binutils-gdb/opcodes/ChangeLog

169 lines
4.7 KiB
Plaintext
Raw Normal View History

2019-03-25 Tamar Christina <tamar.christina@arm.com>
* aarch64-dis.c (print_insn_aarch64):
Implement override.
AArch64: Fix AArch64 disassembler mapping symbol search My previous patch for AArch64 was not enough to catch all the cases where disassembling an out-of-order section could go wrong. It had missed the case DATA sections could be incorrectly disassembled as TEXT. Out of order here refers to an object file where sections are not listed in a monotonic increasing VMA order. The ELF ABI for AArch64 [1] specifies the following for mapping symbols: 1) A text section must always have a corresponding mapping symbol at it's start. 2) Data sections do not require any mapping symbols. 3) The range of a mapping symbol extends from the address it starts on up to the next mapping symbol (exclusive) or section end (inclusive). However there is no defined order between a symbol and it's corresponding mapping symbol in the symbol table. This means that while in general we look up for a corresponding mapping symbol, we have to make at least one check of the symbol below the address being disassembled. When disassembling different PCs within the same section, the search for mapping symbol can be cached somewhat. We know that the mapping symbol corresponding to the current PC is either the previous one used, or one at the same address as the current PC. However this optimization and mapping symbol search must stop as soon as we reach the end or start of the section. Furthermore if we're only disassembling a part of a section, the search is a allowed to search further than the current chunk, but is not allowed to search past it (The mapping symbol if there, must be at the same address, so in practice we usually stop at PC+4). lastly, since only data sections don't require a mapping symbol the default mapping type should be DATA and not INSN as previously defined, however if the binary has had all its symbols stripped than this isn't very useful. To fix this we determine the default based on the section flags. This will allow the disassembler to be more useful on stripped binaries. If there is no section than we assume you to be disassembling INSN. [1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4 binutils/ChangeLog: * testsuite/binutils-all/aarch64/in-order.d: New test. * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as well. opcodes/ChangeLog: * aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search order.
2019-03-25 20:12:03 +08:00
2019-03-25 Tamar Christina <tamar.christina@arm.com>
* aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search
order.
2019-03-25 Tamar Christina <tamar.christina@arm.com>
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
2019-03-19 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24359
* i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS to
CPU_ANY_AVX2_FLAGS.
* i386-init.h: Regenerated.
x86: Optimize EVEX vector load/store instructions When there is no write mask, we can encode lower 16 128-bit/256-bit EVEX vector register load and store instructions as VEX vector register load and store instructions with -O1. gas/ PR gas/24348 * config/tc-i386.c (optimize_encoding): Encode 128-bit and 256-bit EVEX vector register load/store instructions as VEX vector register load/store instructions for -O1. * doc/c-i386.texi: Update -O1 documentation. * testsuite/gas/i386/i386.exp: Run PR gas/24348 tests. * testsuite/gas/i386/optimize-1.s: Add tests for EVEX vector load/store instructions. * testsuite/gas/i386/optimize-2.s: Likewise. * testsuite/gas/i386/optimize-3.s: Likewise. * testsuite/gas/i386/optimize-5.s: Likewise. * testsuite/gas/i386/x86-64-optimize-2.s: Likewise. * testsuite/gas/i386/x86-64-optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-4.s: Likewise. * testsuite/gas/i386/x86-64-optimize-5.s: Likewise. * testsuite/gas/i386/x86-64-optimize-6.s: Likewise. * testsuite/gas/i386/optimize-1.d: Updated. * testsuite/gas/i386/optimize-2.d: Likewise. * testsuite/gas/i386/optimize-3.d: Likewise. * testsuite/gas/i386/optimize-4.d: Likewise. * testsuite/gas/i386/optimize-5.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.d: Likewise. * testsuite/gas/i386/x86-64-optimize-3.d: Likewise. * testsuite/gas/i386/x86-64-optimize-4.d: Likewise. * testsuite/gas/i386/x86-64-optimize-5.d: Likewise. * testsuite/gas/i386/x86-64-optimize-6.d: Likewise. * testsuite/gas/i386/optimize-7.d: New file. * testsuite/gas/i386/optimize-7.s: Likewise. * testsuite/gas/i386/x86-64-optimize-8.d: Likewise. * testsuite/gas/i386/x86-64-optimize-8.s: Likewise. opcodes/ PR gas/24348 * i386-opc.tbl: Add Optimize to vmovdqa32, vmovdqa64, vmovdqu8, vmovdqu16, vmovdqu32 and vmovdqu64. * i386-tbl.h: Regenerated.
