2
0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-21 04:42:53 +08:00
binutils-gdb/gdb/record.h

95 lines
3.4 KiB
C
Raw Normal View History

/* Process record and replay target for GDB, the GNU debugger.
Copyright (C) 2008-2016 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef _RECORD_H_
#define _RECORD_H_
record-full/record-btrace: software/hardware breakpoint trap This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-05 04:41:15 +08:00
#include "target/waitstatus.h" /* For enum target_stop_reason. */
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 21:31:29 +08:00
#include "common/enum-flags.h"
record-full/record-btrace: software/hardware breakpoint trap This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-05 04:41:15 +08:00
Split record.h into record.h and record-full.h. Split record.c into record.c and record-full.c. The split leaves the command part in record.c and moves the target part into record-full.c. gdb/ * record.h: Split into this and ... * record-full.h: ... this. * record.c: Split into this and ... * record-full.c: ... this. * target.h (target_ops): Add new fields to_info_record, to_save_record, to_delete_record, to_record_is_replaying, to_goto_record_begin, to_goto_record_end, to_goto_record. (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * target.c (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * record.h: Declare struct cmd_list_element. (record_cmdlist): New declaration. (set_record_cmdlist): New declaration. (show_record_cmdlist): New declaration. (info_record_cmdlist): New declaration. (cmd_record_goto): New declaration. * record.c: Remove unnecessary includes. Include inferior.h. (cmd_record_goto): Remove declaration. (record_cmdlist): Now extern. Initialize. (set_record_cmdlist): Now extern. Initialize. (show_record_cmdlist): Now extern. Initialize. (info_record_cmdlist): Now extern. Initialize. (find_record_target): New. (require_record_target): New. (cmd_record_start): Update. (cmd_record_delete): Remove target-specific code. Call target_delete_record. (cmd_record_stop): Unpush any record target. (set_record_insn_max_num): Move to record-full.c (set_record_command): Add comment. (show_record_command): Add comment. (info_record_command): Update comment. Remove target-specific code. Call the record target's to_info_record. (cmd_record_start): New. (cmd_record_goto): Now extern. Remove target-specific code. Call target_goto_begin, target_goto_end, or target_goto. (_initialize_record): Move record target ops initialization to record-full.c. Change "record" command help text. Move "record restore", "record set", and "record show" commands to record-full.c. * Makefile.in (SFILES): Add record-full.c. (HFILES_NO_SRCDIR): Add record-full.h. (COMMON_OBS): Add record-full.o. * amd64-linux-tdep.c: Include record-full.h instead of record.h. * arm-tdep.c: Include record-full.h. * i386-linux-tdep.c: Include record-full.h instead of record.h. * i386-tdep.c: Include record-full.h. * infrun.c: Include record-full.h. * linux-record.c: Include record-full.h. * moxie-tdep.c: Include record-full.h. * record-full.c: Include record-full.h. Change module comment. (set_record_full_cmdlist): New. (show_record_full_cmdlist): New. (record_full_cmdlist): New. (record_goto_insn): New declaration. (record_save): New declaration. (record_check_insn_num): Change query string. (record_info): New. (record_delete): New. (record_is_replaying): New. (record_goto_entry): New. (record_goto_begin): New. (record_goto_end): New. (record_goto): New. (init_record_ops): Update. (init_record_core_ops): Update. (cmd_record_save): Rename to record_save. Remove target and arg checks. (cmd_record_start): New. (set_record_insn_max_num): Moved from record.c (set_record_full_command): New. (show_record_full_command): New. (_initialize_record_full): New.
