binutils-gdb/gdb/dwarf-index-cache.c

384 lines
10 KiB
C
Raw Normal View History

Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
/* Caching of GDB/DWARF index files.
Copyright (C) 1994-2020 Free Software Foundation, Inc.
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
Revert the header-sorting patch Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-07 03:38:10 +08:00
#include "dwarf-index-cache.h"
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
#include "build-id.h"
#include "cli/cli-cmds.h"
#include "command.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/scoped_mmap.h"
#include "gdbsupport/pathstuff.h"
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
#include "dwarf-index-write.h"
#include "dwarf2read.h"
#include "objfiles.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 10:29:24 +08:00
#include "gdbsupport/selftest.h"
Revert the header-sorting patch Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.
2019-04-07 03:38:10 +08:00
#include <string>
#include <stdlib.h>
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-15 03:36:58 +08:00
/* When set to true, show debug messages about the index cache. */
static bool debug_index_cache = false;
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
/* The index cache directory, used for "set/show index-cache directory". */
static char *index_cache_directory = NULL;
/* See dwarf-index.cache.h. */
index_cache global_index_cache;
/* set/show index-cache commands. */
static cmd_list_element *set_index_cache_prefix_list;
static cmd_list_element *show_index_cache_prefix_list;
/* Default destructor of index_cache_resource. */
index_cache_resource::~index_cache_resource () = default;
/* See dwarf-index-cache.h. */
void
index_cache::set_directory (std::string dir)
{
gdb_assert (!dir.empty ());
m_dir = std::move (dir);
if (debug_index_cache)
printf_unfiltered ("index cache: now using directory %s\n", m_dir.c_str ());
}
/* See dwarf-index-cache.h. */
void
index_cache::enable ()
{
if (debug_index_cache)
printf_unfiltered ("index cache: enabling (%s)\n", m_dir.c_str ());
m_enabled = true;
}
/* See dwarf-index-cache.h. */
void
index_cache::disable ()
{
if (debug_index_cache)
printf_unfiltered ("index cache: disabling\n");
m_enabled = false;
}
/* See dwarf-index-cache.h. */
void
index_cache::store (struct dwarf2_per_objfile *dwarf2_per_objfile)
{
objfile *obj = dwarf2_per_objfile->objfile;
if (!enabled ())
return;
Write index for dwz -m file PR 24445 ("dwz multifile index not written to index cache") exposed the fact that we are not doing things right when we generate an index for an object file that has is linked to a dwz file. The same happens whether the index is generated with the intent of populating the index cache or using the save gdb-index command. The problem can be observed when running these tests with the cc-with-dwz-m board: FAIL: gdb.base/index-cache.exp: test_cache_enabled_hit: check index-cache stats FAIL: gdb.dwarf2/gdb-index.exp: index used FAIL: gdb.dwarf2/gdb-index.exp: index used after symbol reloading When generating the index for such file and inspecting the CU list of the resulting index (with readelf --debug-dump=gdb_index), we can see something like: CU table: [ 0] 0x0 - 0xb9 [ 1] 0x0 - 0x44 This is supposed to be a sorted list of the ranges of all CUs in the file this index represents, so already having some overlap is a red flag. It turns out that we save the ranges of CUs coming from both the main file and the dwz file in the same index. After digging a little bit, it became quite obvious that the index in the main file should only list the CUs present in the main file, and a separate index should be generated for the dwz file, listing the CUs present in that file. First, that's what happens if you run dwz on a file that already has a GDB index embedded. Second, dwarf2read.c has code to read an index from a dwz file. The index in the dwz file is actually required to be present, if the main file has an index. So this patch changes write_psymtabs_to_index to generate an index for the dwz file, if present. That index only contains a CU list, just like what the dwz tool does when processing a file that already contains an index. Some notes about the implementation: - The file management (creating a temp file, make sure it's close/removed on error - in the right order) is a bit heavy in write_psymtabs_to_index, and I needed to add a third file. I factored this pattern in a separate class, index_wip_file. - It became a bit tedious to keep the call to assert_file_size in write_psymtabs_to_index, write_gdbindex would have had to return two sizes. Instead, I moved the calls to assert_file_size where the file is written. The downside is that we lose the filename at this point, but it was only used for the very improbable case of ftell failing, so I think it's not a problem. - The actual writing of the index file is factored out to write_gdbindex_1, so it can be re-used for both index files. - While the "save gdb-index" command will now write two .gdb-index files, this patch does not update the gdb-add-index.sh script, this will come in a later patch. gdb/ChangeLog: YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com> PR gdb/24445 * dwarf-index-write.h (write_psymtabs_to_index): Add dwz_basename parameter. * dwarf-index-write.c (write_gdbindex): Move file writing to write_gdbindex_1. Change return type void. (assert_file_size): Move up, remove filename parameter. (write_gdbindex_1): New function. (write_debug_names): Change return type to void, call assert_file_size. (struct index_wip_file): New struct. (write_psymtabs_to_index): Add dwz_basename parameter. Move file logic to index_wip_file. Write index for dwz file if needed. (save_gdb_index_command): Pass basename of dwz file, if present. * dwarf-index-cache.c (index_cache::store): Obtain and pass build-id of dwz file, if present. * dwarf2read.c (struct dwz_file): Move to dwarf2read.h. (dwarf2_get_dwz_file): Likewise. * dwarf2read.h (struct dwz_file): Move from dwarf2read.c. (dwarf2_get_dwz_file): Likewise. gdb/testsuite/ChangeLog: YYYY-MM-DD Tom de Vries <tdevries@suse.de> PR gdb/24445 * gdb.dwarf2/gdb-index.exp (add_gdb_index): Update dwz file with generated index.
2019-06-16 22:13:56 +08:00
/* Get build id of objfile. */
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
const bfd_build_id *build_id = build_id_bfd_get (obj->obfd);
if (build_id == nullptr)
{
if (debug_index_cache)
printf_unfiltered ("index cache: objfile %s has no build id\n",
objfile_name (obj));
return;
}
Write index for dwz -m file PR 24445 ("dwz multifile index not written to index cache") exposed the fact that we are not doing things right when we generate an index for an object file that has is linked to a dwz file. The same happens whether the index is generated with the intent of populating the index cache or using the save gdb-index command. The problem can be observed when running these tests with the cc-with-dwz-m board: FAIL: gdb.base/index-cache.exp: test_cache_enabled_hit: check index-cache stats FAIL: gdb.dwarf2/gdb-index.exp: index used FAIL: gdb.dwarf2/gdb-index.exp: index used after symbol reloading When generating the index for such file and inspecting the CU list of the resulting index (with readelf --debug-dump=gdb_index), we can see something like: CU table: [ 0] 0x0 - 0xb9 [ 1] 0x0 - 0x44 This is supposed to be a sorted list of the ranges of all CUs in the file this index represents, so already having some overlap is a red flag. It turns out that we save the ranges of CUs coming from both the main file and the dwz file in the same index. After digging a little bit, it became quite obvious that the index in the main file should only list the CUs present in the main file, and a separate index should be generated for the dwz file, listing the CUs present in that file. First, that's what happens if you run dwz on a file that already has a GDB index embedded. Second, dwarf2read.c has code to read an index from a dwz file. The index in the dwz file is actually required to be present, if the main file has an index. So this patch changes write_psymtabs_to_index to generate an index for the dwz file, if present. That index only contains a CU list, just like what the dwz tool does when processing a file that already contains an index. Some notes about the implementation: - The file management (creating a temp file, make sure it's close/removed on error - in the right order) is a bit heavy in write_psymtabs_to_index, and I needed to add a third file. I factored this pattern in a separate class, index_wip_file. - It became a bit tedious to keep the call to assert_file_size in write_psymtabs_to_index, write_gdbindex would have had to return two sizes. Instead, I moved the calls to assert_file_size where the file is written. The downside is that we lose the filename at this point, but it was only used for the very improbable case of ftell failing, so I think it's not a problem. - The actual writing of the index file is factored out to write_gdbindex_1, so it can be re-used for both index files. - While the "save gdb-index" command will now write two .gdb-index files, this patch does not update the gdb-add-index.sh script, this will come in a later patch. gdb/ChangeLog: YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com> PR gdb/24445 * dwarf-index-write.h (write_psymtabs_to_index): Add dwz_basename parameter. * dwarf-index-write.c (write_gdbindex): Move file writing to write_gdbindex_1. Change return type void. (assert_file_size): Move up, remove filename parameter. (write_gdbindex_1): New function. (write_debug_names): Change return type to void, call assert_file_size. (struct index_wip_file): New struct. (write_psymtabs_to_index): Add dwz_basename parameter. Move file logic to index_wip_file. Write index for dwz file if needed. (save_gdb_index_command): Pass basename of dwz file, if present. * dwarf-index-cache.c (index_cache::store): Obtain and pass build-id of dwz file, if present. * dwarf2read.c (struct dwz_file): Move to dwarf2read.h. (dwarf2_get_dwz_file): Likewise. * dwarf2read.h (struct dwz_file): Move from dwarf2read.c. (dwarf2_get_dwz_file): Likewise. gdb/testsuite/ChangeLog: YYYY-MM-DD Tom de Vries <tdevries@suse.de> PR gdb/24445 * gdb.dwarf2/gdb-index.exp (add_gdb_index): Update dwz file with generated index.
