binutils-gdb/bfd/coff-mips.c

/* BFD back-end for MIPS Extended-Coff files.
   Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
   Original version by Per Bothner.
   Full support added by Ian Lance Taylor, ian@cygnus.com.

This file is part of BFD, the Binary File Descriptor library.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

#include "bfd.h"
#include "sysdep.h"
#include "libbfd.h"
#include "seclet.h"
#include "coff/internal.h"
#include "coff/sym.h"
#include "coff/symconst.h"
#include "coff/ecoff.h"
#include "coff/mips.h"
#include "libcoff.h"
#include "libecoff.h"

/* Prototypes for static functions.  */

static boolean mips_ecoff_bad_format_hook PARAMS ((bfd *abfd, PTR filehdr));
static void mips_ecoff_swap_reloc_in PARAMS ((bfd *, PTR,
					      struct internal_reloc *));
static void mips_ecoff_swap_reloc_out PARAMS ((bfd *,
					       const struct internal_reloc *,
					       PTR));
static void mips_adjust_reloc_in PARAMS ((bfd *,
					  const struct internal_reloc *,
					  arelent *));
static void mips_adjust_reloc_out PARAMS ((bfd *, const arelent *,
					   struct internal_reloc *));
static bfd_reloc_status_type mips_generic_reloc PARAMS ((bfd *abfd,
							 arelent *reloc,
							 asymbol *symbol,
							 PTR data,
							 asection *section,
							 bfd *output_bfd));
static bfd_reloc_status_type mips_refhi_reloc PARAMS ((bfd *abfd,
						       arelent *reloc,
						       asymbol *symbol,
						       PTR data,
						       asection *section,
						       bfd *output_bfd));
static bfd_reloc_status_type mips_reflo_reloc PARAMS ((bfd *abfd,
						       arelent *reloc,
						       asymbol *symbol,
						       PTR data,
						       asection *section,
						       bfd *output_bfd));
static bfd_reloc_status_type mips_gprel_reloc PARAMS ((bfd *abfd,
						       arelent *reloc,
						       asymbol *symbol,
						       PTR data,
						       asection *section,
						       bfd *output_bfd));

/* ECOFF has COFF sections, but the debugging information is stored in
   a completely different format.  ECOFF targets use some of the
   swapping routines from coffswap.h, and some of the generic COFF
   routines in coffgen.c, but, unlike the real COFF targets, do not
   use coffcode.h itself.

   Get the generic COFF swapping routines, except for the reloc,
   symbol, and lineno ones.  Give them ECOFF names.  */
#define MIPSECOFF
#define NO_COFF_RELOCS
#define NO_COFF_SYMBOLS
#define NO_COFF_LINENOS
#define coff_swap_filehdr_in mips_ecoff_swap_filehdr_in
#define coff_swap_filehdr_out mips_ecoff_swap_filehdr_out
#define coff_swap_aouthdr_in mips_ecoff_swap_aouthdr_in
#define coff_swap_aouthdr_out mips_ecoff_swap_aouthdr_out
#define coff_swap_scnhdr_in mips_ecoff_swap_scnhdr_in
#define coff_swap_scnhdr_out mips_ecoff_swap_scnhdr_out
#include "coffswap.h"

/* Get the ECOFF swapping routines.  */
#define ECOFF_32
#include "ecoffswap.h"

/* How to process the various relocs types.  */

static reloc_howto_type mips_howto_table[] =
{
  /* Reloc type 0 is ignored.  The reloc reading code ensures that
     this is a reference to the .abs section, which will cause
     bfd_perform_relocation to do nothing.  */
  HOWTO (MIPS_R_IGNORE,	/* type */
	 0,			/* rightshift */
	 0,			/* size (0 = byte, 1 = short, 2 = long) */
	 8,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */
	 0,			/* special_function */
	 "IGNORE",		/* name */
	 false,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 false),		/* pcrel_offset */

