxing code for the new linker.
* targets.c (_bfd_relax_section): Take boolean *again argument
rather than asymbol list.
* bfd.c (bfd_relax_section): Change name of fourth argument from
symbols to again.
* reloc.c (bfd_generic_relax_section): Take boolean *again
argument rather than asymbol list. Always return true.
* bout.c: Include genlink.h.
(aligncode, perform_slip): Declare.
(perform_slip): Take BFD argument rather than asymbol list.
Changed all callers. Get the symbols from the BFD. Change the
hash table entry value as well as the symbol value.
(abs32code): Take BFD argument rather than asymbol list. Changed
all callers.
(aligncode): Likewise.
(b_out_relax_section): Take boolean *again argument rather than
asymbol list. Only return false if an error occurred. Set *again
to false. Get symbols from BFD.
* reloc16.c: Include genlink.h.
(bfd_perform_slip): Take BFD argument rather than asymbol list.
Get the symbols from the BFD. Change the hash table entry value
as well as the symbol value.
(bfd_coff_reloc16_relax_section): Take boolean *again argument
rather than asymbol list. Only return false if an error occurred.
Set *again to false. Get symbols from BFD.
* coffcode.h (bfd_coff_backend_data): Change
_bfd_coff_reloc16_estimate to take BFD argument rather than
asymbol list.
(bfd_coff_reloc16_estimate): Corresponding change.
(dummy_reloc16_estimate): Corresponding change.
* libcoff-in.h (bfd_coff_reloc16_relax_section): Change
declaration to take boolean * rather than asymbol list.
(bfd_perform_slip): Change declaration to take BFD rather than
asymbol list.
* coff-h8300.c (h300_reloc16_estimate): Take BFD argument rather
than asymbol list. Changed calls to bfd_perform_slip.
* bfd-in2.h: Rebuilt.
* libbfd.h: Rebuilt.
* libcoff.h: Rebuilt.
* Makefile.in: Rebuilt dependencies.
* genlink.h (_bfd_generic_link_get_symbols): Define.
(_bfd_generic_link_get_symcount): Define.
* linker.c (generic_link_read_symbols): New function.
(generic_link_add_object_symbols): Use it. Use
_bfd_generic_link_get_symbols and _bfd_generic_link_get_symcount
to get the symbols from the BFD.
(generic_link_check_archive_element): Likewise.
(_bfd_generic_final_link): Likewise.
(_bfd_generic_link_output_symbols): Likewise.
(default_indirect_link_order): Likewise.
(generic_link_add_symbol_list): Store pointer to hash table entry
in asymbol udata field.
Tue Mar 22 13:09:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coff-mips.c (mips_howto_table): Add entry for new MIPS_R_PCREL16
reloc, used in embedded PIC code.
(mips_adjust_reloc_in): Change sanity check to permit new reloc.
(mips_bfd_reloc_type_lookup): Turn BFD_RELOC_16_PCREL_S2 into
MIPS_R_PCREL16.
* elf32-mips.c (mips_elf_final_link): Account for link_order
relocs when allocating space for relocations. Set SEC_RELOC flag
for any section which has relocs. Handle link_order relocs in
link_order loop. Use _bfd_generic_link_add_symbols_collect for
add_symbls entry point.
* linker.c (_bfd_generic_final_link): Set reloc_count to 0 before
counting relocs. Set SEC_RELOC flag for any section which has
relocs.
* linker.c (_bfd_default_link_order): Handle bfd_data_link_order.
* linker.c (_bfd_generic_link_add_symbols): Just call
generic_link_add_symbols.
(_bfd_generic_link_add_symbols_collect): New function, like
_bfd_generic_link_add_symbols but also collect constructors and
destructors by name as collect2 does.
(generic_link_add_symbols): New function, like old
_bfd_generic_link_add_symbols but with collect argument.
(generic_link_add_object_symbols): Take collect argument.
(generic_link_check_archive_element_no_collect): New function.
(generic_link_check_archive_element_collect): New function.
(generic_link_check_archive_element): Take collect argument.
(generic_link_add_symbol_list): Take collect argument.
(_bfd_generic_link_add_one_symbol): Rename constructor argument to
collect.
* libbfd-in.h (_bfd_generic_link_add_symbols_collect): Declare.
* libbfd.h: Rebuilt.
Tue Mar 22 10:04:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* archive.c (bfd_construct_extended_name_table): Use ar_padchar
for first character in an extended name.
(_bfd_write_archive_contents): If ar_padchar == '/', then use
"//" as the name of the special archive member holding the
extended name table.
Support for link_order types which generate relocs in order to support -Ur in the linker. * linker.c (generic_link_add_symbol_list): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (_bfd_generic_link_add_one_symbol): Remove bitsize argument. Don't pass bitsize to constructor call back. Pass BFD_RELOC_CTOR instead of bitsize to add_to_set call back. (_bfd_generic_final_link): Account for link_order relocs when allocating space for relocations. Handle them in link_order loop. (_bfd_generic_reloc_link_order): New function. (_bfd_default_link_order): If a reloc_link_order is seen here, abort. (_bfd_count_link_order_relocs): New function. * libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize argument from declaration. (_bfd_generic_reloc_link_order): Declare. (_bfd_count_link_order_relocs): Declare. * libbfd.h: Rebuilt. * aoutx.h (aout_link_add_symbols): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (NAME(aout,final_link)): Account for link_order relocs when allocating space for relocations. Handle them after handling all input BFDs. (aout_link_reloc_link_order): New function. * ecoff.c (ecoff_link_add_externals): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (ecoff_bfd_final_link): Account for link_order relocs when allocating space for relocations. Handle them in link_order loop. (ecoff_link_write_external): Set the storage class of a defined linker created symbol based on the section it is in. Correct bfd_link_hash_weak case to use .sc rather than .st. (ecoff_reloc_link_order): New function. * coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle BFD_RELOC_CTOR. * coff-mips.c (mips_bfd_reloc_type_lookup): Likewise.
1994-03-22 08:27:05 +08:00
Mon Mar 21 12:28:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Support for link_order types which generate relocs in order to
support -Ur in the linker.
* linker.c (generic_link_add_symbol_list): Remove bitsize argument
from call to _bfd_generic_link_add_one_symbol.
(_bfd_generic_link_add_one_symbol): Remove bitsize argument.
Don't pass bitsize to constructor call back. Pass BFD_RELOC_CTOR
instead of bitsize to add_to_set call back.
(_bfd_generic_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(_bfd_generic_reloc_link_order): New function.
(_bfd_default_link_order): If a reloc_link_order is seen here,
abort.
(_bfd_count_link_order_relocs): New function.
* libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize
argument from declaration.
(_bfd_generic_reloc_link_order): Declare.
(_bfd_count_link_order_relocs): Declare.
* libbfd.h: Rebuilt.
* aoutx.h (aout_link_add_symbols): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(NAME(aout,final_link)): Account for link_order relocs when
allocating space for relocations. Handle them after handling all
input BFDs.
(aout_link_reloc_link_order): New function.
* ecoff.c (ecoff_link_add_externals): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(ecoff_bfd_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(ecoff_link_write_external): Set the storage class of a defined
linker created symbol based on the section it is in. Correct
bfd_link_hash_weak case to use .sc rather than .st.
(ecoff_reloc_link_order): New function.
* coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle
BFD_RELOC_CTOR.
* coff-mips.c (mips_bfd_reloc_type_lookup): Likewise.
* sunos.c (sunos_read_dynamic_info): Remove unused locals dynsym
and buf.
* cisco-core.c (cisco_core_file_p): Only pass one argument to
bfd_zmalloc. Free a pointer, not a union.
(cisco_bfd_is_local_label): Correct cast from asection to asymbol.
Sun Mar 20 09:24:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* bfd/som.c (som_begin_writing): Fix thinko (off by one error).
* som.c (bfd_section_from_som_symbol): Only to do the value
comparison for function symbols within executables.
* som.c (bfd_section_from_som_symbol): Renamed from
som_section_from_subspace_index. Pass in a native SOM symbol.
For executables, iterate through the sections to find out
which contains the symbol's address rather than using the
symbol_info field. (symbol_info has a different meaning for
dynamicly linked executables.)
* trad-core.c (trad_unix_core_file_p): Don't pass abfd to
bfd_zmalloc.
* som.c (som_begin_writing): Fix braino (one call to align
space/subspace data was done unconditionally rather than
just for executables.)
* som.c (som_begin_writing): Align text in all executables to
make HPUX kernel happy. Fixes strip/objcopy for shared
executables.
Sat Mar 19 07:06:59 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_begin_writing): Account for alignment needs of
subspaces too when writing executables. Never request a negative
bss size. Fixes some problems with demand paged executables,
still having problems with pure executables and shared executables.
Fri Mar 18 19:12:47 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* trad-core.c (trad_unix_core_file_p): Call bfd_zmalloc not
bfd_zalloc for rawptr, because later on we may call free, not
bfd_release, on it.
* bfd.c (struct _bfd): Add cisco_core_struct to tdata union.
* libbfd.c (bfd_read, bfd_seek): Add comments regarding errors.
* cisco-core.c: New file.
* Makefile.in: Change accordingly.
* configure.in: Recognize cisco_core_vec.
* config/m68k-aout.mt (SELECT_VECS): Add cisco_core_vec.
* targets.c: Add cisco_core_vec.
* bfd-in2.h: Rebuilt.
Fri Mar 18 18:13:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.h (som_copyable_section_data_struct): New structure
containing all the private section information which needs
to be copied from input section to output section during
objcopy or strip.
(som_section_data_struct): Remove several fields now in
som_copyable_section_data_struct. Make the space and
subspace dictionaries be pointers (to save space when
only reading objects).
* som.c (bfd_som_set_section_attributes): Now returns a boolean;
some references changed. Allocate a copyable data stucture if
none exists. Store info into the copyable data structure.
(bfd_som_set_subsection_attributes): Likewise.
(som_is_space, som_is_subspace, som_is_container): New functions.
Use these instead of directly accessing private data.
(som_prep_headers): Allocate space and subspace headers here.
Fill in some fields in the space/subspace headers from the
copyable data.
(som_bfd_copy_private_section_data): Only copy the stuff
that we really need to make objcopy and strip work. Allocate
the copy_data structure for the output bfd before copying.
* som.h (struct som_exec_data): New structure to hold exec
info that must be preserved when running objcopy/strip.
(struct somdata): Add new "exec_data" field and accessor
macro. Add some comments on how the various fields are used.
(som_section_data_struct): Make is_space and is_subspace bitfields.
Delete unused subspace_index. All references now use the
target_index field within the section structure itself.
* som.c (make_unique_section): Delete unused declaration.
(som_bfd_copy_private_bfd_data): New function.
(som_object_setup): Allocate space for and save exec information
that needs to be copied during objcopy/strip.
(som_mkobject): Do not allocate space for a file header here.
It is not used when only reading SOM objects.
(som_prep_headers): Allocate space for and attach a file header
to the output bfd. For executables, use the saved system_id
value rather than trying to guess the right value. Do not abort
wwhen setting file_hdr->entry* for executables.
(som_begin_writing): For executables, set the exec_entry and
exec_flags fields.
(som_copy_private_backend_section_data): Always return a value.
* libhppa.h (PA_PAGESIZE): Define.
* som.c (SOM_ALIGN): Define.
(som_begin_writing): If writing an executable, initialize all
fields in the exec header to zero. Update fields in the exec
header as sizes of loadable subspaces are computed. Carefully
preserve alignments when building executables. Actually write the
exec after all the fields are filled in.
* Better long-filename handling. Reads SOM ABI compliant extended
names, but doesn't quite write compliant extended names yet.
* som.c (som_slurp_extended_name_table): Delete function. The
generic code will handle things correctly.
(som_slurp_armap): Seek to the beginning of the next member.
(normalize): New function.
(som_bfd_ar_write_symbol_stuff): Take the size of the extended
name table into account when computing the file offsets in the
SOM dictionary. Make sure to align to an even boundary.
(som_write_armap): Initialize the checksum to zero.
(ar_maxchars): Fix. Opps.
Fri Mar 18 20:35:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* aoutx.h (reloc_type_lookup): Handle BFD_RELOC_CTOR on a 64-bit
machine. Handle BFD_RELOC_SPARC13 and BFD_RELOC_SPARC_BASE13.
Thu Mar 17 18:26:46 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* bfd-in.h (BFD_VERSION): Use @VERSION@.
* Makefile.in (bfd.h): Replace it with contents of VERSION file.
* bfd-in2.h: Regenerated.
* trad-core.c (trad_unix_bfd_is_local_label): Fixed typo where
this was also named trad_unix_bfd_copy_private_bfd_data.
Thu Mar 17 10:37:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* aoutx.h, elfcode.h, coff-alpha.c, bout.c, ecoff.c, ecofflink.c,
elf32-hppa.c, elf32-mips.c, linker.c, som.c, sunos.c: If malloc(0)
returns NULL, it is not an error. It's possible that some of
these checks are not necessary (because the size can never be
zero), but putting in the checks is the conservative thing to do
in light of the fact that some of these malloc calls replaced
unchecked alloca calls, in which a zero argument would work fine.
Thu Mar 17 11:44:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* osf-core.c (osf_core_bfd_copy_private_bfd_data): Remove
duplicate definition.
(osf_core_bfd_is_local_label): Define.
* reloc.c (bfd_generic_get_relocated_section_contents): Don't fail
if malloc (0) fails. bfd_canonicalize_reloc returning 0 is not a
failure indication, it merely means there are no relocs.
* elfcode.h (NAME(bfd_elf,write_object_contents)): Don't use space
after NAME, since SunOS /bin/cc can't handle it.
Wed Mar 16 16:43:33 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* netbsd386.c (N_SET_FLAGS): Don't nuke the machine id field.
From sukes@glue.umd.edu (Tasuki Hirata).
Wed Mar 16 07:55:54 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* aoutf1.h (4 places): Use a simple #if on ARCH_SIZE, rather than
all that convoluted stuff with NAME, CAT3, etc. The convoluted
stuff broke for SunOS4 /bin/cc (due to DEFUN elimination, I guess).
Wed Mar 16 00:02:05 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_prep_for_fixups): Detect section symbols based
on either the lack of private data or the symbol flags. Do not
munge section symbol names anymore -- they no longer confuse GDB.
(som_begin_writing): Leave space for an exec header if writing
an executable.
(som_slurp_symbol_table): Recognize both forms of section symbol
names "L$0\002" and "$<FOO>$". Change the name of "L$0\002"
section symbols to be the name of the section they represent.
Debugging symbols begin with "L$0\001", not just "L$".
Tue Mar 15 22:58:28 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* bfd-in2.h, libbfd.h, libcoff.h: Rebuilt.
* bfd-in.h (JUMP_TABLE): Add new entries to the jump table
for bfd_copy_private_section_data, bfd_copy_private_bfd_data,
and bfd_is_local_label.
* targets.c: Add new entries to the bfd_target structure.
* bfd.c (bfd_copy_private_bfd_data): New definition.
* section.c (bfd_copy_private_section_data): New definition.
* syms.c (bfd_is_local_label): New definition.
* libbfd-in.h (bfd_generic_is_local_label): Declare.
* libbfd.c (bfd_generic_is_local_label): New function.
* *-core.c: Provide default definitions for new functions in
the target vector which all point to bfd_false.
* aout-target.h, coffcode.h, elf32-target.h elf64-target.h, ieee.c
libaout.h, libecoff.h, nlm-target.h, oasys.c, srec.c, tekhex.c
Default new vectors for copying private backend data to bfd_true.
Default new vector for determining if a symbol is a local label
to bfd_generic_is_local_label.
* som.c (som_bfd_copy_private_section_data): New function.
(som_bfd_is_local_label): New function.
(som_bfd_copy_private_bfd_data): For now default to bfd_true.
* elf32-hppa.c (hppa_elf_is_local_label): New function.
Tue Mar 15 23:55:47 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* cf-m68klynx.c (CALC_ADDEND): Use _bfd_m68klynx_howto_table.
Tue Mar 15 04:41:13 1994 David J. Mackenzie (djm@rtl.cygnus.com)
* Most files:
Replace DEFUN and DEFUN_VOID with K&R-style function definition.
Indent some of them to GNU standards.
* aout32.c, archures.c, core.c, cpu-h8300.c, cpu-i960.c,
cpu-m68k.c, cpu-m88k.c, cpu-mips.c, cpu-vax.c, ctor.c, demo64.c,
elf32-hppa.h, gen-aout.c, host-aout.c, init.c, libhppa.h,
libieee.h, liboasys.h, newsos3.c, som.h, stab-syms.c, sunos.c:
Update copyright years.
Mon Mar 14 11:41:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_prep_for_fixups): A relocation involving the section
symbol for the *ABS* section is really a relocation involving
no symbol.
(som_slurp_symbol_table): Do not set BSF_GLOBAL or BSF_EXPORT for
undefined symbols. Correctly distinguish between debugger symbols
and section symbols.
* som (setup_sections): Set SEC_DEBUGGING and the section attributes
for spaces and subspaces.
* som.c (som_bfd_count_ar_symbols): Fix typo.
