binutils-gdb/gdb/osfsolib.c

974 lines
26 KiB
C
Raw Normal View History

Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* Handle OSF/1 shared libraries for GDB, the GNU Debugger.
Copyright 1993, 1994, 1995, 1996 Free Software Foundation, Inc.
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
1995-08-02 11:41:12 +08:00
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* FIXME: Most of this code could be merged with solib.c by using
next_link_map_member and xfer_link_map_member in solib.c. */
#include "defs.h"
#include <sys/types.h>
#include <signal.h>
* configure.in: Check for working mmap, ansi headers, string.h, strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-08-02 04:14:27 +08:00
#include "gdb_string.h"
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#include <fcntl.h>
#include "symtab.h"
#include "bfd.h"
#include "symfile.h"
#include "objfiles.h"
#include "gdbcore.h"
#include "command.h"
#include "target.h"
#include "frame.h"
#include "gnu-regex.h"
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#include "inferior.h"
#include "language.h"
#include "gdbcmd.h"
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#define MAX_PATH_SIZE 1024 /* FIXME: Should be dynamic */
/* When handling shared libraries, GDB has to find out the pathnames
of all shared libraries that are currently loaded (to read in their
symbols) and where the shared libraries are loaded in memory
(to relocate them properly from their prelinked addresses to the
current load address).
Under OSF/1 there are two possibilities to get at this information:
1) Peek around in the runtime loader structures.
These are not documented, and they are not defined in the system
header files. The definitions below were obtained by experimentation,
but they seem stable enough.
2) Use the undocumented libxproc.a library, which contains the
equivalent ldr_* routines.
This approach is somewhat cleaner, but it requires that the GDB
executable is dynamically linked. In addition it requires a
NAT_CLIBS= -lxproc -Wl,-expect_unresolved,ldr_process_context
linker specification for GDB and all applications that are using
libgdb.
We will use the peeking approach until it becomes unwieldy. */
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#ifndef USE_LDR_ROUTINES
/* Definition of runtime loader structures, found by experimentation. */
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#define RLD_CONTEXT_ADDRESS 0x3ffc0000000
typedef struct
{
CORE_ADDR next;
CORE_ADDR previous;
CORE_ADDR unknown1;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
char *module_name;
CORE_ADDR modinfo_addr;
long module_id;
CORE_ADDR unknown2;
CORE_ADDR unknown3;
long region_count;
CORE_ADDR regioninfo_addr;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
} ldr_module_info_t;
typedef struct
{
long unknown1;
CORE_ADDR regionname_addr;
long protection;
CORE_ADDR vaddr;
CORE_ADDR mapaddr;
long size;
long unknown2[5];
} ldr_region_info_t;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
typedef struct
{
CORE_ADDR unknown1;
CORE_ADDR unknown2;
CORE_ADDR head;
CORE_ADDR tail;
} ldr_context_t;
static ldr_context_t ldr_context;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#else
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#include <loader.h>
static ldr_process_t fake_ldr_process;
/* Called by ldr_* routines to read memory from the current target. */
static int ldr_read_memory PARAMS ((CORE_ADDR, char *, int, int));
static int
ldr_read_memory (memaddr, myaddr, len, readstring)
CORE_ADDR memaddr;
char *myaddr;
int len;
int readstring;
{
int result;
char *buffer;
if (readstring)
{
target_read_string (memaddr, &buffer, len, &result);
if (result == 0)
strcpy (myaddr, buffer);
free (buffer);
}
else
result = target_read_memory (memaddr, myaddr, len);
if (result != 0)
result = -result;
return result;
}
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#endif
/* Define our own link_map structure.
This will help to share code with solib.c. */
struct link_map {
CORE_ADDR l_offset; /* prelink to load address offset */
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
char *l_name; /* full name of loaded object */
ldr_module_info_t module_info; /* corresponding module info */
};
#define LM_OFFSET(so) ((so) -> lm.l_offset)
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#define LM_NAME(so) ((so) -> lm.l_name)
struct so_list {
struct so_list *next; /* next structure in linked list */
struct link_map lm; /* copy of link map from inferior */
struct link_map *lmaddr; /* addr in inferior lm was read from */
CORE_ADDR lmend; /* upper addr bound of mapped object */
char so_name[MAX_PATH_SIZE]; /* shared object lib name (FIXME) */
char symbols_loaded; /* flag: symbols read in yet? */
char from_tty; /* flag: print msgs? */
struct objfile *objfile; /* objfile for loaded lib */
struct section_table *sections;
struct section_table *sections_end;
struct section_table *textsection;
bfd *abfd;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
};
static struct so_list *so_list_head; /* List of known shared objects */
extern int
fdmatch PARAMS ((int, int)); /* In libiberty */
/* Local function prototypes */
static void
sharedlibrary_command PARAMS ((char *, int));
static void
info_sharedlibrary_command PARAMS ((char *, int));
static int
symbol_add_stub PARAMS ((char *));
static struct so_list *
find_solib PARAMS ((struct so_list *));
static struct link_map *
first_link_map_member PARAMS ((void));
static struct link_map *
next_link_map_member PARAMS ((struct so_list *));
static void
xfer_link_map_member PARAMS ((struct so_list *, struct link_map *));
static void
solib_map_sections PARAMS ((struct so_list *));
/*
LOCAL FUNCTION
solib_map_sections -- open bfd and build sections for shared lib
SYNOPSIS
static void solib_map_sections (struct so_list *so)
DESCRIPTION
Given a pointer to one of the shared objects in our list
of mapped objects, use the recorded name to open a bfd
descriptor for the object, build a section table, and then
relocate all the section addresses by the base address at
which the shared object was mapped.
FIXMES
In most (all?) cases the shared object file name recorded in the
dynamic linkage tables will be a fully qualified pathname. For
cases where it isn't, do we really mimic the systems search
mechanism correctly in the below code (particularly the tilde
expansion stuff?).
*/
static void
solib_map_sections (so)
struct so_list *so;
{
char *filename;
char *scratch_pathname;
int scratch_chan;
struct section_table *p;
struct cleanup *old_chain;
bfd *abfd;
filename = tilde_expand (so -> so_name);
old_chain = make_cleanup (free, filename);
scratch_chan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
&scratch_pathname);
if (scratch_chan < 0)
{
scratch_chan = openp (getenv ("LD_LIBRARY_PATH"), 1, filename,
O_RDONLY, 0, &scratch_pathname);
}
if (scratch_chan < 0)
{
perror_with_name (filename);
}
/* Leave scratch_pathname allocated. bfd->name will point to it. */
abfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan);
if (!abfd)
{
close (scratch_chan);
error ("Could not open `%s' as an executable file: %s",
scratch_pathname, bfd_errmsg (bfd_get_error ()));
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
/* Leave bfd open, core_xfer_memory and "info files" need it. */
so -> abfd = abfd;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
abfd -> cacheable = true;
if (!bfd_check_format (abfd, bfd_object))
{
error ("\"%s\": not in executable format: %s.",
scratch_pathname, bfd_errmsg (bfd_get_error ()));
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
if (build_section_table (abfd, &so -> sections, &so -> sections_end))
{
error ("Can't find the file sections in `%s': %s",
bfd_get_filename (exec_bfd), bfd_errmsg (bfd_get_error ()));
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
for (p = so -> sections; p < so -> sections_end; p++)
{
/* Relocate the section binding addresses as recorded in the shared
object's file by the offset to get the address to which the
object was actually mapped. */
p -> addr += LM_OFFSET (so);
p -> endaddr += LM_OFFSET (so);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
so -> lmend = (CORE_ADDR) max (p -> endaddr, so -> lmend);
if (STREQ (p -> the_bfd_section -> name, ".text"))
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
{
so -> textsection = p;
}
}
/* Free the file names, close the file now. */
do_cleanups (old_chain);
}
/*
LOCAL FUNCTION
first_link_map_member -- locate first member in dynamic linker's map
SYNOPSIS
static struct link_map *first_link_map_member (void)
DESCRIPTION
Read in a copy of the first member in the inferior's dynamic
link map from the inferior's dynamic linker structures, and return
a pointer to the copy in our address space.
