fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
/* build-id-related functions.
|
|
|
|
|
2017-01-01 14:50:51 +08:00
|
|
|
Copyright (C) 1991-2017 Free Software Foundation, Inc.
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
#include "defs.h"
|
|
|
|
#include "bfd.h"
|
|
|
|
#include "gdb_bfd.h"
|
|
|
|
#include "build-id.h"
|
|
|
|
#include "gdb_vecs.h"
|
|
|
|
#include "symfile.h"
|
|
|
|
#include "objfiles.h"
|
|
|
|
#include "filenames.h"
|
2015-04-02 20:38:29 +08:00
|
|
|
#include "gdbcore.h"
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
2014-12-05 03:32:24 +08:00
|
|
|
/* See build-id.h. */
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
2015-04-08 03:49:08 +08:00
|
|
|
const struct bfd_build_id *
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
build_id_bfd_get (bfd *abfd)
|
|
|
|
{
|
2015-04-08 03:49:08 +08:00
|
|
|
if (!bfd_check_format (abfd, bfd_object))
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
return NULL;
|
|
|
|
|
2015-04-08 03:49:08 +08:00
|
|
|
if (abfd->build_id != NULL)
|
|
|
|
return abfd->build_id;
|
|
|
|
|
|
|
|
/* No build-id */
|
|
|
|
return NULL;
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* See build-id.h. */
|
|
|
|
|
|
|
|
int
|
|
|
|
build_id_verify (bfd *abfd, size_t check_len, const bfd_byte *check)
|
|
|
|
{
|
2015-04-08 03:49:08 +08:00
|
|
|
const struct bfd_build_id *found;
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
found = build_id_bfd_get (abfd);
|
|
|
|
|
|
|
|
if (found == NULL)
|
|
|
|
warning (_("File \"%s\" has no build-id, file skipped"),
|
|
|
|
bfd_get_filename (abfd));
|
|
|
|
else if (found->size != check_len
|
|
|
|
|| memcmp (found->data, check, found->size) != 0)
|
|
|
|
warning (_("File \"%s\" has a different build-id, file skipped"),
|
|
|
|
bfd_get_filename (abfd));
|
|
|
|
else
|
|
|
|
retval = 1;
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* See build-id.h. */
|
|
|
|
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
gdb_bfd_ref_ptr
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
build_id_to_debug_bfd (size_t build_id_len, const bfd_byte *build_id)
|
|
|
|
{
|
|
|
|
char *link, *debugdir;
|
|
|
|
VEC (char_ptr) *debugdir_vec;
|
|
|
|
struct cleanup *back_to;
|
|
|
|
int ix;
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
gdb_bfd_ref_ptr abfd;
|
2015-09-26 02:08:06 +08:00
|
|
|
int alloc_len;
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
|
|
|
/* DEBUG_FILE_DIRECTORY/.build-id/ab/cdef */
|
2015-09-26 02:08:06 +08:00
|
|
|
alloc_len = (strlen (debug_file_directory)
|
|
|
|
+ (sizeof "/.build-id/" - 1) + 1
|
|
|
|
+ 2 * build_id_len + (sizeof ".debug" - 1) + 1);
|
|
|
|
link = (char *) alloca (alloc_len);
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
|
|
|
/* Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
|
|
|
|
cause "/.build-id/..." lookups. */
|
|
|
|
|
|
|
|
debugdir_vec = dirnames_to_char_ptr_vec (debug_file_directory);
|
|
|
|
back_to = make_cleanup_free_char_ptr_vec (debugdir_vec);
|
|
|
|
|
|
|
|
for (ix = 0; VEC_iterate (char_ptr, debugdir_vec, ix, debugdir); ++ix)
|
|
|
|
{
|
|
|
|
size_t debugdir_len = strlen (debugdir);
|
|
|
|
const gdb_byte *data = build_id;
|
|
|
|
size_t size = build_id_len;
|
|
|
|
char *s;
|
|
|
|
char *filename = NULL;
|
2015-06-05 01:13:50 +08:00
|
|
|
struct cleanup *inner;
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
|
|
|
memcpy (link, debugdir, debugdir_len);
|
|
|
|
s = &link[debugdir_len];
|
|
|
|
s += sprintf (s, "/.build-id/");
|
|
|
|
if (size > 0)
|
|
|
|
{
|
|
|
|
size--;
|
|
|
|
s += sprintf (s, "%02x", (unsigned) *data++);
|
|
|
|
}
|
|
|
|
if (size > 0)
|
|
|
|
*s++ = '/';
|
|
|
|
while (size-- > 0)
|
|
|
|
s += sprintf (s, "%02x", (unsigned) *data++);
|
|
|
|
strcpy (s, ".debug");
|
|
|
|
|
2017-06-12 05:16:01 +08:00
|
|
|
if (separate_debug_file_debug)
|
|
|
|
printf_unfiltered (_(" Trying %s\n"), link);
|
|
|
|
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
/* lrealpath() is expensive even for the usually non-existent files. */
|
|
|
|
if (access (link, F_OK) == 0)
|
|
|
|
filename = lrealpath (link);
|
|
|
|
|
|
|
|
if (filename == NULL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* We expect to be silent on the non-existing files. */
|
2015-06-05 01:13:50 +08:00
|
|
|
inner = make_cleanup (xfree, filename);
|
2015-04-02 20:38:29 +08:00
|
|
|
abfd = gdb_bfd_open (filename, gnutarget, -1);
|
2015-06-05 01:13:50 +08:00
|
|
|
do_cleanups (inner);
|
|
|
|
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
if (abfd == NULL)
|
|
|
|
continue;
|
|
|
|
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
if (build_id_verify (abfd.get(), build_id_len, build_id))
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
break;
|
|
|
|
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
abfd.release ();
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
do_cleanups (back_to);
|
|
|
|
return abfd;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* See build-id.h. */
|
|
|
|
|
|
|
|
char *
|
|
|
|
find_separate_debug_file_by_buildid (struct objfile *objfile)
|
|
|
|
{
|
2015-04-08 03:49:08 +08:00
|
|
|
const struct bfd_build_id *build_id;
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
|
|
|
|
build_id = build_id_bfd_get (objfile->obfd);
|
|
|
|
if (build_id != NULL)
|
|
|
|
{
|
2017-06-12 05:16:01 +08:00
|
|
|
if (separate_debug_file_debug)
|
|
|
|
printf_unfiltered (_("\nLooking for separate debug info (build-id) for "
|
|
|
|
"%s\n"), objfile_name (objfile));
|
|
|
|
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
gdb_bfd_ref_ptr abfd (build_id_to_debug_bfd (build_id->size,
|
|
|
|
build_id->data));
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
/* Prevent looping on a stripped .debug file. */
|
|
|
|
if (abfd != NULL
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
&& filename_cmp (bfd_get_filename (abfd.get ()),
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
objfile_name (objfile)) == 0)
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
warning (_("\"%s\": separate debug info file has no debug info"),
|
|
|
|
bfd_get_filename (abfd.get ()));
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
else if (abfd != NULL)
|
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
2016-11-22 02:12:23 +08:00
|
|
|
return xstrdup (bfd_get_filename (abfd.get ()));
|
fix PR symtab/15597
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-09 03:56:15 +08:00
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|