mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-11-27 03:51:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
4e64845ca5
binutils-gdb/gdb/symm-nat.c

309 lines
9.2 KiB
C
Raw Normal View History

* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
/* Sequent Symmetry host interface, for GDB when running under Unix.
Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* FIXME, some 387-specific items of use taken from i387-tdep.c -- ought to be
merged back in. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include <signal.h>
#include <sys/param.h>
#include <sys/user.h>
#include <sys/dir.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include "gdbcore.h"
#include <fcntl.h>
#include <sgtty.h>
#define TERMINAL struct sgttyb
#include "gdbcore.h"
void
store_inferior_registers(regno)
int regno;
{
struct pt_regset regs;
int reg_tmp, i;
extern char registers[];
regs.pr_eax = *(int *)&registers[REGISTER_BYTE(0)];
regs.pr_ebx = *(int *)&registers[REGISTER_BYTE(5)];
regs.pr_ecx = *(int *)&registers[REGISTER_BYTE(2)];
regs.pr_edx = *(int *)&registers[REGISTER_BYTE(1)];
regs.pr_esi = *(int *)&registers[REGISTER_BYTE(6)];
regs.pr_edi = *(int *)&registers[REGISTER_BYTE(7)];
regs.pr_esp = *(int *)&registers[REGISTER_BYTE(14)];
regs.pr_ebp = *(int *)&registers[REGISTER_BYTE(15)];
regs.pr_eip = *(int *)&registers[REGISTER_BYTE(16)];
regs.pr_flags = *(int *)&registers[REGISTER_BYTE(17)];
for (i = 0; i < 31; i++)
{
regs.pr_fpa.fpa_regs[i] =
*(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)];
}
PTRACE_WRITE_REGS (inferior_pid, (PTRACE_ARG3_TYPE) &regs);
}
void
fetch_inferior_registers (regno)
int regno;
{
int i;
struct pt_regset regs;
extern char registers[];
registers_fetched ();
PTRACE_READ_REGS (inferior_pid, (PTRACE_ARG3_TYPE) &regs);
*(int *)&registers[REGISTER_BYTE(EAX_REGNUM)] = regs.pr_eax;
*(int *)&registers[REGISTER_BYTE(EBX_REGNUM)] = regs.pr_ebx;
*(int *)&registers[REGISTER_BYTE(ECX_REGNUM)] = regs.pr_ecx;
*(int *)&registers[REGISTER_BYTE(EDX_REGNUM)] = regs.pr_edx;
*(int *)&registers[REGISTER_BYTE(ESI_REGNUM)] = regs.pr_esi;
*(int *)&registers[REGISTER_BYTE(EDI_REGNUM)] = regs.pr_edi;
*(int *)&registers[REGISTER_BYTE(EBP_REGNUM)] = regs.pr_ebp;
*(int *)&registers[REGISTER_BYTE(ESP_REGNUM)] = regs.pr_esp;
*(int *)&registers[REGISTER_BYTE(EIP_REGNUM)] = regs.pr_eip;
*(int *)&registers[REGISTER_BYTE(EFLAGS_REGNUM)] = regs.pr_flags;
for (i = 0; i < FPA_NREGS; i++)
{
*(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)] =
regs.pr_fpa.fpa_regs[i];
}
memcpy (&registers[REGISTER_BYTE(ST0_REGNUM)], regs.pr_fpu.fpu_stack[0], 10);
memcpy (&registers[REGISTER_BYTE(ST1_REGNUM)], regs.pr_fpu.fpu_stack[1], 10);
memcpy (&registers[REGISTER_BYTE(ST2_REGNUM)], regs.pr_fpu.fpu_stack[2], 10);
memcpy (&registers[REGISTER_BYTE(ST3_REGNUM)], regs.pr_fpu.fpu_stack[3], 10);
memcpy (&registers[REGISTER_BYTE(ST4_REGNUM)], regs.pr_fpu.fpu_stack[4], 10);
memcpy (&registers[REGISTER_BYTE(ST5_REGNUM)], regs.pr_fpu.fpu_stack[5], 10);
memcpy (&registers[REGISTER_BYTE(ST6_REGNUM)], regs.pr_fpu.fpu_stack[6], 10);
memcpy (&registers[REGISTER_BYTE(ST7_REGNUM)], regs.pr_fpu.fpu_stack[7], 10);
}
/* FIXME: This should be merged with i387-tdep.c as well. */
static
print_fpu_status(ep)
struct pt_regset ep;
{
int i;
int bothstatus;
int top;
int fpreg;
unsigned char *p;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("80387:");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
if (ep.pr_fpu.fpu_ip == 0) {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" not in use.\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
return;
} else {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
if (ep.pr_fpu.fpu_status != 0) {