*/
static struct link_map *
first_link_map_member ()
{
struct link_map *lm = NULL;
static struct link_map first_lm;
#ifdef USE_LDR_ROUTINES
ldr_module_t mod_id = LDR_NULL_MODULE;
size_t retsize;
fake_ldr_process = ldr_core_process ();
ldr_set_core_reader (ldr_read_memory);
ldr_xdetach (fake_ldr_process);
if (ldr_xattach (fake_ldr_process) != 0
|| ldr_next_module(fake_ldr_process, &mod_id) != 0
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
|| mod_id == LDR_NULL_MODULE
|| ldr_inq_module(fake_ldr_process, mod_id,
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
&first_lm.module_info, sizeof(ldr_module_info_t),
&retsize) != 0)
return lm;
#else
CORE_ADDR ldr_context_addr;
if (target_read_memory ((CORE_ADDR) RLD_CONTEXT_ADDRESS,
(char *) &ldr_context_addr,
sizeof (CORE_ADDR)) != 0
|| target_read_memory (ldr_context_addr,
(char *) &ldr_context,
sizeof (ldr_context_t)) != 0
|| target_read_memory ((CORE_ADDR) ldr_context.head,
(char *) &first_lm.module_info,
sizeof (ldr_module_info_t)) != 0)
return lm;
#endif
lm = &first_lm;
/* The first entry is for the main program and should be skipped. */
lm->l_name = NULL;
return lm;
}
static struct link_map *
next_link_map_member (so_list_ptr)
struct so_list *so_list_ptr;
{
struct link_map *lm = NULL;
static struct link_map next_lm;
#ifdef USE_LDR_ROUTINES
ldr_module_t mod_id = so_list_ptr->lm.module_info.lmi_modid;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
size_t retsize;
if (ldr_next_module(fake_ldr_process, &mod_id) != 0
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
|| mod_id == LDR_NULL_MODULE
|| ldr_inq_module(fake_ldr_process, mod_id,
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
&next_lm.module_info, sizeof(ldr_module_info_t),
&retsize) != 0)
return lm;
lm = &next_lm;
lm->l_name = lm->module_info.lmi_name;
#else
CORE_ADDR ldr_context_addr;
/* Reread context in case ldr_context.tail was updated. */
if (target_read_memory ((CORE_ADDR) RLD_CONTEXT_ADDRESS,
(char *) &ldr_context_addr,
sizeof (CORE_ADDR)) != 0
|| target_read_memory (ldr_context_addr,
(char *) &ldr_context,
sizeof (ldr_context_t)) != 0
|| so_list_ptr->lm.module_info.modinfo_addr == ldr_context.tail
|| target_read_memory (so_list_ptr->lm.module_info.next,
(char *) &next_lm.module_info,
sizeof (ldr_module_info_t)) != 0)
return lm;
lm = &next_lm;
lm->l_name = lm->module_info.module_name;
#endif
return lm;
}
static void
xfer_link_map_member (so_list_ptr, lm)
struct so_list *so_list_ptr;
struct link_map *lm;
{
int i;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
so_list_ptr->lm = *lm;
/* OSF/1 shared libraries are pre-linked to particular addresses,
but the runtime loader may have to relocate them if the
address ranges of the libraries used by the target executable clash,
or if the target executable is linked with the -taso option.
The offset is the difference between the address where the shared
library is mapped and the pre-linked address of the shared library.
