binutils-gdb/gdbserver/linux-s390-ipa.cc

464 lines
15 KiB
C++
Raw Normal View History

gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
/* GNU/Linux S/390 specific low level interface, for the in-process
agent library for GDB.
Copyright (C) 2016-2021 Free Software Foundation, Inc.
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
IPA: Add alloc_jump_pad_buffer target hook. Targets may have various requirements on the required location of the jump pad area. Currently IPA allocates it at the lowest possible address, so that it is reachable by branches from the executable. However, this fails on powerpc, which has executable link address (0x10000000) much larger than branch reach (+/- 32MiB). This makes jump pad buffer allocation a target hook instead. The current implementations are as follows: - i386 and s390: Branches can reach anywhere, so just mmap it. This avoids the linear search dance. - x86_64: Branches have +/-2GiB of reach, and executable is loaded low, so just call mmap with MAP_32BIT. Likewise avoids the linear search. - aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB. Do a linear search from 4MiB-size downwards to page_size. - s390x: Branches have +-4GiB of reach, executable loaded at 2GiB. Do like on aarch64. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * linux-amd64-ipa.c: Add <sys/mman.h> include. (alloc_jump_pad_buffer): New function. * linux-i386-ipa.c (alloc_jump_pad_buffer): New function. * linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function. (initialize_tracepoint): Delegate to alloc_jump_pad_buffer. * tracepoint.h (alloc_jump_pad_buffer): New prototype. (getauxval) [!HAVE_GETAUXVAL]: New prototype.
2016-03-13 07:30:11 +08:00
#include <sys/mman.h>
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#include "tracepoint.h"
#include "linux-s390-tdesc.h"
#include <elf.h>
IPA: Add alloc_jump_pad_buffer target hook. Targets may have various requirements on the required location of the jump pad area. Currently IPA allocates it at the lowest possible address, so that it is reachable by branches from the executable. However, this fails on powerpc, which has executable link address (0x10000000) much larger than branch reach (+/- 32MiB). This makes jump pad buffer allocation a target hook instead. The current implementations are as follows: - i386 and s390: Branches can reach anywhere, so just mmap it. This avoids the linear search dance. - x86_64: Branches have +/-2GiB of reach, and executable is loaded low, so just call mmap with MAP_32BIT. Likewise avoids the linear search. - aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB. Do a linear search from 4MiB-size downwards to page_size. - s390x: Branches have +-4GiB of reach, executable loaded at 2GiB. Do like on aarch64. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * linux-amd64-ipa.c: Add <sys/mman.h> include. (alloc_jump_pad_buffer): New function. * linux-i386-ipa.c (alloc_jump_pad_buffer): New function. * linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function. (initialize_tracepoint): Delegate to alloc_jump_pad_buffer. * tracepoint.h (alloc_jump_pad_buffer): New prototype. (getauxval) [!HAVE_GETAUXVAL]: New prototype.
2016-03-13 07:30:11 +08:00
#ifdef HAVE_GETAUXVAL
#include <sys/auxv.h>
#endif
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#define FT_FPR(x) (0x000 + (x) * 0x10)
#define FT_VR(x) (0x000 + (x) * 0x10)
#define FT_VR_L(x) (0x008 + (x) * 0x10)
#define FT_GPR(x) (0x200 + (x) * 8)
#define FT_GPR_U(x) (0x200 + (x) * 8)
#define FT_GPR_L(x) (0x204 + (x) * 8)
#define FT_GPR(x) (0x200 + (x) * 8)
#define FT_ACR(x) (0x280 + (x) * 4)
#define FT_PSWM 0x2c0
#define FT_PSWM_U 0x2c0
#define FT_PSWA 0x2c8
#define FT_PSWA_L 0x2cc
#define FT_FPC 0x2d0
/* Mappings between registers collected by the jump pad and GDB's register
array layout used by regcache.
