binutils-gdb/gdb/sparc-ravenscar-thread.c

195 lines
6.3 KiB
C
Raw Normal View History

/* Ravenscar SPARC target support.
Consistent use of (C) after "Copyright". While writing the previous patch, I noticed that we're not consistent with the (C) in the copyright header. The maintainers manual prefers having it, though also says it's optional. We have over 10x more files with (C) than without in gdb's code, so I spent a few minutes grepping and fixing. Funny enough, the testsuite has it backwards. I'll leave that for another time. gdb/ 2013-02-12 Pedro Alves <palves@redhat.com> * amd64-darwin-tdep.c: Add (C) after Copyright. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. * cli/cli-decode.h: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-dump.h: Ditto. * cli/cli-interp.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-script.h: Ditto. * cli/cli-setshow.c: Ditto. * cli/cli-setshow.h: Ditto. * cli/cli-utils.c: Ditto. * cli/cli-utils.h: Ditto. * config/alpha/nm-osf3.h: Ditto. * config/djgpp/djconfig.sh: Ditto. * config/i386/nm-fbsd.h: Ditto. * config/i386/nm-i386gnu.h: Ditto. * config/nm-linux.h: Ditto. * config/nm-nto.h: Ditto. * config/rs6000/nm-rs6000.h: Ditto. * config/sparc/nm-sol2.h: Ditto. * darwin-nat-info.c: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * gdb-demangle.h: Ditto. * i386-darwin-nat.c: Ditto. * i386-darwin-tdep.c: Ditto. * linux-fork.h: Ditto. * m32c-tdep.c: Ditto. * microblaze-linux-tdep.c: Ditto. * microblaze-rom.c: Ditto. * microblaze-tdep.c: Ditto. * microblaze-tdep.h: Ditto. * mips-linux-tdep.h: Ditto. * ppc-ravenscar-thread.c: Ditto. * ppc-ravenscar-thread.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * sparc-ravenscar-thread.c: Ditto. * sparc-ravenscar-thread.h: Ditto. * tilegx-linux-tdep.c: Ditto. * unwind_stop_reasons.def: Ditto. * windows-nat.h: Ditto. * xtensa-linux-tdep.c: Ditto. * xtensa-xtregs.c: Ditto. * regformats/regdat.sh: Ditto. * regformats/regdef.h: Ditto. gdb/gdbserver/ 2013-02-12 Pedro Alves <palves@redhat.com> * linux-xtensa-low.c: Ditto. * xtensa-xtregs.c: Ditto.
2013-02-13 03:03:57 +08:00
Copyright (C) 2004-2013 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdbcore.h"
#include "regcache.h"
#include "sparc-tdep.h"
#include "inferior.h"
#include "ravenscar-thread.h"
#include "sparc-ravenscar-thread.h"
static void sparc_ravenscar_fetch_registers (struct regcache *regcache,
int regnum);
static void sparc_ravenscar_store_registers (struct regcache *regcache,
int regnum);
static void sparc_ravenscar_prepare_to_store (struct regcache *regcache);
/* Register offsets from a referenced address (exempli gratia the
Thread_Descriptor). The referenced address depends on the register
number. The Thread_Descriptor layout and the stack layout are documented
in the GNAT sources, in sparc-bb.h. */
static const int sparc_register_offsets[] =
{
/* G0 - G7 */
-1, 0x24, 0x28, 0x2C, 0x30, 0x34, 0x38, 0x3C,
/* O0 - O7 */
0x00, 0x04, 0x08, 0x0C, 0x10, 0x14, 0x18, 0x1C,
/* L0 - L7 */
0x00, 0x04, 0x08, 0x0C, 0x10, 0x14, 0x18, 0x1C,
/* I0 - I7 */
0x20, 0x24, 0x28, 0x2C, 0x30, 0x34, 0x38, 0x3C,
/* F0 - F31 */
0x50, 0x54, 0x58, 0x5C, 0x60, 0x64, 0x68, 0x6C,
0x70, 0x74, 0x78, 0x7C, 0x80, 0x84, 0x88, 0x8C,
0x90, 0x94, 0x99, 0x9C, 0xA0, 0xA4, 0xA8, 0xAC,
0xB0, 0xB4, 0xBB, 0xBC, 0xC0, 0xC4, 0xC8, 0xCC,
/* Y PSR WIM TBR PC NPC FPSR CPSR */
0x40, 0x20, 0x44, -1, 0x1C, -1, 0x4C, -1
};
/* supply register REGNUM, which has been saved on REGISTER_ADDR, to the
regcache. */
static void
supply_register_at_address (struct regcache *regcache, int regnum,
CORE_ADDR register_addr)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int buf_size = register_size (gdbarch, regnum);
-Wpointer-sign: char -> gdb_byte. -Wpointer-sign catches all these cases across the codebase that should be using gdb_byte for raw target bytes. I think these are all obvious, hence I've collapsed into a single patch. gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * aarch64-tdep.c (aarch64_default_breakpoint): Change type to gdb_byte[]. (aarch64_breakpoint_from_pc): Change return type to gdb_byte *. * ada-lang.c (ada_value_assign): Use gdb_byte. * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[]. (alphanbsd_sigtramp_offset): Use gdb_byte. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint) (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint) (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint) (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[]. * arm-tdep.c (arm_stub_unwind_sniffer) (arm_displaced_init_closure): Use gdb_byte. (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint) (arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): Change type to gdb_byte[]. * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint, thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *. * arm-wince-tdep.c (arm_wince_le_breakpoint) (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[]. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint) (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint) (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[]. * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint) (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[]. * cris-tdep.c (push_stack_item, cris_push_dummy_call) (cris_store_return_value, cris_extract_return_value): Use gdb_byte. (constraint): Change type of parameter to char * from signed char*. Use gdb_byte. * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type of local buffer to gdb_byte *. * dwarf2read.c (read_index_from_section): Use gdb_byte. (create_dwp_hash_table): Change type of locals to gdb_byte *. (add_address_entry): Change type of local buffer to gdb_byte[]. * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr) (frv_push_dummy_call): Use gdb_byte. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code) (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide) (hppa_hpux_supply_save_state): Use gdb_byte. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_convert_code_addr_to_fptr): Use gdb_byte. * ia64-tdep.c (extract_bit_field, replace_bit_field) (slotN_contents, replace_slotN_contents): Change type of parameter to gdb_byte *. (fetch_instruction, ia64_pseudo_register_write) (ia64_register_to_value, ia64_value_to_register) (ia64_extract_return_value, ia64_store_return_value) (ia64_push_dummy_call): Use gdb_byte. * m32c-tdep.c (m32c_return_value): Remove cast. * m68hc11-tdep.c (m68hc11_pseudo_register_write) (m68hc11_push_dummy_call, m68hc11_store_return_value): Use gdb_byte. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte. * mn10300-tdep.c (mn10300_store_return_value) (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use gdb_byte. * moxie-tdep.c (moxie_process_readu): Use gdb_byte. (moxie_process_record): Remove casts. * ppc-ravenscar-thread.c (supply_register_at_address) (ppc_ravenscar_generic_store_registers): Use gdb_byte. * ravenscar-thread.c (get_running_thread_id): Use gdb_byte. * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte. * remote-mips.c (mips_xfer_memory): Use gdb_byte. * remote.c (compare_sections_command): Use gdb_byte. * score-tdep.c (score7_free_memblock): Change type of parameter to gdb_byte *. * sh-tdep.c (sh_justify_value_in_reg): Change return type to gdb_byte *. Use gdb_byte. (sh_push_dummy_call_fpu): Use gdb_byte. (sh_extract_return_value_nofpu, sh_extract_return_value_fpu) (sh_store_return_value_nofpu, sh_store_return_value_fpu) (sh_register_convert_to_virtual, sh_register_convert_to_raw): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte. * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte. (sh64_store_return_value, sh64_register_convert_to_virtual): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh64_pseudo_register_write): Use gdb_byte. * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'. * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte buffer. (irix_current_sos): Use gdb_byte. * solib-som.c (som_current_sos): Use gdb_byte. * sparc-ravenscar-thread.c (supply_register_at_address) (sparc_ravenscar_generic_store_registers): Use gdb_byte. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_get_overlay_table): Use gdb_byte. * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to 'gdb_byte *'. * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to 'gdb_byte *'. * tracepoint.c (tfile_fetch_registers): Use gdb_byte. * xstormy16-tdep.c (xstormy16_extract_return_value) (xstormy16_store_return_value): Change parameter type to 'gdb_byte *'. Adjust. (xstormy16_push_dummy_call): Use gdb_byte. * xtensa-tdep.c (xtensa_scan_prologue, call0_ret) (call0_analyze_prologue, execute_code): Use gdb_byte.