  /* A 16 bit reference to a symbol, normally from a data section.  */
  HOWTO (MIPS_R_REFHALF,	/* type */
	 0,			/* rightshift */
	 1,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 mips_generic_reloc,	/* special_function */
	 "REFHALF",		/* name */
	 true,			/* partial_inplace */
	 0xffff,		/* src_mask */
	 0xffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* A 32 bit reference to a symbol, normally from a data section.  */
  HOWTO (MIPS_R_REFWORD,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 mips_generic_reloc,	/* special_function */
	 "REFWORD",		/* name */
	 true,			/* partial_inplace */
	 0xffffffff,		/* src_mask */
	 0xffffffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* A 26 bit absolute jump address.  */
  HOWTO (MIPS_R_JMPADDR,	/* type */
	 2,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 26,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */
	 			/* This needs complex overflow
				   detection, because the upper four
				   bits must match the PC.  */
	 mips_generic_reloc,	/* special_function */
	 "JMPADDR",		/* name */
	 true,			/* partial_inplace */
	 0x3ffffff,		/* src_mask */
	 0x3ffffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* The high 16 bits of a symbol value.  Handled by the function
     mips_refhi_reloc.  */
  HOWTO (MIPS_R_REFHI,		/* type */
	 16,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 mips_refhi_reloc,	/* special_function */
	 "REFHI",		/* name */
	 true,			/* partial_inplace */
	 0xffff,		/* src_mask */
	 0xffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* The low 16 bits of a symbol value.  */
  HOWTO (MIPS_R_REFLO,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */
	 mips_reflo_reloc,	/* special_function */
	 "REFLO",		/* name */
	 true,			/* partial_inplace */
	 0xffff,		/* src_mask */
	 0xffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* A reference to an offset from the gp register.  Handled by the
     function mips_gprel_reloc.  */
  HOWTO (MIPS_R_GPREL,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_signed, /* complain_on_overflow */
	 mips_gprel_reloc,	/* special_function */
	 "GPREL",		/* name */
	 true,			/* partial_inplace */
	 0xffff,		/* src_mask */
	 0xffff,		/* dst_mask */
	 false),		/* pcrel_offset */

  /* A reference to a literal using an offset from the gp register.
     Handled by the function mips_gprel_reloc.  */
  HOWTO (MIPS_R_LITERAL,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 false,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_signed, /* complain_on_overflow */
	 mips_gprel_reloc,	/* special_function */
	 "LITERAL",		/* name */
	 true,			/* partial_inplace */
	 0xffff,		/* src_mask */
	 0xffff,		/* dst_mask */
	 false)			/* pcrel_offset */
};

#define MIPS_HOWTO_COUNT \
  (sizeof mips_howto_table / sizeof mips_howto_table[0])

/* See whether the magic number matches.  */

static boolean
mips_ecoff_bad_format_hook (abfd, filehdr)
     bfd *abfd;
     PTR filehdr;
{
  struct internal_filehdr *internal_f = (struct internal_filehdr *) filehdr;

  switch (internal_f->f_magic)
    {
    case MIPS_MAGIC_1:
      /* I don't know what endianness this implies.  */
      return true;

    case MIPS_MAGIC_BIG:
    case MIPS_MAGIC_BIG2:
    case MIPS_MAGIC_BIG3:
      return abfd->xvec->byteorder_big_p;

    case MIPS_MAGIC_LITTLE:
    case MIPS_MAGIC_LITTLE2:
    case MIPS_MAGIC_LITTLE3:
      return abfd->xvec->byteorder_big_p == false;

    default:
      return false;
    }
}

/* Reloc handling.  MIPS ECOFF relocs are packed into 8 bytes in
   external form.  They use a bit which indicates whether the symbol
   is external.  */

/* Swap a reloc in.  */

static void
mips_ecoff_swap_reloc_in (abfd, ext_ptr, intern)
     bfd *abfd;
     PTR ext_ptr;
     struct internal_reloc *intern;
{
  const RELOC *ext = (RELOC *) ext_ptr;

  intern->r_vaddr = bfd_h_get_32 (abfd, (bfd_byte *) ext->r_vaddr);
  if (abfd->xvec->header_byteorder_big_p != false)
    {
      intern->r_symndx = (((int) ext->r_bits[0]
			   << RELOC_BITS0_SYMNDX_SH_LEFT_BIG)
			  | ((int) ext->r_bits[1]
			     << RELOC_BITS1_SYMNDX_SH_LEFT_BIG)
			  | ((int) ext->r_bits[2]
			     << RELOC_BITS2_SYMNDX_SH_LEFT_BIG));
      intern->r_type = ((ext->r_bits[3] & RELOC_BITS3_TYPE_BIG)
			>> RELOC_BITS3_TYPE_SH_BIG);
      intern->r_extern = (ext->r_bits[3] & RELOC_BITS3_EXTERN_BIG) != 0;
    }
  else
    {
      intern->r_symndx = (((int) ext->r_bits[0]
			   << RELOC_BITS0_SYMNDX_SH_LEFT_LITTLE)
			  | ((int) ext->r_bits[1]
			     << RELOC_BITS1_SYMNDX_SH_LEFT_LITTLE)
			  | ((int) ext->r_bits[2]
			     << RELOC_BITS2_SYMNDX_SH_LEFT_LITTLE));
      intern->r_type = ((ext->r_bits[3] & RELOC_BITS3_TYPE_LITTLE)
			>> RELOC_BITS3_TYPE_SH_LITTLE);
      intern->r_extern = (ext->r_bits[3] & RELOC_BITS3_EXTERN_LITTLE) != 0;
    }
}

/* Swap a reloc out.  */

static void
mips_ecoff_swap_reloc_out (abfd, intern, dst)
     bfd *abfd;
     const struct internal_reloc *intern;
     PTR dst;
{
  RELOC *ext = (RELOC *) dst;

  BFD_ASSERT (intern->r_extern
	      || (intern->r_symndx >= 0 && intern->r_symndx <= 12));

  bfd_h_put_32 (abfd, intern->r_vaddr, (bfd_byte *) ext->r_vaddr);
  if (abfd->xvec->header_byteorder_big_p != false)
    {
      ext->r_bits[0] = intern->r_symndx >> RELOC_BITS0_SYMNDX_SH_LEFT_BIG;
      ext->r_bits[1] = intern->r_symndx >> RELOC_BITS1_SYMNDX_SH_LEFT_BIG;
      ext->r_bits[2] = intern->r_symndx >> RELOC_BITS2_SYMNDX_SH_LEFT_BIG;
      ext->r_bits[3] = (((intern->r_type << RELOC_BITS3_TYPE_SH_BIG)
			 & RELOC_BITS3_TYPE_BIG)
			| (intern->r_extern ? RELOC_BITS3_EXTERN_BIG : 0));
    }
  else
    {
      ext->r_bits[0] = intern->r_symndx >> RELOC_BITS0_SYMNDX_SH_LEFT_LITTLE;
      ext->r_bits[1] = intern->r_symndx >> RELOC_BITS1_SYMNDX_SH_LEFT_LITTLE;
      ext->r_bits[2] = intern->r_symndx >> RELOC_BITS2_SYMNDX_SH_LEFT_LITTLE;
      ext->r_bits[3] = (((intern->r_type << RELOC_BITS3_TYPE_SH_LITTLE)
			 & RELOC_BITS3_TYPE_LITTLE)
			| (intern->r_extern ? RELOC_BITS3_EXTERN_LITTLE : 0));
    }
}

/* Finish canonicalizing a reloc.  Part of this is generic to all
   ECOFF targets, and that part is in ecoff.c.  The rest is done in
   this backend routine.  It must fill in the howto field.  */

static void
mips_adjust_reloc_in (abfd, intern, rptr)
     bfd *abfd;
     const struct internal_reloc *intern;
     arelent *rptr;
{
  if (intern->r_type > MIPS_R_LITERAL)
    abort ();

  if (! intern->r_extern
      && (intern->r_type == MIPS_R_GPREL
	  || intern->r_type == MIPS_R_LITERAL))
    rptr->addend += ecoff_data (abfd)->gp;