* som.c (som_object_setup): Set EXEC_P, D_PAGED, WP_TEXT, and
HAS_RELOC based on the object's magic number.
(make_unique_section): Delete function. BFD and its users are
prepared to handle multiple sections with the same name.
(setup_sections): Allocate space on the BFD's obstack to hold
section names. Use bfd_make_setion_anyway rather than the
obsolete make_unique_section.
(som_prep_headers): Choose the correct SOM magic number based
on the BFD's flags.
(som_bfd_fill_in_ar_symbols): Return false, not NULL on error.
Sat Mar 12 09:46:09 1994 Ian Lance Taylor (ian@cygnus.com)
* elf32-ppc.c: Renamed from elf32-powerpc.c.
start-sanitize-powerpc-netware
* nlm32-ppc.c: Renamed from nlm32-powerpc.c.
end-sanitize-powerpc-netware
* Makefile.in, configure.in: Corresponding changes.
Fri Mar 11 22:27:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elf32-powerpc.c: Extensive changes to update to preliminary ABI.
Fri Mar 11 00:34:59 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* sunos.c (sunos_read_dynamic_info): Assume that dynamic info
is always located at the start of the data section to allow
recovery of the dynamic info from a stripped executable.
* ecoff.c (ecoff_styp_to_sec_flags): Handle STYP_PDATA, STYP_XDATA
and STYP_COMMENT.
Wed Mar 9 17:17:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* libbfd-in.h: Remove alloca cruft. It was missing some necessary
cruft (like the #pragma alloca for AIX).
In addition to that problem, the C alloca calls xmalloc, which
means checking for being out of memory can't work right. The
following changes remove all uses of alloca from BFD.
* hosts/solaris2.h: Remove alloca cruft.
* som.c: Replace alloca with a fixed size auto array.
* aoutx.h, elfcode.h, nlmcode.h, bout.c, coff-alpha.c, ecoff.c,
ecofflink.c, elf32-hppa.c, elf32-mips.c, linker.c, reloc.c, som.c,
sunos.c: Replace alloca with malloc and appropriate error checking and
freeing.
* linker.c: Replace alloca with obstack_alloc.
* libbfd.h: Rebuilt.
Tue Mar 8 12:10:38 1994 Ian Lance Taylor (ian@cygnus.com)
* coff-mips.c (mips_relocate_section): Handle MIPS_R_LITERAL like
MIPS_R_GPREL.
Sat Mar 5 14:08:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* elf32-hppa.h, elfcode.h: Replace uses of Elf*_Half, Elf*_Word,
Elf*_Off typedefs by their expansion, the typedefs have been
removed from include/elf/internal.h.
* elfcode.h (bfd_section_from_shdr): Handle SHT_DYNAMIC section like
SHT_PROGBITS section.
Thu Mar 3 20:03:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.h (_PA_RISC_ID): Treat HOST_HPPAOSF just like HOST_HPPABSD.
Wed Mar 2 13:28:06 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* configure.host: Recognize i[34]86-sequent-*.
* trad-core.c (trad_unix_core_file_p): A non-zero, not zero,
return from bfd_seek indicates an error.
New macro TRAD_CORE_DSIZE_INCLUDES_TSIZE to replace
TRAD_CORE_STACK_OFFSET.
* hosts/symmetry.h: Define TRAD_CORE_DSIZE_INCLUDES_TSIZE and
TRAD_CORE_USER_OFFSET but not HOST_STACK_OFFSET.
Wed Mar 2 11:57:03 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.[ch]: Do not include libhppa.h in som.c, instead include
it in som.h.
* elf32-hppa.[ch]: Do not include libhppa.h in elf32-hppa.c, instead
include it in elf32-hppa.h.
* som.c (log2): Return -1 on error rather than aborting.
(setup_sections): Bubble up an error from log2.
* Changes to make HP C compiler happy in both traditional
and ANSI mode.
* som.c (hppa_som_gen_reloc_type): Use correct enum type for
field parameter.
(bfd_som_set_section_attributes): Use unsigned int rather than
unsigned char to avoid GNU-C extensions.
(bfd_som_attach_aux_hdr): Return a boolean to indicate success
or failure rather than aborting on failure.
* som.h (bfd_som_set_section_attributes): Fix prototype to match
som.c changes.
(bfd_som_attach_aux_hdr): Add prototype.
(hppa_som-gen_reloc_type): Likewise.
* elf32-hppa.c: Add a couple casts to make HP compiler happy.
(hppa_look_for_stubs_in_section): Do not return false on failure
until rest of code is ready to handle it. Abort for now.
1994-03-02 10:36:07 +08:00
Tue Mar 1 18:33:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* bfd-in2.h: Rebuilt.
Tue Mar 1 13:06:53 1994 Kung Hsu (kung@mexican.cygnus.com)
* i386os9k.c: use new functions bfd_set_error and bfd_get_error.
* Makefile.in: delete an extra blank.
* configure.in : Add i396os9k_vec.
Mon Feb 28 15:41:01 1994 Kung Hsu (kung@mexican.cygnus.com)
1994-03-01 08:00:06 +08:00
* config.bfd : Add i386-os9k.
* config/i386-os9k.mt : Newly add os9k target makefile.
* i386os9k.c : new file to handle os9k format bfd.
* Makefile.in : Handle new file i386os9k.c
* targets.c : Add bfd_target_os9k_flavour and i386os9k_vec.
* cache.c : Initialize cache_sentinel to 0.
Sun Feb 27 16:30:55 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* elf32-hppa.c (mismatches, retval_mismatches): Fix mismatch
action in case where caller specified no argument relocation.
(hppa_elf_build_linker_stub): Try again to get the sym_ptr_ptr
right in the original relocation and the stub's relocation.
* elf32-hppa.h (hppa_look_for_stub_in_section): Fix typo. Delete
unused symbols argument.
* elf32-hppa.c (hppa_elf_stub_reloc): Accept asymbol ** rather
than asymbol * for original target symbol. All callers changed.
Set reloc->sym_ptr_ptr appropriately.
(hppa_elf_build_linker_stub): Set reloc->sym_ptr_ptr correctly.
(hppa_elf_look_for_stubs_in_section): No longer need symbols
argument. Use the output symbols when canonicalizing the relocs,
creating them if necessary.
* linker.c (_bfd_generic_link_output_symbols): Do not
rebuild/clobber the output symbols if they already exist.
Sun Feb 27 15:22:36 1994 Stan Shebs (shebs@andros.cygnus.com)
* targets.c (BFD_SEND, BFD_SEND_FMT): Add debugging versions that
check all the pointer dereferences. Enabled via DEBUG_BFD_SEND.
* bfd-in2.h: Rebuilt.
* srec.c (hex_value): Always set to a size of 256 bytes.
(srec_init): Cosmetic changes.
Sun Feb 27 11:18:47 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* elf32-hppa.c: Second half of major cleanup. More comments,
PARAMize and staticize rest of functions. Delete unused
functions. Delete unused/unnecessary arguments to some functions.
Group static vars together. Abort for bad errors until we have
error code propogation working. Work on spacing and indention.
Add FIXMEs for unresolved problems. Use enums rather than
#defines for lots of things. Merge two functions which build
linker stubs into a single function (so they can easily share a
ton of common code).
Sat Feb 26 10:00:45 1994 Ian Lance Taylor (ian@cygnus.com)
* reloc.c (_bfd_relocate_contents): Adjust handling of overflow to
avoid depending upon right shifts of signed numbers, and to
correct handling of src_mask with lower bits zero.
* aoutx.h, archive.c: Add casts to avoid warnings from SVR4 cc.
* ecoff.c, ecofflink.c, ecoffswap.h, srec.c: Likewise.
* elf32-i386.c: Likewise.
* elfcode.h (bfd_section_from_shdr): Make i unsigned; remove old
#if 0 code.
(elf_write_phdrs): Make i unsigned.
(map_program_segments): Make i and n_left unsigned.
(assign_file_positions_except_relocs): Make i unsigned.
(write_shdrs_and_ehdr): Make count unsigned.
(assign_file_positions_for_relocs): Make i unsigned.
(NAME(bfd,elf_write_object_contents)): Make count unsigned.
(section_from_elf_index): Make index argument unsigned.
1994-02-26 13:38:11 +08:00
Fri Feb 25 21:34:58 1994 Ian Lance Taylor (ian@cygnus.com)
* elfcode.h: Don't include assert.h.
(swap_out_syms): Use BFD_ASSERT rather than assert.
* linker.c (_bfd_generic_link_write_global_symbol): Add missing
break in switch.
* hosts/i386v4.h (qsort, strtol): Remove incorrect and useless
declarations.
Fri Feb 25 16:35:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* libhppa.h (hppa_rebuild_insn): Moved here from elf32-hppa.c.
* elf32-hppa.h (elf_hppa_tc_symbol): Add new arguments.
(elf_hppa_tc_make_sections): Likewise.
(elf_hppa_final_processing): Add extern decl.
* elf32-hppa.c: First half of major cleanup. Add/cleanup lots of
comments. PARAMize some static functions. Delete unused functions.
Delete unused/unnecessary arguments to many functions. Group
static vars together. Collapse common case statements together
in many places. Use default case when possible instead of listing
each case separately. Abort for bad errors until we get error
code propogation working. Work on spacing and indention problems.
Add FIXMEs for some unresolved problems. Delete hopelessly broken
COMPLEX relocation support (it's never used anyway).
(hppa_elf_rebuild_insn): Delete. Moved into libhppa.h.
(elf_hppa_tc_symbol): Accept and use new arguments (symext chains).
(elf_hppa_tc_make_sections): Likewise.
* format.c (bfd_check_format_matches): Initialize matching_vector
to keep gcc -Wall quiet.
* elfcode.h (elf_slurp_reloca_table): Fix typo.
* som.c (som_get_symtab_upper_bound): Use "sizeof (asymbol *)"
not "sizeof (som_symbol_type *)".
* elfcode.h (elf_get_symtab_upper_bound): Use "sizeof (asymbol *)"
not "sizeof (asymbol"). Opps.
Fri Feb 25 13:19:04 1994 Ted Lemon (mellon@pepper.ncd.com)
* bfd.c (bfd_get_gp_size): Can't return gp value on an archive.
(bfd_set_gp_size): Can't set gp value on an archive.
Fri Feb 25 12:57:00 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* srec.c (pass_over): Don't skip too many characters when
end of line seen.
Fri Feb 25 11:41:57 1994 Ian Lance Taylor (ian@cygnus.com)
* ecoff.c (ecoff_sizeof_headers): Align result to 16 byte
boundary.
Thu Feb 24 07:13:22 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_bfd_derive_misc_symbol_info): Derive symbol_info
field for absolute symbols in the same manner as undefined
and common symbols.
Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* elfcode.h (elf_core_file_p): Check for core file e_machine match
like in elf_object_p.
Wed Feb 23 18:28:37 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* elfcode.h (alloca): Delete declaration.
* som.c (som_prep_headers): Use CPU_PA_RISC1_0 for magic
number rather than HP9000S800_ID. Note som.c is careful
to make sure CPU_PA_RISC1_0 is always defined.
Mon Feb 21 10:12:02 1994 Stan Shebs (shebs@andros.cygnus.com)
* Makefile.in (targets.o, archures.o): Use ALL_CFLAGS to supply
flags to explicit compile actions.
Mon Feb 21 09:50:06 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
* ecofflink.c (ecoff_write_symhdr): Set symhdr->magic here.
* ecoff.c (ecoff_write_object_contents): Make sure .bss section
ends on a page boundary if there is no symbol table.
(ecoff_bfd_final_link): Don't set symhdr->magic here.
* hosts/hp300.h: Include <stdlib.h>; don't declare free.
* som.c (som_bfd_count_ar_symbols): Use a pointer and alloca
rather than an array of variable size.
(som_bfd_fill_in_ar_symbols): Likewise.
(som_bfd_ar_write_symbol_stuff): Likewise.
* coff-alpha.c (alpha_relocate_section): Rewrite mask and shift
operation to avoid OSF 1.3 cc bug.
* ecoff.c (ecoff_write_object_contents): Make text_size, data_size
and bss_size bfd_size_type instead of unsigned long. Make
text_start and data_start bfd_vma instead of unsigned long.
* ecofflink.c (ecoff_add_string): Remove incorrect cast of return
value.
Sun Feb 20 16:06:54 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
* linker.c (_bfd_generic_link_add_archive_symbols): Consider
symbols in the order they appear in the archive map.
Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* coff-alpha.c (reloc_nil): Add forward declaration, add missing
error_message argument.
* coff-sparc.c (bfd_coff_generic_reloc): Add forward declaration,
add missing error_message argument.
* mipsbsd.c (mips_fix_hi16_s): Add forward declaration, add missing
error_message argument.
Fri Feb 18 11:41:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
start-sanitize-powerpc-netware
Support for PowerPC NetWare.
* nlm32-powerpc.c: New file.
* config.bfd (powerpc-*-netware*): New target; use ppc-nlm.
* config/ppc-nlm.mt: New file.
* configure.in (nlm32_powerpc_vec): New target vector; use
nlm32-powerpc.o, nlm32.o, nlm.o.
* targets.c (nlm32_powerpc_vec): Declare.
* Makefile.in (BFD32_BACKENDS): Add nlm32-powerpc.o.
(CFILES): Should add nlm32-powerpc.c, but didn't, because the
dependencies can't be sanitized.
end-sanitize-powerpc-netware
Initial support for PowerPC ELF. Done without an ABI, and
probably to be changed when I get an ABI.
* config.bfd (powerpc-*-sysv4*): New target; use ppc-elf.
* config/ppc-elf.mt: New file.
* configure.in (bfd_elf32_powerpc_vec): New target vector; use
elf32-powerpc.o, elf32.o, elf.o.
* elf32-powerpc.c: New file.
* elfcode.h (prep_headers): Add bfd_arch_powerpc case.
(elf_set_arch_mach): Likewise.
* targets.c (bfd_elf32_powerpc_vec): Declare.
* Makefile.in (BFD32_BACKENDS): Add elf32-powerpc.o.
(CFILES): Add elf32-powerpc.c.
Rebuilt dependencies.
1994-02-18 04:56:49 +08:00
Thu Feb 17 15:29:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffgen.c (coff_write_linenumbers): Always return a value.
* elfcode.h (elf_slurp_symbol_table): Handle zero symbols
reasonably. Allocate x_symp using alloca.
* elfcode.h (map_program_segments): ELF program header entries
must be sorted by load address. This used to generate the entries
in reverse order.
* section.c (SEC_IN_MEMORY): Define.
(asection): Rename unused field otheruserdata to contents, and
make it char *.
(bfd_make_section_anyway): Initialize contents field to NULL.
(bfd_get_section_contents): If SEC_IN_MEMORY is set, get section
contents from contents field rather than from file.
* bfd-in2.h: Rebuilt.
Thu Feb 17 08:30:53 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* bfd.c (bfd_get_error, bfd_set_error): New functions.
(bfd_error): Make static.
(bfd_error_type): Renamed from bfd_ec. Prepend "bfd_error_" to
all values.
* bfd-in2.h: Regenerated.
* aix386-core.c, aout-adobe.c, aout-encap.c, aout-target.h,
aoutf1.h, aoutx.h, archive.c, archures.c,
bfd.c, bout.c, cache.c, coff-alpha.c, coff-mips.c,
coff-rs6000.c, coffcode.h, coffgen.c, core.c, ctor.c,
ecoff.c, ecofflink.c, elf.c, elf32-hppa.c, elf32-mips.c,
elfcode.h, format.c, hash.c, hp300hpux.c, hppabsd-core.c,
i386lynx.c, ieee.c, libbfd.c, libelf.h, linker.c,
lynx-core.c, nlm.c, nlm32-alpha.c, nlm32-i386.c,
nlm32-sparc.c, nlmcode.h, oasys.c, opncls.c, osf-core.c,
ptrace-core.c, reloc16.c, rs6000-core.c, section.c, som.c,
srec.c, sunos.c, syms.c, targets.c, tekhex.c,
trad-core.c: Change callers.
Tue Feb 15 22:27:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c: Remove FIXMEs for things which have been dealt with.
Tue Feb 15 19:39:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* section.c (bfd_get_section_contents): Since this function reads
unrelocated contents, the section's raw size is always the one to
use for bounds checking.
* linker.c (default_indirect_link_order): In assertion, compare
link_order size field against cooked size, not raw size, of input
section.
* bout.c (b_out_get_reloc_upper_bound): For BSS section, just
return 0.
(aligncode): When shrinking, the addend should be set to the
current offset in the section plus the number of bytes of padding
that will actually be retained.
(b_out_relax_section): If a section contains no relocations, don't
bother processing them.
(b_out_get_relocated_section_contents): Set reloc_done. Assert
that bfd_get_section_contents returns true. Check that relocs are
properly ordered.
(b_out_get_relocated_section_contents, case ALIGNDONE): Assert
that reloc->addend falls between the current source offset and the
raw size of the input section.
* config.bfd: Support i960 vxworks versions > 5.0 with coff, not
bout. Default with no version number is still bout. Support
explicit i960-coff target too.
* bout.c: Changed some indentation, deleted trailing whitespace,
fixed some comments, removed some "#if 1" lines.
