Move readline to the readline/readline subdirectory
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-06 06:39:44 +08:00
|
|
|
This is an import of readline that is used by gdb.
|
1999-04-16 09:34:55 +08:00
|
|
|
|
Move readline to the readline/readline subdirectory
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-06 06:39:44 +08:00
|
|
|
To send patches, follow the gdb patch submission instructions in
|
|
|
|
|
../gdb/CONTRIBUTE. For maintainers, see ../gdb/MAINTAINERS.
|
1999-04-16 09:34:55 +08:00
|
|
|
|
Move readline to the readline/readline subdirectory
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-06 06:39:44 +08:00
|
|
|
If you need to patch readline, please document the changes here.
|
1999-04-16 09:34:55 +08:00
|
|
|
|
Move readline to the readline/readline subdirectory
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-06 06:39:44 +08:00
|
|
|
To import, copy the upstream readline sources into the "readline"
|
|
|
|
|
subdirectory, remembering to (1) remove any files that were deleted
|
|
|
|
|
upstream, and (2) merge the one small configure.ac patch that gdb
|
|
|
|
|
carries.
|
1999-04-16 09:34:55 +08:00
|
|
|
|
Move readline to the readline/readline subdirectory
readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.
The issue is that readline headers are intended to be included with
names like "readline/readline.h". To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.
For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case. This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.
Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree
https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html
However, Eli expressed some concerns, and Joel did as well (off-list).
Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.
That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.
This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers. A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.
gdb/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
gdb/doc/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
* Makefile.in (READLINE_DIR): Update.
readline/ChangeLog
2019-10-23 Tom Tromey <tom@tromey.com>
Move old contents to readline/ subdirectory.
* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
Makefile.in, README: New files.
Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4
2019-10-06 06:39:44 +08:00
|
|
|
If your import removes the need for a local patch, please remember to
|
|
|
|
|
update this file.
|
2020-07-01 05:17:07 +08:00
|
|
|
|
|
|
|
|
Individual upstream readline patches can be directly imported using
|
|
|
|
|
"git am". You can see the current patch level by looking at
|
|
|
|
|
readline/patchlevel.
|