  /* If the type is MIPS_R_IGNORE, make sure this is a reference to
     the absolute section so that the reloc is ignored.  */
  if (intern->r_type == MIPS_R_IGNORE)
    rptr->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;

  rptr->howto = &mips_howto_table[intern->r_type];
}

/* Make any adjustments needed to a reloc before writing it out.  None
   are needed for MIPS.  */

static void
mips_adjust_reloc_in (abfd, rel, intern)
     bfd *abfd;
     const arelent *rel;
     struct internal_reloc *intern;
{
}

/* ECOFF relocs are either against external symbols, or against
   sections.  If we are producing relocateable output, and the reloc
   is against an external symbol, and nothing has given us any
   additional addend, the resulting reloc will also be against the
   same symbol.  In such a case, we don't want to change anything
   about the way the reloc is handled, since it will all be done at
   final link time.  Rather than put special case code into
   bfd_perform_relocation, all the reloc types use this howto
   function.  It just short circuits the reloc if producing
   relocateable output against an external symbol.  */

static bfd_reloc_status_type
mips_generic_reloc (abfd,
		    reloc_entry,
		    symbol,
		    data,
		    input_section,
		    output_bfd)
     bfd *abfd;
     arelent *reloc_entry;
     asymbol *symbol;
     PTR data;
     asection *input_section;
     bfd *output_bfd;
{
  if (output_bfd != (bfd *) NULL
      && (symbol->flags & BSF_SECTION_SYM) == 0
      && reloc_entry->addend == 0)
    {
      reloc_entry->address += input_section->output_offset;
      return bfd_reloc_ok;
    }

  return bfd_reloc_continue;
}

/* Do a REFHI relocation.  This has to be done in combination with a
   REFLO reloc, because there is a carry from the REFLO to the REFHI.
   Here we just save the information we need; we do the actual
   relocation when we see the REFLO.  MIPS ECOFF requires that the
   REFLO immediately follow the REFHI, so this ought to work.  */

static bfd_byte *mips_refhi_addr;
static bfd_vma mips_refhi_addend;

static bfd_reloc_status_type
mips_refhi_reloc (abfd,
		  reloc_entry,
		  symbol,
		  data,
		  input_section,
		  output_bfd)
     bfd *abfd;
     arelent *reloc_entry;
     asymbol *symbol;
     PTR data;
     asection *input_section;
     bfd *output_bfd;
{
  bfd_reloc_status_type ret;
  bfd_vma relocation;

  /* If we're relocating, and this an external symbol, we don't want
     to change anything.  */
  if (output_bfd != (bfd *) NULL
      && (symbol->flags & BSF_SECTION_SYM) == 0
      && reloc_entry->addend == 0)
    {
      reloc_entry->address += input_section->output_offset;
      return bfd_reloc_ok;
    }

  ret = bfd_reloc_ok;
  if (symbol->section == &bfd_und_section
      && output_bfd == (bfd *) NULL)
    ret = bfd_reloc_undefined;

  if (bfd_is_com_section (symbol->section))
    relocation = 0;
  else
    relocation = symbol->value;

  relocation += symbol->section->output_section->vma;
  relocation += symbol->section->output_offset;
  relocation += reloc_entry->addend;

  if (reloc_entry->address > input_section->_cooked_size)
    return bfd_reloc_outofrange;

  /* Save the information, and let REFLO do the actual relocation.  */
  mips_refhi_addr = (bfd_byte *) data + reloc_entry->address;
  mips_refhi_addend = relocation;

  if (output_bfd != (bfd *) NULL)
    reloc_entry->address += input_section->output_offset;

  return ret;
}

/* Do a REFLO relocation.  This is a straightforward 16 bit inplace
   relocation; this function exists in order to do the REFHI
   relocation described above.  */

static bfd_reloc_status_type
mips_reflo_reloc (abfd,
		  reloc_entry,
		  symbol,
		  data,
		  input_section,
		  output_bfd)
     bfd *abfd;
     arelent *reloc_entry;
     asymbol *symbol;
     PTR data;
     asection *input_section;
     bfd *output_bfd;
{
  if (mips_refhi_addr != (bfd_byte *) NULL)
    {
      unsigned long insn;
      unsigned long val;
      unsigned long vallo;

      /* Do the REFHI relocation.  Note that we actually don't need to
	 know anything about the REFLO itself, except where to find
	 the low 16 bits of the addend needed by the REFHI.  */
      insn = bfd_get_32 (abfd, mips_refhi_addr);
      vallo = (bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address)
	       & 0xffff);
      val = ((insn & 0xffff) << 16) + vallo;
      val += mips_refhi_addend;

      /* The low order 16 bits are always treated as a signed value.
	 Therefore, a negative value in the low order bits requires an
	 adjustment in the high order bits.  We need to make this
	 adjustment in two ways: once for the bits we took from the
	 data, and once for the bits we are putting back in to the
	 data.  */
      if ((vallo & 0x8000) != 0)
	val -= 0x10000;
      if ((val & 0x8000) != 0)
	val += 0x10000;

      insn = (insn &~ 0xffff) | ((val >> 16) & 0xffff);
      bfd_put_32 (abfd, insn, mips_refhi_addr);

      mips_refhi_addr = (bfd_byte *) NULL;
    }

  /* Now do the REFLO reloc in the usual way.  */
  return mips_generic_reloc (abfd, reloc_entry, symbol, data,
			      input_section, output_bfd);
}

/* Do a GPREL relocation.  This is a 16 bit value which must become
   the offset from the gp register.  */

static bfd_reloc_status_type
mips_gprel_reloc (abfd,
		   reloc_entry,
		   symbol,
		   data,
		   input_section,
		   output_bfd)
     bfd *abfd;
     arelent *reloc_entry;
     asymbol *symbol;
     PTR data;
     asection *input_section;
     bfd *output_bfd;
{
  boolean relocateable;
  bfd_vma relocation;
  unsigned long val;
  unsigned long insn;

  /* If we're relocating, and this is an external symbol with no
     addend, we don't want to change anything.  We will only have an
     addend if this is a newly created reloc, not read from an ECOFF
     file.  */
  if (output_bfd != (bfd *) NULL
      && (symbol->flags & BSF_SECTION_SYM) == 0
      && reloc_entry->addend == 0)
    {
      reloc_entry->address += input_section->output_offset;
      return bfd_reloc_ok;
    }

  if (output_bfd != (bfd *) NULL)
    relocateable = true;
  else
    {
      relocateable = false;
      output_bfd = symbol->section->output_section->owner;
    }

  if (symbol->section == &bfd_und_section
      && relocateable == false)
    return bfd_reloc_undefined;

  /* We have to figure out the gp value, so that we can adjust the
     symbol value correctly.  We look up the symbol _gp in the output
     BFD.  If we can't find it, we're stuck.  We cache it in the ECOFF
     target data.  We don't need to adjust the symbol value for an
     external symbol if we are producing relocateable output.  */
  if (ecoff_data (output_bfd)->gp == 0
      && (relocateable == false
	  || (symbol->flags & BSF_SECTION_SYM) != 0))
    {
      if (relocateable != false)
	{
	  /* Make up a value.  */
	  ecoff_data (output_bfd)->gp =
	    symbol->section->output_section->vma + 0x4000;
	}
      else
	{
	  unsigned int count;
	  asymbol **sym;
	  unsigned int i;

	  count = bfd_get_symcount (output_bfd);
	  sym = bfd_get_outsymbols (output_bfd);

	  if (sym == (asymbol **) NULL)
	    i = count;
	  else
	    {
	      for (i = 0; i < count; i++, sym++)
		{
		  register CONST char *name;

		  name = bfd_asymbol_name (*sym);
		  if (*name == '_' && strcmp (name, "_gp") == 0)
		    {
		      ecoff_data (output_bfd)->gp = bfd_asymbol_value (*sym);
		      break;
		    }
		}
	    }

	  if (i >= count)
	    {
	      /* Only get the error once.  */
	      ecoff_data (output_bfd)->gp = 4;
	      /* FIXME: How can we get the program name here?  */
	      fprintf (stderr,
		       "GP relative relocation when _gp not defined\n");
	      return bfd_reloc_dangerous;
	    }
	}
    }

  if (bfd_is_com_section (symbol->section))
    relocation = 0;
  else
    relocation = symbol->value;

  relocation += symbol->section->output_section->vma;
  relocation += symbol->section->output_offset;

  if (reloc_entry->address > input_section->_cooked_size)
    return bfd_reloc_outofrange;

  insn = bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address);