(output_addr): New macro.
(calljx_callback, callj_callback, get_value, abs32code, aligncode,
b_out_get_relocated_section_contents): Use it for readability.
Tue Feb 15 09:00:16 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_bfd_prep_for_ar_write): Iterate through the SOM
symbols, not the BFD symbols.
(som_bfd_ar_write_symbol_stuff): Likewise.
Mon Feb 14 22:55:20 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_slurp_symbol_table): Do not die if a BFD doesn't
have any symbols.
* Finish basic read-write support for SOM archive libraries. Bugs
surely remain as this hasn't been tested all that much.
* som.c (SOM_LST_HASH_SIZE, SOM_LST_MODULE_LIMIT): Define.
(struct som_misc_symbol_info): New structure to hold info necessary
to build both normal and library symbol tables.
(som_derive_misc_symbol_info): New function to derive info necessary
to build both normal and library symbol tables.
(som_build_and_write_symbol_table): Use new function to derive misc
symbol information.
(som_slurp_symbol_table): Update backend private data for symbols
appropriately.
(som_bfd_prep_for_ar_write): New function.
(som_bfd_ar_symbol_hash): New function.
(som_bfd_ar_write_symbol_stuff): New function.
(som_write_armap): Flesh out.
(som_vec): Fix ar padding character.
* som.c: Consistently use memset rather than bzero.
Mon Feb 14 17:02:28 1994 Stu Grossman (grossman at cygnus.com)
* coff-rs6000.c: Add Lynx core file support, use HOST_AIX, where
appropriate.
* rs6000-core.c: Use HOST_AIX instead of COREFILES_PLEASE.
* config/rs6000.mh: Remove defs of ARCHIVES_PLEASE and
COREFILES_PLEASE.
* config/rs6000lynx.mh: Turn on Lynx core file support.
* hosts/rs6000.h: #define HOST_AIX.
* hosts/rs6000lynx.h: Create this to enable Lynx host support.
1994-02-14 06:30:51 +08:00
Sun Feb 13 14:30:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.h (som_symbol_data): Safely access backend private data
for BFD symbols. All callers changed.
* Read-only SOM archive support.
* som.c (som_bfd_count_ar_symbols): New helper function.
(som_bfd_fill_in_ar_symbols): New helper function.
(som_slurp_armap): New function to read a SOM LST.
1994-02-14 06:30:51 +08:00
* som.h: Include <lst.h> and <ar.h>.
Sat Feb 12 22:34:14 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* elfcode.h (elf_map_symbols): Fix typo.
(write_object_contents): Check return values from prep_headers and
elf_compute_section_file_positions.
(set_section_contents): Likewise.
Fri Feb 11 16:56:50 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* archive.c (normalize) [VMS]: Call malloc, not bfd_xmalloc.
(bfd_construct_extended_name_table): Check result of normalize.
Make all callers of malloc or realloc (including via obstacks) check the result for NULL. Most set bfd_error to no_memory and return in that case; a few are harder to fix, and are marked with "FIXME <return type>". * elf32-hppa.c (hppa_elf_build_arg_reloc_stub hppa_elf_build_long_branch_stub): Check bfd_make_empty_symbol return. * linker.c (_bfd_generic_link_output_symbols _bfd_generic_link_write_global_symbol): Ditto * section.c (bfd_make_section_anyway): Ditto. * tekhex.c (find_chunk tekhex_mkobject): Check bfd_alloc. (first_phase): Ditto. FIXME void (tekhex_make_empty_symbol): Check bfd_zalloc. * sunos.c (sunos_read_dynamic_info): Check bfd_zalloc. (MY(read_dynamic_symbols) MY(read_dynamic_relocs)): Check bfd_alloc. * stringhash.c (_bfd_stringtab_hash_newfunc): Check bfd_hash_allocate. * srec.c: Indent. (fillup_symbols): Check bfd_alloc. FIXME void (srec_mkobject srec_get_section_contents srec_set_section_contents): Check bfd_alloc. (srec_make_empty_symbol): Check bfd_zalloc. * som.c (hppa_som_gen_reloc_type): Check bfd_alloc_by_size_t. (make_unique_section): Check bfd_alloc. (som_new_section_hook): Check bfd_zalloc. (bfd_som_attach_aux_hdr): Ditto. FIXME void * rs6000-core.c (rs6000coff_core_p): Check bfd_zalloc. * osf-core.c (osf_core_make_empty_symbol): Check bfd_zalloc. (osf_core_core_file_p): Check bfd_alloc. * oasys.c (oasys_slurp_symbol_table oasys_archive_p oasys_mkobject oasys_object_p oasys_new_section_hook oasys_set_section_contents): Check bfd_alloc. (oasys_slurp_section_data): Check bfd_zalloc and bfd_alloc. (oasys_make_empty_symbol): Check bfd_zalloc. * nlmcode.h (nlm_make_empty_symbol): Check bfd_zalloc. (nlm_slurp_symbol_table): Check bfd_zalloc and bfd_alloc. * nlm32-sparc.c (nlm_sparc_read_import): Check bfd_alloc. * nlm32-i386.c (nlm_i386_read_import): Check bfd_alloc. * nlm32-alpha.c (nlm_alpha_read_import): Check bfd_alloc. * linker.c (_bfd_link_hash_newfunc (generic_link_hash_newfunc (archive_hash_newfunc (_bfd_generic_link_add_one_symbol): Check bfd_hash_allocate. (_bfd_generic_final_link (_bfd_generic_link_output_symbols (default_indirect_link_order): Check bfd_alloc. (bfd_new_link_order): Check bfd_alloc_by_size_t. * irix-core.c (irix_core_make_empty_symbol): Check bfd_zalloc. * ieee.c: Indent. (read_id get_symbol get_section_entry ieee_archive_p ieee_object_p ieee_slurp_section_data ieee_new_section_hook): Check bfd_alloc. (do_one): Check bfd_alloc. Return a boolean. (ieee_slurp_section_data): Check it. (init_for_output): Check bfd_alloc. Return a boolean. (ieee_set_section_contents): Check it. (do_with_relocs): Check bfd_alloc. Return a boolean. (ieee_bfd_debug_info_accumulate): Ditto. FIXME void. (ieee_mkobject): Check bfd_zalloc. (ieee_make_empty_symbol): Check bfd_zmalloc. * hpux-core.c (hpux_core_make_empty_symbol): Check bfd_zalloc. * hppabsd-core.c (hppabsd_core_make_empty_symbol): Check bfd_zalloc. (hppabsd_core_core_file_p): Check bfd_zalloc. * hp300hpux.c (MY(slurp_symbol_table)): Check bfd_alloc. * elfcode.h (elf_new_section_hook): Check bfd_alloc. (bfd_section_from_phdr): Ditto. (write_relocs): Ditto. FIXME void (elf_map_symbols assign_section_numbers map_program_segments): Ditto. Return a boolean. (swap_out_syms): Ditto. Check elf_map_symbols. (elf_slurp_symbol_table): Check bfd_zalloc. (elf_slurp_reloca_table): Check bfd_alloc. (elf_slurp_reloc_table): Ditto. (elf_compute_section_file_positions): Check assign_section_numbers. (assign_file_positions_except_relocs): Return a boolean. Check map_program_segments. (elf_compute_section_file_positions): Check it. * elf32-mips.c (mips_elf_final_link): Check bfd_alloc. * elf32-hppa.c (hppa_elf_stub_branch_reloc): Check bfd_zmalloc and realloc. (hppa_elf_stub_reloc): Ditto. (hppa_elf_build_arg_reloc_stub): Check bfd_zalloc. (hppa_elf_build_long_branch_stub): Ditto. (elf32_hppa_backend_symbol_table_processing): Ditto. * ecoff.c (ecoff_set_symbol_info): Check bfd_alloc. Return a boolean. (ecoff_slurp_symbol_table): Check it. (ecoff_slurp_armap): Check bfd_alloc. (ecoff_write_armap): Check bfd_zalloc. (ecoff_link_hash_newfunc): Check bfd_hash_allocate and _bfd_link_hash_newfunc. (ecoff_link_add_externals): Check bfd_alloc. * ctor.c (bfd_constructor_entry): Check bfd_alloc. * coffgen.c (coff_real_object_p): Check bfd_alloc. (coff_renumber_symbols): Check bfd_alloc_by_size_t. Return a boolean. (coff_write_symbol): Check bfd_alloc. FIXME int (coff_write_linenumbers): Check bfd_alloc. Return a boolean. (coff_section_symbol): Check bfd_alloc_by_size_t. (coff_get_normalized_symtab): Check bfd_alloc. (coff_bfd_make_debug_symbol): Check bfd_zalloc. * libcoff-in.h: Change decls of coff_renumber_symbols, coff_write_linenumbers. * libcoff.h: Rebuilt. * coffcode.h (coff_write_object_contents): Check coff_renumber_symbols, coff_write_linenumbers. * coffcode.h: Indent. (coff_add_missing_symbols): Check bfd_alloc_by_size_t. Return a boolean. (coff_write_object_contents): Check it. * coff-alpha.c (alpha_relocate_section): Check bfd_alloc. * coff-mips.c (mips_relocate_section): Ditto. * archive.c (bfd_slurp_bsd_armap_f2): Check bfd_alloc value. (do_slurp_bsd_armap): Ditto. (compute_and_write_armap): Check bfd_realloc value. * aoutx.h (translate_from_native_sym_flags): Check bfd_alloc return value. Return boolean value. (NAME(aout,make_empty_symbol)): Check bfd_zalloc return value. (NAME(aout,slurp_symbol_table)): Check bf_alloc and bfd_zalloc return value. (add_to_stringtab): Ditto. FIXME void (aout_link_hash_newfunc): Check bfd_hash_allocate return value. (aout_link_add_symbols): Check bfd_alloc value. (translate_symbol_table): Check translate_from_native_sym_flags. * hp300hpux.c (MY(slurp_symbol_table)): Ditto. * aoutx.h (aout_link_hash_newfunc): Check _bfd_link_hash_newfunc. * opncls.c (bfd_zalloc bfd_realloc): Check result of bfd_alloc. * opncls.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (_bfd_new_bfd): Check obstack_begin for 0 return. * ieee.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (ieee_archive_p): Check obstack_begin for 0 return and obstack_finish for NULL return. * hash.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (bfd_hash_table_init_n): Check obstack_begin for 0 return and obstack_finish for NULL return. (bfd_hash_lookup): Check obstack_alloc for NULL return. * ecofflink.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. bfd_ecoff_debug_accumulate bfd_ecoff_debug_accumulate_other): Check obstack_alloc. (add_file_shuffle add_memory_shuffle): Check obstack_alloc for NULL return. Return boolean, not void. (bfd_ecoff_debug_init): Check obstack_begin for 0 return. (bfd_ecoff_debug_accumulate): Check add_file_shuffle and add_memory_shuffle return. (string_hash_newfunc): Check bfd_hash_allocate and bfd_hash_newfunc. (bfd_ecoff_debug_accumulate): Check bfd_alloc. (ecoff_add_string): Check add_memory_shuffle return. * libbfd-in.h (xmalloc, bfd_xmalloc, bfd_xmalloc_by_size_t): Remove decls. * libbfd.h: Rebuilt.
1994-02-12 08:45:54 +08:00
Tue Feb 8 08:57:31 1994 David J. Mackenzie (djm@thepub.cygnus.com)
Make all callers of malloc or realloc (including via obstacks)
check the result for NULL. Most set bfd_error to no_memory and
return in that case; a few are harder to fix, and are marked
with "FIXME <return type>".
* elf32-hppa.c (hppa_elf_build_arg_reloc_stub
hppa_elf_build_long_branch_stub): Check bfd_make_empty_symbol return.
* linker.c (_bfd_generic_link_output_symbols
_bfd_generic_link_write_global_symbol): Ditto
* section.c (bfd_make_section_anyway): Ditto.
* tekhex.c (find_chunk tekhex_mkobject): Check bfd_alloc.
(first_phase): Ditto. FIXME void
(tekhex_make_empty_symbol): Check bfd_zalloc.
* sunos.c (sunos_read_dynamic_info): Check bfd_zalloc.
(MY(read_dynamic_symbols) MY(read_dynamic_relocs)): Check bfd_alloc.
* stringhash.c (_bfd_stringtab_hash_newfunc): Check bfd_hash_allocate.
* srec.c: Indent.
(fillup_symbols): Check bfd_alloc. FIXME void
(srec_mkobject srec_get_section_contents
srec_set_section_contents): Check bfd_alloc.
(srec_make_empty_symbol): Check bfd_zalloc.
* som.c (hppa_som_gen_reloc_type): Check bfd_alloc_by_size_t.
(make_unique_section): Check bfd_alloc.
(som_new_section_hook): Check bfd_zalloc.
(bfd_som_attach_aux_hdr): Ditto. FIXME void
* rs6000-core.c (rs6000coff_core_p): Check bfd_zalloc.
* osf-core.c (osf_core_make_empty_symbol): Check bfd_zalloc.
(osf_core_core_file_p): Check bfd_alloc.
* oasys.c (oasys_slurp_symbol_table oasys_archive_p
oasys_mkobject oasys_object_p oasys_new_section_hook
oasys_set_section_contents): Check bfd_alloc.
(oasys_slurp_section_data): Check bfd_zalloc and bfd_alloc.
(oasys_make_empty_symbol): Check bfd_zalloc.
* nlmcode.h (nlm_make_empty_symbol): Check bfd_zalloc.
(nlm_slurp_symbol_table): Check bfd_zalloc and bfd_alloc.
* nlm32-sparc.c (nlm_sparc_read_import): Check bfd_alloc.
* nlm32-i386.c (nlm_i386_read_import): Check bfd_alloc.
* nlm32-alpha.c (nlm_alpha_read_import): Check bfd_alloc.
* linker.c (_bfd_link_hash_newfunc
(generic_link_hash_newfunc
(archive_hash_newfunc
(_bfd_generic_link_add_one_symbol): Check bfd_hash_allocate.
(_bfd_generic_final_link
(_bfd_generic_link_output_symbols
(default_indirect_link_order): Check bfd_alloc.
(bfd_new_link_order): Check bfd_alloc_by_size_t.
* irix-core.c (irix_core_make_empty_symbol): Check bfd_zalloc.
* ieee.c: Indent.
(read_id get_symbol get_section_entry ieee_archive_p ieee_object_p
ieee_slurp_section_data ieee_new_section_hook): Check bfd_alloc.
(do_one): Check bfd_alloc. Return a boolean.
(ieee_slurp_section_data): Check it.
(init_for_output): Check bfd_alloc. Return a boolean.
(ieee_set_section_contents): Check it.
(do_with_relocs): Check bfd_alloc. Return a boolean.
(ieee_bfd_debug_info_accumulate): Ditto. FIXME void.
(ieee_mkobject): Check bfd_zalloc.
(ieee_make_empty_symbol): Check bfd_zmalloc.
* hpux-core.c (hpux_core_make_empty_symbol): Check
bfd_zalloc.
* hppabsd-core.c (hppabsd_core_make_empty_symbol): Check
bfd_zalloc.
(hppabsd_core_core_file_p): Check bfd_zalloc.
* hp300hpux.c (MY(slurp_symbol_table)): Check bfd_alloc.
* elfcode.h (elf_new_section_hook): Check bfd_alloc.
(bfd_section_from_phdr): Ditto.
(write_relocs): Ditto. FIXME void
(elf_map_symbols assign_section_numbers map_program_segments):
Ditto. Return a boolean.
(swap_out_syms): Ditto. Check elf_map_symbols.
(elf_slurp_symbol_table): Check bfd_zalloc.
(elf_slurp_reloca_table): Check bfd_alloc.
(elf_slurp_reloc_table): Ditto.
(elf_compute_section_file_positions): Check assign_section_numbers.
(assign_file_positions_except_relocs): Return a boolean.
Check map_program_segments.
(elf_compute_section_file_positions): Check it.
* elf32-mips.c (mips_elf_final_link): Check bfd_alloc.
* elf32-hppa.c (hppa_elf_stub_branch_reloc): Check bfd_zmalloc and
realloc.
(hppa_elf_stub_reloc): Ditto.
(hppa_elf_build_arg_reloc_stub): Check bfd_zalloc.
(hppa_elf_build_long_branch_stub): Ditto.
(elf32_hppa_backend_symbol_table_processing): Ditto.
* ecoff.c (ecoff_set_symbol_info): Check bfd_alloc. Return a boolean.
(ecoff_slurp_symbol_table): Check it.
(ecoff_slurp_armap): Check bfd_alloc.
(ecoff_write_armap): Check bfd_zalloc.
(ecoff_link_hash_newfunc): Check bfd_hash_allocate and
_bfd_link_hash_newfunc.
(ecoff_link_add_externals): Check bfd_alloc.
* ctor.c (bfd_constructor_entry): Check bfd_alloc.
* coffgen.c (coff_real_object_p): Check bfd_alloc.
(coff_renumber_symbols): Check bfd_alloc_by_size_t. Return a boolean.
(coff_write_symbol): Check bfd_alloc. FIXME int
(coff_write_linenumbers): Check bfd_alloc. Return a boolean.
(coff_section_symbol): Check bfd_alloc_by_size_t.
