so that ac_abs_builddir, ac_abs_top_builddir, ac_abs_srcdir,
and ac_abs_top_srcdir are absolute paths.
* lib/m4sugar/m4sh.m4 (AS_SET_CATFILE): Remove misleading comment.
including when the cache is used.
There are still several issues: (i) there are too many runs of m4
(one for include, one for warnings, and some more), (ii) warnings
spreading on several lines are not handled gracefully, (iii) the
code meant to have the call stack display for errors does not work
(its handling should move from m4 to autom4te).
* bin/autom4te.in Autom4te::Channels, Autom4te::ChannelDefs):
Use them.
(@preselect): Add m4_warn.
($exit_status): Remove, use $exit_code.
($help): Use Autom4te::ChannelDefs::usage.
(&handle_m4): No longer define the m4_warnings.
At each run, extract and report the warnings.
Always cache the result, including if the exit status is on
failure, since if nothing changes, we should result in the same
failure, hence we can use the cache.
* lib/m4sugar/m4sugar.m4 (m4_warning_ifelse, _m4_warning_ifelse)
(_m4_warning_error_ifelse, __m4_warning_error_ifelse, _m4_warn):
Remove.
(m4_warn): Redefine as a do-nothing: it is its invocation that
matters, as warnings are now reported via traces.
* lib/autoconf/general.m4 (AC_DIAGNOSE): Don't make it a copy of
the contents of m4_warn: make it _call_ m4_warn, so that tracing
the latter reveals calls to the former.
Adjust the tests.
* tests/m4sugar.at (m4@&t@_warn): Use existing warning categories.
Remove.
We _have_ to stop using the old compatibility scheme that tried to
avoid useless backslashes because Libtool 1.4.3 contains a
AC_DEFINE([error_t], [int],
[Define to a type to use for `error_t' if it is not
otherwise available.])
We _have_ to quote the single quote and backslashes with . The
old compatibility scheme saw that ` was backslashed, and therefore
did not quote the single quote. Hence before this patch, Autoconf
was not compatible with Libtool.
* lib/autoconf/autoconf.m4: Include it.
* lib/autoconf/functions.m4: Use AN_FUNCTION for all the functions
that were listed in the original autoscan.list.
* lib/autoconf/headers.m4: Similarly with headers.
* lib/freeze.mk (autoconf_m4f_dependencies): Add autoscan.m4.
(.m4.m4f): Don't pass --prepend-include, since that's done by
tests/autom4te itself.
* lib/autoscan/Makefile.am: Include freeze.mk.
(autoscan.list): New target --this file is no longer a source.
(autoscan.pre): New file.
from /tmp.
Thanks to Bill Moseley and Paul Eggert.
* lib/m4sugar/m4sh.m4 (AS_TMPDIR): $2 is the directory into which
the tmpdir must be created.
* lib/autoconf/status.m4 (_AC_OUTPUT_CONFIG_STATUS): Have the tmp
dir be in the build tree, instead of $TMPDIR.
workaround for ${1+"$@"}.
* doc/autoconf.texi (Shell Substitutions): Explain it.
From Oliver Kiddle and Peter Stephenson.
Have M4sh perform minimal shell sanitizing.
* lib/m4sugar/m4sh.at (AS_SHELL_SANITIZE): Split the `_AS_PREPARE_*'
part into...
(_AS_PREPARE): this new macro.
(AS_PREPARE): New.
(AS_INIT): Invoke AS_SHELL_SANITIZE.
* tests/m4sh.at (AT_DATA_LINENO): Use _AS_PREPARE.
Adjust Autoconf and Autotest.
* lib/autoconf/general.m4 (_AC_INIT_DEFAULTS): Don't invoke
AS_SHELL_SANITIZE, AS_INIT did it, but invoke AS_PREPARE.
* lib/autotest/general.m4 (AT_INIT): Likewise.
* lib/autoconf/status.m4 (_AC_OUTPUT_CONFIG_STATUS):
Invoke _AS_PREPARE (not AS_PREPARE) in addition to
AS_SHELL_SANITIZE.