  /* Set val to the offset into the section or symbol.  */
  val = ((insn & 0xffff) + reloc_entry->addend) & 0xffff;
  if (val & 0x8000)
    val -= 0x10000;

  /* Adjust val for the final section location and GP value.  If we
     are producing relocateable output, we don't want to do this for
     an external symbol.  */
  if (relocateable == false
      || (symbol->flags & BSF_SECTION_SYM) != 0)
    val += relocation - ecoff_data (output_bfd)->gp;

  insn = (insn &~ 0xffff) | (val & 0xffff);
  bfd_put_32 (abfd, insn, (bfd_byte *) data + reloc_entry->address);

  if (relocateable != false)
    reloc_entry->address += input_section->output_offset;

  /* Make sure it fit in 16 bits.  */
  if (val >= 0x8000 && val < 0xffff8000)
    return bfd_reloc_outofrange;

  return bfd_reloc_ok;
}

/* Get the howto structure for a generic reloc type.  */

static CONST struct reloc_howto_struct *
mips_bfd_reloc_type_lookup (abfd, code)
     bfd *abfd;
     bfd_reloc_code_real_type code;
{
  int mips_type;

  switch (code)
    {
    case BFD_RELOC_16:
      mips_type = MIPS_R_REFHALF;
      break;
    case BFD_RELOC_32:
      mips_type = MIPS_R_REFWORD;
      break;
    case BFD_RELOC_MIPS_JMP:
      mips_type = MIPS_R_JMPADDR;
      break;
    case BFD_RELOC_HI16_S:
      mips_type = MIPS_R_REFHI;
      break;
    case BFD_RELOC_LO16:
      mips_type = MIPS_R_REFLO;
      break;
    case BFD_RELOC_MIPS_GPREL:
      mips_type = MIPS_R_GPREL;
      break;
    default:
      return (CONST struct reloc_howto_struct *) NULL;
    }

  return &mips_howto_table[mips_type];
}

#ifdef HOST_IRIX4

#include <core.out.h>

struct sgi_core_struct 
{
  int sig;
  char cmd[CORE_NAMESIZE];
};

#define core_hdr(bfd) ((bfd)->tdata.sgi_core_data)
#define core_signal(bfd) (core_hdr(bfd)->sig)
#define core_command(bfd) (core_hdr(bfd)->cmd)

static asection *
make_bfd_asection (abfd, name, flags, _raw_size, vma, filepos)
     bfd *abfd;
     CONST char *name;
     flagword flags;
     bfd_size_type _raw_size;
     bfd_vma vma;
     file_ptr filepos;
{
  asection *asect;

  asect = bfd_make_section (abfd, name);
  if (!asect)
    return NULL;

  asect->flags = flags;
  asect->_raw_size = _raw_size;
  asect->vma = vma;
  asect->filepos = filepos;
  asect->alignment_power = 4;

  return asect;
}

static bfd_target *
ecoff_core_file_p (abfd)
     bfd *abfd;
{
  int val;
  int i;
  char *secname;
  struct coreout coreout;
  struct idesc *idg, *idf, *ids;

  val = bfd_read ((PTR)&coreout, 1, sizeof coreout, abfd);
  if (val != sizeof coreout)
    return 0;

  if (coreout.c_magic != CORE_MAGIC
      || coreout.c_version != CORE_VERSION1)
    return 0;

  core_hdr (abfd) = (struct sgi_core_struct *) bfd_zalloc (abfd, sizeof (struct sgi_core_struct));
  if (!core_hdr (abfd))
    return NULL;

  strncpy (core_command (abfd), coreout.c_name, CORE_NAMESIZE);
  core_signal (abfd) = coreout.c_sigcause;