(coff_get_normalized_symtab): Check bfd_alloc.
(coff_bfd_make_debug_symbol): Check bfd_zalloc.
* libcoff-in.h: Change decls of coff_renumber_symbols,
coff_write_linenumbers.
* libcoff.h: Rebuilt.
* coffcode.h (coff_write_object_contents): Check
coff_renumber_symbols, coff_write_linenumbers.
* coffcode.h: Indent.
(coff_add_missing_symbols): Check bfd_alloc_by_size_t. Return a
boolean.
(coff_write_object_contents): Check it.
* coff-alpha.c (alpha_relocate_section): Check bfd_alloc.
* coff-mips.c (mips_relocate_section): Ditto.
* archive.c (bfd_slurp_bsd_armap_f2): Check bfd_alloc value.
(do_slurp_bsd_armap): Ditto.
(compute_and_write_armap): Check bfd_realloc value.
* aoutx.h (translate_from_native_sym_flags): Check bfd_alloc
return value. Return boolean value.
(NAME(aout,make_empty_symbol)): Check bfd_zalloc return value.
(NAME(aout,slurp_symbol_table)): Check bf_alloc and bfd_zalloc
return value.
(add_to_stringtab): Ditto. FIXME void
(aout_link_hash_newfunc): Check bfd_hash_allocate return value.
(aout_link_add_symbols): Check bfd_alloc value.
(translate_symbol_table): Check translate_from_native_sym_flags.
* hp300hpux.c (MY(slurp_symbol_table)): Ditto.
* aoutx.h (aout_link_hash_newfunc): Check _bfd_link_hash_newfunc.
* opncls.c (bfd_zalloc bfd_realloc): Check result of bfd_alloc.
* opncls.c (obstack_chunk_alloc): Define as malloc, not
bfd_xmalloc_by_size_t.
(_bfd_new_bfd): Check obstack_begin for 0 return.
* ieee.c (obstack_chunk_alloc): Define as malloc, not
bfd_xmalloc_by_size_t.
(ieee_archive_p): Check obstack_begin for 0 return and
obstack_finish for NULL return.
* hash.c (obstack_chunk_alloc): Define as malloc, not
bfd_xmalloc_by_size_t.
(bfd_hash_table_init_n): Check obstack_begin for 0 return and
obstack_finish for NULL return.
(bfd_hash_lookup): Check obstack_alloc for NULL return.
* ecofflink.c (obstack_chunk_alloc): Define as malloc, not
bfd_xmalloc_by_size_t.
bfd_ecoff_debug_accumulate
bfd_ecoff_debug_accumulate_other): Check obstack_alloc.
(add_file_shuffle add_memory_shuffle): Check obstack_alloc for
NULL return. Return boolean, not void.
(bfd_ecoff_debug_init): Check obstack_begin for 0 return.
(bfd_ecoff_debug_accumulate): Check add_file_shuffle
and add_memory_shuffle return.
(string_hash_newfunc): Check bfd_hash_allocate and bfd_hash_newfunc.
(bfd_ecoff_debug_accumulate): Check bfd_alloc.
(ecoff_add_string): Check add_memory_shuffle return.
* libbfd-in.h (xmalloc, bfd_xmalloc, bfd_xmalloc_by_size_t):
Remove decls.
* libbfd.h: Rebuilt.
Fri Feb 11 15:35:32 1994 Stu Grossman (grossman at cygnus.com)
* configure.host: Add Lynx/rs6000 support.
* config/i386-nlm.mt: Enable a.out file support.
* config/rs6000lynx.mh: Lynx/rs6000 host support.
Fri Feb 11 17:25:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* archive.c (compute_and_write_armap): Rewrite somewhat to improve
memory usage.
Fri Feb 11 13:10:42 1994 Stan Shebs (shebs@andros.cygnus.com)
* archive.c: Change all references to '\n' in archive magic
to '\012', for greater portability.
* ecoff.c (ecoff_write_armap): Ditto.
Thu Feb 10 12:58:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (aout_link_write_other_symbol): Check strip settings to
see whether symbol should be output.
* genlink.h (struct generic_write_global_symbol_info): Added info
field.
* linker.c (_bfd_generic_final_link): Initialize wginfo.info.
(_bfd_generic_link_write_global_symbol): Check strip settings to
see whether symbol should be output.
* elf32-mips.c (mips_elf_final_link): Initialize wginfo.info.
Wed Feb 9 21:34:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_reloc_queue_find): Do not examine a NULL queue entry.
* som.c: Cast return values from BFD memory allocation routines to
avoid warnings from the HP compiler.
Wed Feb 9 12:55:02 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coff-alpha.c (alpha_relocate_section): Accept a LITERAL
reloc on an "ldl" instruction too.
* archive.c (bfd_ar_hdr_from_filesystem): Cast status elements
when passing them to sprintf. Use %ld instead of %d.
* coff-rs6000.c (rs6000coff_mkarchive): Return false.
(rs6000_coff_snarf_ar_hdr): Don't declare errno; it's not used.
Also removed unused variable namelen.
(rs6000coff_write_armap): Declare orl_count and stridx parameters.
Tue Feb 8 18:00:34 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* libbfd-in.h (xmalloc): Don't declare parameter type, to avoid
conflicts.
* libbfd.h: Rebuilt.
Tue Feb 8 15:55:50 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* coff-alpha.c (reloc_nil): New function.
(alpha_howto_table): Use it as special_function to prevent certain
relocs from being adjusted by bfd_perform_relocation. IGNORE
reloc should be partial_inplace.
(alpha_ecoff_get_relocated_section_contents): Accept a LITERAL
reloc on an "ldl" instruction too.
Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* elf32-hppa.c (CURRENT_STUB_OFFSET, hppa_elf_build_arg_reloc_stub,
hppa_elf_build_long_branch_stub): Cast to char * instead of int
before performing pointer arithmetic.
Mon Feb 7 20:56:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config.bfd (hppa*-*-osf*): Use bfd_name hppaosf for this
configuration.
(hppa*-*-*elf*): This configuration used hppa-elf now.
* som.c: This file is also used for HOST_HPPAOSF.
* targets.c (bfd_target_vector): Enable som_vec for HOST_HPPAOSF.
* hosts/hppaosf.h: New host configuration file.
* config/hppabsd.mt (SELECT_VECS): Add bfd_elf32_hppa_vec as
BSD handles both SOM and ELF object files.
* config/hppaosf.mh (HDEFINES): Delete. No longer needed.
(RANLIB): Doesn't do anything, define it to be "echo".
* config/hppaosf.mt: New target makefile fragment for a PA running
OSF1.
Mon Feb 7 15:02:06 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* archures.c (enum bfd_architecture): Added bfd_arch_powerpc.
(archures_init_table): If SELECT_ARCHITECTURES is not defined,
added bfd_powerpc_arch.
* bfd-in2.h: Rebuilt.
* cpu-powerpc.c: New file.
* Makefile.in (ALL_MACHINES, CFILES): Added cpu-powerpc.c.
Rebuilt dependencies.
* elfcode.h (bfd_section_from_shdr): Get vma and alignment_power
of an SHT_STRTAB section from sh_addr and sh_addralign, rather
than just setting them to zero.
Sun Feb 6 20:04:10 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* elfcode.h (prep_headers, swap_out_syms): Check for NULL return
from bfd_new_strtab.
(elf_compute_section_file_positions): Check for false return from
swap_out_syms.
* linker.c (default_indirect_link_order): Check for NULL return
from bfd_get_relocated_section_contents.
* syms.c: Make example application in doc call xmalloc, not
bfd_xmalloc.
* aoutx.h (NAME(aout,slurp_symbol_table),
aout_link_get_symbols, NAME(aout,link_hash_table_create)):
* bout.c (b_out_slurp_reloc_table, b_out_squirt_out_relocs):
* ecoff.c (ecoff_bfd_link_hash_table_create):
* ecofflink.c (bfd_ecoff_debug_init):
* format.c (bfd_check_format_matches):
* linker.c (_bfd_generic_link_hash_table_create):
(_bfd_generic_final_link):
* reloc16.c (bfd_coff_reloc16_relax_section):
(bfd_coff_reloc16_get_relocated_section_contents):
* elf32-hppa.c (hppa_elf_build_arg_reloc_stub):
* elf32-mips.c (mips_elf_final_link):
* elfcode.h (bfd_new_strtab):
(bfd_add_2_to_strtab):
(elf_slurp_symbol_table):
(elf_corefile_note):
* libbfd.c (bfd_zmalloc):
Use malloc and check the result, instead of bfd_xmalloc.
Sat Feb 5 12:39:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* config.bfd: Put m68*-*-sysv* line after m68*-*-sysv4*.
Sat Feb 5 05:32:44 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* srec.c (srec_write_record): Put CONST keyword for "src" before
"unsigned", some compilers don't like it after "unsigned".
* libcoff.h, libcoff-in.h (bfd_perform_slip): Rename "value" to
"val" in prototype declaration because some compilers don't like
arguments whose names are the same as types.
Sat Feb 5 01:14:38 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (aout_link_check_ar_symbols): Correct test for whether
object file defines symbol. Also, if skipping a symbol, skip the
second symbol of a N_WARNING or N_INDR symbol as well.
Fri Feb 4 23:55:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Add basic support for writing RS/6000 XCOFF files.
* coff-rs6000.c (dummy_reloc): Removed.
(rs6000coff_howto_table): Defined XCOFF relocs.
(RTYPE2HOWTO): Defined to use rs6000coff_rtype2howto.
(rs6000coff_rtype2howto): New function.
(coff_bfd_reloc_type_lookup): Defined to use
rs6000coff_reloc_type_lookup.
(rs6000coff_reloc_type_lookup): New function.
(SELECT_RELOC): Defined to set r_type and r_size fields.
(COFF_LONG_FILENAMES): Defined.
* coffcode.h (combined_entry_type): Changed fix_tag and fix_end
fields to bitfields. Added fields fix_value and fix_scnlen.
(sec_to_styp_flags): If STYP_DEBUG is defined, use it rather than
STYP_INFO for the type of a section named .debug.
(coff_add_missing_symbols): Don't define if RS6000COFF_C.
(coff_write_object_contents): If RS6000COFF_C, don't call
coff_add_missing_symbols.
(coff_slurp_symbol_table): If RS6000COFF_C, then if the last aux
entry has type STY_LD change the x_scnlen into a pointer to a
symbol and set fix_scnlen. Also, for a C_BSTAT symbol, change the
value into a pointer to a symbol and set fix_value.
* libcoff.h: Rebuilt.
* coffgen.c (coff_mangle_symbols): Reindent. If fix_value is set,
get the symbol offset. Likewise for fix_scnlen.
(string_size): Change type to bfd_size_type.
(debug_string_size, debug_string_section): New static variables.
(coff_fix_symbol_name): If bfd_coff_symname_in_debug returns true,
write the symbol name into the .debug section; assume that the
section has already been created with the right size.
(coff_write_symbols): Initialize debug_string_size to 0. If
bfd_coff_symname_in_debug returns true, don't put symbol name in
usual string table. After writing out all symbols, if
debug_string_size is not 0, check that it matches the size of the
.debug section.
(coff_get_normalized_symtab): Clear new fix_value and fix_scnlen
fields. If the string offset is 0, always use an empty string as
the name.
(coff_make_empty_symbol): Zero out the symbol structure.
* reloc.c (bfd_perform_relocation): Work around one gross hack
with another: actually look at the target name to avoid the broken
COFF check.
(bfd_reloc_code_real_type): Add BFD_RELOC_PPC_B26,
BFD_RELOC_PPC_BA26 and BFD_RELOC_PPC_TOC16.
* bfd-in2.h: Rebuilt.
Fri Feb 4 17:28:32 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* libbfd.c (bfd_zmalloc): Call bfd_xmalloc instead of malloc.
(bfd_xmalloc, bfd_xmalloc_by_size_t): Functions deleted.
* libbfd-in.h: Define them as macros calling xmalloc and declare
xmalloc.
* libbfd.h: Rebuilt.
Thu Feb 3 16:49:35 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecofflink.c (bfd_ecoff_debug_externals): If a small undefined
symbol has a value in the ECOFF symbol but not in the BFD symbol,
keep the value in the ECOFF symbol. This helps gas.
* linker.c (_bfd_generic_link_output_symbols,
_bfd_generic_link_write_global_symbol): Don't require that all
references to a common symbol be themselves common symbols.
* aoutx.h (aout_reloc_index_to_section): Handle N_UNDF.
Wed Feb 2 20:37:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* libbfd.c, bfd-in.h, hosts/alphaosf.h, hosts/sparc-ll.h, aoutf1.h,
sparclynx.c, Makefile.in: Change HOST_64_BIT to BFD_HOST_64_BIT.
1994-02-03 12:03:11 +08:00
* bfd-in2.h: Rebuilt.
Wed Feb 2 12:30:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffswap.h (coff_swap_reloc_out): If RS6000COFF_C, handle type
and size correctly.
(coff_swap_aux_in): If RS6000COFF_C, change x_csect.x_scnlen to
x_csect.x_scnlen.l to match change in coff/internal.h.
(coff_swap_aux_out): Likewise.
* coff-mips.c (mips_ecoff_backend_data), coff-alpha.c
(alpha_ecoff_backend_data): Change casts of aux_in and aux_out
fields to match yesterday's changes.
* coffcode.h (coff_write_relocs): If SELECT_RELOC is defined, pass
in the internal_reloc itself, not the type.
* coff-apollo.c, coff-h8300.c, coff-h8500.c, coff-i386.c,
coff-m68k.c, coff-sh.c, coff-we32k.c, coff-z8k.c: Changed
definition of SELECT_RELOC accordingly.
Tue Feb 1 12:05:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffcode.h (bfd_coff_backend_data): Added new arguments to
_bfd_coff_swap_aux_in and _bfd_coff_swap_aux_out: aux index number
and number of aux entries.
(bfd_coff_swap_aux_in, bfd_coff_swap_aux_out): Changed
accordingly.
* libcoff.h: Rebuilt.
* coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Accept new
arguments. If RS6000COFF_C, only treat C_EXT and C_HIDEXT
specially if this is the last aux entry.
* coffgen.c (coff_write_symbol, coff_get_normalized_symtab): Pass
new arguments to swap_aux functions.
Sun Jan 30 15:14:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* gen-aout.c (main): Set DEFAULT_ARCH based on preprocessor macros
(only testing for m68k and vax at the moment); do verify that the
preprocessor didn't trash the arch name inside the string version.
Don't print out "pagesize =" line that prevents output from
compiling. Derive BYTES_IN_WORD and ARCH values from sizeof
results.
* Makefile.in (aout-params.h): Pass gen-aout a dummy target name.
(check, installcheck): Identify directory in "no testsuites"
message.
Sun Jan 30 13:25:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (aout_link_write_symbols): Write out correct value for
object file symbol.
Fri Jan 28 18:34:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* hosts/vaxbsd.h (HOST_STACK_END_ADDR): Vax BSD doesn't define
KERNBASE, so hard-code 0x80000000 instead.
Thu Jan 27 13:54:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* linker.c (generic_link_add_symbol_list): If symbol is common,
set the BSF_OLD_COMMON flag.
Wed Jan 26 13:47:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* format.c (bfd_check_format_matches): Put the new entry in the
correct element of matching_vector.
Tue Jan 25 11:43:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* som.c, som.h (bfd_som_set_section_attributes,
bfd_som_set_subsection_attributes): Change parameters from char
to int. Following a prototype with an old-style function definition
in the presence of widened parameters is a GCC-ism not supported
by the HP compiler in ANSI mode.
Tue Jan 25 11:46:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* reloc.c (bfd_get_reloc_size): Size of type -2 is 4 bytes, not 2.
* hp300hpux.c (MY(write_object_contents)): Write out the symbols
before writing out the relocs, so that the right symbol indices
are used.
* archive.c (do_slurp_bsd_armap, bfd_slurp_bsd_armap_f2): Do not
try to overlay the internal carsyms on the external symdefs. That
can not work if the size of a host pointer is larger than 4 bytes.
* format.c (bfd_check_format_matches): Cast result of
bfd_xmalloc_by_size_t.
* opncls.c (_bfd_new_bfd): Avoid ANSI C prototype.
* archive.c: Reindented to GNU standards.
Mon Jan 24 14:41:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* opncls.c (_bfd_new_bfd, _bfd_new_bfd_contained_in): Add
"_bfd_" to function names.
* archive.c (_bfd_create_empty_archive_element_shell),
libbfd-in.h: Change callers.
* libbfd.c (bfd_zmalloc): Renamed from zalloc.
* libbfd.c (bfd_add_to_string_table),
trad-core.c (trad_unix_core_file_p),
targets.c (bfd_target_list),
ptrace-core.c (ptrace_unix_core_file_p),
opncls.c (new_bfd), libbfd-in.h,
ieee.c (ieee_make_empty_symbol),
elf32-hppa.c (hppa_elf_stub_branch_reloc),
(hppa_elf_stub_reloc): Change callers.
* libbfd.h: Regenerated.
* archive.c (_bfd_look_for_bfd_in_cache): Add "_bfd_" to name.