FIXME: GDB is currently unable to relocate the shared library
sections by different offsets. If sections are relocated by
different offsets, put out a warning and use the offset of the
first section for all remaining sections. */
LM_OFFSET (so_list_ptr) = 0;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* There is one entry that has no name (for the inferior executable)
since it is not a shared object. */
if (LM_NAME (so_list_ptr) != 0)
{
#ifdef USE_LDR_ROUTINES
int len = strlen (LM_NAME (so_list_ptr) + 1);
if (len > MAX_PATH_SIZE)
len = MAX_PATH_SIZE;
strncpy (so_list_ptr->so_name, LM_NAME (so_list_ptr), MAX_PATH_SIZE);
so_list_ptr->so_name[MAX_PATH_SIZE - 1] = '\0';
for (i = 0; i < lm->module_info.lmi_nregion; i++)
{
ldr_region_info_t region_info;
size_t retsize;
CORE_ADDR region_offset;
if (ldr_inq_region (fake_ldr_process, lm->module_info.lmi_modid,
i, &region_info, sizeof (region_info),
&retsize) != 0)
break;
region_offset = (CORE_ADDR) region_info.lri_mapaddr
- (CORE_ADDR) region_info.lri_vaddr;
if (i == 0)
LM_OFFSET (so_list_ptr) = region_offset;
else if (LM_OFFSET (so_list_ptr) != region_offset)
warning ("cannot handle shared library relocation for %s (%s)",
so_list_ptr->so_name, region_info.lri_name);
}
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
#else
int errcode;
char *buffer;
target_read_string ((CORE_ADDR) LM_NAME (so_list_ptr), &buffer,
MAX_PATH_SIZE - 1, &errcode);
if (errcode != 0)
error ("xfer_link_map_member: Can't read pathname for load map: %s\n",
safe_strerror (errcode));
strncpy (so_list_ptr->so_name, buffer, MAX_PATH_SIZE - 1);
free (buffer);
so_list_ptr->so_name[MAX_PATH_SIZE - 1] = '\0';
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
for (i = 0; i < lm->module_info.region_count; i++)
{
ldr_region_info_t region_info;
CORE_ADDR region_offset;
if (target_read_memory (lm->module_info.regioninfo_addr
+ i * sizeof (region_info),
(char *) &region_info,
sizeof (region_info)) != 0)
break;
region_offset = region_info.mapaddr - region_info.vaddr;
if (i == 0)
LM_OFFSET (so_list_ptr) = region_offset;
else if (LM_OFFSET (so_list_ptr) != region_offset)
{
char *region_name;
target_read_string (region_info.regionname_addr, &buffer,
MAX_PATH_SIZE - 1, &errcode);
if (errcode == 0)
region_name = buffer;
else
region_name = "??";
warning ("cannot handle shared library relocation for %s (%s)",
so_list_ptr->so_name, region_name);
free (buffer);
}
}
#endif
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
solib_map_sections (so_list_ptr);
}
}
/*
LOCAL FUNCTION
find_solib -- step through list of shared objects
SYNOPSIS
struct so_list *find_solib (struct so_list *so_list_ptr)
DESCRIPTION
This module contains the routine which finds the names of any
loaded "images" in the current process. The argument in must be
NULL on the first call, and then the returned value must be passed
in on subsequent calls. This provides the capability to "step" down
the list of loaded objects. On the last object, a NULL value is
returned.
The arg and return value are "struct link_map" pointers, as defined
in <link.h>.