  bfd_seek (abfd, coreout.c_vmapoffset, SEEK_SET);

  for (i = 0; i < coreout.c_nvmap; i++)
    {
      struct vmap vmap;

      val = bfd_read ((PTR)&vmap, 1, sizeof vmap, abfd);
      if (val != sizeof vmap)
	break;

      switch (vmap.v_type)
	{
	case VDATA:
	  secname = ".data";
	  break;
	case VSTACK:
	  secname = ".stack";
	  break;
	default:
	  continue;
	}

      if (!make_bfd_asection (abfd, secname,
			      SEC_ALLOC+SEC_LOAD+SEC_HAS_CONTENTS,
			      vmap.v_len,
			      vmap.v_vaddr,
			      vmap.v_offset,
			      2))
	return NULL;
    }

  /* Make sure that the regs are contiguous within the core file. */

  idg = &coreout.c_idesc[I_GPREGS];
  idf = &coreout.c_idesc[I_FPREGS];
  ids = &coreout.c_idesc[I_SPECREGS];

  if (idg->i_offset + idg->i_len != idf->i_offset
      || idf->i_offset + idf->i_len != ids->i_offset)
    return 0;			/* Can't deal with non-contig regs */

  bfd_seek (abfd, idg->i_offset, SEEK_SET);

  make_bfd_asection (abfd, ".reg",
		     SEC_ALLOC+SEC_HAS_CONTENTS,
		     idg->i_len + idf->i_len + ids->i_len,
		     0,
		     idg->i_offset);

  /* OK, we believe you.  You're a core file (sure, sure).  */

  return abfd->xvec;
}

static char *
ecoff_core_file_failing_command (abfd)
     bfd *abfd;
{
  return core_command (abfd);
}

static int
ecoff_core_file_failing_signal (abfd)
     bfd *abfd;
{
  return core_signal (abfd);
}

static boolean
ecoff_core_file_matches_executable_p (core_bfd, exec_bfd)
     bfd *core_bfd, *exec_bfd;
{
  return true;			/* XXX - FIXME */
}
#else /* not def HOST_IRIX4 */
#define ecoff_core_file_p _bfd_dummy_target
#define ecoff_core_file_failing_command	_bfd_dummy_core_file_failing_command
#define ecoff_core_file_failing_signal _bfd_dummy_core_file_failing_signal
#define ecoff_core_file_matches_executable_p \
  _bfd_dummy_core_file_matches_executable_p
#endif

/* This is the ECOFF backend structure.  The backend field of the
   target vector points to this.  */

