autoconf/acgeneral.m4
Akim Demaille 3e56675bc8 A single m4_require is enough.
* m4sugar.m4 (_m4_require): $2 defaults to $1.
Rename as...
(m4_require): this.
* acgeneral.m4 (_AC_REQUIRE): Remove, use m4_require if you want
to get into the gory details.
2000-11-14 11:06:37 +00:00

4744 lines
150 KiB
Plaintext

# This file is part of Autoconf. -*- Autoconf -*-
# Parameterized macros.
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000
# Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
#
# As a special exception, the Free Software Foundation gives unlimited
# permission to copy, distribute and modify the configure scripts that
# are the output of Autoconf. You need not follow the terms of the GNU
# General Public License when using or distributing such scripts, even
# though portions of the text of Autoconf appear in them. The GNU
# General Public License (GPL) does govern all other use of the material
# that constitutes the Autoconf program.
#
# Certain portions of the Autoconf source text are designed to be copied
# (in certain cases, depending on the input) into the output of
# Autoconf. We call these the "data" portions. The rest of the Autoconf
# source text consists of comments plus executable code that decides which
# of the data portions to output in any given case. We call these
# comments and executable code the "non-data" portions. Autoconf never
# copies any of the non-data portions into its output.
#
# This special exception to the GPL applies to versions of Autoconf
# released by the Free Software Foundation. When you make and
# distribute a modified version of Autoconf, you may extend this special
# exception to the GPL to apply to your modified version as well, *unless*
# your modified version has the potential to copy into its output some
# of the text that was the non-data portion of the version that you started
# with. (In other words, unless your change moves or copies text from
# the non-data portions to the data portions.) If your modification has
# such potential, you must delete any notice of this special exception
# to the GPL from your modified version.
#
# Written by David MacKenzie, with help from
# Franc,ois Pinard, Karl Berry, Richard Pixley, Ian Lance Taylor,
# Roland McGrath, Noah Friedman, david d zuhn, and many others.
## ---------------- ##
## The diversions. ##
## ---------------- ##
# We heavily use m4's diversions both for the initializations and for
# required macros (see AC_REQUIRE), because in both cases we have to
# issue high in `configure' something which is discovered late.
#
# KILL is only used to suppress output.
#
# The layers of `configure'. We let m4 undivert them by itself, when
# it reaches the end of `configure.in'.
#
# - BINSH
# AC_REQUIRE'd #! /bin/sh line
# - REVISION
# Sent by AC_REVISION
# - NOTICE
# copyright notice(s)
# - DEFAULTS
# early initializations (defaults)
# - PARSE_ARGS
# initialization code, option handling loop.
#
# - HELP_BEGIN
# Handling `configure --help'.
# - HELP_CANON
# Help msg for AC_CANONICAL_*
# - HELP_ENABLE
# Help msg from AC_ARG_ENABLE.
# - HELP_WITH
# Help msg from AC_ARG_WITH.
# - HELP_VAR
# Help msg from AC_ARG_VAR.
# - HELP_VAR_END
# A small paragraph on the use of the variables.
# - HELP_END
# Tail of the handling of --help.
#
# - VERSION_BEGIN
# Copyright notice for --version.
# - VERSION_END
# Tail of the handling of --version.
#
# - INIT_PREPARE
# Tail of initialization code.
#
# - BODY
# the tests and output code
#
# _m4_divert(DIVERSION-NAME)
# --------------------------
# Convert a diversion name into its number. Otherwise, return
# DIVERSION-NAME which is supposed to be an actual diversion number.
# Of course it would be nicer to use m4_case here, instead of zillions
# of little macros, but it then takes twice longer to run `autoconf'!
m4_define([_m4_divert(KILL)], -1)
m4_define([_m4_divert(BINSH)], 0)
m4_define([_m4_divert(REVISION)], 1)
m4_define([_m4_divert(NOTICE)], 2)
m4_define([_m4_divert(DEFAULTS)], 3)
m4_define([_m4_divert(PARSE_ARGS)], 4)
m4_define([_m4_divert(HELP_BEGIN)], 10)
m4_define([_m4_divert(HELP_CANON)], 11)
m4_define([_m4_divert(HELP_ENABLE)], 12)
m4_define([_m4_divert(HELP_WITH)], 13)
m4_define([_m4_divert(HELP_VAR)], 14)
m4_define([_m4_divert(HELP_VAR_END)], 15)
m4_define([_m4_divert(HELP_END)], 16)
m4_define([_m4_divert(VERSION_BEGIN)], 20)
m4_define([_m4_divert(VERSION_END)], 21)
m4_define([_m4_divert(INIT_PREPARE)], 30)
m4_define([_m4_divert(BODY)], 40)
m4_define([_m4_divert(PREPARE)], 100)
# AC_DIVERT_ONCE(DIVERSION-NAME, CONTENT)
# ---------------------------------------
# Output once CONTENT into DIVERSION-NAME (which may be a number
# actually). An end of line is appended for free to CONTENT.
m4_define([AC_DIVERT_ONCE],
[AC_EXPAND_ONCE([m4_divert([$1], [$2])])])
# AC_DIVERT_PUSH(DIVERSION-NAME)
# ------------------------------
m4_define([AC_DIVERT_PUSH],
[m4_divert_push($@)])
# AC_DIVERT_POP
# -------------
m4_define([AC_DIVERT_POP],
[m4_divert_pop($@)])
# Initialize the diversion setup.
m4_define([_m4_divert_diversion], _m4_divert([BODY]))
# Throw away output until AC_INIT is called.
m4_pushdef([_m4_divert_diversion], _m4_divert([KILL]))
## ------------------------------- ##
## Defining macros in autoconf::. ##
## ------------------------------- ##
# AC_DEFUN(NAME, EXPANSION)
# -------------------------
# Same as `m4_define' but equip the macro with the needed machinery
# for `AC_REQUIRE'.
#
# We don't use this macro to define some frequently called macros that
# are not involved in ordering constraints, to save m4 processing.
m4_define([AC_DEFUN],
[m4_defun([$1], [$2[]AC_PROVIDE([$1])])])
# AC_DEFUN_ONCE(NAME, EXPANSION)
# ------------------------------
# As AC_DEFUN, but issues the EXPANSION only once, and warns if used
# several times.
m4_define([AC_DEFUN_ONCE],
[m4_defun_once([$1], [$2[]AC_PROVIDE([$1])])])
# AC_OBSOLETE(THIS-MACRO-NAME, [SUGGESTION])
# ------------------------------------------
m4_define([AC_OBSOLETE],
[AC_DIAGNOSE([obsolete], [$1 is obsolete$2])])
## ----------------------------- ##
## Dependencies between macros. ##
## ----------------------------- ##
# AC_BEFORE(THIS-MACRO-NAME, CALLED-MACRO-NAME)
# ---------------------------------------------
m4_define([AC_BEFORE],
[AC_PROVIDE_IFELSE([$2], [AC_DIAGNOSE([syntax], [$2 was called before $1])])])
# AC_REQUIRE(STRING)
# ------------------
# If STRING has never been AC_PROVIDE'd, then expand it. A macro must
# be AC_DEFUN'd if either it is AC_REQUIRE'd, or it AC_REQUIRE's.
m4_define([AC_REQUIRE],
[m4_require([$1])])
# AC_EXPAND_ONCE(TEXT)
# --------------------
# If TEXT has never been expanded, expand it *here*.
m4_define([AC_EXPAND_ONCE],
[m4_expand_once([$1],
[],
[AC_PROVIDE([$1])[]$1])])
# AC_PROVIDE(MACRO-NAME)
# ----------------------
# Ideally we should just use `m4_provide($1)', but unfortunately many
# third party macros know that we use `AC_PROVIDE_$1' and they depend
# on it.
m4_define([AC_PROVIDE],
[m4_define([AC_PROVIDE_$1])m4_provide([$1])])
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
# -----------------------------------------------------------
# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
# The purpose of this macro is to provide the user with a means to
# check macros which are provided without letting her know how the
# information is coded.
m4_define([AC_PROVIDE_IFELSE],
[ifdef([AC_PROVIDE_$1],
[$2], [$3])])
## --------------------------------- ##
## Defining macros in autoupdate::. ##
## --------------------------------- ##
# AU_DEFINE(NAME, GLUE-CODE, [MESSAGE])
# -------------------------------------
#
# Declare `autoupdate::NAME' to be `GLUE-CODE', with all the needed
# wrapping actions required by `autoupdate'.
# We do not define anything in `autoconf::'.
m4_define([AU_DEFINE],
[AC_DEFUN([$1], [$2])])
# AU_DEFUN(NAME, NEW-CODE, [MESSAGE])
# -----------------------------------
# Declare that the macro NAME is now obsoleted, and should be replaced
# by NEW-CODE. Tell the user she should run autoupdate, and include
# the additional MESSAGE.
#
# Also define NAME as a macro which code is NEW-CODE.
#
# This allows to share the same code for both supporting obsoleted macros,
# and to update a configure.in.
# See `acobsolete.m4' for a longer description.
m4_define([AU_DEFUN],
[AU_DEFINE([$1],
[AC_DIAGNOSE([obsolete], [The macro `$1' is obsolete.
You should run autoupdate.])dnl
$2],
[$3])dnl
])
# AU_ALIAS(OLD-NAME, NEW-NAME)
# ----------------------------
# The OLD-NAME is no longer used, just use NEW-NAME instead. There is
# little difference with using AU_DEFUN but the fact there is little
# interest in running the test suite on both OLD-NAME and NEW-NAME.
# This macro makes it possible to distinguish such cases.
#
# Do not use `defn' since then autoupdate would replace an old macro
# call with the new macro body instead of the new macro call.
m4_define([AU_ALIAS],
[AU_DEFUN([$1], [$2($][@)])])
## ------------------------- ##
## Interface to autoheader. ##
## ------------------------- ##
# AH_OUTPUT(KEY, TEXT)
# --------------------
# Pass TEXT to autoheader.
# This macro is `read' only via `autoconf --trace', it outputs nothing.
m4_define([AH_OUTPUT], [])
# AH_VERBATIM(KEY, TEMPLATE)
# --------------------------
# If KEY is direct (i.e., no indirection such as in KEY=$my_func which
# may occur if there is AC_CHECK_FUNCS($my_func)), issue an autoheader
# TEMPLATE associated to the KEY. Otherwise, do nothing. TEMPLATE is
# output as is, with no formating.
m4_define([AH_VERBATIM],
[AC_VAR_INDIR_IFELSE([$1],,
[AH_OUTPUT([$1], _AS_QUOTE([[$2]]))])
])
# AH_TEMPLATE(KEY, DESCRIPTION)
# -----------------------------
# Issue an autoheader template for KEY, i.e., a comment composed of
# DESCRIPTION (properly wrapped), and then #undef KEY.
m4_define([AH_TEMPLATE],
[AH_VERBATIM([$1],
m4_text_wrap([$2 */], [ ], [/* ])[
#undef $1])])
# AH_TOP(TEXT)
# ------------
# Output TEXT at the top of `config.h.in'.
m4_define([AH_TOP],
[m4_define([_AH_COUNTER], m4_incr(_AH_COUNTER))dnl
AH_VERBATIM([0000]_AH_COUNTER, [$1])])
# AH_BOTTOM(TEXT)
# ---------------
# Output TEXT at the bottom of `config.h.in'.
m4_define([AH_BOTTOM],
[m4_define([_AH_COUNTER], m4_incr(_AH_COUNTER))dnl
AH_VERBATIM([zzzz]_AH_COUNTER, [$1])])
# Initialize.
m4_define([_AH_COUNTER], [0])
## --------------------------------------------------- ##
## Common m4/sh handling of variables (indirections). ##
## --------------------------------------------------- ##
# The purpose of this section is to provide a uniform API for
# reading/setting sh variables with or without indirection.
# Typically, one can write
# AC_VAR_SET(var, val)
# or
# AC_VAR_SET(ac_$var, val)
# and expect the right thing to happen.
# AC_VAR_INDIR_IFELSE(EXPRESSION, IF-INDIR, IF-NOT-INDIR)
# -------------------------------------------------------
# If EXPRESSION has shell indirections ($var or `expr`), expand
# IF-INDIR, else IF-NOT-INDIR.
m4_define([AC_VAR_INDIR_IFELSE],
[ifelse(m4_regexp([$1], [[`$]]),
-1, [$3],
[$2])])
# AC_VAR_SET(VARIABLE, VALUE)
# ---------------------------
# Set the VALUE of the shell VARIABLE.
# If the variable contains indirections (e.g. `ac_cv_func_$ac_func')
# perform whenever possible at m4 level, otherwise sh level.
m4_define([AC_VAR_SET],
[AC_VAR_INDIR_IFELSE([$1],
[eval "$1=$2"],
[$1=$2])])
# AC_VAR_GET(VARIABLE)
# --------------------
# Get the value of the shell VARIABLE.
# Evaluates to $VARIABLE if there are no indirection in VARIABLE,
# else into the appropriate `eval' sequence.
m4_define([AC_VAR_GET],
[AC_VAR_INDIR_IFELSE([$1],
[`eval echo '${'m4_patsubst($1, [[\\`]], [\\\&])'}'`],
[$[]$1])])
# AC_VAR_TEST_SET(VARIABLE)
# -------------------------
# Expands into the `test' expression which is true if VARIABLE
# is set. Polymorphic. Should be dnl'ed.
m4_define([AC_VAR_TEST_SET],
[AC_VAR_INDIR_IFELSE([$1],
[eval "test \"\${$1+set}\" = set"],
[test "${$1+set}" = set])])
# AC_VAR_SET_IFELSE(VARIABLE, IF-TRUE, IF-FALSE)
# ----------------------------------------------
# Implement a shell `if-then-else' depending whether VARIABLE is set
# or not. Polymorphic.
m4_define([AC_VAR_SET_IFELSE],
[AS_IFELSE([AC_VAR_TEST_SET([$1])], [$2], [$3])])
# AC_VAR_PUSHDEF and AC_VAR_POPDEF
# --------------------------------
#
# Sometimes we may have to handle literals (e.g. `stdlib.h'), while at
# other moments, the same code may have to get the value from a
# variable (e.g., `ac_header'). To have a uniform handling of both
# cases, when a new value is about to be processed, declare a local
# variable, e.g.:
#
# AC_VAR_PUSHDEF([header], [ac_cv_header_$1])
#
# and then in the body of the macro, use `header' as is. It is of
# first importance to use `AC_VAR_*' to access this variable. Don't
# quote its name: it must be used right away by m4.
#
# If the value `$1' was a literal (e.g. `stdlib.h'), then `header' is
# in fact the value `ac_cv_header_stdlib_h'. If `$1' was indirect,
# then `header's value in m4 is in fact `$ac_header', the shell
# variable that holds all of the magic to get the expansion right.
#
# At the end of the block, free the variable with
#
# AC_VAR_POPDEF([header])
# AC_VAR_PUSHDEF(VARNAME, VALUE)
# ------------------------------
# Define the m4 macro VARNAME to an accessor to the shell variable
# named VALUE. VALUE does not need to be a valid shell variable name:
# the transliteration is handled here. To be dnl'ed.
m4_define([AC_VAR_PUSHDEF],
[AC_VAR_INDIR_IFELSE([$2],
[ac_$1=AC_TR_SH($2)
m4_pushdef([$1], [$ac_[$1]])],
[m4_pushdef([$1], [AC_TR_SH($2)])])])
# AC_VAR_POPDEF(VARNAME)
# ----------------------
# Free the shell variable accessor VARNAME. To be dnl'ed.
m4_define([AC_VAR_POPDEF],
[m4_popdef([$1])])
## ------------------------------------ ##
## Common m4/sh character translation. ##
## ------------------------------------ ##
# The point of this section is to provide high level functions
# comparable to m4's `translit' primitive, but m4:sh polymorphic.
# Transliteration of literal strings should be handled by m4, while
# shell variables' content will be translated at runtime (tr or sed).
# AC_TR_CPP(EXPRESSION)
# ---------------------
# Map EXPRESSION to an upper case string which is valid as rhs for a
# `#define'. sh/m4 polymorphic. Make sure to update the definition
# of `$ac_tr_cpp' if you change this.
m4_define([AC_TR_CPP],
[AC_VAR_INDIR_IFELSE([$1],
[`echo "$1" | $ac_tr_cpp`],
[m4_patsubst(m4_translit([[$1]],
[*abcdefghijklmnopqrstuvwxyz],
[PABCDEFGHIJKLMNOPQRSTUVWXYZ]),
[[^A-Z0-9_]], [_])])])
# AC_TR_SH(EXPRESSION)
# --------------------
# Transform EXPRESSION into a valid shell variable name.
# sh/m4 polymorphic.
# Make sure to update the definition of `$ac_tr_sh' if you change this.
m4_define([AC_TR_SH],
[AC_VAR_INDIR_IFELSE([$1],
[`echo "$1" | $ac_tr_sh`],
[m4_patsubst(m4_translit([[$1]], [*+], [pp]),
[[^a-zA-Z0-9_]], [_])])])