See linux-s390-low.c (s390_install_fast_tracepoint_jump_pad) for more
details. */
#ifndef __s390x__
/* Used for s390-linux32, s390-linux32v1, s390-linux32v2. */
static const int s390_linux32_ft_collect_regmap[] = {
/* 32-bit PSWA and PSWM. */
FT_PSWM_U, FT_PSWA_L,
/* 32-bit GPRs (mapped to lower halves of 64-bit slots). */
FT_GPR_L (0), FT_GPR_L (1), FT_GPR_L (2), FT_GPR_L (3),
FT_GPR_L (4), FT_GPR_L (5), FT_GPR_L (6), FT_GPR_L (7),
FT_GPR_L (8), FT_GPR_L (9), FT_GPR_L (10), FT_GPR_L (11),
FT_GPR_L (12), FT_GPR_L (13), FT_GPR_L (14), FT_GPR_L (15),
/* ACRs */
FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3),
FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7),
FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11),
FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15),
/* FPRs (mapped to upper halves of 128-bit VR slots). */
FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3),
FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7),
FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11),
FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15),
/* orig_r2, last_break, system_call */
-1, -1, -1,
};
/* Used for s390-linux64, s390-linux64v1, s390-linux64v2, s390-vx-linux64. */
static const int s390_linux64_ft_collect_regmap[] = {
/* 32-bit PSWA and PSWM. */
FT_PSWM_U, FT_PSWA_L,
/* 32-bit halves of 64-bit GPRs. */
FT_GPR_U (0), FT_GPR_L (0),
FT_GPR_U (1), FT_GPR_L (1),
FT_GPR_U (2), FT_GPR_L (2),
FT_GPR_U (3), FT_GPR_L (3),
FT_GPR_U (4), FT_GPR_L (4),
FT_GPR_U (5), FT_GPR_L (5),
FT_GPR_U (6), FT_GPR_L (6),
FT_GPR_U (7), FT_GPR_L (7),
FT_GPR_U (8), FT_GPR_L (8),
FT_GPR_U (9), FT_GPR_L (9),
FT_GPR_U (10), FT_GPR_L (10),
FT_GPR_U (11), FT_GPR_L (11),
FT_GPR_U (12), FT_GPR_L (12),
FT_GPR_U (13), FT_GPR_L (13),
FT_GPR_U (14), FT_GPR_L (14),
FT_GPR_U (15), FT_GPR_L (15),
/* ACRs */
FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3),
FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7),
FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11),
FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15),
/* FPRs (mapped to upper halves of 128-bit VR slots). */
FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3),
FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7),
FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11),
FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15),
/* orig_r2, last_break, system_call */
-1, -1, -1,
/* Lower halves of 128-bit VRs. */
FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3),
FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7),
FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11),
FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15),
/* And the next 16 VRs. */
FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19),
FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23),
FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27),
FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31),
};
/* Used for s390-te-linux64, s390-tevx-linux64, and s390-gs-linux64. */
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
static const int s390_te_linux64_ft_collect_regmap[] = {
/* 32-bit PSWA and PSWM. */
FT_PSWM_U, FT_PSWA_L,
/* 32-bit halves of 64-bit GPRs. */
FT_GPR_U (0), FT_GPR_L (0),
FT_GPR_U (1), FT_GPR_L (1),
FT_GPR_U (2), FT_GPR_L (2),
FT_GPR_U (3), FT_GPR_L (3),
FT_GPR_U (4), FT_GPR_L (4),
FT_GPR_U (5), FT_GPR_L (5),
FT_GPR_U (6), FT_GPR_L (6),
FT_GPR_U (7), FT_GPR_L (7),
FT_GPR_U (8), FT_GPR_L (8),
FT_GPR_U (9), FT_GPR_L (9),
FT_GPR_U (10), FT_GPR_L (10),
FT_GPR_U (11), FT_GPR_L (11),
FT_GPR_U (12), FT_GPR_L (12),
FT_GPR_U (13), FT_GPR_L (13),
FT_GPR_U (14), FT_GPR_L (14),