static const struct ecoff_backend_data mips_ecoff_backend_data =
{
  /* COFF backend structure.  */
  {
    (void (*) PARAMS ((bfd *,PTR,int,int,PTR))) bfd_void, /* aux_in */
    (void (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* sym_in */
    (void (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* lineno_in */
    (unsigned (*) PARAMS ((bfd *,PTR,int,int,PTR))) bfd_void, /* aux_out */
    (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* sym_out */
    (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* lineno_out */
    (unsigned (*) PARAMS ((bfd *,PTR,PTR))) bfd_void, /* reloc_out */
    mips_ecoff_swap_filehdr_out, mips_ecoff_swap_aouthdr_out,
    mips_ecoff_swap_scnhdr_out,
    FILHSZ, AOUTSZ, SCNHSZ, 0, 0, 0, true,
    mips_ecoff_swap_filehdr_in, mips_ecoff_swap_aouthdr_in,
    mips_ecoff_swap_scnhdr_in, mips_ecoff_bad_format_hook,
    ecoff_set_arch_mach_hook, ecoff_mkobject_hook,
    ecoff_styp_to_sec_flags, ecoff_make_section_hook, ecoff_set_alignment_hook,
    ecoff_slurp_symbol_table, NULL, NULL
  },
  /* Supported architecture.  */
  bfd_arch_mips,
  /* Symbol table magic number.  */
  magicSym,
  /* Initial portion of armap string.  */
  "__________",
  /* Alignment of debugging information.  E.g., 4.  */
  4,
  /* The page boundary used to align sections in a demand-paged
     executable file.  E.g., 0x1000.  */
  0x1000,
  /* True if the .rdata section is part of the text segment, as on the
     Alpha.  False if .rdata is part of the data segment, as on the
     MIPS.  */
  false,
  /* Bitsize of constructor entries.  */
  32,
  /* Reloc to use for constructor entries.  */
  &mips_howto_table[MIPS_R_REFWORD],
  /* Sizes of external symbolic information.  */
  sizeof (struct hdr_ext),
  sizeof (struct dnr_ext),
  sizeof (struct pdr_ext),
  sizeof (struct sym_ext),
  sizeof (struct opt_ext),
  sizeof (struct fdr_ext),
  sizeof (struct rfd_ext),
  sizeof (struct ext_ext),
  /* Functions to swap in external symbolic data.  */
  ecoff_swap_hdr_in,
  ecoff_swap_dnr_in,
  ecoff_swap_pdr_in,
  ecoff_swap_sym_in,
  ecoff_swap_opt_in,
  ecoff_swap_fdr_in,
  ecoff_swap_rfd_in,
  ecoff_swap_ext_in,
  /* Functions to swap out external symbolic data.  */
  ecoff_swap_hdr_out,
  ecoff_swap_dnr_out,
  ecoff_swap_pdr_out,
  ecoff_swap_sym_out,
  ecoff_swap_opt_out,
  ecoff_swap_fdr_out,
  ecoff_swap_rfd_out,
  ecoff_swap_ext_out,
  /* External reloc size.  */
  RELSZ,
  /* Reloc swapping functions.  */
  mips_ecoff_swap_reloc_in,
  mips_ecoff_swap_reloc_out,
  /* Backend reloc tweaking.  */
  mips_adjust_reloc_in,
  mips_adjust_reloc_out
};

/* Looking up a reloc type is MIPS specific.  */
#define ecoff_bfd_reloc_type_lookup mips_bfd_reloc_type_lookup

/* Getting relocated section contents is generic.  */
#define ecoff_bfd_get_relocated_section_contents \
  bfd_generic_get_relocated_section_contents

bfd_target ecoff_little_vec =
{
  "ecoff-littlemips",		/* name */
  bfd_target_ecoff_flavour,
  false,			/* data byte order is little */
  false,			/* header byte order is little */

  (HAS_RELOC | EXEC_P |		/* object flags */
   HAS_LINENO | HAS_DEBUG |
   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),

  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* sect
							    flags */
  0,				/* leading underscore */
  ' ',				/* ar_pad_char */
  15,				/* ar_max_namelen */
  4,				/* minimum alignment power */
  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */

  {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
     ecoff_archive_p, _bfd_dummy_target},
  {bfd_false, ecoff_mkobject,  /* bfd_set_format */
     _bfd_generic_mkarchive, bfd_false},
  {bfd_false, ecoff_write_object_contents, /* bfd_write_contents */
     _bfd_write_archive_contents, bfd_false},
  JUMP_TABLE (ecoff),
  (PTR) &mips_ecoff_backend_data
};

bfd_target ecoff_big_vec =
{
  "ecoff-bigmips",		/* name */
  bfd_target_ecoff_flavour,
  true,				/* data byte order is big */
  true,				/* header byte order is big */

  (HAS_RELOC | EXEC_P |		/* object flags */
   HAS_LINENO | HAS_DEBUG |
   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),

  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* sect flags */
  0,				/* leading underscore */
  ' ',				/* ar_pad_char */
  15,				/* ar_max_namelen */
  4,				/* minimum alignment power */
  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
 {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
    ecoff_archive_p, ecoff_core_file_p},
 {bfd_false, ecoff_mkobject, /* bfd_set_format */
    _bfd_generic_mkarchive, bfd_false},
 {bfd_false, ecoff_write_object_contents, /* bfd_write_contents */
    _bfd_write_archive_contents, bfd_false},
  JUMP_TABLE(ecoff),
  (PTR) &mips_ecoff_backend_data
  /* Note that there is another bfd_target just above this one.  If
     you are adding initializers here, you should be adding them there
     as well.  */
};