## ----------------------------- ##
## Implementing Autoconf loops. ##
## ----------------------------- ##
# AC_FOREACH(VARIABLE, LIST, EXPRESSION)
# --------------------------------------
#
# Compute EXPRESSION assigning to VARIABLE each value of the LIST.
# LIST is a /bin/sh list, i.e., it has the form ` item_1 item_2
# ... item_n ': white spaces are separators, and leading and trailing
# spaces are meaningless.
#
# This macro is robust to active symbols:
# AC_FOREACH([Var], [ active
# b act\
# ive ], [-Var-])end
# => -active--b--active-end
m4_define([AC_FOREACH],
[m4_foreach([$1], m4_split(m4_strip(m4_join([$2]))), [$3])])
## ----------------------------------- ##
## Helping macros to display strings. ##
## ----------------------------------- ##
# AC_HELP_STRING(LHS, RHS, [COLUMN])
# ----------------------------------
#
# Format an Autoconf macro's help string so that it looks pretty when
# the user executes "configure --help". This macro takes three
# arguments, a "left hand side" (LHS), a "right hand side" (RHS), and
# the COLUMN which is a string of white spaces which leads to the
# the RHS column (default: 26 white spaces).
#
# The resulting string is suitable for use in other macros that require
# a help string (e.g. AC_ARG_WITH).
#
# Here is the sample string from the Autoconf manual (Node: External
# Software) which shows the proper spacing for help strings.
#
# --with-readline support fancy command line editing
# ^ ^ ^
# | | |
# | column 2 column 26
# |
# column 0
#
# A help string is made up of a "left hand side" (LHS) and a "right
# hand side" (RHS). In the example above, the LHS is
# "--with-readline", while the RHS is "support fancy command line
# editing".
#
# If the LHS extends past column 24, then the LHS is terminated with a
# newline so that the RHS is on a line of its own beginning in column
# 26.
#
# Therefore, if the LHS were instead "--with-readline-blah-blah-blah",
# then the AC_HELP_STRING macro would expand into:
#
#
# --with-readline-blah-blah-blah
# ^ ^ support fancy command line editing
# | | ^
# | column 2 |
# column 0 column 26
#
m4_define([AC_HELP_STRING],
[m4_pushdef([AC_Prefix], m4_default([$3], [ ]))dnl
m4_pushdef([AC_Prefix_Format],
[ %-]m4_eval(m4_len(AC_Prefix) - 3)[s ])dnl [ %-23s ]
m4_text_wrap([$2], AC_Prefix, m4_format(AC_Prefix_Format, [$1]))dnl
m4_popdef([AC_Prefix_Format])dnl
m4_popdef([AC_Prefix])dnl
])
## ---------------------------------------------- ##
## Information on the package being Autoconf'ed. ##
## ---------------------------------------------- ##
# It is suggested that the macros in this section appear before
# AC_INIT in `configure.in'. Nevertheless, this is just stylistic,
# and from the implementation point of, AC_INIT *must* be expanded
# beforehand: it puts data in diversions which must appear before the
# data provided by the macros of this section.
# The solution is to require AC_INIT in each of these macros. AC_INIT
# has the needed magic so that it can't be expanded twice.
# _AC_INIT_PACKAGE(PACKAGE, VERSION, [BUG-REPORT])
# ------------------------------------------------
m4_define([_AC_INIT_PACKAGE],
[m4_define([AC_PACKAGE_NAME], [$1])dnl
m4_define([AC_PACKAGE_VERSION], [$2])dnl
m4_define([AC_PACKAGE_STRING], [$1 $2])dnl
m4_define([AC_PACKAGE_BUGREPORT], [$3])dnl
])
# AC_COPYRIGHT(TEXT)
# ------------------
# Append Copyright information in the top of `configure'. TEXT is
# evaluated once, hence TEXT can use macros. Note that we do not
# prepend `# ' but `@%:@ ', since m4 does not evaluate the comments.
# Had we used `# ', the Copyright sent in the beginning of `configure'
# would have not been evaluated. Another solution, a bit fragile,
# would have be to use m4_quote to force an evaluation:
#
# m4_patsubst(m4_quote($1), [^], [# ])
m4_define([AC_COPYRIGHT],
[m4_divert([NOTICE],
[m4_patsubst([
$1], [^], [@%:@ ])])dnl
m4_divert([VERSION_BEGIN],
[
$1])dnl
])# AC_COPYRIGHT
# AC_REVISION(REVISION-INFO)
# --------------------------
# The second quote in the translit is just to cope with font-lock-mode
# which sees the opening of a string.
m4_define([AC_REVISION],
[m4_divert([REVISION],
[@%:@ From __file__ m4_translit([$1], [$""]).])dnl
])
## ---------------------------------------- ##
## Requirements over the Autoconf version. ##
## ---------------------------------------- ##
# AU::AC_PREREQ(VERSION)
# ----------------------
# Update this `AC_PREREQ' statement to require the current version of
# Autoconf. But fail if ever this autoupdate is too old.
#
# Note that `m4_defn([AC_ACVERSION])' below are expanded before calling
# `AU_DEFUN', i.e., it is hard coded. Otherwise it would be quite
# complex for autoupdate to import the value of `AC_ACVERSION'. We
# could `AU_DEFUN' `AC_ACVERSION', but this would replace all its
# occurrences with the current version of Autoconf, which is certainly
# not what mean the user.
AU_DEFUN([AC_PREREQ],
[ifelse(m4_version_compare(]m4_defn([AC_ACVERSION])[, [$1]), -1,
[m4_fatal([Autoconf version $1 or higher is required for this script])])dnl
[AC_PREREQ(]]m4_defn([AC_ACVERSION])[[)]])
# AC_PREREQ(VERSION)
# ------------------
# Complain and exit if the Autoconf version is less than VERSION.
m4_define([AC_PREREQ],
[ifelse(m4_version_compare(m4_defn([AC_ACVERSION]), [$1]), -1,
[AC_FATAL([Autoconf version $1 or higher is required for this script])])])
## ---------------- ##
## Initialization. ##
## ---------------- ##
# All the following macros are used by AC_INIT. Ideally, they should
# be presented in the order in which they are output. Please, help us
# sorting it, or at least, don't augment the entropy.
# _AC_INIT_NOTICE
# ---------------
m4_define([_AC_INIT_NOTICE],
[m4_divert([NOTICE],
[@%:@ Guess values for system-dependent variables and create Makefiles.
@%:@ Generated by Autoconf AC_ACVERSION[]dnl
ifset([AC_PACKAGE_STRING], [ for AC_PACKAGE_STRING]).])
ifset([AC_PACKAGE_BUGREPORT],
[m4_divert([NOTICE],
[@%:@
@%:@ Report bugs to <AC_PACKAGE_BUGREPORT>.])])
])
# _AC_INIT_COPYRIGHT
# ------------------
m4_define([_AC_INIT_COPYRIGHT],
[AC_COPYRIGHT(
[Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000
Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.])dnl
])
# _AC_INIT_DEFAULTS_FDS
# ---------------------
# Set up the file descriptors used by `configure'.
m4_define([AS_MESSAGE_FD], 6)
m4_define([AS_MESSAGE_LOG_FD], 5)
# That's how trey used to be named.
AU_ALIAS([AC_FD_CC], [AS_MESSAGE_LOG_FD])
AU_ALIAS([AC_FD_MSG], [AS_MESSAGE_FD])
m4_define([_AC_INIT_DEFAULTS_FDS],
[# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
@%:@ AS_MESSAGE_FD checking for... messages and results
@%:@ AS_MESSAGE_LOG_FD compiler messages saved in config.log
if test "$silent" = yes; then
exec AS_MESSAGE_FD>/dev/null
else
exec AS_MESSAGE_FD>&1
fi
exec AS_MESSAGE_LOG_FD>>config.log
])# _AC_INIT_DEFAULTS_FDS
# _AC_INIT_DEFAULTS
# -----------------
# Values which defaults can be set from `configure.in'.
m4_define([_AC_INIT_DEFAULTS],
[m4_divert_push([DEFAULTS])dnl
AS_SHELL_SANITIZE
cat >config.log << EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me ifset([AC_PACKAGE_STRING],
[(AC_PACKAGE_STRING) ])AC_ACVERSION, executed with
> $[0] $[@]
on `(hostname || uname -n) 2>/dev/null | sed 1q`:
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
hostinfo = `(hostinfo) 2>/dev/null`
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
EOF
_AC_INIT_DEFAULTS_FDS
#
# Initializations.
#
ac_default_prefix=/usr/local
cross_compiling=no
subdirs=
MFLAGS= MAKEFLAGS=
AC_SUBST(SHELL, ${CONFIG_SHELL-/bin/sh})dnl
# Maximum number of lines to put in a shell here document.
# This variable seems obsolete. It should probably be removed, and
# only ac_max_sed_lines should be used.
: ${ac_max_here_lines=38}
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
# Name of the executable.
as_me=`echo "$[0]" | sed 's,.*/,,'`
# Avoid depending upon Character Ranges.
ac_cr_az='abcdefghijklmnopqrstuvwxyz'
ac_cr_AZ='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
ac_cr_09='0123456789'
ac_cr_alnum=$ac_cr_az$ac_cr_AZ$ac_cr_09
# Sed expression to map a string onto a valid sh and CPP variable names.
ac_tr_sh="sed y%*+%pp%;s%[[^_$ac_cr_alnum]]%_%g"
ac_tr_cpp="sed y%*$ac_cr_az%P$ac_cr_AZ%;s%[[^_$ac_cr_alnum]]%_%g"
# By default always use an empty string as the executable extension.
# Only change it if the script calls AC_EXEEXT.
ac_exeext=
# By default assume that objects files use an extension of .o. Only
# change it if the script calls AC_OBJEXT.
ac_objext=o
# Factoring default headers for most tests.
dnl If ever you change this variable, please keep autoconf.texi in sync.
ac_includes_default="\
#include <stdio.h>
#include <sys/types.h>
#if STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# if HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#if HAVE_STRING_H
# if !STDC_HEADERS && HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#else
# if HAVE_STRINGS_H
# include <strings.h>
# endif
#endif
#if HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#if HAVE_UNISTD_H
# include <unistd.h>
#endif"
m4_divert_pop()dnl
])# _AC_INIT_DEFAULTS
# AC_PREFIX_DEFAULT(PREFIX)
# -------------------------
AC_DEFUN([AC_PREFIX_DEFAULT],
[m4_divert([DEFAULTS], [ac_default_prefix=$1])])
# AC_CONFIG_SRCDIR([UNIQUE-FILE-IN-SOURCE-DIR])
# ---------------------------------------------
# UNIQUE-FILE-IN-SOURCE-DIR is a filename unique to this package,
# relative to the directory that configure is in, which we can look
# for to find out if srcdir is correct.
AC_DEFUN([AC_CONFIG_SRCDIR],
[m4_divert([DEFAULTS], [ac_unique_file="$1"])])
# _AC_INIT_SRCDIR
# ---------------
# Compute `srcdir' based on `$ac_unique_file'.
m4_define([_AC_INIT_SRCDIR],
[m4_divert_push([PARSE_ARGS])dnl
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$[0]
ac_confdir=`echo "$ac_prog" | sed 's%/[[^/][^/]]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
AC_MSG_ERROR([cannot find sources in $ac_confdir or ..])
else
AC_MSG_ERROR([cannot find sources in $srcdir])
fi
fi
dnl Double slashes in pathnames in object file debugging info
dnl mess up M-x gdb in Emacs.
srcdir=`echo "$srcdir" | sed 's%\([[^/]]\)/*$%\1%'`
m4_divert_pop()dnl
])# _AC_INIT_SRCDIR
# _AC_INIT_PARSE_ARGS
# -------------------
m4_define([_AC_INIT_PARSE_ARGS],
[m4_divert_push([PARSE_ARGS])dnl
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
AC_SUBST(exec_prefix, NONE)dnl
no_create=
no_recursion=
AC_SUBST(prefix, NONE)dnl
program_prefix=NONE
program_suffix=NONE
AC_SUBST(program_transform_name, [s,x,x,])dnl
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
dnl Installation directory options.
dnl These are left unexpanded so users can "make install exec_prefix=/foo"
dnl and all the variables that are supposed to be based on exec_prefix
dnl by default will actually change.
dnl Use braces instead of parens because sh, perl, etc. also accept them.
AC_SUBST(bindir, '${exec_prefix}/bin')dnl
AC_SUBST(sbindir, '${exec_prefix}/sbin')dnl
AC_SUBST(libexecdir, '${exec_prefix}/libexec')dnl
AC_SUBST(datadir, '${prefix}/share')dnl
AC_SUBST(sysconfdir, '${prefix}/etc')dnl
AC_SUBST(sharedstatedir, '${prefix}/com')dnl
AC_SUBST(localstatedir, '${prefix}/var')dnl
AC_SUBST(libdir, '${exec_prefix}/lib')dnl
AC_SUBST(includedir, '${prefix}/include')dnl
AC_SUBST(oldincludedir, '/usr/include')dnl
AC_SUBST(infodir, '${prefix}/info')dnl
AC_SUBST(mandir, '${prefix}/man')dnl
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
ac_optarg=`expr "x$ac_option" : 'x[[^=]]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir=$ac_optarg ;;
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : "[.*[^-_$ac_cr_alnum]]" >/dev/null &&
AC_MSG_ERROR([invalid feature name: $ac_feature])
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
eval "enable_$ac_feature=no" ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([[^=]]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : "[.*[^-_$ac_cr_alnum]]" >/dev/null &&
AC_MSG_ERROR([invalid feature name: $ac_feature])
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
case $ac_option in
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([[^=]]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : "[.*[^-_$ac_cr_alnum]]" >/dev/null &&
AC_MSG_ERROR([invalid package name: $ac_package])
ac_package=`echo $ac_package| sed 's/-/_/g'`
case $ac_option in
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : "[.*[^-_$ac_cr_alnum]]" >/dev/null &&
AC_MSG_ERROR([invalid package name: $ac_package])
ac_package=`echo $ac_package | sed 's/-/_/g'`
eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) AC_MSG_ERROR([unrecognized option: $ac_option
Try `$[0] --help' for more information.])
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([[^=]]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : "[.*[^_$ac_cr_alnum]]" >/dev/null &&
AC_MSG_ERROR([invalid variable name: $ac_envvar])
ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
eval "$ac_envvar='$ac_optarg'"
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
AC_MSG_WARN([you should use --build, --host, --target])
expr "x$ac_option" : "[.*[^-._$ac_cr_alnum]]" >/dev/null &&
AC_MSG_WARN([invalid host type: $ac_option])
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
AC_MSG_ERROR([missing argument to $ac_option])
fi
# Be sure to have absolute paths.
for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
localstatedir libdir includedir oldincludedir infodir mandir \
exec_prefix prefix
do
eval ac_val=$`echo $ac_var`
case $ac_val in
[[\\/$]]* | ?:[[\\/]]* ) ;;
NONE ) ;;
*) AC_MSG_ERROR([expected an absolute path for --$ac_var: $ac_val]);;
esac
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: should be removed in autoconf 3.0.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
AC_MSG_WARN([If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.])
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
m4_divert_pop()dnl
])# _AC_INIT_PARSE_ARGS
# _AC_INIT_HELP
# -------------
# Handle the `configure --help' message.
m4_define([_AC_INIT_HELP],
[m4_divert_push([HELP_BEGIN])dnl
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<EOF
\`configure' configures ifset([AC_PACKAGE_STRING],
[AC_PACKAGE_STRING],
[this package]) to adapt to many kinds of systems.
Usage: $[0] [[OPTION]]... [[VAR=VALUE]]...
[To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
EOF
cat <<EOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]
EOF
cat <<\EOF]
m4_divert_pop()dnl
dnl The order of the diversions here is
dnl - HELP_BEGIN
dnl which may be prolongated by extra generic options such as with X or
dnl AC_ARG_PROGRAM. Displayed only in long --help.
dnl
dnl - HELP_CANON
dnl Support for cross compilation (--build, --host and --target).
dnl Display only in long --help.
dnl
dnl - HELP_ENABLE
dnl which starts with the trailer of the HELP_BEGIN, HELP_CANON section,
dnl then implements the header of the non generic options.
dnl
dnl - HELP_WITH
dnl
dnl - HELP_VAR
dnl
dnl - HELP_VAR_END
dnl
dnl - HELP_END
dnl initialized below, in which we dump the trailer (handling of the
dnl recursion for instance).
m4_divert_push([HELP_ENABLE])dnl
EOF
fi
if test -n "$ac_init_help"; then
ifset([AC_PACKAGE_STRING],
[ case $ac_init_help in
short | recursive ) echo "Configuration of AC_PACKAGE_STRING:";;
esac])
cat <<\EOF
m4_divert_pop()dnl
m4_divert_push([HELP_END])dnl
ifset([AC_PACKAGE_BUGREPORT], [
Report bugs to <AC_PACKAGE_BUGREPORT>.])
EOF
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
ac_popdir=`pwd`
for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
cd $ac_subdir
# A "../" for each directory in /$ac_subdir.
ac_dots=`echo $ac_subdir |
sed 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g'`
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
[[\\/]]* | ?:[[\\/]]* ) # Absolute path.
ac_sub_srcdir=$srcdir/$ac_subdir ;;
*) # Relative path.
ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
esac
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_sub_srcdir/configure.gnu; then
echo
$SHELL $ac_sub_srcdir/configure.gnu --help=recursive
elif test -f $ac_sub_srcdir/configure; then
echo
$SHELL $ac_sub_srcdir/configure --help=recursive
elif test -f $ac_sub_srcdir/configure.in; then
echo
$ac_configure --help
else
AC_MSG_WARN([no configuration information is in $ac_subdir])
fi
cd $ac_popdir
done
fi
test -n "$ac_init_help" && exit 0
m4_divert_pop()dnl
])# _AC_INIT_HELP
# _AC_INIT_VERSION
# ----------------
# Handle the `configure --version' message.
m4_define([_AC_INIT_VERSION],
[m4_divert([VERSION_BEGIN],
[if $ac_init_version; then
cat <<\EOF])dnl
ifset([AC_PACKAGE_STRING],
[m4_divert([VERSION_BEGIN],
[configure (AC_PACKAGE_STRING) AC_ACVERSION])])
m4_divert([VERSION_END],
[EOF
exit 0
fi])dnl
])# _AC_INIT_VERSION
# _AC_INIT_PREPARE
# ----------------
# Called by AC_INIT to build the preamble of the `configure' scripts.
# 1. Trap and clean up various tmp files.
# 2. Set up the fd and output files
# 3. Remember the options given to `configure' for `config.status --recheck'.
# 4. Ensure a correct environment
# 5. Required macros (cache, default AC_SUBST etc.)
m4_define([_AC_INIT_PREPARE],
[m4_divert_push([INIT_PREPARE])dnl
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell meta-characters.
ac_configure_args=
ac_sep=
for ac_arg
do
case $ac_arg in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
dnl If you change this globbing pattern, test it on an old shell --
dnl it's sensitive. Putting any kind of quote in it causes syntax errors.
[ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)]
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
ac_sep=" " ;;
*) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
ac_sep=" " ;;
esac
# Get rid of the leading space.
done
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.
trap 'exit_status=$?
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal" >&AS_MESSAGE_LOG_FD
echo "$as_me: exit $exit_status" >&AS_MESSAGE_LOG_FD
rm -rf conftest* confdefs* core core.* *.core $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_status=$?; ac_signal='$ac_signal'; exit $ac_status' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h
# Let the site file select an alternate cache file if it wants to.
AC_SITE_LOAD
AC_CACHE_LOAD
_AC_ARG_VAR_VALIDATE
_AC_ARG_VAR_PRECIOUS(build_alias)dnl
_AC_ARG_VAR_PRECIOUS(host_alias)dnl
_AC_ARG_VAR_PRECIOUS(target_alias)dnl
AC_LANG(C)
_AC_PROG_ECHO()dnl
dnl Substitute for predefined variables.
AC_SUBST(CFLAGS)dnl
AC_SUBST(CPPFLAGS)dnl
AC_SUBST(CXXFLAGS)dnl
AC_SUBST(FFLAGS)dnl
AC_SUBST(DEFS)dnl
AC_SUBST(LDFLAGS)dnl
AC_SUBST(LIBS)dnl
m4_divert_pop()dnl
])# _AC_INIT_PREPARE
# AU::AC_INIT([UNIQUE-FILE-IN-SOURCE-DIR])
# ----------------------------------------
# This macro is used only for Autoupdate.
AU_DEFUN([AC_INIT],
[ifval([$2], [[AC_INIT($@)]],
[ifval([$1],
[[AC_INIT]
AC_CONFIG_SRCDIR([$1])], [[AC_INIT]])])[]dnl
])
# AC_INIT([PACKAGE, VERSION, [BUG-REPORT])
# ----------------------------------------
# Include the user macro files, prepare the diversions, and output the
# preamble of the `configure' script.
# Note that the order is important: first initialize, then set the
# AC_CONFIG_SRCDIR.
m4_define([AC_INIT],
[ifval([$2], [_AC_INIT_PACKAGE($@)])dnl
m4_divert([BINSH], [@%:@! /bin/sh])
_AC_INIT_DEFAULTS()dnl
m4_divert_pop()dnl to BODY
_AC_INIT_PARSE_ARGS
_AC_INIT_SRCDIR
_AC_INIT_HELP
_AC_INIT_VERSION
_AC_INIT_PREPARE
dnl _AC_INIT_COPYRIGHT must be called after _AC_INIT_VERSION, since
dnl it dumps into a diversion prepared by _AC_INIT_VERSION.
_AC_INIT_NOTICE
_AC_INIT_COPYRIGHT
ifval([$2], , [ifval([$1], [AC_CONFIG_SRCDIR([$1])])])dnl
])
# AC_PLAIN_SCRIPT
# ---------------
# Simulate AC_INIT, i.e., pretend this is the beginning of the `configure'
# generation. This is used by some tests, and let `autoconf' be used to
# generate other scripts than `configure'.
m4_define([AC_PLAIN_SCRIPT],
[m4_divert_pop()])
## ----------------------------- ##
## Selecting optional features. ##
## ----------------------------- ##
# AC_ARG_ENABLE(FEATURE, HELP-STRING, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# ------------------------------------------------------------------------
AC_DEFUN([AC_ARG_ENABLE],
[AC_DIVERT_ONCE([HELP_ENABLE], [[
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]]])dnl
AC_DIVERT_ONCE([HELP_ENABLE], [$2])dnl
# Check whether --enable-$1 or --disable-$1 was given.
if test "[${enable_]m4_patsubst([$1], -, _)+set}" = set; then
enableval="[$enable_]m4_patsubst([$1], -, _)"
$3
m4_ifvanl([$4], [else
$4])dnl
fi; dnl
])# AC_ARG_ENABLE
AU_DEFUN([AC_ENABLE],
[AC_ARG_ENABLE([$1], [ --enable-$1], [$2], [$3])])
## ------------------------------ ##
## Working with optional software ##
## ------------------------------ ##
# AC_ARG_WITH(PACKAGE, HELP-STRING, ACTION-IF-TRUE, [ACTION-IF-FALSE])
# --------------------------------------------------------------------
AC_DEFUN([AC_ARG_WITH],
[AC_DIVERT_ONCE([HELP_WITH], [[
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)]])
AC_DIVERT_ONCE([HELP_WITH], [$2])dnl
# Check whether --with-$1 or --without-$1 was given.
if test "[${with_]m4_patsubst([$1], -, _)+set}" = set; then
withval="[$with_]m4_patsubst([$1], -, _)"
$3
m4_ifvanl([$4], [else
$4])dnl
fi; dnl
])# AC_ARG_WITH
AU_DEFUN([AC_WITH],
[AC_ARG_WITH([$1], [ --with-$1], [$2], [$3])])
## ----------------------------------------- ##
## Remembering variables for reconfiguring. ##
## ----------------------------------------- ##
# _AC_ARG_VAR_PRECIOUS(VARNAME)
# -----------------------------
# Declare VARNAME is precious.
#
# We try to diagnose when precious variables have changed. To do this,
# make two early snapshots (after the option processing to take
# explicit variables into account) of those variables: one (ac_env_)
# which represents the current run, and a second (ac_cv_env_) which,
# at the first run, will be saved in the cache. As an exception to
# the cache mechanism, its loading will override these variables (non
# `ac_cv_env_' cache value are only set when unset).
#
# In subsequent runs, after having loaded the cache, compare
# ac_cv_env_foo against ac_env_foo. See _AC_ARG_VAR_VALIDATE.
m4_define([_AC_ARG_VAR_PRECIOUS],
[AC_DIVERT_ONCE([PARSE_ARGS],
[ac_env_$1_set=${$1+set}
ac_env_$1_value=$$1
ac_cv_env_$1_set=${$1+set}
ac_cv_env_$1_value=$$1])dnl
])
# _AC_ARG_VAR_VALIDATE
# --------------------
m4_define([_AC_ARG_VAR_VALIDATE],
[# Check that the precious variables saved in the cache have kept the same
# value.
ac_suggest_removing_cache=false
for ac_var in `(set) 2>&1 |
sed -n 's/^ac_env_\([[a-zA-Z_0-9]]*\)_set=.*/\1/p'`; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val="\$ac_cv_env_${ac_var}_value"
eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
AC_MSG_WARN([`$ac_var' was set to `$ac_old_val' in the previous run])
ac_suggest_removing_cache=: ;;
,set)
AC_MSG_WARN([`$ac_var' was not set in the previous run])
ac_suggest_removing_cache=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
AC_MSG_WARN([`$ac_var' has changed since the previous run:])
AC_MSG_WARN([ former value: $ac_old_val])
AC_MSG_WARN([ current value: $ac_new_val])
ac_suggest_removing_cache=:
fi;;
esac
done
if $ac_suggest_removing_cache; then
AC_MSG_WARN([changes in the environment can compromise the build])
AC_MSG_WARN([consider removing $cache_file and starting over])
fi
])# _AC_ARG_VAR_VALIDATE
# AC_ARG_VAR(VARNAME, DOCUMENTATION)
# ----------------------------------
# Register VARNAME as a precious variable, and document it in
# `configure --help' (but only once).
AC_DEFUN([AC_ARG_VAR],
[AC_DIVERT_ONCE([HELP_VAR], [
Some influential environment variables:])dnl
AC_DIVERT_ONCE([HELP_VAR_END], [
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.])dnl
AC_DIVERT_ONCE([HELP_VAR], [AC_HELP_STRING([$1], [$2], [ ])])dnl
_AC_ARG_VAR_PRECIOUS([$1])dnl
])# AC_ARG_VAR
## ---------------------------- ##
## Transforming program names. ##
## ---------------------------- ##
# AC_ARG_PROGRAM
# --------------
# This macro is expanded only once, to avoid that `foo' ends up being
# installed as `ggfoo'.
AC_DEFUN_ONCE([AC_ARG_PROGRAM],
[dnl Document the options.
m4_divert_push([HELP_BEGIN])dnl
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
m4_divert_pop()dnl
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF >conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF
program_transform_name=`echo $program_transform_name | sed -f conftestsed`
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
# sed with no file args requires a program.
test -z "$program_transform_name" && program_transform_name="s,x,x,"
])# AC_ARG_PROGRAM
## ------------------------- ##
## Finding auxiliary files. ##
## ------------------------- ##
# AC_CONFIG_AUX_DIR(DIR)
# ----------------------
# Find install-sh, config.sub, config.guess, and Cygnus configure
# in directory DIR. These are auxiliary files used in configuration.
# DIR can be either absolute or relative to $srcdir.
AC_DEFUN([AC_CONFIG_AUX_DIR],
[AC_CONFIG_AUX_DIRS($1 $srcdir/$1)])
# AC_CONFIG_AUX_DIR_DEFAULT
# -------------------------
# The default is `$srcdir' or `$srcdir/..' or `$srcdir/../..'.
# There's no need to call this macro explicitly; just AC_REQUIRE it.
AC_DEFUN([AC_CONFIG_AUX_DIR_DEFAULT],
[AC_CONFIG_AUX_DIRS($srcdir $srcdir/.. $srcdir/../..)])
# AC_CONFIG_AUX_DIRS(DIR ...)
# ---------------------------
# Internal subroutine.
# Search for the configuration auxiliary files in directory list $1.
# We look only for install-sh, so users of AC_PROG_INSTALL
# do not automatically need to distribute the other auxiliary files.
AC_DEFUN([AC_CONFIG_AUX_DIRS],
[ac_aux_dir=
for ac_dir in $1; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f $ac_dir/shtool; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
AC_MSG_ERROR([cannot find install-sh or install.sh in $1])
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
AC_PROVIDE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
])# AC_CONFIG_AUX_DIRS
## ----------------------------------- ##
## Getting the canonical system type. ##
## ----------------------------------- ##
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD
#
# The rules are:
# 1. Build defaults to the current platform, as determined by config.guess.
# 2. Host defaults to build.
# 3. Target defaults to host.
# _AC_CANONICAL_SPLIT(THING)
# --------------------------
# Generate the variables THING, THING_{alias cpu vendor os}.
m4_define([_AC_CANONICAL_SPLIT],
[AC_SUBST([$1], [$ac_cv_$1])dnl
dnl FIXME: AC_SUBST([$1_alias], [$ac_cv_$1_alias])dnl
AC_SUBST([$1_cpu],
[`echo $ac_cv_$1 | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])dnl
AC_SUBST([$1_vendor],
[`echo $ac_cv_$1 | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])dnl
AC_SUBST([$1_os],
[`echo $ac_cv_$1 | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])dnl
])# _AC_CANONICAL_SPLIT
# AC_CANONICAL_BUILD
# ------------------
AC_DEFUN_ONCE([AC_CANONICAL_BUILD],
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
m4_divert([HELP_CANON],
[[
System types:
--build=BUILD configure for building on BUILD [guessed]]])dnl
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
AC_MSG_ERROR([cannot run $ac_config_sub])
AC_CACHE_CHECK([build system type], [ac_cv_build],
[ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
AC_MSG_ERROR([cannot guess build type; you must specify one])
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
AC_MSG_ERROR([$ac_config_sub $ac_cv_build_alias failed.])
])
_AC_CANONICAL_SPLIT(build)
])# AC_CANONICAL_BUILD
# AC_CANONICAL_HOST
# -----------------
AC_DEFUN_ONCE([AC_CANONICAL_HOST],
[AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_divert([HELP_CANON],
[[ --host=HOST build programs to run on HOST [BUILD]]])dnl
AC_CACHE_CHECK([host system type], [ac_cv_host],
[ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
AC_MSG_ERROR([$ac_config_sub $ac_cv_host_alias failed])
])
_AC_CANONICAL_SPLIT([host])
])# AC_CANONICAL_HOST
# AC_CANONICAL_TARGET
# -------------------
AC_DEFUN_ONCE([AC_CANONICAL_TARGET],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_BEFORE([$0], [AC_ARG_PROGRAM])dnl
m4_divert([HELP_CANON],
[[ --target=TARGET configure for building compilers for TARGET [HOST]]])dnl
AC_CACHE_CHECK([target system type], [ac_cv_target],
[dnl Set target_alias.
ac_cv_target_alias=$target_alias
test "x$ac_cv_target_alias" = "x" &&
ac_cv_target_alias=$ac_cv_host_alias
ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
AC_MSG_ERROR([$ac_config_sub $ac_cv_target_alias failed])
])
_AC_CANONICAL_SPLIT([target])
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-[]dnl
])# AC_CANONICAL_TARGET
AU_ALIAS([AC_CANONICAL_SYSTEM], [AC_CANONICAL_TARGET])
# AU::AC_VALIDATE_CACHED_SYSTEM_TUPLE([CMD])
# ------------------------------------------
# If the cache file is inconsistent with the current host,
# target and build system types, execute CMD or print a default
# error message. Now handled via _AC_ARG_VAR_PRECIOUS.
AU_DEFUN([AC_VALIDATE_CACHED_SYSTEM_TUPLE], [])
## ---------------------- ##
## Caching test results. ##
## ---------------------- ##
# AC_SITE_LOAD
# ------------
# Look for site or system specific initialization scripts.
m4_define([AC_SITE_LOAD],
[# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
])
# AC_CACHE_LOAD
# -------------
m4_define([AC_CACHE_LOAD],
[if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
AC_MSG_NOTICE([loading cache $cache_file])
case $cache_file in
[[\\/]]* | ?:[[\\/]]* ) . $cache_file;;
*) . ./$cache_file;;
esac
fi
else
AC_MSG_NOTICE([creating cache $cache_file])
>$cache_file
fi
])# AC_CACHE_LOAD
# _AC_CACHE_DUMP
# --------------
# Dump the cache to stdout. It can be in a pipe (this is a requirement).
m4_define([_AC_CACHE_DUMP],
[# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
["s/'/'\\\\''/g;
s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"]
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n \
["s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"]
;;
esac;
}dnl
])# _AC_CACHE_DUMP
# AC_CACHE_SAVE
# -------------
# Save the cache.
# Allow a site initialization script to override cache values.
m4_define([AC_CACHE_SAVE],
[cat >confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overriden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
EOF
_AC_CACHE_DUMP() |
sed '/^ac_cv_env/!s/^\([[^=]]*\)=\(.*\)$/\1=${\1=\2}/' >>confcache
if cmp -s $cache_file confcache; then :; else
if test -w $cache_file; then
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache[]dnl
])# AC_CACHE_SAVE
# AC_CACHE_VAL(CACHE-ID, COMMANDS-TO-SET-IT)
# ------------------------------------------
# The name of shell var CACHE-ID must contain `_cv_' in order to get saved.
# Should be dnl'ed. Try to catch common mistakes.
m4_define([AC_CACHE_VAL],
[ifelse(m4_regexp([$2], [AC_DEFINE]), [-1], [],
[AC_DIAGNOSE(syntax,
[$0($1, ...): suspicious presence of an AC_DEFINE in the second argument, ]dnl
[where no actions should be taken])])dnl
AC_VAR_SET_IFELSE([$1],
[echo $ECHO_N "(cached) $ECHO_C" >&AS_MESSAGE_FD],
[$2])])
# AC_CACHE_CHECK(MESSAGE, CACHE-ID, COMMANDS)
# -------------------------------------------
# Do not call this macro with a dnl right behind.
m4_define([AC_CACHE_CHECK],
[AC_MSG_CHECKING([$1])
AC_CACHE_VAL([$2], [$3])dnl
AC_MSG_RESULT_UNQUOTED([AC_VAR_GET([$2])])])
## ---------------------- ##
## Defining CPP symbols. ##
## ---------------------- ##
# AC_DEFINE_TRACE_LITERAL(LITERAL-CPP-SYMBOL)
# -------------------------------------------
# This macro is useless, it is used only with --trace to collect the
# list of *literals* CPP values passed to AC_DEFINE/AC_DEFINE_UNQUOTED.
m4_define([AC_DEFINE_TRACE_LITERAL])
# AC_DEFINE_TRACE(CPP-SYMBOL)
# ---------------------------
# This macro is a wrapper around AC_DEFINE_TRACE_LITERAL which filters
# out non literal symbols.
m4_define([AC_DEFINE_TRACE],
[AC_VAR_INDIR_IFELSE([$1], [], [AC_DEFINE_TRACE_LITERAL([$1])])])
# AC_DEFINE(VARIABLE, [VALUE], [DESCRIPTION])
# -------------------------------------------
# Set VARIABLE to VALUE, verbatim, or 1. Remember the value
# and if VARIABLE is affected the same VALUE, do nothing, else
# die. The third argument is used by autoheader.
m4_define([AC_DEFINE],
[AC_DEFINE_TRACE([$1])dnl
ifval([$3], [AH_TEMPLATE([$1], [$3])])dnl
cat >>confdefs.h <<\EOF
[#define] $1 ifelse($#, 2, [$2], $#, 3, [$2], 1)
EOF
])
# AC_DEFINE_UNQUOTED(VARIABLE, [VALUE], [DESCRIPTION])
# ----------------------------------------------------
# Similar, but perform shell substitutions $ ` \ once on VALUE.
m4_define([AC_DEFINE_UNQUOTED],
[AC_DEFINE_TRACE([$1])dnl
ifval([$3], [AH_TEMPLATE([$1], [$3])])dnl
cat >>confdefs.h <<EOF
[#define] $1 ifelse($#, 2, [$2], $#, 3, [$2], 1)
EOF
])
## -------------------------- ##
## Setting output variables. ##
## -------------------------- ##
# _AC_SUBST(VARIABLE, PROGRAM)
# ----------------------------
# If VARIABLE has not already been AC_SUBST'ed, append the sed PROGRAM
# to `_AC_SUBST_SED_PROGRAM'.
m4_define([_AC_SUBST],
[AC_EXPAND_ONCE([m4_append([_AC_SUBST_SED_PROGRAM],
[$2
])])dnl
])
# Initialize.
m4_define([_AC_SUBST_SED_PROGRAM])