2019-06-16 22:13:56 +08:00
std::string build_id_str = build_id_to_string (build_id);
/* Get build id of dwz file, if present. */
gdb::optional<std::string> dwz_build_id_str;
const dwz_file *dwz = dwarf2_get_dwz_file (dwarf2_per_objfile);
const char *dwz_build_id_ptr = NULL;
if (dwz != nullptr)
{
const bfd_build_id *dwz_build_id = build_id_bfd_get (dwz->dwz_bfd.get ());
if (dwz_build_id == nullptr)
{
if (debug_index_cache)
printf_unfiltered ("index cache: dwz objfile %s has no build id\n",
dwz->filename ());
return;
}
dwz_build_id_str = build_id_to_string (dwz_build_id);
dwz_build_id_ptr = dwz_build_id_str->c_str ();
}
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
if (m_dir.empty ())
{
warning (_("The index cache directory name is empty, skipping store."));
return;
}
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 06:02:42 +08:00
try
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
{
/* Try to create the containing directory. */
if (!mkdir_recursive (m_dir.c_str ()))
{
Remove newlines from warnings ARI pointed out that a recent patch introduced a call to "warning" with a string that ended in a newline: https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html This is generally forbidden, I believe, because warning adds its own newline. This patch removes all of the trailing newlines I was able to find. I searched for 'warning (.*\\n"' and then fixed the ones where the newline appeared at the end of the string (some had internal newlines). Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-06-10 Tom Tromey <tromey@adacore.com> * m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning with a newline. * guile/guile.c (handle_boot_error): Don't end warning with a newline. * cli/cli-cmds.c (exit_status_set_internal_vars): Don't end warning with a newline. * s12z-tdep.c (s12z_skip_prologue): Don't end warning with a newline. (s12z_frame_cache): Likewise. * dwarf-index-cache.c (index_cache::store): Don't end warning with a newline. * solib-svr4.c (disable_probes_interface): Don't end warning with a newline. * nat/fork-inferior.c (fork_inferior): Don't end warning with a newline. * python/python.c (do_finish_initialization): Don't end warning with a newline. gdb/gdbserver/ChangeLog 2019-06-10 Tom Tromey <tromey@adacore.com> * remote-utils.c (look_up_one_symbol, relocate_instruction): Don't end warning with a newline. * linux-s390-low.c (s390_get_wordsize): Don't end warning with a newline. * thread-db.c (attach_thread): Don't end warning with a newline. (thread_db_notice_clone): Likewise. * tracepoint.c (gdb_agent_helper_thread): Don't end warning with a newline. * linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't end warning with a newline.