FT_GPR_U (15), FT_GPR_L (15),
/* ACRs */
FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3),
FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7),
FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11),
FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15),
/* FPRs (mapped to upper halves of 128-bit VR slots). */
FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3),
FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7),
FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11),
FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15),
/* orig_r2, last_break, system_call */
-1, -1, -1,
/* TDB */
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
/* Lower halves of 128-bit VRs. */
FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3),
FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7),
FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11),
FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15),
/* And the next 16 VRs. */
FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19),
FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23),
FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27),
FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31),
};
#else /* __s390x__ */
/* Used for s390x-linux64, s390x-linux64v1, s390x-linux64v2, s390x-vx-linux64. */
static const int s390x_ft_collect_regmap[] = {
/* 64-bit PSWA and PSWM. */
FT_PSWM, FT_PSWA,
/* 64-bit GPRs. */
FT_GPR (0), FT_GPR (1), FT_GPR (2), FT_GPR (3),
FT_GPR (4), FT_GPR (5), FT_GPR (6), FT_GPR (7),
FT_GPR (8), FT_GPR (9), FT_GPR (10), FT_GPR (11),
FT_GPR (12), FT_GPR (13), FT_GPR (14), FT_GPR (15),
/* ACRs */
FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3),
FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7),
FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11),
FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15),
/* FPRs (mapped to upper halves of 128-bit VR slots). */
FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3),
FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7),
FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11),
FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15),
/* orig_r2, last_break, system_call */
-1, -1, -1,
/* Lower halves of 128-bit VRs. */
FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3),
FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7),
FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11),
FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15),
/* And the next 16 VRs. */
FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19),
FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23),
FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27),
FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31),
};
/* Used for s390x-te-linux64, s390x-tevx-linux64, and
s390x-gs-linux64. */
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
static const int s390x_te_ft_collect_regmap[] = {
/* 64-bit PSWA and PSWM. */
FT_PSWM, FT_PSWA,
/* 64-bit GPRs. */
FT_GPR (0), FT_GPR (1), FT_GPR (2), FT_GPR (3),
FT_GPR (4), FT_GPR (5), FT_GPR (6), FT_GPR (7),
FT_GPR (8), FT_GPR (9), FT_GPR (10), FT_GPR (11),
FT_GPR (12), FT_GPR (13), FT_GPR (14), FT_GPR (15),
/* ACRs */
FT_ACR (0), FT_ACR (1), FT_ACR (2), FT_ACR (3),
FT_ACR (4), FT_ACR (5), FT_ACR (6), FT_ACR (7),
FT_ACR (8), FT_ACR (9), FT_ACR (10), FT_ACR (11),
FT_ACR (12), FT_ACR (13), FT_ACR (14), FT_ACR (15),
/* FPRs (mapped to upper halves of 128-bit VR slots). */
FT_FPR (0), FT_FPR (1), FT_FPR (2), FT_FPR (3),
FT_FPR (4), FT_FPR (5), FT_FPR (6), FT_FPR (7),
FT_FPR (8), FT_FPR (9), FT_FPR (10), FT_FPR (11),
FT_FPR (12), FT_FPR (13), FT_FPR (14), FT_FPR (15),