(_bfd_get_elt_at_filepos),
coff-rs6000.c (rs6000coff_get_elt_at_filepos), libbfd-in.h:
Change callers.
* format.c (bfd_check_format_matches), libbfd-in.h, targets.c,
elfcode.h (elf_object_p): Rename target_vector to bfd_target_vector
and default_vector to bfd_default_vector.
* libbfd.h: Regenerated.
* format.c (bfd_check_format_matches): New function.
(bfd_check_format): Call it.
(bfd_matching_formats): Function removed.
* targets.c: Replace the vector added on Jan 21 with a count of
entries in default_vector.
* bfd-in2.h: Regenerated.
Mon Jan 24 12:38:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coff-alpha.c (alpha_ecoff_object_p): New function. Set size of
.pdata section based on lnnoptr field, not section header.
(alpha_relocate_section): Don't bother to check if r_symndx >= 0,
since it is unsigned.
(ecoffalpha_little_vec): Use alpha_ecoff_object_p rather than
coff_object_p.
* ecoff.c (ecoff_new_section_hook): Set alignment_power field of
.pdata section to 3.
(ecoff_compute_section_file_positions): Save the size of the
.pdata section in the line_filepos field, and actually align the
.pdata section to an alignment power of 4.
(ecoff_compute_reloc_file_positions): Set output_has_begun after
calling ecoff_compute_section_file_positions.
(ecoff_write_object_contents): Set s_lnnoptr for the .pdata
section from the line_filepos field. Set vstamp for the optional
header from the vstamp of the symbolic header.
(ecoff_bfd_final_link): Set vstamp of the symbolic header to the
vstamp used by the first object file in the link.
* ecofflink.c (ecoff_align_debug): Align RFDs to debug_align.
* linker.c (generic_link_check_achive_element): Set SEC_ALLOC flag
for a created common section.
(_bfd_generic_link_add_one_symbol): Likewise.
* elfcode.h (swap_out_syms): Use elf_section_from_bfd_section to
get the index of a common section, rather than always using
SHN_COMMON (MIPS has multiple common sections).
* elf32-hppa.c (hppa_elf_gen_reloc_type): Typo (== for =).
* bfd/aoutx.h (aout_link_input_section_std,
aout_link_input_section_ext): Pass additional arguments to
reloc_overflow callback.
* coff-alpha.c (alpha_ecoff_get_relocated_section_contents,
alpha_relocat_section): Likewise.
* coff-h8300.c (h8300_reloc16_extra_cases): Likewise.
* coff-h8500.c (extra_case): Likewise.
* coff-mips.c (mips_relocate_section): Likewise.
* coff-z8k.c (extra_case): Likewise.
* elf32-hppa.c (hppa_elf_stub_finish): Likewise.
* reloc.c (bfd_generic_get_relocated_section_contents): Likewise.
* bout.c (calljx_callback, callj_callback): Use get_value to get
the symbol value and check for undefined symbols.
(get_value): If the symbol is undefined, look it up in the linker
hash table.
(b_out_get_relocated_section_contents): For PCREL24 and PCREL13
use get_value to get the symbol value and check for undefined
symbols.
* reloc16.c (bfd_coff_reloc16_get_value): If the symbol is
undefined, look it up in the linker hash table.
* aoutx.h (translate_symbol_table): The string index 0 has a
special meaning for normal symbols, but not for dynamic symbols.
Sat Jan 22 12:26:01 1994 Stu Grossman (grossman at cygnus.com)
* sparclynx.c: Setup appropriate macros to enable core file
support.
Fri Jan 21 16:25:35 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* targets.c: Add a vector of matching format names.
* format.c (bfd_matching_formats): New function to return it.
(bfd_check_format): Set it.
* bfd-in2.h: Regenerated.
* bfd-in.h: Remove decls of bfd_ec type and error printing functions.
Remove decl of type symclass; wasn't used.
* bfd.c: Document error handling, including code fragments
containing the error decls that were in bfd-in.h.
Remove DEFUNs.
* bfd-in2.h: Regenerated.
Fri Jan 21 14:11:16 1994 Sean Fagan (sef@cygnus.com)
1994-01-22 06:52:45 +08:00
* nlmcode.h, liblnm.h, nlm32-alpha.c nlm32-i386.c nlm32-sparc.c:
The sparc (and possibly other?) NLM format requires a different
way to write exports, so add a write_export field to the backend
data (and set it to NULL for everything but the sparc).
Fri Jan 21 14:11:16 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* sunos.c (MY(read_dynamic_relocs)): Compare info->dynrel with NULL,
not (struct external_nlist *) NULL. info->dynrel is a PTR, not
a struct external_nlist *.
Fri Jan 21 09:29:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* bfd.c: Remove error strings for errors removed below.
* aoutx.h (translate_to_native_sym_flags), bfd-in.h (bfd_ec),
oasys.c (oasys_write_sections): Rename
bfd_error_nonrepresentable_section to nonrepresentable_section.
None of the other bfd error names start with "bfd_error".
Remove errors symbol_not_found and no_relocation_info, which seem
to be unused.
* bfd-in2.h: Regenerated.
Fri Jan 21 01:11:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* bfd.c (bfd_get_gp_size): Added support for ELF.
* syms.c (BSF_DYNAMIC): New symbol flag.
(bfd_print_symbol_vandf): Print it.
* bfd-in2.h: Rebuilt.
* libaout.h (struct aout_backend_data): New read_dynamic_symbols
and read_dynamic_relocs fields.
(struct aoutdata): New dynamic_info field.
(obj_aout_dynamic_info): New accessor macro.
* sunos.c (struct sunos_dynamic_info): New structure.
(sunos_read_dynamic_info, MY(read_dynamic_symbols),
MY(read_dynamic_relocs)): New functions to read dynamic symbols
and relocs.
* aoutx.h (NAME(aout,some_aout_object_p)): If the object is
dynamically linked, set SEC_RELOC for both the .text and .data
sections.
(translate_from_native_sym_flags): Don't set BSF_LOCAL for an
undefined symbol.
(translate_symbol_table): New function, split out of
slurp_symbol_table; set the BSF_DYNAMIC flag appropriately.
(NAME(aout,slurp_symbol_table)): Read dynamic symbols, if any.
(NAME(aout,slurp_reloc_table)): Read dynamic relocs, if any.
(NAME(aout,get_reloc_upper_bound)): Include dynamic reloc count in
return value.
* aoutf1.h (NAME(aout,sunos4_write_object_contents)): Don't write
out dynamic symbols or relocs against reloc symbols, since they
are already in the .text section and we wouldn't know where to
write them anyhow.
(sunos4_aout_backend): Initialize read_dynamic_symbols and
read_dynamic_relocs fields.
* aout-target.h (MY(backend_data)): Initialize
read_dynamic_symbols and read_dynamic_relocs fields.
Thu Jan 20 20:57:27 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* hosts/alphaosf.h (uint64e_type, uint64_type, int64_type): Delete
typedefs, since HOST_64_BIT will take care of defining them in
bfd.h.
1994-01-20 08:07:58 +08:00
Wed Jan 19 17:28:59 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/alphaosf.mh (HDEFINES): Don't define HOST_64_BIT here;
that's dealt with elsewhere.
* hosts/alphaosf.h (sprintf_vma, fprintf_vma): New macros.
(uint64_typeHIGH, uint64_typeLOW): Comment with HOST_64_BIT so
they get copied to bfd.h.
* reloc.c (enum bfd_reloc_code_real): Add some Alpha relocation
types. Reorganized some of the existing ones.
* coff-alpha.c (alpha_howto_table): Construct 64-bit negative one
values in case of compilation on a 32-bit machine. Fix pcrel
fields of some reloc types.
(alpha_bfd_reloc_type_lookup): Handle more relocation types.
* bfd-in.h (uint64_typeHIGH, uint64_typeLOW): Supply default
definitions when not defined, regardless of whether uint64_type is
a defined macro or not.
(fprintf_vma, sprintf_vma): Define only if fprintf_vma is not
already defined.
Wed Jan 19 00:02:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (translate_to_native_sym_flags): Set the type of a
BSF_WARNING symbol to N_WARNING.
Tue Jan 18 16:43:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (aout_link_add_symbols): Increment sym_hash as well as p
for an indirect or warning symbol.
(aout_link_write_symbols): Update sym_hash with the target of an
indirect or warning symbol. If an indirect symbol is defined,
output the calculated value and don't output the target symbol.
Tue Jan 18 03:54:59 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* aoutx.h (translate_from_native_sym_flags): Give warning symbols
an (unused) nonzero section value, needed for check below.
Mon Jan 17 15:12:07 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* aoutx.h (translate_from_native_sym_flags,
aout_link_add_symbols): Treat N_SET[ABDT] | N_EXT like
N_SET[ABDT].
Fri Jan 14 16:45:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elfcode.h (elf_object_p): If there is a SHT_DYNAMIC section, set
the DYNAMIC flag for the BFD.
(NAME(bfd_elf,write_object_contents)): Don't try to write out a
BFD with the DYNAMIC flag set, since we don't generate the program
header table correctly.
Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* elfcode.h (elf_slurp_symbol_table): Free x_symp at the end
of the function to avoid storage leak.
Thu Jan 13 23:07:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_link_write_external): An ifd can be -1.
Thu Jan 13 12:33:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_set_reloc_info): Provide a default symbol for
relocations which don't actually have an associated symbol.
* som.c (hppa_som_reloc): Add new "error message" argument.
Wed Jan 12 13:36:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
Enable gdb to write to core files on more core file readers.
* libbfd.c (bfd_generic_set_section_contents): Remove range check
for section size, it is already done in bfd_set_section_contents
with bfd_get_section_size_now.
* aix386-core.c, hppabsd-core.c, hpux-core.c, irix-core.c,
osf-core.c, ptrace-core.c, trad-core.c (*_set_section_contents):
Use bfd_generic_set_section_contents instead of bfd_false.
Wed Jan 12 15:31:57 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* linker.c: Added initial documentation.
* linker.c (default_indirect_link_order): Don't expect space for
output relocations if there aren't any input relocations.
Tue Jan 11 14:37:12 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* aoutx.h (NAME(aout,final_link)): Set a_entry before computing
file offsets.
* elfcode.h (swap_out_syms): A common symbol is STT_OBJECT, not
STT_NOTYPE.
Tue Jan 11 09:10:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* config.bfd: Use ELF, not COFF for m88*-*-dgux*.
Combine m88k-*-* and m88110-*-* cases into m88*-*-*.
* ecofflink.c: Extensive changes to compress and merge debugging information, and to write some of out directly rather than saving it in memory. Several new functions and structures, and new arguments to existing functions. * ecoff.c (ecoff_compute_reloc_file_positions): Compute sym_filepos as well. (ecoff_get_extr): Use ifdmap instead of ifdbase. (ecoff_write_object_contents): Don't compute sym_filepos here. Only output symbols if outsymbols is not NULL. (ecoff_bfd_final_link): Adjust for changes in ecoff_debug_info and bfd_ecoff_debug functions. Write out debugging information here. (ecoff_final_link_debug_accumulate): Adjust for changes in bfd_ecoff_debug functions. (ecoff_link_write_external): Use ifdmap rather than ifdbase. * elf32-mips.c (mips_elf_read_ecoff_info): Read external symbols first, to put them in the first memory buffer. Clear fdr field. (mips_elf_get_extr): Use pointer to unswapped external symbol. (mips_elf_final_link): Adjust for changes in bfd_ecoff functions. Preserve .text, .data and .bss even if they are empty. Save pointer to unswapped external symbol rather than copying it. Don't free up the external symbols. * libelf.h (elf_symbol_type): Change mips_extr to PTR. * bfd-in.h (bfd_ecoff_debug_init, bfd_ecoff_debug_free): Declare. (bfd_ecoff_debug_accumulate): Update declaration. (bfd_ecoff_debug_accumulate_other): Rename declaration from bfd_ecoff_debug_link_other and update. (bfd_ecoff_write_accumulated_debug): Declare. * bfd-in2.h: Rebuilt. * Makefile.in: Rebuilt dependencies.
1994-01-12 00:23:41 +08:00
Tue Jan 11 00:07:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecofflink.c: Extensive changes to compress and merge debugging
information, and to write some of out directly rather than saving
it in memory. Several new functions and structures, and new
arguments to existing functions.
* ecoff.c (ecoff_compute_reloc_file_positions): Compute
sym_filepos as well.
(ecoff_get_extr): Use ifdmap instead of ifdbase.
(ecoff_write_object_contents): Don't compute sym_filepos here.
Only output symbols if outsymbols is not NULL.
(ecoff_bfd_final_link): Adjust for changes in ecoff_debug_info and
bfd_ecoff_debug functions. Write out debugging information here.
(ecoff_final_link_debug_accumulate): Adjust for changes in
bfd_ecoff_debug functions.
(ecoff_link_write_external): Use ifdmap rather than ifdbase.
* elf32-mips.c (mips_elf_read_ecoff_info): Read external symbols
first, to put them in the first memory buffer. Clear fdr field.
(mips_elf_get_extr): Use pointer to unswapped external symbol.
(mips_elf_final_link): Adjust for changes in bfd_ecoff functions.
Preserve .text, .data and .bss even if they are empty. Save
pointer to unswapped external symbol rather than copying it.
Don't free up the external symbols.
* libelf.h (elf_symbol_type): Change mips_extr to PTR.
* bfd-in.h (bfd_ecoff_debug_init, bfd_ecoff_debug_free): Declare.
(bfd_ecoff_debug_accumulate): Update declaration.
(bfd_ecoff_debug_accumulate_other): Rename declaration from
bfd_ecoff_debug_link_other and update.
(bfd_ecoff_write_accumulated_debug): Declare.
* bfd-in2.h: Rebuilt.
* Makefile.in: Rebuilt dependencies.
Mon Jan 10 20:46:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (install): Remove "@" which follows a backslash. In
this position it just causes errors, not suppresses echoes.
Mon Jan 10 09:06:21 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (hppa_som_gen_reloc_type): Fix handling of LT and RT
field selectors.
Sun Jan 9 04:32:25 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/i386-netbsd.mt (SELECT_VECS): Include i386bsd_vec.
Fri Jan 7 10:27:27 1994 David J. Mackenzie (djm@rtl.cygnus.com)
* aoutx.h (adjust_z_magic): Don't merge the start of bss with the
end of data if they are not contiguous.
* aoutf1.h (sunos4_aout_backend): Comment the fields' meanings.
Fri Jan 7 15:40:16 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_mkobject_hook): Don't set SEC_SHARED_LIBRARY flag
for .reginfo section here.
(ecoff_new_section_hook): Set it here instead.
Fri Jan 7 10:29:27 1994 Stan Shebs (shebs@andros.cygnus.com)
* bfd-in.h: (bfd_boolean): Add workaround for systems that also
define true and false as enums.
(ALMOST_STDC): Add as alternative to __STDC__.
* bfd-in2.h: Rebuilt.
* syms.c (bfd_print_symbol_vandf): Convert a PTR to FILE*.
Thu Jan 6 14:24:44 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* aoutx.h (translate_to_native_sym_flags): Catch the case where
there is no output section.
1994-01-07 04:05:44 +08:00
Thu Jan 6 14:37:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1994-01-07 09:24:33 +08:00
* nlmcode.h (nlm_object_p): If we can't read the fixed header,
count it as a wrong format error, not a system call error, since
the object file might simply be too small.
* targets.c (target_vector): Added nlm32_alpha_vec inside #ifdef
BFD64.
* Makefile.in (BFD32_BACKENDS): Remove nlm32-alpha.o.
(BFD64_BACKENDS): Add nlm32-alpha.o. It depends on 64 bit
support, even though it is for an Alpha in 32 bit mode.
* configure.in (nlm32_alpha_vec): Set target64 to true.
* nlm32-gen.c, nlm64-gen.c: Removed. All nlm targets are
different, so there is no point to providing a generic one.
* libnlm.h: Don't bother to check for nlm_backend(bfd) being NULL
in the backend accessor macros; that should no longer be possible.
* targets.c (target_vector): Removed nlm32_big_generic_vec,
nlm64_big_generic_vec, nlm64_little_generic_vec.
* configure.in (nlm32_big_generic_vec, nlm32_little_generic_vec,
nlm64_big_generic_vec, nlm64_little_generic_vec): Removed.
* Makefile.in: Rebuilt dependencies, and
(BFD32_BACKENDS): Removed nlm32-gen.o.
(BFD64_BACKENDS): Removed nlm64-gen.o.
(CFILES): Removed nlm32-gen.c and nlm64-gen.c.
* hp300hpux.c (ARCH_SIZE): Define before including aoutx.h.
1994-01-07 04:05:44 +08:00
* linker.c (_bfd_generic_link_add_one_symbol): Add constructor and
bitsize arguments. Changed all callers (aoutx.h).
* libbfd-in.h (_bfd_generic_link_add_one_symbol): Add constructor
and bitsize arguments to declaration.
* libbfd.h: Rebuilt.
* ecoff.c: First cut at new style of linker backend for
ECOFF--added a bunch of functions. Also:
(ecoff_sec_to_styp_flags): Set flags for .pdata and .xdata.
(ecoff_slurp_symbolic_header): New function.