*/
static struct so_list *
find_solib (so_list_ptr)
struct so_list *so_list_ptr; /* Last lm or NULL for first one */
{
struct so_list *so_list_next = NULL;
struct link_map *lm = NULL;
struct so_list *new;
if (so_list_ptr == NULL)
{
/* We are setting up for a new scan through the loaded images. */
if ((so_list_next = so_list_head) == NULL)
{
/* Find the first link map list member. */
lm = first_link_map_member ();
}
}
else
{
/* We have been called before, and are in the process of walking
the shared library list. Advance to the next shared object. */
lm = next_link_map_member (so_list_ptr);
so_list_next = so_list_ptr -> next;
}
if ((so_list_next == NULL) && (lm != NULL))
{
/* Get next link map structure from inferior image and build a local
abbreviated load_map structure */
new = (struct so_list *) xmalloc (sizeof (struct so_list));
memset ((char *) new, 0, sizeof (struct so_list));
new -> lmaddr = lm;
/* Add the new node as the next node in the list, or as the root
node if this is the first one. */
if (so_list_ptr != NULL)
{
so_list_ptr -> next = new;
}
else
{
so_list_head = new;
}
so_list_next = new;
xfer_link_map_member (new, lm);
}
return (so_list_next);
}
/* A small stub to get us past the arg-passing pinhole of catch_errors. */
static int
symbol_add_stub (arg)
char *arg;
{
register struct so_list *so = (struct so_list *) arg; /* catch_errs bogon */
CORE_ADDR text_addr = 0;
if (so -> textsection)
text_addr = so -> textsection -> addr;
else
{
asection *lowest_sect;
/* If we didn't find a mapped non zero sized .text section, set up
text_addr so that the relocation in symbol_file_add does no harm. */
lowest_sect = bfd_get_section_by_name (so -> abfd, ".text");
if (lowest_sect == NULL)
bfd_map_over_sections (so -> abfd, find_lowest_section,
(PTR) &lowest_sect);
if (lowest_sect)
text_addr = bfd_section_vma (so -> abfd, lowest_sect) + LM_OFFSET (so);
}
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
so -> objfile = symbol_file_add (so -> so_name, so -> from_tty,
text_addr,
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
0, 0, 0);
return (1);
}
/*
GLOBAL FUNCTION
solib_add -- add a shared library file to the symtab and section list
SYNOPSIS
void solib_add (char *arg_string, int from_tty,
struct target_ops *target)
DESCRIPTION
*/
void
solib_add (arg_string, from_tty, target)
char *arg_string;
int from_tty;
struct target_ops *target;
{
register struct so_list *so = NULL; /* link map state variable */
/* Last shared library that we read. */
struct so_list *so_last = NULL;
char *re_err;
int count;
int old;
if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
{
error ("Invalid regexp: %s", re_err);
}
/* Add the shared library sections to the section table of the
specified target, if any. */
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
if (target)
{
/* Count how many new section_table entries there are. */
so = NULL;
count = 0;
while ((so = find_solib (so)) != NULL)
{
if (so -> so_name[0])
{
count += so -> sections_end - so -> sections;
}
}
if (count)
{
int update_coreops;
/* We must update the to_sections field in the core_ops structure
here, otherwise we dereference a potential dangling pointer
for each call to target_read/write_memory within this routine. */
update_coreops = core_ops.to_sections == target->to_sections;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* Reallocate the target's section table including the new size. */
if (target -> to_sections)
{
old = target -> to_sections_end - target -> to_sections;
target -> to_sections = (struct section_table *)
xrealloc ((char *)target -> to_sections,
(sizeof (struct section_table)) * (count + old));
}
else
{
old = 0;
target -> to_sections = (struct section_table *)
xmalloc ((sizeof (struct section_table)) * count);
}
target -> to_sections_end = target -> to_sections + (count + old);
/* Update the to_sections field in the core_ops structure
if needed. */
if (update_coreops)
{
core_ops.to_sections = target->to_sections;
core_ops.to_sections_end = target->to_sections_end;
}
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* Add these section table entries to the target's table. */
while ((so = find_solib (so)) != NULL)
{
if (so -> so_name[0])
{
count = so -> sections_end - so -> sections;
memcpy ((char *) (target -> to_sections + old),
so -> sections,
(sizeof (struct section_table)) * count);
old += count;
}
}
}
}
/* Now add the symbol files. */
so = NULL;
while ((so = find_solib (so)) != NULL)
{
if (so -> so_name[0] && re_exec (so -> so_name))
{
so -> from_tty = from_tty;
if (so -> symbols_loaded)
{
if (from_tty)
{
printf_unfiltered ("Symbols already loaded for %s\n", so -> so_name);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
}
else if (catch_errors
(symbol_add_stub, (char *) so,
"Error while reading shared library symbols:\n",
RETURN_MASK_ALL))
{
so_last = so;
so -> symbols_loaded = 1;
}
}
}
/* Getting new symbols may change our opinion about what is
frameless. */
if (so_last)
reinit_frame_cache ();
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
/*
LOCAL FUNCTION
info_sharedlibrary_command -- code for "info sharedlibrary"
SYNOPSIS
static void info_sharedlibrary_command ()
DESCRIPTION
Walk through the shared library list and print information
about each attached library.
