PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
/* Low-level file-handling.
|
2022-01-01 22:56:03 +08:00
|
|
|
Copyright (C) 2012-2022 Free Software Foundation, Inc.
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
2019-01-28 03:51:36 +08:00
|
|
|
#ifndef COMMON_FILESTUFF_H
|
|
|
|
#define COMMON_FILESTUFF_H
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
|
2018-05-03 14:18:20 +08:00
|
|
|
#include <dirent.h>
|
Use mkostemp, not mkstemp
I noticed that gdb could leak file descriptors coming from mkstemp.
This patch fixes the problem by importing the gnulib mkostemp instead,
and then changing gdb to pass O_CLOEXEC.
A small gnulib patch was needed. This has already been accepted
upstream.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* unittests/scoped_mmap-selftests.c (test_normal): Use
gdb_mkostemp_cloexec.
* unittests/scoped_fd-selftests.c (test_destroy, test_release):
Use gdb_mkostemp_cloexec.
* gnulib/aclocal-m4-deps.mk, gnulib/aclocal.m4,
gnulib/config.in, gnulib/configure,
gnulib/import/Makefile.am, gnulib/import/Makefile.in,
gnulib/import/m4/gnulib-cache.m4,
gnulib/import/m4/gnulib-comp.m4: Update.
* gnulib/import/m4/mkostemp.m4: New file.
* gnulib/import/m4/mkstemp.m4: Remove.
* gnulib/import/mkostemp.c: New file.
* gnulib/import/mkstemp.m4: Remove.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Remove
mkstemp, add mkostemp. Apply new patch.
* gnulib/import/stdlib.in.h: Apply patch.
* gnulib/patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch:
New file.
* dwarf-index-write.c (write_psymtabs_to_index): Use
gdb_mkostemp_cloexec.
* common/filestuff.h (gdb_mkostemp_cloexec): New function.
2018-09-21 06:04:04 +08:00
|
|
|
#include <fcntl.h>
|
2021-07-22 23:34:57 +08:00
|
|
|
#include "gdb_file.h"
|
2021-07-22 23:56:33 +08:00
|
|
|
#include "scoped_fd.h"
|
2018-05-03 14:18:20 +08:00
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
/* Note all the file descriptors which are open when this is called.
|
|
|
|
These file descriptors will not be closed by close_most_fds. */
|
|
|
|
|
|
|
|
extern void notice_open_fds (void);
|
|
|
|
|
2013-05-11 01:01:00 +08:00
|
|
|
/* Mark a file descriptor as inheritable across an exec. */
|
|
|
|
|
|
|
|
extern void mark_fd_no_cloexec (int fd);
|
|
|
|
|
|
|
|
/* Mark a file descriptor as no longer being inheritable across an
|
|
|
|
exec. This is only meaningful when FD was previously passed to
|
|
|
|
mark_fd_no_cloexec. */
|
|
|
|
|
|
|
|
extern void unmark_fd_no_cloexec (int fd);
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
/* Close all open file descriptors other than those marked by
|
|
|
|
'notice_open_fds', and stdin, stdout, and stderr. Errors that
|
|
|
|
occur while closing are ignored. */
|
|
|
|
|
|
|
|
extern void close_most_fds (void);
|
|
|
|
|
|
|
|
/* Like 'open', but ensures that the returned file descriptor has the
|
|
|
|
close-on-exec flag set. */
|
|
|
|
|
2021-07-22 23:56:33 +08:00
|
|
|
extern scoped_fd gdb_open_cloexec (const char *filename, int flags,
|
|
|
|
/* mode_t */ unsigned long mode);
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
|
Use mkostemp, not mkstemp
I noticed that gdb could leak file descriptors coming from mkstemp.
This patch fixes the problem by importing the gnulib mkostemp instead,
and then changing gdb to pass O_CLOEXEC.
A small gnulib patch was needed. This has already been accepted
upstream.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* unittests/scoped_mmap-selftests.c (test_normal): Use
gdb_mkostemp_cloexec.
* unittests/scoped_fd-selftests.c (test_destroy, test_release):
Use gdb_mkostemp_cloexec.