(ecoff_slurp_symbolic_info): Call ecoff_slurp_symbolic_header.
(ecoff_compute_reloc_file_positions): New function.
(ecoff_set_section_contents): Get out quickly if count is zero.
Check errors better.
(ecoff_write_object_contents): Put .xdata section in data segment.
Call ecoff_compute_reloc_file_positions. Don't output relocs or
external symbols if outsymbols is NULL.
(ecoff_bfd_final_link): Completely rewritten.
* libecoff.h: Include bfdlink.h.
(struct ecoff_backend_data): Add relocate_section field.
(ecoff_data_type): Add sym_hashes and symndx_to_section fields.
(struct ecoff_link_hash_entry): Define.
(struct ecoff_link_hash_table): Define.
(ecoff_bfd_link_add_symbols): Declare as function, not macro.
(ecoff_bfd_link_hash_table_create): Likewise.
* ecofflink.c (bfd_ecoff_debug_one_external): New function.
(bfd_ecoff_debug_externals): Call bfd_ecoff_debug_one_external.
* bfd-in.h (bfd_ecoff_debug_one_external): Declare.
* bfd-in2.h: Rebuilt.
* coff-alpha.c (alpha_howto_table): Mark BRADDR as
partial_inplace, and set the src_mask to 0x1fffff.
(alpha_ecoff_get_relocated_section_contents): Remove unused
variable gp_warned.
(alpha_convert_external_reloc): New static function.
(alpha_relocate_section): New static function.
(alpha_ecoff_backend_data): Initialize relocate_section field.
* coff-mips.c (mips_relocate_refhi): New static function.
(mips_relocate_section): New static function.
(mips_ecoff_backend_data): Initialize relocate_section field.
* reloc.c (_bfd_relocate_contents): Corrected signed overflow
checking when there is an addend.
* aoutx.h (NAME(aout,final_link)): Don't abort when trying to link
a non a.out file, just pass it to _bfd_default_link_order.
(aout_link_input_section_std): When doing a final PC relative link
against a section symbol, subtract the VMA of the input section.
(aout_link_input_section_ext): Likewise.
* linker.c (default_indirect_link_order): Renamed from
_bfd_generic_indirect_link_order and made static.
(_bfd_generic_final_link): Don't switch on link_order type, just
call _bfd_default_link_order.
(_bfd_default_link_order): Handle bfd_indirect_link_order type.
* genlink.h: Removed declaration of
_bfd_generic_indirect_link_order.
* elf32-mips.c (mips_elf_final_link): Don't switch on link_order
type, just call _bfd_default_link_order.
Tue Jan 4 21:23:37 1994 Ian Lance Taylor (ian@cygnus.com)
* linker.c (generic_link_check_archive_element): Base the name of
the created common section on the name of the section the symbol
came from.
(_bfd_generic_link_add_one_symbol): (case BIG): A common symbol
must have a section, so don't bother to create one.
Mon Jan 3 15:32:16 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* aout-target.h (MY(vec)): Add DYNAMIC to mask of object flags.
* aoutf1.h (NAME(aout,sunos4_write_object_contents)):
If the DYNAMIC flag is set, set it in the exec header.
* aoutx.h (NAME(aout,some_aout_object_p)): If the object is
dynamically linked, set the DYNAMIC flag in the BFD.
* libaout.h (N_SET_DYNAMIC): New macro.
(N_DYNAMIC): Add missing 0 in mask.
1994-01-04 00:47:46 +08:00
Mon Jan 3 11:41:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1994-01-07 04:05:44 +08:00
* ecoff.c (ecoff_get_extr): Don't output section symbols as
external symbols.
* bfd-in.h, hash.c: Change bfd_hash_allocate argument from size_t
to unsigned int, because size_t may not be defined in bfd.h.
* bfd-in2.h: Rebuilt.
* bfd-in.h (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to
be a const pointer.
* bfd-in2.h: Rebuilt.
* libbfd.c (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to
be a const pointer.
* targets.c (bfd_target): Change swap function pointers
accordingly.
* archive.c (do_slurp_coff_armap): Change swap accordingly.
* aix386-core.c: Change NO_GET and NO_GETS accordingly.
* hppabsd-core.c, hpux-core.c, irix-core.c, osf-core.c,
ptrace-core.c, trad-core.c: Change NO_GET and NO_SIGNED_GET
accordingly.
* libbfd-in.h (struct artdata): Added tdata field.
(_bfd_add_bfd_to_archive_cache): Declare.
(_bfd_get_elt_at_filepos): Declare.
(_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr.
* libbfd.h: Rebuilt.
* archive.c: Cleaned up some more.
(_bfd_generic_mkarchive, bfd_generic_archive_p): Initialize
pointer elements of artdata.
(_bfd_add_bfd_to_archive_cache): Renamed from add_bfd_to_cache.
(_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr.
(_bfd_get_elt_at_filepos): Renamed from get_elt_at_filepos.
(get_extended_arelt_filename, bfd_construct_extended_name_table,
bfd_ar_hdr_from_filesystem, compute_and_write_armap): Made static.
* ecoff.c: Some comment changes.
(ecoff_slurp_armap): Handle rename of snarf_ar_hdr. Set
ardata->tdata to raw_armap.
(ecoff_archive_p): Initialize pointer elements of artdata.
* coff-rs6000.c (rs6000coff_get_elt_at_filepos): Handle rename of
add_bfd_to_cache.
1994-01-04 00:47:46 +08:00
* hash.c: Added some documentation.
Mon Jan 3 11:09:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* aout-target.h, netbsd386.c: Replace NO_SWAP_MAGIC with SWAP_MAGIC,
and do the swapping here rather than calling ntohl from the N_*
macros. This cleans up assumptions about the size of a host long,
the existence to ntohl, etc.
Sat Jan 1 13:50:05 1994 Rob Savoye (rob@darkstar.cygnus.com)
* config.bfd: Add support for VSTa micro-kernel. It currently uses
i386-aout.
Sat Jan 1 10:18:54 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* hosts/i386mach3.h (HOST_SEGMENT_SIZE): Fix value.
* i386mach3.c (SEGMENT_SIZE): Fix value.
Fri Dec 31 16:23:43 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Minor cleanups suggested by CodeCenter.
* aoutx.h, coffgen.c, ecoff.c, ecofflink.c, elf.c, libbfd.c,
linker.c, reloc.c, section.c, srec.c: Added /*ARGSUSED*/ as
appropriate.
* aoutx.h (struct external_exec): Removed unnecessary declaration.
(NAME(aout,some_aout_object_p)): Set some tdata pointers to NULL.
(adjust_z_magic): Removed useless variable data_vma.
(stringtab_init): Initialize hash_zero.
(add_to_stringtab): Removed unused fourth argument.
(NAME(aout,swap_std_reloc_out)): Removed useless variable
r_addend.
(aout_link_input_section): Added some casts.
* archive.c (get_extended_arelt_filename, do_slurp_coff_armap,
bfd_ar_hdr_from_filesystem, bsd_write_armap, coff_write_armap):
Minor code rewriting to make it more C like.
(do_slurp_bsd_armap): Added some casts.
* ecoff.c (ecoff_write_object_contents): Removed useless variable
scn_base.
(ecoff_write_armap): Added some casts. Use "" rather than "\0".
* ecofflink.c (bfd_ecoff_write_debug): Added a cast.
* libaout.h (struct internal_exec): Removed unnecessary
declaration.
* linker.c (_bfd_generic_indirect_link_order): Added a cast.
* opncls.c (new_bfd): Removed a cast.
* reloc.c (bfd_generic_get_relocated_section_contents): Added
some casts.
* srec.c (internal_srec_write_object_contents): Removed useless
variable bytes_written.
Fri Dec 31 11:46:13 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* i386mach3.c (N_TXTADDR): Don't define after all.
(TEXT_START_ADDR): Don't include exec header size in value.
1993-12-31 07:48:44 +08:00
Thu Dec 30 15:47:54 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* i386mach3.c (N_TXTADDR): Define.
Extensive changes to move the bulk of the linker into BFD so that more efficient backend code can be written for specific object files. Only existing efficient backend is a.out. * seclet.c, seclet.h: Removed. * hash.c, linker.c, genlink.h: New files. * bfd-in.h: Removed bfd_error_vector. Declared hash table structures and functions. (JUMP_TABLE): Removed bfd_seclet_link, added bfd_link_hash_table_create, bfd_link_add_symbols and bfd_final_link. * All backends: Changed accordingly. * bfd-in2.h: Rebuilt. * bfd.c (struct _bfd): Added link_next and archive_pass fields. Removed ld_symbols field. (bfd_nonrepresentable_section, bfd_undefined_symbol, bfd_reloc_value_truncated, bfd_reloc_is_dangerous, bfd_error_vector): Removed. (bfd_default_error_trap, bfd_error_trap, bfd_error_nonrepresentabltrap): Removed. (bfd_get_relocated_section_contents): Pass link_info. Pass link_order instead of seclet. Pass symbols. (bfd_relax_section): Pass link_info. (bfd_seclet_link): Removed. (bfd_link_hash_table_create, bfd_link_add_symbols, bfd_final_link): New macros. * libbfd-in.h: If __GNUC__ is defined and alloca is not, define alloca as __builtin_alloca. Declare internal linking functions. * libbfd.h: Rebuilt. * libbfd.c (bfd_seek): Comment out fseek assertion. It's worked for months. * reloc.c (reloc_howto_type): Added error_message argument to special_function field. Changed all callers and all definitions. (bfd_get_reloc_size): Make argument a const pointer. (bfd_perform_relocation): Add error_message argument to hold string set if return value if bfd_reloc_dangerous. Changed all callers. (_bfd_final_link_relocate, _bfd_relocate_contents): New functions. * section.c (asection): Renamed seclets_head and seclets_tail to link_order_head and link_order_tail. * targets.c (bfd_target): Replaced seclet argument with link_info and link_order and symbols arguments in bfd_get_relocated_section_contents. Added symbols argument to bfd_relax_section. Removed bfd_seclet_link. Added bfd_link_hash_table_create, bfd_link_add_symbols and bfd_final_link. * libaout.h (struct aoutdata): Added external_syms, external_sym_count, external_strings, sym_hashes fields. (obj_aout_external_syms, obj_aout_external_sym_count, obj_aout_external_strings, obj_aout_sym_hashes): New accessor macros. (WRITE_HEADERS): Only output symbols if outsymbols is not NULL. * aoutx.h: Wrote new back end linker routines. (translate_to_native_sym_flags): Return boolean value. Don't use bfd_error_vector. (NAME(aout,write_syms)): Return boolean value. Check return value of translate_to_native_sym_flags and bfd_write. * aout-target.h (final_link_callback): New function. (MY_bfd_final_link): New function. * aout-adobe.c (aout_adobe_write_object_contents): Check return value of aout_32_write_syms. * hp300hpux.c (MY(write_object_contents)): Likewise. * i386lynx.c (WRITE_HEADERS): Likewise. * libaout.h (WRITE_HEADERS): Likewise. * bout.c: Changed functions to use link_info->callbacks rather than bfd_error_vector, and link_orders rather than seclets. * coff-alpha.c: Likewise. * coff-h8300.c: Likewise. * coff-h8500.c: Likewise. * coff-sh.c: Likewise. * coff-z8k.c: Likewise. * elf32-hppa.c: Likewise. * reloc16.c: Likewise. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Look up _gp in the hash table rather than in outsymbols. * coff-a29k.c (a29k_reloc): Pass errors back in new error_message argument rather than printing them. * coffcode.h (bfd_coff_reloc16_extra_cases): Take link_info and link_order arguments rather than seclet. Changed all uses and definitions. (bfd_coff_reloc16_estimate): Pass link_info arguments. Changed all uses and definitions. * libcoff.h: Rebuilt. * ecoff.c (ecoff_get_extr): If symbol is defined by linker, but not by ECOFF, make it scAbs. (ecoff_bfd_final_link): Renamed from ecoff_bfd_seclet_link and rewritten. * elf32-mips.c (mips_elf_final_link): Renamed from mips_elf_seclet_link and rewritten. * elf32-hppa.c (elf32_hppa_stub_description): Added link_info field. (new_stub, add_stub_by_name, hppa_elf_build_arg_reloc_stub, hppa_elf_build_long_branch_stub, hppa_look_for_stubs_in_section): Added link_info arguments. Changed all callers. * elfcode.h (elf_slurp_symbol_table): Don't quit if outsymbols is not NULL. * oasys.c (oasys_write_sections): Return boolean value rather than using bfd_error_vector. (oasys_write_object_contents): Check return value of oasys_write_sections. * hosts/std-host.h: Don't declare qsort or strtol. * Makefile.in: Rebuild dependencies. (BFD_LIBS): Removed seclet.o. Added hash.o and linker.o. (CFILES): Removed seclet.c. Added hash.c and linker.c. (HFILES): Removed seclet.h. Added genlink.h.
1993-12-31 03:56:50 +08:00
Thu Dec 30 13:37:24 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Extensive changes to move the bulk of the linker into BFD so that
more efficient backend code can be written for specific object
files. Only existing efficient backend is a.out.
* seclet.c, seclet.h: Removed.
* hash.c, linker.c, genlink.h: New files.
* bfd-in.h: Removed bfd_error_vector. Declared hash table
structures and functions.
(JUMP_TABLE): Removed bfd_seclet_link, added
bfd_link_hash_table_create, bfd_link_add_symbols and
bfd_final_link.
* All backends: Changed accordingly.
* bfd-in2.h: Rebuilt.
* bfd.c (struct _bfd): Added link_next and archive_pass fields.
Removed ld_symbols field.
(bfd_nonrepresentable_section, bfd_undefined_symbol,
bfd_reloc_value_truncated, bfd_reloc_is_dangerous,
bfd_error_vector): Removed.
(bfd_default_error_trap, bfd_error_trap,
bfd_error_nonrepresentabltrap): Removed.
(bfd_get_relocated_section_contents): Pass link_info. Pass
link_order instead of seclet. Pass symbols.
(bfd_relax_section): Pass link_info.
(bfd_seclet_link): Removed.
(bfd_link_hash_table_create, bfd_link_add_symbols,
bfd_final_link): New macros.
* libbfd-in.h: If __GNUC__ is defined and alloca is not, define
alloca as __builtin_alloca. Declare internal linking functions.
* libbfd.h: Rebuilt.
* libbfd.c (bfd_seek): Comment out fseek assertion. It's worked
for months.
* reloc.c (reloc_howto_type): Added error_message argument to
special_function field. Changed all callers and all definitions.
(bfd_get_reloc_size): Make argument a const pointer.
(bfd_perform_relocation): Add error_message argument to hold
string set if return value if bfd_reloc_dangerous. Changed all
callers.
(_bfd_final_link_relocate, _bfd_relocate_contents): New functions.
* section.c (asection): Renamed seclets_head and seclets_tail to
link_order_head and link_order_tail.
* targets.c (bfd_target): Replaced seclet argument with link_info
and link_order and symbols arguments in
bfd_get_relocated_section_contents. Added symbols argument to
bfd_relax_section. Removed bfd_seclet_link. Added
bfd_link_hash_table_create, bfd_link_add_symbols and
bfd_final_link.
* libaout.h (struct aoutdata): Added external_syms,
external_sym_count, external_strings, sym_hashes fields.
(obj_aout_external_syms, obj_aout_external_sym_count,
obj_aout_external_strings, obj_aout_sym_hashes): New accessor
macros.
(WRITE_HEADERS): Only output symbols if outsymbols is not NULL.
* aoutx.h: Wrote new back end linker routines.
(translate_to_native_sym_flags): Return boolean value. Don't use
bfd_error_vector.
(NAME(aout,write_syms)): Return boolean value. Check return value
of translate_to_native_sym_flags and bfd_write.
* aout-target.h (final_link_callback): New function.
(MY_bfd_final_link): New function.
* aout-adobe.c (aout_adobe_write_object_contents): Check return
value of aout_32_write_syms.
* hp300hpux.c (MY(write_object_contents)): Likewise.
* i386lynx.c (WRITE_HEADERS): Likewise.
* libaout.h (WRITE_HEADERS): Likewise.
* bout.c: Changed functions to use link_info->callbacks rather
than bfd_error_vector, and link_orders rather than seclets.
* coff-alpha.c: Likewise.
* coff-h8300.c: Likewise.
* coff-h8500.c: Likewise.
* coff-sh.c: Likewise.
* coff-z8k.c: Likewise.
* elf32-hppa.c: Likewise.
* reloc16.c: Likewise.
* coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Look
up _gp in the hash table rather than in outsymbols.
* coff-a29k.c (a29k_reloc): Pass errors back in new error_message
argument rather than printing them.
* coffcode.h (bfd_coff_reloc16_extra_cases): Take link_info and
link_order arguments rather than seclet. Changed all uses and
definitions.
(bfd_coff_reloc16_estimate): Pass link_info arguments. Changed
all uses and definitions.
* libcoff.h: Rebuilt.
* ecoff.c (ecoff_get_extr): If symbol is defined by linker, but
not by ECOFF, make it scAbs.
(ecoff_bfd_final_link): Renamed from ecoff_bfd_seclet_link and
rewritten.