2013-03-11 16:42:55 +08:00
struct cmd_list_element;
gdb/ * dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 17:36:40 +08:00
extern unsigned int record_debug;
Split record.h into record.h and record-full.h. Split record.c into record.c and record-full.c. The split leaves the command part in record.c and moves the target part into record-full.c. gdb/ * record.h: Split into this and ... * record-full.h: ... this. * record.c: Split into this and ... * record-full.c: ... this. * target.h (target_ops): Add new fields to_info_record, to_save_record, to_delete_record, to_record_is_replaying, to_goto_record_begin, to_goto_record_end, to_goto_record. (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * target.c (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * record.h: Declare struct cmd_list_element. (record_cmdlist): New declaration. (set_record_cmdlist): New declaration. (show_record_cmdlist): New declaration. (info_record_cmdlist): New declaration. (cmd_record_goto): New declaration. * record.c: Remove unnecessary includes. Include inferior.h. (cmd_record_goto): Remove declaration. (record_cmdlist): Now extern. Initialize. (set_record_cmdlist): Now extern. Initialize. (show_record_cmdlist): Now extern. Initialize. (info_record_cmdlist): Now extern. Initialize. (find_record_target): New. (require_record_target): New. (cmd_record_start): Update. (cmd_record_delete): Remove target-specific code. Call target_delete_record. (cmd_record_stop): Unpush any record target. (set_record_insn_max_num): Move to record-full.c (set_record_command): Add comment. (show_record_command): Add comment. (info_record_command): Update comment. Remove target-specific code. Call the record target's to_info_record. (cmd_record_start): New. (cmd_record_goto): Now extern. Remove target-specific code. Call target_goto_begin, target_goto_end, or target_goto. (_initialize_record): Move record target ops initialization to record-full.c. Change "record" command help text. Move "record restore", "record set", and "record show" commands to record-full.c. * Makefile.in (SFILES): Add record-full.c. (HFILES_NO_SRCDIR): Add record-full.h. (COMMON_OBS): Add record-full.o. * amd64-linux-tdep.c: Include record-full.h instead of record.h. * arm-tdep.c: Include record-full.h. * i386-linux-tdep.c: Include record-full.h instead of record.h. * i386-tdep.c: Include record-full.h. * infrun.c: Include record-full.h. * linux-record.c: Include record-full.h. * moxie-tdep.c: Include record-full.h. * record-full.c: Include record-full.h. Change module comment. (set_record_full_cmdlist): New. (show_record_full_cmdlist): New. (record_full_cmdlist): New. (record_goto_insn): New declaration. (record_save): New declaration. (record_check_insn_num): Change query string. (record_info): New. (record_delete): New. (record_is_replaying): New. (record_goto_entry): New. (record_goto_begin): New. (record_goto_end): New. (record_goto): New. (init_record_ops): Update. (init_record_core_ops): Update. (cmd_record_save): Rename to record_save. Remove target and arg checks. (cmd_record_start): New. (set_record_insn_max_num): Moved from record.c (set_record_full_command): New. (show_record_full_command): New. (_initialize_record_full): New.
2013-03-11 16:42:55 +08:00
/* Allow record targets to add their own sub-commands. */
extern struct cmd_list_element *record_cmdlist;
extern struct cmd_list_element *set_record_cmdlist;
extern struct cmd_list_element *show_record_cmdlist;
extern struct cmd_list_element *info_record_cmdlist;
/* Unwinders for some record targets. */
extern const struct frame_unwind record_btrace_frame_unwind;
extern const struct frame_unwind record_btrace_tailcall_frame_unwind;
/* A list of flags specifying what record target methods should print. */
enum record_print_flag
{
/* Print the source file and line (if applicable). */
RECORD_PRINT_SRC_LINE = (1 << 0),
/* Print the instruction number range (if applicable). */
RECORD_PRINT_INSN_RANGE = (1 << 1),
record-btrace: optionally indent function call history Add a new modifier /c to the "record function-call-history" command to indent the function name based on its depth in the call stack. Also reorder the optional fields to have the indentation at the very beginning. Prefix the insn range (/i modifier) with "inst ". Prefix the source line (/l modifier) with "at ". Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to the "record instruction-history" and "list" commands. Adjust the respective tests and add new tests for the /c modifier. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * record.h (enum record_print_flag) <record_print_indent_calls>: New. * record.c (get_call_history_modifiers): Recognize /c modifier. (_initialize_record): Document /c modifier. * record-btrace.c (btrace_call_history): Add btinfo parameter. Reorder fields. Optionally indent the function name. Update all users. * NEWS: Announce changes. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected field order for "record function-call-history". Add new tests for "record function-call-history /c". * gdb.btrace/exception.cc: New. * gdb.btrace/exception.exp: New. * gdb.btrace/tailcall.exp: New. * gdb.btrace/x86-tailcall.S: New. * gdb.btrace/x86-tailcall.c: New. * gdb.btrace/unknown_functions.c: New. * gdb.btrace/unknown_functions.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo (Process Record and Replay): Document new /c modifier accepted by "record function-call-history". Add /i modifier to "record function-call-history" example.