2019-06-03 22:07:29 +08:00
warning (_("index cache: could not make cache directory: %s"),
safe_strerror (errno));
return;
}
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
if (debug_index_cache)
printf_unfiltered ("index cache: writing index cache for objfile %s\n",
Write index for dwz -m file PR 24445 ("dwz multifile index not written to index cache") exposed the fact that we are not doing things right when we generate an index for an object file that has is linked to a dwz file. The same happens whether the index is generated with the intent of populating the index cache or using the save gdb-index command. The problem can be observed when running these tests with the cc-with-dwz-m board: FAIL: gdb.base/index-cache.exp: test_cache_enabled_hit: check index-cache stats FAIL: gdb.dwarf2/gdb-index.exp: index used FAIL: gdb.dwarf2/gdb-index.exp: index used after symbol reloading When generating the index for such file and inspecting the CU list of the resulting index (with readelf --debug-dump=gdb_index), we can see something like: CU table: [ 0] 0x0 - 0xb9 [ 1] 0x0 - 0x44 This is supposed to be a sorted list of the ranges of all CUs in the file this index represents, so already having some overlap is a red flag. It turns out that we save the ranges of CUs coming from both the main file and the dwz file in the same index. After digging a little bit, it became quite obvious that the index in the main file should only list the CUs present in the main file, and a separate index should be generated for the dwz file, listing the CUs present in that file. First, that's what happens if you run dwz on a file that already has a GDB index embedded. Second, dwarf2read.c has code to read an index from a dwz file. The index in the dwz file is actually required to be present, if the main file has an index. So this patch changes write_psymtabs_to_index to generate an index for the dwz file, if present. That index only contains a CU list, just like what the dwz tool does when processing a file that already contains an index. Some notes about the implementation: - The file management (creating a temp file, make sure it's close/removed on error - in the right order) is a bit heavy in write_psymtabs_to_index, and I needed to add a third file. I factored this pattern in a separate class, index_wip_file. - It became a bit tedious to keep the call to assert_file_size in write_psymtabs_to_index, write_gdbindex would have had to return two sizes. Instead, I moved the calls to assert_file_size where the file is written. The downside is that we lose the filename at this point, but it was only used for the very improbable case of ftell failing, so I think it's not a problem. - The actual writing of the index file is factored out to write_gdbindex_1, so it can be re-used for both index files. - While the "save gdb-index" command will now write two .gdb-index files, this patch does not update the gdb-add-index.sh script, this will come in a later patch. gdb/ChangeLog: YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com> PR gdb/24445 * dwarf-index-write.h (write_psymtabs_to_index): Add dwz_basename parameter. * dwarf-index-write.c (write_gdbindex): Move file writing to write_gdbindex_1. Change return type void. (assert_file_size): Move up, remove filename parameter. (write_gdbindex_1): New function. (write_debug_names): Change return type to void, call assert_file_size. (struct index_wip_file): New struct. (write_psymtabs_to_index): Add dwz_basename parameter. Move file logic to index_wip_file. Write index for dwz file if needed. (save_gdb_index_command): Pass basename of dwz file, if present. * dwarf-index-cache.c (index_cache::store): Obtain and pass build-id of dwz file, if present. * dwarf2read.c (struct dwz_file): Move to dwarf2read.h. (dwarf2_get_dwz_file): Likewise. * dwarf2read.h (struct dwz_file): Move from dwarf2read.c. (dwarf2_get_dwz_file): Likewise. gdb/testsuite/ChangeLog: YYYY-MM-DD Tom de Vries <tdevries@suse.de> PR gdb/24445 * gdb.dwarf2/gdb-index.exp (add_gdb_index): Update dwz file with generated index.
2019-06-16 22:13:56 +08:00
objfile_name (obj));
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
/* Write the index itself to the directory, using the build id as the
filename. */
write_psymtabs_to_index (dwarf2_per_objfile, m_dir.c_str (),
Write index for dwz -m file PR 24445 ("dwz multifile index not written to index cache") exposed the fact that we are not doing things right when we generate an index for an object file that has is linked to a dwz file. The same happens whether the index is generated with the intent of populating the index cache or using the save gdb-index command. The problem can be observed when running these tests with the cc-with-dwz-m board: FAIL: gdb.base/index-cache.exp: test_cache_enabled_hit: check index-cache stats FAIL: gdb.dwarf2/gdb-index.exp: index used FAIL: gdb.dwarf2/gdb-index.exp: index used after symbol reloading When generating the index for such file and inspecting the CU list of the resulting index (with readelf --debug-dump=gdb_index), we can see something like: CU table: [ 0] 0x0 - 0xb9 [ 1] 0x0 - 0x44 This is supposed to be a sorted list of the ranges of all CUs in the file this index represents, so