*/
static void
info_sharedlibrary_command (ignore, from_tty)
char *ignore;
int from_tty;
{
register struct so_list *so = NULL; /* link map state variable */
int header_done = 0;
if (exec_bfd == NULL)
{
printf_unfiltered ("No exec file.\n");
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
return;
}
while ((so = find_solib (so)) != NULL)
{
if (so -> so_name[0])
{
unsigned long txt_start = 0;
unsigned long txt_end = 0;
if (!header_done)
{
printf_unfiltered("%-20s%-20s%-12s%s\n", "From", "To", "Syms Read",
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
"Shared Object Library");
header_done++;
}
if (so -> textsection)
{
txt_start = (unsigned long) so -> textsection -> addr;
txt_end = (unsigned long) so -> textsection -> endaddr;
}
printf_unfiltered ("%-20s", local_hex_string_custom (txt_start, "08l"));
printf_unfiltered ("%-20s", local_hex_string_custom (txt_end, "08l"));
printf_unfiltered ("%-12s", so -> symbols_loaded ? "Yes" : "No");
printf_unfiltered ("%s\n", so -> so_name);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
}
if (so_list_head == NULL)
{
printf_unfiltered ("No shared libraries loaded at this time.\n");
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
}
/*
GLOBAL FUNCTION
solib_address -- check to see if an address is in a shared lib
SYNOPSIS
char *solib_address (CORE_ADDR address)
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
DESCRIPTION
Provides a hook for other gdb routines to discover whether or
not a particular address is within the mapped address space of
a shared library. Any address between the base mapping address
and the first address beyond the end of the last mapping, is
considered to be within the shared library address space, for
our purposes.
For example, this routine is called at one point to disable
breakpoints which are in shared libraries that are not currently
mapped in.
*/
char *
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
solib_address (address)
CORE_ADDR address;
{
register struct so_list *so = 0; /* link map state variable */
while ((so = find_solib (so)) != NULL)
{
if (so -> so_name[0] && so -> textsection)
{
if ((address >= (CORE_ADDR) so -> textsection -> addr) &&
(address < (CORE_ADDR) so -> textsection -> endaddr))
return (so->so_name);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
}
return (0);
}
/* Called by free_all_symtabs */
void
clear_solib()
{
struct so_list *next;
char *bfd_filename;
while (so_list_head)
{
if (so_list_head -> sections)
{
free ((PTR)so_list_head -> sections);
}
if (so_list_head -> abfd)
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
{
bfd_filename = bfd_get_filename (so_list_head -> abfd);
if (!bfd_close (so_list_head -> abfd))
warning ("cannot close \"%s\": %s",
bfd_filename, bfd_errmsg (bfd_get_error ()));
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
else
/* This happens for the executable on SVR4. */
bfd_filename = NULL;
next = so_list_head -> next;
if (bfd_filename)
free ((PTR)bfd_filename);
free ((PTR)so_list_head);
so_list_head = next;
}
}
/*
GLOBAL FUNCTION
solib_create_inferior_hook -- shared library startup support
SYNOPSIS
void solib_create_inferior_hook()
DESCRIPTION
When gdb starts up the inferior, it nurses it along (through the
shell) until it is ready to execute it's first instruction. At this
point, this function gets called via expansion of the macro
SOLIB_CREATE_INFERIOR_HOOK.
For a statically bound executable, this first instruction is the
one at "_start", or a similar text label. No further processing is
needed in that case.
For a dynamically bound executable, this first instruction is somewhere
in the rld, and the actual user executable is not yet mapped in.
We continue the inferior again, rld then maps in the actual user
executable and any needed shared libraries and then sends
itself a SIGTRAP.
At that point we discover the names of all shared libraries and
read their symbols in.
FIXME
This code does not properly handle hitting breakpoints which the
user might have set in the rld itself. Proper handling would have
to check if the SIGTRAP happened due to a kill call.
Also, what if child has exit()ed? Must exit loop somehow.
*/
void
solib_create_inferior_hook()
{
/* Nothing to do for statically bound executables. */
if (symfile_objfile == NULL
|| symfile_objfile->obfd == NULL
|| ((bfd_get_file_flags (symfile_objfile->obfd) & DYNAMIC) == 0))
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
return;
/* Now run the target. It will eventually get a SIGTRAP, at
which point all of the libraries will have been mapped in and we
can go groveling around in the rld structures to find
out what we need to know about them. */
clear_proceed_status ();
stop_soon_quietly = 1;
stop_signal = TARGET_SIGNAL_0;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
do
{
* breakpoint.c (breakpoint_thread_match break_command_1): Thread-specific breakpoint support. * breakpoint.h (struct breakpoint): Add thread id field. * fork-child.c (fork_inferior): Move call to init_thread_list() back a bit so that init_trace_fun can do thread functions. * hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait. * hppab-nat.c (child_resume): Handle default pid. * hppah-nat.c (child_resume): Handle default pid. * i386lynx-nat.c (child_wait): New arg pid. * inflow.c (kill_command): Reset thread list. * infptrace.c (child_resume): Handle default pid. * infrun.c: Thread-specific breakpoint support. * inftarg.c (child_wait): Add pid arg. * osfsolib.c (solib_create_inferior_hook): Add pid to call to target_resume. * procfs.c: Multi-thread support. * remote-bug.c (bug_wait): Add pid arg. * remote-hms.c (hms_wait): Add pid arg. * remote-mips.c (mips_wait): Add pid arg. * remote-mon.c (monitor_wait): Add pid arg. * remote-nindy.c (nindy_wait): Add pid arg. * remote-sim.c (gdbsim_wait): Add pid arg. * remote-udi.c (udi_wait): Add pid arg. * remote-vx.c (vx_wait): Add pid arg. * remote-z8k.c (sim_wait): Add pid arg. * remote.c (remote_wait): Add pid arg. * solib.c (solib_create_inferior_hook): Add pid to call to target_resume. * target.h (struct target_ops): Add pid arg to to_wait and to_notice_signals. * thread.c (valid_thread_id): New func to validate thread #s. * (pid_to_thread_id): New func to do the obvious. * thread.h: Prototypes for above. * coff-solib.c (coff_solib_add): Use nameoffset field to locate filename.
1993-10-16 14:42:02 +08:00
target_resume (-1, 0, stop_signal);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
wait_for_inferior ();
}
while (stop_signal != TARGET_SIGNAL_TRAP);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
/* solib_add will call reinit_frame_cache.
But we are stopped in the runtime loader and we do not have symbols
for the runtime loader. So heuristic_proc_start will be called
and will put out an annoying warning.
Delaying the resetting of stop_soon_quietly until after symbol loading
suppresses the warning. */
if (auto_solib_add)
solib_add ((char *) 0, 0, (struct target_ops *) 0);
stop_soon_quietly = 0;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}
/*
LOCAL FUNCTION
sharedlibrary_command -- handle command to explicitly add library
SYNOPSIS
static void sharedlibrary_command (char *args, int from_tty)
DESCRIPTION
*/
static void
sharedlibrary_command (args, from_tty)
char *args;
int from_tty;
{
dont_repeat ();
solib_add (args, from_tty, (struct target_ops *) 0);
}
void
_initialize_solib()
{
add_com ("sharedlibrary", class_files, sharedlibrary_command,
"Load shared object library symbols for files matching REGEXP.");
add_info ("sharedlibrary", info_sharedlibrary_command,
"Status of loaded shared object libraries.");
add_show_from_set
(add_set_cmd ("auto-solib-add", class_support, var_zinteger,
(char *) &auto_solib_add,
"Set autoloading of shared library symbols.\n\
If nonzero, symbols from all shared object libraries will be loaded\n\
automatically when the inferior begins execution or when the dynamic linker\n\
informs gdb that a new library has been loaded. Otherwise, symbols\n\
must be loaded manually, using `sharedlibrary'.",
&setlist),
&showlist);
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-06 03:44:57 +08:00
}