2013-04-18 16:58:05 +08:00
/* Indent based on call stack depth (if applicable). */
RECORD_PRINT_INDENT_CALLS = (1 << 2)
};
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 21:31:29 +08:00
DEF_ENUM_FLAGS_TYPE (enum record_print_flag, record_print_flags);
record-full/record-btrace: software/hardware breakpoint trap This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-05 04:41:15 +08:00
/* Determined whether the target is stopped at a software or hardware
breakpoint, based on PC and the breakpoint tables. The breakpoint
type is translated to the appropriate target_stop_reason and
written to REASON. Returns true if stopped at a breakpoint, false
otherwise. */
extern int
record_check_stopped_by_breakpoint (struct address_space *aspace,
CORE_ADDR pc,
enum target_stop_reason *reason);
/* Wrapper for target_read_memory that prints a debug message if
reading memory fails. */
extern int record_read_memory (struct gdbarch *gdbarch,
CORE_ADDR memaddr, gdb_byte *myaddr,
ssize_t len);
/* A wrapper for target_goto_record that parses ARG as a number. */
extern void record_goto (const char *arg);
Split record.h into record.h and record-full.h. Split record.c into record.c and record-full.c. The split leaves the command part in record.c and moves the target part into record-full.c. gdb/ * record.h: Split into this and ... * record-full.h: ... this. * record.c: Split into this and ... * record-full.c: ... this. * target.h (target_ops): Add new fields to_info_record, to_save_record, to_delete_record, to_record_is_replaying, to_goto_record_begin, to_goto_record_end, to_goto_record. (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * target.c (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * record.h: Declare struct cmd_list_element. (record_cmdlist): New declaration. (set_record_cmdlist): New declaration. (show_record_cmdlist): New declaration. (info_record_cmdlist): New declaration. (cmd_record_goto): New declaration. * record.c: Remove unnecessary includes. Include inferior.h. (cmd_record_goto): Remove declaration. (record_cmdlist): Now extern. Initialize. (set_record_cmdlist): Now extern. Initialize. (show_record_cmdlist): Now extern. Initialize. (info_record_cmdlist): Now extern. Initialize. (find_record_target): New. (require_record_target): New. (cmd_record_start): Update. (cmd_record_delete): Remove target-specific code. Call target_delete_record. (cmd_record_stop): Unpush any record target. (set_record_insn_max_num): Move to record-full.c (set_record_command): Add comment. (show_record_command): Add comment. (info_record_command): Update comment. Remove target-specific code. Call the record target's to_info_record. (cmd_record_start): New. (cmd_record_goto): Now extern. Remove target-specific code. Call target_goto_begin, target_goto_end, or target_goto. (_initialize_record): Move record target ops initialization to record-full.c. Change "record" command help text. Move "record restore", "record set", and "record show" commands to record-full.c. * Makefile.in (SFILES): Add record-full.c. (HFILES_NO_SRCDIR): Add record-full.h. (COMMON_OBS): Add record-full.o. * amd64-linux-tdep.c: Include record-full.h instead of record.h. * arm-tdep.c: Include record-full.h. * i386-linux-tdep.c: Include record-full.h instead of record.h. * i386-tdep.c: Include record-full.h. * infrun.c: Include record-full.h. * linux-record.c: Include record-full.h. * moxie-tdep.c: Include record-full.h. * record-full.c: Include record-full.h. Change module comment. (set_record_full_cmdlist): New. (show_record_full_cmdlist): New. (record_full_cmdlist): New. (record_goto_insn): New declaration. (record_save): New declaration. (record_check_insn_num): Change query string. (record_info): New. (record_delete): New. (record_is_replaying): New. (record_goto_entry): New. (record_goto_begin): New. (record_goto_end): New. (record_goto): New. (init_record_ops): Update. (init_record_core_ops): Update. (cmd_record_save): Rename to record_save. Remove target and arg checks. (cmd_record_start): New. (set_record_insn_max_num): Moved from record.c (set_record_full_command): New. (show_record_full_command): New. (_initialize_record_full): New.