* elf32-mips.c (mips_elf_final_link): Renamed from
mips_elf_seclet_link and rewritten.
* elf32-hppa.c (elf32_hppa_stub_description): Added link_info
field.
(new_stub, add_stub_by_name, hppa_elf_build_arg_reloc_stub,
hppa_elf_build_long_branch_stub, hppa_look_for_stubs_in_section):
Added link_info arguments. Changed all callers.
* elfcode.h (elf_slurp_symbol_table): Don't quit if outsymbols is
not NULL.
* oasys.c (oasys_write_sections): Return boolean value rather than
using bfd_error_vector.
(oasys_write_object_contents): Check return value of
oasys_write_sections.
* hosts/std-host.h: Don't declare qsort or strtol.
* Makefile.in: Rebuild dependencies.
(BFD_LIBS): Removed seclet.o. Added hash.o and linker.o.
(CFILES): Removed seclet.c. Added hash.c and linker.c.
(HFILES): Removed seclet.h. Added genlink.h.
Thu Dec 30 07:41:36 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* section.c (bfd_get_section_contents): Return zero filled buffer
if section has no contents.
Tue Dec 28 12:43:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elf.c (bfd_elf_generic_reloc): If this is not an inplace reloc,
then skip bfd_perform_relocation even if the addend is non-zero.
1993-12-22 01:47:38 +08:00
Tue Dec 21 09:22:19 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
* coffcode.h (coff_write_relocs) [SWAP_OUT_RELOC_OFFSET]: Copy
addend to r_offset field.
* Makefile.in (CFILES): Added coff-sparc.c. Rebuild dependencies.
* coff-sparc.c (SWAP_IN_RELOC_OFFSET, SWAP_OUT_RELOC_OFFSET,
CALC_ADDEND): Define.
* aix386-core.c (aix386_core_file_p): Use cd_regs[0] for computing
the offsetof because AIX /bin/cc does not like to take the address
of an array. (From Minh Tran-Le.)
Thu Dec 16 13:06:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1993-12-22 01:47:38 +08:00
* Thu Dec 16 15:41:06 1993 Peter Hoogenboom (hoogen@cs.utah.edu)
* elf32-hppa.c (hppa_elf_build_arg_reloc_stub): Make sure to copy
the return pointer into %r2 if no jump-in-call-delay-slot
optimization was done.
* hosts/hp300bsd.h: Correctly identify 4.3BSD vs 4.4BSD.
1993-12-16 01:08:52 +08:00
Wed Dec 15 08:04:16 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* hosts/std-host.h: (time): Don't declare; conflicts on Mach3.
* hosts/i386mach3.h (HOST_PAGE_SIZE): Set to 1 to avoid padding.
(HOST_SEGMENT_SIZE): Set to 0 for same reason.
* i386mach3.c (PAGE_SIZE, SEGMENT_SIZE): Same changes as above.
(TEXT_START_ADDR): Correct.
(MY_backend_data): Define.
* aoutx.h (adjust_o_magic, adjust_z_magic, adjust_n_magic):
New functions; code moved from aout_<size>_adjust_sizes_and_vmas.
Tue Dec 14 21:48:33 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_begin_writing): Fix thinkos in auxiliary header
support.
(bfd_som_attach_aux_hdr): Likewise.
Mon Dec 13 23:34:48 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* elf32-hppa.c (hppa_elf_gen_reloc_type): Handle 'T' field
selectors for PIC code.
* som.c (hppa_som_gen_reloc_type): Handle 'T' field selectors.
(som_write_fixups): Handle R_DLT_REL, R_FSEL, R_RSEL, R_LSEL
relocations needed by PIC.
Tue Dec 7 15:47:51 1993 Stu Grossman (grossman at cygnus.com)
* nlmcode.h: Fixes to avoid compiler warnings...
Tue Dec 7 15:10:54 1993 Ian Lance Taylor (ian@cygnus.com)
* libnlm.h (nlm_backend_data): Removed macro definition.
(nlm_alpha_backend_data): Adjusted accordingly.
Sun Dec 5 19:32:08 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_begin_writing): Flesh out code for handling simple
auxiliary headers.
(bfd_som_attach_aux_hdr): New function.
* som.h (struct somdata): Add fields for attaching version and
copyright headers. Add accessor macros.
* som.c (R_DLT_REL, R_AUX_UNWIND, R_SEC_STMT): Add protected
definitions for old versions of HPUX which fail to define them.
(som_hppa_howto_talbe): Add R_DLT_REL, R_AUX_UNWIND, and R_SEC_STMT
now that they're safe. Delete bogus R_STATEMENT relocations.
* som.c (som_hppa_howto_table): Add missing R_END_TRY. Delete
extra R_DATA_OVERRIDE.
(hppa_som_gen_reloc_type): Generate a relocation for the rounding
mode selector if needed.
(som_write_fixups): Handle requests for a change in the default
rounding mode. Rounding modes do not consume input bytes, but
are just markers much like R_ENTRY and R_EXIT.
Sat Dec 4 19:40:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
Fri Dec 3 09:55:17 1993 Pete Hoogenboom (hoogen@cs.utah.edu)
* elf32-hppa.c: (hppa_elf_reloc): Do not do code reordering when
the branch instruction as originally been nullified.
hppa_elf_reloc): Avoid useless call to bfd_put_32 () in the
case of no code reordering due to an LDO instruction in the
delay slot of the branch. Make sure to relocate the correct
instruction. Do not perform instruction reordering for millicode
calls.
(hppa_elf_build_arg_reloc_stub): Change the relocation type
to R_HPPA_STUB_CALL_17 when special processing might be needed.
(hppa_elf_build_long_branch_stub): Prevent code reordering on
a call from a linker stub to another linker stub and for millicode
calls. Do not trash the return register for calls from one linker
stub to a second linker stub.
* elf32-hppa.c: (elf_hppa_howto_table): PLABEL and DLT
relocations are not pc-relative.
* hppa_stubs.h: (BLE_N_XXX_0_31): New instruction used in
linker stub code.
(COPY_2_31): Likewise.
Fri Dec 3 18:40:58 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/solaris2.mh (HDEFINES): Remove -Dconst=
* hosts/solaris.h: If not __GNUC__, define const as empty.
Thu Dec 2 15:43:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c: Added various casts for 32/64 bit cross targeting.
(ecoff_mkobject_hook): Set SEC_SHARED_LIBRARY for the .reginfo
section so that the linker ignores it.
* ecofflink.c: Added various casts for 32/64 bit cross targeting.
(ecoff_add_bytes): Changed need argument to size_t.
(bfd_ecoff_debug_link_other): Check return value of
ecoff_add_string.
* libbfd-in.h (new_bfd): Use void rather than an empty parameter
list.
* libbfd.h: Rebuilt.
* libnlm.h (struct nlm_obj_tdata): New field backend_data.
(nlm_backend_data, nlm_alpha_backend_data): New accessor macros.
(struct nlm_backend_data): New field no_uninitialized_data.
(nlm_no_uninitialized_data): New accessor macro.
* nlmcode.h (nlm_compute_section_file_positions): Handle
no_uninitialized_data.
(nlm_external_reloc_compare): Sort relocs by address for a
particular symbol, to make the sort more stable.
(nlm_write_object_contents): Cast the arguments to qsort. Get the
value of a debugging symbol the same way we get the value of a
normal symbol.
* nlm32-alpha.c: Various changes. Write out GP and .lita relocs.
Set no_uninitialized_data to true.
* nlm32-i386.c (nlm32_i386_backend), nlm32-sparc.c
(nlm32_sparc_backend): Set no_uninitialized_data field false.
* nlmswap.h (nlm_swap_fixed_header_out): Zero out destination
before filling it in.
Wed Dec 1 21:47:58 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_section_type, som_decode_symcalss): New functions.
(som_get_symbol_info): Use them.
(som_slurp_symbol_table): Set the section of common and undefined
symbols correctly.
1993-12-02 06:37:57 +08:00
Wed Dec 1 14:15:10 1993 Ken Raeburn (raeburn@cygnus.com)
* elfcode.h (write_relocs): Initialize local var LAST_SYM_IDX, to
make gcc happy.
* mipsbsd.c: Changes from Ralph Campbell:
(mips_howto_table_ext): MIPS_RELOC_LO16 should use
complain_overflow_dont.
(aout_mips_*_vec): Make name use "a.out" instead of "aout", to
make gdb happy.
* bfd.c (bfd_errmsgs): Reword invalid-target message.
* config.bfd: For sparc*-*-coff, use sparc-coff.
* configure.in: Handle sparccoff_vec.
* targets.c (sparccoff_vec): Declare.
* reloc.c (bfd_get_reloc_size): New function.
(struct reloc_howto_type): Update documentation of size field.
Wed Dec 1 14:39:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1993-12-02 10:22:59 +08:00
* nlm32-alpha.c: New file; preliminary Alpha NetWare support.
* config.bfd (alpha-*-netware*): New target; use alpha-nlm.
* config/alpha-nlm.mt: New file.
* configure.in (nlm32_alpha_vec): New vector; use nlm32-alpha.o,
nlm32.o, and nlm.o.
* Makefile.in (BFD32_BACKENDS): Added nlm32-alpha.o.
(CFILES): Added nlm32-alpha.c.
Rebuilt dependencies.
* targets.c (nlm32_alpha_vec): Declare.
* libnlm.h (struct nlm_backend_data): New fields
optional_prefix_size, nlm_backend_object_p, nlm_write_prefix,
nlm_set_public_section, nlm_get_public_offset. Removed unused
nlm_write_reloc field. Changed nlm_write_import to remove
unnecessary symbol argument. Renamed nlm_write_externals to
nlm_write_external, and changed cound argument from bfd_vma to
bfd_size_type.
(nlm_optional_prefix_size, nlm_backend_object_p_func,
nlm_write_prefix_func, nlm_set_public_section_func,
nlm_get_public_offset_func): New accessor macros.
(nlm_write_reloc_func): Removed.
(nlm_write_external_func): Adjusted for field renaming.
* nlm32-i386.c (nlm_i386_write_import): Renamed from
nlm_i386_write_reloc. Removed old nlm_i386_write_import which
just called old nlm_i386_write_reloc.
(nlm_i386_write_external): Renamed from nlm_i386_write_externals.
Declared. Changed second argument from bfd_vma to bfd_size_type.
(nlm32_i386_backend): Adjusted for changes to fields and names.
* nlm32-sparc.c (nlm_sparc_mangle_relocs): Removed unused,
ifdeffed out code.
(nlm_sparc_write_import): Removed second argument.
(nlm_sparc_write_external): Renamed from
nlm_sparc_write_externals. Changed second argument from bfd_vma
to bfd_size_type.
(nlm32_sparc_backend): Adjusted for changes to fields and names.
* nlmcode.h: Removed some unused code.
(nlm_object_p): Don't destroy tdata pointer. Call
backend_object_p function if it exists.
(nlm_slurp_symbol_table): Removed unused variable rcount. Call
set_public_section_func if it exists instead of checking
NLM_HIBIT.
(nlm_compute_section_file_positions): Account for
optional_prefix_size.
(nlm_write_object_contents): Account for optional_prefix_size.
Removed useless variable write_reloc_func. Changed declaration
and call of write_import_func. Call write_prefix_func if it
exists. Removed unused variables len and temp. Call
get_public_offset_func if it exists rather than setting NLM_HIBIT.
* nlmswap.h: Declare functions.
* bfd-in.h (uint64_typeLOW, uint64_typeHIGH): Fully parenthesize
for clarity.
(fprintf_vma, sprintf_vma): Use %lx, not %x.
* bfd-in2.h: Rebuilt.
* hosts/alphaosf.h (uint64_typeLOW, uint64_typeHIGH): Cast results
to unsigned long.
* config.bfd: Don't set target64 here, as the setting is ignored.
* configure.in (ecoffalpha_little_vec): Set target64.
* config/alphaosf.mt (TDEFINES): Removed; setting host parameters
in TDEFINES is wrong.
* coff-alpha.c (alpha_ecoff_get_relocated_section_contents):
Remove unused variable output_section.
1993-12-01 05:58:09 +08:00
Tue Nov 30 16:45:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* irix-core.c: New file for Irix 4 and Irix 5 core support.
Functions taken out of coff-mips.c. Handle vmap type VMAPFILE.
* coff-mips.c: Irix 4 core file support moved to irix-core.c.
* targets.c: If IRIX_CORE defined, include irix_core_vec in
target_vector.
* config/irix4.mh (HDEFINES): Add -DIRIX_CORE.
(HDEPFILES): Define to be irix-core.o.
* config/irix5.mh (HDEFINES): Define to be -DIRIX_CORE.
(HDEPFILES): Define to be irix-core.o.
* Makefile.in (OPTIONAL_BACKENDS): Added irix-core.o. Removed
sco-core.o, which no longer exists.
(CFILES): Added all *-core.c files.
Rebuilt dependencies.
Wed Nov 24 02:02:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elfcode.h (map_program_segments): Restore check of file_size !=
mem_size, but only if SHT_PROGBITS.
* ecofflink.c: New file to hold ECOFF debug information linking
routines.
* ecoff.c (ecoff_clear_output_flags, ecoff_rel, ecoff_dump_seclet,
ecoff_add_string, ecoff_get_debug): Removed. Functionality now in
ecofflink.c.
(ecoff_get_extr, ecoff_set_index): New functions.
(ecoff_slurp_symbolic_info): Don't save raw_size.
(ecoff_bfd_seclet_link): Rewrote to use ecofflink.c functions.
(ecoff_compute_section_file_positions): Don't set EXEC_P just
because there is a start address.
(ecoff_write_object_contents): Handle external symbols here. Use
ecofflink.c functions to write out debugging information.
* elf32-mips.c (mips_elf_read_ecoff_info, mips_elf_get_extr,
mips_elf_set_index): New functions.
(mips_elf_seclet_link): Discard empty sections, the .options
section and .gptab sections. Handle linking .mdebug section.
* libecoff.h (ecoff_data_type): Removed raw_size and ifdbase.
* libelf.h (elf_symbol_type): Added mips_extr to tc_data union.
* bfd-in.h: Added prototypes for routines in ecofflink.c (some are
called by gas, so they are public).
* bfd-in2.h: Rebuilt.
* Makefile.in (BFD_LIBS): Added ecofflink.o.
(CFILES): Added ecofflink.c.
(ecofflink.o): New target. Rebuilt dependencies.
Mon Nov 22 22:26:42 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (hppa_object_p): Also recognize SHARED_MAGIC_CNX as
a valid magic number if it's been defined.
Mon Nov 22 14:17:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_mkobject): Don't create .scommon section; linker
no longer requires it.
(ecoff_bfd_seclet_link, ecoff_sizeof_headers,
ecoff_write_object_contents): Don't treat .scommon section
specially.
Mon Nov 22 10:54:27 1993 Fred Fish (fnf@cygnus.com)
Merged changes from kev@spuds.geg.mot.com (Kevin A. Buettner):
* bfd/config/delta88.mh (HDEFINES): Define this to be -DPTRACE_CORE.
* bfd/config/delta88.mh (HDEPFILES): Defined to be ptrace-core.o.
* bfd/ptrace-core.c: New file for dealing with core files with
start with the ptrace_user structure found on BCS compliant systems.
* bfd/targets.c (ptrace_core_vec): New vector.
Mon Nov 22 02:33:12 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* Minimal support for reading SOM fixup streams. Allows
objdump -r to do something reasonable.
* som.c (som_get_reloc_upper_bound): Implement.
(som_canonicalize_reloc): Implement.
(som_set_reloc_info, som_slurp_reloc_table): New functions.
Sun Nov 21 13:46:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* hosts/lynx.h (FPRINTF_ALREADY_DECLARED): Define.
* hosts/sparclynx.h: Include lynx.h instead of duplicating it.
Fri Nov 19 14:34:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coff-a29k.c (a29k_reloc): For R_IREL, don't left shift
signed_value before sign extending it. Don't subtract out
reloc_entry->address. This makes it compatible with what gas is
generating.
* elfcode.h (elf_fake_sections): Accept .sbss as the name for a
SHT_NOBITS sections.
(map_program_segments): Don't leave the loop after the first
SHT_NOBITS section.
(assign_file_positions_except_relocs): Only force sh_offset and
sh_addr to match modulo maxpagesize for a section which is not
SHT_NOBITS. Changed the method used to force page alignment after
a SHT_NOBITS section to only do it for the last such consecutive
section, and to really force page alignment.
1993-11-20 01:00:07 +08:00
Fri Nov 19 04:02:01 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* coffcode.h (coff_slurp_symbol_table): Print more verbose message
in the case of an unknown (or unhandled) storage class.
1993-11-20 01:00:07 +08:00
* config/i386-lynx.mt (TDEFINES): FPRINTF_ALREADY_DECLARED should
not be defined here, since it is a host attribute, not a target
one.
* config/m68k-lynx.mt, config/sparc-lynx.mt: Ditto.
* coffcode.h (coff_bfd_reloc_type_lookup): Don't define if already
defined.
* coff-sparc.c: Define some relocations, based on ELF relocations.