/* orig_r2, last_break, system_call */
-1, -1, -1,
/* TDB */
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1,
/* Lower halves of 128-bit VRs. */
FT_VR_L (0), FT_VR_L (1), FT_VR_L (2), FT_VR_L (3),
FT_VR_L (4), FT_VR_L (5), FT_VR_L (6), FT_VR_L (7),
FT_VR_L (8), FT_VR_L (9), FT_VR_L (10), FT_VR_L (11),
FT_VR_L (12), FT_VR_L (13), FT_VR_L (14), FT_VR_L (15),
/* And the next 16 VRs. */
FT_VR (16), FT_VR (17), FT_VR (18), FT_VR (19),
FT_VR (20), FT_VR (21), FT_VR (22), FT_VR (23),
FT_VR (24), FT_VR (25), FT_VR (26), FT_VR (27),
FT_VR (28), FT_VR (29), FT_VR (30), FT_VR (31),
};
#endif
/* Initialized by get_ipa_tdesc according to the tdesc in use. */
static const int *s390_regmap;
static int s390_regnum;
/* Fill in REGCACHE with registers saved by the jump pad in BUF. */
void
supply_fast_tracepoint_registers (struct regcache *regcache,
const unsigned char *buf)
{
int i;
for (i = 0; i < s390_regnum; i++)
if (s390_regmap[i] != -1)
supply_register (regcache, i, ((char *) buf) + s390_regmap[i]);
}
gdbserver/IPA: Export some functions via global function pointers. On powerpc64, qSymbol for a function returns the function code address, and not the descriptor address. Since we emit code calling gdb_collect and some other functions, we need the descriptor (no way to know the proper TOC address without it). To get the descriptor address, make global function pointer variables in the IPA pointing to the relevant functions and read them instead of asking for them directly via qSymbol. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c: Rename gdb_agent_get_raw_reg to get_raw_reg. * linux-amd64-ipa.c: Likewise. * linux-i386-ipa.c: Likewise. * linux-s390-ipa.c: Likewise. * tracepoint.c: IPA-export gdb_collect_ptr instead of gdb_collect, ditto for get_raw_reg_ptr, get_trace_state_variable_value_ptr, set_trace_state_variable_value_ptr. (struct ipa_sym_addresses): Likewise. (symbol_list): Likewise. (install_fast_tracepoint): Dereference gdb_collect_ptr instead of accessing gdb_collect directly. (gdb_collect_ptr_type): New typedef. (get_raw_reg_ptr_type): New typedef. (get_trace_state_variable_value_ptr_type): New typedef. (set_trace_state_variable_value_ptr_type): New typedef. (gdb_collect_ptr): New global. (get_raw_reg_ptr): New global. (get_trace_state_variable_value_ptr): New global. (set_trace_state_variable_value_ptr): New global. (get_raw_reg_func_addr): Dereference get_raw_reg_ptr instead of accessing get_raw_reg directly. (get_get_tsv_func_addr): Likewise for get_trace_state_variable_value_ptr. (get_set_tsv_func_addr): Likewise for set_trace_state_variable_value_ptr. * tracepoint.h: Rename gdb_agent_get_raw_reg to get_raw_reg.
2016-03-11 22:51:29 +08:00
ULONGEST
get_raw_reg (const unsigned char *raw_regs, int regnum)
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
{
int offset;
if (regnum >= s390_regnum)
return 0;
offset = s390_regmap[regnum];
if (offset == -1)
return 0;
/* The regnums are variable, better to figure out size by FT offset. */
/* 64-bit ones. */
if (offset < FT_VR(16)
#ifdef __s390x__
|| (offset >= FT_GPR(0) && offset < FT_ACR(0))
|| offset == FT_PSWM
|| offset == FT_PSWA
#endif
)
return *(uint64_t *) (raw_regs + offset);
if (offset >= FT_ACR(0 && offset < FT_PSWM)
|| offset == FT_FPC
#ifndef __s390x__
|| (offset >= FT_GPR(0) && offset < FT_ACR(0))
|| offset == FT_PSWM_U
|| offset == FT_PSWA_L
#endif
)
return *(uint32_t *) (raw_regs + offset);
/* This leaves 128-bit VX. No way to return them. */
return 0;
}
/* Return target_desc to use for IPA, given the tdesc index passed by
gdbserver. For s390, it also sets s390_regmap and s390_regnum. */
const struct target_desc *