print_387_status_word (ep.pr_fpu.fpu_status);
}
print_387_control_word (ep.pr_fpu.fpu_control);
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered ("last exception: ");
printf_unfiltered ("opcode 0x%x; ", ep.pr_fpu.fpu_rsvd4);
printf_unfiltered ("pc 0x%x:0x%x; ", ep.pr_fpu.fpu_cs, ep.pr_fpu.fpu_ip);
printf_unfiltered ("operand 0x%x:0x%x\n", ep.pr_fpu.fpu_data_offset, ep.pr_fpu.fpu_op_sel);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
top = (ep.pr_fpu.fpu_status >> 11) & 7;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered ("regno tag msb lsb value\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
for (fpreg = 7; fpreg >= 0; fpreg--)
{
double val;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : " ", fpreg);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
switch ((ep.pr_fpu.fpu_tag >> (fpreg * 2)) & 3)
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
case 0: printf_unfiltered ("valid "); break;
case 1: printf_unfiltered ("zero "); break;
case 2: printf_unfiltered ("trap "); break;
case 3: printf_unfiltered ("empty "); break;
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
for (i = 9; i >= 0; i--)
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered ("%02x", ep.pr_fpu.fpu_stack[fpreg][i]);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
i387_to_double (ep.pr_fpu.fpu_stack[fpreg], (char *)&val);
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered (" %g\n", val);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
if (ep.pr_fpu.fpu_rsvd1)
warning ("rsvd1 is 0x%x\n", ep.pr_fpu.fpu_rsvd1);
if (ep.pr_fpu.fpu_rsvd2)
warning ("rsvd2 is 0x%x\n", ep.pr_fpu.fpu_rsvd2);
if (ep.pr_fpu.fpu_rsvd3)
warning ("rsvd3 is 0x%x\n", ep.pr_fpu.fpu_rsvd3);
if (ep.pr_fpu.fpu_rsvd5)
warning ("rsvd5 is 0x%x\n", ep.pr_fpu.fpu_rsvd5);
}
print_1167_control_word(pcr)
unsigned int pcr;
{
int pcr_tmp;
pcr_tmp = pcr & FPA_PCR_MODE;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\tMODE= %#x; RND= %#x ", pcr_tmp, pcr_tmp & 12);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
switch (pcr_tmp & 12) {
case 0:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("RN (Nearest Value)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case 1:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("RZ (Zero)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case 2:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("RP (Positive Infinity)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case 3:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("RM (Negative Infinity)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
}
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("; IRND= %d ", pcr_tmp & 2);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
if (0 == pcr_tmp & 2) {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("(same as RND)\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
} else {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("(toward zero)\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
pcr_tmp = pcr & FPA_PCR_EM;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\tEM= %#x", pcr_tmp);
if (pcr_tmp & FPA_PCR_EM_DM) printf_unfiltered(" DM");
if (pcr_tmp & FPA_PCR_EM_UOM) printf_unfiltered(" UOM");
if (pcr_tmp & FPA_PCR_EM_PM) printf_unfiltered(" PM");
if (pcr_tmp & FPA_PCR_EM_UM) printf_unfiltered(" UM");
if (pcr_tmp & FPA_PCR_EM_OM) printf_unfiltered(" OM");
if (pcr_tmp & FPA_PCR_EM_ZM) printf_unfiltered(" ZM");
if (pcr_tmp & FPA_PCR_EM_IM) printf_unfiltered(" IM");
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
pcr_tmp = FPA_PCR_CC;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\tCC= %#x", pcr_tmp);