Use this M4sh to generate Autoconf's shell scripts.
* tests/wrapsh.as: New, precursor of wrapsh.in.
* tests/Makefile.am: Include lib/freeze.mk to get the dependencies
on Autotest and M4sh.
($(TESTSUITE)): Use $(autotest_m4f_dependencies).
(wrapsh.in): New target.
* bin/autoconf.as: New, precursor of autoconf.in.
(autoconf.in): New target.
* config/auxdir.m4, config/cond.m4, config/depend.m4,
* config/init.m4, config/install-sh.m4, config/lispdir.m4,
* config/missing.m4, config/sanity.m4, config/select.m4,
* config/strip.m4: Remove, to ease sync'ing with any version of
Automake.
trailing files, don't apply `-rf' to files which might not be
created by configure (core, core.*, and *.core), but just `rm -f'.
Suggested by Jonathan Kamens.
Remove, replaced by...
* tests/wrappl.in: Be common for all the Perl executables.
In particular autoscan and autoheader want -I.
* configure.ac: Adjust.
* lib/autoscan/headers: errno.h is portable.
ac_buildpath, ac_top_buildpath, ac_srcpath, and ac_top_srcpath.
(_AC_OUTPUT_FILES): Also substitute srcpath, top_srcpath,
builddir, buildpath, top_builddir, and top_buildpath.
(_AC_OUTPUT_SUBDIRS): Compute the dir variables *before* changing
the current directory.
* lib/autoconf/general.m4 (_AC_INIT_HELP): Compute the dir
variables *before* changing the current directory.
Skip nonexistent dirs.
* doc/autoconf.texi (Preset Output Variables): Document these
variables.
* lib/autotest/general.m4: Do not reset AT_victims.
Don't compute at_srcdir nor at_top_srcdir.
* tests/tools.at: Hence use top_srcdir.
* tests/Makefile.am, tests/autoconf, tests/autoheader,
* tests/autom4te, tests/autoreconf, tests/autoupdate, tests/ifnames:
Remove.
* tests/autoreconf.in, tests/wrappl.in, tests/autom4te.in,
* tests/wrapsh.in, tests/autoupdate.in: New.
* tests/Makefile.am (DISTCLEANFILES, EXTRA_DIST): Adjust.
* configure.ac: Build the position independent wrappers.
* man/Makefile.am: Now that test wrappers are position
independent, use them and drop dark envvar magic.
doesn't neutralize SIGINT, making autoconf etc. non interruptible.
* lib/autoconf/autotest.m4 (AC_CONFIG_TESTDIR): Move the package
related variables into `at_package_*'.
* lib/autotest/general.m4 (AT_VICTIMS): New.
(AT_INIT): Adjust for stand-alone/embedded test suites.
(AS_MESSAGE_LOG_FD): Define and use it.
* tests/suite.at (AT_VICTIMS): Use it.
* tests/tools.at (autoupdating AC_PREREQ): Don't depend upon
at_version.
* bin/autom4te.in (&find_file): Support `FILE?' standing for
optionally `FILE'.
Use -e, not -f, since /dev/null for instance is OK.
(&parse_args): Adjust.
* lib/autom4te.in (Autoconf): Add `acsite.m4?' and `aclocal.m4?'.
* Makefile.am (AUTOMAKE_OPTIONS): Add 1.5 and dist-bzip2.
(AMTAR): Help automake define it.
(INSTALL, install-data-hook): The INSTALL.txt trick is no longer
needed, 1.5 can have a macro and a target with the same name.
* m4/auxdir.m4, m4/cond.m4, m4/depend.m4, m4/install-sh.m4,
* m4/strip.m4: New.
* m4/init.m4, m4/sanity.m4: Update.
* doc/Makefile.am (CLEANFILES): 1.5 knows the texi2dvi files.
* lib/autoconf/Makefile.am, lib/autotest/Makefile.am,
* lib/m4sugar/Makefile.am, lib/autoscan/Makefile.am,
* lib/Autom4te/Makefile.am, man/Makefile.am: Use dist/nodist.