get_ipa_tdesc (int idx)
{
#define SET_REGMAP(regmap, skip_last) \
do { \
s390_regmap = regmap; \
s390_regnum = (sizeof regmap / sizeof regmap[0]) - skip_last; \
} while(0)
switch (idx)
{
#ifdef __s390x__
case S390_TDESC_64:
/* Subtract number of VX regs. */
SET_REGMAP(s390x_ft_collect_regmap, 32);
return tdesc_s390x_linux64;
case S390_TDESC_64V1:
SET_REGMAP(s390x_ft_collect_regmap, 32);
return tdesc_s390x_linux64v1;
case S390_TDESC_64V2:
SET_REGMAP(s390x_ft_collect_regmap, 32);
return tdesc_s390x_linux64v2;
case S390_TDESC_TE:
SET_REGMAP(s390x_te_ft_collect_regmap, 32);
return tdesc_s390x_te_linux64;
case S390_TDESC_VX:
SET_REGMAP(s390x_ft_collect_regmap, 0);
return tdesc_s390x_vx_linux64;
case S390_TDESC_TEVX:
SET_REGMAP(s390x_te_ft_collect_regmap, 0);
return tdesc_s390x_tevx_linux64;
case S390_TDESC_GS:
SET_REGMAP(s390x_te_ft_collect_regmap, 0);
return tdesc_s390x_gs_linux64;
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#else
case S390_TDESC_32:
SET_REGMAP(s390_linux32_ft_collect_regmap, 0);
return tdesc_s390_linux32;
case S390_TDESC_32V1:
SET_REGMAP(s390_linux32_ft_collect_regmap, 0);
return tdesc_s390_linux32v1;
case S390_TDESC_32V2:
SET_REGMAP(s390_linux32_ft_collect_regmap, 0);
return tdesc_s390_linux32v2;
case S390_TDESC_64:
SET_REGMAP(s390_linux64_ft_collect_regmap, 32);
return tdesc_s390_linux64;
case S390_TDESC_64V1:
SET_REGMAP(s390_linux64_ft_collect_regmap, 32);
return tdesc_s390_linux64v1;
case S390_TDESC_64V2:
SET_REGMAP(s390_linux64_ft_collect_regmap, 32);
return tdesc_s390_linux64v2;
case S390_TDESC_TE:
SET_REGMAP(s390_te_linux64_ft_collect_regmap, 32);
return tdesc_s390_te_linux64;
case S390_TDESC_VX:
SET_REGMAP(s390_linux64_ft_collect_regmap, 0);
return tdesc_s390_vx_linux64;
case S390_TDESC_TEVX:
SET_REGMAP(s390_te_linux64_ft_collect_regmap, 0);
return tdesc_s390_tevx_linux64;
case S390_TDESC_GS:
[gdbserver] Fix s390x -m31 gdbserver build When building gdb on s390x with -m31, we run into this error: ... gdb/gdbserver/linux-s390-ipa.c: \ In function 'const target_desc* get_ipa_tdesc(int)': gdb/gdbserver/linux-s390-ipa.c:371:18: error: 's390_te_ft_collect_regmap' \ was not declared in this scope SET_REGMAP(s390_te_ft_collect_regmap, 0); The offending line is part of this code snippet: ... case S390_TDESC_GS: SET_REGMAP(s390_te_ft_collect_regmap, 0); return tdesc_s390_gs_linux64; ... introduced in commit ce29f8439f "S390: Make IPA recognize tdescs with guarded storage". The snippet is part of an #ifdef __s390x__ construct, in the false branch, and in the true branch we find a snippet introduced by the same commit: ... case S390_TDESC_GS: SET_REGMAP(s390x_te_ft_collect_regmap, 0); return tdesc_s390x_gs_linux64; ... which is paired with a comment update for s390x_te_ft_collect_regmap: ... -/* Used for s390x-te-linux64, s390x-tevx-linux64. */ +/* Used for s390x-te-linux64, s390x-tevx-linux64, and + s390x-gs-linux64. */ static const int s390x_te_ft_collect_regmap[] = { ... A similar comment update is added in the same commit for s390_te_linux64_ft_collect_regmap: ... -/* Used for s390-te-linux64, s390-tevx-linux64. */ +/* Used for s390-te-linux64, s390-tevx-linux64, and s390-gs-linux64. */ static const int s390_te_linux64_ft_collect_regmap[] = { ... but not paired with any update. Fix the build breaker by making the offending SET_REGMAP use the regmap indicated by the comment. ... - SET_REGMAP(s390_te_ft_collect_regmap, 0); + SET_REGMAP(s390_te_linux64_ft_collect_regmap, 0); ... Build on s390x-linux with -m31. gdb/gdbserver/ChangeLog: 2019-06-20 Tom de Vries <tdevries@suse.de> * linux-s390-ipa.c (get_ipa_tdesc)[!__s390x__]: Use s390_te_linux64_ft_collect_regmap for S390_TDESC_GS.