# AC_SUBST(VARIABLE, [VALUE])
# ---------------------------
# Create an output variable from a shell VARIABLE. If VALUE is given
# assign it to VARIABLE. Use `""' is you want to set VARIABLE to an
# empty value, not an empty second argument.
#
# Beware that if you change this macro, you also have to change the
# sed script at the top of _AC_OUTPUT_FILES.
m4_define([AC_SUBST],
[m4_ifvanl([$2], [$1=$2])[]dnl
_AC_SUBST([$1], [s,@$1@,[$]$1,;t t])dnl
])# AC_SUBST
# AC_SUBST_FILE(VARIABLE)
# -----------------------
# Read the comments of the preceding macro.
m4_define([AC_SUBST_FILE],
[_AC_SUBST([$1], [/@$1@/r [$]$1
s,@$1@,,;t t])])
## --------------------------------------- ##
## Printing messages at autoconf runtime. ##
## --------------------------------------- ##
# In fact, I think we should promote the use of m4_warn and m4_fatal
# directly. This will also avoid to some people to get it wrong
# between AC_FATAL and AC_MSG_ERROR.
# AC_DIAGNOSE(CATEGORY, MESSAGE)
# ------------------------------
# Report a MESSAGE to the user of autoconf if `-W' or `-W all' was
# specified.
m4_define([AC_DIAGNOSE],
[m4_warn($@)])
# AC_WARNING(MESSAGE)
# -------------------
# Report a MESSAGE to the user of autoconf if `-W' or `-W all' was
# specified.
m4_define([AC_WARNING],
[AC_DIAGNOSE([syntax], [$1])])
# AC_FATAL(MESSAGE, [EXIT-STATUS])
# --------------------------------
m4_define([AC_FATAL],
[m4_fatal($@)])
## ---------------------------------------- ##
## Printing messages at configure runtime. ##
## ---------------------------------------- ##
# _AC_ECHO_N(STRING, [FD = AS_MESSAGE_FD])
# ------------------------------------
# Same as _AS_ECHO, but echo doesn't return to a new line.
m4_define([_AC_ECHO_N],
[echo $ECHO_N "_AS_QUOTE([$1])$ECHO_C" >&m4_default([$2],
[AS_MESSAGE_FD])])
# AC_MSG_CHECKING(FEATURE)
# ------------------------
m4_define([AC_MSG_CHECKING],
[_AS_ECHO([$as_me:__oline__: checking $1], AS_MESSAGE_LOG_FD)
_AC_ECHO_N([checking $1... ])[]dnl
])
# AC_MSG_RESULT(RESULT)
# ---------------------
m4_define([AC_MSG_RESULT],
[_AS_ECHO([$as_me:__oline__: result: $1], AS_MESSAGE_LOG_FD)
_AS_ECHO([${ECHO_T}$1])[]dnl
])
# AC_MSG_RESULT_UNQUOTED(RESULT)
# ------------------------------
# Likewise, but perform $ ` \ shell substitutions.
m4_define([AC_MSG_RESULT_UNQUOTED],
[_AS_ECHO_UNQUOTED([$as_me:__oline__: result: $1], AS_MESSAGE_LOG_FD)
_AS_ECHO_UNQUOTED([${ECHO_T}$1])[]dnl
])
# AC_MSG_WARN(PROBLEM)
# AC_MSG_NOTICE(STRING)
# AC_MSG_ERROR(ERROR, [EXIT-STATUS = 1])
# --------------------------------------
m4_define([AC_MSG_WARN], [AS_WARN($@)])
m4_define([AC_MSG_NOTICE], [AS_MESSAGE($@)])
m4_define([AC_MSG_ERROR], [AS_ERROR($@)])
# AU::AC_CHECKING(FEATURE)
# ------------------------
AU_DEFUN([AC_CHECKING],
[AS_MESSAGE([checking $1...])])
# AU::AC_VERBOSE(STRING)
# ----------------------
AU_ALIAS([AC_VERBOSE], [AC_MSG_RESULT])
## ---------------------------- ##
## Compiler-running mechanics. ##
## ---------------------------- ##
# AC_TRY_EVAL(VARIABLE)
# ---------------------
# The purpose of this macro is to "configure:123: command line"
# written into config.log for every test run.
AC_DEFUN([AC_TRY_EVAL],
[{ (eval echo $as_me:__oline__: \"[$]$1\") >&AS_MESSAGE_LOG_FD; dnl
(eval [$]$1) 2>&AS_MESSAGE_LOG_FD; }])
# AC_TRY_COMMAND(COMMAND)
# -----------------------
AC_DEFUN([AC_TRY_COMMAND],
[{ ac_try='$1'; AC_TRY_EVAL(ac_try); }])
## ------------------ ##
## Default includes. ##
## ------------------ ##
# Always use the same set of default headers for all the generic
# macros. It is easier to document, to extend, and to understand than
# having specific defaults for each macro.
# Of course, one would like to issue these default headers only if
# they were used, i.e.., AC_INCLUDES_DEFAULT was called, and the
# default `branch' was run. Unfortunately AC_INCLUDES_DEFAULT is
# called unquoted, so it is unsafe to try to divert from there.
# Therefore, the following *is* buggy, but this is the kind of
# tradeoff we accept in order to improve configure.
# See _AC_INIT_PREPARE to see the value of `ac_includes_default'.
# AC_INCLUDES_DEFAULT([INCLUDES])
# -------------------------------
# If INCLUDES is empty, expand in default includes, otherwise in
# INCLUDES.
#
# The end-of-line after `$[1]' below is meant, and it is actually
# because this new line is meant that we don't use m4_default. The
# problem is that this macro is used *unquoted* in AC_TRY_COMPILE
# etc. It is used unquoted because unfortunately (this is a real
# pain), AC_TRY_COMPILE is over quoting some of its arguments. This
# is a sad decision.
#
# Still, there are calls such as this
#
# AC_TRY_COMPILE(AC_INCLUDES_DEFAULT([#include <pwd.h>]),
# AC_BLAH_BLAH..)
#
# Because AC_INCLUDES_DEFAULT *has* to be unquoted, after evaluation,
# if there were no end of line, you'd get
#
# AC_TRY_COMPILE(#include <pwd.h>,
# AC_BLAH_BLAH,
# AC_MORE_BLAH_BLAH)
#
# i.e. the first argument given to AC_TRY_COMPILE is
#
# #include <pwd.h>,
# AC_BLAH_BLAH
#
# (note how the comma was swallowed because of the comment mark) and
# the second is
#
# AC_MORE_BLAH_BLAH
#
# so all the arguments are shifted.
#
# Because I don't see any backward compatible means to fix the
# brokenness of AC_TRY_COMPILE, we are doomed to leave a extra new
# line here.
m4_define([AC_INCLUDES_DEFAULT],
[ifelse([$1], [], [$ac_includes_default], [$1
])])
## -------------------------- ##
## Generic structure checks. ##
## -------------------------- ##
# AC_CHECK_MEMBER(AGGREGATE.MEMBER,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# ---------------------------------------------------------
# AGGREGATE.MEMBER is for instance `struct passwd.pw_gecos', shell
# variables are not a valid argument.
AC_DEFUN([AC_CHECK_MEMBER],
[AC_VAR_INDIR_IFELSE([$1],
[AC_FATAL([$0: requires literal arguments])])dnl
ifelse(m4_regexp([$1], [\.]), -1,
[AC_FATAL([$0: Did not see any dot in `$1'])])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_VAR_PUSHDEF([ac_Member], [ac_cv_member_$1])dnl
dnl Extract the aggregate name, and the member name
AC_CACHE_CHECK([for $1], ac_Member,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT([$4])],
[dnl AGGREGATE foo;
m4_patsubst([$1], [\..*]) foo;
dnl foo.MEMBER;
foo.m4_patsubst([$1], [^[^.]*\.]);])],
AC_VAR_SET(ac_Member, yes),
AC_VAR_SET(ac_Member, no))])
AS_IFELSE([test AC_VAR_GET(ac_Member) = yes],
[$2], [$3])dnl
AC_VAR_POPDEF([ac_Member])dnl
])# AC_CHECK_MEMBER
# AC_CHECK_MEMBERS([AGGREGATE.MEMBER, ...],
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]
# [INCLUDES])
# ---------------------------------------------------------
# The first argument is an m4 list.
AC_DEFUN([AC_CHECK_MEMBERS],
[m4_foreach([AC_Member], [$1],
[AC_CHECK_MEMBER(AC_Member,
[AC_DEFINE_UNQUOTED(AC_TR_CPP(HAVE_[]AC_Member), 1,
[Define if `]m4_patsubst(AC_Member,
[^[^.]*\.])[' is
member of `]m4_patsubst(AC_Member, [\..*])['.])
$2],
[$3],
[$4])])])
## ----------------------- ##
## Checking for programs. ##
## ----------------------- ##
# AC_SHELL_PATH_WALK([PATH = $PATH], BODY)
# ----------------------------------------
# Walk through PATH running BODY for each `ac_dir'.
#
# `$ac_dummy' forces splitting on constant user-supplied paths.
# POSIX.2 word splitting is done only on the output of word
# expansions, not every word. This closes a longstanding sh security
# hole.
m4_define([AC_SHELL_PATH_WALK],
[ac_save_IFS=$IFS; IFS=':'
ac_dummy="m4_default([$1], [$PATH])"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$2
done
])
# AC_CHECK_PROG(VARIABLE, PROG-TO-CHECK-FOR,
# [VALUE-IF-FOUND], [VALUE-IF-NOT-FOUND],
# [PATH], [REJECT])
# -----------------------------------------------------
AC_DEFUN([AC_CHECK_PROG],
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=$[2]
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_prog_$1,
[if test -n "$$1"; then
ac_cv_prog_$1="$$1" # Let the user override the test.
else
m4_ifvanl([$6],
[ ac_prog_rejected=no])dnl
AC_SHELL_PATH_WALK([$5],
[test -f "$ac_dir/$ac_word" || continue
m4_ifvanl([$6],
[if test "$ac_dir/$ac_word" = "$6"; then
ac_prog_rejected=yes
continue
fi])dnl
ac_cv_prog_$1="$3"
break])
m4_ifvanl([$6],
[if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_$1
shift
if test $[@%:@] != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set $1 to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" ${1+"$[@]"}
shift
ac_cv_prog_$1="$[@]"
ifelse([$2], [$4],
[ else
# Default is a loser.
AC_MSG_ERROR([$1=$6 unacceptable, but no other $4 found in dnl
m4_default([$5], [\$PATH])])
])dnl
fi
fi])dnl
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_CHECK_PROGS will keep looking.
m4_ifvanl([$4],
[ test -z "$ac_cv_prog_$1" && ac_cv_prog_$1="$4"])dnl
fi])dnl
$1=$ac_cv_prog_$1
if test -n "$$1"; then
AC_MSG_RESULT([$$1])
else
AC_MSG_RESULT([no])
fi
AC_SUBST($1)dnl
])# AC_CHECK_PROG
# AC_CHECK_PROGS(VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND],
# [PATH])
# ------------------------------------------------------------------
AC_DEFUN([AC_CHECK_PROGS],
[for ac_prog in $2
do
AC_CHECK_PROG([$1], [$ac_prog], [$ac_prog], , [$4])
test -n "$$1" && break
done
m4_ifvanl([$3], [test -n "$$1" || $1="$3"])])
# AC_PATH_PROG(VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH])
# -----------------------------------------------------------------------
AC_DEFUN([AC_PATH_PROG],
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=$[2]
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL([ac_cv_path_$1],
[case $$1 in
[[\\/]]* | ?:[[\\/]]*)
ac_cv_path_$1="$$1" # Let the user override the test with a path.
;;
*)
AC_SHELL_PATH_WALK([$4],
[if test -f "$ac_dir/$ac_word"; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi])
dnl If no 3rd arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
m4_ifvanl([$3],
[ test -z "$ac_cv_path_$1" && ac_cv_path_$1="$3"])dnl
;;
esac])dnl
AC_SUBST([$1], [$ac_cv_path_$1])
if test -n "$$1"; then
AC_MSG_RESULT([$$1])
else
AC_MSG_RESULT([no])
fi
])# AC_PATH_PROG
# AC_PATH_PROGS(VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND],
# [PATH])
# -----------------------------------------------------------------
AC_DEFUN([AC_PATH_PROGS],
[for ac_prog in $2
do
AC_PATH_PROG([$1], [$ac_prog], , [$4])
test -n "$$1" && break
done
m4_ifvanl([$3], [test -n "$$1" || $1="$3"])dnl
])
## -------------------- ##
## Checking for tools. ##
## -------------------- ##
# AC_CHECK_TOOL_PREFIX
# --------------------
AU_DEFUN([AC_CHECK_TOOL_PREFIX])
# AC_PATH_TOOL(VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH])
# -----------------------------------------------------------------------
# (Use different variables $1 and ac_pt_$1 so that cache vars don't conflict.)
AC_DEFUN([AC_PATH_TOOL],
[if test -n "$ac_tool_prefix"; then
AC_PATH_PROG([$1], [${ac_tool_prefix}$2], , [$4])
fi
if test -z "$ac_cv_path_$1"; then
ac_pt_$1=$$1
AC_PATH_PROG([ac_pt_$1], [$2], [$3], [$4])
$1=$ac_pt_$1
else
$1="$ac_cv_path_$1"
fi
])# AC_PATH_TOOL
# AC_CHECK_TOOL(VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH])
# ------------------------------------------------------------------------
# (Use different variables $1 and ac_ct_$1 so that cache vars don't conflict.)
AC_DEFUN([AC_CHECK_TOOL],
[if test -n "$ac_tool_prefix"; then
AC_CHECK_PROG([$1], [${ac_tool_prefix}$2], [${ac_tool_prefix}$2], , [$4])
fi
if test -z "$ac_cv_prog_$1"; then
ac_ct_$1=$$1
AC_CHECK_PROG([ac_ct_$1], [$2], [$2], [$3], [$4])
$1=$ac_ct_$1
else
$1="$ac_cv_prog_$1"
fi
])# AC_CHECK_TOOL
# AC_CHECK_TOOLS(VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND],
# [PATH])
# ------------------------------------------------------------------
# Check for each tool in PROGS-TO-CHECK-FOR with the cross prefix. If
# none can be found with a cross prefix, then use the first one that
# was found without the cross prefix.
AC_DEFUN([AC_CHECK_TOOLS],
[if test -n "$ac_tool_prefix"; then
for ac_prog in $2
do
AC_CHECK_PROG([$1],
[$ac_tool_prefix$ac_prog], [$ac_tool_prefix$ac_prog],,
[$4])
test -n "$$1" && break
done
fi
if test -z "$$1"; then
ac_ct_$1=$$1
AC_CHECK_PROGS([ac_ct_$1], [$2], [$3], [$4])
$1=$ac_ct_$1
fi
])# AC_CHECK_TOOLS
# AC_PREFIX_PROGRAM(PROGRAM)
# --------------------------
# Guess the value for the `prefix' variable by looking for
# the argument program along PATH and taking its parent.
# Example: if the argument is `gcc' and we find /usr/local/gnu/bin/gcc,
# set `prefix' to /usr/local/gnu.
# This comes too late to find a site file based on the prefix,
# and it might use a cached value for the path.
# No big loss, I think, since most configures don't use this macro anyway.
AC_DEFUN([AC_PREFIX_PROGRAM],
[dnl Get an upper case version of $[1].
m4_pushdef([AC_Prog], m4_toupper([$1]))dnl
if test "x$prefix" = xNONE; then
dnl We reimplement AC_MSG_CHECKING (mostly) to avoid the ... in the middle.