* gnulib/aclocal-m4-deps.mk, gnulib/aclocal.m4,
gnulib/config.in, gnulib/configure,
gnulib/import/Makefile.am, gnulib/import/Makefile.in,
gnulib/import/m4/gnulib-cache.m4,
gnulib/import/m4/gnulib-comp.m4: Update.
* gnulib/import/m4/mkostemp.m4: New file.
* gnulib/import/m4/mkstemp.m4: Remove.
* gnulib/import/mkostemp.c: New file.
* gnulib/import/mkstemp.m4: Remove.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Remove
mkstemp, add mkostemp. Apply new patch.
* gnulib/import/stdlib.in.h: Apply patch.
* gnulib/patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch:
New file.
* dwarf-index-write.c (write_psymtabs_to_index): Use
gdb_mkostemp_cloexec.
* common/filestuff.h (gdb_mkostemp_cloexec): New function.
2018-09-21 06:04:04 +08:00
|
|
|
/* Like mkstemp, but ensures that the file descriptor is
|
|
|
|
close-on-exec. */
|
|
|
|
|
2021-07-23 03:33:42 +08:00
|
|
|
static inline scoped_fd
|
Use mkostemp, not mkstemp
I noticed that gdb could leak file descriptors coming from mkstemp.
This patch fixes the problem by importing the gnulib mkostemp instead,
and then changing gdb to pass O_CLOEXEC.
A small gnulib patch was needed. This has already been accepted
upstream.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* unittests/scoped_mmap-selftests.c (test_normal): Use
gdb_mkostemp_cloexec.
* unittests/scoped_fd-selftests.c (test_destroy, test_release):
Use gdb_mkostemp_cloexec.
* gnulib/aclocal-m4-deps.mk, gnulib/aclocal.m4,
gnulib/config.in, gnulib/configure,
gnulib/import/Makefile.am, gnulib/import/Makefile.in,
gnulib/import/m4/gnulib-cache.m4,
gnulib/import/m4/gnulib-comp.m4: Update.
* gnulib/import/m4/mkostemp.m4: New file.
* gnulib/import/m4/mkstemp.m4: Remove.
* gnulib/import/mkostemp.c: New file.
* gnulib/import/mkstemp.m4: Remove.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Remove
mkstemp, add mkostemp. Apply new patch.
* gnulib/import/stdlib.in.h: Apply patch.
* gnulib/patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch:
New file.
* dwarf-index-write.c (write_psymtabs_to_index): Use
gdb_mkostemp_cloexec.
* common/filestuff.h (gdb_mkostemp_cloexec): New function.
2018-09-21 06:04:04 +08:00
|
|
|
gdb_mkostemp_cloexec (char *name_template, int flags = 0)
|
|
|
|
{
|
|
|
|
/* gnulib provides a mkostemp replacement if needed. */
|
2021-07-23 03:33:42 +08:00
|
|
|
return scoped_fd (mkostemp (name_template, flags | O_CLOEXEC));
|
Use mkostemp, not mkstemp
I noticed that gdb could leak file descriptors coming from mkstemp.
This patch fixes the problem by importing the gnulib mkostemp instead,
and then changing gdb to pass O_CLOEXEC.
A small gnulib patch was needed. This has already been accepted
upstream.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* unittests/scoped_mmap-selftests.c (test_normal): Use
gdb_mkostemp_cloexec.
* unittests/scoped_fd-selftests.c (test_destroy, test_release):
Use gdb_mkostemp_cloexec.
* gnulib/aclocal-m4-deps.mk, gnulib/aclocal.m4,
gnulib/config.in, gnulib/configure,
gnulib/import/Makefile.am, gnulib/import/Makefile.in,
gnulib/import/m4/gnulib-cache.m4,
gnulib/import/m4/gnulib-comp.m4: Update.
* gnulib/import/m4/mkostemp.m4: New file.
* gnulib/import/m4/mkstemp.m4: Remove.
* gnulib/import/mkostemp.c: New file.
* gnulib/import/mkstemp.m4: Remove.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Remove
mkstemp, add mkostemp. Apply new patch.