2013-03-11 16:42:55 +08:00
/* The default "to_disconnect" target method for record targets. */
extern void record_disconnect (struct target_ops *, const char *, int);
/* The default "to_detach" target method for record targets. */
constify to_detach This patch constifies the target_ops method to_detach. This is a small cleanup, but also, I think, a bug-prevention fix, since gdb already acts as if the "args" argument here was const. In particular, top.c:quit_force calls kill_or_detach via iterate_over_inferiors. kill_or_detach calls target_detach, passing the same argument each time. So, if one of these methods was not const-correct, then kill_or_detach would change its behavior in a strange way. I could not build every target I modified in this patch. I've inspected them all by hand, though. Many targets do not use the "args" parameter; a couple pass it to atoi; and a few pass it on to the to_detach method of the target beneath. The only code that required a real change was in linux-nat.c, and that only needed the introduction of a temporary variable for const-correctness. 2013-11-08 Tom Tromey <tromey@redhat.com> * aix-thread.c (aix_thread_detach): Update. * corelow.c (core_detach): Update. * darwin-nat.c (darwin_detach): Update. * dec-thread.c (dec_thread_detach): Update. * gnu-nat.c (gnu_detach): Update. * go32-nat.c (go32_detach): Update. * inf-ptrace.c (inf_ptrace_detach): Update. * inf-ttrace.c (inf_ttrace_detach): Update. * linux-fork.c (linux_fork_detach): Update. * linux-fork.h (linux_fork_detach): Update. * linux-nat.c (linux_nat_detach): Update. Introduce "tem" local for const-correctness. * linux-thread-db.c (thread_db_detach): Update. * monitor.c (monitor_detach): Update. * nto-procfs.c (procfs_detach): Update. * procfs.c (procfs_detach): Update. * record.c (record_detach): Update. * record.h (record_detach): Update. * remote-m32r-sdi.c (m32r_detach): Update. * remote-mips.c (mips_detach): Update. * remote-sim.c (gdbsim_detach): Update. * remote.c (remote_detach_1, remote_detach) (extended_remote_detach): Update. * sol-thread.c (sol_thread_detach): Update. * target.c (target_detach): Make "args" const. (init_dummy_target): Update. * target.h (struct target_ops) <to_detach>: Make argument const. (target_detach): Likewise. * windows-nat.c (windows_detach): Update.
2013-03-19 23:23:17 +08:00
extern void record_detach (struct target_ops *, const char *, int);
/* The default "to_mourn_inferior" target method for record targets. */
extern void record_mourn_inferior (struct target_ops *);
/* The default "to_kill" target method for record targets. */
extern void record_kill (struct target_ops *);
Fix "is a record target open" checks. RECORD_IS_USED and record_full_open look at current_target.to_stratum to determine whether a record target is in use. This is wrong because arch_stratum is greater than record_stratum, so if an arch_stratum target is pushed, RECORD_IS_USED and record_full_open will miss it. To fix this, we can use the existing find_record_target instead, which looks up for a record stratum target across the target stack. Since that means exporting find_record_target in record.h, RECORD_IS_USED ends up redundant, so the patch eliminates it. That exercise then reveals other issues: - adjust_pc_after_break is gating record_full_... calls based on RECORD_IS_USED. But, record_full_ calls shouldn't be made when recording with the record-btrace target. So this adds a new record_full_is_used predicate to be used in that spot. - record_full_open says "Process record target already running", even if the recording target is record-btrace ("process record" is the original complete name of the record-full target). record_btrace_open only says "The process is already being recorded." and does not suggest "record stop", like record-full does. The patch factors out and merges that error to a new record_preopen function that all record targets call in their open routine. Tested on x86_64 Fedora 17. gdb/ 2014-01-14 Pedro Alves <palves@redhat.com> Tom Tromey <tromey@redhat.com> * infrun.c (use_displaced_stepping): Use find_record_target instead of RECORD_IS_USED. (adjust_pc_after_break): Use record_full_is_used instead of RECORD_IS_USED. * record-btrace.c (record_btrace_open): Call record_preopen instead of checking RECORD_IS_USED. * record-full.c (record_full_shortname) (record_full_core_shortname): New globals. (record_full_is_used): New function. (find_full_open): Call record_preopen instead of checking RECORD_IS_USED. (init_record_full_ops): Set the target's shortname to record_full_shortname. (init_record_full_core_ops): Set the target's shortname to record_full_core_shortname. * record-full.h (record_full_is_used): Declare. * record.c (find_record_target): Make extern. (record_preopen): New function. * record.h (RECORD_IS_USED): Delete macro. (find_record_target, record_preopen): Declare functions.
2014-01-15 00:12:19 +08:00
/* Find the record_stratum target in the current target stack.
Returns NULL if none is found. */
extern struct target_ops *find_record_target (void);
/* This is to be called by record_stratum targets' open routine before
it does anything. */
extern void record_preopen (void);
#endif /* _RECORD_H_ */