if (pcr_tmp & FPA_PCR_20MHZ) printf_unfiltered(" 20MHZ");
if (pcr_tmp & FPA_PCR_CC_Z) printf_unfiltered(" Z");
if (pcr_tmp & FPA_PCR_CC_C2) printf_unfiltered(" C2");
if (pcr_tmp & FPA_PCR_CC_C1) printf_unfiltered(" C1");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
switch (pcr_tmp) {
case FPA_PCR_CC_Z:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" (Equal)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case FPA_PCR_CC_C1:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" (Less than)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case 0:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" (Greater than)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
case FPA_PCR_CC_Z | FPA_PCR_CC_C1 | FPA_PCR_CC_C2:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" (Unordered)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
default:
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" (Undefined)");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
break;
}
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
pcr_tmp = pcr & FPA_PCR_AE;
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\tAE= %#x", pcr_tmp);
if (pcr_tmp & FPA_PCR_AE_DE) printf_unfiltered(" DE");
if (pcr_tmp & FPA_PCR_AE_UOE) printf_unfiltered(" UOE");
if (pcr_tmp & FPA_PCR_AE_PE) printf_unfiltered(" PE");
if (pcr_tmp & FPA_PCR_AE_UE) printf_unfiltered(" UE");
if (pcr_tmp & FPA_PCR_AE_OE) printf_unfiltered(" OE");
if (pcr_tmp & FPA_PCR_AE_ZE) printf_unfiltered(" ZE");
if (pcr_tmp & FPA_PCR_AE_EE) printf_unfiltered(" EE");
if (pcr_tmp & FPA_PCR_AE_IE) printf_unfiltered(" IE");
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
print_1167_regs(regs)
long regs[FPA_NREGS];
{
int i;
union {
double d;
long l[2];
} xd;
union {
float f;
long l;
} xf;
for (i = 0; i < FPA_NREGS; i++) {
xf.l = regs[i];
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("%%fp%d: raw= %#x, single= %f", i+1, regs[i], xf.f);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
if (!(i & 1)) {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
} else {
xd.l[1] = regs[i];
xd.l[0] = regs[i+1];
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(", double= %f\n", xd.d);
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
}
}
print_fpa_status(ep)
struct pt_regset ep;
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("WTL 1167:");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
if (ep.pr_fpa.fpa_pcr !=0) {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered("\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
print_1167_control_word(ep.pr_fpa.fpa_pcr);
print_1167_regs(ep.pr_fpa.fpa_regs);
} else {
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-02 06:25:23 +08:00
printf_unfiltered(" not in use.\n");
* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL but not the others. * symm-tdep.c: Remove exec_file_command. [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. A few miscellaneous cleanups. * symm-nat.c: Renamed from symm-xdep.c. * All symmetry dependent files: Many changes.
1993-07-19 13:00:13 +08:00
}
}
i386_float_info ()
{
char ubuf[UPAGES*NBPG];
struct pt_regset regset;
if (have_inferior_p())
{
PTRACE_READ_REGS (inferior_pid, (PTRACE_ARG3_TYPE) &regset);
}
else
{
int corechan = bfd_cache_lookup (core_bfd);
if (lseek (corechan, 0, 0) < 0)
{
perror ("seek on core file");
}
if (myread (corechan, ubuf, UPAGES*NBPG) < 0)
{
perror ("read on core file");
}
/* only interested in the floating point registers */
regset.pr_fpu = ((struct user *) ubuf)->u_fpusave;
regset.pr_fpa = ((struct user *) ubuf)->u_fpasave;
}
print_fpu_status(regset);
print_fpa_status(regset);
}
Reference in New Issue Copy Permalink