(enum reloc_type, bfd_coff_generic_reloc, coff_sparc_howto_table,
struct coff_reloc_map, sparc_reloc_map,
coff_sparc_reloc_type_lookup): Borrowed from elf32-sparc.c and
elf.c, renamed.
(coff_bfd_reloc_type_lookup): Define to be coff_sparc_reloc_....
(rtype2howto): Index into coff_sparc_howto_table using
dst->r_type.
1993-11-19 01:24:53 +08:00
Thu Nov 18 11:45:39 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config.bfd (mips*-*-irix5*): New target; use mipsbelf.
* configure.host (mips-sgi-irix5*) New host; use irix5 (no
hosts/irix5.h created; just use std-host.h).
* config/irix5.mh: New file; like irix4.mh, but don't use -G or
-lmalloc.
* Makefile.in: Rebuilt dependencies.
* ecoffswap.h: Changed type of internal pointers for swap out
functions to const *.
* elf32-mips.c (mips_elf_got16_reloc): New function. Handle GOT16
correctly for assembler, but linker support not implemented.
(elf_mips_howto_table): Use mips_elf_got16_reloc for GOT16.
(mips_elf_sym_is_global): New function; at least on Irix 5, all
non section symbols are considered global.
(elf_backend_sym_is_global): Define.
(mips_elf_final_write_processing): New function. Set the MIPS
architecture level correctly.
(elf_backend_final_write_processing): Define.
(mips_elf_section_from_shdr): Handle SHT_MIPS_OPTIONS.
(mips_elf_fake_sections): Set entsize of .mdebug or .reginfo
section to 1. Handle .options section.
(mips_elf_acom_section, mips_elf_acom_symbol,
mips_elf_acom_symbol_ptr): New static variables, used to build a
generic .acommon section to hold SHN_MIPS_ACOMMON symbols.
(mips_elf_symbol_processing): Handle SHN_MIPS_ACOMMON symbols by
putting them all in a global .acommon section.
* elfcode.h (bfd_section_from_shdr): Don't dump core if target
section has no ELF section data.
(elf_make_sections): Set addralign of reloc section to 4.
(elf_fake_sections): Likewise.
(map_program_segments): Don't consider section 0.
(assign_file_positions_except_relocs): Don't consider section 0.
In the main loop, skip the symtab and strtab sections, since their
positions are set elsewhere.
(swap_out_syms): Set addralign of symtab section to 4. Set
addralign of strtab sections to 1.
(assign_file_positions_for_relocs): Don't consider section 0.
(write_object_contents): Don't write out section 0.
* libelf.h (struct elf_backend_data): Added fields
elf_backend_sym_is_global and elf_backend_final_write_processing.
* elf32-target.h (elf32_bed): Added corresponding initializers.
* elf64-target.h (elf64_bed): Likewise.
* elfcode.h (sym_is_global): Take abfd argument. Call
elf_backend_sym_is_global if it is not NULL.
(elf_map_symbols): Pass abfd to sym_is_global.
(write_object_contents): Call elf_backend_final_write_processing
if it is defined.
Wed Nov 17 18:43:28 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* libecoff.h: Include coff/ecoff.h.
(struct ecoff_backend_data): Move external debugging information
fields into a single field pointing to an ecoff_debug_swap
structure.
(ecoff_data_type): Move debugging information fields into a single
field pointing to an ecoff_debug_info structure.
* coff-alpha.c, coff-mips.c, ecoff.c: Corresponding changes.
Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
* nlmswap.h: New file to swap fixed header. Included by NLM
backends.
* libnlm.h (struct reloc_and_sec): Define.
(struct nlm_backend_data): Add fields fixed_header_size,
nlm_read_import, nlm_write_import, nlm_swap_fhdr_in,
nlm_swap_fhdr_out.
(nlm_fixed_header_size, nlm_read_import_func,
nlm_write_import_func, nlm_swap_fixed_header_in_func,
nlm_swap_fixed_header_out_func, nlm_write_external_func): New
accessor macros.
* nlmcode.h: Use new functions.
* nlm32-i386.c: Provide new functions.
* nlm32-sparc.c: New file; SPARC NLM backend.
Wed Nov 17 13:56:10 1993 Stan Shebs (shebs@rtl.cygnus.com)
* i386lynx.c (swap_std_reloc_in, swap_ext_reloc_in): Ignore
garbage bits appearing in the upper end of symbolnums.
* config/sparc-lynx.mt (TDEFINES): Add -DFPRINTF_ALREADY_DECLARED.
Tue Nov 16 17:03:41 1993 Stu Grossman (grossman at cygnus.com)
* lynx-core.c (lynx_core_file_p): Change bfd_zalloc to bfd_alloc.
* m68klynx.c: Define core file macros.
* hosts/i386lynx.h, hosts/m68klynx.h, hosts/lynx.h: Move all
non-architecture specific stuff into lynx.h.
Tue Nov 16 15:45:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* i386linux.c: Define new macro ZMAGIC_DISK_BLOCK_SIZE to 1024, and
change PAGE_SIZE to 4096.
Mon Nov 15 11:48:08 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
* Makefile.in (diststuff): New target.
* VERSION: Updated.
1993-11-15 15:34:01 +08:00
Sun Nov 14 23:33:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_object_setup): Do not create dummy ".text", ".data",
and ".bss" sections.
(setup_sections): Do not set SEC_HAS_CONTENTS if a section's size
is zero. Recognize BSS type sections and turn off SEC_LOAD and
SEC_DATA (so binutils/size works). Set the correct value for
a section's _raw_size.
(som_slurp_symbol_table): Program entry points, and millicode are
also functions. Mark them as such. Also mark L$* symbols as
debugging symbols.
1993-11-15 15:34:01 +08:00
* bfd-in2.h: Rebuilt.
Sat Nov 13 15:27:15 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_bfd_reloc_type_lookup): Add missing prototype. Returns
a pointer to constant data. Delete bogus #define which made the
function useless.
* som.c (som_prep_for_fixups): New function.
(som_write_fixups): New function.
(som_write_space_strings): New function.
(som_write_symbol_strings): New function.
(som_begin_writing): New function.
Fri Nov 12 15:29:36 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* som.c (som_write_object_contents): Do not abort. Flesh out.
(som_set_section_contents): Do not abort. Flesh out.
* som.c (som_write_headers): New function.
(som_prep_headers): New function.
(som_build_and_write_symbol_table): New function.
* som.c (som_sizeof_headers): Add missing prototype.
(som_set_arch_mach): Do not abort.
* som.c (som_count_spaces): New function.
(som_count_subspaces): New function.
(compare_syms): New function.
(som_compute_checksum): New function.
* som.c (hppa_som_gen_reloc_type): New function.
(som_bfd_reloc_type_lookup): New function.
* som.c (try_prev_fixup): New function.
(som_reloc_skip): New function.
(som_reloc_addend): New function.
(som_reloc_call): New function.
* som.c (som_initialize_reloc_queue): New function.
(som_reloc_queue_insert): Likewise.
(som_reloc_queue_fix): Likewise.
(som_reloc_queue_find): Likewise.
* som.c (som_hppa_howto_table): SOM howto relocation table.
(hppa_som_reloc): New function.
* som.c (struct reloc_queue): New structure to keep track of
the last four multibyte relocations emitted.
(enum pa_symbol_type): Type to fully describe the symbol types
associated with .import/.export assembler directives.
1993-11-13 07:39:35 +08:00
* som.c: Include libhppa.h
* som.c (bfd_som_set_section_attributes): New function.
(bfd_som_set_subsection_attributes): Likewise.
(bfd_som_set_symboL_type): Likewise.
(bfd_som_attach_unwind_info): Likewise.
* som.h: Declare new exported functions.
* som.h (struct som_symbol): Add new fields to hold additional
information needed to build/write symbol tables and fixup streams.
(struct som_section_data_struct): Add new fields to hold additional
information needed to build/write space and subspace headers.
(som_symbol_data): New accessor macro for SOM symbol information.
(R_HPPA_*): Basic relocation types to be used by the assembler.
Fri Nov 12 11:00:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* trad-core.c (trad_unix_core_file_p): If new hook
TRAD_CORE_ALLOW_ANY_EXTRA_SIZE defined, then skip the check for the
corefile being too big.
* hosts/i386sco.h: Define it.
Thu Nov 11 15:16:28 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* bfd.c (struct _bfd): Add hppabsd_core_data.
* targets.c (target_vector): Add hppabsd_core_vec.
* hpux-core.c (hpux_core_core_file_p): Fail if an unknown core
section is encountered during core section scanning.
* hppabsd-core.c: New file.
* config/hppabsd.mh: Enable HPPA BSD core files.
* elf32-hppa.c (hppa_elf_reloc): Remove DEFUN crud. Remove code
which is either commented out or ifdef'd out. Add, update and
clean comments. Fix various indention and spacing problems. Handle
problems related to using "ble" to jump to a stub rather than "bl"
(%r31 is trashed by "ble", but not by "bl").
(NEW_INSTRUCTION): Put inside curly braces.
(CURRENT_STUB_OFFSET): Fix indention problems.
(hppa_elf_build_arg_reloc_stub): Fix indention and spacing problems.
Add, update and clean comments. Handle "ble" %r31 lossage problems.
(hppa_elf_build_long_branch_stub): Likewise.
(hppa_look_for_stubs_in_section): Likewise.
(hppa_elf_stub_check): Remove obsolete function.
* hppa_stubs.h: Add new instructions to deal with %r31 lossage
problems. Delete unused instructions.
1993-11-10 03:43:51 +08:00
Tue Nov 9 11:40:27 1993 Stan Shebs (shebs@rtl.cygnus.com)
* m68klynx.c (TARGET_IS_BIG_ENDIAN_P): Define.
Tue Nov 9 11:26:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1993-11-10 05:28:19 +08:00
* elfcode.h (elf_object_p): Rather than looking through an array
of architectures, get the ELF EM_xxx code from the backend
information. Let the generic ELF target match any EM_xxx code not
matched by another ELF target. Call elf_backend_object_p to let
the backend do more checks and set global information.
* libelf.h (struct elf_backend_data): Added elf_machine_code and
elf_backend_object_p fields.
(struct bfd_elf_arch_map): Removed.
(bfd_elf_arch_map, bfd_elf_arch_map_size): Don't declare.
* elf32-target.h, elf64-target.h: Initialize elf_machine_code
field with ELF_MACHINE_CODE. Initialize elf_backend_object_p
field with elf_backend_object_p (if it is defined).
* elf32-gen.c, elf32-hppa.c, elf32-i386.c, elf32-i860.c,
elf32-m68k.c, elf32-m88k.c, elf32-mips.c, elf32-sparc.c,
elf64-gen.c (ELF_MACHINE_CODE): Defined.
* elf32-mips.c: Include ecoffswap.h to get ECOFF swapping
routines.
(mips_elf_object_p): Set the right machine number.
(mips_elf_ecoff_debug_swap): Defined.
(elf_backend_object_p): Defined to be mips_elf_object_p.
(elf_backend_ecoff_debug_swap): Defined to be
mips_elf_ecoff_debug_swap.
* elf.c (bfd_elf_arch_map, bfd_elf_arch_map_size): Removed.
* libbfd-in.h (target_vector, default_vector): Declare.
* libbfd.h: Rebuilt.
* format.c (target_vector, default_vector): Don't declare.
* elf32-mips.c (elf_mips_howto_table): Don't complain on overflow
for R_MIPS_26. Correct overflow detection requires matching the
upper four bits of the destination against the PC. From Ted Lemon
<mellon@pepper.ncd.com>.
* bout.c (b_out_reloc_type_lookup): Return type should point to
const data.
* coff-i960.c (coff_i960_reloc_type_lookup): Likewise.
* elf32-hppa.c (elf_hppa_reloc_type_lookup): Likewise.
* mipsbsd.c (MY(reloc_howto_type_lookup)): Likewise.
* coff-i386.c (coff_i386_reloc): Made howto const.
* oasys.c (oasys_write_data): Made how const.
* libelf.h: Added some comments.
(struct elf_backend_data): Added elf_backend_ecoff_debug_swap
field. Removed unused write_relocs field.
* elf32-target.h: Adjusted elf_backend_data initialization
accordingly.
* elf64-target.h: Corrected elf_backend_data initialization to
fill in all fields and to set elf_64_p to 1.
Mon Nov 8 18:13:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elfcode.h (bfd_section_from_shdr): Remove duplicate assignment
to filepos in SHT_STRTAB case.
(assign_file_position_for_section): Set BFD section filepos as
well as ELF section sh_offset.
* reloc.c: Use const instead of CONST.
(bfd_perform_relocation): Make variable howto a const pointer.
* bfd-in2.h, libbfd.h: Rebuilt.
Mon Nov 8 12:19:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (realclean): Don't remove generated headers. Reverts
change of 2 Jul 1993.
1993-11-08 22:19:26 +08:00
Mon Nov 8 06:08:31 1993 D. V. Henkel-Wallace (gumby@cirdan.cygnus.com)
* configure.bfd: make unixware equivalent to sysv4.
* config/i386-nlm.mt: bring in elf config; make it the default.
Sun Nov 7 20:21:38 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* libbfd.c (bfd_put_8): Add parens around reference to "val"
argument.
1993-11-06 13:51:14 +08:00
Fri Nov 5 21:45:09 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* hosts/i386mach3.h (HOST_SEGMENT_SIZE),
i386mach3.c (SEGMENT_SIZE, TEXT_START_ADDR): Correct values (?).
1993-11-06 04:55:58 +08:00
Fri Nov 5 15:17:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffcode.h (coff_write_object_contents): Zero out internal_a.
1993-11-06 03:51:52 +08:00
Fri Nov 5 10:41:07 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* aoutx.h, archive.c, archures.c, bfd.c, cache.c, coffcode.h,
core.c, ctor.c, format.c, init.c, libbfd.c, opncls.c, reloc.c,
section.c, syms.c, targets.c:
Doc cleanup (spelling, punctuation, grammar, formatting).
* bfd-in2.h, libbfd.h: Rebuild.
Thu Nov 4 14:46:14 1993 John Gilmore (gnu@rtl.cygnus.com)
* bfd-in.h (bfd_get_cacheable, bfd_set_cacheable): New accessors.
* bfd.c, opncls.c: Improve comments on file descriptor cacheing.
Thu Nov 4 08:54:30 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* From Pete Hoogenboom (hoogen@cs.utah.edu)
* elf32-hppa.c (hppa_elf_get_section_contents): Fix logic error
in last change. Always rebuild symbol extension section the first
time though if output sections exist (fixes ld -r problems).
Thu Nov 04 08:08:46 1993 Jeffrey Wheat (cassidy@cygnus.com)
* Makefile.in: Add .PHONY for check and installcheck rules.
Tue Nov 2 14:42:27 1993 Bill Cox (bill@tarkas.cygnus.com)
* libbfd-in.h (artdata): Use long, not time_t for portability, at
least to HPUX. File below is a derived file.
1993-11-03 06:45:05 +08:00
Tue Nov 2 14:42:27 1993 Bill Cox (bill@tarkas.cygnus.com)
* libbfd.h (artdata): Use long, not time_t for portability, at
least to HPUX.
Tue Nov 2 09:32:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* config.bfd: Use bigmips for mips*-*-bsd*.
Mon Nov 1 14:30:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* elfcode.h (elf_slurp_reloca_table, elf_slurp_reloc_table):
Handle symbol number of zero.
* reloc.c (enum bfd_reloc_code_real): Added
BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MIPS_GOT16,
BFD_RELOC_MIPS_CALL16, BFD_RELOC_MIPS_GPREL32.
* bfd-in2.h: Rebuilt.
* coff-mips.c (mips_bfd_reloc_type_lookup): Handle
BFD_RELOC_MIPS_LITERAL.
* elf32-mips.c (mips_reloc_map): Handle new relocs.
(mips_elf_hi16_reloc, mips_elf_lo16_reloc): Rearrange _gp_disp
checks slightly.
* aout-target.h (MY_bfd_debug_info_start, MY_bfd_debug_info_end,
MY_bfd_debug_info_accumulat [sic]): Remove unused definitions.
(MY_bfd_get_relocated_section_contents, MY_bfd_relax_section,
MY_bfd_seclet_link): Define.
(MY_bfd_reloc_type_lookup): Rename from
MY_reloc_howto_type_lookup.
(MY_bfd_make_debug_symbol): Rename from MY_make_debug_symbol.
(MY(vec)): Use JUMP_TABLE rather than listing functions.
* hp300hpux.c (MY_get_symtab, MY_get_symtab_upper_bound,
MY_canonicalize_reloc, MY_write_object_contents): Don't define in
terms of MY, because that causes a recusive invocation of CAT when
expanded within JUMP_TABLE, and ANSI compilers don't expand
recursive macros.
* mipsbsd.c (MY_bfd_reloc_type_lookup): Rename from
MY_reloc_howto_type_lookup, and don't define in terms of MY.
(MY_canonicalize_reloc): Don't define in terms of MY.
(aout_mips_little_vec, aout_mips_big_vec): Use JUMP_TABLE rather
than listing functions.
Mon Nov 1 09:12:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* config.bfd: Use m68k-elf for m68*-*-sysv4*.
1993-11-23 16:06:20 +08:00
See file ChangeLog.1
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: