binutils-gdb/include/opcode/msp430.h

201 lines
7.3 KiB
C
Raw Normal View History

2002-12-31 03:25:13 +08:00
/* Opcode table for the TI MSP430 microcontrollers
Copyright (C) 2002-2019 Free Software Foundation, Inc.
2002-12-31 03:25:13 +08:00
Contributed by Dmitry Diky <diwil@mail.ru>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
2010-04-15 18:26:09 +08:00
the Free Software Foundation; either version 3, or (at your option)
2002-12-31 03:25:13 +08:00
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
2010-04-15 18:26:09 +08:00
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
2002-12-31 03:25:13 +08:00
#ifndef __MSP430_H_
#define __MSP430_H_
struct msp430_operand_s
{
int ol; /* Operand length words. */
int am; /* Addr mode. */
int reg; /* Register. */
int mode; /* Operand mode. */
int vshift; /* Number of bytes to shift operand down. */
2002-12-31 03:25:13 +08:00
#define OP_REG 0
#define OP_EXP 1
#ifndef DASM_SECTION
expressionS exp;
#endif
};
/* Byte operation flag for all instructions. Also used as the
A/L bit in the extension word to indicate a 20-bit operation. */
#define BYTE_OPERATION (1 << 6)
/* Z/C bit in the extension word. If set the carry bit is ignored
for the duration of the operation, although it may be changed as
a result of the operation. */
#define IGNORE_CARRY_BIT (1 << 8)
2002-12-31 03:25:13 +08:00
struct msp430_opcode_s
{
Add const qualifiers at various places. opcodes * mcore-opc.h: Add const qualifiers. * microblaze-opc.h (struct op_code_struct): Likewise. * sh-opc.h: Likewise. * tic4x-dis.c (tic4x_print_indirect): Likewise. (tic4x_print_op): Likewise. include * opcode/dlx.h (struct dlx_opcode): Add const qualifiers. * opcode/h8300.h (struct h8_opcode): Likewise. * opcode/hppa.h (struct pa_opcode): Likewise. * opcode/msp430.h: Likewise. * opcode/spu.h (struct spu_opcode): Likewise. * opcode/tic30.h (struct _register): Likewise. * opcode/tic4x.h (struct tic4x_register): Likewise. (struct tic4x_cond): Likewise. (struct tic4x_indirect): Likewise. (struct tic4x_inst): Likewise. * opcode/visium.h (struct reg_entry): Likewise. gas * config/tc-arc.c: Add const qualifiers. * config/tc-h8300.c (md_begin): Likewise. * config/tc-ia64.c (print_prmask): Likewise. * config/tc-msp430.c (msp430_operands): Likewise. * config/tc-nds32.c (struct suffix_name): Likewise. (struct nds32_parse_option_table): Likewise. (struct nds32_set_option_table): Likewise. (do_pseudo_pushpopm): Likewise. (do_pseudo_pushpop_stack): Likewise. (nds32_relax_relocs): Likewise. (nds32_flag): Likewise. (struct nds32_hint_map): Likewise. (nds32_find_reloc_table): Likewise. (nds32_match_hint_insn): Likewise. * config/tc-s390.c: Likewise. * config/tc-sh.c (get_specific): Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic4x.c (tic4x_inst_add): Likewise. (tic4x_indirect_parse): Likewise. * config/tc-vax.c (vax_cons): Likewise. * config/tc-z80.c (struct reg_entry): Likewise. * config/tc-epiphany.c (md_assemble): Adjust. (epiphany_assemble): New function. (epiphany_elf_section_rtn): Call do_align directly. (epiphany_elf_section_text): Likewise. * config/tc-ip2k.c (ip2k_elf_section_rtn): Likewise. (ip2k_elf_section_text): Likewise. * read.c (do_align): Make it not static. * read.h (do_align): New prototype.
2016-03-07 23:16:28 +08:00
const char *name;
2002-12-31 03:25:13 +08:00
int fmt;
int insn_opnumb;
int bin_opcode;
int bin_mask;
};
#define MSP_INSN(name, fmt, numb, bin, mask) { #name, fmt, numb, bin, mask }
2002-12-31 03:25:13 +08:00
static struct msp430_opcode_s msp430_opcodes[] =
{
MSP_INSN (and, 1, 2, 0xf000, 0xf000),
MSP_INSN (inv, 0, 1, 0xe330, 0xfff0),
MSP_INSN (xor, 1, 2, 0xe000, 0xf000),
MSP_INSN (setz, 0, 0, 0xd322, 0xffff),
MSP_INSN (setc, 0, 0, 0xd312, 0xffff),
MSP_INSN (eint, 0, 0, 0xd232, 0xffff),
MSP_INSN (setn, 0, 0, 0xd222, 0xffff),
MSP_INSN (bis, 1, 2, 0xd000, 0xf000),
MSP_INSN (clrz, 0, 0, 0xc322, 0xffff),
MSP_INSN (clrc, 0, 0, 0xc312, 0xffff),
MSP_INSN (dint, 0, 0, 0xc232, 0xffff),
MSP_INSN (clrn, 0, 0, 0xc222, 0xffff),
MSP_INSN (bic, 1, 2, 0xc000, 0xf000),
MSP_INSN (bit, 1, 2, 0xb000, 0xf000),
MSP_INSN (dadc, 0, 1, 0xa300, 0xff30),
MSP_INSN (dadd, 1, 2, 0xa000, 0xf000),
MSP_INSN (tst, 0, 1, 0x9300, 0xff30),
MSP_INSN (cmp, 1, 2, 0x9000, 0xf000),
MSP_INSN (decd, 0, 1, 0x8320, 0xff30),
MSP_INSN (dec, 0, 1, 0x8310, 0xff30),
MSP_INSN (sub, 1, 2, 0x8000, 0xf000),
MSP_INSN (sbc, 0, 1, 0x7300, 0xff30),
MSP_INSN (subc, 1, 2, 0x7000, 0xf000),
MSP_INSN (adc, 0, 1, 0x6300, 0xff30),
MSP_INSN (rlc, 0, 2, 0x6000, 0xf000),
MSP_INSN (addc, 1, 2, 0x6000, 0xf000),
MSP_INSN (incd, 0, 1, 0x5320, 0xff30),
MSP_INSN (inc, 0, 1, 0x5310, 0xff30),
MSP_INSN (rla, 0, 2, 0x5000, 0xf000),
MSP_INSN (add, 1, 2, 0x5000, 0xf000),
MSP_INSN (nop, 0, 0, 0x4303, 0xffff),
MSP_INSN (clr, 0, 1, 0x4300, 0xff30),
MSP_INSN (ret, 0, 0, 0x4130, 0xff30),
MSP_INSN (pop, 0, 1, 0x4130, 0xff30),
MSP_INSN (br, 0, 3, 0x4000, 0xf000),
MSP_INSN (mov, 1, 2, 0x4000, 0xf000),
MSP_INSN (jmp, 3, 1, 0x3c00, 0xfc00),
MSP_INSN (jl, 3, 1, 0x3800, 0xfc00),
MSP_INSN (jge, 3, 1, 0x3400, 0xfc00),
MSP_INSN (jn, 3, 1, 0x3000, 0xfc00),
MSP_INSN (jc, 3, 1, 0x2c00, 0xfc00),
MSP_INSN (jhs, 3, 1, 0x2c00, 0xfc00),
MSP_INSN (jnc, 3, 1, 0x2800, 0xfc00),
MSP_INSN (jlo, 3, 1, 0x2800, 0xfc00),
MSP_INSN (jz, 3, 1, 0x2400, 0xfc00),
MSP_INSN (jeq, 3, 1, 0x2400, 0xfc00),
MSP_INSN (jnz, 3, 1, 0x2000, 0xfc00),
MSP_INSN (jne, 3, 1, 0x2000, 0xfc00),
MSP_INSN (reti, 2, 0, 0x1300, 0xffc0),
MSP_INSN (call, 2, 1, 0x1280, 0xffc0),
MSP_INSN (push, 2, 1, 0x1200, 0xff80),
MSP_INSN (sxt, 2, 1, 0x1180, 0xffc0),
MSP_INSN (rra, 2, 1, 0x1100, 0xff80),
MSP_INSN (swpb, 2, 1, 0x1080, 0xffc0),
MSP_INSN (rrc, 2, 1, 0x1000, 0xff80),
/* Simple polymorphs. */
MSP_INSN (beq, 4, 0, 0, 0xffff),
MSP_INSN (bne, 4, 1, 0, 0xffff),
MSP_INSN (blt, 4, 2, 0, 0xffff),
MSP_INSN (bltu, 4, 3, 0, 0xffff),
MSP_INSN (bge, 4, 4, 0, 0xffff),
MSP_INSN (bgeu, 4, 5, 0, 0xffff),
MSP_INSN (bltn, 4, 6, 0, 0xffff),
MSP_INSN (jump, 4, 7, 0, 0xffff),
/* Long polymorphs. */
MSP_INSN (bgt, 5, 0, 0, 0xffff),
MSP_INSN (bgtu, 5, 1, 0, 0xffff),
MSP_INSN (bleu, 5, 2, 0, 0xffff),
MSP_INSN (ble, 5, 3, 0, 0xffff),
2002-12-31 03:25:13 +08:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-03 05:06:15 +08:00
/* MSP430X instructions - these ones use an extension word.
A negative format indicates an MSP430X instruction. */
MSP_INSN (addcx, -2, 2, 0x6000, 0xf000),
MSP_INSN (addx, -2, 2, 0x5000, 0xf000),
MSP_INSN (andx, -2, 2, 0xf000, 0xf000),
MSP_INSN (bicx, -2, 2, 0xc000, 0xf000),
MSP_INSN (bisx, -2, 2, 0xd000, 0xf000),
MSP_INSN (bitx, -2, 2, 0xb000, 0xf000),
MSP_INSN (cmpx, -2, 2, 0x9000, 0xf000),
MSP_INSN (daddx, -2, 2, 0xa000, 0xf000),
MSP_INSN (movx, -2, 2, 0x4000, 0xf000),
MSP_INSN (subcx, -2, 2, 0x7000, 0xf000),
MSP_INSN (subx, -2, 2, 0x8000, 0xf000),
MSP_INSN (xorx, -2, 2, 0xe000, 0xf000),
/* MSP430X Synthetic instructions. */
MSP_INSN (adcx, -1, 1, 0x6300, 0xff30),
MSP_INSN (clra, -1, 1, 0x4300, 0xff30),
MSP_INSN (clrx, -1, 1, 0x4300, 0xff30),
MSP_INSN (dadcx, -1, 1, 0xa300, 0xff30),
MSP_INSN (decx, -1, 1, 0x8310, 0xff30),
MSP_INSN (decda, -1, 1, 0x8320, 0xff30),
MSP_INSN (decdx, -1, 1, 0x8320, 0xff30),
MSP_INSN (incx, -1, 1, 0x5310, 0xff30),
MSP_INSN (incda, -1, 1, 0x5320, 0xff30),
MSP_INSN (incdx, -1, 1, 0x5320, 0xff30),
MSP_INSN (invx, -1, 1, 0xe330, 0xfff0),
MSP_INSN (popx, -1, 1, 0x4130, 0xff30),
MSP_INSN (rlax, -1, 2, 0x5000, 0xf000),
MSP_INSN (rlcx, -1, 2, 0x6000, 0xf000),
MSP_INSN (sbcx, -1, 1, 0x7300, 0xff30),
MSP_INSN (tsta, -1, 1, 0x9300, 0xff30),
MSP_INSN (tstx, -1, 1, 0x9300, 0xff30),
MSP_INSN (pushx, -3, 1, 0x1200, 0xff80),
MSP_INSN (rrax, -3, 1, 0x1100, 0xff80),
MSP_INSN (rrcx, -3, 1, 0x1000, 0xff80), /* Synthesised as RRC but with the Z/C bit clear. */
MSP_INSN (rrux, -3, 1, 0x1000, 0xff80), /* Synthesised as RRC but with the Z/C bit set. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-03 05:06:15 +08:00
MSP_INSN (swpbx, -3, 1, 0x1080, 0xffc0),
MSP_INSN (sxtx, -3, 1, 0x1180, 0xffc0),
/* MSP430X Address instructions - no extension word needed.
The insn_opnumb field is used to encode the nature of the
instruction for assembly and disassembly purposes. */
MSP_INSN (calla, -1, 4, 0x1300, 0xff00),
MSP_INSN (popm, -1, 5, 0x1600, 0xfe00),
MSP_INSN (pushm, -1, 5, 0x1400, 0xfe00),
MSP_INSN (rrcm, -1, 6, 0x0040, 0xf3e0),
MSP_INSN (rram, -1, 6, 0x0140, 0xf3e0),
MSP_INSN (rlam, -1, 6, 0x0240, 0xf3e0),
MSP_INSN (rrum, -1, 6, 0x0340, 0xf3e0),
MSP_INSN (adda, -1, 8, 0x00a0, 0xf0b0),
MSP_INSN (cmpa, -1, 8, 0x0090, 0xf0b0),
MSP_INSN (suba, -1, 8, 0x00b0, 0xf0b0),
MSP_INSN (reta, -1, 9, 0x0110, 0xffff),
MSP_INSN (bra, -1, 9, 0x0000, 0xf0cf),
MSP_INSN (mova, -1, 9, 0x0000, 0xf080),
MSP_INSN (mova, -1, 9, 0x0080, 0xf0b0),
MSP_INSN (mova, -1, 9, 0x00c0, 0xf0f0),
/* Pseudo instruction to set the repeat field in the extension word. */
MSP_INSN (rpt, -1, 10, 0x0000, 0x0000),
2002-12-31 03:25:13 +08:00
/* End of instruction set. */
{ NULL, 0, 0, 0, 0 }
};
#endif