2019-06-20 17:31:36 +08:00
SET_REGMAP(s390_te_linux64_ft_collect_regmap, 0);
return tdesc_s390_gs_linux64;
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#endif
default:
internal_error (__FILE__, __LINE__,
"unknown ipa tdesc index: %d", idx);
#ifdef __s390x__
return tdesc_s390x_linux64;
#else
return tdesc_s390_linux32;
#endif
}
}
IPA: Add alloc_jump_pad_buffer target hook. Targets may have various requirements on the required location of the jump pad area. Currently IPA allocates it at the lowest possible address, so that it is reachable by branches from the executable. However, this fails on powerpc, which has executable link address (0x10000000) much larger than branch reach (+/- 32MiB). This makes jump pad buffer allocation a target hook instead. The current implementations are as follows: - i386 and s390: Branches can reach anywhere, so just mmap it. This avoids the linear search dance. - x86_64: Branches have +/-2GiB of reach, and executable is loaded low, so just call mmap with MAP_32BIT. Likewise avoids the linear search. - aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB. Do a linear search from 4MiB-size downwards to page_size. - s390x: Branches have +-4GiB of reach, executable loaded at 2GiB. Do like on aarch64. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * linux-amd64-ipa.c: Add <sys/mman.h> include. (alloc_jump_pad_buffer): New function. * linux-i386-ipa.c (alloc_jump_pad_buffer): New function. * linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes. (alloc_jump_pad_buffer): New function. * tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function. (initialize_tracepoint): Delegate to alloc_jump_pad_buffer. * tracepoint.h (alloc_jump_pad_buffer): New prototype. (getauxval) [!HAVE_GETAUXVAL]: New prototype.
2016-03-13 07:30:11 +08:00
/* Allocate buffer for the jump pads. On 31-bit, JG reaches everywhere,
so just allocate normally. On 64-bit, we have +/-4GiB of reach, and
the executable is usually mapped at 0x80000000 - aim for somewhere
below it. */
void *
alloc_jump_pad_buffer (size_t size)
{
#ifdef __s390x__
uintptr_t addr;
uintptr_t exec_base = getauxval (AT_PHDR);
int pagesize;
void *res;
if (exec_base == 0)
exec_base = 0x80000000;
pagesize = sysconf (_SC_PAGE_SIZE);
if (pagesize == -1)
perror_with_name ("sysconf");
addr = exec_base - size;
/* size should already be page-aligned, but this can't hurt. */
addr &= ~(pagesize - 1);
/* Search for a free area. If we hit 0, we're out of luck. */
for (; addr; addr -= pagesize)
{
/* No MAP_FIXED - we don't want to zap someone's mapping. */
res = mmap ((void *) addr, size,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
/* If we got what we wanted, return. */
if ((uintptr_t) res == addr)
return res;
/* If we got a mapping, but at a wrong address, undo it. */
if (res != MAP_FAILED)
munmap (res, size);
}
return NULL;
#else
void *res = mmap (NULL, size, PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (res == MAP_FAILED)
return NULL;
return res;
#endif
}
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
void
initialize_low_tracepoint (void)
{
#ifdef __s390x__
init_registers_s390x_linux64 ();
init_registers_s390x_linux64v1 ();
init_registers_s390x_linux64v2 ();
init_registers_s390x_te_linux64 ();
init_registers_s390x_vx_linux64 ();
init_registers_s390x_tevx_linux64 ();
init_registers_s390x_gs_linux64 ();
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#else
init_registers_s390_linux32 ();
init_registers_s390_linux32v1 ();
init_registers_s390_linux32v2 ();
init_registers_s390_linux64 ();
init_registers_s390_linux64v1 ();
init_registers_s390_linux64v2 ();
init_registers_s390_te_linux64 ();
init_registers_s390_vx_linux64 ();
init_registers_s390_tevx_linux64 ();
init_registers_s390_gs_linux64 ();
gdbserver/s390: Add fast tracepoint support. Fast tracepoints will only work on 6-byte intructions, and assume at least a z900 CPU. s390 also has 4-byte jump instructions, which also work on pre-z900, but their range is limitted to +-64kiB, which is not very useful (and wouldn't work at all with current jump pad allocation). There's a little problem with s390_relocate_instruction function: it converts BRAS/BRASL instructions to LARL of the return address + JG to the target address. On 31-bit, this sets the high bit of the target register to 0, while BRAS/BRASL would set it to 1. While this is not a problem when the result is only used to address memory, it could possibly break something that expects to compare such addresses for equality without first masking the bit off. In particular, I'm not sure whether leaving the return address high bit unset is ABI-compliant (could confuse some unwinder?). If that's a problem, it could be fixed by handling it in the jump pad (since at that point we can just modify the GPRs in the save area without having to worry about preserving CCs and only having that one GPR to work with - I'm not sure if it's even possible to set the high bit with such constraints). gdb/gdbserver/ChangeLog: PR 18377 * Makefile.in: Add s390 IPA files. * configure.srv: Build IPA for s390. * linux-s390-ipa.c: New file. * linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h. (init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h. (tdesc_s390_linux32): Likewise. (init_registers_s390_linux32v1): Likewise. (tdesc_s390_linux32v1): Likewise. (init_registers_s390_linux32v2): Likewise. (tdesc_s390_linux32v2): Likewise. (init_registers_s390_linux64): Likewise. (tdesc_s390_linux64): Likewise. (init_registers_s390_linux64v1): Likewise. (tdesc_s390_linux64v1): Likewise. (init_registers_s390_linux64v2): Likewise. (tdesc_s390_linux64v2): Likewise. (init_registers_s390_te_linux64): Likewise. (tdesc_s390_te_linux64): Likewise. (init_registers_s390_vx_linux64): Likewise. (tdesc_s390_vx_linux64): Likewise. (init_registers_s390_tevx_linux64): Likewise. (tdesc_s390_tevx_linux64): Likewise. (init_registers_s390x_linux64): Likewise. (tdesc_s390x_linux64): Likewise. (init_registers_s390x_linux64v1): Likewise. (tdesc_s390x_linux64v1): Likewise. (init_registers_s390x_linux64v2): Likewise. (tdesc_s390x_linux64v2): Likewise. (init_registers_s390x_te_linux64): Likewise. (tdesc_s390x_te_linux64): Likewise. (init_registers_s390x_vx_linux64): Likewise. (tdesc_s390x_vx_linux64): Likewise. (init_registers_s390x_tevx_linux64): Likewise. (tdesc_s390x_tevx_linux64): Likewise. (have_hwcap_s390_vx): New static variable. (s390_arch_setup): Fill have_hwcap_s390_vx. (s390_get_thread_area): New function. (s390_ft_entry_gpr_esa): New const. (s390_ft_entry_gpr_zarch): New const. (s390_ft_entry_misc): New const. (s390_ft_entry_fr): New const. (s390_ft_entry_vr): New const. (s390_ft_main_31): New const. (s390_ft_main_64): New const. (s390_ft_exit_fr): New const. (s390_ft_exit_vr): New const. (s390_ft_exit_misc): New const. (s390_ft_exit_gpr_esa): New const. (s390_ft_exit_gpr_zarch): New const. (append_insns): New function. (s390_relocate_instruction): New function. (s390_install_fast_tracepoint_jump_pad): New function. (s390_get_min_fast_tracepoint_insn_len): New function. (s390_get_ipa_tdesc_idx): New function. (struct linux_target_ops): Wire in the above functions. (initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs. * linux-s390-tdesc.h: New file.
2016-01-18 05:59:06 +08:00
#endif
}