already having some overlap is a red flag. It turns out that we save the ranges of CUs coming from both the main file and the dwz file in the same index. After digging a little bit, it became quite obvious that the index in the main file should only list the CUs present in the main file, and a separate index should be generated for the dwz file, listing the CUs present in that file. First, that's what happens if you run dwz on a file that already has a GDB index embedded. Second, dwarf2read.c has code to read an index from a dwz file. The index in the dwz file is actually required to be present, if the main file has an index. So this patch changes write_psymtabs_to_index to generate an index for the dwz file, if present. That index only contains a CU list, just like what the dwz tool does when processing a file that already contains an index. Some notes about the implementation: - The file management (creating a temp file, make sure it's close/removed on error - in the right order) is a bit heavy in write_psymtabs_to_index, and I needed to add a third file. I factored this pattern in a separate class, index_wip_file. - It became a bit tedious to keep the call to assert_file_size in write_psymtabs_to_index, write_gdbindex would have had to return two sizes. Instead, I moved the calls to assert_file_size where the file is written. The downside is that we lose the filename at this point, but it was only used for the very improbable case of ftell failing, so I think it's not a problem. - The actual writing of the index file is factored out to write_gdbindex_1, so it can be re-used for both index files. - While the "save gdb-index" command will now write two .gdb-index files, this patch does not update the gdb-add-index.sh script, this will come in a later patch. gdb/ChangeLog: YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com> PR gdb/24445 * dwarf-index-write.h (write_psymtabs_to_index): Add dwz_basename parameter. * dwarf-index-write.c (write_gdbindex): Move file writing to write_gdbindex_1. Change return type void. (assert_file_size): Move up, remove filename parameter. (write_gdbindex_1): New function. (write_debug_names): Change return type to void, call assert_file_size. (struct index_wip_file): New struct. (write_psymtabs_to_index): Add dwz_basename parameter. Move file logic to index_wip_file. Write index for dwz file if needed. (save_gdb_index_command): Pass basename of dwz file, if present. * dwarf-index-cache.c (index_cache::store): Obtain and pass build-id of dwz file, if present. * dwarf2read.c (struct dwz_file): Move to dwarf2read.h. (dwarf2_get_dwz_file): Likewise. * dwarf2read.h (struct dwz_file): Move from dwarf2read.c. (dwarf2_get_dwz_file): Likewise. gdb/testsuite/ChangeLog: YYYY-MM-DD Tom de Vries <tdevries@suse.de> PR gdb/24445 * gdb.dwarf2/gdb-index.exp (add_gdb_index): Update dwz file with generated index.
2019-06-16 22:13:56 +08:00
build_id_str.c_str (), dwz_build_id_ptr,
dw_index_kind::GDB_INDEX);
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-04 05:59:07 +08:00
catch (const gdb_exception_error &except)
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
{
if (debug_index_cache)
printf_unfiltered ("index cache: couldn't store index cache for objfile "
Make exceptions use std::string and be self-managing This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.
2019-01-29 01:11:10 +08:00
"%s: %s", objfile_name (obj), except.what ());
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
}
}
#if HAVE_SYS_MMAN_H
/* Hold the resources for an mmapped index file. */
struct index_cache_resource_mmap final : public index_cache_resource
{
/* Try to mmap FILENAME. Throw an exception on failure, including if the
file doesn't exist. */
index_cache_resource_mmap (const char *filename)
: mapping (mmap_file (filename))
{}
scoped_mmap mapping;
};
/* See dwarf-index-cache.h. */
gdb::array_view<const gdb_byte>
index_cache::lookup_gdb_index (const bfd_build_id *build_id,
std::unique_ptr<index_cache_resource> *resource)
{
if (!enabled ())
return {};
if (m_dir.empty ())
{
warning (_("The index cache directory name is empty, skipping cache "
"lookup."));
return {};
}
/* Compute where we would expect a gdb index file for this build id to be. */
std::string filename = make_index_filename (build_id, INDEX4_SUFFIX);
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 06:02:42 +08:00
try
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
{
if (debug_index_cache)
printf_unfiltered ("index cache: trying to read %s\n",
filename.c_str ());
/* Try to map that file. */
index_cache_resource_mmap *mmap_resource
= new index_cache_resource_mmap (filename.c_str ());
/* Yay, it worked! Hand the resource to the caller. */
resource->reset (mmap_resource);
return gdb::array_view<const gdb_byte>
((const gdb_byte *) mmap_resource->mapping.get (),
mmap_resource->mapping.size ());
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-04 05:59:07 +08:00
catch (const gdb_exception_error &except)
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
{
if (debug_index_cache)
printf_unfiltered ("index cache: couldn't read %s: %s\n",
Make exceptions use std::string and be self-managing This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.