2013-04-19 23:09:46 +08:00
gdb_byte *buf;
-Wpointer-sign: char -> gdb_byte. -Wpointer-sign catches all these cases across the codebase that should be using gdb_byte for raw target bytes. I think these are all obvious, hence I've collapsed into a single patch. gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * aarch64-tdep.c (aarch64_default_breakpoint): Change type to gdb_byte[]. (aarch64_breakpoint_from_pc): Change return type to gdb_byte *. * ada-lang.c (ada_value_assign): Use gdb_byte. * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[]. (alphanbsd_sigtramp_offset): Use gdb_byte. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint) (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint) (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint) (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[]. * arm-tdep.c (arm_stub_unwind_sniffer) (arm_displaced_init_closure): Use gdb_byte. (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint) (arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): Change type to gdb_byte[]. * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint, thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *. * arm-wince-tdep.c (arm_wince_le_breakpoint) (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[]. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint) (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint) (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[]. * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint) (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[]. * cris-tdep.c (push_stack_item, cris_push_dummy_call) (cris_store_return_value, cris_extract_return_value): Use gdb_byte. (constraint): Change type of parameter to char * from signed char*. Use gdb_byte. * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type of local buffer to gdb_byte *. * dwarf2read.c (read_index_from_section): Use gdb_byte. (create_dwp_hash_table): Change type of locals to gdb_byte *. (add_address_entry): Change type of local buffer to gdb_byte[]. * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr) (frv_push_dummy_call): Use gdb_byte. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code) (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide) (hppa_hpux_supply_save_state): Use gdb_byte. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_convert_code_addr_to_fptr): Use gdb_byte. * ia64-tdep.c (extract_bit_field, replace_bit_field) (slotN_contents, replace_slotN_contents): Change type of parameter to gdb_byte *. (fetch_instruction, ia64_pseudo_register_write) (ia64_register_to_value, ia64_value_to_register) (ia64_extract_return_value, ia64_store_return_value) (ia64_push_dummy_call): Use gdb_byte. * m32c-tdep.c (m32c_return_value): Remove cast. * m68hc11-tdep.c (m68hc11_pseudo_register_write) (m68hc11_push_dummy_call, m68hc11_store_return_value): Use gdb_byte. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte. * mn10300-tdep.c (mn10300_store_return_value) (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use gdb_byte. * moxie-tdep.c (moxie_process_readu): Use gdb_byte. (moxie_process_record): Remove casts. * ppc-ravenscar-thread.c (supply_register_at_address) (ppc_ravenscar_generic_store_registers): Use gdb_byte. * ravenscar-thread.c (get_running_thread_id): Use gdb_byte. * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte. * remote-mips.c (mips_xfer_memory): Use gdb_byte. * remote.c (compare_sections_command): Use gdb_byte. * score-tdep.c (score7_free_memblock): Change type of parameter to gdb_byte *. * sh-tdep.c (sh_justify_value_in_reg): Change return type to gdb_byte *. Use gdb_byte. (sh_push_dummy_call_fpu): Use gdb_byte. (sh_extract_return_value_nofpu, sh_extract_return_value_fpu) (sh_store_return_value_nofpu, sh_store_return_value_fpu) (sh_register_convert_to_virtual, sh_register_convert_to_raw): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte. * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte. (sh64_store_return_value, sh64_register_convert_to_virtual): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh64_pseudo_register_write): Use gdb_byte. * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'. * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte buffer. (irix_current_sos): Use gdb_byte. * solib-som.c (som_current_sos): Use gdb_byte. * sparc-ravenscar-thread.c (supply_register_at_address) (sparc_ravenscar_generic_store_registers): Use gdb_byte. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_get_overlay_table): Use gdb_byte. * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to 'gdb_byte *'. * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to 'gdb_byte *'. * tracepoint.c (tfile_fetch_registers): Use gdb_byte. * xstormy16-tdep.c (xstormy16_extract_return_value) (xstormy16_store_return_value): Change parameter type to 'gdb_byte *'. Adjust. (xstormy16_push_dummy_call): Use gdb_byte. * xtensa-tdep.c (xtensa_scan_prologue, call0_ret) (call0_analyze_prologue, execute_code): Use gdb_byte.
2013-04-19 23:09:46 +08:00
buf = alloca (buf_size);
read_memory (register_addr, buf, buf_size);
regcache_raw_supply (regcache, regnum, buf);
}
/* Return true if, for a non-running thread, REGNUM has been saved on the
stack. */
static int
register_on_stack_p (int regnum)
{
return (regnum >= SPARC_L0_REGNUM && regnum <= SPARC_L7_REGNUM)
|| (regnum >= SPARC_I0_REGNUM && regnum <= SPARC_I7_REGNUM);
}
/* Return true if, for a non-running thread, REGNUM has been saved on the
Thread_Descriptor. */
static int
register_in_thread_descriptor_p (int regnum)
{
return (regnum >= SPARC_O0_REGNUM && regnum <= SPARC_O7_REGNUM)
|| (regnum == SPARC32_PSR_REGNUM)
|| (regnum >= SPARC_G1_REGNUM && regnum <= SPARC_G7_REGNUM)
|| (regnum == SPARC32_Y_REGNUM)
|| (regnum == SPARC32_WIM_REGNUM)
|| (regnum == SPARC32_FSR_REGNUM)
|| (regnum >= SPARC_F0_REGNUM && regnum <= SPARC_F0_REGNUM + 31)
|| (regnum == SPARC32_PC_REGNUM);
}
/* to_fetch_registers when inferior_ptid is different from the running
thread. */
static void
sparc_ravenscar_fetch_registers (struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
const int sp_regnum = gdbarch_sp_regnum (gdbarch);
const int num_regs = gdbarch_num_regs (gdbarch);
int current_regnum;
CORE_ADDR current_address;
CORE_ADDR thread_descriptor_address;
ULONGEST stack_address;
/* The tid is the thread_id field, which is a pointer to the thread. */
thread_descriptor_address = (CORE_ADDR) ptid_get_tid (inferior_ptid);
/* Read the saved SP in the context buffer. */
current_address = thread_descriptor_address
+ sparc_register_offsets [sp_regnum];
supply_register_at_address (regcache, sp_regnum, current_address);
regcache_cooked_read_unsigned (regcache, sp_regnum, &stack_address);
/* Read registers. */
for (current_regnum = 0; current_regnum < num_regs; current_regnum ++)
{
if (register_in_thread_descriptor_p (current_regnum))
{
current_address = thread_descriptor_address
+ sparc_register_offsets [current_regnum];
supply_register_at_address (regcache, current_regnum,
current_address);
}
else if (register_on_stack_p (current_regnum))
{
current_address = stack_address
+ sparc_register_offsets [current_regnum];
supply_register_at_address (regcache, current_regnum,
current_address);
}
}
}
/* to_prepare_to_store when inferior_ptid is different from the running
thread. */
static void
sparc_ravenscar_prepare_to_store (struct regcache *regcache)
{
/* Nothing to do. */
}
/* to_store_registers when inferior_ptid is different from the running
thread. */
static void
sparc_ravenscar_store_registers (struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int buf_size = register_size (gdbarch, regnum);
-Wpointer-sign: char -> gdb_byte. -Wpointer-sign catches all these cases across the codebase that should be using gdb_byte for raw target bytes. I think these are all obvious, hence I've collapsed into a single patch. gdb/ 2013-04-19 Pedro Alves <palves@redhat.com> * aarch64-tdep.c (aarch64_default_breakpoint): Change type to gdb_byte[]. (aarch64_breakpoint_from_pc): Change return type to gdb_byte *. * ada-lang.c (ada_value_assign): Use gdb_byte. * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[]. (alphanbsd_sigtramp_offset): Use gdb_byte. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint) (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint) (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint) (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[]. * arm-tdep.c (arm_stub_unwind_sniffer) (arm_displaced_init_closure): Use gdb_byte. (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint) (arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): Change type to gdb_byte[]. * arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint, thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *. * arm-wince-tdep.c (arm_wince_le_breakpoint) (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[]. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint) (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint) (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[]. * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint) (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[]. * cris-tdep.c (push_stack_item, cris_push_dummy_call) (cris_store_return_value, cris_extract_return_value): Use gdb_byte. (constraint): Change type of parameter to char * from signed char*. Use gdb_byte. * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type of local buffer to gdb_byte *. * dwarf2read.c (read_index_from_section): Use gdb_byte. (create_dwp_hash_table): Change type of locals to gdb_byte *. (add_address_entry): Change type of local buffer to gdb_byte[]. * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr) (frv_push_dummy_call): Use gdb_byte. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code) (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide) (hppa_hpux_supply_save_state): Use gdb_byte. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_convert_code_addr_to_fptr): Use gdb_byte. * ia64-tdep.c (extract_bit_field, replace_bit_field) (slotN_contents, replace_slotN_contents): Change type of parameter to gdb_byte *. (fetch_instruction, ia64_pseudo_register_write) (ia64_register_to_value, ia64_value_to_register) (ia64_extract_return_value, ia64_store_return_value) (ia64_push_dummy_call): Use gdb_byte. * m32c-tdep.c (m32c_return_value): Remove cast. * m68hc11-tdep.c (m68hc11_pseudo_register_write) (m68hc11_push_dummy_call, m68hc11_store_return_value): Use gdb_byte. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte. * mn10300-tdep.c (mn10300_store_return_value) (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use gdb_byte. * moxie-tdep.c (moxie_process_readu): Use gdb_byte. (moxie_process_record): Remove casts. * ppc-ravenscar-thread.c (supply_register_at_address) (ppc_ravenscar_generic_store_registers): Use gdb_byte. * ravenscar-thread.c (get_running_thread_id): Use gdb_byte. * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte. * remote-mips.c (mips_xfer_memory): Use gdb_byte. * remote.c (compare_sections_command): Use gdb_byte. * score-tdep.c (score7_free_memblock): Change type of parameter to gdb_byte *. * sh-tdep.c (sh_justify_value_in_reg): Change return type to gdb_byte *. Use gdb_byte. (sh_push_dummy_call_fpu): Use gdb_byte. (sh_extract_return_value_nofpu, sh_extract_return_value_fpu) (sh_store_return_value_nofpu, sh_store_return_value_fpu) (sh_register_convert_to_virtual, sh_register_convert_to_raw): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte. * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte. (sh64_store_return_value, sh64_register_convert_to_virtual): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh64_pseudo_register_write): Use gdb_byte. * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'. * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte buffer. (irix_current_sos): Use gdb_byte. * solib-som.c (som_current_sos): Use gdb_byte. * sparc-ravenscar-thread.c (supply_register_at_address) (sparc_ravenscar_generic_store_registers): Use gdb_byte. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_get_overlay_table): Use gdb_byte. * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to 'gdb_byte *'. * tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to 'gdb_byte *'. * tracepoint.c (tfile_fetch_registers): Use gdb_byte. * xstormy16-tdep.c (xstormy16_extract_return_value) (xstormy16_store_return_value): Change parameter type to 'gdb_byte *'. Adjust. (xstormy16_push_dummy_call): Use gdb_byte. * xtensa-tdep.c (xtensa_scan_prologue, call0_ret) (call0_analyze_prologue, execute_code): Use gdb_byte.
2013-04-19 23:09:46 +08:00
gdb_byte buf[buf_size];
ULONGEST register_address;
if (register_in_thread_descriptor_p (regnum))
register_address =
ptid_get_tid (inferior_ptid) + sparc_register_offsets [regnum];
else if (register_on_stack_p (regnum))
{
regcache_cooked_read_unsigned (regcache, SPARC_SP_REGNUM,
&register_address);
register_address += sparc_register_offsets [regnum];
}
else
return;
regcache_raw_collect (regcache, regnum, buf);
write_memory (register_address,
buf,
buf_size);
}
static struct ravenscar_arch_ops sparc_ravenscar_ops =
{
sparc_ravenscar_fetch_registers,
sparc_ravenscar_store_registers,
sparc_ravenscar_prepare_to_store
};
/* Register ravenscar_arch_ops in GDBARCH. */
void
register_sparc_ravenscar_ops (struct gdbarch *gdbarch)
{
set_gdbarch_ravenscar_ops (gdbarch, &sparc_ravenscar_ops);
}