* gnulib/import/stdlib.in.h: Apply patch.
* gnulib/patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch:
New file.
* dwarf-index-write.c (write_psymtabs_to_index): Use
gdb_mkostemp_cloexec.
* common/filestuff.h (gdb_mkostemp_cloexec): New function.
2018-09-21 06:04:04 +08:00
|
|
|
}
|
|
|
|
|
2018-08-08 05:43:08 +08:00
|
|
|
/* Convenience wrapper for the above, which takes the filename as an
|
|
|
|
std::string. */
|
|
|
|
|
2021-07-22 23:56:33 +08:00
|
|
|
static inline scoped_fd
|
2018-08-08 05:43:08 +08:00
|
|
|
gdb_open_cloexec (const std::string &filename, int flags,
|
|
|
|
/* mode_t */ unsigned long mode)
|
|
|
|
{
|
|
|
|
return gdb_open_cloexec (filename.c_str (), flags, mode);
|
|
|
|
}
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
/* Like 'fopen', but ensures that the returned file descriptor has the
|
|
|
|
close-on-exec flag set. */
|
|
|
|
|
Introduce and use gdb_file_up
This introduces gdb_file_up, a unique pointer holding a FILE*, and
then changes some code in gdb to use it. In particular
gdb_fopen_cloexec now returns a gdb_file_up. This allow removing some
cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* xml-support.c (xml_fetch_content_from_file): Update.
* ui-file.c (stdio_file::open): Update.
* tracefile-tfile.c (tfile_start): Update.
* remote.c (remote_file_put, remote_file_get): Update.
* nat/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_get_state, linux_proc_tid_get_name): Update.
* nat/linux-osdata.c (linux_common_core_of_thread): Update.
(command_from_pid, commandline_from_pid, linux_xfer_osdata_cpus)
(print_sockets, linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Update.
* nat/linux-btrace.c (linux_determine_kernel_start): Update.
* linux-nat.c (linux_proc_pending_signals): Update.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_file_up.
(file_closer): Remove.
* compile/compile.c (compile_to_object): Update.
* common/filestuff.h (struct gdb_file_deleter): New.
(gdb_file_up): New typedef.
(gdb_fopen_cloexec): Change return type.
* common/filestuff.c (gdb_fopen_cloexec): Return gdb_file_up.
* cli/cli-dump.c (fopen_with_cleanup): Remove.
(dump_binary_file, restore_binary_file): Update.
* auto-load.c (auto_load_objfile_script_1): Update.
2017-04-27 11:39:46 +08:00
|
|
|
extern gdb_file_up gdb_fopen_cloexec (const char *filename,
|
|
|
|
const char *opentype);
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
|
2018-08-08 05:43:08 +08:00
|
|
|
/* Convenience wrapper for the above, which takes the filename as an
|
|
|
|
std::string. */
|
|
|
|
|
|
|
|
static inline gdb_file_up
|
|
|
|
gdb_fopen_cloexec (const std::string &filename, const char *opentype)
|
|
|
|
{
|
|
|
|
return gdb_fopen_cloexec (filename.c_str (), opentype);
|
|
|
|
}
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
/* Like 'socketpair', but ensures that the returned file descriptors
|
|
|
|
have the close-on-exec flag set. */
|
|
|
|
|
2015-02-28 00:33:07 +08:00
|
|
|
extern int gdb_socketpair_cloexec (int domain, int style, int protocol,
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
int filedes[2]);
|
|
|
|
|
|
|
|
/* Like 'socket', but ensures that the returned file descriptor has
|
|
|
|
the close-on-exec flag set. */
|
|
|
|
|
2015-02-28 00:33:07 +08:00
|
|
|
extern int gdb_socket_cloexec (int domain, int style, int protocol);
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-23 00:46:15 +08:00
|
|
|
|
|
|
|
/* Like 'pipe', but ensures that the returned file descriptors have
|
|
|
|
the close-on-exec flag set. */
|
|
|
|
|
|
|
|
extern int gdb_pipe_cloexec (int filedes[2]);
|
|
|
|
|
2018-05-03 14:18:20 +08:00
|
|
|
struct gdb_dir_deleter
|
|
|
|
{
|
|
|
|
void operator() (DIR *dir) const
|
|
|
|
{
|
|
|
|
closedir (dir);
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
/* A unique pointer to a DIR. */
|
|
|
|
|
|
|
|
typedef std::unique_ptr<DIR, gdb_dir_deleter> gdb_dir_up;
|
|
|
|
|
Move 'is_regular_file' from common-utils.c to filestuff.c
There is no reason for 'is_regular_file' to be in common-utils.c; it
belongs to 'filestuff.c'. This commit moves the function definition
and its prototype to the appropriate files.
The motivation behind this move is a failure that happens on certain
cross-compilation environments when compiling the IPA library, due to
the way gnulib probes the need for a 'stat' call replacement. Because
configure checks when cross-compiling are more limited, gnulib decides
that it needs to substitute the 'stat' calls its own 'rpl_stat';
however, the IPA library doesn't link with gnulib, which leads to an
error when compiling 'common-utils.c':
...
/opt/x86-core2--musl--bleeding-edge-2018.09-1/bin/i686-buildroot-linux-musl-g++ -shared -fPIC -Wl,--soname=libinproctrace.so -Wl,--no-undefined -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -I. -I. -I./../common -I./../regformats -I./.. -I./../../include -I./../gnulib/import -Ibuild-gnulib-gdbserver/import -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-narrowing -Wno-error=maybe-uninitialized -DGDBSERVER \
-Wl,--dynamic-list=./proc-service.list -o libinproctrace.so ax-ipa.o common-utils-ipa.o errors-ipa.o format-ipa.o print-utils-ipa.o regcache-ipa.o remote-utils-ipa.o rsp-low-ipa.o tdesc-ipa.o tracepoint-ipa.o utils-ipa.o vec-ipa.o linux-i386-ipa.o linux-x86-tdesc-ipa.o arch/i386-ipa.o -ldl -pthread
/opt/x86-core2--musl--bleeding-edge-2018.09-1/lib/gcc/i686-buildroot-linux-musl/8.2.0/../../../../i686-buildroot-linux-musl/bin/ld: common-utils-ipa.o: in function `is_regular_file(char const*, int*)':
common-utils.c:(.text+0x695): undefined reference to `rpl_stat'
collect2: error: ld returned 1 exit status
Makefile:413: recipe for target 'libinproctrace.so' failed
make[1]: *** [libinproctrace.so] Error 1
...
More details can also be found at:
https://sourceware.org/ml/gdb-patches/2018-09/msg00304.html
The most simple fix for this problem is to move 'is_regular_file' to
'filestuff.c', which is not used by IPA. This ends up making the
files more logically organized as well, since 'is_regular_file' is a
file operation.
No regressions found.
gdb/ChangeLog:
2018-09-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c: Don't include '<sys/stat.h>'.
(is_regular_file): Move to...
* common/filestuff.c (is_regular_file): ... here.
* common/common-utils.h (is_regular_file): Move to...
* common/filestuff.h (is_regular_file): ... here.
2018-09-13 01:16:02 +08:00
|
|
|
/* Return true if the file NAME exists and is a regular file.
|
|
|
|
If the result is false then *ERRNO_PTR is set to a useful value assuming
|
|
|
|
we're expecting a regular file. */
|
|
|
|
extern bool is_regular_file (const char *name, int *errno_ptr);
|
|
|
|
|
2018-09-18 00:48:20 +08:00
|
|
|
|
|
|
|
/* A cheap (as in low-quality) recursive mkdir. Try to create all the
|
|
|
|
parents directories up to DIR and DIR itself. Stop if we hit an
|
|
|
|
error along the way. There is no attempt to remove created
|
|
|
|
directories in case of failure.
|
|
|
|
|
|
|
|
Returns false on failure and sets errno. */
|
|
|
|
|
|
|
|
extern bool mkdir_recursive (const char *dir);
|
|
|
|
|
2019-01-28 03:51:36 +08:00
|
|
|
#endif /* COMMON_FILESTUFF_H */
|