2019-01-29 01:11:10 +08:00
filename.c_str (), except.what ());
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
}
return {};
}
#else /* !HAVE_SYS_MMAN_H */
/* See dwarf-index-cache.h. This is a no-op on unsupported systems. */
gdb::array_view<const gdb_byte>
index_cache::lookup_gdb_index (const bfd_build_id *build_id,
std::unique_ptr<index_cache_resource> *resource)
{
return {};
}
#endif
/* See dwarf-index-cache.h. */
std::string
index_cache::make_index_filename (const bfd_build_id *build_id,
const char *suffix) const
{
std::string build_id_str = build_id_to_string (build_id);
return m_dir + SLASH_STRING + build_id_str + suffix;
}
/* "set index-cache" handler. */
static void
set_index_cache_command (const char *arg, int from_tty)
{
printf_unfiltered (_("\
Missing arguments. See \"help set index-cache\" for help.\n"));
}
/* True when we are executing "show index-cache". This is used to improve the
printout a little bit. */
static bool in_show_index_cache_command = false;
/* "show index-cache" handler. */
static void
show_index_cache_command (const char *arg, int from_tty)
{
/* Note that we are executing "show index-cache". */
auto restore_flag = make_scoped_restore (&in_show_index_cache_command, true);
/* Call all "show index-cache" subcommands. */
cmd_show_list (show_index_cache_prefix_list, from_tty, "");
printf_unfiltered ("\n");
printf_unfiltered
(_("The index cache is currently %s.\n"),
global_index_cache.enabled () ? _("enabled") : _("disabled"));
}
/* "set index-cache on" handler. */
static void
set_index_cache_on_command (const char *arg, int from_tty)
{
global_index_cache.enable ();
}
/* "set index-cache off" handler. */
static void
set_index_cache_off_command (const char *arg, int from_tty)
{
global_index_cache.disable ();
}
/* "set index-cache directory" handler. */
static void
set_index_cache_directory_command (const char *arg, int from_tty,
cmd_list_element *element)
{
/* Make sure the index cache directory is absolute and tilde-expanded. */
gdb::unique_xmalloc_ptr<char> abs (gdb_abspath (index_cache_directory));
xfree (index_cache_directory);
index_cache_directory = abs.release ();
global_index_cache.set_directory (index_cache_directory);
}
/* "show index-cache stats" handler. */
static void
show_index_cache_stats_command (const char *arg, int from_tty)
{
const char *indent = "";
/* If this command is invoked through "show index-cache", make the display a
bit nicer. */
if (in_show_index_cache_command)
{
indent = " ";
printf_unfiltered ("\n");
}
printf_unfiltered (_("%s Cache hits (this session): %u\n"),
indent, global_index_cache.n_hits ());
printf_unfiltered (_("%sCache misses (this session): %u\n"),
indent, global_index_cache.n_misses ());
}
gdb: add back declarations for _initialize functions I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9 Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
2020-01-14 03:01:38 +08:00
void _initialize_index_cache ();
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
void
_initialize_index_cache ()
{
/* Set the default index cache directory. */
std::string cache_dir = get_standard_cache_dir ();
if (!cache_dir.empty ())
{
index_cache_directory = xstrdup (cache_dir.c_str ());
global_index_cache.set_directory (std::move (cache_dir));
}
else
warning (_("Couldn't determine a path for the index cache directory."));
/* set index-cache */
add_prefix_cmd ("index-cache", class_files, set_index_cache_command,
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 17:16:20 +08:00
_("Set index-cache options."), &set_index_cache_prefix_list,
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
"set index-cache ", false, &setlist);
/* show index-cache */
add_prefix_cmd ("index-cache", class_files, show_index_cache_command,
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 17:16:20 +08:00
_("Show index-cache options."), &show_index_cache_prefix_list,
Add DWARF index cache New in v3: - Remove things related to the dwarf-5 format. - Fix compilation on mingw (scoped_mmap.c). GDB can generate indexes for DWARF debug information, which, when integrated in the original binary, can speed up loading object files. This can be done using the gdb-add-index script or directly by the linker itself. However, not many people know about this. And even among those who do, because it requires additional steps, I don't know a lot of people who actually go through that trouble. To help make using the DWARF index more transparent, this patch introduces a DWARF index cache. When enabled, loading an index-less binary in GDB will automatically save an index file in ~/.cache/gdb. When loading that same object file again, the index file will be looked up and used to load the DWARF index. You therefore get the benefit of the DWARF index without having to do additional manual steps or modifying your build system. When an index section is already present in the file, GDB will prefer that one over looking up the cache. When doing my edit-compile-debug cycle, I often debug multiple times the same build, so the cache helps reducing the load time of the debug sessions after the first one. - The saved index file is exactly the same as the output of the "save gdb-index" command. It is therefore the exact same content that would be found in the .gdb_index or .debug_names section. We just leave it as a standalone file instead of merging it in the binary. - The cache is just a directory with files named after the object file's build-id. It is not possible to save/load the index for an object file without build-id in the cache. - The cache uses the gdb index format. The problem with the dwarf-5 format is that we can generate an addendum to the .debug_str section that you're supposed to integrate to the original binary. This complicates a little bit loading the data from the cached index files, so I would leave this for later. - The size taken up by ~/.cache/gdb is not limited. I was thinking we could add configurable limit (like ccache does), but that would come after. Also, maybe a command to flush the cache. - The cache is disabled by default. I think once it's been out there and tested for a while, it could be turned on by default, so that everybody can enjoy it. - The code was made to follow the XDG specification: if the XDG_CACHE_HOME environment variable, it is used, otherwise it falls back to ~/.cache/gdb. It is possible to change it using "set index-cache directory". On other OSes than GNU/Linux, ~/.cache may not be the best place to put such data. On macOS it should probably default to ~/Library/Caches/... On Windows, %LocalAppData%/... I don't intend to do this part, but further patches are welcome. - I think that we need to be careful that multiple instances of GDB don't interfere with each other (not far fetched at all if you run GDB in some automated script) and the cache is always coherent (either the file is not found, or it is found and entirely valid). Writing the file directly to its final location seems like a recipe for failure. One GDB could read a file in the index while it is being written by another GDB. To mitigate this, I made write_psymtabs_to_index write to temporary files and rename them once it's done. Two GDB instances writing the index for the same file should not step on each other's toes (the last file to be renamed will stay). A GDB looking up a file will only see a complete file or no file. Also, if GDB crashes while generating the index file, it will leave a work-in-progress file, but it won't be picked up by other instances looking up in the cache. gdb/ChangeLog: * common/pathstuff.h (get_standard_cache_dir): New. * common/pathstuff.c (get_standard_cache_dir): New. * build-id.h (build_id_to_string): New. * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move to here. * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX, DEBUG_STR_SUFFIX): Move from there. (write_psymtabs_to_index): Make non-static, add basename parameter. Write to temporary files, rename when done. (save_gdb_index_command): Adjust call to write_psymtabs_to_index. * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New field. * dwarf2read.c (dwz_file) <index_cache_res>: New field. (get_gdb_index_contents_from_cache): New. (get_gdb_index_contents_from_cache_dwz): New. (dwarf2_initialize_objfile): Read index from cache. (dwarf2_build_psymtabs): Save to index. * dwarf-index-cache.h: New file. * dwarf-index-cache.c: New file. * dwarf-index-write.h: New file. gdb/testsuite/ChangeLog: * boards/index-cache-gdb.exp: New file. * gdb.dwarf2/index-cache.exp: New file. * gdb.dwarf2/index-cache.c: New file. * gdb.base/maint.exp: Check if we are using the index cache.
2018-08-08 06:14:20 +08:00
"show index-cache ", false, &showlist);
/* set index-cache on */
add_cmd ("on", class_files, set_index_cache_on_command,
_("Enable the index cache."), &set_index_cache_prefix_list);
/* set index-cache off */
add_cmd ("off", class_files, set_index_cache_off_command,
_("Disable the index cache."), &set_index_cache_prefix_list);
/* set index-cache directory */
add_setshow_filename_cmd ("directory", class_files, &index_cache_directory,
_("Set the directory of the index cache."),
_("Show the directory of the index cache."),
NULL,
set_index_cache_directory_command, NULL,
&set_index_cache_prefix_list,
&show_index_cache_prefix_list);
/* show index-cache stats */
add_cmd ("stats", class_files, show_index_cache_stats_command,
_("Show some stats about the index cache."),
&show_index_cache_prefix_list);
/* set debug index-cache */
add_setshow_boolean_cmd ("index-cache", class_maintenance,
&debug_index_cache,
_("Set display of index-cache debug messages."),
_("Show display of index-cache debug messages."),
_("\
When non-zero, debugging output for the index cache is displayed."),
NULL, NULL,
&setdebuglist, &showdebuglist);
}