echo $ECHO_N "checking for prefix by $ECHO_C" >&AS_MESSAGE_FD
AC_PATH_PROG(m4_quote(AC_Prog), [$1])
if test -n "$ac_cv_path_[]AC_Prog"; then
prefix=`AS_DIRNAME(["$ac_cv_path_[]AC_Prog"])`
fi
fi
m4_popdef([AC_Prog])dnl
])# AC_PREFIX_PROGRAM
## ------------------------ ##
## Checking for libraries. ##
## ------------------------ ##
# AC_TRY_LINK_FUNC(FUNC, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND)
# ------------------------------------------------------------
# Try to link a program that calls FUNC, handling GCC builtins. If
# the link succeeds, execute ACTION-IF-FOUND; otherwise, execute
# ACTION-IF-NOT-FOUND.
AC_DEFUN([AC_TRY_LINK_FUNC],
[AC_LINK_IFELSE([AC_LANG_CALL([], [$1])], [$2], [$3])])
# AC_SEARCH_LIBS(FUNCTION, SEARCH-LIBS,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [OTHER-LIBRARIES])
# --------------------------------------------------------
# Search for a library defining FUNC, if it's not already available.
AC_DEFUN([AC_SEARCH_LIBS],
[AC_CACHE_CHECK([for library containing $1], [ac_cv_search_$1],
[ac_func_search_save_LIBS=$LIBS
ac_cv_search_$1=no
AC_TRY_LINK_FUNC([$1], [ac_cv_search_$1="none required"])
test "$ac_cv_search_$1" = no && for ac_lib in $2; do
LIBS="-l$ac_lib $5 $ac_func_search_save_LIBS"
AC_TRY_LINK_FUNC([$1],
[ac_cv_search_$1="-l$ac_lib"
break])
done
LIBS=$ac_func_search_save_LIBS])
AS_IFELSE([test "$ac_cv_search_$1" != no],
[test "$ac_cv_search_$1" = "none required" || LIBS="$ac_cv_search_$1 $LIBS"
$3],
[$4])[]dnl
])
# AC_CHECK_LIB(LIBRARY, FUNCTION,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [OTHER-LIBRARIES])
# ------------------------------------------------------
#
# Use a cache variable name containing both the library and function name,
# because the test really is for library $1 defining function $2, not
# just for library $1. Separate tests with the same $1 and different $2s
# may have different results.
#
# FIXME: This macro is extremely suspicious. It DEFINEs unconditionnally,
# whatever the FUNCTION, in addition to not being a *S macro. Note
# that the cache does depend upon the function we are looking for.
#
# It is on purpose we used `ac_check_lib_save_LIBS' and not just
# `ac_save_LIBS': there are many macros which don't want to see `LIBS'
# changed but still want to use AC_CHECK_LIB, so they save `LIBS'.
# And ``ac_save_LIBS' is too tempting a name, so let's leave them some
# freedom.
AC_DEFUN([AC_CHECK_LIB],
[ifval([$3], , [AH_CHECK_LIB([$1])])dnl
AC_VAR_PUSHDEF([ac_Lib], [ac_cv_lib_$1_$2])dnl
AC_ARG_VAR([LDFLAGS], [linker flags, e.g. -L<lib dir> if you have libraries in a nonstandard directory <lib dir>])
AC_CACHE_CHECK([for $2 in -l$1], ac_Lib,
[ac_check_lib_save_LIBS=$LIBS
LIBS="-l$1 $5 $LIBS"
AC_TRY_LINK_FUNC([$2],
[AC_VAR_SET(ac_Lib, yes)],
[AC_VAR_SET(ac_Lib, no)])
LIBS=$ac_check_lib_save_LIBS])
AS_IFELSE([test AC_VAR_GET(ac_Lib) = yes],
[m4_default([$3],
[AC_DEFINE_UNQUOTED(AC_TR_CPP(HAVE_LIB$1))
LIBS="-l$1 $LIBS"
])],
[$4])dnl
AC_VAR_POPDEF([ac_Lib])dnl
])# AC_CHECK_LIB
# AH_CHECK_LIB(LIBNAME)
# ---------------------
m4_define([AH_CHECK_LIB],
[AH_TEMPLATE(AC_TR_CPP(HAVE_LIB$1),
[Define if you have the `]$1[' library (-l]$1[).])])
# AC_HAVE_LIBRARY(LIBRARY,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [OTHER-LIBRARIES])
# ---------------------------------------------------------
#
# This macro is equivalent to calling `AC_CHECK_LIB' with a FUNCTION
# argument of `main'. In addition, LIBRARY can be written as any of
# `foo', `-lfoo', or `libfoo.a'. In all of those cases, the compiler
# is passed `-lfoo'. However, LIBRARY cannot be a shell variable;
# it must be a literal name.
AU_DEFUN([AC_HAVE_LIBRARY],
[m4_pushdef([AC_Lib_Name],
m4_patsubst(m4_patsubst([[$1]],
[lib\([^\.]*\)\.a], [\1]),
[-l], []))dnl
AC_CHECK_LIB(AC_Lib_Name, main, [$2], [$3], [$4])dnl
ac_cv_lib_[]AC_Lib_Name()=ac_cv_lib_[]AC_Lib_Name()_main
m4_popdef([AC_Lib_Name])dnl
])
## ------------------------ ##
## Examining declarations. ##
## ------------------------ ##
# _AC_TRY_CPP
# -----------
# Run cpp and set ac_cpp_err to "yes" for an error, to
# "$ac_(c,cxx)_preproc_warn_flag" if there are warnings or to "" if
# neither warnings nor errors have been detected. eval is necessary
# to expand ac_cpp. It may put trace lines to conftest.err when run
# under sh -x (e.g. when zsh is used), so we filter them out.
#
# Do not require AC_PROG_CPP since this macro is also used by AC_PROG_CPP.
AC_DEFUN([_AC_TRY_CPP],
[ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.err"
if AC_TRY_EVAL(ac_try); then
if egrep -v '^ *\+' conftest.err | grep . >/dev/null; then
ac_cpp_err=$ac_[]_AC_LANG_ABBREV[]_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
])# _AC_TRY_CPP
# AC_TRY_CPP(INCLUDES, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# ---------------------------------------------------------
# AC_TRY_CPP is used to check whether particular header files exist.
# You can check for one at a time, or more than one if you need several
# header files to all exist for some purpose.
#
# INCLUDES are not defaulted.
AC_DEFUN([AC_TRY_CPP],
[AC_LANG_PREPROC_REQUIRE()dnl
AC_LANG_CONFTEST([AC_LANG_SOURCE([[$1]])])
_AC_TRY_CPP()
if test -z "$ac_cpp_err"; then
m4_default([$2], :)
else
cat conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
$3
fi
rm -f conftest*
])# AC_TRY_CPP
# AC_EGREP_CPP(PATTERN, PROGRAM,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ------------------------------------------------------
# Because this macro is used by AC_PROG_GCC_TRADITIONAL, which must
# come early, it is not included in AC_BEFORE checks.
AC_DEFUN([AC_EGREP_CPP],
[AC_LANG_PREPROC_REQUIRE()dnl
AC_LANG_CONFTEST([AC_LANG_SOURCE([[$2]])])
dnl eval is necessary to expand ac_cpp.
dnl Ultrix and Pyramid sh refuse to redirect output of eval, so use subshell.
if (eval "$ac_cpp conftest.$ac_ext") 2>&AS_MESSAGE_LOG_FD |
dnl Quote $1 to prevent m4 from eating character classes
egrep "[$1]" >/dev/null 2>&1; then
m4_default([$3], :)
m4_ifvanl([$4], [else
$4])dnl
fi
rm -f conftest*
])# AC_EGREP_CPP
# AC_EGREP_HEADER(PATTERN, HEADER-FILE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ---------------------------------------------------------
AC_DEFUN([AC_EGREP_HEADER],
[AC_EGREP_CPP([$1],
[#include <$2>
], [$3], [$4])])
## ------------------ ##
## Examining syntax. ##
## ------------------ ##
# _AC_COMPILE_IFELSE(PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ---------------------------------------------------------------------
# Try to compile PROGRAM.
# This macro can be used during the selection of a compiler.
m4_define([_AC_COMPILE_IFELSE],
[m4_ifvanl([$1], [AC_LANG_CONFTEST([$1])])dnl
rm -f conftest.$ac_objext
if AC_TRY_EVAL(ac_compile) && test -s conftest.$ac_objext; then
m4_default([$2], :)
else
echo "$as_me: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
m4_ifvanl([$3],[ $3])dnl
fi
rm -f conftest.$ac_objext ifval([$1], [conftest.$ac_ext])[]dnl
])# _AC_COMPILE_IFELSE
# AC_COMPILE_IFELSE(PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# --------------------------------------------------------------------
# Try to compile PROGRAM. Requires that the compiler for the current
# language was checked for, hence do not use this macro in macros looking
# for a compiler.
AC_DEFUN([AC_COMPILE_IFELSE],
[AC_LANG_COMPILER_REQUIRE()dnl
_AC_COMPILE_IFELSE($@)])
# AC_TRY_COMPILE(INCLUDES, FUNCTION-BODY,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# --------------------------------------------------------
AC_DEFUN([AC_TRY_COMPILE],
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[$1]], [[$2]])], [$3], [$4])])
## --------------------- ##
## Examining libraries. ##
## --------------------- ##
# _AC_LINK_IFELSE(PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ------------------------------------------------------------------
# Try to link PROGRAM.
# This macro can be used during the selection of a compiler.
m4_define([_AC_LINK_IFELSE],
[m4_ifvanl([$1], [AC_LANG_CONFTEST([$1])])dnl
rm -f conftest.$ac_objext conftest$ac_exeext
if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
m4_default([$2], :)
else
echo "$as_me: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
m4_ifvanl([$3], [ $3])dnl
fi
rm -f conftest$ac_exeext ifval([$1], [conftest.$ac_ext])[]dnl
])# _AC_LINK_IFELSE
# AC_LINK_IFELSE(PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -----------------------------------------------------------------
# Try to link PROGRAM. Requires that the compiler for the current
# language was checked for, hence do not use this macro in macros looking
# for a compiler.
AC_DEFUN([AC_LINK_IFELSE],
[AC_LANG_COMPILER_REQUIRE()dnl
_AC_LINK_IFELSE($@)])
# AC_TRY_LINK(INCLUDES, FUNCTION-BODY,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -----------------------------------------------------
# Should the INCLUDES be defaulted here?
# Contrarily to AC_LINK_IFELSE, this macro double quote its first two args.
# FIXME: WARNING: The code to compile was different in the case of
# Fortran between AC_TRY_COMPILE and AC_TRY_LINK, though they should
# equivalent as far as I can tell from the semantics and the docs. In
# the former, $[2] is used as is, in the latter, it is `call' ed.
# Remove these FIXME: once truth established.
AC_DEFUN([AC_TRY_LINK],
[AC_LINK_IFELSE([AC_LANG_PROGRAM([[$1]], [[$2]])], [$3], [$4])])
# AC_COMPILE_CHECK(ECHO-TEXT, INCLUDES, FUNCTION-BODY,
# ACTION-IF-FOUND, [ACTION-IF-NOT-FOUND])
# --------------------------------------------------------
AU_DEFUN([AC_COMPILE_CHECK],
[m4_ifvanl([$1], [AC_CHECKING([for $1])])dnl
AC_LINK_IFELSE([AC_LANG_PROGRAM([[$2]], [[$3]])], [$4], [$5])
])
## -------------------------------- ##
## Checking for run-time features. ##
## -------------------------------- ##
# _AC_RUN_IFELSE(PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# ------------------------------------------------------------
# Compile, link, and run.
# This macro can be used during the selection of a compiler.
m4_define([_AC_RUN_IFELSE],
[m4_ifvanl([$1], [AC_LANG_CONFTEST([$1])])dnl
rm -f conftest$ac_exeext
if AC_TRY_EVAL(ac_link) &&
test -s conftest$ac_exeext && (./conftest$ac_exeext; exit) 2>/dev/null; then
m4_default([$2], :)
else
echo "$as_me: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
m4_ifvanl([$3], [ $3])dnl
fi
rm -f conftest$ac_exeext ifval([$1], [conftest.$ac_ext])[]dnl
])# _AC_RUN_IFELSE
# AC_RUN_IFELSE(PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# -----------------------------------------------------------
# Compile, link, and run. Requires that the compiler for the current
# language was checked for, hence do not use this macro in macros looking
# for a compiler.
AC_DEFUN([AC_RUN_IFELSE],
[AC_LANG_COMPILER_REQUIRE()dnl
_AC_RUN_IFELSE($@)])
# AC_TRY_RUN(PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE],
# [ACTION-IF-CROSS-COMPILING])
# --------------------------------------------------------
AC_DEFUN([AC_TRY_RUN],
[ifval([$4], [],
[AC_DIAGNOSE([cross],
[$0 called without default to allow cross compiling])])dnl
if test "$cross_compiling" = yes; then
m4_default([$4],
[AC_MSG_ERROR([cannot run test program while cross compiling])])
else
AC_RUN_IFELSE([AC_LANG_SOURCE([[$1]])], [$2], [$3])
fi
])# AC_TRY_RUN
## ------------------------------------- ##
## Checking for the existence of files. ##
## ------------------------------------- ##
# AC_CHECK_FILE(FILE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -------------------------------------------------------------
#
# Check for the existence of FILE.
AC_DEFUN([AC_CHECK_FILE],
[AC_DIAGNOSE([cross],
[Cannot check for file existence when cross compiling])dnl
AC_VAR_PUSHDEF([ac_File], [ac_cv_file_$1])dnl
AC_CACHE_CHECK([for $1], ac_File,
[test "$cross_compiling" = yes &&
AC_MSG_ERROR([Cannot check for file existence when cross compiling])
if test -r "$1"; then
AC_VAR_SET(ac_File, yes)
else
AC_VAR_SET(ac_File, no)
fi])
AS_IFELSE([test AC_VAR_GET(ac_File) = yes],
[$2], [$3])dnl
AC_VAR_POPDEF([ac_File])dnl
])# AC_CHECK_FILE
# AC_CHECK_FILES(FILE..., [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -----------------------------------------------------------------
AC_DEFUN([AC_CHECK_FILES],
[AC_FOREACH([AC_FILE_NAME], [$1],
[AC_CHECK_FILE(AC_FILE_NAME,
[AC_DEFINE_UNQUOTED(AC_TR_CPP(HAVE_[]AC_FILE_NAME), 1,
[Define if you have the file `]AC_File['.])
$2],
[$3])])])
## ------------------------------- ##
## Checking for declared symbols. ##
## ------------------------------- ##
# AC_CHECK_DECL(SYMBOL,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# -------------------------------------------------------
# Check if SYMBOL (a variable or a function) is declared.
AC_DEFUN([AC_CHECK_DECL],
[AC_VAR_PUSHDEF([ac_Symbol], [ac_cv_have_decl_$1])dnl
AC_CACHE_CHECK([whether $1 is declared], ac_Symbol,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT([$4])],
[#ifndef $1
char *p = (char *) $1;
#endif
])],
AC_VAR_SET(ac_Symbol, yes), AC_VAR_SET(ac_Symbol, no))])
AS_IFELSE([test AC_VAR_GET(ac_Symbol) = yes],
[$2], [$3])dnl
AC_VAR_POPDEF([ac_Symbol])dnl
])# AC_CHECK_DECL
# AC_CHECK_DECLS(SYMBOLS,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# --------------------------------------------------------
# Defines HAVE_DECL_SYMBOL to 1 if declared, 0 otherwise. See the
# documentation for a detailed explanation of this difference with
# other AC_CHECK_*S macros. SYMBOLS is an m4 list.
AC_DEFUN([AC_CHECK_DECLS],
[m4_foreach([AC_Symbol], [$1],
[AC_CHECK_DECL(AC_Symbol,
[AC_DEFINE_UNQUOTED(AC_TR_CPP([HAVE_DECL_]AC_Symbol), 1,
[Define to 1 if you have the declaration
of `]AC_Symbol[', and to 0 if you don't.])
$2],
[AC_DEFINE_UNQUOTED(AC_TR_CPP([HAVE_DECL_]AC_Symbol), 0)
$3],
[$4])])
])# AC_CHECK_DECLS
## -------------------------------- ##
## Checking for library functions. ##
## -------------------------------- ##
# AC_LIBOBJ_DECL(FILENAME-NOEXT)
# ------------------------------
# Announce we might need the file `FILENAME-NOEXT.c'.
m4_define([AC_LIBOBJ_DECL], [])
# _AC_LIBOBJ(FILENAME-NOEXT, ACTION-IF-INDIR)
# -------------------------------------------
# We need `FILENAME-NOEXT.o', save this into `LIBOBJS'.
# We don't use AC_SUBST/2 because it forces an unneeded eol.
m4_define([_AC_LIBOBJ],
[AC_VAR_INDIR_IFELSE([$1],
[$2],
[AC_LIBOBJ_DECL([$1])])dnl
AC_SUBST([LIBOBJS])dnl
LIBOBJS="$LIBOBJS $1.$ac_objext"])
# AC_LIBOBJ(FILENAME-NOEXT)
# -------------------------
# We need `FILENAME-NOEXT.o', save this into `LIBOBJS'.
# We don't use AC_SUBST/2 because it forces an unneeded eol.
m4_define([AC_LIBOBJ],
[_AC_LIBOBJ([$1],
[AC_DIAGNOSE(syntax,
[$0($1): you should use literals])])dnl
])
## ----------------------------------- ##
## Checking compiler characteristics. ##
## ----------------------------------- ##
# _AC_COMPUTE_INT_COMPILE(EXPRESSION, VARIABLE, [INCLUDES])
# ---------------------------------------------------------
# Compute the integer EXPRESSION and store the result in the VARIABLE.
# Works OK if cross compiling.
m4_define([_AC_COMPUTE_INT_COMPILE],
[# Depending upon the size, compute the lo and hi bounds.