2019-03-18 08:56:10 +08:00
2019-03-18 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24348
* i386-opc.tbl: Add Optimize to vmovdqa32, vmovdqa64, vmovdqu8,
vmovdqu16, vmovdqu32 and vmovdqu64.
* i386-tbl.h: Regenerated.
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Rename selhhhr to selfhr. Remove optional operand
from vstrszb, vstrszh, and vstrszf.
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Add instruction descriptions.
2019-02-08 Jim Wilson <jimw@sifive.com>
* riscv-opc.c (riscv_opcodes) <beq>: Use Cz to compress 3 operand form.
<bne>: Likewise.
2019-02-07 Tamar Christina <tamar.christina@arm.com>
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
2019-02-07 Tamar Christina <tamar.christina@arm.com>
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
2019-02-07 Nick Clifton <nickc@redhat.com>
* po/sv.po: Updated Swedish translation.
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
2019-01-25 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (QL_LDST_AT): Update macro.
(aarch64_opcode): Change encoding for stg, stzg
st2g and st2zg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2019-01-25 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new stzgm.
AArch64: Remove ldgv and stgv instructions from Armv8.5-A Memory Tagging Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV instructions. These instructions needed special infrastructure to support [base]! style for addressing mode. That is also removed now. Committed on behalf of Sudakshina Das. *** gas/ChangeLog *** * config/tc-aarch64.c (parse_address_main): Remove support for [base]! address expression. (parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2. (warn_unpredictable_ldst): Remove support for ldstgv_indexed. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. *** include/ChangeLog *** * opcode/aarch64.h (enum aarch64_opnd): Remove AARCH64_OPND_ADDR_SIMPLE_2. (enum aarch64_insn_class): Remove ldstgv_indexed. *** opcodes/ChangeLog *** * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. * aarch64-asm.h (ins_addr_simple_2): Likeiwse. * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. * aarch64-dis.h (ext_addr_simple_2): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Remove case for ldstgv_indexed. (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.
2019-01-25 21:57:14 +08:00
2019-01-25 Sudakshina Das <sudi.das@arm.com>
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2019-01-23 Nick Clifton <nickc@redhat.com>
* po/pt_BR.po: Updated Brazilian Portuguese translation.
2019-01-21 Nick Clifton <nickc@redhat.com>
* po/de.po: Updated German translation.
* po/uk.po: Updated Ukranian translation.
2019-01-20 Chenghua Xu <paul.hua.gm@gmail.com>
* mips-dis.c (mips_arch_choices): Fix typo in
gs464, gs464e and gs264e descriptors.
2019-01-19 Nick Clifton <nickc@redhat.com>
* configure: Regenerate.
* po/opcodes.pot: Regenerate.
2018-06-24 Nick Clifton <nickc@redhat.com>
2.32 branch created.
2019-01-09 John Darrington <john@darrington.wattle.id.au>
* s12z-dis.c (print_insn_s12z): Do not dereference an operand
if it is null.
-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
* configure: Regenerate.
2019-01-07 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2019-01-03 John Darrington <john@darrington.wattle.id.au>
* s12z-opc.c: New file.
* s12z-opc.h: New file.
* s12z-dis.c: Removed all code not directly related to display
of instructions. Used the interface provided by the new files
instead.
* Makefile.am (TARGET_LIBOPCODES_CFILES) Add s12z-opc.c.
* Makefile.in: Regenerate.
* configure.ac (bfd_s12z_arch): Correct the dependencies.
* configure: Regenerate.
2019-01-01 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
2019-01-01 18:53:15 +08:00
For older changes see ChangeLog-2018
2019-01-01 18:53:15 +08:00
Copyright (C) 2019 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: