libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
/* Opening CTF files.
|
2021-01-01 06:58:58 +08:00
|
|
|
Copyright (C) 2019-2021 Free Software Foundation, Inc.
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
This file is part of libctf.
|
|
|
|
|
|
|
|
libctf is free software; you can redistribute it and/or modify it under
|
|
|
|
the terms of the GNU General Public License as published by the Free
|
|
|
|
Software Foundation; either version 3, or (at your option) any later
|
|
|
|
version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful, but
|
|
|
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
|
|
See the GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; see the file COPYING. If not see
|
|
|
|
<http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
#include <ctf-impl.h>
|
|
|
|
#include <stddef.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <sys/types.h>
|
|
|
|
#include <elf.h>
|
|
|
|
#include "swap.h"
|
|
|
|
#include <bfd.h>
|
|
|
|
#include <zlib.h>
|
|
|
|
|
|
|
|
static const ctf_dmodel_t _libctf_models[] = {
|
|
|
|
{"ILP32", CTF_MODEL_ILP32, 4, 1, 2, 4, 4},
|
|
|
|
{"LP64", CTF_MODEL_LP64, 8, 1, 2, 4, 8},
|
|
|
|
{NULL, 0, 0, 0, 0, 0, 0}
|
|
|
|
};
|
|
|
|
|
|
|
|
const char _CTF_SECTION[] = ".ctf";
|
|
|
|
const char _CTF_NULLSTR[] = "";
|
|
|
|
|
|
|
|
/* Version-sensitive accessors. */
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_kind_v1 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V1_INFO_KIND (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_root_v1 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V1_INFO_ISROOT (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_vlen_v1 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V1_INFO_VLEN (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_kind_v2 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V2_INFO_KIND (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_root_v2 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V2_INFO_ISROOT (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
get_vlen_v2 (uint32_t info)
|
|
|
|
{
|
|
|
|
return (CTF_V2_INFO_VLEN (info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_ctt_size_common (const ctf_dict_t *fp _libctf_unused_,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
const ctf_type_t *tp _libctf_unused_,
|
|
|
|
ssize_t *sizep, ssize_t *incrementp, size_t lsize,
|
|
|
|
size_t csize, size_t ctf_type_size,
|
|
|
|
size_t ctf_stype_size, size_t ctf_lsize_sent)
|
|
|
|
{
|
|
|
|
ssize_t size, increment;
|
|
|
|
|
|
|
|
if (csize == ctf_lsize_sent)
|
|
|
|
{
|
|
|
|
size = lsize;
|
|
|
|
increment = ctf_type_size;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
size = csize;
|
|
|
|
increment = ctf_stype_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sizep)
|
|
|
|
*sizep = size;
|
|
|
|
if (incrementp)
|
|
|
|
*incrementp = increment;
|
|
|
|
|
|
|
|
return size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_ctt_size_v1 (const ctf_dict_t *fp, const ctf_type_t *tp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ssize_t *sizep, ssize_t *incrementp)
|
|
|
|
{
|
|
|
|
ctf_type_v1_t *t1p = (ctf_type_v1_t *) tp;
|
|
|
|
|
|
|
|
return (get_ctt_size_common (fp, tp, sizep, incrementp,
|
|
|
|
CTF_TYPE_LSIZE (t1p), t1p->ctt_size,
|
|
|
|
sizeof (ctf_type_v1_t), sizeof (ctf_stype_v1_t),
|
|
|
|
CTF_LSIZE_SENT_V1));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return the size that a v1 will be once it is converted to v2. */
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_ctt_size_v2_unconverted (const ctf_dict_t *fp, const ctf_type_t *tp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ssize_t *sizep, ssize_t *incrementp)
|
|
|
|
{
|
|
|
|
ctf_type_v1_t *t1p = (ctf_type_v1_t *) tp;
|
|
|
|
|
|
|
|
return (get_ctt_size_common (fp, tp, sizep, incrementp,
|
|
|
|
CTF_TYPE_LSIZE (t1p), t1p->ctt_size,
|
|
|
|
sizeof (ctf_type_t), sizeof (ctf_stype_t),
|
|
|
|
CTF_LSIZE_SENT));
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_ctt_size_v2 (const ctf_dict_t *fp, const ctf_type_t *tp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ssize_t *sizep, ssize_t *incrementp)
|
|
|
|
{
|
|
|
|
return (get_ctt_size_common (fp, tp, sizep, incrementp,
|
|
|
|
CTF_TYPE_LSIZE (tp), tp->ctt_size,
|
|
|
|
sizeof (ctf_type_t), sizeof (ctf_stype_t),
|
|
|
|
CTF_LSIZE_SENT));
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_vbytes_common (ctf_dict_t *fp, unsigned short kind,
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ssize_t size _libctf_unused_, size_t vlen)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_INTEGER:
|
|
|
|
case CTF_K_FLOAT:
|
|
|
|
return (sizeof (uint32_t));
|
|
|
|
case CTF_K_SLICE:
|
libctf: endianness fixes
Testing of the first code to generate CTF_K_SLICEs on big-endian
revealed a bunch of new problems in this area. Most importantly, the
trick we did earlier to avoid wasting two bytes on padding in the
ctf_slice_t is best avoided: because it leads to the whole file after
that point no longer being naturally aligned, all multibyte accesses
from then on must use memmove() to avoid unaligned access on platforms
where that is fatal. In future, this is planned, but for now we are
still doing direct access in many places, so we must revert to making
ctf_slice_t properly aligned for storage in an array.
Rather than wasting bytes on padding, we boost the size of cts_offset
and cts_bits. This is still a waste of space (we cannot have offsets or
bits in bitfields > 256) but it cannot be avoided for now, and slices
are not so common that this will be a serious problem.
A possibly-worse endianness problem fixed at the same time involves
a codepath used only for foreign-endian, uncompressed CTF files, where
we were not copying the actual CTF data into the buffer, leading to
libctf reading only zeroes (or, possibly, uninitialized garbage).
Finally, when we read in a CTF file, we copy the header and work from
the copy. We were flipping the endianness of the header copy, and of
the body of the file buffer, but not of the header in the file buffer
itself: so if we write the file back out again we end up with an
unreadable frankenfile with header and body of different endiannesses.
Fix by flipping both copies of the header.
include/
* ctf.h (ctf_slice_t): Make cts_offset and cts_bits unsigned
short, so following structures are properly aligned.
libctf/
* ctf-open.c (get_vbytes_common): Return the new slice size.
(ctf_bufopen): Flip the endianness of the CTF-section header copy.
Remember to copy in the CTF data when opening an uncompressed
foreign-endian CTF file. Prune useless variable manipulation.
2019-06-19 19:34:56 +08:00
|
|
|
return (sizeof (ctf_slice_t));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
case CTF_K_ENUM:
|
|
|
|
return (sizeof (ctf_enum_t) * vlen);
|
|
|
|
case CTF_K_FORWARD:
|
|
|
|
case CTF_K_UNKNOWN:
|
|
|
|
case CTF_K_POINTER:
|
|
|
|
case CTF_K_TYPEDEF:
|
|
|
|
case CTF_K_VOLATILE:
|
|
|
|
case CTF_K_CONST:
|
|
|
|
case CTF_K_RESTRICT:
|
|
|
|
return 0;
|
|
|
|
default:
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_set_errno (fp, ECTF_CORRUPT);
|
|
|
|
ctf_err_warn (fp, 0, 0, _("detected invalid CTF kind: %x"), kind);
|
|
|
|
return -1;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_vbytes_v1 (ctf_dict_t *fp, unsigned short kind, ssize_t size, size_t vlen)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
return (sizeof (ctf_array_v1_t));
|
|
|
|
case CTF_K_FUNCTION:
|
|
|
|
return (sizeof (unsigned short) * (vlen + (vlen & 1)));
|
|
|
|
case CTF_K_STRUCT:
|
|
|
|
case CTF_K_UNION:
|
|
|
|
if (size < CTF_LSTRUCT_THRESH_V1)
|
|
|
|
return (sizeof (ctf_member_v1_t) * vlen);
|
|
|
|
else
|
|
|
|
return (sizeof (ctf_lmember_v1_t) * vlen);
|
|
|
|
}
|
|
|
|
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
return (get_vbytes_common (fp, kind, size, vlen));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
get_vbytes_v2 (ctf_dict_t *fp, unsigned short kind, ssize_t size, size_t vlen)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
return (sizeof (ctf_array_t));
|
|
|
|
case CTF_K_FUNCTION:
|
|
|
|
return (sizeof (uint32_t) * (vlen + (vlen & 1)));
|
|
|
|
case CTF_K_STRUCT:
|
|
|
|
case CTF_K_UNION:
|
|
|
|
if (size < CTF_LSTRUCT_THRESH)
|
|
|
|
return (sizeof (ctf_member_t) * vlen);
|
|
|
|
else
|
|
|
|
return (sizeof (ctf_lmember_t) * vlen);
|
|
|
|
}
|
|
|
|
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
return (get_vbytes_common (fp, kind, size, vlen));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
static const ctf_dictops_t ctf_dictops[] = {
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{NULL, NULL, NULL, NULL, NULL},
|
|
|
|
/* CTF_VERSION_1 */
|
|
|
|
{get_kind_v1, get_root_v1, get_vlen_v1, get_ctt_size_v1, get_vbytes_v1},
|
|
|
|
/* CTF_VERSION_1_UPGRADED_3 */
|
|
|
|
{get_kind_v2, get_root_v2, get_vlen_v2, get_ctt_size_v2, get_vbytes_v2},
|
|
|
|
/* CTF_VERSION_2 */
|
|
|
|
{get_kind_v2, get_root_v2, get_vlen_v2, get_ctt_size_v2, get_vbytes_v2},
|
|
|
|
/* CTF_VERSION_3, identical to 2: only new type kinds */
|
|
|
|
{get_kind_v2, get_root_v2, get_vlen_v2, get_ctt_size_v2, get_vbytes_v2},
|
|
|
|
};
|
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
/* Initialize the symtab translation table as appropriate for its indexing
|
|
|
|
state. For unindexed symtypetabs, fill each entry with the offset of the CTF
|
|
|
|
type or function data corresponding to each STT_FUNC or STT_OBJECT entry in
|
|
|
|
the symbol table. For indexed symtypetabs, do nothing: the needed
|
|
|
|
initialization for indexed lookups may be quite expensive, so it is done only
|
|
|
|
as needed, when lookups happen. (In particular, the majority of indexed
|
|
|
|
symtypetabs come from the compiler, and all the linker does is iteration over
|
|
|
|
all entries, which doesn't need this initialization.)
|
|
|
|
|
libctf, include: support foreign-endianness symtabs with CTF
The CTF symbol lookup machinery added recently has one deficit: it
assumes the symtab is in the machine's native endianness. This is
always true when the linker is writing out symtabs (because cross
linkers byteswap symbols only after libctf has been called on them), but
may be untrue in the cross case when the linker or another tool
(objdump, etc) is reading them.
Unfortunately the easy way to model this to the caller, as an endianness
field in the ctf_sect_t, is precluded because doing so would change the
size of the ctf_sect_t, which would be an ABI break. So, instead, allow
the endianness of the symtab to be set after open time, by calling one
of the two new API functions ctf_symsect_endianness (for ctf_dict_t's)
or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf
calls these functions automatically for objects opened via any of the
BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen,
ctf_open, or ctf_arc_open), but the various mechanisms that just take
raw ctf_sect_t's will assume the symtab is in native endianness and need
a later call to ctf_*symsect_endianness to adjust it if needed. (This
call is basically free if the endianness is actually native: it only
costs anything if the symtab endianness was previously guessed wrong,
and there is a symtab, and we are using it directly rather than using
symtab indexing.)
Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the
symtab endianness is correctly set will probably give wrong answers --
but you can set it at any time as long as it is before then.
include/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h: Style nit: remove () on function names in comments.
(ctf_sect_t): Mention endianness concerns.
(ctf_symsect_endianness): New declaration.
(ctf_arc_symsect_endianness): Likewise.
libctf/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New.
(struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise.
* ctf-create.c (ctf_serialize): Adjust for new field.
* ctf-open.c (init_symtab): Note the semantics of repeated calls.
(ctf_symsect_endianness): New.
(ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for
the native endianness.
(_Static_assert): Moved...
(swap_thing): ... with this...
* swap.h: ... to here.
* ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the
Elf32_Sym if the ctf_symtab_little_endian demands it.
(ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed.
* ctf-archive.c (ctf_arc_symsect_endianness): New, set the
endianness of the symtab used by the dicts in an archive.
(ctf_archive_iter_internal): Initialize to unknown (assumed native,
do not call ctf_symsect_endianness).
(ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be.
(ctf_dict_open_internal): Propagate the endianness down.
(ctf_dict_open_sections): Likewise.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the
struct bfd and pass it down to the archive.
* libctf.ver: Add ctf_symsect_endianness and
ctf_arc_symsect_endianness.
2020-11-24 05:17:44 +08:00
|
|
|
The SP symbol table section may be NULL if there is no symtab.
|
|
|
|
|
|
|
|
If init_symtab works on one call, it cannot fail on future calls to the same
|
|
|
|
fp: ctf_symsect_endianness relies on this. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
static int
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
init_symtab (ctf_dict_t *fp, const ctf_header_t *hp, const ctf_sect_t *sp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
const unsigned char *symp;
|
|
|
|
int skip_func_info = 0;
|
|
|
|
int i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
uint32_t *xp = fp->ctf_sxlate;
|
|
|
|
uint32_t *xend = xp + fp->ctf_nsyms;
|
|
|
|
|
|
|
|
uint32_t objtoff = hp->cth_objtoff;
|
|
|
|
uint32_t funcoff = hp->cth_funcoff;
|
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
/* If the CTF_F_NEWFUNCINFO flag is not set, pretend the func info section
|
|
|
|
is empty: this compiler is too old to emit a function info section we
|
|
|
|
understand. */
|
|
|
|
|
|
|
|
if (!(hp->cth_flags & CTF_F_NEWFUNCINFO))
|
|
|
|
skip_func_info = 1;
|
|
|
|
|
|
|
|
if (hp->cth_objtidxoff < hp->cth_funcidxoff)
|
|
|
|
fp->ctf_objtidx_names = (uint32_t *) (fp->ctf_buf + hp->cth_objtidxoff);
|
|
|
|
if (hp->cth_funcidxoff < hp->cth_varoff && !skip_func_info)
|
|
|
|
fp->ctf_funcidx_names = (uint32_t *) (fp->ctf_buf + hp->cth_funcidxoff);
|
|
|
|
|
|
|
|
/* Don't bother doing the rest if everything is indexed, or if we don't have a
|
|
|
|
symbol table: we will never use it. */
|
|
|
|
if ((fp->ctf_objtidx_names && fp->ctf_funcidx_names) || !sp || !sp->cts_data)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* The CTF data object and function type sections are ordered to match the
|
|
|
|
relative order of the respective symbol types in the symtab, unless there
|
|
|
|
is an index section, in which case the order is arbitrary and the index
|
|
|
|
gives the mapping. If no type information is available for a symbol table
|
|
|
|
entry, a pad is inserted in the CTF section. As a further optimization,
|
|
|
|
anonymous or undefined symbols are omitted from the CTF data. If an
|
|
|
|
index is available for function symbols but not object symbols, or vice
|
|
|
|
versa, we populate the xslate table for the unindexed symbols only. */
|
|
|
|
|
|
|
|
for (i = 0, symp = sp->cts_data; xp < xend; xp++, symp += sp->cts_entsize,
|
|
|
|
i++)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_link_sym_t sym;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
switch (sp->cts_entsize)
|
|
|
|
{
|
|
|
|
case sizeof (Elf64_Sym):
|
|
|
|
{
|
|
|
|
const Elf64_Sym *symp64 = (Elf64_Sym *) (uintptr_t) symp;
|
|
|
|
ctf_elf64_to_link_sym (fp, &sym, symp64, i);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case sizeof (Elf32_Sym):
|
|
|
|
{
|
|
|
|
const Elf32_Sym *symp32 = (Elf32_Sym *) (uintptr_t) symp;
|
|
|
|
ctf_elf32_to_link_sym (fp, &sym, symp32, i);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ECTF_SYMTAB;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf, include: support foreign-endianness symtabs with CTF
The CTF symbol lookup machinery added recently has one deficit: it
assumes the symtab is in the machine's native endianness. This is
always true when the linker is writing out symtabs (because cross
linkers byteswap symbols only after libctf has been called on them), but
may be untrue in the cross case when the linker or another tool
(objdump, etc) is reading them.
Unfortunately the easy way to model this to the caller, as an endianness
field in the ctf_sect_t, is precluded because doing so would change the
size of the ctf_sect_t, which would be an ABI break. So, instead, allow
the endianness of the symtab to be set after open time, by calling one
of the two new API functions ctf_symsect_endianness (for ctf_dict_t's)
or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf
calls these functions automatically for objects opened via any of the
BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen,
ctf_open, or ctf_arc_open), but the various mechanisms that just take
raw ctf_sect_t's will assume the symtab is in native endianness and need
a later call to ctf_*symsect_endianness to adjust it if needed. (This
call is basically free if the endianness is actually native: it only
costs anything if the symtab endianness was previously guessed wrong,
and there is a symtab, and we are using it directly rather than using
symtab indexing.)
Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the
symtab endianness is correctly set will probably give wrong answers --
but you can set it at any time as long as it is before then.
include/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h: Style nit: remove () on function names in comments.
(ctf_sect_t): Mention endianness concerns.
(ctf_symsect_endianness): New declaration.
(ctf_arc_symsect_endianness): Likewise.
libctf/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New.
(struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise.
* ctf-create.c (ctf_serialize): Adjust for new field.
* ctf-open.c (init_symtab): Note the semantics of repeated calls.
(ctf_symsect_endianness): New.
(ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for
the native endianness.
(_Static_assert): Moved...
(swap_thing): ... with this...
* swap.h: ... to here.
* ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the
Elf32_Sym if the ctf_symtab_little_endian demands it.
(ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed.
* ctf-archive.c (ctf_arc_symsect_endianness): New, set the
endianness of the symtab used by the dicts in an archive.
(ctf_archive_iter_internal): Initialize to unknown (assumed native,
do not call ctf_symsect_endianness).
(ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be.
(ctf_dict_open_internal): Propagate the endianness down.
(ctf_dict_open_sections): Likewise.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the
struct bfd and pass it down to the archive.
* libctf.ver: Add ctf_symsect_endianness and
ctf_arc_symsect_endianness.
2020-11-24 05:17:44 +08:00
|
|
|
/* This call may be led astray if our idea of the symtab's endianness is
|
|
|
|
wrong, but when this is fixed by a call to ctf_symsect_endianness,
|
|
|
|
init_symtab will be called again with the right endianness in
|
|
|
|
force. */
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
if (ctf_symtab_skippable (&sym))
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
*xp = -1u;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
switch (sym.st_type)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
case STT_OBJECT:
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
if (fp->ctf_objtidx_names || objtoff >= hp->cth_funcoff)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
*xp = -1u;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
*xp = objtoff;
|
|
|
|
objtoff += sizeof (uint32_t);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case STT_FUNC:
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
if (fp->ctf_funcidx_names || funcoff >= hp->cth_objtidxoff
|
|
|
|
|| skip_func_info)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
*xp = -1u;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
*xp = funcoff;
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
funcoff += sizeof (uint32_t);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
*xp = -1u;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ctf_dprintf ("loaded %lu symtab entries\n", fp->ctf_nsyms);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Reset the CTF base pointer and derive the buf pointer from it, initializing
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
everything in the ctf_dict that depends on the base or buf pointers.
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|
|
|
|
The original gap between the buf and base pointers, if any -- the original,
|
|
|
|
unconverted CTF header -- is kept, but its contents are not specified and are
|
|
|
|
never used. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
static void
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_set_base (ctf_dict_t *fp, const ctf_header_t *hp, unsigned char *base)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
fp->ctf_buf = base + (fp->ctf_buf - fp->ctf_base);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_base = base;
|
|
|
|
fp->ctf_vars = (ctf_varent_t *) ((const char *) fp->ctf_buf +
|
|
|
|
hp->cth_varoff);
|
|
|
|
fp->ctf_nvars = (hp->cth_typeoff - hp->cth_varoff) / sizeof (ctf_varent_t);
|
|
|
|
|
|
|
|
fp->ctf_str[CTF_STRTAB_0].cts_strs = (const char *) fp->ctf_buf
|
|
|
|
+ hp->cth_stroff;
|
|
|
|
fp->ctf_str[CTF_STRTAB_0].cts_len = hp->cth_strlen;
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* If we have a parent dict name and label, store the relocated string
|
|
|
|
pointers in the CTF dict for easy access later. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Note: before conversion, these will be set to values that will be
|
|
|
|
immediately invalidated by the conversion process, but the conversion
|
|
|
|
process will call ctf_set_base() again to fix things up. */
|
|
|
|
|
|
|
|
if (hp->cth_parlabel != 0)
|
|
|
|
fp->ctf_parlabel = ctf_strptr (fp, hp->cth_parlabel);
|
|
|
|
if (hp->cth_parname != 0)
|
|
|
|
fp->ctf_parname = ctf_strptr (fp, hp->cth_parname);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (hp->cth_cuname != 0)
|
|
|
|
fp->ctf_cuname = ctf_strptr (fp, hp->cth_cuname);
|
|
|
|
|
|
|
|
if (fp->ctf_cuname)
|
|
|
|
ctf_dprintf ("ctf_set_base: CU name %s\n", fp->ctf_cuname);
|
|
|
|
if (fp->ctf_parname)
|
|
|
|
ctf_dprintf ("ctf_set_base: parent name %s (label %s)\n",
|
|
|
|
fp->ctf_parname,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_parlabel ? fp->ctf_parlabel : "<NULL>");
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the version of the CTF file. */
|
|
|
|
|
|
|
|
/* When this is reset, LCTF_* changes behaviour, but there is no guarantee that
|
|
|
|
the variable data list associated with each type has been upgraded: the
|
|
|
|
caller must ensure this has been done in advance. */
|
|
|
|
|
|
|
|
static void
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_set_version (ctf_dict_t *fp, ctf_header_t *cth, int ctf_version)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
fp->ctf_version = ctf_version;
|
|
|
|
cth->cth_version = ctf_version;
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
fp->ctf_dictops = &ctf_dictops[ctf_version];
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|
|
|
|
/* Upgrade the header to CTF_VERSION_3. The upgrade is done in-place. */
|
|
|
|
static void
|
|
|
|
upgrade_header (ctf_header_t *hp)
|
|
|
|
{
|
|
|
|
ctf_header_v2_t *oldhp = (ctf_header_v2_t *) hp;
|
|
|
|
|
|
|
|
hp->cth_strlen = oldhp->cth_strlen;
|
|
|
|
hp->cth_stroff = oldhp->cth_stroff;
|
|
|
|
hp->cth_typeoff = oldhp->cth_typeoff;
|
|
|
|
hp->cth_varoff = oldhp->cth_varoff;
|
2019-07-11 23:21:26 +08:00
|
|
|
hp->cth_funcidxoff = hp->cth_varoff; /* No index sections. */
|
|
|
|
hp->cth_objtidxoff = hp->cth_funcidxoff;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
hp->cth_funcoff = oldhp->cth_funcoff;
|
|
|
|
hp->cth_objtoff = oldhp->cth_objtoff;
|
|
|
|
hp->cth_lbloff = oldhp->cth_lbloff;
|
|
|
|
hp->cth_cuname = 0; /* No CU name. */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Upgrade the type table to CTF_VERSION_3 (really CTF_VERSION_1_UPGRADED_3)
|
|
|
|
from CTF_VERSION_1.
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
The upgrade is not done in-place: the ctf_base is moved. ctf_strptr() must
|
|
|
|
not be called before reallocation is complete.
|
|
|
|
|
2019-07-11 23:21:26 +08:00
|
|
|
Sections not checked here due to nonexistence or nonpopulated state in older
|
|
|
|
formats: objtidx, funcidx.
|
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
Type kinds not checked here due to nonexistence in older formats:
|
|
|
|
CTF_K_SLICE. */
|
|
|
|
static int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
upgrade_types_v1 (ctf_dict_t *fp, ctf_header_t *cth)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
const ctf_type_v1_t *tbuf;
|
|
|
|
const ctf_type_v1_t *tend;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
unsigned char *ctf_base, *old_ctf_base = (unsigned char *) fp->ctf_dynbase;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ctf_type_t *t2buf;
|
|
|
|
|
|
|
|
ssize_t increase = 0, size, increment, v2increment, vbytes, v2bytes;
|
|
|
|
const ctf_type_v1_t *tp;
|
|
|
|
ctf_type_t *t2p;
|
|
|
|
|
|
|
|
tbuf = (ctf_type_v1_t *) (fp->ctf_buf + cth->cth_typeoff);
|
|
|
|
tend = (ctf_type_v1_t *) (fp->ctf_buf + cth->cth_stroff);
|
|
|
|
|
|
|
|
/* Much like init_types(), this is a two-pass process.
|
|
|
|
|
|
|
|
First, figure out the new type-section size needed. (It is possible,
|
|
|
|
in theory, for it to be less than the old size, but this is very
|
|
|
|
unlikely. It cannot be so small that cth_typeoff ends up of negative
|
|
|
|
size. We validate this with an assertion below.)
|
|
|
|
|
|
|
|
We must cater not only for changes in vlen and types sizes but also
|
|
|
|
for changes in 'increment', which happen because v2 places some types
|
|
|
|
into ctf_stype_t where v1 would be forced to use the larger non-stype. */
|
|
|
|
|
|
|
|
for (tp = tbuf; tp < tend;
|
|
|
|
tp = (ctf_type_v1_t *) ((uintptr_t) tp + increment + vbytes))
|
|
|
|
{
|
|
|
|
unsigned short kind = CTF_V1_INFO_KIND (tp->ctt_info);
|
|
|
|
unsigned long vlen = CTF_V1_INFO_VLEN (tp->ctt_info);
|
|
|
|
|
|
|
|
size = get_ctt_size_v1 (fp, (const ctf_type_t *) tp, NULL, &increment);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
vbytes = get_vbytes_v1 (fp, kind, size, vlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
get_ctt_size_v2_unconverted (fp, (const ctf_type_t *) tp, NULL,
|
|
|
|
&v2increment);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
v2bytes = get_vbytes_v2 (fp, kind, size, vlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if ((vbytes < 0) || (size < 0))
|
|
|
|
return ECTF_CORRUPT;
|
|
|
|
|
|
|
|
increase += v2increment - increment; /* May be negative. */
|
|
|
|
increase += v2bytes - vbytes;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Allocate enough room for the new buffer, then copy everything but the type
|
|
|
|
section into place, and reset the base accordingly. Leave the version
|
|
|
|
number unchanged, so that LCTF_INFO_* still works on the
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
as-yet-untranslated type info. */
|
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((ctf_base = malloc (fp->ctf_size + increase)) == NULL)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ECTF_ZALLOC;
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Start at ctf_buf, not ctf_base, to squeeze out the original header: we
|
|
|
|
never use it and it is unconverted. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
memcpy (ctf_base, fp->ctf_buf, cth->cth_typeoff);
|
|
|
|
memcpy (ctf_base + cth->cth_stroff + increase,
|
|
|
|
fp->ctf_buf + cth->cth_stroff, cth->cth_strlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
memset (ctf_base + cth->cth_typeoff, 0, cth->cth_stroff - cth->cth_typeoff
|
|
|
|
+ increase);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
cth->cth_stroff += increase;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_size += increase;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
assert (cth->cth_stroff >= cth->cth_typeoff);
|
|
|
|
fp->ctf_base = ctf_base;
|
|
|
|
fp->ctf_buf = ctf_base;
|
|
|
|
fp->ctf_dynbase = ctf_base;
|
|
|
|
ctf_set_base (fp, cth, ctf_base);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
t2buf = (ctf_type_t *) (fp->ctf_buf + cth->cth_typeoff);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Iterate through all the types again, upgrading them.
|
|
|
|
|
|
|
|
Everything that hasn't changed can just be outright memcpy()ed.
|
|
|
|
Things that have changed need field-by-field consideration. */
|
|
|
|
|
|
|
|
for (tp = tbuf, t2p = t2buf; tp < tend;
|
|
|
|
tp = (ctf_type_v1_t *) ((uintptr_t) tp + increment + vbytes),
|
|
|
|
t2p = (ctf_type_t *) ((uintptr_t) t2p + v2increment + v2bytes))
|
|
|
|
{
|
|
|
|
unsigned short kind = CTF_V1_INFO_KIND (tp->ctt_info);
|
|
|
|
int isroot = CTF_V1_INFO_ISROOT (tp->ctt_info);
|
|
|
|
unsigned long vlen = CTF_V1_INFO_VLEN (tp->ctt_info);
|
|
|
|
ssize_t v2size;
|
|
|
|
void *vdata, *v2data;
|
|
|
|
|
|
|
|
size = get_ctt_size_v1 (fp, (const ctf_type_t *) tp, NULL, &increment);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
vbytes = get_vbytes_v1 (fp, kind, size, vlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
t2p->ctt_name = tp->ctt_name;
|
|
|
|
t2p->ctt_info = CTF_TYPE_INFO (kind, isroot, vlen);
|
|
|
|
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_FUNCTION:
|
|
|
|
case CTF_K_FORWARD:
|
|
|
|
case CTF_K_TYPEDEF:
|
|
|
|
case CTF_K_POINTER:
|
|
|
|
case CTF_K_VOLATILE:
|
|
|
|
case CTF_K_CONST:
|
|
|
|
case CTF_K_RESTRICT:
|
|
|
|
t2p->ctt_type = tp->ctt_type;
|
|
|
|
break;
|
|
|
|
case CTF_K_INTEGER:
|
|
|
|
case CTF_K_FLOAT:
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
case CTF_K_STRUCT:
|
|
|
|
case CTF_K_UNION:
|
|
|
|
case CTF_K_ENUM:
|
|
|
|
case CTF_K_UNKNOWN:
|
libctf: fix a number of build problems found on Solaris and NetBSD
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
2019-05-31 17:10:51 +08:00
|
|
|
if ((size_t) size <= CTF_MAX_SIZE)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
t2p->ctt_size = size;
|
|
|
|
else
|
|
|
|
{
|
|
|
|
t2p->ctt_lsizehi = CTF_SIZE_TO_LSIZE_HI (size);
|
|
|
|
t2p->ctt_lsizelo = CTF_SIZE_TO_LSIZE_LO (size);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
v2size = get_ctt_size_v2 (fp, t2p, NULL, &v2increment);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
v2bytes = get_vbytes_v2 (fp, kind, v2size, vlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Catch out-of-sync get_ctt_size_*(). The count goes wrong if
|
|
|
|
these are not identical (and having them different makes no
|
|
|
|
sense semantically). */
|
|
|
|
|
|
|
|
assert (size == v2size);
|
|
|
|
|
|
|
|
/* Now the varlen info. */
|
|
|
|
|
|
|
|
vdata = (void *) ((uintptr_t) tp + increment);
|
|
|
|
v2data = (void *) ((uintptr_t) t2p + v2increment);
|
|
|
|
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
{
|
|
|
|
const ctf_array_v1_t *ap = (const ctf_array_v1_t *) vdata;
|
|
|
|
ctf_array_t *a2p = (ctf_array_t *) v2data;
|
|
|
|
|
|
|
|
a2p->cta_contents = ap->cta_contents;
|
|
|
|
a2p->cta_index = ap->cta_index;
|
|
|
|
a2p->cta_nelems = ap->cta_nelems;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case CTF_K_STRUCT:
|
|
|
|
case CTF_K_UNION:
|
|
|
|
{
|
|
|
|
ctf_member_t tmp;
|
|
|
|
const ctf_member_v1_t *m1 = (const ctf_member_v1_t *) vdata;
|
|
|
|
const ctf_lmember_v1_t *lm1 = (const ctf_lmember_v1_t *) m1;
|
|
|
|
ctf_member_t *m2 = (ctf_member_t *) v2data;
|
|
|
|
ctf_lmember_t *lm2 = (ctf_lmember_t *) m2;
|
|
|
|
unsigned long i;
|
|
|
|
|
|
|
|
/* We walk all four pointers forward, but only reference the two
|
|
|
|
that are valid for the given size, to avoid quadruplicating all
|
|
|
|
the code. */
|
|
|
|
|
|
|
|
for (i = vlen; i != 0; i--, m1++, lm1++, m2++, lm2++)
|
|
|
|
{
|
|
|
|
size_t offset;
|
|
|
|
if (size < CTF_LSTRUCT_THRESH_V1)
|
|
|
|
{
|
|
|
|
offset = m1->ctm_offset;
|
|
|
|
tmp.ctm_name = m1->ctm_name;
|
|
|
|
tmp.ctm_type = m1->ctm_type;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
offset = CTF_LMEM_OFFSET (lm1);
|
|
|
|
tmp.ctm_name = lm1->ctlm_name;
|
|
|
|
tmp.ctm_type = lm1->ctlm_type;
|
|
|
|
}
|
|
|
|
if (size < CTF_LSTRUCT_THRESH)
|
|
|
|
{
|
|
|
|
m2->ctm_name = tmp.ctm_name;
|
|
|
|
m2->ctm_type = tmp.ctm_type;
|
|
|
|
m2->ctm_offset = offset;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
lm2->ctlm_name = tmp.ctm_name;
|
|
|
|
lm2->ctlm_type = tmp.ctm_type;
|
|
|
|
lm2->ctlm_offsethi = CTF_OFFSET_TO_LMEMHI (offset);
|
|
|
|
lm2->ctlm_offsetlo = CTF_OFFSET_TO_LMEMLO (offset);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case CTF_K_FUNCTION:
|
|
|
|
{
|
|
|
|
unsigned long i;
|
|
|
|
unsigned short *a1 = (unsigned short *) vdata;
|
|
|
|
uint32_t *a2 = (uint32_t *) v2data;
|
|
|
|
|
|
|
|
for (i = vlen; i != 0; i--, a1++, a2++)
|
|
|
|
*a2 = *a1;
|
|
|
|
}
|
|
|
|
/* FALLTHRU */
|
|
|
|
default:
|
|
|
|
/* Catch out-of-sync get_vbytes_*(). */
|
|
|
|
assert (vbytes == v2bytes);
|
|
|
|
memcpy (v2data, vdata, vbytes);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Verify that the entire region was converted. If not, we are either
|
|
|
|
converting too much, or too little (leading to a buffer overrun either here
|
|
|
|
or at read time, in init_types().) */
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
assert ((size_t) t2p - (size_t) fp->ctf_buf == cth->cth_stroff);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_version (fp, cth, CTF_VERSION_1_UPGRADED_3);
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (old_ctf_base);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Upgrade from any earlier version. */
|
|
|
|
static int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
upgrade_types (ctf_dict_t *fp, ctf_header_t *cth)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
switch (cth->cth_version)
|
|
|
|
{
|
|
|
|
/* v1 requires a full pass and reformatting. */
|
|
|
|
case CTF_VERSION_1:
|
|
|
|
upgrade_types_v1 (fp, cth);
|
|
|
|
/* FALLTHRU */
|
|
|
|
/* Already-converted v1 is just like later versions except that its
|
|
|
|
parent/child boundary is unchanged (and much lower). */
|
|
|
|
|
|
|
|
case CTF_VERSION_1_UPGRADED_3:
|
|
|
|
fp->ctf_parmax = CTF_MAX_PTYPE_V1;
|
|
|
|
|
|
|
|
/* v2 is just the same as v3 except for new types and sections:
|
|
|
|
no upgrading required. */
|
|
|
|
case CTF_VERSION_2: ;
|
|
|
|
/* FALLTHRU */
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
/* Initialize the type ID translation table with the byte offset of each type,
|
|
|
|
and initialize the hash tables of each named type. Upgrade the type table to
|
|
|
|
the latest supported representation in the process, if needed, and if this
|
|
|
|
recension of libctf supports upgrading. */
|
|
|
|
|
|
|
|
static int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
init_types (ctf_dict_t *fp, ctf_header_t *cth)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
const ctf_type_t *tbuf;
|
|
|
|
const ctf_type_t *tend;
|
|
|
|
|
|
|
|
unsigned long pop[CTF_K_MAX + 1] = { 0 };
|
|
|
|
const ctf_type_t *tp;
|
2021-01-28 03:41:49 +08:00
|
|
|
uint32_t id;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
uint32_t *xp;
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* We determine whether the dict is a child or a parent based on the value of
|
|
|
|
cth_parname. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
int child = cth->cth_parname != 0;
|
|
|
|
int nlstructs = 0, nlunions = 0;
|
|
|
|
int err;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
assert (!(fp->ctf_flags & LCTF_RDWR));
|
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
if (_libctf_unlikely_ (fp->ctf_version == CTF_VERSION_1))
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
if ((err = upgrade_types (fp, cth)) != 0)
|
|
|
|
return err; /* Upgrade failed. */
|
|
|
|
}
|
|
|
|
|
|
|
|
tbuf = (ctf_type_t *) (fp->ctf_buf + cth->cth_typeoff);
|
|
|
|
tend = (ctf_type_t *) (fp->ctf_buf + cth->cth_stroff);
|
|
|
|
|
|
|
|
/* We make two passes through the entire type section. In this first
|
|
|
|
pass, we count the number of each type and the total number of types. */
|
|
|
|
|
|
|
|
for (tp = tbuf; tp < tend; fp->ctf_typemax++)
|
|
|
|
{
|
|
|
|
unsigned short kind = LCTF_INFO_KIND (fp, tp->ctt_info);
|
|
|
|
unsigned long vlen = LCTF_INFO_VLEN (fp, tp->ctt_info);
|
|
|
|
ssize_t size, increment, vbytes;
|
|
|
|
|
|
|
|
(void) ctf_get_ctt_size (fp, tp, &size, &increment);
|
|
|
|
vbytes = LCTF_VBYTES (fp, kind, size, vlen);
|
|
|
|
|
|
|
|
if (vbytes < 0)
|
|
|
|
return ECTF_CORRUPT;
|
|
|
|
|
2020-06-03 03:26:29 +08:00
|
|
|
/* For forward declarations, ctt_type is the CTF_K_* kind for the tag,
|
|
|
|
so bump that population count too. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
if (kind == CTF_K_FORWARD)
|
2020-06-03 03:26:29 +08:00
|
|
|
pop[tp->ctt_type]++;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
tp = (ctf_type_t *) ((uintptr_t) tp + increment + vbytes);
|
|
|
|
pop[kind]++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (child)
|
|
|
|
{
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dprintf ("CTF dict %p is a child\n", (void *) fp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_flags |= LCTF_CHILD;
|
|
|
|
}
|
|
|
|
else
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dprintf ("CTF dict %p is a parent\n", (void *) fp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Now that we've counted up the number of each type, we can allocate
|
|
|
|
the hash tables, type translation table, and pointer table. */
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if ((fp->ctf_structs.ctn_readonly
|
|
|
|
= ctf_hash_create (pop[CTF_K_STRUCT], ctf_hash_string,
|
|
|
|
ctf_hash_eq_string)) == NULL)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ENOMEM;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if ((fp->ctf_unions.ctn_readonly
|
|
|
|
= ctf_hash_create (pop[CTF_K_UNION], ctf_hash_string,
|
|
|
|
ctf_hash_eq_string)) == NULL)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ENOMEM;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if ((fp->ctf_enums.ctn_readonly
|
|
|
|
= ctf_hash_create (pop[CTF_K_ENUM], ctf_hash_string,
|
|
|
|
ctf_hash_eq_string)) == NULL)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ENOMEM;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if ((fp->ctf_names.ctn_readonly
|
|
|
|
= ctf_hash_create (pop[CTF_K_INTEGER] +
|
|
|
|
pop[CTF_K_FLOAT] +
|
|
|
|
pop[CTF_K_FUNCTION] +
|
|
|
|
pop[CTF_K_TYPEDEF] +
|
|
|
|
pop[CTF_K_POINTER] +
|
|
|
|
pop[CTF_K_VOLATILE] +
|
|
|
|
pop[CTF_K_CONST] +
|
|
|
|
pop[CTF_K_RESTRICT],
|
|
|
|
ctf_hash_string,
|
|
|
|
ctf_hash_eq_string)) == NULL)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ENOMEM;
|
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
fp->ctf_txlate = malloc (sizeof (uint32_t) * (fp->ctf_typemax + 1));
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
fp->ctf_ptrtab_len = fp->ctf_typemax + 1;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
fp->ctf_ptrtab = malloc (sizeof (uint32_t) * fp->ctf_ptrtab_len);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp->ctf_txlate == NULL || fp->ctf_ptrtab == NULL)
|
|
|
|
return ENOMEM; /* Memory allocation failed. */
|
|
|
|
|
|
|
|
xp = fp->ctf_txlate;
|
|
|
|
*xp++ = 0; /* Type id 0 is used as a sentinel value. */
|
|
|
|
|
|
|
|
memset (fp->ctf_txlate, 0, sizeof (uint32_t) * (fp->ctf_typemax + 1));
|
|
|
|
memset (fp->ctf_ptrtab, 0, sizeof (uint32_t) * (fp->ctf_typemax + 1));
|
|
|
|
|
|
|
|
/* In the second pass through the types, we fill in each entry of the
|
|
|
|
type and pointer tables and add names to the appropriate hashes. */
|
|
|
|
|
|
|
|
for (id = 1, tp = tbuf; tp < tend; xp++, id++)
|
|
|
|
{
|
|
|
|
unsigned short kind = LCTF_INFO_KIND (fp, tp->ctt_info);
|
2019-10-21 18:27:43 +08:00
|
|
|
unsigned short isroot = LCTF_INFO_ISROOT (fp, tp->ctt_info);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
unsigned long vlen = LCTF_INFO_VLEN (fp, tp->ctt_info);
|
|
|
|
ssize_t size, increment, vbytes;
|
|
|
|
|
|
|
|
const char *name;
|
|
|
|
|
|
|
|
(void) ctf_get_ctt_size (fp, tp, &size, &increment);
|
|
|
|
name = ctf_strptr (fp, tp->ctt_name);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
/* Cannot fail: shielded by call in loop above. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
vbytes = LCTF_VBYTES (fp, kind, size, vlen);
|
|
|
|
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_INTEGER:
|
|
|
|
case CTF_K_FLOAT:
|
|
|
|
/* Names are reused by bit-fields, which are differentiated by their
|
|
|
|
encodings, and so typically we'd record only the first instance of
|
|
|
|
a given intrinsic. However, we replace an existing type with a
|
|
|
|
root-visible version so that we can be sure to find it when
|
|
|
|
checking for conflicting definitions in ctf_add_type(). */
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if (((ctf_hash_lookup_type (fp->ctf_names.ctn_readonly,
|
|
|
|
fp, name)) == 0)
|
2019-10-21 18:27:43 +08:00
|
|
|
|| isroot)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_define_type (fp->ctf_names.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* These kinds have no name, so do not need interning into any
|
|
|
|
hashtables. */
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
case CTF_K_SLICE:
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_FUNCTION:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_insert_type (fp->ctf_names.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_STRUCT:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (size >= CTF_LSTRUCT_THRESH)
|
|
|
|
nlstructs++;
|
|
|
|
|
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_define_type (fp->ctf_structs.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
|
|
|
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_UNION:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (size >= CTF_LSTRUCT_THRESH)
|
|
|
|
nlunions++;
|
|
|
|
|
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_define_type (fp->ctf_unions.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
|
|
|
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_ENUM:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_define_type (fp->ctf_enums.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
|
|
|
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_TYPEDEF:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_insert_type (fp->ctf_names.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_FORWARD:
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
{
|
|
|
|
ctf_names_t *np = ctf_name_table (fp, tp->ctt_type);
|
2019-10-21 18:27:43 +08:00
|
|
|
|
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
/* Only insert forward tags into the given hash if the type or tag
|
|
|
|
name is not already present. */
|
|
|
|
if (ctf_hash_lookup_type (np->ctn_readonly, fp, name) == 0)
|
|
|
|
{
|
|
|
|
err = ctf_hash_insert_type (np->ctn_readonly, fp,
|
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
|
|
|
if (err != 0)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
case CTF_K_POINTER:
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* If the type referenced by the pointer is in this CTF dict, then
|
|
|
|
store the index of the pointer type in fp->ctf_ptrtab[ index of
|
|
|
|
referenced type ]. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (LCTF_TYPE_ISCHILD (fp, tp->ctt_type) == child
|
|
|
|
&& LCTF_TYPE_TO_INDEX (fp, tp->ctt_type) <= fp->ctf_typemax)
|
|
|
|
fp->ctf_ptrtab[LCTF_TYPE_TO_INDEX (fp, tp->ctt_type)] = id;
|
|
|
|
/*FALLTHRU*/
|
|
|
|
|
|
|
|
case CTF_K_VOLATILE:
|
|
|
|
case CTF_K_CONST:
|
|
|
|
case CTF_K_RESTRICT:
|
2019-10-21 18:27:43 +08:00
|
|
|
if (!isroot)
|
|
|
|
break;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
err = ctf_hash_insert_type (fp->ctf_names.ctn_readonly, fp,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
LCTF_INDEX_TO_TYPE (fp, id, child),
|
|
|
|
tp->ctt_name);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if (err != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return err;
|
|
|
|
break;
|
2019-06-19 19:27:18 +08:00
|
|
|
default:
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_err_warn (fp, 0, ECTF_CORRUPT,
|
|
|
|
_("init_types(): unhandled CTF kind: %x"), kind);
|
2019-06-19 19:27:18 +08:00
|
|
|
return ECTF_CORRUPT;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
*xp = (uint32_t) ((uintptr_t) tp - (uintptr_t) fp->ctf_buf);
|
|
|
|
tp = (ctf_type_t *) ((uintptr_t) tp + increment + vbytes);
|
|
|
|
}
|
|
|
|
|
|
|
|
ctf_dprintf ("%lu total types processed\n", fp->ctf_typemax);
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_dprintf ("%u enum names hashed\n",
|
|
|
|
ctf_hash_size (fp->ctf_enums.ctn_readonly));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ctf_dprintf ("%u struct names hashed (%d long)\n",
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_hash_size (fp->ctf_structs.ctn_readonly), nlstructs);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ctf_dprintf ("%u union names hashed (%d long)\n",
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_hash_size (fp->ctf_unions.ctn_readonly), nlunions);
|
|
|
|
ctf_dprintf ("%u base type names hashed\n",
|
|
|
|
ctf_hash_size (fp->ctf_names.ctn_readonly));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Endianness-flipping routines.
|
|
|
|
|
|
|
|
We flip everything, mindlessly, even 1-byte entities, so that future
|
|
|
|
expansions do not require changes to this code. */
|
|
|
|
|
|
|
|
/* Flip the endianness of the CTF header. */
|
|
|
|
|
|
|
|
static void
|
|
|
|
flip_header (ctf_header_t *cth)
|
|
|
|
{
|
|
|
|
swap_thing (cth->cth_preamble.ctp_magic);
|
|
|
|
swap_thing (cth->cth_preamble.ctp_version);
|
|
|
|
swap_thing (cth->cth_preamble.ctp_flags);
|
|
|
|
swap_thing (cth->cth_parlabel);
|
|
|
|
swap_thing (cth->cth_parname);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
swap_thing (cth->cth_cuname);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
swap_thing (cth->cth_objtoff);
|
|
|
|
swap_thing (cth->cth_funcoff);
|
2019-07-11 23:21:26 +08:00
|
|
|
swap_thing (cth->cth_objtidxoff);
|
|
|
|
swap_thing (cth->cth_funcidxoff);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
swap_thing (cth->cth_varoff);
|
|
|
|
swap_thing (cth->cth_typeoff);
|
|
|
|
swap_thing (cth->cth_stroff);
|
|
|
|
swap_thing (cth->cth_strlen);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flip the endianness of the label section, an array of ctf_lblent_t. */
|
|
|
|
|
|
|
|
static void
|
|
|
|
flip_lbls (void *start, size_t len)
|
|
|
|
{
|
|
|
|
ctf_lblent_t *lbl = start;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
2019-07-26 02:59:32 +08:00
|
|
|
for (i = len / sizeof (struct ctf_lblent); i > 0; lbl++, i--)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
swap_thing (lbl->ctl_label);
|
|
|
|
swap_thing (lbl->ctl_type);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-07-11 23:21:26 +08:00
|
|
|
/* Flip the endianness of the data-object or function sections or their indexes,
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
all arrays of uint32_t. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
static void
|
|
|
|
flip_objts (void *start, size_t len)
|
|
|
|
{
|
|
|
|
uint32_t *obj = start;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
2019-07-26 02:59:32 +08:00
|
|
|
for (i = len / sizeof (uint32_t); i > 0; obj++, i--)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
swap_thing (*obj);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flip the endianness of the variable section, an array of ctf_varent_t. */
|
|
|
|
|
|
|
|
static void
|
|
|
|
flip_vars (void *start, size_t len)
|
|
|
|
{
|
|
|
|
ctf_varent_t *var = start;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
2019-07-26 02:59:32 +08:00
|
|
|
for (i = len / sizeof (struct ctf_varent); i > 0; var++, i--)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
swap_thing (var->ctv_name);
|
|
|
|
swap_thing (var->ctv_type);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flip the endianness of the type section, a tagged array of ctf_type or
|
|
|
|
ctf_stype followed by variable data. */
|
|
|
|
|
|
|
|
static int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
flip_types (ctf_dict_t *fp, void *start, size_t len)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
ctf_type_t *t = start;
|
|
|
|
|
|
|
|
while ((uintptr_t) t < ((uintptr_t) start) + len)
|
|
|
|
{
|
|
|
|
swap_thing (t->ctt_name);
|
|
|
|
swap_thing (t->ctt_info);
|
|
|
|
swap_thing (t->ctt_size);
|
|
|
|
|
|
|
|
uint32_t kind = CTF_V2_INFO_KIND (t->ctt_info);
|
|
|
|
size_t size = t->ctt_size;
|
|
|
|
uint32_t vlen = CTF_V2_INFO_VLEN (t->ctt_info);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
size_t vbytes = get_vbytes_v2 (fp, kind, size, vlen);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (_libctf_unlikely_ (size == CTF_LSIZE_SENT))
|
|
|
|
{
|
|
|
|
swap_thing (t->ctt_lsizehi);
|
|
|
|
swap_thing (t->ctt_lsizelo);
|
|
|
|
size = CTF_TYPE_LSIZE (t);
|
|
|
|
t = (ctf_type_t *) ((uintptr_t) t + sizeof (ctf_type_t));
|
|
|
|
}
|
|
|
|
else
|
|
|
|
t = (ctf_type_t *) ((uintptr_t) t + sizeof (ctf_stype_t));
|
|
|
|
|
|
|
|
switch (kind)
|
|
|
|
{
|
|
|
|
case CTF_K_FORWARD:
|
|
|
|
case CTF_K_UNKNOWN:
|
|
|
|
case CTF_K_POINTER:
|
|
|
|
case CTF_K_TYPEDEF:
|
|
|
|
case CTF_K_VOLATILE:
|
|
|
|
case CTF_K_CONST:
|
|
|
|
case CTF_K_RESTRICT:
|
|
|
|
/* These types have no vlen data to swap. */
|
|
|
|
assert (vbytes == 0);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CTF_K_INTEGER:
|
|
|
|
case CTF_K_FLOAT:
|
|
|
|
{
|
|
|
|
/* These types have a single uint32_t. */
|
|
|
|
|
|
|
|
uint32_t *item = (uint32_t *) t;
|
|
|
|
|
|
|
|
swap_thing (*item);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
case CTF_K_FUNCTION:
|
|
|
|
{
|
|
|
|
/* This type has a bunch of uint32_ts. */
|
|
|
|
|
|
|
|
uint32_t *item = (uint32_t *) t;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
2019-07-26 02:59:32 +08:00
|
|
|
for (i = vlen; i > 0; item++, i--)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
swap_thing (*item);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
case CTF_K_ARRAY:
|
|
|
|
{
|
|
|
|
/* This has a single ctf_array_t. */
|
|
|
|
|
|
|
|
ctf_array_t *a = (ctf_array_t *) t;
|
|
|
|
|
|
|
|
assert (vbytes == sizeof (ctf_array_t));
|
|
|
|
swap_thing (a->cta_contents);
|
|
|
|
swap_thing (a->cta_index);
|
|
|
|
swap_thing (a->cta_nelems);
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
case CTF_K_SLICE:
|
|
|
|
{
|
|
|
|
/* This has a single ctf_slice_t. */
|
|
|
|
|
|
|
|
ctf_slice_t *s = (ctf_slice_t *) t;
|
|
|
|
|
|
|
|
assert (vbytes == sizeof (ctf_slice_t));
|
|
|
|
swap_thing (s->cts_type);
|
|
|
|
swap_thing (s->cts_offset);
|
|
|
|
swap_thing (s->cts_bits);
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
case CTF_K_STRUCT:
|
|
|
|
case CTF_K_UNION:
|
|
|
|
{
|
|
|
|
/* This has an array of ctf_member or ctf_lmember, depending on
|
|
|
|
size. We could consider it to be a simple array of uint32_t,
|
|
|
|
but for safety's sake in case these structures ever acquire
|
|
|
|
non-uint32_t members, do it member by member. */
|
|
|
|
|
|
|
|
if (_libctf_unlikely_ (size >= CTF_LSTRUCT_THRESH))
|
|
|
|
{
|
|
|
|
ctf_lmember_t *lm = (ctf_lmember_t *) t;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
|
|
|
for (i = vlen; i > 0; i--, lm++)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
swap_thing (lm->ctlm_name);
|
|
|
|
swap_thing (lm->ctlm_offsethi);
|
|
|
|
swap_thing (lm->ctlm_type);
|
|
|
|
swap_thing (lm->ctlm_offsetlo);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
ctf_member_t *m = (ctf_member_t *) t;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
|
|
|
for (i = vlen; i > 0; i--, m++)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
swap_thing (m->ctm_name);
|
|
|
|
swap_thing (m->ctm_offset);
|
|
|
|
swap_thing (m->ctm_type);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
case CTF_K_ENUM:
|
|
|
|
{
|
|
|
|
/* This has an array of ctf_enum_t. */
|
|
|
|
|
|
|
|
ctf_enum_t *item = (ctf_enum_t *) t;
|
2019-07-26 02:59:32 +08:00
|
|
|
ssize_t i;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
2019-07-26 02:59:32 +08:00
|
|
|
for (i = vlen; i > 0; item++, i--)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
swap_thing (item->cte_name);
|
|
|
|
swap_thing (item->cte_value);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
default:
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_err_warn (fp, 0, ECTF_CORRUPT,
|
|
|
|
_("unhandled CTF kind in endianness conversion: %x"),
|
|
|
|
kind);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return ECTF_CORRUPT;
|
|
|
|
}
|
|
|
|
|
|
|
|
t = (ctf_type_t *) ((uintptr_t) t + vbytes);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Flip the endianness of BUF, given the offsets in the (already endian-
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
converted) CTH.
|
|
|
|
|
|
|
|
All of this stuff happens before the header is fully initialized, so the
|
|
|
|
LCTF_*() macros cannot be used yet. Since we do not try to endian-convert v1
|
|
|
|
data, this is no real loss. */
|
|
|
|
|
|
|
|
static int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
flip_ctf (ctf_dict_t *fp, ctf_header_t *cth, unsigned char *buf)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
flip_lbls (buf + cth->cth_lbloff, cth->cth_objtoff - cth->cth_lbloff);
|
|
|
|
flip_objts (buf + cth->cth_objtoff, cth->cth_funcoff - cth->cth_objtoff);
|
2019-07-11 23:21:26 +08:00
|
|
|
flip_objts (buf + cth->cth_funcoff, cth->cth_objtidxoff - cth->cth_funcoff);
|
|
|
|
flip_objts (buf + cth->cth_objtidxoff, cth->cth_funcidxoff - cth->cth_objtidxoff);
|
|
|
|
flip_objts (buf + cth->cth_funcidxoff, cth->cth_varoff - cth->cth_funcidxoff);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
flip_vars (buf + cth->cth_varoff, cth->cth_typeoff - cth->cth_varoff);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
return flip_types (fp, buf + cth->cth_typeoff, cth->cth_stroff - cth->cth_typeoff);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Set up the ctl hashes in a ctf_dict_t. Called by both writable and
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
non-writable dictionary initialization. */
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
void ctf_set_ctl_hashes (ctf_dict_t *fp)
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
{
|
|
|
|
/* Initialize the ctf_lookup_by_name top-level dictionary. We keep an
|
|
|
|
array of type name prefixes and the corresponding ctf_hash to use. */
|
|
|
|
fp->ctf_lookups[0].ctl_prefix = "struct";
|
|
|
|
fp->ctf_lookups[0].ctl_len = strlen (fp->ctf_lookups[0].ctl_prefix);
|
|
|
|
fp->ctf_lookups[0].ctl_hash = &fp->ctf_structs;
|
|
|
|
fp->ctf_lookups[1].ctl_prefix = "union";
|
|
|
|
fp->ctf_lookups[1].ctl_len = strlen (fp->ctf_lookups[1].ctl_prefix);
|
|
|
|
fp->ctf_lookups[1].ctl_hash = &fp->ctf_unions;
|
|
|
|
fp->ctf_lookups[2].ctl_prefix = "enum";
|
|
|
|
fp->ctf_lookups[2].ctl_len = strlen (fp->ctf_lookups[2].ctl_prefix);
|
|
|
|
fp->ctf_lookups[2].ctl_hash = &fp->ctf_enums;
|
|
|
|
fp->ctf_lookups[3].ctl_prefix = _CTF_NULLSTR;
|
|
|
|
fp->ctf_lookups[3].ctl_len = strlen (fp->ctf_lookups[3].ctl_prefix);
|
|
|
|
fp->ctf_lookups[3].ctl_hash = &fp->ctf_names;
|
|
|
|
fp->ctf_lookups[4].ctl_prefix = NULL;
|
|
|
|
fp->ctf_lookups[4].ctl_len = 0;
|
|
|
|
fp->ctf_lookups[4].ctl_hash = NULL;
|
|
|
|
}
|
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
/* Open a CTF file, mocking up a suitable ctf_sect. */
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_t *ctf_simple_open (const char *ctfsect, size_t ctfsect_size,
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
const char *symsect, size_t symsect_size,
|
|
|
|
size_t symsect_entsize,
|
|
|
|
const char *strsect, size_t strsect_size,
|
|
|
|
int *errp)
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
{
|
|
|
|
return ctf_simple_open_internal (ctfsect, ctfsect_size, symsect, symsect_size,
|
|
|
|
symsect_entsize, strsect, strsect_size, NULL,
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
0, errp);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Open a CTF file, mocking up a suitable ctf_sect and overriding the external
|
|
|
|
strtab with a synthetic one. */
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_t *ctf_simple_open_internal (const char *ctfsect, size_t ctfsect_size,
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
const char *symsect, size_t symsect_size,
|
|
|
|
size_t symsect_entsize,
|
|
|
|
const char *strsect, size_t strsect_size,
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_dynhash_t *syn_strtab, int writable,
|
|
|
|
int *errp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
ctf_sect_t skeleton;
|
|
|
|
|
|
|
|
ctf_sect_t ctf_sect, sym_sect, str_sect;
|
|
|
|
ctf_sect_t *ctfsectp = NULL;
|
|
|
|
ctf_sect_t *symsectp = NULL;
|
|
|
|
ctf_sect_t *strsectp = NULL;
|
|
|
|
|
|
|
|
skeleton.cts_name = _CTF_SECTION;
|
|
|
|
skeleton.cts_entsize = 1;
|
|
|
|
|
|
|
|
if (ctfsect)
|
|
|
|
{
|
|
|
|
memcpy (&ctf_sect, &skeleton, sizeof (struct ctf_sect));
|
|
|
|
ctf_sect.cts_data = ctfsect;
|
|
|
|
ctf_sect.cts_size = ctfsect_size;
|
|
|
|
ctfsectp = &ctf_sect;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (symsect)
|
|
|
|
{
|
|
|
|
memcpy (&sym_sect, &skeleton, sizeof (struct ctf_sect));
|
|
|
|
sym_sect.cts_data = symsect;
|
|
|
|
sym_sect.cts_size = symsect_size;
|
|
|
|
sym_sect.cts_entsize = symsect_entsize;
|
|
|
|
symsectp = &sym_sect;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (strsect)
|
|
|
|
{
|
|
|
|
memcpy (&str_sect, &skeleton, sizeof (struct ctf_sect));
|
|
|
|
str_sect.cts_data = strsect;
|
|
|
|
str_sect.cts_size = strsect_size;
|
|
|
|
strsectp = &str_sect;
|
|
|
|
}
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
return ctf_bufopen_internal (ctfsectp, symsectp, strsectp, syn_strtab,
|
|
|
|
writable, errp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Decode the specified CTF buffer and optional symbol table, and create a new
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
CTF dict representing the symbolic debugging information. This code can
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
be used directly by the debugger, or it can be used as the engine for
|
|
|
|
ctf_fdopen() or ctf_open(), below. */
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_t *
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
ctf_bufopen (const ctf_sect_t *ctfsect, const ctf_sect_t *symsect,
|
|
|
|
const ctf_sect_t *strsect, int *errp)
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
{
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
return ctf_bufopen_internal (ctfsect, symsect, strsect, NULL, 0, errp);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Like ctf_bufopen, but overriding the external strtab with a synthetic one. */
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_t *
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
ctf_bufopen_internal (const ctf_sect_t *ctfsect, const ctf_sect_t *symsect,
|
|
|
|
const ctf_sect_t *strsect, ctf_dynhash_t *syn_strtab,
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
int writable, int *errp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
const ctf_preamble_t *pp;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
size_t hdrsz = sizeof (ctf_header_t);
|
|
|
|
ctf_header_t *hp;
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_t *fp;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
int foreign_endian = 0;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
libctf_init_debug();
|
|
|
|
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
if ((ctfsect == NULL) || ((symsect != NULL) &&
|
|
|
|
((strsect == NULL) && syn_strtab == NULL)))
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return (ctf_set_open_errno (errp, EINVAL));
|
|
|
|
|
|
|
|
if (symsect != NULL && symsect->cts_entsize != sizeof (Elf32_Sym) &&
|
|
|
|
symsect->cts_entsize != sizeof (Elf64_Sym))
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_SYMTAB));
|
|
|
|
|
|
|
|
if (symsect != NULL && symsect->cts_data == NULL)
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_SYMBAD));
|
|
|
|
|
|
|
|
if (strsect != NULL && strsect->cts_data == NULL)
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_STRBAD));
|
|
|
|
|
|
|
|
if (ctfsect->cts_size < sizeof (ctf_preamble_t))
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_NOCTFBUF));
|
|
|
|
|
|
|
|
pp = (const ctf_preamble_t *) ctfsect->cts_data;
|
|
|
|
|
|
|
|
ctf_dprintf ("ctf_bufopen: magic=0x%x version=%u\n",
|
|
|
|
pp->ctp_magic, pp->ctp_version);
|
|
|
|
|
|
|
|
/* Validate each part of the CTF header.
|
|
|
|
|
|
|
|
First, we validate the preamble (common to all versions). At that point,
|
|
|
|
we know the endianness and specific header version, and can validate the
|
|
|
|
version-specific parts including section offsets and alignments.
|
|
|
|
|
|
|
|
We specifically do not support foreign-endian old versions. */
|
|
|
|
|
|
|
|
if (_libctf_unlikely_ (pp->ctp_magic != CTF_MAGIC))
|
|
|
|
{
|
|
|
|
if (pp->ctp_magic == bswap_16 (CTF_MAGIC))
|
|
|
|
{
|
|
|
|
if (pp->ctp_version != CTF_VERSION_3)
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CTFVERS));
|
|
|
|
foreign_endian = 1;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_NOCTFBUF));
|
|
|
|
}
|
|
|
|
|
|
|
|
if (_libctf_unlikely_ ((pp->ctp_version < CTF_VERSION_1)
|
|
|
|
|| (pp->ctp_version > CTF_VERSION_3)))
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CTFVERS));
|
|
|
|
|
|
|
|
if ((symsect != NULL) && (pp->ctp_version < CTF_VERSION_2))
|
|
|
|
{
|
|
|
|
/* The symtab can contain function entries which contain embedded ctf
|
|
|
|
info. We do not support dynamically upgrading such entries (none
|
|
|
|
should exist in any case, since dwarf2ctf does not create them). */
|
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_err_warn (NULL, 0, ECTF_NOTSUP, _("ctf_bufopen: CTF version %d "
|
|
|
|
"symsect not supported"),
|
|
|
|
pp->ctp_version);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return (ctf_set_open_errno (errp, ECTF_NOTSUP));
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (pp->ctp_version < CTF_VERSION_3)
|
|
|
|
hdrsz = sizeof (ctf_header_v2_t);
|
|
|
|
|
2020-06-04 00:31:44 +08:00
|
|
|
if (_libctf_unlikely_ (pp->ctp_flags > CTF_F_MAX))
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_FLAGS, _("ctf_bufopen: invalid header "
|
|
|
|
"flags: %x"),
|
|
|
|
(unsigned int) pp->ctp_flags);
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_FLAGS));
|
|
|
|
}
|
2020-06-04 00:31:44 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (ctfsect->cts_size < hdrsz)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return (ctf_set_open_errno (errp, ECTF_NOCTFBUF));
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
if ((fp = malloc (sizeof (ctf_dict_t))) == NULL)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
return (ctf_set_open_errno (errp, ENOMEM));
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
memset (fp, 0, sizeof (ctf_dict_t));
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if (writable)
|
|
|
|
fp->ctf_flags |= LCTF_RDWR;
|
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_header = malloc (sizeof (struct ctf_header))) == NULL)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
return (ctf_set_open_errno (errp, ENOMEM));
|
|
|
|
}
|
|
|
|
hp = fp->ctf_header;
|
|
|
|
memcpy (hp, ctfsect->cts_data, hdrsz);
|
|
|
|
if (pp->ctp_version < CTF_VERSION_3)
|
|
|
|
upgrade_header (hp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (foreign_endian)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
flip_header (hp);
|
2019-07-08 20:59:15 +08:00
|
|
|
fp->ctf_openflags = hp->cth_flags;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
fp->ctf_size = hp->cth_stroff + hp->cth_strlen;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_dprintf ("ctf_bufopen: uncompressed size=%lu\n",
|
|
|
|
(unsigned long) fp->ctf_size);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (hp->cth_lbloff > fp->ctf_size || hp->cth_objtoff > fp->ctf_size
|
2019-07-11 23:21:26 +08:00
|
|
|
|| hp->cth_funcoff > fp->ctf_size || hp->cth_objtidxoff > fp->ctf_size
|
|
|
|
|| hp->cth_funcidxoff > fp->ctf_size || hp->cth_typeoff > fp->ctf_size
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|| hp->cth_stroff > fp->ctf_size)
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT, _("header offset exceeds CTF size"));
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CORRUPT));
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (hp->cth_lbloff > hp->cth_objtoff
|
|
|
|
|| hp->cth_objtoff > hp->cth_funcoff
|
|
|
|
|| hp->cth_funcoff > hp->cth_typeoff
|
2019-07-11 23:21:26 +08:00
|
|
|
|| hp->cth_funcoff > hp->cth_objtidxoff
|
|
|
|
|| hp->cth_objtidxoff > hp->cth_funcidxoff
|
|
|
|
|| hp->cth_funcidxoff > hp->cth_varoff
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|| hp->cth_varoff > hp->cth_typeoff || hp->cth_typeoff > hp->cth_stroff)
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT, _("overlapping CTF sections"));
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CORRUPT));
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if ((hp->cth_lbloff & 3) || (hp->cth_objtoff & 2)
|
2019-07-11 23:21:26 +08:00
|
|
|
|| (hp->cth_funcoff & 2) || (hp->cth_objtidxoff & 2)
|
|
|
|
|| (hp->cth_funcidxoff & 2) || (hp->cth_varoff & 3)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|| (hp->cth_typeoff & 3))
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT,
|
|
|
|
_("CTF sections not properly aligned"));
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CORRUPT));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This invariant will be lifted in v4, but for now it is true. */
|
|
|
|
|
|
|
|
if ((hp->cth_funcidxoff - hp->cth_objtidxoff != 0) &&
|
|
|
|
(hp->cth_funcidxoff - hp->cth_objtidxoff
|
|
|
|
!= hp->cth_funcoff - hp->cth_objtoff))
|
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT,
|
|
|
|
_("Object index section exists is neither empty nor the "
|
|
|
|
"same length as the object section: %u versus %u "
|
|
|
|
"bytes"), hp->cth_funcoff - hp->cth_objtoff,
|
|
|
|
hp->cth_funcidxoff - hp->cth_objtidxoff);
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CORRUPT));
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((hp->cth_varoff - hp->cth_funcidxoff != 0) &&
|
|
|
|
(hp->cth_varoff - hp->cth_funcidxoff
|
|
|
|
!= hp->cth_objtidxoff - hp->cth_funcoff))
|
|
|
|
{
|
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT,
|
|
|
|
_("Function index section exists is neither empty nor the "
|
|
|
|
"same length as the function section: %u versus %u "
|
|
|
|
"bytes"), hp->cth_objtidxoff - hp->cth_funcoff,
|
|
|
|
hp->cth_varoff - hp->cth_funcidxoff);
|
|
|
|
return (ctf_set_open_errno (errp, ECTF_CORRUPT));
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Once everything is determined to be valid, attempt to decompress the CTF
|
|
|
|
data buffer if it is compressed, or copy it into new storage if it is not
|
|
|
|
compressed but needs endian-flipping. Otherwise we just put the data
|
|
|
|
section's buffer pointer into ctf_buf, below. */
|
|
|
|
|
|
|
|
/* Note: if this is a v1 buffer, it will be reallocated and expanded by
|
|
|
|
init_types(). */
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (hp->cth_flags & CTF_F_COMPRESS)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf: fix a number of build problems found on Solaris and NetBSD
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
2019-05-31 17:10:51 +08:00
|
|
|
size_t srclen;
|
|
|
|
uLongf dstlen;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
const void *src;
|
|
|
|
int rc = Z_OK;
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* We are allocating this ourselves, so we can drop the ctf header
|
|
|
|
copy in favour of ctf->ctf_header. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_base = malloc (fp->ctf_size)) == NULL)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
err = ECTF_ZALLOC;
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
fp->ctf_dynbase = fp->ctf_base;
|
|
|
|
hp->cth_flags &= ~CTF_F_COMPRESS;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
src = (unsigned char *) ctfsect->cts_data + hdrsz;
|
|
|
|
srclen = ctfsect->cts_size - hdrsz;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
dstlen = fp->ctf_size;
|
|
|
|
fp->ctf_buf = fp->ctf_base;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if ((rc = uncompress (fp->ctf_base, &dstlen, src, srclen)) != Z_OK)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_err_warn (NULL, 0, ECTF_DECOMPRESS, _("zlib inflate err: %s"),
|
|
|
|
zError (rc));
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
err = ECTF_DECOMPRESS;
|
|
|
|
goto bad;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if ((size_t) dstlen != fp->ctf_size)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_err_warn (NULL, 0, ECTF_CORRUPT,
|
|
|
|
_("zlib inflate short: got %lu of %lu bytes"),
|
|
|
|
(unsigned long) dstlen, (unsigned long) fp->ctf_size);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
err = ECTF_CORRUPT;
|
|
|
|
goto bad;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
else if (foreign_endian)
|
|
|
|
{
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_base = malloc (fp->ctf_size)) == NULL)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
err = ECTF_ZALLOC;
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
fp->ctf_dynbase = fp->ctf_base;
|
|
|
|
memcpy (fp->ctf_base, ((unsigned char *) ctfsect->cts_data) + hdrsz,
|
|
|
|
fp->ctf_size);
|
|
|
|
fp->ctf_buf = fp->ctf_base;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
else
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
/* We are just using the section passed in -- but its header may be an old
|
|
|
|
version. Point ctf_buf past the old header, and never touch it
|
|
|
|
again. */
|
|
|
|
fp->ctf_base = (unsigned char *) ctfsect->cts_data;
|
|
|
|
fp->ctf_dynbase = NULL;
|
|
|
|
fp->ctf_buf = fp->ctf_base + hdrsz;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
/* Once we have uncompressed and validated the CTF data buffer, we can
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
proceed with initializing the ctf_dict_t we allocated above.
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
Nothing that depends on buf or base should be set directly in this function
|
|
|
|
before the init_types() call, because it may be reallocated during
|
|
|
|
transparent upgrade if this recension of libctf is so configured: see
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_base(). */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_version (fp, hp, hp->cth_version);
|
libctf: deduplicate and sort the string table
ctf.h states:
> [...] the CTF string table does not contain any duplicated strings.
Unfortunately this is entirely untrue: libctf has before now made no
attempt whatsoever to deduplicate the string table. It computes the
string table's length on the fly as it adds new strings to the dynamic
CTF file, and ctf_update() just writes each string to the table and
notes the current write position as it traverses the dynamic CTF file's
data structures and builds the final CTF buffer. There is no global
view of the strings and no deduplication.
Fix this by erasing the ctf_dtvstrlen dead-reckoning length, and adding
a new dynhash table ctf_str_atoms that maps unique strings to a list
of references to those strings: a reference is a simple uint32_t * to
some value somewhere in the under-construction CTF buffer that needs
updating to note the string offset when the strtab is laid out.
Adding a string is now a simple matter of calling ctf_str_add_ref(),
which adds a new atom to the atoms table, if one doesn't already exist,
and adding the location of the reference to this atom to the refs list
attached to the atom: this works reliably as long as one takes care to
only call ctf_str_add_ref() once the final location of the offset is
known (so you can't call it on a temporary structure and then memcpy()
that structure into place in the CTF buffer, because the ref will still
point to the old location: ctf_update() changes accordingly).
Generating the CTF string table is a matter of calling
ctf_str_write_strtab(), which counts the length and number of elements
in the atoms table using the ctf_dynhash_iter() function we just added,
populating an array of pointers into the atoms table and sorting it into
order (to help compressors), then traversing this table and emitting it,
updating the refs to each atom as we go. The only complexity here is
arranging to keep the null string at offset zero, since a lot of code in
libctf depends on being able to leave strtab references at 0 to indicate
'no name'. Once the table is constructed and the refs updated, we know
how long it is, so we can realloc() the partial CTF buffer we allocated
earlier and can copy the table on to the end of it (and purge the refs
because they're not needed any more and have been invalidated by the
realloc() call in any case).
The net effect of all this is a reduction in uncompressed strtab sizes
of about 30% (perhaps a quarter to a half of all strings across the
Linux kernel are eliminated as duplicates). Of course, duplicated
strings are highly redundant, so the space saving after compression is
only about 20%: when the other non-strtab sections are factored in, CTF
sizes shrink by about 10%.
No change in externally-visible API or file format (other than the
reduction in pointless redundancy).
libctf/
* ctf-impl.h: (struct ctf_strs_writable): New, non-const version of
struct ctf_strs.
(struct ctf_dtdef): Note that dtd_data.ctt_name is unpopulated.
(struct ctf_str_atom): New, disambiguated single string.
(struct ctf_str_atom_ref): New, points to some other location that
references this string's offset.
(struct ctf_file): New members ctf_str_atoms and ctf_str_num_refs.
Remove member ctf_dtvstrlen: we no longer track the total strlen
as we add strings.
(ctf_str_create_atoms): Declare new function in ctf-string.c.
(ctf_str_free_atoms): Likewise.
(ctf_str_add): Likewise.
(ctf_str_add_ref): Likewise.
(ctf_str_purge_refs): Likewise.
(ctf_str_write_strtab): Likewise.
(ctf_realloc): Declare new function in ctf-util.c.
* ctf-open.c (ctf_bufopen): Create the atoms table.
(ctf_file_close): Destroy it.
* ctf-create.c (ctf_update): Copy-and-free it on update. No longer
special-case the position of the parname string. Construct the
strtab by calling ctf_str_add_ref and ctf_str_write_strtab after the
rest of each buffer element is constructed, not via open-coding:
realloc the CTF buffer and append the strtab to it. No longer
maintain ctf_dtvstrlen. Sort the variable entry table later, after
strtab construction.
(ctf_copy_membnames): Remove: integrated into ctf_copy_{s,l,e}members.
(ctf_copy_smembers): Drop the string offset: call ctf_str_add_ref
after buffer element construction instead.
(ctf_copy_lmembers): Likewise.
(ctf_copy_emembers): Likewise.
(ctf_create): No longer maintain the ctf_dtvstrlen.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
* ctf-util.c (ctf_realloc): New, wrapper around realloc that aborts
if there are active ctf_str_num_refs.
(ctf_strraw): Move to ctf-string.c.
(ctf_strptr): Likewise.
* ctf-string.c: New file, strtab manipulation.
* Makefile.am (libctf_a_SOURCES): Add it.
* Makefile.in: Regenerate.
2019-06-27 20:51:10 +08:00
|
|
|
ctf_str_create_atoms (fp);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
fp->ctf_parmax = CTF_MAX_PTYPE;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
memcpy (&fp->ctf_data, ctfsect, sizeof (ctf_sect_t));
|
|
|
|
|
|
|
|
if (symsect != NULL)
|
|
|
|
{
|
|
|
|
memcpy (&fp->ctf_symtab, symsect, sizeof (ctf_sect_t));
|
|
|
|
memcpy (&fp->ctf_strtab, strsect, sizeof (ctf_sect_t));
|
|
|
|
}
|
|
|
|
|
|
|
|
if (fp->ctf_data.cts_name != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_data.cts_name = strdup (fp->ctf_data.cts_name)) == NULL)
|
|
|
|
{
|
|
|
|
err = ENOMEM;
|
|
|
|
goto bad;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
if (fp->ctf_symtab.cts_name != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_symtab.cts_name = strdup (fp->ctf_symtab.cts_name)) == NULL)
|
|
|
|
{
|
|
|
|
err = ENOMEM;
|
|
|
|
goto bad;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
if (fp->ctf_strtab.cts_name != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_strtab.cts_name = strdup (fp->ctf_strtab.cts_name)) == NULL)
|
|
|
|
{
|
|
|
|
err = ENOMEM;
|
|
|
|
goto bad;
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp->ctf_data.cts_name == NULL)
|
|
|
|
fp->ctf_data.cts_name = _CTF_NULLSTR;
|
|
|
|
if (fp->ctf_symtab.cts_name == NULL)
|
|
|
|
fp->ctf_symtab.cts_name = _CTF_NULLSTR;
|
|
|
|
if (fp->ctf_strtab.cts_name == NULL)
|
|
|
|
fp->ctf_strtab.cts_name = _CTF_NULLSTR;
|
|
|
|
|
|
|
|
if (strsect != NULL)
|
|
|
|
{
|
|
|
|
fp->ctf_str[CTF_STRTAB_1].cts_strs = strsect->cts_data;
|
|
|
|
fp->ctf_str[CTF_STRTAB_1].cts_len = strsect->cts_size;
|
|
|
|
}
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
fp->ctf_syn_ext_strtab = syn_strtab;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (foreign_endian &&
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
(err = flip_ctf (fp, hp, fp->ctf_buf)) != 0)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
/* We can be certain that flip_ctf() will have endian-flipped everything
|
2019-09-26 22:26:48 +08:00
|
|
|
other than the types table when we return. In particular the header
|
|
|
|
is fine, so set it, to allow freeing to use the usual code path. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_base (fp, hp, fp->ctf_base);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_base (fp, hp, fp->ctf_base);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* No need to do anything else for dynamic dicts: they do not support symbol
|
|
|
|
lookups, and the type table is maintained in the dthashes. */
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if (fp->ctf_flags & LCTF_RDWR)
|
|
|
|
{
|
|
|
|
fp->ctf_refcnt = 1;
|
|
|
|
return fp;
|
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if ((err = init_types (fp, hp)) != 0)
|
|
|
|
goto bad;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
/* Allocate and initialize the symtab translation table, pointed to by
|
|
|
|
ctf_sxlate, and the corresponding index sections. This table may be too
|
|
|
|
large for the actual size of the object and function info sections: if so,
|
|
|
|
ctf_nsyms will be adjusted and the excess will never be used. It's
|
|
|
|
possible to do indexed symbol lookups even without a symbol table, so check
|
libctf, include: support foreign-endianness symtabs with CTF
The CTF symbol lookup machinery added recently has one deficit: it
assumes the symtab is in the machine's native endianness. This is
always true when the linker is writing out symtabs (because cross
linkers byteswap symbols only after libctf has been called on them), but
may be untrue in the cross case when the linker or another tool
(objdump, etc) is reading them.
Unfortunately the easy way to model this to the caller, as an endianness
field in the ctf_sect_t, is precluded because doing so would change the
size of the ctf_sect_t, which would be an ABI break. So, instead, allow
the endianness of the symtab to be set after open time, by calling one
of the two new API functions ctf_symsect_endianness (for ctf_dict_t's)
or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf
calls these functions automatically for objects opened via any of the
BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen,
ctf_open, or ctf_arc_open), but the various mechanisms that just take
raw ctf_sect_t's will assume the symtab is in native endianness and need
a later call to ctf_*symsect_endianness to adjust it if needed. (This
call is basically free if the endianness is actually native: it only
costs anything if the symtab endianness was previously guessed wrong,
and there is a symtab, and we are using it directly rather than using
symtab indexing.)
Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the
symtab endianness is correctly set will probably give wrong answers --
but you can set it at any time as long as it is before then.
include/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h: Style nit: remove () on function names in comments.
(ctf_sect_t): Mention endianness concerns.
(ctf_symsect_endianness): New declaration.
(ctf_arc_symsect_endianness): Likewise.
libctf/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New.
(struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise.
* ctf-create.c (ctf_serialize): Adjust for new field.
* ctf-open.c (init_symtab): Note the semantics of repeated calls.
(ctf_symsect_endianness): New.
(ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for
the native endianness.
(_Static_assert): Moved...
(swap_thing): ... with this...
* swap.h: ... to here.
* ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the
Elf32_Sym if the ctf_symtab_little_endian demands it.
(ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed.
* ctf-archive.c (ctf_arc_symsect_endianness): New, set the
endianness of the symtab used by the dicts in an archive.
(ctf_archive_iter_internal): Initialize to unknown (assumed native,
do not call ctf_symsect_endianness).
(ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be.
(ctf_dict_open_internal): Propagate the endianness down.
(ctf_dict_open_sections): Likewise.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the
struct bfd and pass it down to the archive.
* libctf.ver: Add ctf_symsect_endianness and
ctf_arc_symsect_endianness.
2020-11-24 05:17:44 +08:00
|
|
|
even in that case. Initially, we assume the symtab is native-endian: if it
|
|
|
|
isn't, the caller will inform us later by calling ctf_symsect_endianness. */
|
|
|
|
#ifdef WORDS_BIGENDIAN
|
|
|
|
fp->ctf_symsect_little_endian = 0;
|
|
|
|
#else
|
|
|
|
fp->ctf_symsect_little_endian = 1;
|
|
|
|
#endif
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (symsect != NULL)
|
|
|
|
{
|
|
|
|
fp->ctf_nsyms = symsect->cts_size / symsect->cts_entsize;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
fp->ctf_sxlate = malloc (fp->ctf_nsyms * sizeof (uint32_t));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp->ctf_sxlate == NULL)
|
|
|
|
{
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
err = ENOMEM;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
if ((err = init_symtab (fp, hp, symsect)) != 0)
|
|
|
|
goto bad;
|
|
|
|
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_set_ctl_hashes (fp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (symsect != NULL)
|
|
|
|
{
|
|
|
|
if (symsect->cts_entsize == sizeof (Elf64_Sym))
|
|
|
|
(void) ctf_setmodel (fp, CTF_MODEL_LP64);
|
|
|
|
else
|
|
|
|
(void) ctf_setmodel (fp, CTF_MODEL_ILP32);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
(void) ctf_setmodel (fp, CTF_MODEL_NATIVE);
|
|
|
|
|
|
|
|
fp->ctf_refcnt = 1;
|
|
|
|
return fp;
|
|
|
|
|
|
|
|
bad:
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
ctf_set_open_errno (errp, err);
|
libctf, binutils, include, ld: gettextize and improve error handling
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
2020-07-27 23:45:15 +08:00
|
|
|
ctf_err_warn_to_open (fp);
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_close (fp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Bump the refcount on the specified CTF dict, to allow export of ctf_dict_t's
|
|
|
|
from iterators that open and close the ctf_dict_t around the loop. (This
|
|
|
|
does not extend their lifetime beyond that of the ctf_archive_t in which they
|
|
|
|
are contained.) */
|
2020-06-08 16:24:01 +08:00
|
|
|
|
|
|
|
void
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_ref (ctf_dict_t *fp)
|
2020-06-08 16:24:01 +08:00
|
|
|
{
|
|
|
|
fp->ctf_refcnt++;
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Close the specified CTF dict and free associated data structures. Note that
|
|
|
|
ctf_dict_close() is a reference counted operation: if the specified file is
|
|
|
|
the parent of other active dict, its reference count will be greater than one
|
|
|
|
and it will be freed later when no active children exist. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
void
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_close (ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
ctf_dtdef_t *dtd, *ntd;
|
|
|
|
ctf_dvdef_t *dvd, *nvd;
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_in_flight_dynsym_t *did, *nid;
|
libctf, ld, binutils: add textual error/warning reporting for libctf
This commit adds a long-missing piece of infrastructure to libctf: the
ability to report errors and warnings using all the power of printf,
rather than being restricted to one errno value. Internally, libctf
calls ctf_err_warn() to add errors and warnings to a list: a new
iterator ctf_errwarning_next() then consumes this list one by one and
hands it to the caller, which can free it. New errors and warnings are
added until the list is consumed by the caller or the ctf_file_t is
closed, so you can dump them at intervals. The caller can of course
choose to print only those warnings it wants. (I am not sure whether we
want objdump, readelf or ld to print warnings or not: right now I'm
printing them, but maybe we only want to print errors? This entirely
depends on whether warnings are voluminous things describing e.g. the
inability to emit single types because of name clashes or something.
There are no users of this infrastructure yet, so it's hard to say.)
There is no internationalization here yet, but this at least adds a
place where internationalization can be added, to one of
ctf_errwarning_next or ctf_err_warn.
We also provide a new ctf_assert() function which uses this
infrastructure to provide non-fatal assertion failures while emitting an
assert-like string to the caller: to save space and avoid needlessly
duplicating unchanging strings, the assertion test is inlined but the
print-things-out failure case is not. All assertions in libctf will be
converted to use this machinery in future commits and propagate
assertion-failure errors up, so that the linker in particular cannot be
killed by libctf assertion failures when it could perfectly well just
print warnings and drop the CTF section.
include/
* ctf-api.h (ECTF_INTERNAL): Adjust error text.
(ctf_errwarning_next): New.
libctf/
* ctf-impl.h (ctf_assert): New.
(ctf_err_warning_t): Likewise.
(ctf_file_t) <ctf_errs_warnings>: Likewise.
(ctf_err_warn): New prototype.
(ctf_assert_fail_internal): Likewise.
* ctf-inlines.h (ctf_assert_internal): Likewise.
* ctf-open.c (ctf_file_close): Free ctf_errs_warnings.
* ctf-create.c (ctf_serialize): Copy it on serialization.
* ctf-subr.c (ctf_err_warn): New, add an error/warning.
(ctf_errwarning_next): New iterator, free and pass back
errors/warnings in succession.
* libctf.ver (ctf_errwarning_next): Add.
ld/
* ldlang.c (lang_ctf_errs_warnings): New, print CTF errors
and warnings. Assert when libctf asserts.
(lang_merge_ctf): Call it.
(land_write_ctf): Likewise.
binutils/
* objdump.c (ctf_archive_member): Print CTF errors and warnings.
* readelf.c (dump_ctf_archive_member): Likewise.
2020-06-04 22:07:54 +08:00
|
|
|
ctf_err_warning_t *err, *nerr;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp == NULL)
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
return; /* Allow ctf_dict_close(NULL) to simplify caller code. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dprintf ("ctf_dict_close(%p) refcnt=%u\n", (void *) fp, fp->ctf_refcnt);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp->ctf_refcnt > 1)
|
|
|
|
{
|
|
|
|
fp->ctf_refcnt--;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
/* It is possible to recurse back in here, notably if dicts in the
|
|
|
|
ctf_link_inputs or ctf_link_outputs cite this dict as a parent without
|
|
|
|
using ctf_import_unref. Do nothing in that case. */
|
|
|
|
if (fp->ctf_refcnt == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
fp->ctf_refcnt--;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_dyncuname);
|
|
|
|
free (fp->ctf_dynparname);
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
if (fp->ctf_parent && !fp->ctf_parent_unreffed)
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_close (fp->ctf_parent);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
for (dtd = ctf_list_next (&fp->ctf_dtdefs); dtd != NULL; dtd = ntd)
|
|
|
|
{
|
|
|
|
ntd = ctf_list_next (dtd);
|
|
|
|
ctf_dtd_delete (fp, dtd);
|
|
|
|
}
|
|
|
|
ctf_dynhash_destroy (fp->ctf_dthash);
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
if (fp->ctf_flags & LCTF_RDWR)
|
|
|
|
{
|
|
|
|
ctf_dynhash_destroy (fp->ctf_structs.ctn_writable);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_unions.ctn_writable);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_enums.ctn_writable);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_names.ctn_writable);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
ctf_hash_destroy (fp->ctf_structs.ctn_readonly);
|
|
|
|
ctf_hash_destroy (fp->ctf_unions.ctn_readonly);
|
|
|
|
ctf_hash_destroy (fp->ctf_enums.ctn_readonly);
|
|
|
|
ctf_hash_destroy (fp->ctf_names.ctn_readonly);
|
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
for (dvd = ctf_list_next (&fp->ctf_dvdefs); dvd != NULL; dvd = nvd)
|
|
|
|
{
|
|
|
|
nvd = ctf_list_next (dvd);
|
|
|
|
ctf_dvd_delete (fp, dvd);
|
|
|
|
}
|
|
|
|
ctf_dynhash_destroy (fp->ctf_dvhash);
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
|
libctf, include: find types of symbols by name
The existing ctf_lookup_by_symbol and ctf_arc_lookup_symbol functions
suffice to look up the types of symbols if the caller already has a
symbol number. But the caller often doesn't have one of those and only
knows the name of the symbol: also, in object files, the caller might
not have a useful symbol number in any sense (and neither does libctf:
the 'symbol number' we use in that case literally starts at 0 for the
lexicographically first-sorted symbol in the symtypetab and counts those
symbols, so it corresponds to nothing useful).
This means that even though object files have a symtypetab (generated by
the compiler or by ld -r), the only way we can look up anything in it is
to iterate over all symbols in turn with ctf_symbol_next until we find
the one we want.
This is unhelpful and pointlessly inefficient.
So add a pair of functions to look up symbols by name in a dict and in a
whole archive: ctf_lookup_by_symbol_name and ctf_arc_lookup_symbol_name.
These are identical to the existing functions except that they take
symbol names rather than symbol numbers.
To avoid insane repetition, we do some refactoring in the process, so
that both ctf_lookup_by_symbol and ctf_arc_lookup_symbol turn into thin
wrappers around internal functions that do both lookup by symbol index
and lookup by name. This massively reduces code duplication because
even the existing lookup-by-index stuff wants to use a name sometimes
(when looking up in indexed sections), and the new lookup-by-name stuff
has to turn it into an index sometimes (when looking up in non-indexed
sections): doing it this way lets us share most of that.
The actual name->index lookup is done by ctf_lookup_symbol_idx. We do
not anticipate this lookup to be as heavily used as ld.so symbol lookup
by many orders of magnitude, so using the ELF symbol hashes would
probably take more time to read them than is saved by using the hashes,
and it adds a lot of complexity. Instead, do a linear search for the
symbol name, caching all the name -> index mappings as we go, so that
future searches are likely to hit in the cache. To avoid having to
repeat this search over and over in a CTF archive when
ctf_arc_lookup_symbol_name is used, have cached archive lookups (the
sort done by ctf_arc_lookup_symbol* and the ctf_archive_next iterator)
pick out the first dict they cache in a given archive and store it in a
new ctf_archive field, ctfi_crossdict_cache. This can be used to store
cross-dictionary cached state that depends on things like the ELF symbol
table rather than the contents of any one dict. ctf_lookup_symbol_idx
then caches its name->index mappings in the dictionary named in the
crossdict cache, if any, so that ctf_lookup_symbol_idx in other dicts
in the same archive benefit from the previous linear search, and the
symtab only needs to be scanned at most once.
(Note that if you call ctf_lookup_by_symbol_name in one specific dict,
and then follow it with a ctf_arc_lookup_symbol_name, the former will
not use the crossdict cache because it's only populated by the dict
opens in ctf_arc_lookup_symbol_name. This is harmless except for a small
one-off waste of memory and time: it's only a cache, after all. We can
fix this later by using the archive caching machinery more
aggressively.)
In ctf-archive, we do similar things, turning ctf_arc_lookup_symbol into
a wrapper around a new function that does both index -> ID and name ->
ID lookups across all dicts in an archive. We add a new
ctfi_symnamedicts cache that maps symbol names to the ctf_dict_t * that
it was found in (so that linear searches for symbols don't need to be
repeated): but we also *remove* a cache, the ctfi_syms cache that was
memoizing the actual ctf_id_t returned from every call to
ctf_arc_lookup_symbol. This is pointless: all it saves is one call to
ctf_lookup_by_symbol, and that's basically an array lookup and nothing
more so isn't worth caching. (Equally, given that symbol -> index
mappings are cached by ctf_lookup_by_symbol_name, those calls are nearly
free after the first call, so there's no point caching the ctf_id_t in
that case either.)
We fix up one test that was doing manual symbol lookup to use
ctf_arc_lookup_symbol instead, and enhance it to check that the caching
layer is not totally broken: we also add a new test to do lookups in a
.o file, and another to do lookups in an archive with conflicted types
and make sure that sort of multi-dict lookup is actually working.
include/ChangeLog
2021-02-17 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_arc_lookup_symbol_name): New.
(ctf_lookup_by_symbol_name): Likewise.
libctf/ChangeLog
2021-02-17 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symhash>: New.
<ctf_symhash_latest>: Likewise.
(struct ctf_archive_internal) <ctfi_crossdict_cache>: New.
<ctfi_symnamedicts>: New.
<ctfi_syms>: Remove.
(ctf_lookup_symbol_name): Remove.
* ctf-lookup.c (ctf_lookup_symbol_name): Propagate errors from
parent properly. Make static.
(ctf_lookup_symbol_idx): New, linear search for the symbol name,
cached in the crossdict cache's ctf_symhash (if available), or
this dict's (otherwise).
(ctf_try_lookup_indexed): Allow the symname to be passed in.
(ctf_lookup_by_symbol): Turn into a wrapper around...
(ctf_lookup_by_sym_or_name): ... this, supporting name lookup too,
using ctf_lookup_symbol_idx in non-writable dicts. Special-case
name lookup in dynamic dicts without reported symbols, which have
no symtab or dynsymidx but where name lookup should still work.
(ctf_lookup_by_symbol_name): New, another wrapper.
* ctf-archive.c (enosym): Note that this is present in
ctfi_symnamedicts too.
(ctf_arc_close): Adjust for removal of ctfi_syms. Free the
ctfi_symnamedicts.
(ctf_arc_flush_caches): Likewise.
(ctf_dict_open_cached): Memoize the first cached dict in the
crossdict cache.
(ctf_arc_lookup_symbol): Turn into a wrapper around...
(ctf_arc_lookup_sym_or_name): ... this. No longer cache
ctf_id_t lookups: just call ctf_lookup_by_symbol as needed (but
still cache the dicts those lookups succeed in). Add
lookup-by-name support, with dicts of successful lookups cached in
ctfi_symnamedicts. Refactor the caching code a bit.
(ctf_arc_lookup_symbol_name): New, another wrapper.
* ctf-open.c (ctf_dict_close): Free the ctf_symhash.
* libctf.ver (LIBCTF_1.2): New version. Add
ctf_lookup_by_symbol_name, ctf_arc_lookup_symbol_name.
* testsuite/libctf-lookup/enum-symbol.c (main): Use
ctf_arc_lookup_symbol rather than looking up the name ourselves.
Fish it out repeatedly, to make sure that symbol caching isn't
broken.
(symidx_64): Remove.
(symidx_32): Remove.
* testsuite/libctf-lookup/enum-symbol-obj.lk: Test symbol lookup
in an unlinked object file (indexed symtypetab sections only).
* testsuite/libctf-writable/symtypetab-nonlinker-writeout.c
(try_maybe_reporting): Check symbol types via
ctf_lookup_by_symbol_name as well as ctf_symbol_next.
* testsuite/libctf-lookup/conflicting-type-syms.*: New test of
lookups in a multi-dict archive.
2021-02-17 23:21:12 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_symhash);
|
libctf: symbol type linking support
This adds facilities to write out the function info and data object
sections, which efficiently map from entries in the symbol table to
types. The write-side code is entirely new: the read-side code was
merely significantly changed and support for indexed tables added
(pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff
header fields).
With this in place, you can use ctf_lookup_by_symbol to look up the
types of symbols of function and object type (and, as before, you can
use ctf_lookup_variable to look up types of file-scope variables not
present in the symbol table, as long as you know their name: but
variables that are also data objects are now found in the data object
section instead.)
(Compatible) file format change:
The CTF spec has always said that the function info section looks much
like the CTF_K_FUNCTIONs in the type section: an info word (including an
argument count) followed by a return type and N argument types. This
format is suboptimal: it means function symbols cannot be deduplicated
and it causes a lot of ugly code duplication in libctf. But
conveniently the compiler has never emitted this! Because it has always
emitted a rather different format that libctf has never accepted, we can
be sure that there are no instances of this function info section in the
wild, and can freely change its format without compatibility concerns or
a file format version bump. (And since it has never been emitted in any
code that generated any older file format version, either, we need keep
no code to read the format as specified at all!)
So the function info section is now specified as an array of uint32_t,
exactly like the object data section: each entry is a type ID in the
type section which must be of kind CTF_K_FUNCTION, the prototype of
this function.
This allows function types to be deduplicated and also correctly encodes
the fact that all functions declared in C really are types available to
the program: so they should be stored in the type section like all other
types. (In format v4, we will be able to represent the types of static
functions as well, but that really does require a file format change.)
We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the
new function info format is in use. A sufficiently new compiler will
always set this flag. New libctf will always set this flag: old libctf
will refuse to open any CTF dicts that have this flag set. If the flag
is not set on a dict being read in, new libctf will disregard the
function info section. Format v4 will remove this flag (or, rather, the
flag has no meaning there and the bit position may be recycled for some
other purpose).
New API:
Symbol addition:
ctf_add_func_sym: Add a symbol with a given name and type. The
type must be of kind CTF_K_FUNCTION (a function
pointer). Internally this adds a name -> type
mapping to the ctf_funchash in the ctf_dict.
ctf_add_objt_sym: Add a symbol with a given name and type. The type
kind can be anything, including function pointers.
This adds to ctf_objthash.
These both treat symbols as name -> type mappings: the linker associates
symbol names with symbol indexes via the ctf_link_shuffle_syms callback,
which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the
ctf_dict. Repeated relinks can add more symbols.
Variables that are also exposed as symbols are removed from the variable
section at serialization time.
CTF symbol type sections which have enough pads, defined by
CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols
where most types are unknown, or in archive where most types are defined
in some child or parent dict, not in this specific dict) are sorted by
name rather than symidx and accompanied by an index which associates
each symbol type entry with a name: the existing ctf_lookup_by_symbol
will map symbol indexes to symbol names and look the names up in the
index automatically. (This is currently ELF-symbol-table-dependent, but
there is almost nothing specific to ELF in here and we can add support
for other symbol table formats easily).
The compiler also uses index sections to communicate the contents of
object file symbol tables without relying on any specific ordering of
symbols: it doesn't need to sort them, and libctf will detect an
unsorted index section via the absence of the new CTF_F_IDXSORTED header
flag, and sort it if needed.
Iteration:
ctf_symbol_next: Iterator which returns the types and names of symbols
one by one, either for function or data symbols.
This does not require any sorting: the ctf_link machinery uses it to
pull in all the compiler-provided symbols cheaply, but it is not
restricted to that use.
(Compatible) changes in API:
ctf_lookup_by_symbol: can now be called for object and function
symbols: never returns ECTF_NOTDATA (which is
now not thrown by anything, but is kept for
compatibility and because it is a plausible
error that we might start throwing again at some
later date).
Internally we also have changes to the ctf-string functionality so that
"external" strings (those where we track a string -> offset mapping, but
only write out an offset) can be consulted via the usual means
(ctf_strptr) before the strtab is written out. This is important
because ctf_link_add_linker_symbol can now be handed symbols named via
strtab offsets, and ctf_link_shuffle_syms must figure out their actual
names by looking in the external symtab we have just been fed by the
ctf_link_add_strtab callback, long before that strtab is written out.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_symbol_next): New.
(ctf_add_objt_sym): Likewise.
(ctf_add_func_sym): Likewise.
* ctf.h: Document new function info section format.
(CTF_F_NEWFUNCINFO): New.
(CTF_F_IDXSORTED): New.
(CTF_F_MAX): Adjust accordingly.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New.
(_libctf_nonnull_): Likewise.
(ctf_in_flight_dynsym_t): New.
(ctf_dict_t) <ctf_funcidx_names>: Likewise.
<ctf_objtidx_names>: Likewise.
<ctf_nfuncidx>: Likewise.
<ctf_nobjtidx>: Likewise.
<ctf_funcidx_sxlate>: Likewise.
<ctf_objtidx_sxlate>: Likewise.
<ctf_objthash>: Likewise.
<ctf_funchash>: Likewise.
<ctf_dynsyms>: Likewise.
<ctf_dynsymidx>: Likewise.
<ctf_dynsymmax>: Likewise.
<ctf_in_flight_dynsym>: Likewise.
(struct ctf_next) <u.ctn_next>: Likewise.
(ctf_symtab_skippable): New prototype.
(ctf_add_funcobjt_sym): Likewise.
(ctf_dynhash_sort_by_name): Likewise.
(ctf_sym_to_elf64): Rename to...
(ctf_elf32_to_link_sym): ... this, and...
(ctf_elf64_to_link_sym): ... this.
* ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO
flag, and presence of index sections. Refactor out
ctf_symtab_skippable and ctf_elf*_to_link_sym, and use them. Use
ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func
sxlate sections if corresponding index section is present. Adjust
for new func info section format.
(ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error
handling. Report incorrect-length index sections. Always do an
init_symtab, even if there is no symtab section (there may be index
sections still).
(flip_objts): Adjust comment: func and objt sections are actually
identical in structure now, no need to caveat.
(ctf_dict_close): Free newly-added data structures.
* ctf-create.c (ctf_create): Initialize them.
(ctf_symtab_skippable): New, refactored out of
init_symtab, with st_nameidx_set check added.
(ctf_add_funcobjt_sym): New, add a function or object symbol to the
ctf_objthash or ctf_funchash, by name.
(ctf_add_objt_sym): Call it.
(ctf_add_func_sym): Likewise.
(symtypetab_delete_nonstatic_vars): New, delete vars also present as
data objects.
(CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters:
this is a function emission, not a data object emission.
(CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit
pads for symbols with no type (only set for unindexed sections).
(CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters:
always emit indexed.
(symtypetab_density): New, figure out section sizes.
(emit_symtypetab): New, emit a symtypetab.
(emit_symtypetab_index): New, emit a symtypetab index.
(ctf_serialize): Call them, emitting suitably sorted symtypetab
sections and indexes. Set suitable header flags. Copy over new
fields.
* ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an
order on symtypetab index sections.
* ctf-link.c (ctf_add_type_mapping): Delete erroneous comment
relating to code that was never committed.
(ctf_link_one_variable): Improve variable name.
(check_sym): New, symtypetab analogue of check_variable.
(ctf_link_deduplicating_one_symtypetab): New.
(ctf_link_deduplicating_syms): Likewise.
(ctf_link_deduplicating): Call them.
(ctf_link_deduplicating_per_cu): Note that we don't call them in
this case (yet).
(ctf_link_add_strtab): Set the error on the fp correctly.
(ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add
a linker symbol to the in-flight list.
(ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the
in-flight list into a mapping we can use, now its names are
resolvable in the external strtab.
* ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with
external strtab offsets.
(ctf_str_rollback): Adjust comment.
(ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from
writeout time...
(ctf_str_add_external): ... to string addition time.
* ctf-lookup.c (ctf_lookup_var_key_t): Rename to...
(ctf_lookup_idx_key_t): ... this, now we use it for syms too.
<clik_names>: New member, a name table.
(ctf_lookup_var): Adjust accordingly.
(ctf_lookup_variable): Likewise.
(ctf_lookup_by_id): Shuffle further up in the file.
(ctf_symidx_sort_arg_cb): New, callback for...
(sort_symidx_by_name): ... this new function to sort a symidx
found to be unsorted (likely originating from the compiler).
(ctf_symidx_sort): New, sort a symidx.
(ctf_lookup_symbol_name): Support dynamic symbols with indexes
provided by the linker. Use ctf_link_sym_t, not Elf64_Sym.
Check the parent if a child lookup fails.
(ctf_lookup_by_symbol): Likewise. Work for function symbols too.
(ctf_symbol_next): New, iterate over symbols with types (without
sorting).
(ctf_lookup_idx_name): New, bsearch for symbol names in indexes.
(ctf_try_lookup_indexed): New, attempt an indexed lookup.
(ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol.
(ctf_func_args): Likewise.
(ctf_get_dict): Move...
* ctf-types.c (ctf_get_dict): ... here.
* ctf-util.c (ctf_sym_to_elf64): Re-express as...
(ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and
st_nameidx_set (always 0, so st_nameidx can be ignored). Look in
the ELF strtab for names.
(ctf_elf32_to_link_sym): Likewise, for Elf32_Sym.
(ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be.
* libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and
ctf_add_func_sym.
2020-11-20 21:34:04 +08:00
|
|
|
free (fp->ctf_funcidx_sxlate);
|
|
|
|
free (fp->ctf_objtidx_sxlate);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_objthash);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_funchash);
|
|
|
|
free (fp->ctf_dynsymidx);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_dynsyms);
|
|
|
|
for (did = ctf_list_next (&fp->ctf_in_flight_dynsyms); did != NULL; did = nid)
|
|
|
|
{
|
|
|
|
nid = ctf_list_next (did);
|
|
|
|
ctf_list_delete (&fp->ctf_in_flight_dynsyms, did);
|
|
|
|
free (did);
|
|
|
|
}
|
|
|
|
|
libctf: deduplicate and sort the string table
ctf.h states:
> [...] the CTF string table does not contain any duplicated strings.
Unfortunately this is entirely untrue: libctf has before now made no
attempt whatsoever to deduplicate the string table. It computes the
string table's length on the fly as it adds new strings to the dynamic
CTF file, and ctf_update() just writes each string to the table and
notes the current write position as it traverses the dynamic CTF file's
data structures and builds the final CTF buffer. There is no global
view of the strings and no deduplication.
Fix this by erasing the ctf_dtvstrlen dead-reckoning length, and adding
a new dynhash table ctf_str_atoms that maps unique strings to a list
of references to those strings: a reference is a simple uint32_t * to
some value somewhere in the under-construction CTF buffer that needs
updating to note the string offset when the strtab is laid out.
Adding a string is now a simple matter of calling ctf_str_add_ref(),
which adds a new atom to the atoms table, if one doesn't already exist,
and adding the location of the reference to this atom to the refs list
attached to the atom: this works reliably as long as one takes care to
only call ctf_str_add_ref() once the final location of the offset is
known (so you can't call it on a temporary structure and then memcpy()
that structure into place in the CTF buffer, because the ref will still
point to the old location: ctf_update() changes accordingly).
Generating the CTF string table is a matter of calling
ctf_str_write_strtab(), which counts the length and number of elements
in the atoms table using the ctf_dynhash_iter() function we just added,
populating an array of pointers into the atoms table and sorting it into
order (to help compressors), then traversing this table and emitting it,
updating the refs to each atom as we go. The only complexity here is
arranging to keep the null string at offset zero, since a lot of code in
libctf depends on being able to leave strtab references at 0 to indicate
'no name'. Once the table is constructed and the refs updated, we know
how long it is, so we can realloc() the partial CTF buffer we allocated
earlier and can copy the table on to the end of it (and purge the refs
because they're not needed any more and have been invalidated by the
realloc() call in any case).
The net effect of all this is a reduction in uncompressed strtab sizes
of about 30% (perhaps a quarter to a half of all strings across the
Linux kernel are eliminated as duplicates). Of course, duplicated
strings are highly redundant, so the space saving after compression is
only about 20%: when the other non-strtab sections are factored in, CTF
sizes shrink by about 10%.
No change in externally-visible API or file format (other than the
reduction in pointless redundancy).
libctf/
* ctf-impl.h: (struct ctf_strs_writable): New, non-const version of
struct ctf_strs.
(struct ctf_dtdef): Note that dtd_data.ctt_name is unpopulated.
(struct ctf_str_atom): New, disambiguated single string.
(struct ctf_str_atom_ref): New, points to some other location that
references this string's offset.
(struct ctf_file): New members ctf_str_atoms and ctf_str_num_refs.
Remove member ctf_dtvstrlen: we no longer track the total strlen
as we add strings.
(ctf_str_create_atoms): Declare new function in ctf-string.c.
(ctf_str_free_atoms): Likewise.
(ctf_str_add): Likewise.
(ctf_str_add_ref): Likewise.
(ctf_str_purge_refs): Likewise.
(ctf_str_write_strtab): Likewise.
(ctf_realloc): Declare new function in ctf-util.c.
* ctf-open.c (ctf_bufopen): Create the atoms table.
(ctf_file_close): Destroy it.
* ctf-create.c (ctf_update): Copy-and-free it on update. No longer
special-case the position of the parname string. Construct the
strtab by calling ctf_str_add_ref and ctf_str_write_strtab after the
rest of each buffer element is constructed, not via open-coding:
realloc the CTF buffer and append the strtab to it. No longer
maintain ctf_dtvstrlen. Sort the variable entry table later, after
strtab construction.
(ctf_copy_membnames): Remove: integrated into ctf_copy_{s,l,e}members.
(ctf_copy_smembers): Drop the string offset: call ctf_str_add_ref
after buffer element construction instead.
(ctf_copy_lmembers): Likewise.
(ctf_copy_emembers): Likewise.
(ctf_create): No longer maintain the ctf_dtvstrlen.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
* ctf-util.c (ctf_realloc): New, wrapper around realloc that aborts
if there are active ctf_str_num_refs.
(ctf_strraw): Move to ctf-string.c.
(ctf_strptr): Likewise.
* ctf-string.c: New file, strtab manipulation.
* Makefile.am (libctf_a_SOURCES): Add it.
* Makefile.in: Regenerate.
2019-06-27 20:51:10 +08:00
|
|
|
ctf_str_free_atoms (fp);
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_tmp_typeslice);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (fp->ctf_data.cts_name != _CTF_NULLSTR)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free ((char *) fp->ctf_data.cts_name);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (fp->ctf_symtab.cts_name != _CTF_NULLSTR)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free ((char *) fp->ctf_symtab.cts_name);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
if (fp->ctf_strtab.cts_name != _CTF_NULLSTR)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free ((char *) fp->ctf_strtab.cts_name);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
else if (fp->ctf_data_mmapped)
|
|
|
|
ctf_munmap (fp->ctf_data_mmapped, fp->ctf_data_mmapped_len);
|
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_dynbase);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_syn_ext_strtab);
|
libctf: add the ctf_link machinery
This is the start of work on the core of the linking mechanism for CTF
sections. This commit handles the type and string sections.
The linker calls these functions in sequence:
ctf_link_add_ctf: to add each CTF section in the input in turn to a
newly-created ctf_file_t (which will appear in the output, and which
itself will become the shared parent that contains types that all
TUs have in common (in all link modes) and all types that do not
have conflicting definitions between types (by default). Input files
that are themselves products of ld -r are supported, though this is
not heavily tested yet.
ctf_link: called once all input files are added to merge the types in
all the input containers into the output container, eliminating
duplicates.
ctf_link_add_strtab: called once the ELF string table is finalized and
all its offsets are known, this calls a callback provided by the
linker which returns the string content and offset of every string in
the ELF strtab in turn: all these strings which appear in the input
CTF strtab are eliminated from it in favour of the ELF strtab:
equally, any strings that only appear in the input strtab will
reappear in the internal CTF strtab of the output.
ctf_link_shuffle_syms (not yet implemented): called once the ELF symtab
is finalized, this calls a callback provided by the linker which
returns information on every symbol in turn as a ctf_link_sym_t. This
is then used to shuffle the function info and data object sections in
the CTF section into symbol table order, eliminating the index
sections which map those sections to symbol names before that point.
Currently just returns ECTF_NOTYET.
ctf_link_write: Returns a buffer containing either a serialized
ctf_file_t (if there are no types with conflicting definitions in the
object files in the link) or a ctf_archive_t containing a large
ctf_file_t (the common types) and a bunch of small ones named after
individual CUs in which conflicting types are found (containing the
conflicting types, and all types that reference them). A threshold
size above which compression takes place is passed as one parameter.
(Currently, only gzip compression is supported, but I hope to add lzma
as well.)
Lifetime rules for this are simple: don't close the input CTF files
until you've called ctf_link for the last time. We do not assume
that symbols or strings passed in by the callback outlast the
call to ctf_link_add_strtab or ctf_link_shuffle_syms.
Right now, the duplicate elimination mechanism is the one already
present as part of the ctf_add_type function, and is not particularly
good: it misses numerous actual duplicates, and the conflicting-types
detection hardly ever reports that types conflict, even when they do
(one of them just tends to get silently dropped): it is also very slow.
This will all be fixed in the next few weeks, but the fix hardly touches
any of this code, and the linker does work without it, just not as
well as it otherwise might. (And when no CTF section is present,
there is no effect on performance, of course. So only people using
a trunk GCC with not-yet-committed patches will even notice. By the
time it gets upstream, things should be better.)
v3: Fix error handling.
v4: check for strdup failure.
v5: fix tabdamage.
include/
* ctf-api.h (struct ctf_link_sym): New, a symbol in flight to the
libctf linking machinery.
(CTF_LINK_SHARE_UNCONFLICTED): New.
(CTF_LINK_SHARE_DUPLICATED): New.
(ECTF_LINKADDEDLATE): New, replacing ECTF_UNUSED.
(ECTF_NOTYET): New, a 'not yet implemented' message.
(ctf_link_add_ctf): New, add an input file's CTF to the link.
(ctf_link): New, merge the type and string sections.
(ctf_link_strtab_string_f): New, callback for feeding strtab info.
(ctf_link_iter_symbol_f): New, callback for feeding symtab info.
(ctf_link_add_strtab): New, tell the CTF linker about the ELF
strtab's strings.
(ctf_link_shuffle_syms): New, ask the CTF linker to shuffle its
symbols into symtab order.
(ctf_link_write): New, ask the CTF linker to write the CTF out.
libctf/
* ctf-link.c: New file, linking of the string and type sections.
* Makefile.am (libctf_a_SOURCES): Add it.
* Makefile.in: Regenerate.
* ctf-impl.h (ctf_file_t): New fields ctf_link_inputs,
ctf_link_outputs.
* ctf-create.c (ctf_update): Update accordingly.
* ctf-open.c (ctf_file_close): Likewise.
* ctf-error.c (_ctf_errlist): Updated with new errors.
2019-07-14 04:06:55 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_link_inputs);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_link_outputs);
|
2019-07-14 04:31:26 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_link_type_mapping);
|
libctf, link: redo cu-mapping handling
Now a bunch of stuff that doesn't apply to ld or any normal use of
libctf, piled into one commit so that it's easier to ignore.
The cu-mapping machinery associates incoming compilation unit names with
outgoing names of CTF dictionaries that should correspond to them, for
non-gdb CTF consumers that would like to group multiple TUs into a
single child dict if conflicting types are found in it (the existing use
case is one kernel module, one child CTF dict, even if the kernel module
is composed of multiple CUs).
The upcoming deduplicator needs to track not only the mapping from
incoming CU name to outgoing dict name, but the inverse mapping from
outgoing dict name to incoming CU name, so it can work over every CTF
dict we might see in the output and link into it.
So rejig the ctf-link machinery to do that. Simultaneously (because
they are closely associated and were written at the same time), we add a
new CTF_LINK_EMPTY_CU_MAPPINGS flag to ctf_link, which tells the
ctf_link machinery to create empty child dicts for each outgoing CU
mapping even if no CUs that correspond to it exist in the link. This is
a bit (OK, quite a lot) of a waste of space, but some existing consumers
require it. (Nobody else should use it.)
Its value is not consecutive with existing CTF_LINK flag values because
we're about to add more flags that are conceptually closer to the
existing ones than this one is.
include/
* ctf-api.h (CTF_LINK_EMPTY_CU_MAPPINGS): New.
libctf/
* ctf-impl.h (ctf_file_t): Improve comments.
<ctf_link_cu_mapping>: Split into...
<ctf_link_in_cu_mapping>: ... this...
<ctf_link_out_cu_mapping>: ... and this.
* ctf-create.c (ctf_serialize): Adjust.
* ctf-open.c (ctf_file_close): Likewise.
* ctf-link.c (ctf_create_per_cu): Look things up in the
in_cu_mapping instead of the cu_mapping.
(ctf_link_add_cu_mapping): The deduplicating link will define
what happens if many FROMs share a TO.
(ctf_link_add_cu_mapping): Create in_cu_mapping and
out_cu_mapping. Do not create ctf_link_outputs here any more, or
create per-CU dicts here: they are already created when needed.
(ctf_link_one_variable): Log a debug message if we skip a
variable due to its type being concealed in a CU-mapped link.
(This is probably too common a case to make into a warning.)
(ctf_link): Create empty per-CU dicts if requested.
2020-06-06 00:36:16 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_link_in_cu_mapping);
|
|
|
|
ctf_dynhash_destroy (fp->ctf_link_out_cu_mapping);
|
libctf: properly handle ctf_add_type of forwards and self-reffing structs
The code to handle structures (and unions) that refer to themselves in
ctf_add_type is extremely dodgy. It works by looking through the list
of not-yet-committed types for a structure with the same name as the
structure in question and assuming, if it finds it, that this must be a
reference to the same type. This is a linear search that gets ever
slower as the dictionary grows, requiring you to call ctf_update at
intervals to keep performance tolerable: but if you do that, you run
into the problem that if a forward declared before the ctf_update is
changed to a structure afterwards, ctf_update explodes.
The last commit fixed most of this: this commit can use it, adding a new
ctf_add_processing hash that tracks source type IDs that are currently
being processed and uses it to avoid infinite recursion rather than the
dynamic type list: we split ctf_add_type into a ctf_add_type_internal,
so that ctf_add_type itself can become a wrapper that empties out this
being-processed hash once the entire recursive type addition is over.
Structure additions themselves avoid adding their dependent types
quite so much by checking the type mapping and avoiding re-adding types
we already know we have added.
We also add support for adding forwards to dictionaries that already
contain the thing they are a forward to: we just silently return the
original type.
v4: return existing struct/union/enum types properly, rather than using
an uninitialized variable: shrinks sizes of CTF sections back down
to roughly where they were in v1/v2 of this patch series.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_file_t) <ctf_add_processing>: New.
* ctf-open.c (ctf_file_close): Free it.
* ctf-create.c (ctf_serialize): Adjust.
(membcmp): When reporting a conflict due to an error, report the
error.
(ctf_add_type): Turn into a ctf_add_processing wrapper. Rename to...
(ctf_add_type_internal): ... this. Hand back types we are already
in the middle of adding immediately. Hand back structs/unions with
the same number of members immediately. Do not walk the dynamic
list. Call ctf_add_type_internal, not ctf_add_type. Handle
forwards promoted to other types and the inverse case identically.
Add structs to the mapping as soon as we intern them, before they
gain any members.
2019-08-08 01:01:08 +08:00
|
|
|
ctf_dynhash_destroy (fp->ctf_add_processing);
|
2020-06-06 01:35:46 +08:00
|
|
|
ctf_dedup_fini (fp, NULL, 0);
|
|
|
|
ctf_dynset_destroy (fp->ctf_dedup_atoms_alloc);
|
libctf: support getting strings from the ELF strtab
The CTF file format has always supported "external strtabs", which
internally are strtab offsets with their MSB on: such refs
get their strings from the strtab passed in at CTF file open time:
this is usually intended to be the ELF strtab, and that's what this
implementation is meant to support, though in theory the external
strtab could come from anywhere.
This commit adds support for these external strings in the ctf-string.c
strtab tracking layer. It's quite easy: we just add a field csa_offset
to the atoms table that tracks all strings: this field tracks the offset
of the string in the ELF strtab (with its MSB already on, courtesy of a
new macro CTF_SET_STID), and adds a new function that sets the
csa_offset to the specified offset (plus MSB). Then we just need to
avoid writing out strings to the internal strtab if they have csa_offset
set, and note that the internal strtab is shorter than it might
otherwise be.
(We could in theory save a little more time here by eschewing sorting
such strings, since we never actually write the strings out anywhere,
but that would mean storing them separately and it's just not worth the
complexity cost until profiling shows it's worth doing.)
We also have to go through a bit of extra effort at variable-sorting
time. This was previously using direct references to the internal
strtab: it couldn't use ctf_strptr or ctf_strraw because the new strtab
is not yet ready to put in its usual field (in a ctf_file_t that hasn't
even been allocated yet at this stage): but now we're using the external
strtab, this will no longer do because it'll be looking things up in the
wrong strtab, with disastrous results. Instead, pass the new internal
strtab in to a new ctf_strraw_explicit function which is just like
ctf_strraw except you can specify a ne winternal strtab to use.
But even now that it is using a new internal strtab, this is not quite
enough: it can't look up strings in the external strtab because ld
hasn't written it out yet, and when it does will write it straight to
disk. Instead, when we write the internal strtab, note all the offset
-> string mappings that we have noted belong in the *external* strtab to
a new "synthetic external strtab" dynhash, ctf_syn_ext_strtab, and look
in there at ctf_strraw time if it is set. This uses minimal extra
memory (because only strings in the external strtab that we actually use
are stored, and even those come straight out of the atoms table), but
let both variable sorting and name interning when ctf_bufopen is next
called work fine. (This also means that we don't need to filter out
spurious ECTF_STRTAB warnings from ctf_bufopen but can pass them back to
the caller, once we wrap ctf_bufopen so that we have a new internal
variant of ctf_bufopen etc that we can pass the synthetic external
strtab to. That error has been filtered out since the days of Solaris
libctf, which didn't try to handle the problem of getting external
strtabs right at construction time at all.)
v3: add the synthetic strtab and all associated machinery.
v5: fix tabdamage.
include/
* ctf.h (CTF_SET_STID): New.
libctf/
* ctf-impl.h (ctf_str_atom_t) <csa_offset>: New field.
(ctf_file_t) <ctf_syn_ext_strtab>: Likewise.
(ctf_str_add_ref): Name the last arg.
(ctf_str_add_external) New.
(ctf_str_add_strraw_explicit): Likewise.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
* ctf-string.c (ctf_strraw_explicit): Split from...
(ctf_strraw): ... here, with new support for ctf_syn_ext_strtab.
(ctf_str_add_ref_internal): Return the atom, not the
string.
(ctf_str_add): Adjust accordingly.
(ctf_str_add_ref): Likewise. Move up in the file.
(ctf_str_add_external): New: update the csa_offset.
(ctf_str_count_strtab): Only account for strings with no csa_offset
in the internal strtab length.
(ctf_str_write_strtab): If the csa_offset is set, update the
string's refs without writing the string out, and update the
ctf_syn_ext_strtab. Make OOM handling less ugly.
* ctf-create.c (struct ctf_sort_var_arg_cb): New.
(ctf_update): Handle failure to populate the strtab. Pass in the
new ctf_sort_var arg. Adjust for ctf_syn_ext_strtab addition.
Call ctf_simple_open_internal, not ctf_simple_open.
(ctf_sort_var): Call ctf_strraw_explicit rather than looking up
strings by hand.
* ctf-hash.c (ctf_hash_insert_type): Likewise (but using
ctf_strraw). Adjust to diagnose ECTF_STRTAB nonetheless.
* ctf-open.c (init_types): No longer filter out ECTF_STRTAB.
(ctf_file_close): Destroy the ctf_syn_ext_strtab.
(ctf_simple_open): Rename to, and reimplement as a wrapper around...
(ctf_simple_open_internal): ... this new function, which calls
ctf_bufopen_internal.
(ctf_bufopen): Rename to, and reimplement as a wrapper around...
(ctf_bufopen_internal): ... this new function, which sets
ctf_syn_ext_strtab.
2019-07-14 03:33:01 +08:00
|
|
|
|
libctf, ld, binutils: add textual error/warning reporting for libctf
This commit adds a long-missing piece of infrastructure to libctf: the
ability to report errors and warnings using all the power of printf,
rather than being restricted to one errno value. Internally, libctf
calls ctf_err_warn() to add errors and warnings to a list: a new
iterator ctf_errwarning_next() then consumes this list one by one and
hands it to the caller, which can free it. New errors and warnings are
added until the list is consumed by the caller or the ctf_file_t is
closed, so you can dump them at intervals. The caller can of course
choose to print only those warnings it wants. (I am not sure whether we
want objdump, readelf or ld to print warnings or not: right now I'm
printing them, but maybe we only want to print errors? This entirely
depends on whether warnings are voluminous things describing e.g. the
inability to emit single types because of name clashes or something.
There are no users of this infrastructure yet, so it's hard to say.)
There is no internationalization here yet, but this at least adds a
place where internationalization can be added, to one of
ctf_errwarning_next or ctf_err_warn.
We also provide a new ctf_assert() function which uses this
infrastructure to provide non-fatal assertion failures while emitting an
assert-like string to the caller: to save space and avoid needlessly
duplicating unchanging strings, the assertion test is inlined but the
print-things-out failure case is not. All assertions in libctf will be
converted to use this machinery in future commits and propagate
assertion-failure errors up, so that the linker in particular cannot be
killed by libctf assertion failures when it could perfectly well just
print warnings and drop the CTF section.
include/
* ctf-api.h (ECTF_INTERNAL): Adjust error text.
(ctf_errwarning_next): New.
libctf/
* ctf-impl.h (ctf_assert): New.
(ctf_err_warning_t): Likewise.
(ctf_file_t) <ctf_errs_warnings>: Likewise.
(ctf_err_warn): New prototype.
(ctf_assert_fail_internal): Likewise.
* ctf-inlines.h (ctf_assert_internal): Likewise.
* ctf-open.c (ctf_file_close): Free ctf_errs_warnings.
* ctf-create.c (ctf_serialize): Copy it on serialization.
* ctf-subr.c (ctf_err_warn): New, add an error/warning.
(ctf_errwarning_next): New iterator, free and pass back
errors/warnings in succession.
* libctf.ver (ctf_errwarning_next): Add.
ld/
* ldlang.c (lang_ctf_errs_warnings): New, print CTF errors
and warnings. Assert when libctf asserts.
(lang_merge_ctf): Call it.
(land_write_ctf): Likewise.
binutils/
* objdump.c (ctf_archive_member): Print CTF errors and warnings.
* readelf.c (dump_ctf_archive_member): Likewise.
2020-06-04 22:07:54 +08:00
|
|
|
for (err = ctf_list_next (&fp->ctf_errs_warnings); err != NULL; err = nerr)
|
|
|
|
{
|
|
|
|
nerr = ctf_list_next (err);
|
|
|
|
ctf_list_delete (&fp->ctf_errs_warnings, err);
|
|
|
|
free (err->cew_text);
|
|
|
|
free (err);
|
|
|
|
}
|
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_sxlate);
|
|
|
|
free (fp->ctf_txlate);
|
|
|
|
free (fp->ctf_ptrtab);
|
libctf: fix lookups of pointers by name in parent dicts
When you look up a type by name using ctf_lookup_by_name, in most cases
libctf can just strip off any qualifiers and look for the name, but for
pointer types this doesn't work, since the caller will want the pointer
type itself. But pointer types are nameless, and while they cite the
types they point to, looking up a type by name requires a link going the
*other way*, from the type pointed to to the pointer type that points to
it.
libctf has always built this up at open time: ctf_ptrtab is an array of
type indexes pointing from the index of every type to the index of the
type that points to it. But because it is built up at open time (and
because it uses type indexes and not type IDs) it is restricted to
working within a single dict and ignoring parent/child
relationships. This is normally invisible, unless you manage to get a
dict with a type in the parent but the only pointer to it in a child.
The ctf_ptrtab will not track this relationship, so lookups of this
pointer type by name will fail. Since which type is in the parent and
which in the child is largely opaque to the user (which goes where is up
to the deduplicator, and it can and does reshuffle things to save
space), this leads to a very bad user experience, with an
obviously-visible pointer type which ctf_lookup_by_name claims doesn't
exist.
The fix is to have another array, ctf_pptrtab, which is populated in
child dicts: like the parent's ctf_ptrtab, it has one element per type
in the parent, but is all zeroes except for those types which are
pointed to by types in the child: so it maps parent dict indices to
child dict indices. The array is grown, and new child types scanned,
whenever a lookup happens and new types have been added to the child
since the last time a lookup happened that might need the pptrtab.
(So for non-writable dicts, this only happens once, since new types
cannot be added to non-writable dicts at all.)
Since this introduces new complexity (involving updating only part of
the ctf_pptrtab) which is only seen when a writable dict is in use, we
introduce a new libctf-writable testsuite that contains lookup tests
with no corresponding CTF-containing .c files (which can thus be run
even on platforms with no .ctf-section support in the linker yet), and
add a test to check that creation of pointers in children to types in
parents and a following lookup by name works as expected. The non-
writable case is tested in a new libctf-regression testsuite which is
used to track now-fixed outright bugs in libctf.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_pptrtab>: New.
<ctf_pptrtab_len>: New.
<ctf_pptrtab_typemax>: New.
* ctf-create.c (ctf_serialize): Update accordingly.
(ctf_add_reftype): Note that we don't need to update pptrtab here,
despite updating ptrtab.
* ctf-open.c (ctf_dict_close): Destroy the pptrtab.
(ctf_import): Likewise.
(ctf_import_unref): Likewise.
* ctf-lookup.c (grow_pptrtab): New.
(refresh_pptrtab): New, update a pptrtab.
(ctf_lookup_by_name): Turn into a wrapper around (and rename to)...
(ctf_lookup_by_name_internal): ... this: construct the pptrtab, and
use it in addition to the parent's ptrtab when parent dicts are
searched.
* testsuite/libctf-regression/regression.exp: New testsuite for
regression tests.
* testsuite/libctf-regression/pptrtab*: New test.
* testsuite/libctf-writable/writable.exp: New testsuite for tests of
writable CTF dicts.
* testsuite/libctf-writable/pptrtab*: New test.
2021-01-05 21:25:56 +08:00
|
|
|
free (fp->ctf_pptrtab);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_header);
|
|
|
|
free (fp);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Backward compatibility. */
|
|
|
|
void
|
|
|
|
ctf_file_close (ctf_file_t *fp)
|
|
|
|
{
|
|
|
|
ctf_dict_close (fp);
|
|
|
|
}
|
|
|
|
|
libctf: ELF file opening via BFD
These functions let you open an ELF file with a customarily-named CTF
section in it, automatically opening the CTF file or archive and
associating the symbol and string tables in the ELF file with the CTF
container, so that you can look up the types of symbols in the ELF file
via ctf_lookup_by_symbol(), and so that strings can be shared between
the ELF file and CTF container, to save space.
It uses BFD machinery to do so. This has now been lightly tested and
seems to work. In particular, if you already have a bfd you can pass
it in to ctf_bfdopen(), and if you want a bfd made for you you can
call ctf_open() or ctf_fdopen(), optionally specifying a target (or
try once without a target and then again with one if you get
ECTF_BFD_AMBIGUOUS back).
We use a forward declaration for the struct bfd in ctf-api.h, so that
ctf-api.h users are not required to pull in <bfd.h>. (This is mostly
for the sake of readelf.)
libctf/
* ctf-open-bfd.c: New file.
* ctf-open.c (ctf_close): New.
* ctf-impl.h: Include bfd.h.
(ctf_file): New members ctf_data_mmapped, ctf_data_mmapped_len.
(ctf_archive_internal): New members ctfi_abfd, ctfi_data,
ctfi_bfd_close.
(ctf_bfdopen_ctfsect): New declaration.
(_CTF_SECTION): likewise.
include/
* ctf-api.h (struct bfd): New forward.
(ctf_fdopen): New.
(ctf_bfdopen): Likewise.
(ctf_open): Likewise.
(ctf_arc_open): Likewise.
2019-04-24 17:46:39 +08:00
|
|
|
/* The converse of ctf_open(). ctf_open() disguises whatever it opens as an
|
|
|
|
archive, so closing one is just like closing an archive. */
|
|
|
|
void
|
|
|
|
ctf_close (ctf_archive_t *arc)
|
|
|
|
{
|
|
|
|
ctf_arc_close (arc);
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Get the CTF archive from which this ctf_dict_t is derived. */
|
libctf: mmappable archives
If you need to store a large number of CTF containers somewhere, this
provides a dedicated facility for doing so: an mmappable archive format
like a very simple tar or ar without all the system-dependent format
horrors or need for heavy file copying, with built-in compression of
files above a particular size threshold.
libctf automatically mmap()s uncompressed elements of these archives, or
uncompresses them, as needed. (If the platform does not support mmap(),
copying into dynamically-allocated buffers is used.)
Archive iteration operations are partitioned into raw and non-raw
forms. Raw operations pass thhe raw archive contents to the callback:
non-raw forms open each member with ctf_bufopen() and pass the resulting
ctf_file_t to the iterator instead. This lets you manipulate the raw
data in the archive, or the contents interpreted as a CTF file, as
needed.
It is not yet known whether we will store CTF archives in a linked ELF
object in one of these (akin to debugdata) or whether they'll get one
section per TU plus one parent container for types shared between them.
(In the case of ELF objects with very large numbers of TUs, an archive
of all of them would seem preferable, so we might just use an archive,
and add lzma support so you can assume that .gnu_debugdata and .ctf are
compressed using the same algorithm if both are present.)
To make usage easier, the ctf_archive_t is not the on-disk
representation but an abstraction over both ctf_file_t's and archives of
many ctf_file_t's: users see both CTF archives and raw CTF files as
ctf_archive_t's upon opening, the only difference being that a raw CTF
file has only a single "archive member", named ".ctf" (the default if a
null pointer is passed in as the name). The next commit will make use
of this facility, in addition to providing the public interface to
actually open archives. (In the future, it should be possible to have
all CTF sections in an ELF file appear as an "archive" in the same
fashion.)
This machinery is also used to allow library-internal creators of
ctf_archive_t's (such as the next commit) to stash away an ELF string
and symbol table, so that all opens of members in a given archive will
use them. This lets CTF archives exploit the ELF string and symbol
table just like raw CTF files can.
(All this leads to somewhat confusing type naming. The ctf_archive_t is
a typedef for the opaque internal type, struct ctf_archive_internal: the
non-internal "struct ctf_archive" is the on-disk structure meant for
other libraries manipulating CTF files. It is probably clearest to use
the struct name for struct ctf_archive_internal inside the program, and
the typedef names outside.)
libctf/
* ctf-archive.c: New.
* ctf-impl.h (ctf_archive_internal): New type.
(ctf_arc_open_internal): New declaration.
(ctf_arc_bufopen): Likewise.
(ctf_arc_close_internal): Likewise.
include/
* ctf.h (CTFA_MAGIC): New.
(struct ctf_archive): New.
(struct ctf_archive_modent): Likewise.
* ctf-api.h (ctf_archive_member_f): New.
(ctf_archive_raw_member_f): Likewise.
(ctf_arc_write): Likewise.
(ctf_arc_close): Likewise.
(ctf_arc_open_by_name): Likewise.
(ctf_archive_iter): Likewise.
(ctf_archive_raw_iter): Likewise.
(ctf_get_arc): Likewise.
2019-04-24 18:30:17 +08:00
|
|
|
ctf_archive_t *
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_get_arc (const ctf_dict_t *fp)
|
libctf: mmappable archives
If you need to store a large number of CTF containers somewhere, this
provides a dedicated facility for doing so: an mmappable archive format
like a very simple tar or ar without all the system-dependent format
horrors or need for heavy file copying, with built-in compression of
files above a particular size threshold.
libctf automatically mmap()s uncompressed elements of these archives, or
uncompresses them, as needed. (If the platform does not support mmap(),
copying into dynamically-allocated buffers is used.)
Archive iteration operations are partitioned into raw and non-raw
forms. Raw operations pass thhe raw archive contents to the callback:
non-raw forms open each member with ctf_bufopen() and pass the resulting
ctf_file_t to the iterator instead. This lets you manipulate the raw
data in the archive, or the contents interpreted as a CTF file, as
needed.
It is not yet known whether we will store CTF archives in a linked ELF
object in one of these (akin to debugdata) or whether they'll get one
section per TU plus one parent container for types shared between them.
(In the case of ELF objects with very large numbers of TUs, an archive
of all of them would seem preferable, so we might just use an archive,
and add lzma support so you can assume that .gnu_debugdata and .ctf are
compressed using the same algorithm if both are present.)
To make usage easier, the ctf_archive_t is not the on-disk
representation but an abstraction over both ctf_file_t's and archives of
many ctf_file_t's: users see both CTF archives and raw CTF files as
ctf_archive_t's upon opening, the only difference being that a raw CTF
file has only a single "archive member", named ".ctf" (the default if a
null pointer is passed in as the name). The next commit will make use
of this facility, in addition to providing the public interface to
actually open archives. (In the future, it should be possible to have
all CTF sections in an ELF file appear as an "archive" in the same
fashion.)
This machinery is also used to allow library-internal creators of
ctf_archive_t's (such as the next commit) to stash away an ELF string
and symbol table, so that all opens of members in a given archive will
use them. This lets CTF archives exploit the ELF string and symbol
table just like raw CTF files can.
(All this leads to somewhat confusing type naming. The ctf_archive_t is
a typedef for the opaque internal type, struct ctf_archive_internal: the
non-internal "struct ctf_archive" is the on-disk structure meant for
other libraries manipulating CTF files. It is probably clearest to use
the struct name for struct ctf_archive_internal inside the program, and
the typedef names outside.)
libctf/
* ctf-archive.c: New.
* ctf-impl.h (ctf_archive_internal): New type.
(ctf_arc_open_internal): New declaration.
(ctf_arc_bufopen): Likewise.
(ctf_arc_close_internal): Likewise.
include/
* ctf.h (CTFA_MAGIC): New.
(struct ctf_archive): New.
(struct ctf_archive_modent): Likewise.
* ctf-api.h (ctf_archive_member_f): New.
(ctf_archive_raw_member_f): Likewise.
(ctf_arc_write): Likewise.
(ctf_arc_close): Likewise.
(ctf_arc_open_by_name): Likewise.
(ctf_archive_iter): Likewise.
(ctf_archive_raw_iter): Likewise.
(ctf_get_arc): Likewise.
2019-04-24 18:30:17 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_archive;
|
|
|
|
}
|
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
/* Return the ctfsect out of the core ctf_impl. Useful for freeing the
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctfsect's data * after ctf_dict_close(), which is why we return the actual
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
structure, not a pointer to it, since that is likely to become a pointer to
|
|
|
|
freed data before the return value is used under the expected use case of
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_getsect()/ ctf_dict_close()/free(). */
|
libctf: avoid the need to ever use ctf_update
The method of operation of libctf when the dictionary is writable has
before now been that types that are added land in the dynamic type
section, which is a linked list and hash of IDs -> dynamic type
definitions (and, recently a hash of names): the DTDs are a bit of CTF
representing the ctf_type_t and ad hoc C structures representing the
vlen. Historically, libctf was unable to do anything with these types,
not even look them up by ID, let alone by name: if you wanted to do that
say if you were adding a type that depended on one you just added) you
called ctf_update, which serializes all the DTDs into a CTF file and
reopens it, copying its guts over the fp it's called with. The
ctf_updated types are then frozen in amber and unchangeable: all lookups
will return the types in the static portion in preference to the dynamic
portion, and we will refuse to re-add things that already exist in the
static portion (and, of late, in the dynamic portion too). The libctf
machinery remembers the boundary between static and dynamic types and
looks in the right portion for each type. Lots of things still don't
quite work with dynamic types (e.g. getting their size), but enough
works to do a bunch of additions and then a ctf_update, most of the
time.
Except it doesn't, because ctf_add_type finds it necessary to walk the
full dynamic type definition list looking for types with matching names,
so it gets slower and slower with every type you add: fixing this
requires calling ctf_update periodically for no other reason than to
avoid massively slowing things down.
This is all clunky and very slow but kind of works, until you consider
that it is in fact possible and indeed necessary to modify one sort of
type after it has been added: forwards. These are necessarily promoted
to structs, unions or enums, and when they do so *their type ID does not
change*. So all of a sudden we are changing types that already exist in
the static portion. ctf_update gets massively confused by this and
allocates space enough for the forward (with no members), but then emits
the new dynamic type (with all the members) into it. You get an
assertion failure after that, if you're lucky, or a coredump.
So this commit rejigs things a bit and arranges to exclusively use the
dynamic type definitions in writable dictionaries, and the static type
definitions in readable dictionaries: we don't at any time have a mixture
of static and dynamic types, and you don't need to call ctf_update to
make things "appear". The ctf_dtbyname hash I introduced a few months
ago, which maps things like "struct foo" to DTDs, is removed, replaced
instead by a change of type of the four dictionaries which track names.
Rather than just being (unresizable) ctf_hash_t's populated only at
ctf_bufopen time, they are now a ctf_names_t structure, which is a pair
of ctf_hash_t and ctf_dynhash_t, with the ctf_hash_t portion being used
in readonly dictionaries, and the ctf_dynhash_t being used in writable
ones. The decision as to which to use is centralized in the new
functions ctf_lookup_by_rawname (which takes a type kind) and
ctf_lookup_by_rawhash, which it calls (which takes a ctf_names_t *.)
This change lets us switch from using static to dynamic name hashes on
the fly across the entirety of libctf without complexifying anything: in
fact, because we now centralize the knowledge about how to map from type
kind to name hash, it actually simplifies things and lets us throw out
quite a lot of now-unnecessary complexity, from ctf_dtnyname (replaced
by the dynamic half of the name tables), through to ctf_dtnextid (now
that a dictionary's static portion is never referenced if the dictionary
is writable, we can just use ctf_typemax to indicate the maximum type:
dynamic or non-dynamic does not matter, and we no longer need to track
the boundary between the types). You can now ctf_rollback() as far as
you like, even past a ctf_update or for that matter a full writeout; all
the iteration functions work just as well on writable as on read-only
dictionaries; ctf_add_type no longer needs expensive duplicated code to
run over the dynamic types hunting for ones it might be interested in;
and the linker no longer needs a hack to call ctf_update so that calling
ctf_add_type is not impossibly expensive.
There is still a bit more complexity: some new code paths in ctf-types.c
need to know how to extract information from dynamic types. This
complexity will go away again in a few months when libctf acquires a
proper intermediate representation.
You can still call ctf_update if you like (it's public API, after all),
but its only effect now is to set the point to which ctf_discard rolls
back.
Obviously *something* still needs to serialize the CTF file before
writeout, and this job is done by ctf_serialize, which does everything
ctf_update used to except set the counter used by ctf_discard. It is
automatically called by the various functions that do CTF writeout:
nobody else ever needs to call it.
With this in place, forwards that are promoted to non-forwards no longer
crash the link, even if it happens tens of thousands of types later.
v5: fix tabdamage.
libctf/
* ctf-impl.h (ctf_names_t): New.
(ctf_lookup_t) <ctf_hash>: Now a ctf_names_t, not a ctf_hash_t.
(ctf_file_t) <ctf_structs>: Likewise.
<ctf_unions>: Likewise.
<ctf_enums>: Likewise.
<ctf_names>: Likewise.
<ctf_lookups>: Improve comment.
<ctf_ptrtab_len>: New.
<ctf_prov_strtab>: New.
<ctf_str_prov_offset>: New.
<ctf_dtbyname>: Remove, redundant to the names hashes.
<ctf_dtnextid>: Remove, redundant to ctf_typemax.
(ctf_dtdef_t) <dtd_name>: Remove.
<dtd_data>: Note that the ctt_name is now populated.
(ctf_str_atom_t) <csa_offset>: This is now the strtab
offset for internal strings too.
<csa_external_offset>: New, the external strtab offset.
(CTF_INDEX_TO_TYPEPTR): Handle the LCTF_RDWR case.
(ctf_name_table): New declaration.
(ctf_lookup_by_rawname): Likewise.
(ctf_lookup_by_rawhash): Likewise.
(ctf_set_ctl_hashes): Likewise.
(ctf_serialize): Likewise.
(ctf_dtd_insert): Adjust.
(ctf_simple_open_internal): Likewise.
(ctf_bufopen_internal): Likewise.
(ctf_list_empty_p): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_add): Returns uint32_t now.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Now returns a boolean (int).
* ctf-string.c (ctf_strraw_explicit): Check the ctf_prov_strtab
for strings in the appropriate range.
(ctf_str_create_atoms): Create the ctf_prov_strtab. Detect OOM
when adding the null string to the new strtab.
(ctf_str_free_atoms): Destroy the ctf_prov_strtab.
(ctf_str_add_ref_internal): Add make_provisional argument. If
make_provisional, populate the offset and fill in the
ctf_prov_strtab accordingly.
(ctf_str_add): Return the offset, not the string.
(ctf_str_add_ref): Likewise.
(ctf_str_add_external): Return a success integer.
(ctf_str_remove_ref): New, remove a single ref.
(ctf_str_count_strtab): Do not count the initial null string's
length or the existence or length of any unreferenced internal
atoms.
(ctf_str_populate_sorttab): Skip atoms with no refs.
(ctf_str_write_strtab): Populate the nullstr earlier. Add one
to the cts_len for the null string, since it is no longer done
in ctf_str_count_strtab. Adjust for csa_external_offset rename.
Populate the csa_offset for both internal and external cases.
Flush the ctf_prov_strtab afterwards, and reset the
ctf_str_prov_offset.
* ctf-create.c (ctf_grow_ptrtab): New.
(ctf_create): Call it. Initialize new fields rather than old
ones. Tell ctf_bufopen_internal that this is a writable dictionary.
Set the ctl hashes and data model.
(ctf_update): Rename to...
(ctf_serialize): ... this. Leave a compatibility function behind.
Tell ctf_simple_open_internal that this is a writable dictionary.
Pass the new fields along from the old dictionary. Drop
ctf_dtnextid and ctf_dtbyname. Use ctf_strraw, not dtd_name.
Do not zero out the DTD's ctt_name.
(ctf_prefixed_name): Rename to...
(ctf_name_table): ... this. No longer return a prefixed name: return
the applicable name table instead.
(ctf_dtd_insert): Use it, and use the right name table. Pass in the
kind we're adding. Migrate away from dtd_name.
(ctf_dtd_delete): Adjust similarly. Remove the ref to the
deleted ctt_name.
(ctf_dtd_lookup_type_by_name): Remove.
(ctf_dynamic_type): Always return NULL on read-only dictionaries.
No longer check ctf_dtnextid: check ctf_typemax instead.
(ctf_snapshot): No longer use ctf_dtnextid: use ctf_typemax instead.
(ctf_rollback): Likewise. No longer fail with ECTF_OVERROLLBACK. Use
ctf_name_table and the right name table, and migrate away from
dtd_name as in ctf_dtd_delete.
(ctf_add_generic): Pass in the kind explicitly and pass it to
ctf_dtd_insert. Use ctf_typemax, not ctf_dtnextid. Migrate away
from dtd_name to using ctf_str_add_ref to populate the ctt_name.
Grow the ptrtab if needed.
(ctf_add_encoded): Pass in the kind.
(ctf_add_slice): Likewise.
(ctf_add_array): Likewise.
(ctf_add_function): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_reftype): Likewise. Initialize the ctf_ptrtab, checking
ctt_name rather than dtd_name.
(ctf_add_struct_sized): Pass in the kind. Use
ctf_lookup_by_rawname, not ctf_hash_lookup_type /
ctf_dtd_lookup_type_by_name.
(ctf_add_union_sized): Likewise.
(ctf_add_enum): Likewise.
(ctf_add_enum_encoded): Likewise.
(ctf_add_forward): Likewise.
(ctf_add_type): Likewise.
(ctf_compress_write): Call ctf_serialize: adjust for ctf_size not
being initialized until after the call.
(ctf_write_mem): Likewise.
(ctf_write): Likewise.
* ctf-archive.c (arc_write_one_ctf): Likewise.
* ctf-lookup.c (ctf_lookup_by_name): Use ctf_lookuup_by_rawhash, not
ctf_hash_lookup_type.
(ctf_lookup_by_id): No longer check the readonly types if the
dictionary is writable.
* ctf-open.c (init_types): Assert that this dictionary is not
writable. Adjust to use the new name hashes, ctf_name_table,
and ctf_ptrtab_len. GNU style fix for the final ptrtab scan.
(ctf_bufopen_internal): New 'writable' parameter. Flip on LCTF_RDWR
if set. Drop out early when dictionary is writable. Split the
ctf_lookups initialization into...
(ctf_set_cth_hashes): ... this new function.
(ctf_simple_open_internal): Adjust. New 'writable' parameter.
(ctf_simple_open): Adjust accordingly.
(ctf_bufopen): Likewise.
(ctf_file_close): Destroy the appropriate name hashes. No longer
destroy ctf_dtbyname, which is gone.
(ctf_getdatasect): Remove spurious "extern".
* ctf-types.c (ctf_lookup_by_rawname): New, look up types in the
specified name table, given a kind.
(ctf_lookup_by_rawhash): Likewise, given a ctf_names_t *.
(ctf_member_iter): Add support for iterating over the
dynamic type list.
(ctf_enum_iter): Likewise.
(ctf_variable_iter): Likewise.
(ctf_type_rvisit): Likewise.
(ctf_member_info): Add support for types in the dynamic type list.
(ctf_enum_name): Likewise.
(ctf_enum_value): Likewise.
(ctf_func_type_info): Likewise.
(ctf_func_type_args): Likewise.
* ctf-link.c (ctf_accumulate_archive_names): No longer call
ctf_update.
(ctf_link_write): Likewise.
(ctf_link_intern_extern_string): Adjust for new
ctf_str_add_external return value.
(ctf_link_add_strtab): Likewise.
* ctf-util.c (ctf_list_empty_p): New.
2019-08-08 00:55:09 +08:00
|
|
|
ctf_sect_t
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_getdatasect (const ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_data;
|
|
|
|
}
|
|
|
|
|
2020-11-20 21:34:04 +08:00
|
|
|
ctf_sect_t
|
|
|
|
ctf_getsymsect (const ctf_dict_t *fp)
|
|
|
|
{
|
|
|
|
return fp->ctf_symtab;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctf_sect_t
|
|
|
|
ctf_getstrsect (const ctf_dict_t *fp)
|
|
|
|
{
|
|
|
|
return fp->ctf_strtab;
|
|
|
|
}
|
|
|
|
|
libctf, include: support foreign-endianness symtabs with CTF
The CTF symbol lookup machinery added recently has one deficit: it
assumes the symtab is in the machine's native endianness. This is
always true when the linker is writing out symtabs (because cross
linkers byteswap symbols only after libctf has been called on them), but
may be untrue in the cross case when the linker or another tool
(objdump, etc) is reading them.
Unfortunately the easy way to model this to the caller, as an endianness
field in the ctf_sect_t, is precluded because doing so would change the
size of the ctf_sect_t, which would be an ABI break. So, instead, allow
the endianness of the symtab to be set after open time, by calling one
of the two new API functions ctf_symsect_endianness (for ctf_dict_t's)
or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf
calls these functions automatically for objects opened via any of the
BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen,
ctf_open, or ctf_arc_open), but the various mechanisms that just take
raw ctf_sect_t's will assume the symtab is in native endianness and need
a later call to ctf_*symsect_endianness to adjust it if needed. (This
call is basically free if the endianness is actually native: it only
costs anything if the symtab endianness was previously guessed wrong,
and there is a symtab, and we are using it directly rather than using
symtab indexing.)
Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the
symtab endianness is correctly set will probably give wrong answers --
but you can set it at any time as long as it is before then.
include/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h: Style nit: remove () on function names in comments.
(ctf_sect_t): Mention endianness concerns.
(ctf_symsect_endianness): New declaration.
(ctf_arc_symsect_endianness): Likewise.
libctf/ChangeLog
2020-11-23 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New.
(struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise.
* ctf-create.c (ctf_serialize): Adjust for new field.
* ctf-open.c (init_symtab): Note the semantics of repeated calls.
(ctf_symsect_endianness): New.
(ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for
the native endianness.
(_Static_assert): Moved...
(swap_thing): ... with this...
* swap.h: ... to here.
* ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the
Elf32_Sym if the ctf_symtab_little_endian demands it.
(ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed.
* ctf-archive.c (ctf_arc_symsect_endianness): New, set the
endianness of the symtab used by the dicts in an archive.
(ctf_archive_iter_internal): Initialize to unknown (assumed native,
do not call ctf_symsect_endianness).
(ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be.
(ctf_dict_open_internal): Propagate the endianness down.
(ctf_dict_open_sections): Likewise.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the
struct bfd and pass it down to the archive.
* libctf.ver: Add ctf_symsect_endianness and
ctf_arc_symsect_endianness.
2020-11-24 05:17:44 +08:00
|
|
|
/* Set the endianness of the symbol table attached to FP. */
|
|
|
|
void
|
|
|
|
ctf_symsect_endianness (ctf_dict_t *fp, int little_endian)
|
|
|
|
{
|
|
|
|
int old_endianness = fp->ctf_symsect_little_endian;
|
|
|
|
|
|
|
|
fp->ctf_symsect_little_endian = !!little_endian;
|
|
|
|
|
|
|
|
/* If we already have a symtab translation table, we need to repopulate it if
|
|
|
|
our idea of the endianness has changed. */
|
|
|
|
|
|
|
|
if (old_endianness != fp->ctf_symsect_little_endian
|
|
|
|
&& fp->ctf_sxlate != NULL && fp->ctf_symtab.cts_data != NULL)
|
|
|
|
assert (init_symtab (fp, fp->ctf_header, &fp->ctf_symtab) == 0);
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Return the CTF handle for the parent CTF dict, if one exists. Otherwise
|
|
|
|
return NULL to indicate this dict has no imported parent. */
|
|
|
|
ctf_dict_t *
|
|
|
|
ctf_parent_dict (ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_parent;
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Backward compatibility. */
|
|
|
|
ctf_dict_t *
|
|
|
|
ctf_parent_file (ctf_dict_t *fp)
|
|
|
|
{
|
|
|
|
return ctf_parent_dict (fp);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return the name of the parent CTF dict, if one exists, or NULL otherwise. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
const char *
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_parent_name (ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_parname;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the parent name. It is an error to call this routine without calling
|
|
|
|
ctf_import() at some point. */
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_parent_name_set (ctf_dict_t *fp, const char *name)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
if (fp->ctf_dynparname != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_dynparname);
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_dynparname = strdup (name)) == NULL)
|
|
|
|
return (ctf_set_errno (fp, ENOMEM));
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_parname = fp->ctf_dynparname;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
return 0;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
|
|
|
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
/* Return the name of the compilation unit this CTF file applies to. Usually
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
non-NULL only for non-parent dicts. */
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
const char *
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_cuname (ctf_dict_t *fp)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_cuname;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the compilation unit name. */
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_cuname_set (ctf_dict_t *fp, const char *name)
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
{
|
|
|
|
if (fp->ctf_dyncuname != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
free (fp->ctf_dyncuname);
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((fp->ctf_dyncuname = strdup (name)) == NULL)
|
|
|
|
return (ctf_set_errno (fp, ENOMEM));
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
fp->ctf_cuname = fp->ctf_dyncuname;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
return 0;
|
libctf: allow the header to change between versions
libctf supports dynamic upgrading of the type table as file format
versions change, but before now has not supported changes to the CTF
header. Doing this is complicated by the baroque storage method used:
the CTF header is kept prepended to the rest of the CTF data, just as
when read from the file, and written out from there, and is
endian-flipped in place.
This makes accessing it needlessly hard and makes it almost impossible
to make the header larger if we add fields. The general storage
machinery around the malloced ctf pointer (the 'ctf_base') is also
overcomplicated: the pointer is sometimes malloced locally and sometimes
assigned from a parameter, so freeing it requires checking to see if
that parameter was used, needlessly coupling ctf_bufopen and
ctf_file_close together.
So split the header out into a new ctf_file_t.ctf_header, which is
written out explicitly: squeeze it out of the CTF buffer whenever we
reallocate it, and use ctf_file_t.ctf_buf to skip past the header when
we do not need to reallocate (when no upgrading or endian-flipping is
required). We now track whether the CTF base can be freed explicitly
via a new ctf_dynbase pointer which is non-NULL only when freeing is
possible.
With all this done, we can upgrade the header on the fly and add new
fields as desired, via a new upgrade_header function in ctf-open.
As with other forms of upgrading, libctf upgrades older headers
automatically to the latest supported version at open time.
For a first use of this field, we add a new string field cth_cuname, and
a corresponding setter/getter pair ctf_cuname_set and ctf_cuname: this
is used by debuggers to determine whether a CTF section's types relate
to a single compilation unit, or to all compilation units in the
program. (Types with ambiguous definitions in different CUs have only
one of these types placed in the top-level shared .ctf container: the
rest are placed in much smaller per-CU containers, which have the shared
container as their parent. Since CTF must be useful in the absence of
DWARF, we store the names of the relevant CUs ourselves, so the debugger
can look them up.)
v5: fix tabdamage.
include/
* ctf-api.h (ctf_cuname): New function.
(ctf_cuname_set): Likewise.
* ctf.h: Improve comment around upgrading, no longer
implying that v2 is the target of upgrades (it is v3 now).
(ctf_header_v2_t): New, old-format header for backward
compatibility.
(ctf_header_t): Add cth_cuname: this is the first of several
header changes in format v3.
libctf/
* ctf-impl.h (ctf_file_t): New fields ctf_header, ctf_dynbase,
ctf_cuname, ctf_dyncuname: ctf_base and ctf_buf are no longer const.
* ctf-open.c (ctf_set_base): Preserve the gap between ctf_buf and
ctf_base: do not assume that it is always sizeof (ctf_header_t).
Print out ctf_cuname: only print out ctf_parname if set.
(ctf_free_base): Removed, ctf_base is no longer freed: free
ctf_dynbase instead.
(ctf_set_version): Fix spacing.
(upgrade_header): New, in-place header upgrading.
(upgrade_types): Rename to...
(upgrade_types_v1): ... this. Free ctf_dynbase, not ctf_base. No
longer track old and new headers separately. No longer allow for
header sizes explicitly: squeeze the headers out on upgrade (they
are preserved in fp->ctf_header). Set ctf_dynbase, ctf_base and
ctf_buf explicitly. Use ctf_free, not ctf_free_base.
(upgrade_types): New, also handle ctf_parmax updating.
(flip_header): Flip ctf_cuname.
(flip_types): Flip BUF explicitly rather than deriving BUF from
BASE.
(ctf_bufopen): Store the header in fp->ctf_header. Correct minimum
required alignment of objtoff and funcoff. No longer store it in
the ctf_buf unless that buf is derived unmodified from the input.
Set ctf_dynbase where ctf_base is dynamically allocated. Drop locals
that duplicate fields in ctf_file: move allocation of ctf_file
further up instead. Call upgrade_header as needed. Move
version-specific ctf_parmax initialization into upgrade_types. More
concise error handling.
(ctf_file_close): No longer test for null pointers before freeing.
Free ctf_dyncuname, ctf_dynbase, and ctf_header. Do not call
ctf_free_base.
(ctf_cuname): New.
(ctf_cuname_set): New.
* ctf-create.c (ctf_update): Populate ctf_cuname.
(ctf_gzwrite): Write out the header explicitly. Remove obsolescent
comment.
(ctf_write): Likewise.
(ctf_compress_write): Get the header from ctf_header, not ctf_base.
Fix the compression length: fp->ctf_size never counted the CTF
header. Simplify the compress call accordingly.
2019-07-07 00:36:21 +08:00
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Import the types from the specified parent dict by storing a pointer to it in
|
|
|
|
ctf_parent and incrementing its reference count. Only one parent is allowed:
|
libctf: fix lookups of pointers by name in parent dicts
When you look up a type by name using ctf_lookup_by_name, in most cases
libctf can just strip off any qualifiers and look for the name, but for
pointer types this doesn't work, since the caller will want the pointer
type itself. But pointer types are nameless, and while they cite the
types they point to, looking up a type by name requires a link going the
*other way*, from the type pointed to to the pointer type that points to
it.
libctf has always built this up at open time: ctf_ptrtab is an array of
type indexes pointing from the index of every type to the index of the
type that points to it. But because it is built up at open time (and
because it uses type indexes and not type IDs) it is restricted to
working within a single dict and ignoring parent/child
relationships. This is normally invisible, unless you manage to get a
dict with a type in the parent but the only pointer to it in a child.
The ctf_ptrtab will not track this relationship, so lookups of this
pointer type by name will fail. Since which type is in the parent and
which in the child is largely opaque to the user (which goes where is up
to the deduplicator, and it can and does reshuffle things to save
space), this leads to a very bad user experience, with an
obviously-visible pointer type which ctf_lookup_by_name claims doesn't
exist.
The fix is to have another array, ctf_pptrtab, which is populated in
child dicts: like the parent's ctf_ptrtab, it has one element per type
in the parent, but is all zeroes except for those types which are
pointed to by types in the child: so it maps parent dict indices to
child dict indices. The array is grown, and new child types scanned,
whenever a lookup happens and new types have been added to the child
since the last time a lookup happened that might need the pptrtab.
(So for non-writable dicts, this only happens once, since new types
cannot be added to non-writable dicts at all.)
Since this introduces new complexity (involving updating only part of
the ctf_pptrtab) which is only seen when a writable dict is in use, we
introduce a new libctf-writable testsuite that contains lookup tests
with no corresponding CTF-containing .c files (which can thus be run
even on platforms with no .ctf-section support in the linker yet), and
add a test to check that creation of pointers in children to types in
parents and a following lookup by name works as expected. The non-
writable case is tested in a new libctf-regression testsuite which is
used to track now-fixed outright bugs in libctf.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_pptrtab>: New.
<ctf_pptrtab_len>: New.
<ctf_pptrtab_typemax>: New.
* ctf-create.c (ctf_serialize): Update accordingly.
(ctf_add_reftype): Note that we don't need to update pptrtab here,
despite updating ptrtab.
* ctf-open.c (ctf_dict_close): Destroy the pptrtab.
(ctf_import): Likewise.
(ctf_import_unref): Likewise.
* ctf-lookup.c (grow_pptrtab): New.
(refresh_pptrtab): New, update a pptrtab.
(ctf_lookup_by_name): Turn into a wrapper around (and rename to)...
(ctf_lookup_by_name_internal): ... this: construct the pptrtab, and
use it in addition to the parent's ptrtab when parent dicts are
searched.
* testsuite/libctf-regression/regression.exp: New testsuite for
regression tests.
* testsuite/libctf-regression/pptrtab*: New test.
* testsuite/libctf-writable/writable.exp: New testsuite for tests of
writable CTF dicts.
* testsuite/libctf-writable/pptrtab*: New test.
2021-01-05 21:25:56 +08:00
|
|
|
if a parent already exists, it is replaced by the new parent. The pptrtab
|
|
|
|
is wiped, and will be refreshed by the next ctf_lookup_by_name call. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_import (ctf_dict_t *fp, ctf_dict_t *pfp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
if (fp == NULL || fp == pfp || (pfp != NULL && pfp->ctf_refcnt == 0))
|
|
|
|
return (ctf_set_errno (fp, EINVAL));
|
|
|
|
|
|
|
|
if (pfp != NULL && pfp->ctf_dmodel != fp->ctf_dmodel)
|
|
|
|
return (ctf_set_errno (fp, ECTF_DMODEL));
|
|
|
|
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
if (fp->ctf_parent && !fp->ctf_parent_unreffed)
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_close (fp->ctf_parent);
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
fp->ctf_parent = NULL;
|
|
|
|
|
libctf: fix lookups of pointers by name in parent dicts
When you look up a type by name using ctf_lookup_by_name, in most cases
libctf can just strip off any qualifiers and look for the name, but for
pointer types this doesn't work, since the caller will want the pointer
type itself. But pointer types are nameless, and while they cite the
types they point to, looking up a type by name requires a link going the
*other way*, from the type pointed to to the pointer type that points to
it.
libctf has always built this up at open time: ctf_ptrtab is an array of
type indexes pointing from the index of every type to the index of the
type that points to it. But because it is built up at open time (and
because it uses type indexes and not type IDs) it is restricted to
working within a single dict and ignoring parent/child
relationships. This is normally invisible, unless you manage to get a
dict with a type in the parent but the only pointer to it in a child.
The ctf_ptrtab will not track this relationship, so lookups of this
pointer type by name will fail. Since which type is in the parent and
which in the child is largely opaque to the user (which goes where is up
to the deduplicator, and it can and does reshuffle things to save
space), this leads to a very bad user experience, with an
obviously-visible pointer type which ctf_lookup_by_name claims doesn't
exist.
The fix is to have another array, ctf_pptrtab, which is populated in
child dicts: like the parent's ctf_ptrtab, it has one element per type
in the parent, but is all zeroes except for those types which are
pointed to by types in the child: so it maps parent dict indices to
child dict indices. The array is grown, and new child types scanned,
whenever a lookup happens and new types have been added to the child
since the last time a lookup happened that might need the pptrtab.
(So for non-writable dicts, this only happens once, since new types
cannot be added to non-writable dicts at all.)
Since this introduces new complexity (involving updating only part of
the ctf_pptrtab) which is only seen when a writable dict is in use, we
introduce a new libctf-writable testsuite that contains lookup tests
with no corresponding CTF-containing .c files (which can thus be run
even on platforms with no .ctf-section support in the linker yet), and
add a test to check that creation of pointers in children to types in
parents and a following lookup by name works as expected. The non-
writable case is tested in a new libctf-regression testsuite which is
used to track now-fixed outright bugs in libctf.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_pptrtab>: New.
<ctf_pptrtab_len>: New.
<ctf_pptrtab_typemax>: New.
* ctf-create.c (ctf_serialize): Update accordingly.
(ctf_add_reftype): Note that we don't need to update pptrtab here,
despite updating ptrtab.
* ctf-open.c (ctf_dict_close): Destroy the pptrtab.
(ctf_import): Likewise.
(ctf_import_unref): Likewise.
* ctf-lookup.c (grow_pptrtab): New.
(refresh_pptrtab): New, update a pptrtab.
(ctf_lookup_by_name): Turn into a wrapper around (and rename to)...
(ctf_lookup_by_name_internal): ... this: construct the pptrtab, and
use it in addition to the parent's ptrtab when parent dicts are
searched.
* testsuite/libctf-regression/regression.exp: New testsuite for
regression tests.
* testsuite/libctf-regression/pptrtab*: New test.
* testsuite/libctf-writable/writable.exp: New testsuite for tests of
writable CTF dicts.
* testsuite/libctf-writable/pptrtab*: New test.
2021-01-05 21:25:56 +08:00
|
|
|
free (fp->ctf_pptrtab);
|
|
|
|
fp->ctf_pptrtab = NULL;
|
|
|
|
fp->ctf_pptrtab_len = 0;
|
|
|
|
fp->ctf_pptrtab_typemax = 0;
|
|
|
|
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
if (pfp != NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
{
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
int err;
|
|
|
|
|
|
|
|
if (fp->ctf_parname == NULL)
|
|
|
|
if ((err = ctf_parent_name_set (fp, "PARENT")) < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
fp->ctf_flags |= LCTF_CHILD;
|
|
|
|
pfp->ctf_refcnt++;
|
|
|
|
fp->ctf_parent_unreffed = 0;
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
}
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
fp->ctf_parent = pfp;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Like ctf_import, but does not increment the refcount on the imported parent
|
|
|
|
or close it at any point: as a result it can go away at any time and the
|
|
|
|
caller must do all freeing itself. Used internally to avoid refcount
|
|
|
|
loops. */
|
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_import_unref (ctf_dict_t *fp, ctf_dict_t *pfp)
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
{
|
|
|
|
if (fp == NULL || fp == pfp || (pfp != NULL && pfp->ctf_refcnt == 0))
|
|
|
|
return (ctf_set_errno (fp, EINVAL));
|
|
|
|
|
|
|
|
if (pfp != NULL && pfp->ctf_dmodel != fp->ctf_dmodel)
|
|
|
|
return (ctf_set_errno (fp, ECTF_DMODEL));
|
|
|
|
|
|
|
|
if (fp->ctf_parent && !fp->ctf_parent_unreffed)
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_dict_close (fp->ctf_parent);
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
fp->ctf_parent = NULL;
|
|
|
|
|
libctf: fix lookups of pointers by name in parent dicts
When you look up a type by name using ctf_lookup_by_name, in most cases
libctf can just strip off any qualifiers and look for the name, but for
pointer types this doesn't work, since the caller will want the pointer
type itself. But pointer types are nameless, and while they cite the
types they point to, looking up a type by name requires a link going the
*other way*, from the type pointed to to the pointer type that points to
it.
libctf has always built this up at open time: ctf_ptrtab is an array of
type indexes pointing from the index of every type to the index of the
type that points to it. But because it is built up at open time (and
because it uses type indexes and not type IDs) it is restricted to
working within a single dict and ignoring parent/child
relationships. This is normally invisible, unless you manage to get a
dict with a type in the parent but the only pointer to it in a child.
The ctf_ptrtab will not track this relationship, so lookups of this
pointer type by name will fail. Since which type is in the parent and
which in the child is largely opaque to the user (which goes where is up
to the deduplicator, and it can and does reshuffle things to save
space), this leads to a very bad user experience, with an
obviously-visible pointer type which ctf_lookup_by_name claims doesn't
exist.
The fix is to have another array, ctf_pptrtab, which is populated in
child dicts: like the parent's ctf_ptrtab, it has one element per type
in the parent, but is all zeroes except for those types which are
pointed to by types in the child: so it maps parent dict indices to
child dict indices. The array is grown, and new child types scanned,
whenever a lookup happens and new types have been added to the child
since the last time a lookup happened that might need the pptrtab.
(So for non-writable dicts, this only happens once, since new types
cannot be added to non-writable dicts at all.)
Since this introduces new complexity (involving updating only part of
the ctf_pptrtab) which is only seen when a writable dict is in use, we
introduce a new libctf-writable testsuite that contains lookup tests
with no corresponding CTF-containing .c files (which can thus be run
even on platforms with no .ctf-section support in the linker yet), and
add a test to check that creation of pointers in children to types in
parents and a following lookup by name works as expected. The non-
writable case is tested in a new libctf-regression testsuite which is
used to track now-fixed outright bugs in libctf.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h (ctf_dict_t) <ctf_pptrtab>: New.
<ctf_pptrtab_len>: New.
<ctf_pptrtab_typemax>: New.
* ctf-create.c (ctf_serialize): Update accordingly.
(ctf_add_reftype): Note that we don't need to update pptrtab here,
despite updating ptrtab.
* ctf-open.c (ctf_dict_close): Destroy the pptrtab.
(ctf_import): Likewise.
(ctf_import_unref): Likewise.
* ctf-lookup.c (grow_pptrtab): New.
(refresh_pptrtab): New, update a pptrtab.
(ctf_lookup_by_name): Turn into a wrapper around (and rename to)...
(ctf_lookup_by_name_internal): ... this: construct the pptrtab, and
use it in addition to the parent's ptrtab when parent dicts are
searched.
* testsuite/libctf-regression/regression.exp: New testsuite for
regression tests.
* testsuite/libctf-regression/pptrtab*: New test.
* testsuite/libctf-writable/writable.exp: New testsuite for tests of
writable CTF dicts.
* testsuite/libctf-writable/pptrtab*: New test.
2021-01-05 21:25:56 +08:00
|
|
|
free (fp->ctf_pptrtab);
|
|
|
|
fp->ctf_pptrtab = NULL;
|
|
|
|
fp->ctf_pptrtab_len = 0;
|
|
|
|
fp->ctf_pptrtab_typemax = 0;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
if (pfp != NULL)
|
|
|
|
{
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
int err;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
|
|
|
|
if (fp->ctf_parname == NULL)
|
libctf: remove ctf_malloc, ctf_free and ctf_strdup
These just get in the way of auditing for erroneous usage of strdup and
add a huge irregular surface of "ctf_malloc or malloc? ctf_free or free?
ctf_strdup or strdup?"
ctf_malloc and ctf_free usage has not reliably matched up for many
years, if ever, making the whole game pointless.
Go back to malloc, free, and strdup like everyone else: while we're at
it, fix a bunch of places where we weren't properly checking for OOM.
This changes the interface of ctf_cuname_set and ctf_parent_name_set,
which could strdup but could not return errors (like ENOMEM).
New in v4.
include/
* ctf-api.h (ctf_cuname_set): Can now fail, returning int.
(ctf_parent_name_set): Likewise.
libctf/
* ctf-impl.h (ctf_alloc): Remove.
(ctf_free): Likewise.
(ctf_strdup): Likewise.
* ctf-subr.c (ctf_alloc): Remove.
(ctf_free): Likewise.
* ctf-util.c (ctf_strdup): Remove.
* ctf-create.c (ctf_serialize): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dtd_delete): Likewise.
(ctf_dvd_delete): Likewise.
(ctf_add_generic): Likewise.
(ctf_add_function): Likewise.
(ctf_add_enumerator): Likewise.
(ctf_add_member_offset): Likewise.
(ctf_add_variable): Likewise.
(membadd): Likewise.
(ctf_compress_write): Likewise.
(ctf_write_mem): Likewise.
* ctf-decl.c (ctf_decl_push): Likewise.
(ctf_decl_fini): Likewise.
(ctf_decl_sprintf): Likewise. Check for OOM.
* ctf-dump.c (ctf_dump_append): Use malloc, not ctf_alloc; free, not
ctf_free; strdup, not ctf_strdup.
(ctf_dump_free): Likewise.
(ctf_dump): Likewise.
* ctf-open.c (upgrade_types_v1): Likewise.
(init_types): Likewise.
(ctf_file_close): Likewise.
(ctf_bufopen_internal): Likewise. Check for OOM.
(ctf_parent_name_set): Likewise: report the OOM to the caller.
(ctf_cuname_set): Likewise.
(ctf_import): Likewise.
* ctf-string.c (ctf_str_purge_atom_refs): Use malloc, not ctf_alloc;
free, not ctf_free; strdup, not ctf_strdup.
(ctf_str_free_atom): Likewise.
(ctf_str_create_atoms): Likewise.
(ctf_str_add_ref_internal): Likewise.
(ctf_str_remove_ref): Likewise.
(ctf_str_write_strtab): Likewise.
2019-09-17 13:54:23 +08:00
|
|
|
if ((err = ctf_parent_name_set (fp, "PARENT")) < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
fp->ctf_flags |= LCTF_CHILD;
|
libctf: sort out potential refcount loops
When you link TUs that contain conflicting types together, the resulting
CTF section is an archive containing many CTF dicts. These dicts appear
in ctf_link_outputs of the shared dict, with each ctf_import'ing that
shared dict. ctf_importing a dict bumps its refcount to stop it going
away while it's in use -- but if the shared dict (whose refcount is
bumped) has the child dict (doing the bumping) in its ctf_link_outputs,
we have a refcount loop, since the child dict only un-ctf_imports and
drops the parent's refcount when it is freed, but the child is only
freed when the parent's refcount falls to zero.
(In the future, this will be able to go wrong on the inputs too, when an
ld -r'ed deduplicated output with conflicts is relinked. Right now this
cannot happen because we don't ctf_import such dicts at all. This will
be fixed in a later commit in this series.)
Fix this by introducing an internal-use-only ctf_import_unref function
that imports a parent dict *witthout* bumping the parent's refcount, and
using it when we create per-CU outputs. This function is only safe to
use if you know the parent cannot go away while the child exists: but if
the parent *owns* the child, as here, this is necessarily true.
Record in the ctf_file_t whether a parent was imported via ctf_import or
ctf_import_unref, so that if you do another ctf_import later on (or a
ctf_import_unref) it can decide whether to drop the refcount of the
existing parent being replaced depending on which function you used to
import that one. Adjust ctf_serialize so that rather than doing a
ctf_import (which is wrong if the original import was
ctf_import_unref'fed), we just copy the parent field and refcount over
and forcibly flip the unref flag on on the old copy we are going to
discard.
ctf_file_close also needs a bit of tweaking to only close the parent if
it was not imported with ctf_import_unref: while we're at it, guard
against repeated closes with a refcount of zero and stop them causing
double-frees, even if destruction of things freed *inside*
ctf_file_close cause such recursion.
Verified no leaks or accesses to freed memory after all of this with
valgrind. (It was leak-happy before.)
libctf/
* ctf-impl.c (ctf_file_t) <ctf_parent_unreffed>: New.
(ctf_import_unref): New.
* ctf-open.c (ctf_file_close) Drop the refcount all the way to
zero. Don't recurse back in if the refcount is already zero.
(ctf_import): Check ctf_parent_unreffed before deciding whether
to close a pre-existing parent. Set it to zero.
(ctf_import_unreffed): New, as above, setting
ctf_parent_unreffed to 1.
* ctf-create.c (ctf_serialize): Do not ctf_import into the new
child: use direct assignment, and set unreffed on the new and
old children.
* ctf-link.c (ctf_create_per_cu): Import the parent using
ctf_import_unreffed.
2020-06-05 00:30:01 +08:00
|
|
|
fp->ctf_parent_unreffed = 1;
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
}
|
2019-09-17 13:59:31 +08:00
|
|
|
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
fp->ctf_parent = pfp;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Set the data model constant for the CTF dict. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_setmodel (ctf_dict_t *fp, int model)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
const ctf_dmodel_t *dp;
|
|
|
|
|
|
|
|
for (dp = _libctf_models; dp->ctd_name != NULL; dp++)
|
|
|
|
{
|
|
|
|
if (dp->ctd_code == model)
|
|
|
|
{
|
|
|
|
fp->ctf_dmodel = dp;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return (ctf_set_errno (fp, EINVAL));
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* Return the data model constant for the CTF dict. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
int
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_getmodel (ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_dmodel->ctd_code;
|
|
|
|
}
|
|
|
|
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
/* The caller can hang an arbitrary pointer off each ctf_dict_t using this
|
libctf: fix a number of build problems found on Solaris and NetBSD
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
2019-05-31 17:10:51 +08:00
|
|
|
function. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
void
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_setspecific (ctf_dict_t *fp, void *data)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
fp->ctf_specific = data;
|
|
|
|
}
|
|
|
|
|
libctf: fix a number of build problems found on Solaris and NetBSD
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
2019-05-31 17:10:51 +08:00
|
|
|
/* Retrieve the arbitrary pointer again. */
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
void *
|
libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
2020-11-20 21:34:04 +08:00
|
|
|
ctf_getspecific (ctf_dict_t *fp)
|
libctf: opening
This fills in the other half of the opening/creation puzzle: opening of
already-existing CTF files. Such files are always read-only: if you
want to add to a CTF file opened with one of the opening functions in
this file, use ctf_add_type(), in a later commit, to copy appropriate
types into a newly ctf_create()d, writable container.
The lowest-level opening functions are in here: ctf_bufopen(), which
takes ctf_sect_t structures akin to ELF section headers, and
ctf_simple_open(), which can be used if you don't have an entire ELF
section header to work from. Both will malloc() new space for the
buffers only if necessary, will mmap() directly from the file if
requested, and will mprotect() it afterwards to prevent accidental
corruption of the types. These functions are also used by ctf_update()
when converting types in a writable container into read-only types that
can be looked up using the lookup functions (in later commits).
The files are always of the native endianness of the system that created
them: at read time, the endianness of the header magic number is used to
determine whether or not the file needs byte-swapping, and the entire
thing is aggressively byte-swapped.
The agggressive nature of this swapping avoids complicating the rest of
the code with endianness conversions, while the native endianness
introduces no byte-swapping overhead in the common case. (The
endianness-independence code is also much newer than everything else in
this file, and deserves closer scrutiny.)
The accessors at the top of the file are there to transparently support
older versions of the CTF file format, allowing translation from older
formats that have different sizes for the structures in ctf.h:
currently, these older formats are intermingled with the newer ones in
ctf.h: they will probably migrate to a compatibility header in time, to
ease readability. The ctf_set_base() function is split out for the same
reason: when conversion code to a newer format is written, it would need
to malloc() new storage for the entire ctf_file_t if a file format
change causes it to grow, and for that we need ctf_set_base() to be a
separate function.
One pair of linked data structures supported by this file has no
creation code in libctf yet: the data and function object sections read
by init_symtab(). These will probably arrive soon, when the linker comes
to need them. (init_symtab() has hardly been changed since 2009, but if
any code in libctf has rotted over time, this will.)
A few simple accessors are also present that can even be called on
read-only containers because they don't actually modify them, since the
relevant things are not stored in the container but merely change its
operation: ctf_setmodel(), which lets you specify whether a container is
LP64 or not (used to statically determine the sizes of a few types),
ctf_import(), which is the only way to associate a parent container with
a child container, and ctf_setspecific(), which lets the caller
associate an arbitrary pointer with the CTF container for any use. If
the user doesn't call these functions correctly, libctf will misbehave:
this is particularly important for ctf_import(), since a container built
against a given parent container will not be able to resolve types that
depend on types in the parent unless it is ctf_import()ed with a parent
container with the same set of types at the same IDs, or a superset.
Possible future extensions (also noted in the ctf-hash.c file) include
storing a count of things so that we don't need to do one pass over the
CTF file counting everything, and computing a perfect hash at CTF
creation time in some compact form, storing it in the CTF file, and
using it to hash things so we don't need to do a second pass over the
entire CTF file to set up the hashes used to go from names to type IDs.
(There are multiple such hashes, one for each C type namespace: types,
enums, structs, and unions.)
libctf/
* ctf-open.c: New file.
* swap.h: Likewise.
include/
* ctf-api.h (ctf_file_close): New declaration.
(ctf_getdatasect): Likewise.
(ctf_parent_file): Likewise.
(ctf_parent_name): Likewise.
(ctf_parent_name_set): Likewise.
(ctf_import): Likewise.
(ctf_setmodel): Likewise.
(ctf_getmodel): Likewise.
(ctf_setspecific): Likewise.
(ctf_getspecific): Likewise.
2019-04-24 17:17:13 +08:00
|
|
|
{
|
|
|
|
return fp->ctf_specific;
|
|
|
|
}
|