AC_COMPILE_IFELSE([AC_LANG_BOOL_COMPILE_TRY([$3], [($1) >= 0])],
[ac_lo=0 ac_try=0
while :; do
AC_COMPILE_IFELSE([AC_LANG_BOOL_COMPILE_TRY([$3], [($1) <= $ac_try])],
[ac_hi=$ac_try; break],
[ac_lo=`expr $ac_try + 1`; ac_try=`expr 2 '*' $ac_try + 1`])
done],
[ac_hi=-1 ac_try=-1
while :; do
AC_COMPILE_IFELSE([AC_LANG_BOOL_COMPILE_TRY([$3], [($1) >= $ac_try])],
[ac_lo=$ac_try; break],
[ac_hi=`expr $ac_try - 1`; ac_try=`expr 2 '*' $ac_try`])
done])
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_try=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
AC_COMPILE_IFELSE([AC_LANG_BOOL_COMPILE_TRY([$3], [($1) <= $ac_try])],
[ac_hi=$ac_try], [ac_lo=`expr $ac_try + 1`])
done
$2=$ac_lo[]dnl
])# _AC_COMPUTE_INT_COMPILE
# _AC_COMPUTE_INT_RUN(EXPRESSION, VARIABLE, [INCLUDES], [IF-FAILS])
# -----------------------------------------------------------------
# Store the evaluation of the integer EXPRESSION in VARIABLE.
m4_define([_AC_COMPUTE_INT_RUN],
[AC_RUN_IFELSE([AC_LANG_INT_SAVE([$3], [$1])],
[$2=`cat conftestval`], [$4])])
# _AC_COMPUTE_INT(EXPRESSION, VARIABLE, INCLUDES, IF-FAILS)
# ---------------------------------------------------------
m4_define([_AC_COMPUTE_INT],
[if test "$cross_compiling" = yes; then
_AC_COMPUTE_INT_COMPILE([$1], [$2], [$3])
else
_AC_COMPUTE_INT_RUN([$1], [$2], [$3], [$4])
fi
rm -f conftestval[]dnl
])# _AC_COMPUTE_INT
# AC_CHECK_SIZEOF(TYPE, [IGNORED], [INCLUDES])
# --------------------------------------------
AC_DEFUN([AC_CHECK_SIZEOF],
[AC_VAR_INDIR_IFELSE([$1],
[AC_FATAL([$0: requires literal arguments])])dnl
AC_CHECK_TYPE([$1], [], [], [$3])
AC_CACHE_CHECK([size of $1], AC_TR_SH([ac_cv_sizeof_$1]),
[if test "$AC_TR_SH([ac_cv_type_$1])" = yes; then
_AC_COMPUTE_INT([sizeof ($1)],
[AC_TR_SH([ac_cv_sizeof_$1])],
[AC_INCLUDES_DEFAULT([$3])])
else
AC_TR_SH([ac_cv_sizeof_$1])=0
fi])dnl
AC_DEFINE_UNQUOTED(AC_TR_CPP(sizeof_$1), $AC_TR_SH([ac_cv_sizeof_$1]),
[The size of a `$1', as computed by sizeof.])
])# AC_CHECK_SIZEOF
## -------------------- ##
## Checking for types. ##
## -------------------- ##
# Up to 2.13 included, Autoconf used to provide the macro
#
# AC_CHECK_TYPE(TYPE, DEFAULT)
#
# Since, it provides another version which fits better with the other
# AC_CHECK_ families:
#
# AC_CHECK_TYPE(TYPE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
#
# In order to provide backward compatibility, the new scheme is
# implemented as _AC_CHECK_TYPE_NEW, the old scheme as _AC_CHECK_TYPE_OLD,
# and AC_CHECK_TYPE branches to one or the other, depending upon its
# arguments.
# _AC_CHECK_TYPE_NEW(TYPE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# ------------------------------------------------------------
# Check whether the type TYPE is supported by the system, maybe via the
# the provided includes. This macro implements the former task of
# AC_CHECK_TYPE, with one big difference though: AC_CHECK_TYPE was
# grepping in the headers, which, BTW, led to many problems until
# the egrep expression was correct and did not given false positives.
# It turned out there are even portability issues with egrep...
#
# The most obvious way to check for a TYPE is just to compile a variable
# definition:
#
# TYPE my_var;
#
# Unfortunately this does not work for const qualified types in C++,
# where you need an initializer. So you think of
#
# TYPE my_var = (TYPE) 0;
#
# Unfortunately, again, this is not valid for some C++ classes.
#
# Then you look for another scheme. For instance you think of declaring
# a function which uses a parameter of type TYPE:
#
# int foo (TYPE param);
#
# but of course you soon realize this does not make it with K&R
# compilers. And by no ways you want to
#
# int foo (param)
# TYPE param
# { ; }
#
# since this time it's C++ who is not happy.
#
# Don't even think of the return type of a function, since K&R cries
# there too. So you start thinking of declaring a *pointer* to this TYPE:
#
# TYPE *p;
#
# but you know fairly well that this is legal in C for aggregates which
# are unknown (TYPE = struct does-not-exist).
#
# Then you think of using sizeof to make sure the TYPE is really
# defined:
#
# sizeof (TYPE);
#
# But this succeeds if TYPE is a variable: you get the size of the
# variable's type!!!
#
# This time you tell yourself the last two options *together* will make
# it. And indeed this is the solution invented by Alexandre Oliva.
#
# Also note that we use
#
# if (sizeof (TYPE))
#
# to `read' sizeof (to avoid warnings), while not depending on its type
# (not necessarily size_t etc.). Equally, instead of defining an unused
# variable, we just use a cast to avoid warnings from the compiler.
# Suggested by Paul Eggert.
m4_define([_AC_CHECK_TYPE_NEW],
[AC_REQUIRE([AC_HEADER_STDC])dnl
AC_VAR_PUSHDEF([ac_Type], [ac_cv_type_$1])dnl
AC_CACHE_CHECK([for $1], ac_Type,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT([$4])],
[if (($1 *) 0)
return 0;
if (sizeof ($1))
return 0;])],
AC_VAR_SET(ac_Type, yes),
AC_VAR_SET(ac_Type, no))])
AS_IFELSE([test AC_VAR_GET(ac_Type) = yes],
[$2], [$3])dnl
AC_VAR_POPDEF([ac_Type])dnl
])# _AC_CHECK_TYPE_NEW
# AC_CHECK_TYPES(TYPES,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# --------------------------------------------------------
# TYPES is an m4 list. There are no ambiguities here, we mean the newer
# AC_CHECK_TYPE.
AC_DEFUN([AC_CHECK_TYPES],
[m4_foreach([AC_Type], [$1],
[_AC_CHECK_TYPE_NEW(AC_Type,
[AC_DEFINE_UNQUOTED(AC_TR_CPP(HAVE_[]AC_Type), 1,
[Define if the system has the type
`]AC_Type['.])
$2],
[$3],
[$4])])])
# _AC_CHECK_TYPE_OLD(TYPE, DEFAULT)
# ---------------------------------
# FIXME: This is an extremely badly chosen name, since this
# macro actually performs an AC_REPLACE_TYPE. Some day we
# have to clean this up.
m4_define([_AC_CHECK_TYPE_OLD],
[_AC_CHECK_TYPE_NEW([$1],,
[AC_DEFINE_UNQUOTED([$1], [$2],
[Define to `$2' if <sys/types.h> does not define.])])dnl
])# _AC_CHECK_TYPE_OLD
# _AC_CHECK_TYPE_REPLACEMENT_TYPE_P(STRING)
# -----------------------------------------
# Return `1' if STRING seems to be a builtin C/C++ type, i.e., if it
# starts with `_Bool', `bool', `char', `double', `float', `int',
# `long', `short', `signed', or `unsigned' followed by characters
# that are defining types.
# Because many people have used `off_t' and `size_t' too, they are added
# for better common-useward backward compatibility.
m4_define([_AC_CHECK_TYPE_REPLACEMENT_TYPE_P],
[ifelse(m4_regexp([$1],
[^\(_Bool\|bool\|char\|double\|float\|int\|long\|short\|\(un\)?signed\|size_t\|off_t\)\([_a-zA-Z0-9() *]\|\[\|\]\)*$]),
0, 1, 0)dnl
])# _AC_CHECK_TYPE_REPLACEMENT_TYPE_P
# _AC_CHECK_TYPE_MAYBE_TYPE_P(STRING)
# -----------------------------------
# Return `1' if STRING looks like a C/C++ type.
m4_define([_AC_CHECK_TYPE_MAYBE_TYPE_P],
[ifelse(m4_regexp([$1], [^[_a-zA-Z0-9 ]+\([_a-zA-Z0-9() *]\|\[\|\]\)*$]),
0, 1, 0)dnl
])# _AC_CHECK_TYPE_MAYBE_TYPE_P
# AC_CHECK_TYPE(TYPE, DEFAULT)
# or
# AC_CHECK_TYPE(TYPE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
# [INCLUDES])
# -------------------------------------------------------
#
# Dispatch respectively to _AC_CHECK_TYPE_OLD or _AC_CHECK_TYPE_NEW.
# 1. More than two arguments => NEW
# 2. $2 seems to be replacement type => OLD
# See _AC_CHECK_TYPE_REPLACEMENT_TYPE_P for `replacement type'.
# 3. $2 seems to be a type => NEW plus a warning
# 4. default => NEW
AC_DEFUN([AC_CHECK_TYPE],
[ifelse($#, 3,
[_AC_CHECK_TYPE_NEW($@)],
$#, 4,
[_AC_CHECK_TYPE_NEW($@)],
_AC_CHECK_TYPE_REPLACEMENT_TYPE_P([$2]), 1,
[_AC_CHECK_TYPE_OLD($@)],
_AC_CHECK_TYPE_MAYBE_TYPE_P([$2]), 1,
[AC_DIAGNOSE([syntax],
[$0: assuming `$2' is not a type])_AC_CHECK_TYPE_NEW($@)],
[_AC_CHECK_TYPE_NEW($@)])[]dnl
])# AC_CHECK_TYPE
## ----------------------- ##
## Creating output files. ##
## ----------------------- ##
# This section handles about all the preparation aspects for
# `config.status': registering the configuration files, the headers,
# the links, and the commands `config.status' will run. There is a
# little mixture though of things actually handled by `configure',
# such as running the `configure' in the sub directories. Minor
# detail.
#
# There are two kinds of commands:
#
# COMMANDS:
#
# They are output into `config.status' via a quoted here doc. These
# commands are always associated to a tag which the user can use to
# tell `config.status' what are the commands she wants to run.
#
# INIT-CMDS:
#
# They are output via an *unquoted* here-doc. As a consequence $var
# will be output as the value of VAR. This is typically used by
# `configure' to give `config,.status' some variables it needs to run
# the COMMANDS. At the difference of `COMMANDS', the INIT-CMDS are
# always run.
#
#
# Some uniformity exists around here, please respect it!
#
# A macro named AC_CONFIG_FOOS has three args: the `TAG...' (or
# `FILE...' when it applies), the `COMMANDS' and the `INIT-CMDS'. It
# first checks that TAG was not registered elsewhere thanks to
# AC_CONFIG_UNIQUE. Then it registers `TAG...' in AC_LIST_FOOS, and for
# each `TAG', a special line in AC_LIST_FOOS_COMMANDS which is used in
# `config.status' like this:
#
# case $ac_tag in
# AC_LIST_FOOS_COMMANDS
# esac
#
# Finally, the `INIT-CMDS' are dumped into a special diversion, via
# `_AC_CONFIG_COMMANDS_INIT'. While `COMMANDS' are output once per TAG,
# `INIT-CMDS' are dumped only once per call to AC_CONFIG_FOOS.
#
# It also leave the TAG in the shell variable ac_config_foo which contains
# those which will actually be executed. In other words:
#
# if false; then
# AC_CONFIG_FOOS(bar, [touch bar])
# fi
#
# will not create bar.
#
# AC_CONFIG_FOOS can be called several times (with different TAGs of
# course).
#
# Because these macros should not output anything, there should be `dnl'
# everywhere. A pain my friend, a pain. So instead in each macro we
# divert(-1) and restore the diversion at the end.
#
#
# Honorable members of this family are AC_CONFIG_FILES,
# AC_CONFIG_HEADERS, AC_CONFIG_LINKS and AC_CONFIG_COMMANDS. Bad boys
# are AC_LINK_FILES, AC_OUTPUT_COMMANDS and AC_OUTPUT when used with
# arguments. False members are AC_CONFIG_SRCDIR, AC_CONFIG_SUBDIRS
# and AC_CONFIG_AUX_DIR. Cousins are AC_CONFIG_COMMANDS_PRE and
# AC_CONFIG_COMMANDS_POST.
# AC_CONFIG_IF_MEMBER(DEST, LIST, ACTION-IF-TRUE, ACTION-IF-FALSE)
# ----------------------------------------------------------------
# If DEST is member of LIST, expand to ACTION-IF-TRUE, else ACTION-IF-FALSE.
#
# LIST is an AC_CONFIG list, i.e., a list of DEST[:SOURCE], separated
# with spaces.
#
# FIXME: This macro is badly designed, but I'm not guilty: m4 is. There
# is just no way to simply compare two strings in m4, but to use pattern
# matching. The big problem is then that the active characters should
# be quoted. Currently `+*.' are quoted.
m4_define([AC_CONFIG_IF_MEMBER],
[ifelse(m4_regexp($2, [\(^\| \)]m4_patsubst([$1],
[\([+*.]\)], [\\\1])[\(:\| \|$\)]),
-1, [$4], [$3])])
# AC_FILE_DEPENDENCY_TRACE(DEST, SOURCE1, [SOURCE2...])
# -----------------------------------------------------
# This macro does nothing, it's a hook to be read with `autoconf --trace'.
# It announces DEST depends upon the SOURCE1 etc.
m4_define([AC_FILE_DEPENDENCY_TRACE], [])
# _AC_CONFIG_DEPENDENCY(DEST, [SOURCE1], [SOURCE2...])
# ----------------------------------------------------
# Be sure that a missing dependency is expressed as a dependency upon
# `DEST.in'.
m4_define([_AC_CONFIG_DEPENDENCY],
[ifval([$2],
[AC_FILE_DEPENDENCY_TRACE($@)],
[AC_FILE_DEPENDENCY_TRACE([$1], [$1.in])])])
# _AC_CONFIG_DEPENDENCIES(DEST[:SOURCE1[:SOURCE2...]]...)
# -------------------------------------------------------
# Declare the DESTs depend upon their SOURCE1 etc.
m4_define([_AC_CONFIG_DEPENDENCIES],
[m4_divert_push([KILL])
AC_FOREACH([AC_File], [$1],
[_AC_CONFIG_DEPENDENCY(m4_patsubst(AC_File, [:], [,]))])
m4_divert_pop()dnl
])
# _AC_CONFIG_UNIQUE(DEST[:SOURCE]...)
# -----------------------------------
#
# Verify that there is no double definition of an output file
# (precisely, guarantees there is no common elements between
# CONFIG_HEADERS, CONFIG_FILES, CONFIG_LINKS, and CONFIG_SUBDIRS).
#
# Note that this macro does not check if the list $[1] itself
# contains doubles.
m4_define([_AC_CONFIG_UNIQUE],
[m4_divert_push([KILL])
AC_FOREACH([AC_File], [$1],
[m4_pushdef([AC_Dest], m4_patsubst(AC_File, [:.*]))
AC_CONFIG_IF_MEMBER(AC_Dest, [AC_LIST_HEADERS],
[AC_FATAL(`AC_Dest' [is already registered with AC_CONFIG_HEADER or AC_CONFIG_HEADERS.])])
AC_CONFIG_IF_MEMBER(AC_Dest, [AC_LIST_LINKS],
[AC_FATAL(`AC_Dest' [is already registered with AC_CONFIG_LINKS.])])
AC_CONFIG_IF_MEMBER(AC_Dest, [_AC_LIST_SUBDIRS],
[AC_FATAL(`AC_Dest' [is already registered with AC_CONFIG_SUBDIRS.])])
AC_CONFIG_IF_MEMBER(AC_Dest, [AC_LIST_COMMANDS],
[AC_FATAL(`AC_Dest' [is already registered with AC_CONFIG_COMMANDS.])])
AC_CONFIG_IF_MEMBER(AC_Dest, [AC_LIST_FILES],
[AC_FATAL(`AC_Dest' [is already registered with AC_CONFIG_FILES or AC_OUTPUT.])])
m4_popdef([AC_Dest])])
m4_divert_pop()dnl
])
# _AC_CONFIG_COMMANDS_INIT([INIT-COMMANDS])
# -----------------------------------------
#
# Register INIT-COMMANDS as command pasted *unquoted* in
# `config.status'. This is typically used to pass variables from
# `configure' to `config.status'. Note that $[1] is not over quoted as
# was the case in AC_OUTPUT_COMMANDS.
m4_define([_AC_CONFIG_COMMANDS_INIT],
[ifval([$1],
[m4_append([_AC_OUTPUT_COMMANDS_INIT], [$1
])])])
# Initialize.
m4_define([_AC_OUTPUT_COMMANDS_INIT])
# AC_CONFIG_COMMANDS(NAME...,[COMMANDS], [INIT-CMDS])
# ---------------------------------------------------
#
# Specify additional commands to be run by config.status. This
# commands must be associated with a NAME, which should be thought
# as the name of a file the COMMANDS create.
AC_DEFUN([AC_CONFIG_COMMANDS],
[m4_divert_push([KILL])
_AC_CONFIG_UNIQUE([$1])
m4_append([AC_LIST_COMMANDS], [ $1])
ifelse([$2],,, [AC_FOREACH([AC_Name], [$1],
[m4_append([AC_LIST_COMMANDS_COMMANDS],
[ ]m4_patsubst(AC_Name, [:.*])[ ) $2 ;;
])])])
_AC_CONFIG_COMMANDS_INIT([$3])
m4_divert_pop()dnl
ac_config_commands="$ac_config_commands $1"
])dnl
# Initialize the lists.
m4_define([AC_LIST_COMMANDS])
m4_define([AC_LIST_COMMANDS_COMMANDS])
# AC_OUTPUT_COMMANDS(EXTRA-CMDS, INIT-CMDS)
# -----------------------------------------
#
# Add additional commands for AC_OUTPUT to put into config.status.
#
# This macro is an obsolete version of AC_CONFIG_COMMANDS. The only
# difficulty in mapping AC_OUTPUT_COMMANDS to AC_CONFIG_COMMANDS is
# to give a unique key. The scheme we have chosen is `default-1',
# `default-2' etc. for each call.
#
# Unfortunately this scheme is fragile: bad things might happen
# if you update an included file and configure.in: you might have
# clashes :( On the other hand, I'd like to avoid weird keys (e.g.,
# depending upon __file__ or the pid).
AU_DEFUN([AC_OUTPUT_COMMANDS],
[m4_define([_AC_OUTPUT_COMMANDS_CNT], m4_incr(_AC_OUTPUT_COMMANDS_CNT))dnl
dnl Double quoted since that was the case in the original macro.
AC_CONFIG_COMMANDS([default-]_AC_OUTPUT_COMMANDS_CNT, [[$1]], [[$2]])dnl
])
# Initialize.
AU_DEFUN([_AC_OUTPUT_COMMANDS_CNT], 0)
# AC_CONFIG_COMMANDS_PRE(CMDS)
# ----------------------------
# Commands to run right before config.status is created. Accumulates.
AC_DEFUN([AC_CONFIG_COMMANDS_PRE],
[m4_append([AC_OUTPUT_COMMANDS_PRE], [$1
])])
# Initialize.
m4_define([AC_OUTPUT_COMMANDS_PRE])
# AC_CONFIG_COMMANDS_POST(CMDS)
# -----------------------------
# Commands to run after config.status was created. Accumulates.
AC_DEFUN([AC_CONFIG_COMMANDS_POST],
[m4_append([AC_OUTPUT_COMMANDS_POST], [$1
])])
# Initialize.
m4_define([AC_OUTPUT_COMMANDS_POST])
# AC_CONFIG_HEADERS(HEADERS..., [COMMANDS], [INIT-CMDS])
# ------------------------------------------------------
# Specify that the HEADERS are to be created by instantiation of the
# AC_DEFINEs. Associate the COMMANDS to the HEADERS. This macro
# accumulates if called several times.
#
# The commands are stored in a growing string AC_LIST_HEADERS_COMMANDS
# which should be used like this:
#
# case $ac_file in
# AC_LIST_HEADERS_COMMANDS
# esac
AC_DEFUN([AC_CONFIG_HEADERS],
[m4_divert_push([KILL])
_AC_CONFIG_UNIQUE([$1])
_AC_CONFIG_DEPENDENCIES([$1])
m4_append([AC_LIST_HEADERS], [ $1])
dnl Register the commands
ifelse([$2],,, [AC_FOREACH([AC_File], [$1],
[m4_append([AC_LIST_HEADERS_COMMANDS],
[ ]m4_patsubst(AC_File, [:.*])[ ) $2 ;;
])])])
_AC_CONFIG_COMMANDS_INIT([$3])
m4_divert_pop()dnl
ac_config_headers="$ac_config_headers $1"
])dnl
# Initialize to empty. It is much easier and uniform to have a config
# list expand to empty when undefined, instead of special casing when
# not defined (since in this case, AC_CONFIG_FOO expands to AC_CONFIG_FOO).
m4_define([AC_LIST_HEADERS])
m4_define([AC_LIST_HEADERS_COMMANDS])
# AC_CONFIG_HEADER(HEADER-TO-CREATE ...)
# --------------------------------------
# FIXME: Make it obsolete?
AC_DEFUN([AC_CONFIG_HEADER],
[AC_CONFIG_HEADERS([$1])])
# AC_CONFIG_LINKS(DEST:SOURCE..., [COMMANDS], [INIT-CMDS])
# --------------------------------------------------------
# Specify that config.status should establish a (symbolic if possible)
# link from TOP_SRCDIR/SOURCE to TOP_SRCDIR/DEST.
# Reject DEST=., because it is makes it hard for ./config.status
# to guess the links to establish (`./config.status .').
AC_DEFUN([AC_CONFIG_LINKS],
[m4_divert_push([KILL])
_AC_CONFIG_UNIQUE([$1])
_AC_CONFIG_DEPENDENCIES([$1])
ifelse(m4_regexp([$1], [^\.:\| \.:]), -1,,
[AC_FATAL([$0: invalid destination: `.'])])
m4_append([AC_LIST_LINKS], [ $1])
dnl Register the commands
ifelse([$2],,, [AC_FOREACH([AC_File], [$1],
[m4_append([AC_LIST_LINKS_COMMANDS],
[ ]m4_patsubst(AC_File, [:.*])[ ) $2 ;;
])])])
_AC_CONFIG_COMMANDS_INIT([$3])
m4_divert_pop()dnl
ac_config_links="$ac_config_links $1"
])dnl
# Initialize the list.
m4_define([AC_LIST_LINKS])
m4_define([AC_LIST_LINKS_COMMANDS])
# AC_LINK_FILES(SOURCE..., DEST...)
# ---------------------------------
# Link each of the existing files SOURCE... to the corresponding
# link name in DEST...
#
# Unfortunately we can't provide a very good autoupdate service here,
# since in `AC_LINK_FILES($from, $to)' it is possible that `$from'
# and `$to' are actually lists. It would then be completely wrong to
# replace it with `AC_CONFIG_LINKS($to:$from). It is possible in the
# case of literal values though, but because I don't think there is any
# interest in creating config links with literal values, no special
# mechanism is implemented to handle them.
#
# _AC_LINK_CNT is used to be robust to multiple calls.
AU_DEFUN([AC_LINK_FILES],
[ifelse($#, 2, ,
[m4_fatal([$0: incorrect number of arguments])])dnl
m4_define([_AC_LINK_FILES_CNT], m4_incr(_AC_LINK_FILES_CNT))dnl
ac_sources="$1"
ac_dests="$2"
while test -n "$ac_sources"; do
set $ac_dests; ac_dest=$[1]; shift; ac_dests=$[*]
set $ac_sources; ac_source=$[1]; shift; ac_sources=$[*]
[ac_config_links_]_AC_LINK_FILES_CNT="$[ac_config_links_]_AC_LINK_FILES_CNT $ac_dest:$ac_source"
done
AC_CONFIG_LINKS($[ac_config_links_]_AC_LINK_FILES_CNT)dnl
],
[
It is technically impossible to `autoupdate' cleanly from AC_LINK_FILES
to AC_CONFIG_FILES. `autoupdate' provides a functional but inelegant
update, you should probably tune the result yourself.])# AC_LINK_FILES
# Initialize.
AU_DEFUN([_AC_LINK_FILES_CNT], 0)
# AC_CONFIG_FILES(FILE..., [COMMANDS], [INIT-CMDS])
# -------------------------------------------------
# Specify output files, as with AC_OUTPUT, i.e., files that are
# configured with AC_SUBST. Associate the COMMANDS to each FILE,
# i.e., when config.status creates FILE, run COMMANDS afterwards.
#
# The commands are stored in a growing string AC_LIST_FILES_COMMANDS
# which should be used like this:
#
# case $ac_file in
# AC_LIST_FILES_COMMANDS
# esac
AC_DEFUN([AC_CONFIG_FILES],
[m4_divert_push([KILL])
_AC_CONFIG_UNIQUE([$1])
_AC_CONFIG_DEPENDENCIES([$1])
m4_append([AC_LIST_FILES], [ $1])
dnl Register the commands.
ifelse([$2],,, [AC_FOREACH([AC_File], [$1],
[m4_append([AC_LIST_FILES_COMMANDS],
[ ]m4_patsubst(AC_File, [:.*])[ ) $2 ;;
])])])
_AC_CONFIG_COMMANDS_INIT([$3])
m4_divert_pop()dnl
ac_config_files="$ac_config_files $1"
])dnl
# Initialize the lists.
m4_define([AC_LIST_FILES])
m4_define([AC_LIST_FILES_COMMANDS])
# AC_CONFIG_SUBDIRS(DIR ...)
# --------------------------
# We define two variables:
# - ac_subdirs_all
# is built in the `default' section, and should contain *all*
# the arguments of AC_CONFIG_SUBDIRS. It is used for --help=recursive.
# It makes no sense for arguments which are sh variables.
# - subdirs
# which is built at runtime, so some of these dirs might not be
# included, if for instance the user refused a part of the tree.
# This is used in _AC_OUTPUT_SUBDIRS.
# _AC_LIST_SUBDIRS is used only for _AC_CONFIG_UNIQUE.
AC_DEFUN([AC_CONFIG_SUBDIRS],
[_AC_CONFIG_UNIQUE([$1])dnl
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
m4_append([_AC_LIST_SUBDIRS], [ $1])dnl
AC_VAR_INDIR_IFELSE([$1],
[AC_DIAGNOSE(syntax,
[$0: you should use literals])])
m4_divert([DEFAULTS], [ac_subdirs_all="$ac_subdirs_all $1"])
AC_SUBST(subdirs, "$subdirs $1")dnl
])
# Initialize the list.
m4_define([_AC_LIST_SUBDIRS])
# autoupdate::AC_OUTPUT([CONFIG_FILES...], [EXTRA-CMDS], [INIT-CMDS])
# -------------------------------------------------------------------
#
# If there are arguments given to AC_OUTPUT, dispatch them to the
# proper modern macros.
AU_DEFUN([AC_OUTPUT],
[m4_ifvanl([$1],
[AC_CONFIG_FILES([$1])])dnl
m4_ifvanl([$2$3],
[AC_CONFIG_COMMANDS(default, [[$2]], [[$3]])])dnl
[AC_OUTPUT]],
[`AC_OUTPUT' should be used without arguments.])
# AC_OUTPUT([CONFIG_FILES...], [EXTRA-CMDS], [INIT-CMDS])
# -------------------------------------------------------
# The big finish.
# Produce config.status, config.h, and links; and configure subdirs.
# The CONFIG_HEADERS are defined in the m4 variable AC_LIST_HEADERS.
# Pay special attention not to have too long here docs: some old
# shells die. Unfortunately the limit is not known precisely...
m4_define([AC_OUTPUT],
[dnl Dispatch the extra arguments to their native macros.
ifval([$1],
[AC_CONFIG_FILES([$1])])dnl
ifval([$2$3],
[AC_CONFIG_COMMANDS(default, [$2], [$3])])dnl
AC_CACHE_SAVE
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub=['/^[ ]*VPATH[ ]*=[^:]*$/d']
fi
ifset([AC_LIST_HEADERS], [DEFS=-DHAVE_CONFIG_H], [AC_OUTPUT_MAKE_DEFS()])
dnl Commands to run before creating config.status.
AC_OUTPUT_COMMANDS_PRE()dnl
# Save into config.log some information that might help in debugging.
echo >&AS_MESSAGE_LOG_FD
echo "Cache variables:" >&AS_MESSAGE_LOG_FD
_AC_CACHE_DUMP | sed 's/^/| /' >&AS_MESSAGE_LOG_FD
echo >&AS_MESSAGE_LOG_FD
echo "confdefs.h:" >&AS_MESSAGE_LOG_FD
sed '/^$/d;s/^/| /' confdefs.h >&AS_MESSAGE_LOG_FD
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
_AC_OUTPUT_CONFIG_STATUS()dnl
ac_clean_files=$ac_clean_files_save
dnl Commands to run after config.status was created
AC_OUTPUT_COMMANDS_POST()dnl
test "$no_create" = yes || $SHELL $CONFIG_STATUS || AS_EXIT([1])
dnl config.status should not do recursion.
AC_PROVIDE_IFELSE([AC_CONFIG_SUBDIRS], [_AC_OUTPUT_SUBDIRS()])dnl
])# AC_OUTPUT
# _AC_OUTPUT_CONFIG_STATUS
# ------------------------
# Produce config.status. Called by AC_OUTPUT.
# Pay special attention not to have too long here docs: some old
# shells die. Unfortunately the limit is not known precisely...
m4_define([_AC_OUTPUT_CONFIG_STATUS],
[AC_MSG_NOTICE([creating $CONFIG_STATUS])
cat >$CONFIG_STATUS <<\_ACEOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
as_me=`echo "$[0]" | sed 's,.*/,,'`
SHELL=${CONFIG_SHELL-/bin/sh}
AS_SHELL_SANITIZE
_AC_INIT_DEFAULTS_FDS
cat >&AS_MESSAGE_LOG_FD << EOF
----------------------------------------------------------------------
This file was extended by $as_me ifset([AC_PACKAGE_STRING],
[(AC_PACKAGE_STRING) ])AC_ACVERSION, executed with
> $[0] $[@]
on `(hostname || uname -n) 2>/dev/null | sed 1q`
EOF
_ACEOF
# Files that config.status was made for.
if test -n "$ac_config_files"; then
echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_headers"; then
echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_links"; then
echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_commands"; then
echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi
cat >>$CONFIG_STATUS <<\EOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $[0] [[OPTIONS]] [[FILE]]...
-h, --help print this help, then exit
-V, --version print version number, then exit
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
ifset([AC_LIST_FILES],
[[ --file=FILE[:TEMPLATE]
instantiate the configuration file FILE
]])dnl
ifset([AC_LIST_HEADERS],
[[ --header=FILE[:TEMPLATE]
instantiate the configuration header FILE
]])dnl
ifset([AC_LIST_FILES],
[Configuration files:
$config_files
])dnl
ifset([AC_LIST_HEADERS],
[Configuration headers:
$config_headers
])dnl
ifset([AC_LIST_LINKS],
[Configuration links:
$config_links
])dnl
ifset([AC_LIST_COMMANDS],
[Configuration commands:
$config_commands
])dnl
Report bugs to <bug-autoconf@gnu.org>."
EOF
cat >>$CONFIG_STATUS <<EOF
ac_cs_version="\\
$CONFIG_STATUS generated by $as_me (Autoconf AC_ACVERSION).
Configured on host $ac_hostname by
`echo "[$]0 $ac_configure_args" | sed 's/[[\\""\`\$]]/\\\\&/g'`"
ac_given_srcdir=$srcdir
AC_PROVIDE_IFELSE([AC_PROG_INSTALL],
[dnl Leave those double quotes here: this $INSTALL is evaluated in a
dnl here document, wbich might result in `ac_given_srcdir=/bin/install -c'.
ac_given_INSTALL="$INSTALL"
])dnl
EOF
cat >>$CONFIG_STATUS <<\EOF
# If no file are specified by the user, then we need to provide default
# value. By we need to know if files were specified by the user.
ac_need_defaults=:
while test $[#] != 0
do
case $[1] in
--*=*)
ac_option=`expr "x$[1]" : 'x\([[^=]]*\)='`
ac_optarg=`expr "x$[1]" : 'x[[^=]]*=\(.*\)'`
shift
set dummy "$ac_option" "$ac_optarg" ${1+"$[@]"}
shift
;;
-*);;
*) # This is not an option, so the user has probably given explicit
# arguments.
ac_need_defaults=false;;
esac
case $[1] in
# Handling of the options.
EOF
cat >>$CONFIG_STATUS <<EOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running $SHELL $[0] " $ac_configure_args " --no-create --no-recursion"
exec $SHELL $[0] $ac_configure_args --no-create --no-recursion ;;
EOF
cat >>$CONFIG_STATUS <<\EOF
--version | --vers* | -V )
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
# Conflict between --help and --header
AC_MSG_ERROR([ambiguous option: $ac_option
Try \`$[0] --help' for more information.]);;
--help | --hel | -h )
echo "$ac_cs_usage"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
shift
CONFIG_FILES="$CONFIG_FILES $[1]"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
shift
CONFIG_HEADERS="$CONFIG_HEADERS $[1]"
ac_need_defaults=false;;
# Handling of arguments.
AC_FOREACH([AC_File], AC_LIST_FILES,
[ 'm4_patsubst(AC_File, [:.*])' )dnl
CONFIG_FILES="$CONFIG_FILES AC_File" ;;
])dnl
AC_FOREACH([AC_File], AC_LIST_LINKS,
[ 'm4_patsubst(AC_File, [:.*])' )dnl
CONFIG_LINKS="$CONFIG_LINKS AC_File" ;;
])dnl
AC_FOREACH([AC_File], AC_LIST_COMMANDS,
[ 'm4_patsubst(AC_File, [:.*])' )dnl
CONFIG_COMMANDS="$CONFIG_COMMANDS AC_File" ;;
])dnl
AC_FOREACH([AC_File], AC_LIST_HEADERS,
[ 'm4_patsubst(AC_File, [:.*])' )dnl
CONFIG_HEADERS="$CONFIG_HEADERS AC_File" ;;
])dnl
# This is an error.
-*) AC_MSG_ERROR([unrecognized option: $[1]
Try \`$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([invalid argument: $[1]]);;
esac
shift
done
EOF
dnl Issue this section only if there were actually config files.
dnl This checks if one of AC_LIST_HEADERS, AC_LIST_FILES, AC_LIST_COMMANDS,
dnl or AC_LIST_LINKS is set.
ifval(AC_LIST_HEADERS()AC_LIST_LINKS()AC_LIST_FILES()AC_LIST_COMMANDS(),
[cat >>$CONFIG_STATUS <<\EOF
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
if $ac_need_defaults; then
ifset([AC_LIST_FILES], [ : ${CONFIG_FILES=$config_files}
])dnl
ifset([AC_LIST_HEADERS], [ : ${CONFIG_HEADERS=$config_headers}
])dnl
ifset([AC_LIST_LINKS], [ : ${CONFIG_LINKS=$config_links}
])dnl
ifset([AC_LIST_COMMANDS], [ : ${CONFIG_COMMANDS=$config_commands}
])dnl
fi
AS_TMPDIR(cs)
EOF
])[]dnl ifval
dnl We output the INIT-CMDS first for obvious reasons :)
ifset([_AC_OUTPUT_COMMANDS_INIT],
[cat >>$CONFIG_STATUS <<EOF
#
# INIT-COMMANDS section.
#
_AC_OUTPUT_COMMANDS_INIT()
EOF])
dnl The following four sections are in charge of their own here
dnl documenting into $CONFIG_STATUS.
ifset([AC_LIST_FILES], [_AC_OUTPUT_FILES()])dnl
ifset([AC_LIST_HEADERS], [_AC_OUTPUT_HEADERS()])dnl
ifset([AC_LIST_LINKS], [_AC_OUTPUT_LINKS()])dnl
ifset([AC_LIST_COMMANDS], [_AC_OUTPUT_COMMANDS()])dnl
cat >>$CONFIG_STATUS <<\EOF
exit 0
EOF
chmod +x $CONFIG_STATUS
])# _AC_OUTPUT_CONFIG_STATUS
# AC_OUTPUT_MAKE_DEFS
# -------------------
# Set the DEFS variable to the -D options determined earlier.
# This is a subroutine of AC_OUTPUT.
# It is called inside configure, outside of config.status.
# Using a here document instead of a string reduces the quoting nightmare.
m4_define([AC_OUTPUT_MAKE_DEFS],
[[# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
# take arguments), then we branch to the cleanup section. Otherwise,
# look for a macro that doesn't take arguments.
cat >confdef2opt.sed <<\EOF
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
t cleanup
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
: cleanup
s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
s,\[,\\&,g
s,\],\\&,g
s,\$,$$,g
EOF
# We use echo to avoid assuming a particular line-breaking character.
# The extra dot is to prevent the shell from consuming trailing
# line-breaks from the sub-command output. A line-break within
# single-quotes doesn't work because, if this script is created in a
# platform that uses two characters for line-breaks (e.g., DOS), tr
# would break.
ac_LF_and_DOT=`echo; echo .`
DEFS=`sed -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
rm -f confdef2opt.sed
]])# AC_OUTPUT_MAKE_DEFS
# _AC_OUTPUT_FILES
# ----------------
# Do the variable substitutions to create the Makefiles or whatever.
# This is a subroutine of AC_OUTPUT.
#
# It has to send itself into $CONFIG_STATUS (eg, via here documents).
# Upon exit, no here document shall be opened.
m4_define([_AC_OUTPUT_FILES],
[cat >>$CONFIG_STATUS <<EOF
#
# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
# Protect against being on the right side of a sed subst in config.status.
dnl Please, pay attention that this sed code depends a lot on the shape
dnl of the sed commands issued by AC_SUBST. So if you change one, change
dnl the other too.
[ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF]
dnl These here document variables are unquoted when configure runs
dnl but quoted when config.status runs, so variables are expanded once.
dnl Insert the sed substitutions of variables.
_AC_SUBST_SED_PROGRAM()dnl
CEOF
EOF
cat >>$CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
dnl One cannot portably go further than 100 commands because of HP-UX.
dnl Here, there are 2 cmd per line, and two cmd are added later.
ac_max_sed_lines=48
ac_sed_frag=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_lines # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
else
sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
fi
if test ! -s $tmp/subs.frag; then
ac_more_lines=false
else
# The purpose of the label and of the branching condition is to
# speed up the sed processing (if there are no `@' at all, there
# is no need to browse any of the substitutions).
# These are the two extra sed commands mentioned above.
(echo [':t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b'] && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
ac_sed_frag=`expr $ac_sed_frag + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
fi # test -n "$CONFIG_FILES"
EOF
cat >>$CONFIG_STATUS <<\EOF
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
ac_dir=`AS_DIRNAME(["$ac_file"])`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
AS_MKDIR_P(["$ac_dir"])
ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo "$ac_dir_suffix" | sed 's,/[[^/]]*,../,g'`
else
ac_dir_suffix= ac_dots=
fi
case $ac_given_srcdir in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots | sed 's,/$,,'`; fi ;;
[[\\/]]* | ?:[[\\/]]* )
srcdir=$ac_given_srcdir$ac_dir_suffix;
top_srcdir=$ac_given_srcdir ;;
*) # Relative path.
srcdir=$ac_dots$ac_given_srcdir$ac_dir_suffix
top_srcdir=$ac_dots$ac_given_srcdir ;;
esac
AC_PROVIDE_IFELSE([AC_PROG_INSTALL],
[ case $ac_given_INSTALL in
[[\\/$]]* | ?:[[\\/]]* ) INSTALL=$ac_given_INSTALL ;;
*) INSTALL=$ac_dots$ac_given_INSTALL ;;
esac
])dnl
if test x"$ac_file" != x-; then
AC_MSG_NOTICE([creating $ac_file])
rm -f "$ac_file"
fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated automatically by config.status. */
configure_input="Generated automatically from `echo $ac_file_in |
sed 's,.*/,,'` by configure."
# Don't redirect the output to AC_FILE directly: use `mv' so that
# updating is atomic, and doesn't need trapping.
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[[\\/$]]* | ?:[[\\/]]*)
# Absolute
test -f "$f" || AC_MSG_ERROR([cannot find input file \\`$f'])
echo $f;;
*) # Relative
if test -f "$f"; then
# Build tree
echo $f
elif test -f "$ac_given_srcdir/$f"; then
# Source tree
echo $ac_given_srcdir/$f
else
# /dev/null tree
AC_MSG_ERROR([cannot find input file \\`$f'])
fi;;
esac
done` || AS_EXIT([1])
EOF
cat >>$CONFIG_STATUS <<EOF
dnl Neutralize VPATH when `$srcdir' = `.'.
sed "$ac_vpsub
dnl Shell code in configure.in might set extrasub.
dnl FIXME: do we really want to maintain this feature?
$extrasub
EOF
cat >>$CONFIG_STATUS <<\EOF
:t
[/@[a-zA-Z_][a-zA-Z_0-9]*@/!b]
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$srcdir,;t t
s,@top_srcdir@,$top_srcdir,;t t
AC_PROVIDE_IFELSE([AC_PROG_INSTALL], [s,@INSTALL@,$INSTALL,;t t
])dnl
dnl The parens around the eval prevent an "illegal io" in Ultrix sh.
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
rm -f $tmp/stdin
dnl This would break Makefile dependencies.
dnl if cmp -s $ac_file $tmp/out 2>/dev/null; then
dnl echo "$ac_file is unchanged"
dnl else
dnl rm -f $ac_file
dnl mv $tmp/out $ac_file
dnl fi
if test x"$ac_file" != x-; then
mv $tmp/out $ac_file
else
cat $tmp/out
rm -f $tmp/out
fi
ifset([AC_LIST_FILES_COMMANDS],
[ # Run the commands associated with the file.
case $ac_file in
AC_LIST_FILES_COMMANDS()dnl
esac
])dnl
done
EOF
])# _AC_OUTPUT_FILES
# _AC_OUTPUT_HEADERS
# ------------------
#
# Output the code which instantiates the `config.h' files from their
# `config.h.in'.
#
# This is a subroutine of _AC_OUTPUT_CONFIG_STATUS. It has to send
# itself into $CONFIG_STATUS (eg, via here documents). Upon exit, no
# here document shall be opened.
#
#
# The code produced used to be extremely costly: there are was a
# single sed script (n lines) handling both `#define' templates,
# `#undef' templates with trailing space, and `#undef' templates
# without trailing spaces. The full script was run on each of the m
# lines of `config.h.in', i.e., about n x m.
#
# Now there are two scripts: `conftest.defines' for the `#define'
# templates, and `conftest.undef' for the `#undef' templates.
#
# Optimization 1. It is incredibly costly to run two `#undef'
# scripts, so just remove trailing spaces first. Removes about a
# third of the cost.
#
# Optimization 2. Since `#define' are rare and obsoleted,
# `conftest.defines' is built and run only if grep says there are
# `#define'. Improves by at least a factor 2, since in addition we
# avoid the cost of *producing* the sed script.
#
# Optimization 3. In each script, first check that the current input
# line is a template. This avoids running the full sed script on
# empty lines and comments (divides the cost by about 3 since each
# template chunk is typically a comment, a template, an empty line).
#
# Optimization 4. Once a substitution performed, since there can be
# only one per line, immediately restart the script on the next input
# line (using the `t' sed instruction). Divides by about 2.
# *Note:* In the case of the AC_SUBST sed script (_AC_OUTPUT_FILES)
# this optimization cannot be applied as is, because there can be
# several substitutions per line.
#
#
# The result is about, hm, ... times blah... plus.... Ahem. The
# result is about much faster.
m4_define([_AC_OUTPUT_HEADERS],
[cat >>$CONFIG_STATUS <<\EOF
#
# CONFIG_HEADER section.
#
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
dnl Double quote for the `[ ]' and `define'.
[ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='[ ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t']
for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
test x"$ac_file" != x- && AC_MSG_NOTICE([creating $ac_file])
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[[\\/$]]* | ?:[[\\/]]*)
# Absolute
test -f "$f" || AC_MSG_ERROR([cannot find input file \\`$f'])
echo $f;;
*) # Relative
if test -f "$f"; then
# Build tree
echo $f
elif test -f "$ac_given_srcdir/$f"; then
# Source tree
echo $ac_given_srcdir/$f
else
# /dev/null tree
AC_MSG_ERROR([cannot find input file \\`$f'])
fi;;
esac
done` || AS_EXIT([1])
# Remove the trailing spaces.
sed 's/[[ ]]*$//' $ac_file_inputs >$tmp/in
EOF
# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h. The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status. Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `cleanup' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions. So we use
# `t cleanup' to jump over the second main sed command when it succeeded.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\EOF
dnl Double quote for `[ ]' and `define'.
[s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\(\([^ (][^ (]*\)([^)]*)\)[ ]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp
t cleanup
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: cleanup]
EOF
# If some macros were called several times there might be several times
# the same #defines, which is useless. Nevertheless, we may not want to
# sort them, since we want the *last* AC_DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\EOF
[s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,]
EOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo ' if egrep ["^[ ]*#[ ]*define"] $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
# Write a limited-size here document to $tmp/defines.sed.
echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#define' lines.
echo ['/^[ ]*#[ ]*define/!b'] >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/defines.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo ' fi # egrep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
echo ['/^[ ]*#[ ]*undef/!b'] >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/undefs.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
rm -f conftest.undefs
mv conftest.tail conftest.undefs
done
rm -f conftest.undefs
dnl Now back to your regularly scheduled config.status.
cat >>$CONFIG_STATUS <<\EOF
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated automatically by config.status. */
if test x"$ac_file" = x-; then
echo "/* Generated automatically by configure. */" >$tmp/config.h
else
echo "/* $ac_file. Generated automatically by configure. */" >$tmp/config.h
fi
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
AC_MSG_NOTICE([$ac_file is unchanged])
else
ac_dir=`AS_DIRNAME(["$ac_file"])`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
AS_MKDIR_P(["$ac_dir"])
fi
rm -f $ac_file
mv $tmp/config.h $ac_file
fi
else
cat $tmp/config.h
rm -f $tmp/config.h
fi
ifset([AC_LIST_HEADERS_COMMANDS],
[ # Run the commands associated with the file.
case $ac_file in
AC_LIST_HEADERS_COMMANDS()dnl
esac
])dnl
done
EOF
])# _AC_OUTPUT_HEADERS
# _AC_OUTPUT_LINKS
# ----------------
# This is a subroutine of AC_OUTPUT.
#
# It has to send itself into $CONFIG_STATUS (eg, via here documents).
# Upon exit, no here document shall be opened.
m4_define([_AC_OUTPUT_LINKS],
[cat >>$CONFIG_STATUS <<\EOF
#
# CONFIG_LINKS section.
#
srcdir=$ac_given_srcdir
dnl Here we use : instead of .. because if AC_LINK_FILES was used
dnl with empty parameters (as in gettext.m4), then we obtain here
dnl `:', which we want to skip. So let's keep a single exception: `:'.
for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
AC_MSG_NOTICE([linking $srcdir/$ac_source to $ac_dest])
if test ! -r $srcdir/$ac_source; then
AC_MSG_ERROR([$srcdir/$ac_source: File not found])
fi
rm -f $ac_dest
# Make relative symlinks.
ac_dest_dir=`AS_DIRNAME(["$ac_dest"])`
if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
AS_MKDIR_P(["$ac_dest_dir"])
ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's,^\./,,'`"
# A "../" for each directory in $ac_dest_dir_suffix.
ac_dots=`echo $ac_dest_dir_suffix|sed 's,/[[^/]]*,../,g'`
else
ac_dest_dir_suffix= ac_dots=
fi
case $srcdir in
[[\\/$]]* | ?:[[\\/]]* ) ac_rel_source=$srcdir/$ac_source ;;
*) ac_rel_source=$ac_dots$srcdir/$ac_source ;;
esac
# Make a symlink if possible; otherwise try a hard link.
if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
ln $srcdir/$ac_source $ac_dest; then :; else
AC_MSG_ERROR([cannot link $ac_dest to $srcdir/$ac_source])
fi
ifset([AC_LIST_LINKS_COMMANDS],
[ # Run the commands associated with the file.
case $ac_file in
AC_LIST_LINKS_COMMANDS()dnl
esac
])dnl
done
EOF
])# _AC_OUTPUT_LINKS
# _AC_OUTPUT_COMMANDS
# -------------------
# This is a subroutine of AC_OUTPUT, in charge of issuing the code
# related to AC_CONFIG_COMMANDS.
#
# It has to send itself into $CONFIG_STATUS (eg, via here documents).
# Upon exit, no here document shall be opened.
m4_define([_AC_OUTPUT_COMMANDS],
[cat >>$CONFIG_STATUS <<\EOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[[^:]]*:,,'`
dnl FIXME: Until Automake uses the new features of config.status, we
dnl should keep this silent. Otherwise, because Automake runs this in
dnl each directory, it quickly becomes annoying.
dnl echo "executing commands of $ac_dest"
case $ac_dest in
AC_LIST_COMMANDS_COMMANDS()dnl
esac
done
EOF
])# _AC_OUTPUT_COMMANDS
# _AC_OUTPUT_SUBDIRS
# ------------------
# This is a subroutine of AC_OUTPUT, but it does not go into
# config.status, rather, it is called after running config.status.
m4_define([_AC_OUTPUT_SUBDIRS],
[
#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
AC_PROVIDE_IFELSE([AC_PROG_INSTALL],
[ ac_given_INSTALL=$INSTALL
])dnl
for ac_subdir in : $subdirs; do test "x$ac_subdir" = x: && continue
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
test -d $srcdir/$ac_subdir || continue
AC_MSG_NOTICE([configuring in $ac_subdir])
case $srcdir in
.) ;;
*) AS_MKDIR_P(["./$ac_subdir"])
if test -d ./$ac_subdir; then :;
else
AC_MSG_ERROR([cannot create `pwd`/$ac_subdir])
fi
;;
esac
ac_popdir=`pwd`
cd $ac_subdir
# A "../" for each directory in /$ac_subdir.
ac_dots=`echo $ac_subdir |
sed 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g'`
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
[[\\/]]* | ?:[[\\/]]* ) # Absolute path.
ac_sub_srcdir=$srcdir/$ac_subdir ;;
*) # Relative path.
ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
esac
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_sub_srcdir/configure.gnu; then
ac_sub_configure="$SHELL $ac_sub_srcdir/configure.gnu"
elif test -f $ac_sub_srcdir/configure; then
ac_sub_configure="$SHELL $ac_sub_srcdir/configure"
elif test -f $ac_sub_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
AC_MSG_WARN([no configuration information is in $ac_subdir])
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[[\\/]]* | ?:[[\\/]]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file=$ac_dots$cache_file ;;
esac
AC_PROVIDE_IFELSE([AC_PROG_INSTALL],
[ case $ac_given_INSTALL in
[[\\/$]]* | ?:[[\\/]]*) INSTALL=$ac_given_INSTALL ;;
*) INSTALL=$ac_dots$ac_given_INSTALL ;;
esac
])dnl
AC_MSG_NOTICE([running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir])
# The eval makes quoting arguments work.
if eval $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
then :
else
AC_MSG_ERROR([$ac_sub_configure failed for $ac_subdir])
fi
fi
cd $ac_popdir
done
fi
])# _AC_OUTPUT_SUBDIRS
# AC_LINKER_OPTION(LINKER-OPTIONS, SHELL-VARIABLE)
# ------------------------------------------------
#
# Specifying options to the compiler (whether it be the C, C++ or
# Fortran 77 compiler) that are meant for the linker is compiler
# dependent. This macro lets you give options to the compiler that
# are meant for the linker in a portable, compiler-independent way.
#
# This macro take two arguments, a list of linker options that the
# compiler should pass to the linker (LINKER-OPTIONS) and the name of
# a shell variable (SHELL-VARIABLE). The list of linker options are
# appended to the shell variable in a compiler-dependent way.
#
# For example, if the selected language is C, then this:
#
# AC_LINKER_OPTION([-R /usr/local/lib/foo], foo_LDFLAGS)
#
# will expand into this if the selected C compiler is gcc:
#
# foo_LDFLAGS="-Xlinker -R -Xlinker /usr/local/lib/foo"
#
# otherwise, it will expand into this:
#
# foo_LDFLAGS"-R /usr/local/lib/foo"
#
# You are encouraged to add support for compilers that this macro
# doesn't currently support.
# FIXME: Get rid of this macro.
AC_DEFUN([AC_LINKER_OPTION],
[if test "$ac_compiler_gnu" = yes; then
for ac_link_opt in $1; do
$2="[$]$2 -Xlinker $ac_link_opt"
done
else
$2="[$]$2 $1"
fi])
# AC_LIST_MEMBER_OF(ELEMENT, LIST, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# --------------------------------------------------------------------------
#
# Processing the elements of a list is tedious in shell programming,
# as lists tend to be implemented as space delimited strings.
#
# This macro searches LIST for ELEMENT, and executes ACTION-IF-FOUND
# if ELEMENT is a member of LIST, otherwise it executes
# ACTION-IF-NOT-FOUND.
AC_DEFUN([AC_LIST_MEMBER_OF],
[dnl Do some sanity checking of the arguments.
ifelse([$1], , [AC_FATAL([$0]: missing argument 1)])dnl
ifelse([$2], , [AC_FATAL([$0]: missing argument 2)])dnl
ac_exists=false
for ac_i in $2; do
if test x"$1" = x"$ac_i"; then
ac_exists=true
break
fi
done
AS_IFELSE([test x"$ac_exists" = xtrue], [$3], [$4])
])